| Product | Description | |
|---|---|---|
| AC1000 | AC1000. Multipurpose Acid Wash. DESCRIPTION. Heavy duty concentrated acid based formulation designed to remove calcium, rust, lime and scale from most surfaces. Simply spray on neat, leave for 5-10 minutes and high pressure wash off. Completely biodegradable and non-caustic. USE: Can be diluted up to 100 times with water depending on the application. For use on boat hulls, decks, trailers, vehicles and many other applications. Always apply to a test area first and wash with potable water after use. SAFETY: Irritating to eyes and skin. Keep out of reach of children. Avoid contact with skin and eyes. Read Material Safety Data Sheet before use. WARNING: Contains 300g/l of Phosphoric Acid. Corrosive Class 8 UN-1805 PGIII. Uses: Cleaning & Maintenance, Vehicle Detailing. Product ID: 903. Categories: Cleaning & Maintenance, Vehicle Detailing. |  Western Australia |
| ACLube | ACLube: ANTI CORROSION LUBRICANT Displaces moisture, penetrates rusted parts, lubricates, stops squeaks, cleans surfaces, & protects them from corrosion. Numerous uses in automotive & marine maintenance, transport, engineering, industrial & commercial equipment. Categories: Mining, Industrial, Mechanical, Marine, LUBRICANTS | Western Australia |
| AirFresh | AirFresh: SPRAY REODORANT, A blend of fresh & natural perfume oils that helps minimize odours and mustiness, leaves a pleasant long lasting fragrance. Ideal for use around all commercial & domestic bathrooms, kitchens, living areas, offices & motor vehicles. Categories: Industrial, Mechanical, Cleaning, Marine, SPRAY REODORANTS | Western Australia |
| AIR FRESH | All Purpose Air Freshener. Description. AirFresh can be used in all areas where unpleasant smells occur, or whenever a fresh enhancing fragrance is desired. Air Fresh is ideal for use around all commercial and domestic bathrooms, kitchens, living areas etc, as well as in offices and motor vehicles. Use. Simply spray area to be treated using a trigger spray or atomizer. Safety. Keep out of reach from children. Uses: Vehicle Detailing. Product ID: 168. Categories: Vehicle Detailing. | Western Australia |
| Auto Carwash Detergents | Auto Carwash Detergents: Range of concentrated liquid washing compounds, waxes and deodorizers for either manual or automatic dispensing in commercial carwash systems. - Foaming Brush Detergent - Foaming Pre-soak - High Pressure Detergent - Tyre & Engine Cleaner. Categories: Mechanical, Car Grooming & Detailing Products | Western Australia |
| Barrier Cream | Barrier Cream: Use in workshop areas or around the home for protection of the hands. Contains purified water, lanolin, dimethicone, emollients, natural oils and sanitizers. Categories: Mining, Industrial, Mechanical, Cleaning, Agricultural, Barrier Creams | Western Australia |
| Bathroom Scale Remover | Bathroom Scale Remover: Spray-on cleaner for removing soap scum, hard water stains and scale from bathroom walls and fittings. Categories: Bathroom & Washroom Cleaning, | Western Australia |
| BIOMAX DEGREASER | Biomax WATER-BASED DEGREASER. DESCRIPTION: This super strength water-based degreaser rapidly cleans oil, grease and grime from bilges, engines, bulkheads, compressors, floors and decks. It will help reduce fumes and fire danger. It is non-toxic, non-caustic, non-flammable, biodegradable and solvent-free. Approved by the Dept. of Primary Industry and Energy for use in export registered meat establishments. USES: Bilges: Add 1 - 5 L Biomaxper 25 L bilge water, depending on condition. Leave for up to 12 hours and then flush twice. Engines, Bulkheads, Machinery: Brush on Biomaxundiluted, or mix 1 part to 3 parts with water, depending on the degree of soiling. Then wash clean. General Cleaning: may be used as supplied for heavy soiling, and should be applied by brush in such instances. Allow to penetrate for 1 minute and then hose off with strong jet of water. It may also be diluted and used through pressure washers, steam cleaners and automatic scrubbers. For lighter soiling it may be diluted by up to 1:100 in hot or cold water. SAFETY: Biomaxis not classified as hazardous. Avoid contact with skin and eyes. Keep out of reach of children. Read the Material Safety Data Sheet before. Uses: Cleaning & Maintenance, Industrial Products. Product ID: 74. Categories: Cleaning & Maintenance, Industrial Products. | Western Australia |
| Blue Power | This is a high quality Urea solution especially developed for the automotive SCR catalytic converter and used for the reduction of emissions in Euro 4 and Euro 5 commercial diesel vehicles. By injecting Blue Power directly into the exhaust system to combine with exhaust gasses in the catalytic converter all harmful nitrogen oxides (NOx) are immediately reduced into harmless nitrogen and water. This results in increased power and torque along with an extended service lifetime for vehicles. Uses: Fuel & Oil Treatments. Product ID: 169. Categories: Fuel & Oil Treatments. | Western Australia |
| Blue Power | Blue Power: High quality Urea solution developed for the automotive SCR catalytic converter for the reduction of emissions in Euro 4 and Euro 5 commercial diesel vehicles. Reduces nitrogen oxide (Nox) into harmless nitrogen and water, increasing power and torque. Categories: Mining, Industrial, Mechanical, Agricultural | Western Australia |
| BOAT WASH | Environmentally Friendly Boat wash. This non-caustic, solvent less degreasing detergent is biodegradable and contains powerful high-foam surface-active agents and emulsifiers for the rapid removal of all types of dirt and grime from all types of surfaces. It is a highly efficient streak-free degreasing cleaner for the hand or machine washing of boats, trailers and other vehicles. It has numerous applications in marine and industrial areas. Boat Wash is water-based and contains no ammonia, caustic or acid ingredients, petroleum hydrocarbons or chlorinated solvents. USE. First hose all loose dirt and mud from surface to be cleaned. For general cleaning use 5-10 mls Boat Wash per litre of water. Clean boats manually or by foam guns. For other hard surfaces, steam cleaners, automatic scrubbers or pressure washers may also be used For severe soil buildup, greater concentrations (up to 50%) may be used, followed by immediate rinsing. Hose off residues thoroughly. To avoid hard water spotting, dry surfaces with soft towel or chamois. May not be suitable for boats with badly weathered, flaking or rusted paintwork. SAFETY. Boat Wash is not classified as hazardous. Read Material Safety Data Sheet before use. Wear protective gloves if skin is sensitive to detergents. Spillages may be slippery. Uses: Marine Products. Product ID: 557. Categories: Marine Products. | Western Australia |
| Body Wash | Body Wash: multi-purpose hair and body wash that removes dirt and grease. Containing natural coconut oil derivatives and emollients that leaves skin and hair feeling soft, clean and revitalized. Categories: Cleaning, Soaps & Body Washes | Western Australia |
| Carbon Flush | A high strength blend of solvents, surface active agents and sludge dispersants. Cleans valves, injectors and combustion chambers restoring power and improving economy. Uses: Fuel & Oil Treatments. Product ID: 173. Categories: Fuel & Oil Treatments. | Western Australia |
| Car, Tractor and Truck Wash | Car, Tractor and Truck Wash: A highly efficient streak-free cleaner for the hand or machine washing of cars, trucks, buses. Available in Premium & Economy. Categories: Mining, Industrial, Mechanical, Agricultural, Marine, Transport Cleaning Products, Vehicle Cleaning , Car Grooming Suppliers. | Western Australia |
| Car Wash & Wax | Car Wash & Wax: specially formulated concentrated car wash with built in wax for extra shine and paint protection. A triple action cleaner, degreaser and wax based product that is highly concentrated for economical use. Biodegradable, non flammable and non corrosive. Categories: Mining, Industrial, Mechanical, Car Grooming, Protectant Car Detailing, Automotive Cleaners & Car Care Cleaning Products | Western Australia |
| Cereal Blend | Cereal Blend: This organic-enriched fertilizer concentrate has been specifically developed for application to cereal crops including wheat, barley, oats, triticale, sorghum, soybean, maize. Categories: Agricultural, Fertilisers | Western Australia |
| Chemsol Australia - Toll Blending. Chemsol is an Australian owned company which has been established for over 20 years. We are based in the Bibra Lake Industrial area in Western Australia and are accredited to International Quality Management Standard ISO 9001. | We offer a liquid Toll Blending service which incorporates technical advice, product formulation and chemical blending in our modern factory with the capacity to service all areas in WA including the mining areas in the northwest. Contract toll blending or manufacturing is carried out by experienced staff and each product manufactured goes through an established process from the initial batch sheet through to sampling and final analysis in our laboratory. Our toll blending service can include the following:- Product formulation and development; Blending and manufacturing to clients formulations; Sourcing and supply of raw materials; Batching to suit quantities specified; Product supply in bulk; Packaging & labeling (including professional design); Documented Quality Control and laboratory analysis reports; Contract storage; Delivery either locally, nationally or internationally. We manufacture products for a large range of brand names both in Australia and internationally and we have the expertise to provide toll blending at the highest level. Categories: Toll Manufacturers, CONTRACT PACKAGING, Chemical Packers & Blenders, Contract chemical manufactures. | Western Australia |
| Citrisan | Citrisan: ORANGE OIL DEGREASER A unique non-caustic water and orange-oil based formulation is designed to clean, degrease & sanitise process equipment, floors, walls, ablution areas, ship bilges, bulkheads, trucks, locos & rolling stock, engines and much more. Categories: Mining, Industrial, Agricultural, Marine, Cleaning, DEGREASERS | Western Australia |
| CITRISAN | ORANGE OIL DEGREASER. DESCRIPTION. This unique non-caustic water and orange-oil based formulation is designed to clean, degrease and sanitise processing equipment, floors , walls and ablution areas, ship bilges and bulkheads, trucks, locos and rolling stock, engines, compressors and workshop equipment, mining machinery, etc. CitriSan contains orange oil, water conditioners, surface-active agents, emulsifiers and sanitisers. USE. For general cleaning, CitriSan may be diluted 1:20 to 1:100 in hot or cold water and used through pressure washers, steam cleaners, automatic scrubbers, or applied by mop and bucket, or as a spray and wipe. CitriSan may be used as -supplied for heavy soiling , and should be applied by brush in such instances. Allow to penetrate for 1 minute and hose off with a strong jet of water. For ships bilges, add 1-5 litres CitriSan per 25 litres bilge water, depending on condition. Leave for upto 12 hours, then flush twice. If used in food processing areas, surfaces should be thoroughly rinsed with potable water. SAFETY: Keep out of reach of children. Avoid contact with skin and eyes. Read Material Safety Data Sheet before use. Uses: Cleaning & Maintenance, Industrial Products, Vehicle Detailing. Product ID: 541. Categories: Cleaning & Maintenance, Industrial Products, Vehicle Detailing. | Western Australia |
| CITROL HAND CLEANER | Citrol Hand Cleaner is a premium quality, pH-neutral, biodegradable liquid derived from a special blend of natural orange oil, coconut oil derivatives, surface-active agents, emulsifiers and emollients. Citrol Hand Cleaner displays excellent cleaning and degreasing properties in hard or soft water , and contains no harsh solvents or alkalis. It is an ideal and economical hand cleaner for use in all workshops, commercial kitchens, institutions and homes. Uses: Cleaning & Maintenance. Product ID: 177. Categories: Cleaning & Maintenance. | Western Australia |
| CITROL HD HAND CLEANER | Citrol HD Hand Cleaner is an abrasive hand cleaner particularly suited to situations where heavy soiling of hands such as in industrial and mechanical workshops. Citrol HD Hand Cleaner displays excellent cleaning and degreasing properties in hard or soft water , and contains no harsh solvents or alkalis. Uses: Cleaning & Maintenance. Product ID: 179. Categories: Cleaning & Maintenance. | Western Australia |
| CLEANER AND DEODORISER | Disinfectant and Deodorizer. This unique non-caustic water and orange-oil based formulation is designed to clean, degrease and sanitise processing equipment, floors , walls and ablution areas, ship bilges and bulkheads, trucks, locos and rolling stock, engines, compressors and workshop equipment, mining machinery, etc. This Cleaner and Deodoriser contains orange oil, water conditioners, surface-active agents, emulsifiers and sanitisers. USE. For general cleaning, may be diluted 1:20 to 1:100 in hot or cold water and used through pressure washers, steam cleaners, automatic scrubbers, or applied by mop and bucket, or as a spray and wipe. May be used as supplied for heavy soiling , and should be applied by brush in such instances. Allow to penetrate for 1 minute and hose off with a strong jet of water. For ships bilges, add 1-5 litres per 25 litres bilge water, depending on condition. Leave for up to 12 hours, then flush twice. If used in food processing areas, surfaces should be thoroughly rinsed with potable water. SAFETY. Keep out of reach of children. Avoid contact with skin and eyes. Read Material Safety Data Sheet before use. Uses: Marine Products. Product ID: 552. Categories: Marine Products. | Western Australia |
| COOL FLUSH | Cool Flush is a specially formulated liquid for removing sludge, grease and scale from radiators and engine water jackets. Cool Flush is non-acidic , solvent less and biodegradable and is safe to use on both cast iron and aluminium alloy. It will not adversely affect water pump seals or radiator hoses. Uses: Cooling Systems. Product ID: 79. Categories: Cooling Systems. | Western Australia |
| Cooling System Antifreeze/ Antiboil - GMH Spec | Cooling System Antifreeze/ Antiboil - GMH Spec: Concentrated glycol based treatment for automotive cooling systems. ASTM D1384, ASTM D4340, ASTM D2570, ASTM D2809, AS 2108, GM HN2083. - Concentrate - Ready-To-Use; 50% - Ready-To-Use; 40%. Categories: Mining, Industrial, Mechanical, Agricultural | Western Australia |
| Cooling System Flush | Cooling System Flush: Specially formulated liquid for removing sludge, grease and scale from radiators & engine water jackets. Non-acidic, solvent less, biodegradable. Categories: Mechanical, Automotive Products, Radiator Flush | Western Australia |
| Cooling System StopLeak | Cooling System StopLeak: Provides temporary repair of radiator leaks and seepage from radiator hoses and gaskets, and reduces loss of coolant from the cooling system. Contains lubricating heat-sensitive synthetic polymers and is free from abrasive mineral fibres. Categories: Mechanical, Automotive Products, Radiator Fluids | Western Australia |
| COOLING SYSTEM STOP LEAK | Cooling System StopLeak is a specially formulated liquid designed to provide temporary repair of radiator leaks and seepage from radiator hoses and gaskets, and to reduce the loss of coolant from the cooling system. Cooling System StopLeak contains lubricating heat-sensitive synthetic polymers and is free from abrasive mineral fibres. Uses: Cooling Systems. Product ID: 178. Categories: Cooling Systems. | Western Australia |
| COOL MAX 100 | This is a general purpose ready to use glycol based treatment for automotive cooling systems. Freezing point is -35 degrees C approx at 50% dilution and -15 degrees C at 35% dilution. Replace at 24 month / 60,000 km intervals. May be replaced more frequently depending on engine and driving conditions. Top up radiator as required to avoid rundown in concentration. This product contains a pH-buffered blend of additives known to reduce the corrosion of steel, cast iron, aluminium alloy, brass, copper and solder. This product exceeds the performance requirements of the following standards when assessed in hard water and is made to General Motors Specification HN 2043. ASTM D1384 " Corrosion Test for Engine Coolants in Glassware.". ASTM D4340 "Corrosion of Cast Aluminium Alloys in Engine Coolants Under Heat Rejecting Conditions.". ASTM D2570 "Simulated Service Corrosion Test for Engine Coolants.". ASTM D2809 "Cavitation Corrosion and Erosion Corrosion Characteristics of Aluminium Pumps With Engine Coolants.". Australian/New Zealand Standard 2108.1:1997 "Engine Coolants Type A and Type B for Engine Cooling Systems.". This product will not reverse pre-existing corrosion problems, and should not be used in conflict with engine manufacturer's recommendations. Uses: Cooling Systems. Product ID: 229. Categories: Cooling Systems. | Western Australia |
| COOL MAX 50 | COOL MAX 50 general purpose concentrated glycol based treatment for automotive cooling systems. Freezing point is -35 degrees C approx. Replace at 24 month / 60,000 km intervals. May be replaced more frequently depending on engine and driving conditions. This product contains a pH-buffered blend of additives known to reduce the corrosion of steel, cast iron, aluminium alloy, brass, copper and solder. It exceeds the performance requirements of the following standards when assessed in hard water and is made to General Motors Specification HN 2043. ASTM D1384 " Corrosion Test for Engine Coolants in Glassware.". ASTM D4340 "Corrosion of Cast Aluminium Alloys in Engine Coolants Under Heat Rejecting Conditions.". ASTM D2570 "Simulated Service Corrosion Test for Engine Coolants.". ASTM D2809 "Cavitation Corrosion and Erosion Corrosion Characteristics of Aluminium Pumps With Engine Coolants.". Australian/New Zealand Standard 2108.1:1997 "Engine Coolants Type A and Type B for Engine Cooling Systems.". This product will not reverse pre-existing corrosion problems, and should not be used in conflict with engine manufacturer's recommendations. Uses: Cooling Systems. Product ID: 221. Categories: Cooling Systems. | Western Australia |
| COOL PLUS CONCENTRATE | This is can be purchased as a concentrated or ready to use organic acid, water-based treatment for automotive cooling systems. It is a phosphate and silicate-free formulation containing a pH-buffered blend of additives known to reduce the corrosion of steel, cast iron, aluminium alloy, brass, copper and solder. It will not reverse pre-existing corrosion problems. It is not an anti-freeze/anti-boil type coolant and should not be used in conflict with engine manufacturers' recommendations. Cool Plus exceed the performance requirements of the following standards: ASTM D1384 "Corrosion Test for Engine Coolants in Glassware" using 20 ml per litre hard water. ASTM D4340 "Corrosion of Cast Aluminium Alloys in Engine Coolants under Heat Rejecting Conditions" using 20ml per litre hard water. Australian/New Zealand Standard 2108.1:1997 "Engine Coolants Type A and Type B for Engine Cooling Systems" using 20-30 ml per litre hard water. Uses: Cooling Systems. Product ID: 233. Categories: Cooling Systems. | Western Australia |
| COOL PLUS MAX | COOL PLUS MAX DESCRIPTION. COOL PLUS MAX is a superior water based corrosion inhibitor based on Organic Additive Technology (OAT), which is a selectively balanced mixture of organic additives. OAT formulations are longer life products than those based on conventional formulations, making OATs the products of choice for general aftermarket servicing. 1:20 Mixing ratio. COOLPLUS MAX is a phosphate ,amine, nitirite and silicate-free formulation containing a pH-buffered blend of additives known to reduce the corrosion of steel, cast iron, aluminium alloy, brass, copper and solder .... Contains 400g per litre of ethylene glycol as well as a bittering agent at 10ppm. Available in red or green. USE. Add 50ml of COOL PLUS MAX to every 1L of demineralised water or 1L of Cool Plus Max treats 20L of demineralised water. Dilute product before adding to the cooling system. To avoid possible incompatibility problems, do not mix with any other inhibitors or coolants. SAFETY. COOL PLUS MAX contains ethylene glycol and is poisonous if swallowed. Read Material Safety Data Sheet before use. Avoid contact with the skin and eyes. Keep out of reach of children. COOL PLUS MAX. Exceeds the performance requirements of the following standards. ASTM D1384 Corrosion Test for Engine Coolants in Glassware. ASTM D4340 Corrosion of Cast Aluminium Alloys in Engine Coolants under Heat Rejecting Conditions. Australian/New Zealand Standard 2108.1:2004 "Engine Coolants Type A and Type B for Engine Cooling Systems" using 40 ml per litre hard water. Heat-stressed Alloy Corrosion: ASTM D4340. Heat Transfer Corrosion Rate: 0.3 mg/cm2/week. Max allowable corrosion: 1.0 mg/cm2/week. Crevice/pitting Attack: None. Uses: Cooling Systems. Product ID: 447. Categories: Cooling Systems. | Western Australia |
| COOL PLUS RTU | This is a ready to use organic acid, water-based treatment for automotive cooling systems. It is a phosphate and silicate-free formulation containing a pH-buffered blend of additives known to reduce the corrosion of steel, cast iron, aluminium alloy, brass, copper and solder. It will not reverse pre-existing corrosion problems. It is not an anti-freeze/anti-boil type coolant and should not be used in conflict with engine manufacturers' recommendations. Cool Plus RTU exceeds the performance requirements of the following standards: See Cool Plus. Uses: Cooling Systems. Product ID: 235. Categories: Cooling Systems. | Western Australia |
| COOLTECH | LONG LIFE ANTIFREEZE ANTIBOIL. DESCRIPTION. COOLTECH was designed to generally exceed the broad range of national, international and OEM standards so workshops can SAVE MONEY by having one coolant to do a wide range of vehicles. (Ref Standards list) Cooltech is recommended for all general aftermarket servicing of the trucking, mining, transport and general automotive industries. Mixing ratio 2:1. COOLTECH has a maximum service life of 4 years, 1,000,000km, 12000 hours or whichever comes first in a well maintained engine cooling circuit at 50% v/v. Chemsol advises against indiscriminate mixing of different coolant formulations. Mixing different coolants may cause precipitation of inhibitor components and potentially result in overheating and reduced corrosion protection. COOLTECH provides maximum antifreeze / anitboil protection and provides peak reliability and operation life of the water pump because it is silicate free. It also provides premium cavitation and liner pitting protection maximising protection of all metals commonly found in the engine cooling system. It contains 1010g/L of Mono ethylene Glycol. COOLTECH is a superior general-purpose coolant based on Organic Additive Technology (OAT), which is a selectively balanced mixture of organic additives. ... It is a formulation based on monoethylene glycol and is free of nitrite, phosphate and amine inhibitors. COOLTECH is produced as a green liquid. Bittering agents are deliberately added, to reduce the risk of accidental poisoning by ingestion. COOLTECH provides long life protection against scale, rust and residue build up. It allows maximum fuel economy by performing at the desired engine operation temperature. USE. COOLTECH should be used in conjunction with the recommendation by the vehicle manufacturer. In the absence of such guidance, it should be diluted with good quality water to give solutions in the concentrati | Western Australia |
| Corrosoak | Corrosoak: CORROSION & SCALE REMOVER CONCENTRATE CorroSoak is designed for the safe removal of rust, scale and tarnish from most metal objects. It has numerous applications in the marine, construction, mining, food processing and automotive industries. Categories: Mining, Industrial, Mechanical, Agricultural, Marine, Cleaning, Descalers | Western Australia |
| CORROSOAK | Rust and Scale Remover. Description. CorroSoak is designed for the safe removal of rust, scale and tarnish from most metal objects. It has numerous applications in the automotive, marine, construction, mining, and food processing industries, as well as many areas around the home. CorroSoak is biodegradable, water-based and contains no solvents, phosphates, mineral acids or caustic ingredients. Approved by the Dept. of Primary Industry and Energy for use in export registered meat establishments. Use. CorroSoak can be used as a radiator flushing compound to remove rust and scale buildup from the cooling system. Drain old coolant from the cooling system (including heater) and refill with water. Add 500 mls CorroSoak to the radiator and run the engine for 15 to 20 minutes. Drain and thoroughly flush the system with water before filling with coolant such as Cool Max or Cool Plus coolants. To conserve product, any loose rust or scale deposits should first be removed using a wire brush. All traces of oil and grease should be cleaned off with detergent. CorroSoak is simply diluted in hot or cold water at the rate of 1 litre concentrate to 5 litres water, and the metal object immersed for between 3 - 24 hours. Hot water works much more quickly than cold water. The object is then removed, rinsed well and dried. The diluted CorroSoak may be re-used many times. Not suitable for zinc galvanized surfaces. Use with caution on magnesium alloys, or where solder is present. Safety. CorroSoak is not classified as hazardous. Read Material Safety Data Sheet before use. Avoid contact with skin and eyes and avoid breathing vapours. The wearing of rubber gloves is recommended when handling this product. Uses: Industrial Products. Product ID: 543. Categories: Industrial Products. | Western Australia |
| DECK & CABIN WASH | Multi Purpose Marine Cleaner with Disinfectant. This is a premium quality industrial grade product unequalled in cleaning and sanitising efficiency. It emulsifies grease and oils spontaneously, even in very hard water or seawater, and disinfects while it cleans - it kills germs instantly and inhibits growth of algae. Cabin Wash has been specially formulated for the rigorous cleaning and degreasing requirements of marine vessels, industrial workshops and processing areas. It is recommended for cleaning and sanitising concrete floors, carpets, food processing equipment, fishing boat decks, bilges, weathered aluminium truck bodies, engine degreasing, etc. USE. Deck & Cabin Wash is suitable for use with all types of mechanical cleaning equipment. Generally, for cleaning manually or via pressure washers, steam cleaners, soak tank ultrasonics, or automatic scrubbers, dilute 1:10 to 1:40 in water, as required. For normal cleaning, 1 part to 20 parts water is recommended. For heavy soiling areas, it may be applied undiluted. When used in food areas, rinse away all residues with potable water. Deck & Cabin Wash may adversely affect paint finishes if left on too long or applied in direct sunlight. SAFETY. This product is strongly alkaline and proper precautions should be taken with its use. The wearing of protective gloves, goggles, etc is recommended. Avoid inhalation of spray if protective masks are not worn. DG Class 8, UN 1719, PG III. . Uses: Marine Products. Product ID: 554. Categories: Marine Products. | Western Australia |
| DEMINERALISED WATER | This is water with a low conductivity due to the removal of minerals via the process of reverse osmosis. Uses: Cooling Systems. Product ID: 182. Categories: Cooling Systems. | Western Australia |
| Diesel AntiGel | Diesel AntiGel: COLD FLOW IMPROVER This advanced technology product lowers the gel point of diesel fuel and allows it to remain liquid at very low temperatures. It is suitable for use in summer or winter grade diesels. Categories: Industrial, Mechanical, Agricultural, Diesel Anti Gel Additives, Fuel Cleaning | Western Australia |
| DIESEL INJECTOR CLEANER | PowerUp Diesel Injector Cleaner consists of a high strength blend of solvents, surface active agents and sludge dispersants for engine top-end cleaning and decarbonising by addition to the fuel tank helps cleans injectors, valves & combustion chambers restores power loss from fouled injectors & allows smoother engine running. reduces exhaust smoke. improves engine efficiency & fuel economy. helps to remove water from fuel and fuel lines. reduces the formation of wax and gum deposits. allows fuel to burn cleanly and efficiently. helps neutralize harmful acids. Uses: Fuel & Oil Treatments. Product ID: 80. Categories: Fuel & Oil Treatments. | Western Australia |
| DIESEL PARTICULATE FILTER CLEANER (DPF) | DIESEL PARTICULATE FILTER CLEANER DESCRIPTION: Diesel particulate filters are deigned to remove 85-100% of the soot particles created by incomplete combustion of the fuel/air mix in diesel engines. These particles accumulate in the DPF filter and this filter will need to be cleaned and regenerated from time to time to prevent the vehicle going in to limp mode. By using PowerUps DPF Cleaner which is a combustion catalyst, it will induce passive regeneration of the filter by enhancing the combustion process, increasing the temperature of the exhaust gasses and lowering the soot burn out temperature. This improved regeneration process reduces the need to remove the filter for cleaning because of high soot content. Also by improving the combustion process PowerUps DPF Cleaner ensures a more complete burn there for reducing the amount of diesel particle matter that will end up in the particulate filter. USE. By adding 300ml of PowerUps DPF Cleaner to approximately 30L of diesel fuel it will help burn off any built up soot, reducing back pressure of the filter and help remove any warning lights. As ongoing maintenance DPF Cleaner should be added at 300ml to approximately 60L of diesel fuel to prevent any buildup of soot in the filter. . Other Benefits. *Increase power. Improves throttle response and engine performance. Improves low temperature starting. Increase lubrication of the fuel. Cleans injectors and fuel lines. Can be used in diesel and all recognised bio-Diesels. Uses: Fuel & Oil Treatments. Product ID: 480. Categories: Fuel & Oil Treatments. | Western Australia |
| DIESEL TEC AND PETROL TEC | Top End Cleaner. Combustion engines must meet increasingly stringent environmental requirements and yet are supposed to emit less and less harmful exhaust gases, such as for example nitrogen oxides (NOx). For this reason, car manufacturers are continuously devising new advanced solutions. One of the solutions is to reduce the emission of harmful gasses using Exhaust Gas Recirculation (EGR). With exhaust gas recirculation part of the exhaust gasses are captured and redirected to the combustion chambers in the engine. The dirty exhaust gasses are mixed in the engine with fresh intake air. As a result of mixing, the quantity of oxygen in the intake air decreases and the combustion chamber is filled with gas, which does not undergo a chemical reaction. As a result of this the heat generated during combustion has to be dissipated over a greater mass and consequently the combustion temperature drops. NOx occurs in particular at high combustion temperatures. Because the combustion temperature drops through the application of EGR, the quantity of NOx also drops. More soot as result of less nitrogen. Chemical reactions are continuously taking place due to the combustion process. If the quantity of nitrogen oxides decreases, this chemical reaction causes soot. For diesel engines the quantity of soot is higher than in the case of petrol engines. The soot adheres to the components such as the articulating EGR valve, which determines how much soot re-enters the engine, the intake manifold and the valve seats, pistons and piston rings on the intake valves. Eventually the EGR valve will seize up, and the closing action of the valves will deteriorate... | Western Australia |
| DTANE +8 | Cetane Booster. Your engine is only as good as the fuel you feed it. Cetane, which is also sometimes referred to as hexadecane or isocetane, is a colorless gas with the chemical formula C16H34. PowerUp Dtane +8 will improve the Cetane level in the diesel fuel up to 8 points depending on the quality of the fuel. How can a higher Cetane number be achieved?. There are two ways to gain a higher Cetane number. The first is to do it during the refining process. A low density fuel contains fewer BTUs and consequently provides less power to a diesel engine. Another way to gain a higher Cetane number . A higher Cetane number can also be derived through the addition of PowerUp Dtane +8 Cetane improver chemistry. When PowerUp Dtane +8 improver is added to a low Cetane diesel fuel, the result is a higher-Cetane-number fuel with more power and fuel efficiency. Dtane +8 is not only a Cetane improver but also a full fuel system maintenance additive that has many other benefits. Along with being able to absorb small amounts of water in the fuel system it will also increase the lubrication of the fuel up to 20%. Dtane Benefits. Quicker starting. Quieter operation with less diesel chatter. Improved fuel efficiency. A reduction of harmful emissions. Less wear and tear on the starter and batteries. Full system Cleaner. Improves lubrication and corrosion protection, reducing engine wear. Improves throttle response and engine performance. Improves low temperature starting. Safe with DPF filters. Suitable for common rail and direct injection diesel systems. Compatible with recognised biodiesels. Removes moisture from fuel. Use. Add 250- 300ml of PowerUp Dtane + 8 to 60 - 80L of diesel fuel. Add to fuel tank before filling with diesel to ensure proper mixing. Safety. Keep out of Reach of Children. Uses: Fuel & Oil Treatments. Product ID: 482. Categories: Fuel & Oil Treatments. | Western Australia |
| DynaFuel | DynaFuel: ALL FUEL TREATMENT REDUCES FUEL CONSUMPTION UP TO 10% Helps absorb and remove water from fuel and lines, neutralize acids, remove deposits and retard fungal growth. Suitable for petrol, diesel, small engines. Super concentrated and economical. Categories: Mining, Industrial, Mechanical, Agricultural, Marine, FUEL TREATMENTS & CLEANERS | Western Australia |
| ENGINE AND BILGE CLEANER | WATER-BASED DEGREASER. This super strength water-based degreaser rapidly cleans oil, grease and grime from bilges, engines, bulkheads, compressors, floors and decks. It will help reduce fumes and fire danger. It is non-toxic, non-caustic, non-flammable, biodegradable and solvent-free. USE. Bilges: Add 1 - 5 L Engine and Bilge Cleaner per 25 L bilge water, depending on condition. Leave for up to 12 hours and then flush twice. Engines, Bulkheads, Machinery: Brush on Engine and Bilge Cleaner undiluted, or mix 1 part to 3 parts with water, depending on the degree of soiling. Then wash clean. General Cleaning: may be used as supplied for heavy soiling, and should be applied by brush in such instances. Allow to penetrate for 1 minute and then hose off with strong jet of water. It may also be diluted and used through pressure washers, steam cleaners and automatic scrubbers. For lighter soiling it may be diluted by up to 1:100 in hot or cold water. SAFETY. Engine and Bilge Cleaner is not classified as hazardous. Avoid contact with skin and eyes. Keep out of reach of children. Read the Material Safety Data Sheet before use. Uses: Marine Products. Product ID: 555. Categories: Marine Products. | Western Australia |
| Engine Flush | Engine Flush: Removes harmful sludge from all petrol and diesel engines. Categories: Industrial, Mechanical, Agricultural, Marine | Western Australia |
| Engine Stopleak | Engine Stopleak: Reduces oil leakage and seepage. Categories: Industrial, Mechanical, Agricultural, Engine Stop leaks | Western Australia |
| ENGINE STOP LEAK | ENGINE STOP LEAK DESCRIPTION: ENGINE StopLeak is a concentrated synthetic blend of penetrants, swelling agents and viscosity enhancers designed to help restore the sealing efficiency of leaky seals and gaskets. USE. Add about 60 ml of ENGINE StopLeak per litre of crankcase oil. Safety. ENGINE StopLeak contains hydrocarbon solvents and is classified as hazardous. Irritating to eyes and skin. Keep out of reach of children. Avoid contact with skin and eyes. Avoid breathing vapour. Read Material Safety data Sheet before use. Uses: Fuel & Oil Treatments. Product ID: 486. Categories: Fuel & Oil Treatments. | Western Australia |
| Fluorseal | Fluorseal: ANTI-STAIN SEALER FOR MASONRY This unique water-based product provides a durable transparent protective barrier against oil and water on concrete and other porous masonry or mineral surfaces. Categories: Industrial, Cleaning, Agricultural, SEALER FOR MASONRY | Western Australia |
| Fresh Morning | Fresh Morning: PREMIUM DISHWASHING LIQUID Has cleaning applications in hospitals, institutions, homes, shops, restaurants, schools. etc. Ideal for cleaning food handling equipment, painted surfaces, vitreous & hard surfaces, glassware, cutlery, stainless steel etc. Categories: Cleaning, DISH WASHING LIQUIDS | Western Australia |
| FRESH MORNING | PREMIUM DISHWASHING LIQUID. DESCRIPTION. Fresh Morning is a concentrated blend of premium quality anionic and non-ionic surface-active agents, with glycerine emollient, designed for hand dishwashing and light duty cleaning duties. The activity of this premium liquid is such that it can be used at very low concentrations and still maintain a rich foam and effective cleaning properties. USE. Fresh Morning has numerous cleaning applications in hospitals, institutions, homes, shops, restaurants and schools. It is ideal for cleaning food handling equipment, painted surfaces, vitreous and other hard surfaces, glassware, cutlery and stainless steel trolleys. It is excellent for general maintenance cleaning of walls, floors, refrigerators and ceilings. It has many varied industrial applications, from washing vehicles to cleaning chrome and stainless steel. For hand dishwashing and general cleaning applications, it may be used at concentrations as low as 5 to 10 ml per 10 litres of hot water. For pot and pan washing, use 10 to 20ml per 10 litres of hot water. If required, Fresh Morning may be dispensed via a tap proportioner. SAFETY. Avoid contact with eyes. Spillages may be slippery. Uses: Cleaning & Maintenance. Product ID: 504. Categories: Cleaning & Maintenance. | Western Australia |
| FUEL POWER | "The best fuel treatment on the market". This product is for the removal of water, increasing the quality of fuel and is extremely concentrated for economical use. This product also neutralises acids, dissolves wax and gum, reduces emissions and increases lubricity of fuel by up to 22%. Uses: Fuel & Oil Treatments. Product ID: 187. Categories: Fuel & Oil Treatments. | Western Australia |
| GASAD | GASAD: A valve and valve seat lubricant which is vital for engines running on LP Gas to ensure the valves and valve seats are provided with extra lubrication to reduce wear. Categories: Mining, Industrial, Mechanical, Agricultural, Valve Saver Fluids, LUBRICATING SYSTEM & LUBRICANTS | Western Australia |
| Gear Oil Fortifier | Gear Oil Fortifier: This blend of synthetic additives is designed to enhance the performance of lubricants, particularly in old or worn engines and industrial gear boxes. Categories: Mining, Industrial, Mechanical, Agricultural, Marine, Lubricates & Oils | Western Australia |
| GP Degreaser | GP Degreaser: Super strength water-based degreaser. Rapidly cleans oil, grease and grime from bilges, engines, bulkheads, compressors, floors and decks. Helps reduce fumes and fire danger. Is non-toxic, non-caustic, non-flammable, biodegradable and solvent-free. Categories: Mining, Industrial, Cleaning, Agricultural, Marine, General Purpose Degreasers, Water Based Degreasers | Western Australia |
| Graffiti Remover | Graffiti Remover: This blend of solvents, natural oils and biodegradable surfactants is designed to remove pen, ink and some paints, crayons, etc, from vinyl, plastic, glass, laminex, metal and non-porous masonry and timber surfaces. Is an effective degreaser & pre-soak. Categories: Industrial Cleaning, Graffiti Removers & Cleaners | Western Australia |
| GREASE LIFTER | Solvent Based Degreaser. Description. This is a powerful blend of solvents and emulsifying surfactants designed for cleaning, dispersing and degreasing operations by soak, spray or brush application. It has the following features: Low flammability (high flash point). Safe on all metals. Will not damage paintwork when used as directed. Rinses off easily in cold water (even seawater). Rapidly dissolves most oils, greases, lubricants etc. Low evaporation rate. Low electrical conductivity. Contains no chlorinated solvents. Grease Lifter is ideal for general clean-up operations on engines, heavy machinery, compressors and workshop equipment, floors and driveways. It is suitable for cleaning bilges and tanks, and for treating oil spills on decks and piers. Grease Lifter is recommended as a pre-cleaning detergent prior to alkaline cleansing or decarbonising operations. It can also be used for dewaxing vehicles and spot cleaning and degreasing of painted surfaces, providing there is an immediate cold water rinse afterward. Use. For heavy soiling, apply by brush allowing Grease Lifter to penetrate for 1-2 minutes, then hose off with a strong jet of water. Safety. Grease Lifter contains hydrocarbon solvents. Read Material Safety Data Sheet before use. Prolonged exposure to the skin may remove natural fats and cause irritation. Avoid contact with eyes, and inhalation of spray mist. Uses: Industrial Products. Product ID: 544. Categories: Industrial Products. | Western Australia |
| Green Clean Hand Cleaner | Green Clean Hand Cleaner: Derived from a special blend of natural oil derivatives, emulsifiers and emollients, with abrasive for heavy soiling or without abrasive for light soiling of hands. Suitable for use in mines, workshops and general purpose industrial uses. Categories: Mining, Industrial, Mechanical, Cleaning, Agricultural, Marine, Hand Cleaners | Western Australia |
| HD Degreaser Sanitiser | HEAVY DUTY DEGREASER SANITIZER Industrial strength - emulsifies grease & oils spontaneously, even in very hard water or seawater, and disinfects while it cleans. Is recommended for cleaning in an extensive range of applications. Categories: Mining, Industrial, Mechanical, Cleaning, Agricultural, Marine, HEAVY DUTY DEGREASERS | Western Australia |
| HT Chain Lube | HT Chain Lube: HIGH TEMPERATURE CHAIN LUBRICANT Lubricates and penetrates chain links, pins and rollers, resists fling off during high temperature industrial operations; reduces chain wear and stretch. Categories: Mining, Industrial, Mechanical, Agricultural, CHAIN LUBRICANTS | Western Australia |
| INHIBITED PROPYLENE GLYCOL (IPG) | IPG is a hybrid organic acid / propylene glycol - based antifreeze concentrate for use in those cooling systems where the use of ethylene glycol is not desirable (eg food processing, etc.). IPG is an amine, nitrite, phosphate and silicate - free formulation which contains inhibitors to reduce the corrosion of steel, cast iron, aluminium alloy, brass, copper and solder. IPG should be blended with clean good quality water to suit the cooling system requirements, as outlined in the table below: IPG is not classified as hazardous and is biodegradable. IPG should be blended with clean good quality water to suit the cooling system requirements, as outlined in the table below: IPG concentration in the system may be monitored by measuring the refractive index of the coolant, and topped up as required. Suitable biocides may be added to preserve the coolant if needed. To avoid possible incompatibility problems, do not mix with other coolant formulations. Uses: Cooling Systems. Product ID: 192. Categories: Cooling Systems. | Western Australia |
| Injector Cleaner | Injector Cleaner: Suitable for both diesel or petrol systems. Cleans and maintains injectors, carburettor components and frees sticky parts, jets & fuel lines. Categories: Industrial, Mechanical, Agricultural, Marine, Fuel Injector Cleaners | Western Australia |
| LANOLUBE | LANOLUBE DESCRIPTION: Lanolube is a premium multifunctional lubricant and water proofing product that prevents corrosion and is non conductive. USE. Simply spray on to a clean dry surface and wait for solvent to evaporate before use. Can be used as a weld ant splatter, general lubrication all metal surfaces including wire rope, corrosion protection, coating for wood surfaces and canvas, thread anti-seize and battery terminal protection. SAFETY. Not classified as hazardous. Avoid inhalation of spray mist during use. Read Safety Data Sheet before use. Uses: Cleaning & Maintenance. Product ID: 502. Categories: Cleaning & Maintenance. | Western Australia |
| LAUNDRY LIQUID | LAUNDRY LIQUID & MULTIPURPOSE DETERGENT. DESCRIPTION. This is a premium quality product, specially formulated to be environmentally friendly whilst retaining optimum cleaning efficiency. Biodegradable. Contains no phosphates. Contains no synthetic dyes, fragrances or thickeners. Contains no caustic ingredients. Compatible with hard water. Free flowing for easier pouring. Suitable for hot or cold washing. Has many other uses (see below). USE. Laundry Washing . Light-Med Soiling Heavy Soiling. Large toploading automatics 50 ml 100 ml. Medium toploading automatics 40 ml 80 ml. Twin Tubs etc. 25 ml 50 ml. A little may be applied undiluted to stains immediately prior to the wash, or it may used for presoaking at up to 50-80 ml per 10 litres water. Suitable for all fabrics except wool or silk. Floor Mopping. Add 20-40 ml per 10 litre bucket of cold or warm water. Apply by mop or sponge. Suitable for all vinyl and tiled floors. Glass and Window Cleaning. Mix 5ml with 200ml methylated spirits and 300ml water. Spray on mirrors, windows or other glass surfaces; wipe off with lint-free cloth or paper towelling. Spray and Wipe Cleaning. Mix 25ml with 200ml methylated spirits and 300ml water. For effective cleaning and degreasing of kitchen and other hard surface areas, spray on and wipe off. Car Washing. Add 25-50ml per 10 litre bucket of cold water. Apply by chamois or soft sponge and hose off thoroughly. Avoid washing car in direct sunlight. Degreasing. Dilute 50:50 in kerosene and stir or shake well just prior to use. Suitable for cleaning and degreasing car engines, lawn mowers, machinery etc. Apply by (e.g.) paintbrush, allow several minutes to penetrate and hose clean. Safety. Keep out of reach from children. Uses: Cleaning & Maintenance. Product ID: 503. Categories: Cleaning & Maintenance. | Western Australia |
| Laundry Liquid & Multi-Purpose Detergent | Laundry Liquid & Multi-Purpose Detergent: Specially formulated to be environmentally friendly while retaining optimum cleaning efficiency even in hard water. Is biodegradable and contains no phosphates, caustics, synthetic dyes, fragrances. Suitable for hot or cold water washing. Categories: Industrial, Mechanical, Cleaning, Agricultural, Marine, Laundry Liquids & Multi-Purpose Detergents | Western Australia |
| Leather Cleaner & Conditioner | Leather Cleaner & Conditioner: Spray -on, buff-off water-based polish to enhance and protect leather and vinyl. Categories: Industrial, Mechanical, Cleaning, Agricultural, Marine | Western Australia |
| Liquid Sugar Soap | Liquid Sugar Soap: GREASE & GRIME CLEANER Concentrated and economical detergent for use as: - pre-soak - removing grease, grime, smoke-stains, etc from most surfaces - in the laundry, bathroom walls - outdoor driveways, bbqs etc. Categories: Mining, Industrial, Cleaning, Agricultural, Marine, Cleaners Sugar Soaps | Western Australia |
| MIRACLE LUBE | ANTI-CORROSION LUBRICANT: Available in liquid or aerosol form. DESCRIPTION. This unique multipurpose product is designed to displace moisture, penetrate rusted parts, lubricate, stop squeaks, clean surfaces, and protect them from corrosion. It has numerous uses in automotive and marine maintenance, transport, engineering, industrial and commercial equipment. Miracle Lube is pH neutral, electrically non-conductive, non-corrosive, non-toxic, non-staining and non-flammable. It does not dry out, become sticky, or wash off with water, and contains no silicones, kerosene or acid forming ingredients. USE. Miracle Lube will not harm metals (including stainless steel, aluminium, copper, brass and ferrous alloys), plastic, enamel, laminex, fibreglass, painted surfaces, neoprene seals, electrical insulators, vinyl, etc. For normal use, just spray or brush Miracle Lube onto area to be treated. Items such as rusted nuts and bolts may be soaked for as long as is required. Miracle Lube also works effectively as a chain lubricant and a cutting oil for lathe work, milling, grinding, or honing of all metals. It maintains machine-finished surfaces moisture and corrosion free for long periods. SAFETY. Miracle Lube is not classified as hazardous. Read Material Safety Data Sheet before use. Avoid inhalation of spray mist during use. Pack Sizes: 1 litre and 5 litres. Product ID: 847. | Western Australia |
| OCTANE BOOSTER +30 | This concentrated octane enhancer will increase octane number by up to 30 RON points at 1: 200, for general use. It is fortified with fuel system cleaners and top end lubricants and may be diluted to give an effective retail strength octane booster that is suitable for use in leaded, unleaded and high octane petrol. Uses: Fuel & Oil Treatments. Product ID: 201. Categories: Fuel & Oil Treatments. | Western Australia |
| Octane Boosters+10 and +30 | Octane Boosters+10 and +30: Suitable for leaded, unleadead & high octane petrol. A concentrated octane enhancer that will increase octane number by up to 30 RON points at 1:200, for general use. Is fortified with fuel system cleaners and top-end lubricants. Categories: Mining, Industrial, Mechanical, Agricultural, Octane Boosters & Additives | Western Australia |
| Oil Fortifier | Oil Fortifier: This blend of synthetic additives enhances the performance of API, SAE and CCMC engine oils and lubricants, particularly in old or worn engines. Categories: Mining, Industrial, Mechanical, Agricultural, Marine, Oil Fortifiers & Additives | Western Australia |
Would you like to list your products on Australian Chemical Suppliers?
Our database is helping our users find suppliers everyday.