Find where to buy products from Australian suppliers, including: distributors, industrial manufacturers, bulk supplies and wholesalers of raw ingredients & finished goods.
Search for products or services, then visit the suppliers website for prices, SDS or more information. You can also view suppliers in NZ, UK or the USA.
| Product | Description | |
|---|---|---|
| Aloe Vera [200:1] Powder - Fruit & Herbal Powder Extracts (Bulk) | This is a 200:1 powdered aloe which means that to re-constitute it so that it is a single strength Aloe Liquid you need to add only 0.5g of Aloe Powder to 99.5g of Water (0.5% to 99.5%). The Aloe Powder will completely dissolve into water but will not form a gel. This is because the pulverising and powder processing breaks up the complex sugar chains into smaller chain lengths that can no longer form a gel. This does not impact in the performance of the Aloe in your product though as the minerals and moisturising properties remain. To thicken your Aloe Water we recommend adding something like Xanthan Gum, Carrageenan, Hydroxyethyl Cellulose or Carbomer. These thickeners will swell in water to form a gel-like base that can then be used as a facial serum base or just as a soothing Aloe Gel. Otherwise we do sell a ready-made aloe gel. In addition to thickning the Aloe Water the water will also need preserving. We have a range of preservatives available to suit a wide range of ingredient philosophies and product asperations. Use Level: Typically re-constituted at 0.5% in water but can be used at any level between 0.05-5%. Solubility: Fully water soluble with no residue. Forms a colourless, water-thin solution when re-hydrated. Compatibility: Generally compatible with most other actives, can be too salty for some emulsions and can cause creams to become destabilised in some cases. We do recommend stability testing when replacing regular water for reconstituted aloe water in a formula. Please Note: These products are for cosmetic use only and not to be consumed. Group: Extracts. Alternative Names: Aloe Barbadensis Leaf Juice Powder, Aqua. EINECS: 287-390-8, 231-791-2. CAS No. 85507-69-3, 7732-18-5. Pack Sizes: 15G; 100G; 500G; 1KG; 5KG; 20KG and above upon request. Product ID: EXTRALVERPOW. |  Worldwide |
| ALOE VERA EXTRACT 200:1 | Used in sun care and after sun products, hand and body lotions, gels, skin cleansers, powders and talc, shampoos, conditioners, all-in-ones, permanent wave solutions, facial moisturizers, shaving, depilatory preparations, glamour cosmetics, bath powders, anti-dandruff shampoos, styling, sculpting gels, anti-acne preparations, toothpaste and oral rinses. Acts as a soothing and moisturizing agent. Uses: Skin care (Facial care, Facial cleansing, Body care, Baby care, Anti-Acne Products); Toiletries (Shower, Bath, Oral care.); Hair care (Shampoos, Conditioners and Styling). Group: Personal Care; Cosmetic Raw Materials; Extracts; Anti-acne Agents; Conditioning Agents; Soothing Agents; Moisturizing Agents. Alternative Name: Aloe Barbadensis Leaf Juice Powder. Grade: Cosmetics. CAS Number: 94349-62-9. Pack Sizes: 50g, 100g, 250g, 500 grams, 1kg. Similar to: Activera 1-200 Dried Powder (Active Organics, Inc.), Aloe Vera Gel Freeze Dried Powder 200:1 (Mexi Aloe Laboratorios, SA DE CV), Aloe Vera Gel Spray Dried Powder-SC Organic (Concentrated Aloe Corporation (CAC)), Aloe Vera Inner Leaf Spray Dried Powder 100% Organic (Concentrated Aloe Corporation (CAC)), Terra-Pure Certified Spray Dried Aloe Vera Powder 200X (TN001CR) (Terry Laboratories, Inc.). |  Australia & Worldwide |
| hyaluronic acid serum all sizes | Hyaluronic Acid Serum is commonly used in the beauty industry for its benefits in skin health and appearance. It can be used as a base for lotions and serums. This high-strength, high-quality serum contains purified water, phenoxyethanol, pentylene glycol, polyacrylate crosspolymer-6, sodium acetylated hyaluronate, ethylhexylglycerin, sodium hyaluronate, sodium hyaluronate crosspolymer, tert-butanol, and hydrolyzed sodium hyaluronate. The serum base can suspend small amounts of particulates like petals, mica, and exfoliants, allowing for creative three-dimensional serum treatments. A few drops of vegetable carrier or specialty oil, including essential oil, can be suspended in this formula, but it will not emulsify, potentially decreasing clarity. Add antioxidants, soothing, hydration, or microbiome-boosting liquid extracts. It is compatible with AHAs, enhancing their efficacy by delivering them deeper into the skin. Care should be taken with high-strength treatments, keeping AHAs to 1-5% and pH at 3.6-4. Suitable for use with water-soluble vitamins like sodium ascorbyl phosphate (Vitamin C) and B vitamins. Water-soluble botanical powders such as aloe, pineapple, coconut water, manuka honey, and papaya can be mixed in to create a hyaluronic fruit juice. Add a water-soluble color to enhance visual appeal. Mix into a facial cream base to boost rehydration, soften the cream, and deliver a light-touch after fee |  |
| PURALOE 707 PC | Aloe Vera is a consumer-trusted botanical with long-appreciated benefits for skin health and wellness. Group: Personal care ingredients, cosmetics & toiletries. CAS No. 85507-69-3. Composition: Derived Natural. Application: Sun Care, Skin Care. Function: Moisturization, Skin Hydrating, Skin Soothing. Physical Form: Powder. Certification: Halal. INCI Name: Aloe Barbadensis Leaf Juice Powder. Product Code: PIM000010507. |  Australia |
| PURALOE ALOE VERA | PURALOE ALOE VERA is an iconic botanical resource long recognized for its benefits in skin soothing, hydration, and after-sun care. Ashland puraloe offers extremely highly pure, organically certified Aloe vera that is responsibly sourced from Ashland's farms in Mexico. Group: Personal care ingredients, cosmetics & toiletries. CAS No. Composition: Organic Molecule. Application: Sun Care, Baby Care, Skin Care. Function: Active. Physical Form: Powder. INCI Name: Aloe Barbadensis Leaf Juice Powder. Claim: Soothing. Product Code: PIM000004952. | Australia |
| A-C 6 | A-C 6 is a low density polyethylene (LDPE) homopolymer in a prill form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. Can also be partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. Used in cable flooding compounds, along with polybutene. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 9002-88-4. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Adhesives & Sealants. Function: Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.1~2%. Certification: REACH. Product Code: PIM000007910. | Australia |
| A-C® 6A | A-C® 6A is a homopolymer in a powdered form; for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. A-C® 6A can be also partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. Used in cable flooding compounds, along with polybutene. Is used as a dispersing agent in color masterbatch applications. Group: Specialty chemicals, polymers, paints & coatings. CAS No. 9002-88-4. Composition: Low Density Polyethylene. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Powder Coating, Printing Inks. Function: Waxes, Dispersing Agents, POLYMERS, Polystyrene (PS). Physical Form: Micronized Powder. Recommended Dosage: 0.1~2%. Certification: REACH, Food Contact, PICCS. Product Code: PIM000007906. | Australia |
| Barium Carbonate | Barium carbonate is a chemical compound that takes the form of white powder. Itis also known as witherite. Insoluble in water but soluble in most acids (excluding sulphuricacid), it can be produced through one of two manufacturing processes. Grades: Norkem supplies powder, free-flowing powder, high purity powder and granular material along with liquid suspension supplied as 60% 70% w/w solids content. Pack Sizes: MOQ is 1 pallet/1mt - We don't supply in a small quantities. Norkem your first link in the chemical chain. |  Australia |
| beetroot powder all sizes | Beet (Beta vulgaris) roots are famous for their bright vibrant color, earthy flavor, and rich nutritional content. A tasty and healthy addition to your diet, simply add into cereal, smoothies, soups, juices, or any cooking you see fit for a Superfood boost. Beetroot Powder is rich in antioxidants, dietary fiber, calcium, iron, potassium, folate (vitamin B9), and manganese, along with other nutrients. Specifications: Name: Beta Vulgaris, Organic, Ingredients: 100% Beetroot Powder, Country of Origin: China, Allergen Information: May contain traces of bees pollen or traces of peanuts. Pack Sizes: 100g, 400g, 1Kg, 2Kg, 5Kg, 10Kg, 20Kg. Product ID: 1G_ORGANIC_BEETROOT_POWDER. | |
| BROCCOLI SEED EXTRACT | BROCCOLI SEED EXTRACT is a 100% natural, clean label, appear in a yellowish brown powder, native to Italy along the mediterranen coast.It functions as a antioxidant, detoxification, have a strong consumer ingredient recognition, extracted from a sustainable and renewable source.It is recommended to use in healthy blood sugar, immune support, sport nutrition performance & skin care for human health & nutrition applications. For further details, please see the specification sheet below and contact our local sales representative today! Group: Pharmaceutical ingredients, nutraceuticals. CAS No. 223749-36-8. Composition: Brassica Oleracea Italica (Broccoli) Seed Extract. Application: Capsules, Drinks, Oral disperable, Powder. Function: Sports nutrition, Immune System, General Health, Anti-aging / Oxidant / Cancer / Inflammatory. Physical Form: Powder. Product Code: PIM000042764. | Australia |
| LEVONORGESTREL | LEVONORGESTREL is a synthetic progesterone that is used for emergency contraception. Levonorgestrel is also used alone and in combination with estrogens in conventional oral contraceptives. Use of levonorgestrel for emergency contraception has not been associated with serum enzyme elevations or clinically apparent liver injury with jaundice. Group: Pharmaceutical ingredients, animal care. CAS No. 797-63-7. Composition: D- Norgestrel. Application: Animal Health. Function: Fertility Control. Physical Form: Powder. Certification: USP/NF. Product Code: PIM000009551. | Australia |
| LIPOXOL 1500 | LIPOXOL 1500 In film coatings, solid grades of polyethylene glycol can be used alone for the film-coating of tablets or can be useful as hydrophilic polishing materials. Solid grades are also widely used as plasticizers in conjunction with film-forming polymers. The presence of polyethylene glycols in film coats, especially of liquid grades, tends to increase their water permeability and may reduce protection against low pH in enteric-coating films. Polyethylene glycols are useful as plasticizers in microencapsulated products to avoid rupture of the coating film when the microcapsules are compressed into tablets. Group: Pharmaceutical ingredients, excipients. CAS No. 25322-68-3. Composition: Polyethylene Glycol. Application: Oral, Tablets, Pellets, Powder. Function: Plasticizer, Tablet Coating. Physical Form: Flakes. Certification: USP/NF, EP. Product Code: PIM000009558. | Australia |
| LIPOXOL 300 | LIPOXOL 300 In film coatings, solid grades of polyethylene glycol can be used alone for the film-coating of tablets or can be useful as hydrophilic polishing materials. Solid grades are also widely used as plasticizers in conjunction with film-forming polymers. The presence of polyethylene glycols in film coats, especially of liquid grades, tends to increase their water permeability and may reduce protection against low pH in enteric-coating films. Polyethylene glycols are useful as plasticizers in microencapsulated products to avoid rupture of the coating film when the microcapsules are compressed into tablets. Group: Pharmaceutical ingredients, excipients. CAS No. 25322-68-3. Composition: Polyethylene Glycol. Application: Oral, Tablets, Pellets, Powder. Function: Plasticizer, Tablet Coating. Physical Form: Liquid. Certification: USP/NF, EP. Product Code: PIM000009559. | Australia |
| LIPOXOL 3350 | LIPOXOL 3350 In film coatings, solid grades of polyethylene glycol can be used alone for the film-coating of tablets or can be useful as hydrophilic polishing materials. Solid grades are also widely used as plasticizers in conjunction with film-forming polymers. The presence of polyethylene glycols in film coats, especially of liquid grades, tends to increase their water permeability and may reduce protection against low pH in enteric-coating films. Polyethylene glycols are useful as plasticizers in microencapsulated products to avoid rupture of the coating film when the microcapsules are compressed into tablets. Group: Pharmaceutical ingredients, excipients. CAS No. 25322-68-3. Composition: Polyethylene Glycol. Application: Oral, Tablets, Pellets, Powder. Function: Plasticizer, Tablet Coating. Physical Form: Flakes. Certification: USP/NF, EP. Product Code: PIM000009560. | Australia |
| LIPOXOL 6000 | LIPOXOL 6000 in film coatings, solid grades of polyethylene glycol can be used alone for the film-coating of tablets or can be useful as hydrophilic polishing materials. Solid grades are also widely used as plasticizers in conjunction with film-forming polymers. The presence of polyethylene glycols in film coats, especially of liquid grades, tends to increase their water permeability and may reduce protection against low pH in enteric-coating films. Polyethylene glycols are useful as plasticizers in microencapsulated products to avoid rupture of the coating film when the microcapsules are compressed into tablets. Group: Pharmaceutical ingredients, excipients. CAS No. 25322-68-3. Composition: Polyethylene Glycol. Application: Oral, Tablets, Pellets, Powder. Function: Plasticizer. Physical Form: Powder. Certification: USP/NF, EP. Product Code: PIM000009563. | Australia |
| LIPOXOL 8000 | LIPOXOL 8000 in film coatings, solid grades of polyethylene glycol can be used alone for the film-coating of tablets or can be useful as hydrophilic polishing materials. Solid grades are also widely used as plasticizers in conjunction with film-forming polymers. The presence of polyethylene glycols in film coats, especially of liquid grades, tends to increase their water permeability and may reduce protection against low pH in enteric-coating films. Polyethylene glycols are useful as plasticizers in microencapsulated products to avoid rupture of the coating film when the microcapsules are compressed into tablets. Group: Pharmaceutical ingredients, excipients. CAS No. 25322-68-3. Composition: Polyethylene Glycol. Application: Oral, Tablets, Pellets, Powder. Function: Plasticizer. Physical Form: Powder. Certification: USP/NF, EP. Product Code: PIM000009564. | Australia |
| LUNA-FOS 168 | Luna FOS 168 is a solid phosphite antioxidant with excellent hydrolytic stability. Recommendcd for use in combination with amine/phenolic antioxidants, Lunafos 168 functions synergistically to retard oxidative degradation of most polymeric substances during polymerization, processing, and in end-use applications. For those polymers resistant to oxidation, Lunafos 168 can be used alone to maintain optimal color stability. Group: Specialty chemicals, paints & coatings. CAS No. 31570-04-4. Composition: Tris(2, 4-Di-Tert-Butylphenyl) Phosphite. Application: Can, Coil and Industrial, Powder Coating. Function: UV Absorbers, Antioxidants. Physical Form: Micronized Powder. Product Code: PIM000038015. | Australia |
| MAGNESIUM OXIDE EXTRA LIGHT | MAGNESIUM OXIDE EXTRA LIGHT EP/BP is used as an alkaline diluent in solid-dosage forms to modify the pH of tablets. It can be added to solid-dosage forms to bind excess water and keep the granulation dry. In combination with silica, magnesium oxide can be used as an auxiliary glidant. It is also used as a food additive and as an antacid, either alone or in conjunction with aluminum hydroxide. Magnesium oxide is additionally used as an osmotic laxative and a magnesium supplement to treat deficiency states. Group: Pharmaceutical ingredients, excipients. CAS No. 1309-48-4. Composition: Magnesium Oxide. Application: Oral, Tablets, Pellets, Powder. Function: Minerals and nutrients. Physical Form: Powder. Certification: USP/NF, EP. Product Code: PIM000009571. | Australia |
| MAXICUMA® 40% | MAXICUMA® 40% is the first green BioCurcumin A revolutionary curcumin that resolves the challenge of low solubility and bioavailability associated with conventional curcumin. MAXICUMA®. has been developed using pathbreaking - Green technology process with curcuminoids being extracted using 100% Green plant based ethanol. High concentration of curcuminoids alongwith excellent solubility, significantly increases absorption in body leading to high bioavailability and enhanced therapeutic action. Neutral taste makes it very convenient to blend and formulate with multiple formats. MAXICUMA® 40% is recommended to use in tablets, capsules, sachets, premix powders, effervescent tablets, gummies, fortified foods, ready to drink beverage applications. Group: Pharmaceutical ingredients, api, excipients, biopharma. CAS No. 458-37-7. Composition: BioCurcumin. Application: Capsules, Tablets. Function: Anti-inflammatory Agents, Immunological Agents. Physical Form: Micronized Powder. Recommended Dosage: 500 mg per day. Product Code: PIM000069119. | Australia |
| orku chicory root inulin powder supplement all sizes | Orku Inulin Powder is a premium-quality, effective all-natural prebiotic fibre extracted from chicory roots. This naturally sourced fine, white powder with a neutral to slightly sweet taste is odourless and can be easily blended into smoothies, desserts, juice, oatmeal, yogurt, or soups, or you can take it alone with water. It contains 90% pure inulin, with a maximum of 10% naturally occurring sugars, ensuring a high level of dietary fibre. Derived from sustainably sourced chicory roots, it is a natural and environmentally friendly option. Odourless and with a neutral to slightly sweet taste, it is ideal for incorporation into a wide range of foods and beverages without altering flavour profiles. Inulin is recognised as a safe food ingredient with no toxic components. It is GMO Free, Kosher, and Halal, and complies with stringent internationally recognised standards FSSC 22000. Specifications include appearance as a white powder, odourless, and a neutral to slightly sweet taste. Store in a cool, dry place, sealed. Certified according to the standards of the Food Safety System Certification (FSSC) 22000. Pack Sizes: 100g, 400g, 1Kg, 2Kg, 5Kg, 10Kg, 20Kg. Product ID: 1G_CHICORY_INULIN_POWDER. | |
| Pink Australian Clay (Bulk) | Pink Australian Clay has a lower iron content than the red clay hence the lighter colour. This essential minerals to help replenish and regenerate the epidermis of the skin to create softened and conditioned skin with a healthy glow. The clay can be blended with other clays for different properties and effect or used as a stand-alone additive for face and body masks. To form a paste, mix approximately a teaspoon of Pink Australian Clay with 1/3 tsp of water to form a paste. Mix until colour is unform. Due to natural variation this product in its dry powder form may appear to look extremely pale, however when incorporated into formulas or mixed with a liquid the colour develops into a deep pink colour. Whilst mixing with liquid one may notice slight streaking of colour, which is normal, and the product should be mixed until a uniform colour is achieved. Note: In late 2018 the mine extracting the Australian pink clay was closed due to exhausting the natural clay desposits. In order to maintain supply of the same specification product New Directions commenced manufacturing the pink clay from Australian mined kaolin and Iron oxide pigment. This produces a clay with the same characteristics and chemistry and the original product but via a slightly different process. Group: Clay. Alternative Names: Kaolin, Aqua, CI 77491, CI 77499. EINECS: 310-194-1, 231-791-2, 215-168-2, 235-442-5. CAS No. 1332-58-7, 7732-18-5, 1309-37-1, 12227-89-3. Pack Sizes: 100G; 500G; 1KG; 5KG; 20KG and above upon request. Product ID: CLAYAUSTPINK. | Worldwide |
| POLYETHYLENE GLYCOL 400 EP | LIPOXOL 400 In film coatings, solid grades of polyethylene glycol can be used alone for the film-coating of tablets or can be useful as hydrophilic polishing materials. Solid grades are also widely used as plasticizers in conjunction with film-forming polymers. The presence of polyethylene glycols in film coats, especially of liquid grades, tends to increase their water permeability and may reduce protection against low pH in enteric-coating films. Polyethylene glycols are useful as plasticizers in microencapsulated products to avoid rupture of the coating film when the microcapsules are compressed into tablets. Group: Pharmaceutical ingredients, excipients. CAS No. 25322-68-3. Composition: Polyethylene Glycol. Application: Oral, Tablets, Pellets, Powder. Function: Plasticizer, Tablet Coating. Physical Form: Liquid. Certification: USP/NF, EP. Product Code: PIM000009561. | Australia |
| REAX® 260 | REAX® 260 is a high quality, dry powder sulfite sodium lignosulfonate product. Typical applications include: dispersants in textile dyestuffs and agrochemicals along with other industrial formulations. Group: Specialty chemicals, electronic & specialties. CAS No. 8061-51-6. Composition: Lignin sulfonate. Application: Plant & Crop Protection. Function: Dispersing Agents. Physical Form: Solid. Claim: Circularity, Renewable, Bio-Based, Biodegradable. Product Code: PIM000001255. | Australia |
| REAX® 280 | REAX® 280 is a high quality, dry powder sulfite sodium lignosulfonate product. Typical applications include: dispersants in textile dyestuffs and agrochemicals along with other industrial formulations. Group: Specialty chemicals, electronic & specialties. CAS No. 8061-51-6. Composition: Lignin sulfonate. Application: Plant & Crop Protection. Function: Dispersing Agents. Physical Form: Solid. Claim: Bio-Based, Biodegradable, Circularity, Renewable. Product Code: PIM000001256. | Australia |
| SYNOXYL® HSS | SYNOXYL® HSS ia an excellent photostabiliser for Avobenzone. The photostabilizing effect of SYNOXYL® HSS arises from triplet-state energy transfer from avobenzone to Synoxyl® HSS and through light-induced reactions that preserve the main chromophores. It provides in-vivo SPF boosting by 50% for both organic and inorganic sunscreens when alone it has no contribution to SPF. It protects skin by inhibiting up-stream ROS cascade. Easy to use in sunscreen sprays & oils Use of Avobenzone, HMS, OS with Synoxyl® HSS provides cost-effective, broad spectrum high SPF 50+ (critical wavelength of well over 370 nm) sunscreens. Easy to make Octocrylene & Oxybenzone free sunscreens. Group: Personal care ingredients, cosmetics & toiletries. CAS No. 945558-97-4. Composition: Biomolecule/Micro-organismes. Application: Sun Care. Function: Stabilizer, Spf Booster. Physical Form: Powder. Recommended Dosage: 0.5 to 2.5%. INCI Name: Trimethoxybenzylidene Pentanedione. Claim: Antioxidant. Product Code: PIM000002882. | Australia |
| XANTHAN GUM (XG-C200) | XANTHAN GUM (XG-C200) is a high molecular weight polysaccharide gum produced by a pure-culture fermentation of a carbohydrate with strains of Xanthomonas campestris, purified by recovery with ethanol or propan-2-ol, dried and milled. It contains D-glucuronic and D-mannose as the dominant hexose unites, along with D-glucuronic acid and pyruvic acid, and is prepared as the sodium, potassium or calcium salt. Its solutions are neutral. Group: Food & beverage ingredients, beverage & dairy, confectionery & bakery, processed food & food service. Composition: Xanthan Gum (E415). Application: Beverage, Biscuit, Bread, Cakes & Pastries, Frozen Dough, Breakfast Cereals/Bars, Dairy, Desserts & Ice Cream, Dressing, Plant-Based Dairy Alternative, Plant-Based Meat Alternative, Processed Food, Sauces, Soup. Function: Stabilizer & Thickener. Physical Form: Powder. Certification: FSSC, HALAL, JAKIM, MUI, Kosher. Product Code: PIM000067661. | Australia |
| XANTHAN GUM (XG-C80) | XANTHAN GUM (XG-C80) is a high molecular weight polysaccharide gum produced by a pure-culture fermentation of a carbohydrate with strains of Xanthomonas campestris, purified by recovery with ethanol or propan-2-ol, dried and milled. It contains D-glucuronic and D-mannose as the dominant hexose unites, along with D-glucuronic acid and pyruvic acid, and is prepared as the sodium, potassium or calcium salt. Its solutions are neutral. Group: Food & beverage ingredients, beverage & dairy, confectionery & bakery, processed food & food service. Composition: Xanthan Gum (E415). Application: Beverage, Biscuit, Bread, Cakes & Pastries, Frozen Dough, Breakfast Cereals/Bars, Dairy, Desserts & Ice Cream, Dressing, Meals Replacement, Plant-Based Dairy Alternative, Plant-Based Meat Alternative, Processed Food, Sauces, Soup. Function: Stabilizer & Thickener. Physical Form: Powder. Certification: FSSC, HALAL, JAKIM, MUI, Kosher. Product Code: PIM000067662. | Australia |
| ZEAXANTHIN POWDER 5% | ZEAXANTHIN POWDER 5% is an isomer of lutein that coexists in macular region of human eye alongwith lutein. Zeaxanthin is the primary carotenoid within the central macula, whereas lutein dominates in peripheral retina. ZEAXANTHIN POWDER 5% s improved for its solubility, readily dispersible in cold water, imparts visually appealing colour to final formulation, taste masking, good stability profile, suitable for versatile format and easy blending. ZEAXANTHIN POWDER 5% can be used in chewable tablets, sachets, premixes, gummies, jellies, chocolates, dairy, nutrition bars applications. Group: Pharmaceutical ingredients, excipients, biopharma, nutraceuticals. CAS No. 144-68-3. Composition: Zeaxanthin. Application: Tablets. Function: Eye Health. Physical Form: Micronized Powder. Recommended Dosage: 40 mg per day. Product Code: PIM000069164. | Australia |
Our database is helping our users find suppliers everyday.
