Find where to buy products from Australian suppliers, including: distributors, industrial manufacturers, bulk supplies and wholesalers of raw ingredients & finished goods.
Search for products or services, then visit the suppliers website for prices, SDS or more information. You can also view suppliers in NZ, UK or the USA.
| Product | Description | |
|---|---|---|
| Easy Coat Sealer - Gloss Seal | EASY COAT SEALER is a ready-to-use clear and semi viscous acrylic polymer and solvent emulsion formulated to provide economical coverage whilst imparting a lasting protective seal to most hard and/or porous surfaces. NOTE: This product is highly flammable and should be used & stored away from ALL sources of flame or ignition. Typical coverage is between 12 to 20 m2 per litre. Prior to application of EASY COAT SEALER it is vital to thoroughly clean the surface using an approved Able Westchem detergent and allow overnight to dry. Also if previous coatings have been applied these must be removed using the appropriate Able Westchem stripper (AC800). EASY COAT SEALER should only be applied to clean dry surface. For most applications two coats is normally sufficient leaving at least an hour between coats, however, some surfaces may require further coats to provide an impervious coating. EASY COAT SEALER should normally be applied using a lambs wool applicator or roller, or good quality paintbrush. Spray applications are not recommended because of fire risk however this product is compatible with this method of application otherwise. EASY COAT SEALER is NOT suitable for use on vinyl, cork, linoleum or timber surfaces. EASY COAT SEALER should only be applied to surfaces with temperatures between 10-30 degrees Celsius with moisture content between 5 -15%. A moisture meter is recommended to indicate curing conditions. Airflow is required to aid the drying process however too much air flow can cause the coating to dry too quickly. Pack Sizes: 5 Litre, 20 Litres, 205 Litre Drums. Product ID: WC1053. Chemicals By Industry, Universal Products. |  Australia Wide |
| Epoxy & Two Pack Stripper | EPOXY & TWO PACK STRIPPER - AC805 is a viscous mobile solvent gel formulated to remove carbon, rubber, resin, paint and varnish from bricks, stone and metal surfaces, including ferrous metals and alloys. This product has a limited shelf life on the gelling component. Apply a liberal amount of AC805 directly onto the surface with a paint brush. Allow 10-15 minutes contact time for the product to penetrate and soften the coating. Finally, clean the surface by scraping or hosing off with water. Dry the surface and apply as before. Pack Sizes: 5 Litre, 20 Litres. Product ID: AC805. Chemicals By Industry, Brick & Concrete Cleaning, Chemicals By Industry, Building & Construction, Chemicals By Industry, Marine. | Australia Wide |
| Graffiti Remover & Paint Stripper | GRAFFITI REMOVER & PAINT STRIPPER - AC800 is a viscous mobile solvent gel formulated to remove carbon, rubber, resin, paint and varnish from bricks, stone and metal surfaces, including ferrous metals and alloys. Apply a liberal amount of AC800 directly onto the surface with a paint brush. Allow 10-15 minutes contact time for the product to penetrate and soften the coating. Finally, clean the surface by scraping or hosing off with water. Some stubborn coatings and residue films may require a second application of AC800. Dry the surface and apply as before. Pack Sizes: 5 Litre, 20 Litres, 205 Litre Drums. Product ID: AC800. Chemicals By Industry, Brick & Concrete Cleaning, Chemicals By Industry, Building & Construction. | Australia Wide |
| Hook & CIP Cleaner | HOOK & CIP CLEANER is a high alkaline surfactant based concentrate used for the efficient stripping of fats, protein, carbon, and miscellaneous organic build-up from steel and plastic in food processing areas. SOAK OR DIP TANKS (Hooks & Gambrels). Dilute: At the ratio of 1 part product to 10 parts water in soak bath. Can be used in cold bath but overall performs will be better if the bath is heated to 70-80C. TIP: As the contamination within the bath increases extra product will need to be periodically added to offset fat build-up. Excessive contamination will require a complete change of dilution bath.Once surface is clean flush clean with copious amounts of potable water. SMOKE HOUSES. Spray, Foam, Circulate or Brush on with hot water at ratio of 2% to 8% v/v. Agitate and allow 5 to 10 minutes dwell time. Once surface is clean flush clean with copious amounts of potable water. Pack Sizes: 5 Litre, 20 Litres, 205 Litre Drums. Product ID: WC650. Chemicals By Industry, Abattoir, Chemicals By Industry, Food & Beverage Processing. | Australia Wide |
| POWEROIL® OPAL M-150 | POWEROIL OPAL M-150 is a processing oil formulated from carefully selected Severely Hydro treated Heavy Paraffinic Oil. POWEROIL OPAL M-150 appear as a clear liquid, it is a high-quality lubricants to use in a wide range of applications: Manufacturing of Thermoplastic Compounds (SBCs, TPV-& TPOs), Manufacturing of Automotive components, Extruded Profiles, Manufacturing of Tube, Hoses, and Weather strips, Manufacturing of electronics handles, Toothbrush Grips, Light coloured non-black Foot Wear products, molded products. Group: Specialty chemicals, electronic & specialties, polymers. CAS No. 64742- 53- 6, 64742- 55- 8. Composition: Hydrotreated light naphthenic distillate, Distillates, petroleum, hydrotreated light paraffinic. Application: Thermoplastic Transformers, Masterbatch & Compounders. Physical Form: Liquid. Product Code: PIM000031746. |  Australia |
Our database is helping our users find suppliers everyday.
