Find where to buy products from Australian suppliers, including: distributors, industrial manufacturers, bulk supplies and wholesalers of raw ingredients & finished goods.
Search for products or services, then visit the suppliers website for prices, SDS or more information. You can also view suppliers in NZ, UK or the USA.
| Product | Description | |
|---|---|---|
| 128 - RE-ADD - Polyurethane Adduct | Solid granule for use in solvent based PU adhesives. APPLICATIONS: Footwear and fabric lamination. Use on PVC and leather. PROCESSING: Adhesive. Polyurethane Manufacturers and specialist polyurethane suppliers to plastics manufacturers, processors & designers Australian-wide. |  Victoria |
| 3M GLASS BUBBLES K15 | Glass Bubbles K15 have a density of 0.15 g/cc and an isostatic crush strength of 300 psi. 3M glass bubbles K15 are ideal for use in a variety of water buoyancy applications, including additives in buoys and moorings. Like all 3M glass bubbles, K15 bubbles are compatible thermoset resins like polyurethane and epoxy, and are virtually insoluble in water. Group: Specialty chemicals, paints & coatings. Composition: Soda-lime-borosilicate glass. Application: Architectural and Deco., Adhesives & Sealants, Automotive Paints, Lamination and Converting, Powder Coating, Can, Coil and Industrial. Physical Form: Nano powder. Product Code: PIM000031756. |  Australia |
| 3M GLASS BUBBLES K20 | 3M GLASS BUBBLES. K20 have a density of 0.20 g/cc and an isostatic crush strength of 500 psi. These general purpose spheres have a good strength-to-density ratio and are designed for use in a variety of shallow water (e.g. up to 2,000 feet of sea water) buoyancy applications, as well as emulsion explosives. Group: Specialty chemicals, paints & coatings. Composition: Soda-lime-borosilicate glass. Application: Architectural and Deco., Adhesives & Sealants, Automotive Paints, Lamination and Converting, Powder Coating, Can, Coil and Industrial. Physical Form: Nano powder. Product Code: PIM000031757. | Australia |
| 3M GLASS BUBBLES K25 | 3M glass bubbles K25 ideal additives for shallow water buoyancy applications or processing applications where high strength is needed. In addition, like all 3M glass bubbles, K25 bubbles are compatible with thermoset resins like polyurethane and epoxy, and are virtually insoluble in water. Application: Paints and Coatings, Rubber and Plastic, Transportation. Group: Specialty chemicals, paints & coatings. Composition: Soda-lime-borosilicate glass. Application: Architectural and Deco., Adhesives & Sealants, Automotive Paints, Lamination and Converting, Powder Coating, Can, Coil and Industrial. Physical Form: Nano powder. Product Code: PIM000031758. | Australia |
| 3M GLASS BUBBLES S28HS | Glass Bubbles S28HS are hollow glass spheres with a typical density of 0.28 g/cc and an isostatic crush strength of 3,000 psi. These glass bubbles are designed for numerous applications such as deep water syntactic foams and airless spray coatings. The bubbles produce strong, stable voids with low thermal conductivity, helping the coating achieve the necessary compressive strength. The S28HS Glass Bubbles offer a very good strength-to-density ratio and small particle size, making them suitable for a variety of applications such as buoyancy in oil and gas, airless sprayable paints and coatings, adhesives, mastics, sealants, SMC and other thermoset resin systems. Group: Specialty chemicals, paints & coatings. Composition: Soda-lime-borosilicate glass. Application: Architectural and Deco., Adhesives & Sealants, Automotive Paints, Lamination and Converting, Powder Coating, Can, Coil and Industrial. Physical Form: Nano powder. Product Code: PIM000031760. | Australia |
| 94007 - RE-ADD - Polyurethane Adduct | Solid granule for use in solvent based PU adhesives. High heat resistance and good hydrolytic resistance. APPLICATIONS: Single Pack Footwear Adhesive. Use on PVC and leather. PROCESSING: Adhesive. Polyurethane Manufacturers and specialist polyurethane suppliers to plastics manufacturers, processors & designers Australian-wide. | Victoria |
| A-C 316 | A-C 316 is a hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion resistance by lowering the coefficient of friction. In textiles, this can help improve sewability and fabric cutting, helping to extend cutting machine lifetime. Its acid number of 16 allows it to be emulsified into water. Can also provide heat resistance to hot melt adhesives (HMAs). In addition, may be used as a metal release agent for PVC processing and is a fusion control for PVC formulations. It will not affect clarity in transparent PVC applications. Very effective for use in processing PVC regrind. Group: Specialty chemicals, polymers. CAS No. 9002-88-4. Composition: OPE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.1~2%. Certification: REACH, Food Contact. Product Code: PIM000007937. | Australia |
| A-C 325 | A-C 325 is a hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion resistance by lowering the coefficient of friction. In textiles, this can help improve sewability and fabric cutting, extending cutting machine lifetime. Its acid number of 25 allows it to be emulsified into water. Can also provide heat resistance to hot melt adhesives (HMAs). Group: Specialty chemicals, polymers. CAS No. 68441-17-8. Composition: OPE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007915. | Australia |
| A-C 330 | A-C 330 is a hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion resistance by lowering the coefficient of friction. In textiles, can help improve sewability and fabric cutting, extending cutting machine lifetime. Its acid number is 30, which allows it to be emulsified into water. Can also provide heat resistance to hot melt adhesives (HMAs). Group: Specialty chemicals, polymers, paints & coatings. CAS No. 68441-17-8. Composition: OPE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Can, Coil and Industrial. Function: Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007921. | Australia |
| A-C® 3325 | A-C® 3325 is a hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion resistance by lowering the coefficient of friction. In textiles, this can help improve sewability and fabric cutting, extending cutting machine lifetime. Its acid number of 25 allows it to be emulsified into water. Can also provide heat resistance to hot melt adhesives (HMAs). Group: Specialty chemicals, polymers. CAS No. 68441-17-8. Composition: OPE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007925. | Australia |
| A-C® 3330 | A-C® 3330 is hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion resistance by lowering the coefficient of friction. In textiles, can help improve sewability and fabric cutting, extending cutting machine lifetime. Its acid number is 30, which allows it to be emulsified into water. Can also provide heat resistance to hot melt adhesives (HMAs). Group: Specialty chemicals, polymers. CAS No. 68441-17-8. Composition: OPE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007926. | Australia |
| A-C 392 | A-C 392 is hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion resistance by lowering the coefficient of friction. In textiles, can help improve sewability and fabric cutting, extending cutting machine lifetime. Its acid number of 30 allows it to be emulsified into water. Can also provide heat resistance to hot melt adhesives (HMAs). Additionally, it is an effective metal release agent for cellular PVC applications. Group: Specialty chemicals, polymers. CAS No. 68441-17-8. Composition: OPE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.3~0.5%. Certification: REACH. Product Code: PIM000007923. | Australia |
| A-C® 400 | A-C® 400 is an ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 13%, used extensively in hot melt adhesives (HMAs) to control rheology and boost adhesion. It can be added as a diluent but provides the dual function of reducing application viscosity at melt, while providing an adhesion boost versus homopolymer, non functional diluents (FT, byproduct, thermally degraded (TD) and PE homopolymer waxes). It is completely miscible in EVA adhesive resins, as would be expected by the similar chemistry. It is also used in candles to provide paraffin crystal nucleation, which increases thermal and breakage resistance, adhesion to glass, and fragrance retention. Group: Specialty chemicals, polymers. CAS No. 24937-78-8. Composition: EVA WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007916. | Australia |
| A-C® 400A | A-C® 400A is a Ethylene vinyl acetate (EVA) copolymer in powder form, with a VA content of 13%, used extensively in hot melt adhesives (HMAs) to control rheology and boost adhesion. A-C® 400A displays a good benefits in providing the dual function of reducing application viscosity at melt, while providing an adhesion boost versus homopolymer, non functional diluents. A-C® 400A is suitable to use in color masterbatch as dispersing agent, process aid for EVA-based wire and cable compounds. Group: Specialty chemicals, polymers. CAS No. 24937-78-8. Composition: Ethylene Vinyl Acetate. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: Waxes, Dispersing Agents, POLYMERS, EVA. Physical Form: Nano powder. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007908. | Australia |
| A-C® 540 | A-C® 540 is an ethylene acrylic acid (EAA) copolymer in a prill form, with an acrylic acid (AA) content of 5%, for use in adhesives to promote adhesion to various substrates. It is also used in aqueous floor polishes to provide drag (raising the coefficient of friction) thereby controlling the final coefficient of friction. Its acid number of 40 aids emulsification. Also used in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. Group: Specialty chemicals, polymers. Composition: EVA WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007917. | Australia |
| A-C 540A | A-C 540A is an ethylene acrylic acid (EAA) copolymer in a powdered form, with an acrylic acid (AA) content of 5%, for use in adhesives to promote adhesion to various substrates. It is also used in aqueous floor polishes to provide drag (raising the coefficient of friction) thereby controlling the final coefficient of friction. Its acid number of 40 aids emulsification. Also used in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. Is a dispersing agent for color masterbatch in engineering resins. Excellent external lubricant for polyamide compounds. Group: Specialty chemicals, polymers. CAS No. 9010-77-9. Composition: PP-PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 2.0%. Certification: REACH. Product Code: PIM000007912. | Australia |
| AC-580 | A-C 580 ethylene acrylic acid (EAA) copolymer in a prill form, with an acrylic acid (AA) content of 10%, for use in adhesives to promote adhesion to various substrates. It is also used in aqueous floor polishes to provide drag (raising the coefficient of friction) thereby controlling the final coefficient of friction. Its acid number of 75 aids emulsification. Also used in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. Group: Specialty chemicals, polymers. CAS No. 9002-88-4. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.1~2%. Certification: REACH. Product Code: PIM000007931. | Australia |
| A-C 6 | A-C 6 is a low density polyethylene (LDPE) homopolymer in a prill form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. Can also be partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. Used in cable flooding compounds, along with polybutene. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 9002-88-4. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Adhesives & Sealants. Function: Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.1~2%. Certification: REACH. Product Code: PIM000007910. | Australia |
| A-C® 617 | A-C® 617 is a low density polyethylene (LDPE) homopolymer in a prill form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. Can also be partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. Is used as a dispersing agent in color masterbatch applications. In PVC applications it finds use as an external lubricant. Group: Specialty chemicals, polymers. Composition: EVA WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007918. | Australia |
| A-C® 617A | A-C® 617A is a low density polyethylene (LDPE) homopolymer in a powdered form. A-C® 617A displays the function in improving surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. A-C® 617A can also be partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. In PVC applications it finds use as an external lubricant. Group: Specialty chemicals, polymers. CAS No. 9002-88-4. Composition: Low Density Polyethylene. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Thermoplastic Transformers. Function: Waxes, POLYMERS, PVC. Physical Form: Micronized Powder. Recommended Dosage: 1.0%. Certification: REACH. Product Code: PIM000007913. | Australia |
| A-C® 6A | A-C® 6A is a homopolymer in a powdered form; for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. A-C® 6A can be also partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. Used in cable flooding compounds, along with polybutene. Is used as a dispersing agent in color masterbatch applications. Group: Specialty chemicals, polymers, paints & coatings. CAS No. 9002-88-4. Composition: Low Density Polyethylene. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Powder Coating, Printing Inks. Function: Waxes, Dispersing Agents, POLYMERS, Polystyrene (PS). Physical Form: Micronized Powder. Recommended Dosage: 0.1~2%. Certification: REACH, Food Contact, PICCS. Product Code: PIM000007906. | Australia |
| A-C 8 | A-C 8 is low density polyethylene (LDPE) homopolymer in a prill form, for use in solvent borne coatings, heatset and liquid solvent borne inks,to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. Can also be partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. Group: Specialty chemicals, polymers. CAS No. 9002-88-4. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.5%. Certification: REACH. Product Code: PIM000007922. | Australia |
| A-C® 9A | A-C® 9A is low density polyethylene (LDPE) homopolymer in a powdered form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. Can also be partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. Best choice in cable filling compounds to prevent oil bleed at high temperatures. Is used as a dispersing agent in color masterbatch applications. Group: Specialty chemicals, polymers. CAS No. 9002-88-4. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.1~2%. Certification: REACH. Product Code: PIM000007929. | Australia |
| Acetone - Solvent | ACETONE is a pharmaceutical grade 100% acetone solvent which is ideal in many industries as a cleaner and sanitiser. ACETONE can be used to remove nail polishes, adhesives, scuff marks on floors, permanent marker stains, ink stains on clothing. It also dissolves superglue, removes melted plastic and sticker gunk from glass & metals. This product is classified DG. Pack Sizes: 5 Litre, 20 Litres. Product ID: RM00001. Chemicals By Industry, Automotive, Chemicals By Industry, Laboratory, Chemicals By Industry, Workshop. |  Australia Wide |
| A-C POLYETHYLENE WAXES | POLYETHYLENE WAXES is low density polyethylene (LDPE) homopolymer in a powdered form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF(Coefficient of Friction). It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs (Hot Melt Adhesives). Can also be partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. In PVC applications it finds use as an external lubricant. Main application is in lip care, eye makeup & hair wax. Group: Personal care ingredients, cosmetics & toiletries. CAS No. 9002-88-4. Composition: Natural derived. Application: Color Care, Hair Care. Physical Form: Powder. INCI Name: Polyethylene. Product Code: PIM000027995. | Australia |
| ACUMIST A-12 | ACUMIST A12 is Micronized Oxidized Polyethylene Homopolymer for use in water based coatings, flexographic and gravure inks and overprint varnishes. It also can be used as a processing aid, matting and antissetling agent in paints. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 68441-17-8. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Adhesives & Sealants. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.5~1%. Certification: REACH. Product Code: PIM000007936. | Australia |
| ACUMIST C-5 | ACUMIST C-5 is medium particle size micronized Polyethylene Homopolymer for use in solvent borne coatings and solvent based flexographic inks. As with all ACumist products, it is insoluble in solvents and UV based monomers and oligomers at room temperature. best suited goroffset inks, can coatings , and all thin film solvent based coatings. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 68441-17-8. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Adhesives & Sealants. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.5~1%. Certification: REACH. Product Code: PIM000007930. | Australia |
| ACUMIST D-6 | ACUMIST D-6 is micronized Polyethylene Homopolymer for use and general purpose solvent borne coatings, stains and lacquers, and gravure inks. It provides a good balance of properties where economics are of paramount concern. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 68441-17-8. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Adhesives & Sealants. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.5~1%. Certification: REACH. Product Code: PIM000007933. | Australia |
| ACUMIST D-9 | D-9 Micronized Polyethylene Homopolymer for use general purpose solvent borne coatings, stains and lacquers, and gravure inks. It provides a good balance of properties where economics are of paramount concernMostlu used in Gravure inks for slip and rubs. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 68441-17-8. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Adhesives & Sealants. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.5~1%. Certification: REACH. Product Code: PIM000007934. | Australia |
| ACUMIST P-10 | ACUMIST P10 is micronized polypropylene for matting and non-skid or non-slip applications for industrial solvent coatings. Excellent abrasion resistance. Used in Powder Coating for matting and scratch resistance. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 68441-17-8. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Adhesives & Sealants. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.5~1%. Certification: REACH. Product Code: PIM000007935. | Australia |
| AH-2090BA | AH-2090BA is used as a hardener for two-component hardener. It features weather resistance and flexibility. Some of its applications are on heavy duty protective coating, wood, metal, plastic, synthetic leather, adhesive and film coating. Group: Specialty chemicals, paints & coatings. CAS No. 28182-81-2, 123-86-4, 822-06-0. Composition: 1,6-Diisocyanatohexane homopolymer, n-Butyl acetate, Hexamethylene Diisocyanate. Application: CanCoil and Industrial. Function: BINDERS, Polyisocyanates, ADDITIVES, Catalysts - Crosslinkers. Physical Form: Liquid. Certification: PICCS. Product Code: PIM000048238. | Australia |
| AH-4075PX | AH-4075PX is used as a hardener for two-component hardener. It features weather resistance and flexibility. Some of its applications are on heavy duty protective coating, wood, metal, plastic, synthetic leather, adhesive and film coating. Group: Specialty chemicals, paints & coatings. CAS No. 28182-81-2, 1330-20-7, 108-65-6, 822-06-0. Composition: 1,6-Diisocyanatohexane homopolymer, Xylene, Propylene glycol methyl ether acetate, Hexamethylene Diisocyanate. Application: CanCoil and Industrial. Function: BINDERS, Polyisocyanates, ADDITIVES, Catalysts - Crosslinkers. Physical Form: Liquid. Certification: PICCS. Product Code: PIM000048237. | Australia |
| ALBAWHITE 70 | ALBAWHITE 70 is a German madenatural barium sulfate concentrate, ALBAWHITE 70 is a good dispersable extender. ALBAWHITE 70 offers a list of great benefits and properties; as resistant to acids and alkalis, insoluble in water and organic solvents, lightfast and weatherproof, high brightness, colour neutral due to low refractive index, extremely low electrical conductivity, low binder demand & low abrasiveness due to low silica content. ALBAWHITE 70 is suitable for anti-corrosive paints & facade paints, powder coatings, adhesives & sealants, and plastics production. Group: Specialty chemicals, paints & coatings. Composition: Barium sulphate concentrates. Application: Powder Coating, Automotive Paints, Adhesives & Sealants. Function: ADDITIVES, Dispersing Agents. Physical Form: Nano powder. Product Code: PIM000034637. | Australia |
| ALCOGUM L520 | ALCOGUM L520 is a cationic compatible acid swellable rheology modifier supplied at 20% active solids in water. ALCOGUM L520 has been known as synthetic polymers in order to optimise the performance in a broad range of applications. ALCOGUM L520 can be used as a thickener and rheology modifier in industrial cleaning and adhesives. Group: Personal care ingredients, homecare & institutional cleaning. Composition: Synthetic. Application: Institutional Cleaner. Function: Rheology Modifier. Physical Form: Powder. Product Code: PIM000041079. | Australia |
| ANOX 20 POWDER | ANOX 20 is a phenolic antioxidant stabilizer is a high molecular weight hindered phenolic antioxidant that provides very low volatility and excellent resistance to extraction from polymer compounds. ANOX 20 is particularly effective against polymer degradation during long-term aging. It is also very effective as a process stabilizer. ANOX 20 exhibits good resistance to discoloration at the high temperatures that are encountered in thermoplastic polymer processing. Please see the specification sheet below and for further details contact our local sales representative today. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 6683-19-8. Composition: Tetrakismethylene (3,5-di-t-butyl-4-hydroxyhydrocinnamate) methane. Application: Adhesives & Sealants, Thermoplastic Transformers. Function: ADDITIVES, Antioxidants, Stabilisers. Physical Form: Micronized Powder. Product Code: PIM000050175. | Australia |
| ANOX BB011 | ANOX BB011 is a stabilizer blend a family of solid binary synergistic blends used to protect polymers during processing and long-term aging. ANOX BB011 and ANOX BB021 stabilizer blends with a combination of a high molecular weight hindered phenol: ANOX 20 stabilizer, and a phosphite: ALKANOX 240 phosphite, provide excellent protection in polyolefins. The low volatility of the ANOX 20 stabilizer and ALKANOX 240 phosphite allows the blends to be used at relatively high temperatures while providing excellent resistance to extraction from polymer compounds. The blends are active during polymer processing and provide excellent stabilization against thermo-oxidative degradation during long term aging. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 6683-19-8, 31570-04-4. Composition: Benzenepropanoic acid, 3,5-bis(1,1- dimethylethyl)-4-hydroxy-2,2bis[[3- [3,5-bis(1,1-dimethylethyl)-4- hydroxyphenyl]-1-oxo propoxy] methyl]-1,3-propanediyl ester Phenol2,4-bis(1,1dimethylethyl)phosphite (3:1). Application: Adhesives & Sealants. Function: ADDITIVESAntioxidants. Physical Form: Micronized Powder. Product Code: PIM000061930. | Australia |
| ANOX PP18 | ANOX PP18 is a phenolic antioxidant stabiliser, available in both powder and granular form. ANOX PP18 effectively reduces oxidative degradation of most polymeric substances during processing and end-use applications. ANOX PP18 is an excellent stabilizer for polyolefins, impact modified styrenics, block co-polymers, elastomers, adhesives, PVC and polyurethanes. Please see the specification sheet below and for further details contact our local sales representative today. Group: Specialty chemicals, polymers. CAS No. 2082-79-3. Composition: Octadecyl-3-(3,5-di-tert-butyl-4-hydroxyphenyl) propionate. Application: Thermoplastic Transformers. Function: POLYMERSPolyolefins. Physical Form: Solid. Product Code: PIM000060087. | Australia |
| AQUOLIN 163 | AQUOLIN 163 is a water dispersible polyisocyanate based on hexamethylene diisocyanate (HDI). In combination with waterborne polymer dispersions (such as polyurethane, polyacrylate and polyvinyl acetate) and waterborne polyol, it can be used for water-borne coatings and adhesive. Group: Specialty chemicals, paints & coatings. Composition: Polyisocyanate. Application: Printing Inks, Architectural and Deco., Can, Coil and Industrial, Automotive Paints. Function: BINDERS, Polyurethan Dispersions. Physical Form: Liquid. Certification: REACH. Product Code: PIM000007467. | Australia |
| AQUOLIN 268 | AQUOLIN 268 is water dispersible HDI isocyanate, used as curing agents for areas such as textiles, adhesives and industrial coatings, and can also be used as additives to improve the performance of waterborne coatings. Group: Specialty chemicals, paints & coatings. Composition: Hydrophilic aliphatic Polyisocyanate. Application: CanCoil and Industrial. Function: ADDITIVES, Catalysts - crosslinkers. Physical Form: Liquid. Certification: REACH. Product Code: PIM000005644. | Australia |
| AQUOLIN 269 | AQUOLIN 269 is a water dispersible polyisocyanate based on hexamethylene diisocyanate (HDI). In combination with waterborne polyurethane, polyacrylate, etc., it can be used for water-borne coatings and adhesives. After addition of Aquolin ® 269, the ready-to-use mixture must be used within the pot life. Group: Specialty chemicals, paints & coatings. Composition: Polyisocyanate. Application: Printing Inks, Architectural and Deco., Can, Coil and Industrial, Automotive Paints. Function: BINDERS, Polyurethan Dispersions. Physical Form: Liquid. Certification: REACH. Product Code: PIM000007468. | Australia |
| AQUOLIN 270 | AQUOLIN 270 is a water dispersible polyisocyanate based on hexamethylene diisocyanate (HDI). In combination with waterborne polyurethane, polyacrylate, etc., it can be used for water-borne coatings and adhesives. Group: Specialty chemicals, paints & coatings. Composition: Hydrophilic aliphatic Polyisocyanate. Application: Can, Coil and Industrial, Printing Inks, Adhesives & Sealants, Construction, Automotive Paints, Fibers, Textiles & Films. Function: Catalysts - crosslinkers. Physical Form: Liquid. Certification: REACH. Product Code: PIM000008982. | Australia |
| AROMATIC SOLVENT S-100 | AROMATIC SOLVENT S-100 is a colourless & transparent liquid, that can be used in a wide range of applications. Group: Specialty chemicals, electronic & specialties, paints & coatings, polymers. CAS No. Application: Adhesives & Sealants, Printing Inks, Lamination and Converting. Function: SOLVENTSOther. Physical Form: Liquid. Product Code: PIM000049631. | Australia |
| AXIDEW S640 | AXIDEW S640 is an anionic foaming surfactant. Group: Specialty chemicals, electronic & specialties. Composition: Proprietary blend. Application: Adhesives & Sealants. Function: PIGMENTS, TiO2. Physical Form: Liquid. Product Code: PIM000009195. | Australia |
| AXISOL D134 | AXISOL D134 is an ammonium stearate dispersion which is an effective foam stabiliser for frothed latex systems. Group: Specialty chemicals, polymers. Composition: Proprietary blend. Application: Adhesives & Sealants, Automotive Paints, Can, Coil and Industrial, Construction, Fibers, Textiles & Films, Masterbatch & Compounders, Powder Coating, Printing Inks. Function: TiO2. Physical Form: Liquid. Recommended Dosage: 3-10%. Product Code: PIM000009218. | Australia |
| BENAQUA 4000 | BENAQUA 4000 is a rheological additive designed for lower-gloss and matt latex paints, textured and high-build coatings and water-borne adhesives. It is especially useful in systems that are diluted with water prior to use. Group: Specialty chemicals, paints & coatings. Composition: Polymer modified clay. Application: Adhesives & Sealants, Construction, Architectural and Deco. Function: ADDITIVES, Rheology Modifier. Physical Form: Micronized Powder. Product Code: PIM000002111. | Australia |
| BENTONE 27 | BENTONE 27 is a conventional hectorite-based organoclay for high polarity systems, polyol, epoxy, etc. Group: Specialty chemicals, paints & coatings. Composition: Organic derivative of a hectorite-based organoclay. Application: Can, Coil and Industrial, Construction, Printing Inks, Adhesives & Sealants. Function: ADDITIVES, Rheology Modifiers. Physical Form: Micronized Powder. Product Code: PIM000009003. | Australia |
| BENTONE 54 | BENTONE 54 is a conventional organoclay for low to intermediate polarity organic systems. Group: Specialty chemicals, paints & coatings. CAS No. Composition: Organic derivative of a organoclay. Application: Printing Inks, Can, Coil and Industrial, Adhesives & Sealants, Construction, Architectural and Deco. Function: ADDITIVES, Rheology Modifiers. Physical Form: Micronized Powder. Product Code: PIM000009004. | Australia |
| BENTONE® DY | BENTONE® DY is a specialized rheological additive designed for waterborne systems, particularly interior decorative latex paints. This organically modified powdered clay enhances the rheological properties of various applications like adhesives, cementitious systems, emulsion paints, plaster-type compounds, silicate paints, and waterborne epoxy coatings. It acts as an efficient low-shear thickener, imparting stable viscosity and reproducible thixotropic flow without the need for post-thickening. Group: Specialty chemicals, paints & coatings. Composition: Smectite Clay. Application: Architectural and Deco. Function: ADDITIVESRheology Modifiers. Physical Form: Solid. Product Code: PIM000071245. | Australia |
| BENTONE® EW | BENTONE® EW is a rheological additive for water-borne systems. BENTONE® EW additive is a highly beneficiated, easily dispersible powdered smectite clay. Its applications are Adhesives, Ceramic compounds, Ceramic glazes, Corrosion-inhibitive primers, Cosmetics, Crop protection agents, Electrodeposition coatings, Latex paints, Foundry paints/foundry resins (washes), Oil-in-water emulsions, Other water-borne paint systems, Paper coatings, Polishes and cleaners, Welding electrode. Group: Specialty chemicals, paints & coatings. Composition: Organically modified and beneficiated smectite clay. Application: Architectural and Deco., Adhesives & Sealants. Function: ADDITIVESRheology Modifiers. Physical Form: Micronized Powder. Product Code: PIM000000906. | Australia |
| BENZOFLEX 2088 PLASTICIZER | BENZOFLEX 2088 PLASTICIZER is a high solvating plasticiser known for its exceptional performance in PVC, polyvinyl acetate and water-based adhesive systems. It has the application in Flooring, Adhesives/sealants B&C & Vinyl plastisols. It displays excellent wet track, set time and open times and also improve adhesion in acrylic latex caulks. In PVC it serves as a fast fueser, delivering low processing tempertaures and low volatility. Group: Specialty chemicals, paints & coatings. Composition: Benzoate Esters. Application: Adhesives & Sealants, Construction. Function: SOLVENTS, Base Oils & Plasticizers. Physical Form: Liquid. Product Code: PIM000039764. | Australia |
| BENZOFLEX 50 PLASTICIZER | BENZOFLEX 50 PLASTICIZER is known for its exceptional performance in polyvinyl acetate and water-based adhesives. It provides the application in Adhesives/ sealants B&C, Flexible PVC compounds, General industrial coatings, Paints & coatings, Vinyl plastisols. Group: Specialty chemicals, paints & coatings. Composition: Benzoate Esters. Application: Adhesives & Sealants, Construction. Function: SOLVENTS, Base Oils & Plasticizers. Physical Form: Liquid. Product Code: PIM000039765. | Australia |
| BENZOFLEX 9-88 PLASTICIZER | BENZOFLEX 9-88 PLASTICIZER is a high solvating plasticizer that has been used for many years in a wide variety of polymer systems and applications. Its diverse uses include resilient flooring, adhesives, artificial leather cloth and caulk. It has provides the application of Adhesives/sealants-b&c, Automotive, Flooring, Polyurethanes. Group: Specialty chemicals, paints & coatings. Composition: Dipropyleneglycol dibenzoate, Benzoate Esters. Application: Adhesives & Sealants, Construction. Function: SOLVENTS, Base Oils & Plasticizers. Physical Form: Liquid. Product Code: PIM000039775. | Australia |
| BENZOFLEX 9-88 SG PLASTICIZER | BENZOFLEX 9-88 SG PLASTICIZER is a non-phthalate plasticizer specifically designed for 2K polyurethane systems where it is very compatible and efficient. Group: Specialty chemicals, paints & coatings. Composition: Dipropyleneglycol dibenzoate, Benzoate Esters. Application: Adhesives & Sealants. Function: ADDITIVES, Adhesion Promoters, Other. Physical Form: Liquid. Product Code: PIM000039776. | Australia |
| BLANC FIXE F | BLANC FIXE F, manufactured by VENATOR, is a high-quality, synthetic barium sulfate used primarily in the paint and coatings industry. This product is known for its exceptional purity, fine particle size, and excellent dispersibility. It is made from a combination of barium and sulfate, resulting in a product that enhances brightness, color strength, and durability. BLANC FIXE F is also used in plastics, rubber, and ink applications, offering versatility and superior performance. Group: Specialty chemicals, paints & coatings, polymers. Composition: Barium Sulphate. Application: Architectural and Deco., Printing Inks, Thermosets & Composites, Can, Coil and Industrial, Adhesives & Sealants, Powder Coating, Masterbatch & Compounders. Function: PIGMENTS, Other. Physical Form: Micronized Powder. Product Code: PIM000032261. | Australia |
| BLANC FIXE N | BLANC FIXE N, manufactured by VENATOR, is a high-quality, synthetic barium sulfate used extensively in the paints, coatings, and plastics industry. This product is known for its exceptional purity, fine particle size, and excellent dispersibility. BLANC FIXE N is made from a combination of barium and sulfur, offering superior lightfastness and weather stability. It's the perfect choice for those seeking to enhance the brightness and color strength of their products. Group: Specialty chemicals, paints & coatings. CAS No. 7727-43-7. Composition: Barium Sulphate. Application: Adhesives & Sealants, Architectural and Deco., Can, Coil and Industrial, Masterbatch & Compounders, Powder Coating, Printing Inks, Thermosets & Composites. Function: Organic Pigment. Physical Form: Micronized Powder. Product Code: PIM000032260. | Australia |
| BLANOSE CMC 12M31XF | BLANOSE CMC 12M31XF (sodium carboxymethylcellulose, CMC) is an anionic water-soluble polymer that is widely used in toothpastes as a thickener to bind water for the prevention of syneresis and impart desirable flow properties appearance totoothpaste formulations. In addition to toothpaste formulations, cellulose gum is also used in denture adhesive creams and powders to provide hold. Group: Personal care ingredients, cosmetics & toiletries. CAS No. 9004-32-4. Composition: Cellulose. Application: Oral Care. Function: Rheology Modifier. Physical Form: Powder. Certification: Cosmos. INCI Name: Cellulose Gum. Claim: Organic, Natural. Product Code: PIM000004810. | Australia |
| BLANOSE CMC 7H4XF | BLANOSE CMC 7H4XF (sodium carboxymethylcellulose) is an anionic water-soluble polymer that is widely used in toothpastes as a thickener to bind water for the prevention of syneresis and impart desirable flow properties appearance totoothpaste formulations. In addition to toothpaste formulations, cellulose gum is also used in denture adhesive creams and powders to provide hold. Group: Personal care ingredients, cosmetics & toiletries. CAS No. 9004-32-4. Composition: Cellulose. Application: Oral Care. Function: Rheology Modifier. Physical Form: Powder. Certification: Cosmos. INCI Name: Cellulose Gum. Claim: Organic, Natural. Product Code: PIM000004812. | Australia |
| BLANOSE CMC 7HF | BLANOSE CMC 7HF cellulose gum (sodium carboxymethylcellulose) is an anionic water-soluble polymer that is widely used in toothpastes as a thickener to bind water for the prevention of syneresis and impart desirable flow properties appearance totoothpaste formulations. In addition to toothpaste formulations, cellulose gum is also used in denture adhesive creams and powders to provide hold. Cellulose gum is available in wide variety of grades to meet formulation needs. Blanose cellulose gum is derivatized from natural, renewable resources. Group: Personal care ingredients, cosmetics & toiletries. CAS No. 9004-32-4. Composition: Derived Natural. Application: Oral Care. Function: Rheology Modifier. Physical Form: Powder. Certification: Cosmos. INCI Name: Cellulose Gum. Claim: Organic, Natural. Product Code: PIM000004813. | Australia |
| BLANOSE CMC 7HOF | BLANOSE CMC 7HOF cellulose gum (sodium carboxymethylcellulose) is an anionic water-soluble polymer that is widely used in toothpastes as a thickener to bind water for the prevention of syneresis and impart desirable flow properties appearance totoothpaste formulations. In addition to toothpaste formulations, cellulose gum is also used in denture adhesive creams and powders to provide hold. Cellulose gum is available in wide variety of grades to meet formulation needs. Blanose cellulose gum is derivatized from natural, renewable resources. Group: Personal care ingredients, cosmetics & toiletries. CAS No. 9004-32-4. Composition: Cellulose. Application: Oral Care. Physical Form: Powder. INCI Name: Cellulose Gum. Product Code: PIM000004814. | Australia |
| BLANOSE CMC 9H4XF | BLANOSE CMC 9H4XF (sodium carboxymethylcellulose) is an anionic water-soluble polymer that is widely used in toothpastes as a thickener to bind water for the prevention of syneresis and impart desirable flow properties appearance totoothpaste formulations. In addition to toothpaste formulations, cellulose gum is also used in denture adhesive creams and powders to provide hold. Cellulose gum is available in wide variety of grades to meet formulation needs. Blanose cellulose gum is derivatized from natural, renewable resources. Group: Personal care ingredients, cosmetics & toiletries. CAS No. 9004-32-4. Composition: Cellulose. Application: Oral Care. Physical Form: Powder. INCI Name: Cellulose Gum. Product Code: PIM000004816. | Australia |
| BLANOSE CMC 9M31 F | BLANOSE CMC 9M31 F (sodium carboxymethylcellulose) is an anionic water-soluble polymer that is widely used in toothpastes as a thickener to bind water for the prevention of syneresis and impart desirable flow properties appearance totoothpaste formulations. In addition to toothpaste formulations, cellulose gum is also used in denture adhesive creams and powders to provide hold. Cellulose gum is available in wide variety of grades to meet formulation needs. Blanose cellulose gum is derivatized from natural, renewable resources. Group: Personal care ingredients, cosmetics & toiletries. CAS No. 9004-32-4. Composition: Cellulose. Application: Oral Care. Function: Rheology Modifier. Physical Form: Powder. Certification: Cosmos. INCI Name: Sodium Carboxymethylcellulose. Claim: Organic, Natural. Product Code: PIM000004817. | Australia |
| BLANOSE CMC 9M31XF | BLANOSE CMC 9M31XF (sodium carboxymethylcellulose) is an anionic water-soluble polymer that is widely used in toothpastes as a thickener to bind water for the prevention of syneresis and impart desirable flow properties appearance totoothpaste formulations. In addition to toothpaste formulations, cellulose gum is also used in denture adhesive creams and powders to provide hold. Cellulose gum is available in wide variety of grades to meet formulation needs. Blanose cellulose gum is derivatized from natural, renewable resources. Group: Personal care ingredients, cosmetics & toiletries. CAS No. 9004-32-4. Composition: Cellulose. Application: Oral Care. Function: Rheology Modifier. Physical Form: Powder. Certification: Cosmos. INCI Name: Sodium Carboxymethylcellulose. Claim: Organic, Natural. Product Code: PIM000004818. | Australia |
| BLOWN CASTOR OIL | Blown Castor Oil manufactured under thermally controlled conditions in the presence of air to give products with increased viscosities, specific gravities and reactivity's blown castor oil is a golden yellow to honey coloured viscous liquid. Blown Castor Oil is a derivative that has a higher viscosity and specific gravity compared to natural castor oil. Key Function: Binder, solvent. Key Application: Adhesives, Inks, Lubrication, Polish, Caulks and sealants, Leather dressing , Rubber compounding. Group: Specialty chemicals, electronic & specialties, paints & coatings, polymers. CAS No. 68187-84-8. Composition: Ricinus Communis. Application: Rubber & Elastomers, Printing Inks, Adhesives & Sealants, Lubricants. Function: BINDERS, Polyester. Physical Form: Liquid. Product Code: PIM000031963. | Australia |
| BUTVAR® B-72 | BUTVAR® B-72 is a thermoplastic, polyvinyl butyral resin which offers a unique combination of properties for coating or adhesive applications. The use or addition of polyvinyl butyral to a system imparts adhesion, toughness, and flexibility. PVB retains the clarity of the coating and offers reactive hydroxyl sites for crosslinking with thermoset systems. Group: Specialty chemicals, paints & coatings. Composition: No Hazardous Ingredients. Application: Powder Coating, Adhesives & Sealants. Function: ADDITIVES, Adhesion Promoters. Physical Form: Nano powder. Product Code: PIM000039777. | Australia |
| CAB-O-SIL® & CAB-O-SPERSE® | Due to their unique particle characteristics, our hydrophilic fumed silicas provide superior performance benefits for many types of applications, including: Adhesives and sealants, agriculture and lawn care, Chemical mechanical planarization, Coatings, Composites, Food additives, Greases, Pharmaceuticals, Printing and packaging, Silicone sealants, Skin and beauty care products. Uses: We offer a wide portfolio of fumed metal oxide products to meet your performance requirements. Our CAB-O-SIL® fumed silicas are powders that are available with either hydrophobic or hydrophilic surfaces. The versatility of our CAB-O-SIL fumed silicas is due to key product attributes, such as high surface area, surface chemistry, aggregated structure and purity, all of which lead to excellent performance. Group: Fumed Metal Oxides. CAS No. 112945-52-5. Pack Sizes: Loadability Varies. Product ID: CSL. |  |
| Calcium Formate | Calcium Formate is used primarily as an a accelerator in mastic adhesives and the concrete industry, also as an animal feed additive. Grades: Technical and Animal feed. Pack Sizes: MOQ is 1 pallet/1mt - We don't supply in a small quantities. Norkem your first link in the chemical chain. |  Australia |
| Calcium sulphoaluminate cement binder | CSA binder is a hydraulic binder based on calcium aluminate sulfate. The setting time is quicker than Portland cement and it does not release free lime during hydration, decreasing the level of efflorescence. CSA binder accelerates set time and set strength of Portland cement, as well as compensates for shrinkage and adapts the rheology to the application. Uses: CSA Binder can be used self-levelling, self-smoothing, in rapid-hardening screeds, tile adhesives, non-shrink grout, rapid setting mortars and special mortars. It can be used in combination with polymers, defoamers, retarders, accelerators, plasticisers, rheology modifiers and fibres. Group: Drymix accelerator construction. Pack Sizes: 1.1 MT bulk bags. Trading Locations; Sydney, Houston, Dubai, Jakarta, Ho Chi Minh City, Bangkok, Kuala Lumpur and Singapore. |  |
| Cellulose Ether | Cellulose ethers, derived from the natural polymer cellulose, undergo chemical modification to enhance their properties and functionality, serving as versatile additives in various industries. The Bisley cellulose ether range, including MHEC, MHPC, and HEC, offers modified and unmodified grades with diverse applications such as thickening agents, water retainers, and rheology modifiers. In sectors like construction, they improve adhesives, grouts, and leveling compounds, enhancing water retention, workability, and strength. Additionally, in paints and coatings, they serve as effective thickeners, reducing splatter and sedimentation. Trading Locations; Sydney, Houston, Dubai, Jakarta, Ho Chi Minh City, Bangkok, Kuala Lumpur and Singapore. | |
| Cenospheres | Cenospheres, also known as Hollow Ceramic Microspheres, are thin walled hollow ceramic spheres with a diversity of applications. Composed principally of silica and alumina, and sized typically below 300 microns, Cenospheres are characterised by low bulk density, high melting point, high strength, and uniform sphericity. In cementitious systems, sealants, and putties Cenospheres can be used to modify rheology, reduce weight and shrinkage and improve thermal insulation. In composites and other polymer applications, Cenospheres reduce resin demand, and improve impact resistance and strength. Specialised Cenospheres grades are available for rigorous application conditions in Refractories and Surface Coatings. Applications for Cenospheres are numerous. Some of these include Plastics and gel-coats and used in Polyurethane, Latex Emulsions, PVC, Epoxy Resins & Unsaturated Polyester Resins. In the cementitious products sector they are used in dry-mix adhesives, mortars, jointing compounds, and oil-well cements. Trading Locations; Sydney, Houston, Dubai, Jakarta, Ho Chi Minh City, Bangkok, Kuala Lumpur and Singapore. | |
| Cobalt Hydroxide | Cobalt Hydroxide. Applications: Used for rubber adhesives, paint drying agents, lithium-ion battery cathode materials, and ternary battery cathode materials. |  |
Our database is helping our users find suppliers everyday.
