Find where to buy products from Australian suppliers, including: distributors, industrial manufacturers, bulk supplies and wholesalers of raw ingredients & finished goods.
Search for products or services, then visit the suppliers website for prices, SDS or more information. You can also view suppliers in NZ, UK or the USA.
| Product | Description | |
|---|---|---|
| A-C® 400 | A-C® 400 is an ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 13%, used extensively in hot melt adhesives (HMAs) to control rheology and boost adhesion. It can be added as a diluent but provides the dual function of reducing application viscosity at melt, while providing an adhesion boost versus homopolymer, non functional diluents (FT, byproduct, thermally degraded (TD) and PE homopolymer waxes). It is completely miscible in EVA adhesive resins, as would be expected by the similar chemistry. It is also used in candles to provide paraffin crystal nucleation, which increases thermal and breakage resistance, adhesion to glass, and fragrance retention. Group: Specialty chemicals, polymers. CAS No. 24937-78-8. Composition: EVA WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007916. |  Australia |
| A-C® 400A | A-C® 400A is a Ethylene vinyl acetate (EVA) copolymer in powder form, with a VA content of 13%, used extensively in hot melt adhesives (HMAs) to control rheology and boost adhesion. A-C® 400A displays a good benefits in providing the dual function of reducing application viscosity at melt, while providing an adhesion boost versus homopolymer, non functional diluents. A-C® 400A is suitable to use in color masterbatch as dispersing agent, process aid for EVA-based wire and cable compounds. Group: Specialty chemicals, polymers. CAS No. 24937-78-8. Composition: Ethylene Vinyl Acetate. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: Waxes, Dispersing Agents, POLYMERS, EVA. Physical Form: Nano powder. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007908. | Australia |
| A-C® 540 | A-C® 540 is an ethylene acrylic acid (EAA) copolymer in a prill form, with an acrylic acid (AA) content of 5%, for use in adhesives to promote adhesion to various substrates. It is also used in aqueous floor polishes to provide drag (raising the coefficient of friction) thereby controlling the final coefficient of friction. Its acid number of 40 aids emulsification. Also used in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. Group: Specialty chemicals, polymers. Composition: EVA WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007917. | Australia |
| A-C 540A | A-C 540A is an ethylene acrylic acid (EAA) copolymer in a powdered form, with an acrylic acid (AA) content of 5%, for use in adhesives to promote adhesion to various substrates. It is also used in aqueous floor polishes to provide drag (raising the coefficient of friction) thereby controlling the final coefficient of friction. Its acid number of 40 aids emulsification. Also used in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. Is a dispersing agent for color masterbatch in engineering resins. Excellent external lubricant for polyamide compounds. Group: Specialty chemicals, polymers. CAS No. 9010-77-9. Composition: PP-PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 2.0%. Certification: REACH. Product Code: PIM000007912. | Australia |
| AC-580 | A-C 580 ethylene acrylic acid (EAA) copolymer in a prill form, with an acrylic acid (AA) content of 10%, for use in adhesives to promote adhesion to various substrates. It is also used in aqueous floor polishes to provide drag (raising the coefficient of friction) thereby controlling the final coefficient of friction. Its acid number of 75 aids emulsification. Also used in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. Group: Specialty chemicals, polymers. CAS No. 9002-88-4. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.1~2%. Certification: REACH. Product Code: PIM000007931. | Australia |
| Acri-Seal Water Based Acrylic Sealer | ACRI-SEAL is a non-toxic; water based acrylic sealer that is ideal for use as a concrete sealer, terrazzo sealer, clay brick sealer, reconstituted limestone sealer, natural limestone sealer, walkway sealer or general purpose topcoat (excluding marine). This sealer is non-hazardous, low odour and delivers excellent adhesion and high durability that keeps concrete and masonry better for longer. This product can deliver excellent levels of gloss which can be varied by the number of coats or dilution with water. Application directions: Use with confidence on: Warehouses. Garages. Tilt up industrial buildings. Domestic concrete floor areas. Pack Sizes: 5 Litre, 10 Litre, 20 Litres. Product ID: WC773. Chemicals By Industry, Building & Construction. |  Australia Wide |
| Aluminium Oxide - White Sapphire Alusion | White Sapphire Alusion (Aluminium Oxide): Elevate your skincare and sun care formulations with Antaria's premium aluminium oxide, the ultimate multifunctional ingredient. Alumina offers anti-sweat and mattifying properties, boosts SPF effectiveness when combined with our Zinc Oxide, and provides a soft-focus, radiant finish. Ideal for sunscreens, moisturizers, and makeup, it delivers long-lasting wear and improved powder adhesion. CAS No. 1344-28-1. Chemical Formula: Al2O3. |  |
| ARCHSOL® 8061 | ARCHSOL® 8061 is an anionic pure acrylic emulsion designed for exterior wall paint. It exhibits outstanding dirt pick-up resistance, excellent early water resistance and good colorant compatibility. Key Benefits: - Good gloss stability. - Excellent durability. - Good early water resistance. - Good adhesion after immersed in water. Group: Specialty chemicals, paints & coatings. Composition: Anionic pure acrylic. Application: Architectural and Deco. Function: Acrylic Emulsions. Physical Form: Emulsion. Product Code: PIM000023244. | Australia |
| ASFIER 123 | ASFIER 123 is a liquid polyamine-type asphalt emulsifier developed specifically to make Cationic Rapid Setting emulsion. The asphalt emulsion prepared with ASFIER 123 shows good stability at storage, in contact with mineral aggregate has short breaking time, excellent coating and good adhesion properties. Group: Specialty chemicals, paints & coatings. CAS No. 61791-55-7. Composition: Polyamine. Application: Construction. Function: ADDITIVES, Adhesion Promoters. Physical Form: Liquid. Certification: AICS. Product Code: PIM000010188. | Australia |
| BENZOFLEX 2088 PLASTICIZER | BENZOFLEX 2088 PLASTICIZER is a high solvating plasticiser known for its exceptional performance in PVC, polyvinyl acetate and water-based adhesive systems. It has the application in Flooring, Adhesives/sealants B&C & Vinyl plastisols. It displays excellent wet track, set time and open times and also improve adhesion in acrylic latex caulks. In PVC it serves as a fast fueser, delivering low processing tempertaures and low volatility. Group: Specialty chemicals, paints & coatings. Composition: Benzoate Esters. Application: Adhesives & Sealants, Construction. Function: SOLVENTS, Base Oils & Plasticizers. Physical Form: Liquid. Product Code: PIM000039764. | Australia |
| BENZOFLEX 9-88 SG PLASTICIZER | BENZOFLEX 9-88 SG PLASTICIZER is a non-phthalate plasticizer specifically designed for 2K polyurethane systems where it is very compatible and efficient. Group: Specialty chemicals, paints & coatings. Composition: Dipropyleneglycol dibenzoate, Benzoate Esters. Application: Adhesives & Sealants. Function: ADDITIVES, Adhesion Promoters, Other. Physical Form: Liquid. Product Code: PIM000039776. | Australia |
| BUTVAR® B-72 | BUTVAR® B-72 is a thermoplastic, polyvinyl butyral resin which offers a unique combination of properties for coating or adhesive applications. The use or addition of polyvinyl butyral to a system imparts adhesion, toughness, and flexibility. PVB retains the clarity of the coating and offers reactive hydroxyl sites for crosslinking with thermoset systems. Group: Specialty chemicals, paints & coatings. Composition: No Hazardous Ingredients. Application: Powder Coating, Adhesives & Sealants. Function: ADDITIVES, Adhesion Promoters. Physical Form: Nano powder. Product Code: PIM000039777. | Australia |
| CR 40000 N | CR 40000 N is a non-ionic high-molecular polymer. The white or off-white powder is freely soluble in cool water but not soluble in hot water. Its outstanding properties like water retention, thickening, rheological and adhesion make it the first choice to enhance quality of construction materials and decorative materials. This product is applicable to mortars that use cement, gypsum and lime and so on as gelling agent. Group: Specialty chemicals, paints & coatings. CAS No. 9032-42-2. Composition: Methyl Hydroxy Ethyl Cellulose. Application: Architectural and Deco., Construction. Function: ADDITIVES, Rheology Modifier. Physical Form: Micronized Powder. Recommended Dosage: 0.3%. Product Code: PIM000007238. | Australia |
| CR40000NGL | CR40000NGL is a non-ionic high-molecular polymer. The white or off-white powder is freely soluble in cool water but not soluble in hot water. Its outstanding properties like water retention, thickening, rheological and adhesion make it the first choice to enhance quality of construction materials and decorative materials. This product is applicable to mortars that use cement, gypsum and lime and so on as gelling agent. Group: Specialty chemicals, paints & coatings. CAS No. 9032-42-2. Composition: Methyl Hydroxy Ethyl Cellulose. Application: Architectural and Deco., Construction. Function: ADDITIVESRheology Modifiers. Physical Form: Micronized Powder. Recommended Dosage: 0.3%. Product Code: PIM000007237. | Australia |
| CR 8020 AM | CR 8020 AM is a non-ionic and water-soluble cellulose ether which is white or off-white powder and in nature a modified methyl hydroxyethyl cellulose (MHEC) with high viscosity. Its outstanding properties like water retention, constructability, thickening and adhesion make it the first choice for construction materials production such as mortars, putty and ceramic tile adhesive. Group: Specialty chemicals, paints & coatings. CAS No. 9032-42-2. Composition: Methyl Hydroxy Ethyl Cellulose. Application: Architectural and Deco., Construction. Function: ADDITIVES, Rheology Modifier. Physical Form: Micronized Powder. Recommended Dosage: 0.3%. Product Code: PIM000007236. | Australia |
| DAPRO® FX 514 | DAPRO® FX 514 is an advanced plasticizer made from renewable resources, offering a VOC-free and low-odor solution for aqueous adhesive systems. This cutting-edge plasticizer is specifically designed to optimize film formation, plasticization, and long-term flexibility in low or zero-VOC water-based adhesives. With enhanced tackiness, superior flexibility, and outstanding plasticizing properties, DAPRO® FX 514 provides exceptional performance and reliability in various applications, including flexible and wood floorings, all while being environmentally friendly and odorless. Upgrade your adhesive formulations with DAPRO® FX 514 to experience improved performance and sustainability. Group: Specialty chemicals, paints & coatings. CAS No. 27194-74-7. Application: Adhesives & Sealants, Can, Coil and Industrial. Function: ADDITIVES, Adhesion Promoters, ADDITIVES, Coalescents. Physical Form: Liquid. Claim: VOC Free. Product Code: PIM000002139. | Australia |
| DIAMIN TO(L) | DIAMIN TO(L) is a liquid antistripping agent for hot mix asphalt pavements based on special polyamine. This product can be incorporated directly into the asphalt obtaining high affinity with Calcium and Silicate aggregates. Group: Specialty chemicals, paints & coatings. CAS No. 7173-62-8. Composition: Amine. Application: Construction. Function: ADDITIVES, Adhesion Promoters. Physical Form: Liquid. Certification: AICS. Product Code: PIM000010186. | Australia |
| DOWSIL 109F ADDITIVE | DOWSIL 109F ADDITIVE is a highly efficient antifoaming agent. DOWSIL 109F ADDITIVE is a very effective defoamer and no impact to interfacial adhesion. DOWSIL 109F ADDITIVE is commonly used in architecture coatings applications. Group: Specialty chemicals, paints & coatings. Composition: Mixture. Application: Can, Coil and Industrial, Can, Coil and Industrial, Lamination and Converting, Automotive Paints, Printing Inks. Function: ADDITIVES, Other. Physical Form: Liquid. Product Code: PIM000043034. | Australia |
| DOWSIL Z-6121 SILANE | DOWSIL. Z-6121 SILANE is a silane adhesion promoter made from 62% active and 34% solids in alcohol. DOWSIL. Z-6121 SILANE display the benefits of eliminating the oven cure normally required to develop optimum properties, improves adhesion and salt-spray resistance of epoxy coatings and to improves adhesion of Alkyd finishes to glass. DOWSIL. Z-6121 SILANE is suitable to use in epoxy coating, silicone resin based coatings and alkyd coatings. Group: Specialty chemicals, paints & coatings. Composition: Amino-methoxysilane. Application: Printing Inks, Can, Coil and Industrial, Architectural and Deco., Automotive Paints. Function: Adhesion Promoters. Physical Form: Liquid. Recommended Dosage: 1-4%. Product Code: PIM000004150. | Australia |
| EASTMAN AERAFIN 17 POLYMER | EASTMAN AERAFIN 17 POLYMER is a propylene-based Amorphous Poly Alpha Olefin (APAO) that is compatible with a range of hydrocarbon tackifying resins. Group: Specialty chemicals, polymers. Composition: Copolymer. Application: Fibers, Textiles & Films, Polymer Producers, Thermosets & Composites. Function: Adhesion Promoters. Physical Form: Solid. Recommended Dosage: 5-10%. Product Code: PIM000039767. | Australia |
| EASTMAN AERAFIN 180 POLYMER | EASTMAN AERAFIN 180 POLYMER is a propylene-based Amorphous Poly Alpha Olefin (APAO) that is compatible with a range of hydrocarbon tackifying resins. Group: Specialty chemicals, polymers. Composition: Copolymer. Application: Fibers, Textiles & Films, Polymer Producers, Thermosets & Composites. Function: Adhesion Promoters. Physical Form: Solid. Recommended Dosage: 5-10%. Product Code: PIM000039768. | Australia |
| EASTMAN CELLULOSE ACETATE BUTYRATE (CAB-531-1) | EASTMAN CELLULOSE ACETATE BUTYRATE (CAB-531-1) is a cellulose ester with a higher butyryl level than Eastman CAB-381 type esters. Tough films with good resistance to marring and weathering are possible through combinations of cellulose acetate butyrate with thermoplastic acrylic resins. Eastman CAB-531-1 and CAB-381 esters are similar in hydroxyl content and solubility characteristics, both being soluble in a wide range of solvents. Eastman CAB-531-1 is a more flexible resin that requires lower plasticizer modification than the Eastman CAB-381 esters. When CAB-531-1 is dissolved in appropriate solvents, a clear, colorless solution is produced. Eastman CAB-531-1 is based on cellulose, one of the most abundant natural renewable resources. The calculated approximate bio-content value of 38% for Eastman CAB-531-1 was determined by using six bio-based carbon atoms per anhyroglucose unit divided by the total number of carbons per anhyroglucose unit. Although the value reported is not specifically measured for bio-carbon, it can be estimated based on typical partition data. Group: Specialty chemicals, paints & coatings. Composition: No Hazardous Ingredients. Application: Can, Coil and Industrial, Can, Coil and Industrial, Powder Coating, Adhesives & Sealants, Printing Inks. Function: ADDITIVES, Adhesion Promoters, Other, BINDERS, Acrylic Resins. Physical Form: Nano powder. Product Code: PIM000039781. | Australia |
| EASTMAN CELLULOSE ACETATE BUTYRATE (CAB-551-0.01) | EASTMAN CELLULOSE ACETATE BUTYRATE (CAB-551-0.01) has many unique attributes that will serve useful across many different coating application areas. It has the lowest Tg (glass transition temperature) of the CAB portfolio. It also has the second lowest M(n), which helps its compatibility with other coatings components. It is compatible with numerous cross-linking resins and has a lower solution viscosity. In coatings, Eastman CAB-551-0.01 gives clear films, reduces surface tack and mottling, minimizes cratering, improves flow and thermal reflow, and provides inter coat adhesion and good UV stability. Its good compatibility with a wide range of curing resin systems and its solubility in a wide variety of solvents and solvent combinations make it useful as an additive in numerous coating compositions. When dissolved in appropriate solvents selected for CAB-551-0.01, a clear, colorless solution is produced. It is useful in lacquers for glass, plastic, wire and release coatings and is available in pellet form. Group: Specialty chemicals, polymers. Composition: Cellulose acetate butyrate. Application: Can, Coil and Industrial, Can, Coil and Industrial, Powder Coating, Adhesives & Sealants, Printing Inks. Function: SOLVENTS, Cosolvent. Physical Form: Nano powder. Product Code: PIM000039782. | Australia |
| EASTMAN CELLULOSE ACETATE BUTYRATE (CAB-551-0.2) | EASTMAN CELLULOSE ACETATE BUTYRATE (CAB-551-0.2) is a cellulose ester with high butyryl content and relatively low molecular weight. It is compatible with numerous cross-linking resins and has a lower solution viscosity. In coatings, Eastman CAB-551-0.2 gives clear films, reduces surface tack and mottling, minimizes cratering, improves flow and thermal reflow, and provides inter coat adhesion and good UV stability. It is useful for durable cross-linked formulations. Its good compatibility with a wide range of curing resin systems and its solubility in a wide variety of solvents and solvent combinations make it useful as an additive in numerous coating compositions. When CAB-551-0.2 is dissolved in appropriate solvents a clear, colorless solution is produced. Group: Specialty chemicals, polymers. Composition: Cellulose acetate butyrate. Application: Can, Coil and Industrial, Can, Coil and Industrial, Powder Coating, Adhesives & Sealants, Printing Inks. Function: SOLVENTS, Cosolvent. Physical Form: Nano powder. Product Code: PIM000039783. | Australia |
| EASTMAN CELLULOSE ACETATE PROPIONATE (CAP-504-0.2) | EASTMAN CELLULOSE ACETATE PROPIONATE (CAP-504-0.2) is a free-flowing powder having low odor, low color, and high hydroxyl content. It is fast dissolving, has good water tolerance and resistance to souring, and is compatible with many ink resins and solvents. It has good resistance to discoloration from UV light and has good adhesion to plastics. It has a low viscosity (0.2 seconds) and has an approximate propionyl content of 42.5 wt%. When CAP-504-0.2 is dissolved in appropriate solvents, a clear, colorless solution is produced. Eastman CAP-504-0.2 is based on cellulose, one of the most abundant natural renewable resources. The calculated approximate bio-content value of 49% for Eastman CAP-504-0.2 was determined by using six bio-based carbon atoms per anhyroglucose unit divided. Group: Specialty chemicals, polymers. Composition: Cellulose acetate propionate. Application: Can, Coil and Industrial, Can, Coil and Industrial, Powder Coating, Adhesives & Sealants, Printing Inks. Function: SOLVENTS, Cosolvent. Physical Form: Nano powder. Product Code: PIM000039784. | Australia |
| EASTMAN CHLORINATED POLYOLEFIN 343-1 (100% SOLIDS) | EASTMAN CHLORINATED POLYOLEFIN 343-1 (100% SOLIDS) is supplied as a white powder and is soluble in both toluene and xylene. It is 18-23 wt. % chlorine. CP 343-1 has good resistance to high temperatures. Because of its limited solubility, solutions of CP 343-1 may become hazy, partially precipitate from solution or gel with exposure to low temperatures. Should any of the above conditions occur, warming the contents to approximately 38° 49° C, with mild agitation will generally return the product to its original condition. Care should be taken in handling or mixing nonpolar solvents such as xylene and toluene. Group: Specialty chemicals, paints & coatings. Composition: Chlorinated Polyolefin. Application: Adhesives & Sealants, Automotive Paints, Can, Coil and Industrial, Powder Coating. Function: Adhesion Promoters. Physical Form: Solid. Product Code: PIM000039785. | Australia |
| EASTMAN CHLORINATED POLYOLEFIN 343-3 (50% SOLIDS IN XYLENE) | EASTMAN CHLORINATED POLYOLEFIN 343-3 (50% SOLIDS IN XYLENE) is a 50% solution of a chlorinated polyolefin in xylene. It is 26-32 wt. % chlorine and has a Gardner color value of 11. Chlorinated Polyolefin 343-3 has a good solvent tolerance for a wide range of solvents. Group: Specialty chemicals, paints & coatings. Composition: Xylene, Modified Chlorinated Polyolefin, Ethylbenzene, Chlorobenzene, Epoxidized oil. Application: Powder Coating, Automotive Paints. Function: ADDITIVES, Adhesion Promoters. Physical Form: Liquid. Product Code: PIM000039786. | Australia |
| EASTMAN CP 343-1 50% IN XYLENE | EASTMAN CP 343-1 50% IN XYLENE has good resistance to high temperatures. It can withstand 110° C for 20 minutes and a thermogravimetric analysis suggests it will withstand appreciable higher temperatures. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 1330-20-7, 100-41-4, 108-90-7. Composition: Xylene, Eethylbenzene, Chlorobenzene. Application: Thermosets & Composites, Lamination and Converting, Can, Coil and Industrial, Can, Coil and Industrial, Rubber & Elastomers. Function: ADDITIVES, Adhesion Promoters. Physical Form: Liquid. Product Code: PIM000037715. | Australia |
| EASTMAN CP 730-1 100% SOLID | EASTMAN CP 730-1 100% SOLID is designed to be the active component in adhesion promoter primers used to ensure adhesion of color coats and topcoats to polypropylene (PP) and thermoplastic olefin (TPO) plastics. EASTMAN CP 730-1 100% SOLID offers the great benefits to deliver excellent adhesion to TPO and PP plastics, excellent humidity resistance & outstanding gasoline and gasohol resistance. Group: Specialty chemicals, paints & coatings. Composition: Chlorinated Polyolefin. Application: Powder Coating, Lamination and Converting, Architectural and Deco., Automotive Paints. Function: ADDITIVES, Adhesion Promoters. Physical Form: Solid. Product Code: PIM000037716. | Australia |
| EASTMAN CPO 343-1 25% | EASTMAN CPO 343-1 25% has good resistance to high temperatures. It can withstand 110° C for 20 minutes. A thermogravimetric analysis suggests it will withstand appreciable higher temperatures. EASTMAN CPO 343-1 25% can be used in architectural coatings, auto OEM, auto plastics, auto refinish, automotive, commercial printing inks, general industrial coatings, graphic arts, protective coatings & truck/bus/RV. Group: Specialty chemicals, paints & coatings. Composition: Chlorinated Polyolefin. Application: Powder Coating, Lamination and Converting, Architectural and Deco., Automotive Paints. Function: ADDITIVES, Adhesion Promoters. Physical Form: Liquid. Product Code: PIM000037717. | Australia |
| EASTMAN CPO 343-3 25% | EASTMAN CPO 343-3 25% is 26-32 wt. % chlorine and has a Gardner color value of 6 - 7. Chlorinated Polyolefin 343-3 has a good solvent tolerance for a wide range of solvents. EASTMAN CPO 343-3 25% can be used in auto OEM, auto refinish, automotive, automotive parts & accessories, general industrial coatings, graphic arts, non-medical housings & hardware for Elec, Protective coatings & Truck/bus/RV. Group: Specialty chemicals, paints & coatings. Composition: Chlorinated Polyolefin. Application: Powder Coating, Lamination and Converting, Architectural and Deco., Automotive Paints. Function: ADDITIVES, Adhesion Promoters. Physical Form: Liquid. Product Code: PIM000037718. | Australia |
| EASTMAN NPG GLYCOL PLATELETS | EASTMAN NPG GLYCOL PLATELETS is the industry standard glycol component in high-quality polyester resins for industrial coatings and fiberglass-reinforced plastics applications. Most polyester resin formulations contain NPG as the sole glycol component, or it is used in conjunction with a modifying glycol to achieve desired properties. Eastman NPG is also used in polyester polyols for polyurethane coatings for the automotive, industrial maintenance, transportation, and aerospace markets. Group: Specialty chemicals, electronic & specialties, paints & coatings. Composition: 2, 2-dimethyl-1, 3-propanediol. Application: Lubricants. Function: ADDITIVES, Adhesion Promoters, Other. Physical Form: Solid. Product Code: PIM000039788. | Australia |
| EASTMAN OPTIFILM ADDITIVE OT1200 | EASTMAN OPTIFILM ADDITIVE OT1200 uniquely improves the application properties of your paint through improved workability and longer open time over a range of application conditions. It. is a low VOC additive and does not negatively affect other key paint properties such as water resistance, wet adhesion, block resistance and stability. Group: Specialty chemicals, paints & coatings. CAS No. 105-08-8. Composition: 1,4-Cyclohexanedimethanol. Application: Architectural and Deco. Function: ADDITIVESOther. Physical Form: Liquid. Product Code: PIM000062408. | Australia |
| EASTOTAC C-100R RESIN | EASTOTAC C-100R RESIN is a tackifier resin with a ring and ball softening point of 100°C and a molten Gardner color of 4. Group: Specialty chemicals, polymers. Composition: Hydrocarbon resin, White mineral oil. Application: Thermosets & Composites, Fibers, Textiles & Films. Function: Adhesion Promoters. Physical Form: Solid. Recommended Dosage: 30-50%. Product Code: PIM000039772. | Australia |
| EASTOTAC C-100W RESIN | EASTOTAC C-100W RESIN is a tackifier resin with a ring and ball softening point of 100°C and a molten Gardner color of <1. In applications where low color is required, the W-grade resins are suggested. Group: Specialty chemicals, polymers. Composition: Hydrocarbon resin, White mineral oil. Application: Thermosets & Composites, Rubber & Elastomers, Masterbatch & Compounders. Function: ADDITIVES, Adhesion Promoters. Physical Form: Solid. Recommended Dosage: 30-50%. Product Code: PIM000039769. | Australia |
| EASTOTAC C-100XF | EASTOTAC C100-XF resin is a tackifier resin with a ring and ball softening point of 100°C and a molten Gardner color of <1. Eastotac C-100XF offers low initial color and excellent thermal stability. Group: Specialty chemicals, polymers. Composition: Hydrocarbon resin, White mineral oil. Application: Thermosets & Composites, Rubber & Elastomers, Masterbatch & Compounders. Function: ADDITIVES, Adhesion Promoters. Physical Form: Solid. Recommended Dosage: 30-50%. Product Code: PIM000039770. | Australia |
| EXTOS® ET-8010 | EXTOS is a new type of CSM with improved dynamic and low temperature properties. ET-8010__Good dynamic and low temperature properties Vulcanizing adhesion with EPDM is possible & Good resistance to cold, offering better dynamic fatigue resistance. Key Application: Automotive parts: Synchronous timing belts, poly-V-belts, coverings for the weatherstrips, Train parts : Coupling coverings, Engineering and building articles: Building gaskets. Group: Specialty chemicals, polymers. Composition: Alkylated Polyethylene. Application: Rubber & Elastomers. Physical Form: Solid. Product Code: PIM000032222. | Australia |
| FINE BLEND® CMG5701 | FINE-BLEND® CMG5701 is a low TVOC maleic anhydride modified polypropylene recommended for long fiber reinforced polypropylene (LFT-PP) modification. It has high graft ratio and great high temperature stability in processing. FINE-BLEND® CMG5701 can provide excellent adhesion between PP and polar substrates such as glass, metal, minerals etc. Due to the low smell and TVOC characteristics and stable high temperature process performance, it is recommended used in LFT-PP production. Group: Specialty chemicals, polymers. Composition: PP-g-MAH. Application: Masterbatch & Compounders. Function: Dispersing Agents, ADDITIVES, Coupling Agents / Chain Extenders. Physical Form: Solid. Product Code: PIM000005687. | Australia |
| FINE-BLEND® CMG9801 | FINE-BLEND® CMG9801 is a maleic anhydride modified polypropylene with excellent long-term thermal-aging property recommended for PP modification. FINE-BLEND® CMG9801 can provide excellent adhesion between PP and polar substrates such as glass, metal, minerals etc., and high reactivity with some chemical groups(-NH2,-OH). It suitable for fiber glass reinforced PP compounds, mineral filled PP compounds, PP based WPS and PP based alloys, especially in aging-resistant composite material system. Group: Specialty chemicals, polymers. Composition: PP-g-MAH. Application: Masterbatch & Compounders. Function: Dispersing Agents. Physical Form: Solid. Product Code: PIM000005690. | Australia |
| FINE-BLEND® FB16E5 | FINE-BLEND® FB16E5 is recommend ed for used in aluminum panel composite as a coupling agent which can improve the adhesion of aluminum and polyolefin resin, it also can be used between other polar material and non polar material as adhesive resin. Group: Specialty chemicals, polymers. Composition: Maleic anhydride grafted Polyolefin. Application: FibersTextiles & Films. Function: Coupling Agents / Chain extenders. Physical Form: Micronized Powder. Product Code: PIM000023959. | Australia |
| FINNTALC M30 | FINNTALC M30 is a functional extender made from a hydrated magnesium silicate with a chemical formula of Mg3Si4O10(OH)2. That provides great properties of being good barrier properties, good anti-corrosion properties, good reinforcement of paint film, good adhesion and standability, and matting of high PVC paint. FINNTALC M30 is perfect for your application in paints & coating, adhesives, sealants, plastics & fertilisers. Group: Specialty chemicals, paints & coatings. Composition: Talc (Mg3H2(SiO3)4), Dolomite. Application: Adhesives & Sealants, Automotive Paints. Function: ADDITIVES, Other. Physical Form: Nano powder. Product Code: PIM000039173. | Australia |
| GANTREZ MS-955 | GANTREZ MS-955 polymer by Ashland Specialty Chemical acts as a thickening agent. It is a mixed sodium and calcium salt of methyl vinyl ether and maleic anhydride copolymer. The polymer is slowly soluble in water resulting in amber-colored solutions with high viscosity and adhesion. The cations form salt bridges which crosslink the polymer chains. Group: Personal care ingredients, cosmetics & toiletries. CAS No. 94290-13-8. Composition: Mixed Na/Ca salts of the copolymer of methyl vinyl ether/maleic anhydride copolymer. Application: Oral Care, Soap & Bath. Physical Form: Powder. Recommended Dosage: 30-40%. INCI Name: Calcium/Sodium PVM/MA Copolymer. Product Code: PIM000004876. | Australia |
| golden 464 soy wax flakes bags | Golden Wax 464 Soy Wax Flakes are easy to use professional grade soy wax made from hydrogenated soy oil with a soy-based additive. It is 100% pure soy wax, a natural alternative vegetable wax, and kosher. The soy-based additive allows the wax to be poured at a hotter temperature, around 75°C, which helps reduce frosting and increase fragrance oil percentage. It has a lower melt point, aiding in burn quality and providing better glass adhesion, making it suitable for container candles, tealights, and clam shell melts, but not for molds. This wax does not require any additional additives and is formaldehyde-free, natural, not organic, and not food grade. Specifications include a white color, pour temperature of 65-80°C, melt point of 46-49°C, and fragrance oil load of 8%-10%. Pack Sizes: 400g, 1Kg, 2Kg, 5Kg, 10Kg, 20Kg. Product ID: 1G_GOLDENWAX_464. |  |
| GRIPPER X2 | GRIPPER X2 is a liquid anti-stripping agent with no volatile solvents for hot mix asphalt. This product can be incorporated directly into the asphalt with excellent heat resistance obtaining high affinity with Calcium and Silicate aggregates. Group: Specialty chemicals, paints & coatings. CAS No. 12645-31-7. Composition: Phosphorus. Application: Construction. Function: ADDITIVES, Adhesion Promoters. Physical Form: Liquid. Certification: AICS. Product Code: PIM000010187. | Australia |
| HJSIL ® 200 | HJSIL® 200 is a kind of hydrophilic fumed silica with a specific surface area of 200 m2/g. Its high purity white colloidal powder. Application: HTV and RTV silicone rubber, Adhesives and sealants, Paints, coatings and pigments, Printing inks, Cable compounds, Unsaturated polyester resins, laminated resins and Gel coats. Group: Specialty chemicals, paints & coatings, polymers. Composition: hydrophilic fumed silica. Application: Rubber & Elastomers, Printing Inks, Can, Coil and Industrial, Can, Coil and Industrial, Automotive Paints, Adhesives & Sealants. Function: ADDITIVES, Adhesion Promoters. Physical Form: Nano powder. Product Code: PIM000031790. | Australia |
| ITAMINE CA165 | ITAMINE CA165 is a cycloaliphatic polyamine adduct, ideal as a curing agent for epoxy flooring applications, offering low viscosity, excellent reactivity at low temperatures, self-leveling properties, flexibility, and adhesion to wet concrete. Group: Specialty chemicals, electronic & specialties, paints & coatings, polymers. Composition: Formulated Cycloaliphatic Polyamine Adduct. Application: Can, Coil and Industrial, Construction. Function: ADDITIVESOther. Physical Form: Liquid. Product Code: PIM000053036. | Australia |
| ITAMINE CA396 | ITAMINE CA396 is a benzyl alcohol-free cycloaliphatic polyamine curing agent, ideal for epoxy flooring applications, including primers, grouts, and mortars. It offers excellent adhesion to wet concrete, self-leveling properties, and superior curing performance even under adverse conditions of moisture and temperature, resulting in a shiny and defect-free surface. Group: Specialty chemicals, paints & coatings. CAS No. 61788-44-1. Composition: 4,4'- Isopropylidenediphenol, mphenylenebis( methylam ine). Application: CanCoil and Industrial. Function: ADDITIVESCatalysts - Crosslinkers. Physical Form: Liquid. Product Code: PIM000088840. | Australia |
| ITAMINE CA489 | ITAMINE CA489 is a cycloaliphatic polyamine adduct tailored for epoxy flooring applications, serving as a curing agent. This version, free of salicylic acid, offers medium viscosity and exhibits good reactivity even at low temperatures. With excellent self-leveling properties and good flexibility, it ensures strong adhesion to wet or moist concrete surfaces, making it ideal for solvent-free coatings. Group: Specialty chemicals, electronic & specialties, paints & coatings, polymers. Composition: Formulated Cycloaliphatic Polyamine Adduct. Application: Can, Coil and Industrial, Construction. Function: ADDITIVES, Other, ADDITIVES, Coupling Agents / Chain Extenders. Physical Form: Liquid. Product Code: PIM000053045. | Australia |
| KRISTALEX 1120 HYDROCARBON RESIN | KRISTALEX 1120 HYDROCARBON RESIN is a water-white, highly color stable, nonpolar, low molecular weight thermoplastic polymer. This resin is compatible with a wide variety of oils, waxes, alkyds, plastics, and elastomers, and is soluble in many common organic solvents. It is indicated for use in plastics modification, adhesives, coatings, sealants, and caulks. Group: Specialty chemicals, paints & coatings. Composition: No Hazardous Ingredients. Application: Printing Inks, Can, Coil and Industrial, Can, Coil and Industrial, Adhesives & Sealants. Function: ADDITIVES, Waxes, Other, Adhesion Promoters. Physical Form: Solid. Product Code: PIM000039794. | Australia |
| LACPER 4101 | LACPER 4101 is an aqueous oil modified polyurethane dispersion. It has good wetting ability on wood substrate, also has good film building, film clarity and wood warming effect. When used in water base 1K or 2K coatings, it shows very fast film hardness development, it also has good adhesion on different substrate such as PU/PE/UV/melamine. It has good stability and compa- tibility with ethanol and dyes when used in shading stain.The product contains no solvent,APEO and Organotin. Less than 1% TEA is used as neutralizing agent. Bactericide: CMIT:MIT=3:1 12 ppm, MIT: 100ppm. Group: Specialty chemicals, paints & coatings. Composition: Polyurethane. Application: Printing Inks, Architectural and Deco., Can, Coil and Industrial, Automotive Paints. Function: BINDERS, Polyurethan Dispersions. Physical Form: Dispersion. Certification: REACH. Product Code: PIM000007470. | Australia |
| LAMINIXYL IS | LAMINIXYL IS biofunctional by Ashland Specialty Chemical acts as an anti-aging active. It is a laminin-5 peptide designed to help preserve skin integrity and the dermal-epidermal junction. It stimulates the synthesis of laminin-5 and b1 integrin and keratins involved in cell-to-cell adhesion, improving the skin barrier function. It promotes the synthesis of extracellular matrix proteins, thereby consolidating the support network of the skin. Group: Personal care ingredients, cosmetics & toiletries. CAS No. 90082-41-0, 56-81-5, 7732-18-5. Composition: Vegetal Extract. Application: Skin Care, Baby Care. Function: Active. Physical Form: Liquid. Recommended Dosage: 0.5%. INCI Name: Water (and) Butylene Glycol (and) Heptapeptide-8. Claim: Anti-Aging. Product Code: PIM000004896. | Australia |
| LIVEO PHARMA 50 TUBING | LIVEO PHARMA 50 TUBING is a top-of-the-line product designed for use in the pharmaceutical and biotechnology industries. This high-quality tubing is made from a specially-formulated silicone material that is ultra-pure, biocompatible, and able to withstand extreme temperatures and harsh chemical environments. LIVEO PHARMA 50 TUBING is manufactured under strict quality control measures to ensure its integrity and reliability. Its ultra-smooth inner surface minimizes the risk of particle adhesion and bacteria growth, making it an ideal choice for transferring sensitive and delicate fluids. LIVEO PHARMA 50 TUBING is the perfect solution for your tubing needs. Its excellent mechanical strength and flexibility make it easy to handle and install, while its consistent performance ensures consistent results. Group: Pharmaceutical ingredients, packing materials. Composition: Silicone Elastomer. Application: Primary Packaging. Physical Form: Solid. Product Code: PIM000060482. | Australia |
| LUNA-CRYL A-725 | LUNA-CRYL A-725 is a thermoplastic, solid acrylic resin thats provides a good adhesion and flexibility with excellent dispersion and leveling properties. LUNA-CRYL A-725 can be used in industrial coatings, concrete sealers, and plastic coatings. Group: Specialty chemicals, paints & coatings. Composition: Solid Acrylic Resin. Application: Architectural and Deco., Can, Coil and Industrial, Powder Coating. Function: Alkyd Resins. Physical Form: Micronized Powder. Product Code: PIM000053740. | Australia |
| LUNA-SIL 602 | LUNA-SIL 602 is an amino silicone commonly used in textiles, its strong affinity to fibres provides fabrics with softness, anti-crease and anti-static properties. LUNA-SIL 602 is used in applications including. paints, inks, foundry resins, adhesives, sealants and fibreglass. Group: Specialty chemicals, paints & coatings. CAS No. 3069-29-2. Composition: 3- (2-Aminoethylamino) propyldimethoxymethylsilane. Application: Adhesives & Sealants. Function: Adhesion Promoters. Physical Form: Liquid. Product Code: PIM000051973. | Australia |
| PICCOTAC 1100 HYDROCARBON RESIN | PICCOTAC 1100 HYDROCARBON RESIN is a 100°C softening point, thermoplastic, moderate molecular weight, aliphatic C5 resin. Group: Specialty chemicals, polymers. Composition: Hydrocarbon resin, White mineral oil. Application: Thermosets & Composites, Fibers, Textiles & Films, Fibers, Textiles & Films. Function: ADDITIVES, Adhesion Promoters. Physical Form: Solid. Recommended Dosage: 30-50%. Product Code: PIM000039771. | Australia |
| PLASCIZE L-2200 | PLASCIZE L-2200 is a newly developed nonionic acrylic polymer by GOO CHEMICAL. This particular model features moderate adhesion even in its dried state, hence the re-styling ability. In comparison to our existing model of Plascize L-222, L-2200 has a higher filming ability that helps to gather hair strings better when styling. For that L-2200 has a really good balance of stickiness and dryness, it does not get overly heavy on the hair, but retains a good amount of adhesion for an easier and more pleasant re-styling experience. Group: Personal care ingredients, cosmetics & toiletries. CAS No. 115111-25-6, 64-17-5, 7732-18-5. Composition: Polymer. Application: Hair Care. Function: Styling Polymer, Fixative. Physical Form: Liquid. Recommended Dosage: 1 - 20%. INCI Name: Hydroxyethyl/Methoxyethyl Acrylate Copolymer. Product Code: PIM000001494. | Australia |
| PLASCIZE L-514 | PLASCIZE L-514 is a cationic polymer that has good affinity and outstanding adhesion to the hair, hence the good anti-flaking ability. PLASCIZE L-514 is different from general cationic polymers because it has an excellent water-repelling characteristic. Hair treated by PLASCIZE L-514 would carry out great resisting ability against shampoo which results in long lasting effect. It would remain on hair for about three weeks (roughly twenty shampoo washes). Group: Personal care ingredients, cosmetics & toiletries. Composition: Polymer. Application: Hair Care. Function: Fixative. Physical Form: Liquid. Recommended Dosage: 1 - 20%. INCI Name: Polyquaternium-99. Product Code: PIM000001502. | Australia |
| PLASTOLYN 290 HYDROCARBON RESIN | PLASTOLYN 290 HYDROCARBON RESIN is a versatile, aromatic, water-white, very high softening point resin for use in polymer modification, adhesives, overprint lacquers, coatings and a variety of other applications. Recommended as a flow modifier in such polymers as polyvinylchloride (PVC), acrylonitrile-butadiene-styrene (ABS) and styrenic block copolymers. Its water white color and good economy, combined with superior heat and ultraviolet light (UV) stability compared with conventional C9 hydrocarbon resins, provide formulators a new level of quality without sacrificing competitiveness. Group: Specialty chemicals, paints & coatings. Composition: Hydrocarbon polymer. Application: Powder Coating, Construction, Printing Inks, Can, Coil and Industrial, Can, Coil and Industrial, Adhesives & Sealants. Function: ADDITIVES, Adhesion Promoters, POLYMERS, Other. Physical Form: Solid. Product Code: PIM000039795. | Australia |
| POLYVINYL ACETATE EMULSION AE-150L | CCP AE-150L is a polyvinyl alcohol stabilized polyvinyl acetate homo-polymer. emulsion designed for general adhesives of wood, paper and cotton fabrics. AE-150L is an emulsion with high solid content, strong adhesion at. initial stage and good work-ability for fast adhesion. Group: Specialty chemicals, paints & coatings. Application: Construction. Function: BINDERSVinyl Acetate Emulsions. Physical Form: Emulsion. Certification: AICS. Product Code: PIM000089046. | Australia |
| PRETIOX R200P | PHOTOMER 4184 is a monofunctional urethane acrylate which can be used as a reactive diluent for radiation curable coatings, inks and adhesives. It is non-yellowing with a low odour and offers improved flexibility and adhesion to plastics. It exhibit of low shrinkage and high elongation and stress at break with a Tg of - 3 °C. Group: Specialty chemicals, paints & coatings. CAS No. 13463-67-7. Composition: Application: Architectural and Deco. Function: TiO2. Physical Form: Solid. Product Code: PIM000005978. | Australia |
| PVA BP-05 | Polyvinyl Alcohol (PVA) is a water soluble and biodegradable synthetic polymer. It is a dry solid, and is available in granule and powdered forms. Grades include both fully hydrolyzed and partially hydrolyzed. PVA is an excellent adhesive with superior bonding strength, film forming and emulsifying properties. The film of PVA exhibits outstanding resistance to oil, grease and solvents. In addition to its film forming property, it has excellent adhesion to both hydrophilic and hydrophobic materials. Group: Specialty chemicals, paints & coatings. CAS No. 25213-24-5. Composition: Water-soluble synthetic polymer. Application: Construction. Function: POLYMERS, Other. Physical Form: Micronized Powder. Certification: AICS. Product Code: PIM000031743. | Australia |
| PVA BP-17 | Polyvinyl Alcohol (PVA) is a water soluble and biodegradable synthetic polymer. It is a dry solid, and is available in granule and powdered forms. Grades include both fully hydrolyzed and partially hydrolyzed. PVA is an excellent adhesive with superior bonding strength, film forming and emulsifying properties. The film of PVA exhibits outstanding resistance to oil, grease and solvents. In addition to its film forming property, it has excellent adhesion to both hydrophilic and hydrophobic materials. Group: Specialty chemicals, paints & coatings. CAS No. 25213-24-5. Composition: Water-soluble synthetic polymer. Application: Construction. Function: POLYMERS, Other. Physical Form: Micronized Powder. Certification: AICS. Product Code: PIM000031745. | Australia |
| Silaplane FM-0411P | Silaplane FM-04 series, including Silaplane FM-0411P with a Molecular Weight (Mn) of 1000, can react with urethane resins and polyesters to impart the excellent properties of silicone to various organic resins. As a result, Silaplane can be used as a raw material for polymers, filler dispersants, and surface treatment agents. Group: Specialty chemicals, electronic & specialties, paints & coatings, polymers. CAS No. 207308-30-3, 191920-47-5. Composition: Reactive silicone. Application: Adhesives & Sealants, Architectural and Deco., Automotive Paints, Construction, Electronic Chemicals, Fibers, Textiles & Films, Lamination and Converting, Masterbatch & Compounders, Polymer Producers, Powder Coating, Printing Inks, Rubber & Elastomers, Thermosets & Composites, Thermoplastic Transformers. Function: Adhesion Promoters, Anti-Graffiti, Antiscratch, Coupling Agents / Chain extenders, Dispersing Agents, Intermediates & Accelerators, Optical Materials, Other, Reagents, Rheology Modifiers, Semiconductor Materials, Surface Modifiers - Defoamers, Water Repellents, Acrylic Dispersions, Acrylic Emulsions, Acrylic Resins, Amino - Melamine - Urea Resins, Epoxy Resins, Phenolic Resins, Polyamide, Polyisocyanates, Polyurethane / Polyaspartics, Polyurethane Dispersions, Redispersable Powder, SBR Emulsions, Silane Terminated Polyethers, Silicone Resins, Styrene-Acrylic Dispersions, UV Binders and Oligomers, Vinyl Resins, Complex Inorganic Pigments, Functional Dyes, Iron Oxide, TiO2 (Titanium Dioxide), POLYMERS, Polymer Producers/Rheology modifier, SBR, Silicone Rubber, TPU, Raw Material for Electronics. Physical Form: Liquid. Recommended Dosage: 0.1-10% (Often in the range of 0.5-3%.). Certification: NDSL, ENCS. Product Code: PIM000088302. | Australia |
| Silaplane FM-0421 | Silaplane FM-04 series, including Silaplane FM-0421 with a Molecular Weight (Mn) of 5000, can react with urethane resins and polyesters to impart the excellent properties of silicone to various organic resins. As a result, Silaplane can be used as a raw material for polymers, filler dispersants, and surface treatment agents. Group: Specialty chemicals, electronic & specialties, paints & coatings, polymers. CAS No. 207308-30-3, 191920-47-5. Composition: Reactive silicone. Application: Adhesives & Sealants, Architectural and Deco., Automotive Paints, Construction, Electronic Chemicals, Fibers, Textiles & Films, Lamination and Converting, Masterbatch & Compounders, Polymer Producers, Powder Coating, Printing Inks, Rubber & Elastomers, Thermosets & Composites, Thermoplastic Transformers. Function: Adhesion Promoters, Anti-Graffiti, Antiscratch, Coupling Agents / Chain extenders, Dispersing Agents, Intermediates & Accelerators, Optical Materials, Other, Reagents, Rheology Modifiers, Semiconductor Materials, Surface Modifiers - Defoamers, Water Repellents, Acrylic Dispersions, Acrylic Emulsions, Acrylic Resins, Amino - Melamine - Urea Resins, Epoxy Resins, Phenolic Resins, Polyamide, Polyisocyanates, Polyurethane / Polyaspartics, Polyurethane Dispersions, Redispersable Powder, SBR Emulsions, Silane Terminated Polyethers, Silicone Resins, Styrene-Acrylic Dispersions, UV Binders and Oligomers, Vinyl Resins, Complex Inorganic Pigments, Functional Dyes, Iron Oxide, TiO3 (Titanium Dioxide), POLYMERS, Polymer Producers/Rheology modifier, SBR, Silicone Rubber, TPU, Raw Material for Electronics. Physical Form: Liquid. Recommended Dosage: 0.1-10% (Often in the range of 0.5-3%.). Certification: NDSL, ENCS. Product Code: PIM000088303. | Australia |
| Silaplane FM-0425 | Silaplane FM-04 series, including Silaplane FM-0425 with a Molecular Weight (Mn) of 10000, can react with urethane resins and polyesters to impart the excellent properties of silicone to various organic resins. As a result, Silaplane can be used as a raw material for polymers, filler dispersants, and surface treatment agents. Group: Specialty chemicals, electronic & specialties, paints & coatings, polymers. CAS No. 207308-30-3, 191920-47-5. Composition: Reactive silicone. Application: Adhesives & Sealants, Architectural and Deco., Automotive Paints, Construction, Electronic Chemicals, Fibers, Textiles & Films, Lamination and Converting, Masterbatch & Compounders, Polymer Producers, Powder Coating, Printing Inks, Rubber & Elastomers, Thermosets & Composites, Thermoplastic Transformers. Function: Adhesion Promoters, Anti-Graffiti, Antiscratch, Coupling Agents / Chain extenders, Dispersing Agents, Intermediates & Accelerators, Optical Materials, Other, Reagents, Rheology Modifiers, Semiconductor Materials, Surface Modifiers - Defoamers, Water Repellents, Acrylic Dispersions, Acrylic Emulsions, Acrylic Resins, Amino - Melamine - Urea Resins, Epoxy Resins, Phenolic Resins, Polyamide, Polyisocyanates, Polyurethane / Polyaspartics, Polyurethane Dispersions, Redispersable Powder, SBR Emulsions, Silane Terminated Polyethers, Silicone Resins, Styrene-Acrylic Dispersions, UV Binders and Oligomers, Vinyl Resins, Complex Inorganic Pigments, Functional Dyes, Iron Oxide, TiO4 (Titanium Dioxide), POLYMERS, Polymer Producers/Rheology modifier, SBR, Silicone Rubber, TPU, Raw Material for Electronics. Physical Form: Liquid. Recommended Dosage: 0.1-10% (Often in the range of 0.5-3%.). Certification: NDSL, ENCS. Product Code: PIM000088304. | Australia |
| Silaplane FM-0711 | Silaplane FM-07 series, including Silaplane FM-0711 with a Molecular Weight (Mn) of 1000, can react with Acrylic resins to impart the excellent properties of silicone to various organic resins. As a result, Silaplane can be used as a raw material for polymers. Group: Specialty chemicals, polymers, electronic & specialties, paints & coatings. CAS No. 146632-07-7. Composition: Reactive silicone. Application: Adhesives & Sealants, Architectural and Deco., Automotive Paints, Construction, Electronic Chemicals, Fibers, Textiles & Films, Lamination and Converting, Masterbatch & Compounders, Polymer Producers, Powder Coating, Printing Inks, Rubber & Elastomers, Thermosets & Composites, Thermoplastic Transformers. Function: Adhesion Promoters, Anti-Graffiti, Antiscratch, Coupling Agents / Chain extenders, Dispersing Agents, Intermediates & Accelerators, Optical Materials, Other, Reagents, Rheology Modifiers, Semiconductor Materials, Surface Modifiers - Defoamers, Water Repellents, Acrylic Dispersions, Acrylic Emulsions, Acrylic Resins, Amino - Melamine - Urea Resins, Epoxy Resins, Phenolic Resins, Polyamide, Polyisocyanates, Polyurethane / Polyaspartics, Polyurethane Dispersions, Redispersable Powder, SBR Emulsions, Silane Terminated Polyethers, Silicone Resins, Styrene-Acrylic Dispersions, UV Binders and Oligomers, Vinyl Resins, Complex Inorganic Pigments, Functional Dyes, Iron Oxide, TiO5 (Titanium Dioxide), POLYMERS, Polymer Producers/Rheology modifier, SBR, Silicone Rubber, TPU, Raw Material for Electronics. Physical Form: Liquid. Recommended Dosage: 0.1-10% (Often in the range of 0.5-3%.). Certification: ENCS. Product Code: PIM000056806. | Australia |
| Silaplane FM-0721 | Silaplane FM-07 series, including Silaplane FM-0721 with a Molecular Weight (Mn) of 5000, can react with Acrylic resins to impart the excellent properties of silicone to various organic resins. As a result, Silaplane can be used as a raw material for polymers. Group: Specialty chemicals, polymers, electronic & specialties, paints & coatings. CAS No. 146632-07-7. Composition: Reactive silicone. Application: Adhesives & Sealants, Architectural and Deco., Automotive Paints, Construction, Electronic Chemicals, Fibers, Textiles & Films, Lamination and Converting, Masterbatch & Compounders, Polymer Producers, Powder Coating, Printing Inks, Rubber & Elastomers, Thermosets & Composites, Thermoplastic Transformers. Function: Adhesion Promoters, Anti-Graffiti, Antiscratch, Coupling Agents / Chain extenders, Dispersing Agents, Intermediates & Accelerators, Optical Materials, Other, Reagents, Rheology Modifiers, Semiconductor Materials, Surface Modifiers - Defoamers, Water Repellents, Acrylic Dispersions, Acrylic Emulsions, Acrylic Resins, Amino - Melamine - Urea Resins, Epoxy Resins, Phenolic Resins, Polyamide, Polyisocyanates, Polyurethane / Polyaspartics, Polyurethane Dispersions, Redispersable Powder, SBR Emulsions, Silane Terminated Polyethers, Silicone Resins, Styrene-Acrylic Dispersions, UV Binders and Oligomers, Vinyl Resins, Complex Inorganic Pigments, Functional Dyes, Iron Oxide, TiO6 (Titanium Dioxide), POLYMERS, Polymer Producers/Rheology modifier, SBR, Silicone Rubber, TPU, Raw Material for Electronics. Physical Form: Liquid. Recommended Dosage: 0.1-10% (Often in the range of 0.5-3%.). Certification: ENCS. Product Code: PIM000005671. | Australia |
| Silaplane FM-0725 | Silaplane FM-07 series, including Silaplane FM-0725 with a Molecular Weight (Mn) of 10000, can react with Acrylic resins to impart the excellent properties of silicone to various organic resins. As a result, Silaplane can be used as a raw material for polymers. Group: Specialty chemicals, electronic & specialties, paints & coatings, polymers. CAS No. 146632-07-7. Composition: Reactive silicone. Application: Adhesives & Sealants, Architectural and Deco., Automotive Paints, Construction, Electronic Chemicals, Fibers, Textiles & Films, Lamination and Converting, Masterbatch & Compounders, Polymer Producers, Powder Coating, Printing Inks, Rubber & Elastomers, Thermosets & Composites, Thermoplastic Transformers. Function: Adhesion Promoters, Anti-Graffiti, Antiscratch, Coupling Agents / Chain extenders, Dispersing Agents, Intermediates & Accelerators, Optical Materials, Other, Reagents, Rheology Modifiers, Semiconductor Materials, Surface Modifiers - Defoamers, Water Repellents, Acrylic Dispersions, Acrylic Emulsions, Acrylic Resins, Amino - Melamine - Urea Resins, Epoxy Resins, Phenolic Resins, Polyamide, Polyisocyanates, Polyurethane / Polyaspartics, Polyurethane Dispersions, Redispersable Powder, SBR Emulsions, Silane Terminated Polyethers, Silicone Resins, Styrene-Acrylic Dispersions, UV Binders and Oligomers, Vinyl Resins, Complex Inorganic Pigments, Functional Dyes, Iron Oxide, TiO7 (Titanium Dioxide), POLYMERS, Polymer Producers/Rheology modifier, SBR, Silicone Rubber, TPU, Raw Material for Electronics. Physical Form: Liquid. Recommended Dosage: 0.1-10% (Often in the range of 0.5-3%.). Certification: ENCS. Product Code: PIM000088305. | Australia |
| Silaplane FM-7711 | Silaplane FM-77 series, including Silaplane FM-7711 with a Molecular Weight (Mn) of 1000, can react with Acrylic resins to impart the excellent properties of silicone to various organic resins. As a result, Silaplane can be used as a raw material for polymers. Group: Specialty chemicals, electronic & specialties, paints & coatings, polymers. CAS No. 58130-03-3, 804475-35-2. Composition: Reactive silicone. Application: Adhesives & Sealants, Architectural and Deco., Automotive Paints, Construction, Electronic Chemicals, Fibers, Textiles & Films, Lamination and Converting, Masterbatch & Compounders, Polymer Producers, Powder Coating, Printing Inks, Rubber & Elastomers, Thermosets & Composites, Thermoplastic Transformers. Function: Adhesion Promoters, Anti-Graffiti, Antiscratch, Coupling Agents / Chain extenders, Dispersing Agents, Intermediates & Accelerators, Optical Materials, Other, Reagents, Rheology Modifiers, Semiconductor Materials, Surface Modifiers - Defoamers, Water Repellents, Acrylic Dispersions, Acrylic Emulsions, Acrylic Resins, Amino - Melamine - Urea Resins, Epoxy Resins, Phenolic Resins, Polyamide, Polyisocyanates, Polyurethane / Polyaspartics, Polyurethane Dispersions, Redispersable Powder, SBR Emulsions, Silane Terminated Polyethers, Silicone Resins, Styrene-Acrylic Dispersions, UV Binders and Oligomers, Vinyl Resins, Complex Inorganic Pigments, Functional Dyes, Iron Oxide, TiO11 (Titanium Dioxide), POLYMERS, Polymer Producers/Rheology modifier, SBR, Silicone Rubber, TPU, Raw Material for Electronics. Physical Form: Liquid. Recommended Dosage: 0.1-10% (Often in the range of 0.5-3%.). Certification: ENCS. Product Code: PIM000088310. | Australia |
| Silaplane FM-7721 | Silaplane FM-77 series, including Silaplane FM-7721 with a Molecular Weight (Mn) of 5000, can react with Acrylic resins to impart the excellent properties of silicone to various organic resins. As a result, Silaplane can be used as a raw material for polymers. Group: Specialty chemicals, electronic & specialties, paints & coatings, polymers. CAS No. 58130-03-3, 804475-35-2. Composition: Reactive silicone. Application: Adhesives & Sealants, Architectural and Deco., Automotive Paints, Construction, Electronic Chemicals, Fibers, Textiles & Films, Lamination and Converting, Masterbatch & Compounders, Polymer Producers, Powder Coating, Printing Inks, Rubber & Elastomers, Thermosets & Composites, Thermoplastic Transformers. Function: Adhesion Promoters, Anti-Graffiti, Antiscratch, Coupling Agents / Chain extenders, Dispersing Agents, Intermediates & Accelerators, Optical Materials, Other, Reagents, Rheology Modifiers, Semiconductor Materials, Surface Modifiers - Defoamers, Water Repellents, Acrylic Dispersions, Acrylic Emulsions, Acrylic Resins, Amino - Melamine - Urea Resins, Epoxy Resins, Phenolic Resins, Polyamide, Polyisocyanates, Polyurethane / Polyaspartics, Polyurethane Dispersions, Redispersable Powder, SBR Emulsions, Silane Terminated Polyethers, Silicone Resins, Styrene-Acrylic Dispersions, UV Binders and Oligomers, Vinyl Resins, Complex Inorganic Pigments, Functional Dyes, Iron Oxide, TiO12 (Titanium Dioxide), POLYMERS, Polymer Producers/Rheology modifier, SBR, Silicone Rubber, TPU, Raw Material for Electronics. Physical Form: Liquid. Recommended Dosage: 0.1-10% (Often in the range of 0.5-3%.). Certification: ENCS. Product Code: PIM000088311. | Australia |
Our database is helping our users find suppliers everyday.
