Clear Coating Suppliers Australia
Find where to buy products from Australian suppliers, including: distributors, industrial manufacturers, bulk supplies and wholesalers of raw ingredients & finished goods.
Search for products or services, then visit the suppliers website for prices, SDS or more information. You can also view suppliers in NZ, UK or the USA.
Product | Description | |
---|---|---|
Dewaxed White Shellac Quick enquiry Where to buy Suppliers range | Natural shellac is bleached and the wax completely removed. Dewaxed white shellac is in powder form and can be used as a sanding sealer, wood grain filler, near clear french polish and food coating applications. Uses: Wood work, luthiers, food coating, sanding sealer. Pack Sizes: 25kgs, 1kg, 250gm. Categories: Shellac, Resin glaze and wood finishes. | AUSTRALIA, NEW ZEALAND |
Easy Coat Sealer - Gloss Seal Quick enquiry Where to buy Suppliers range | EASY COAT SEALER is a ready-to-use clear and semi viscous acrylic polymer and solvent emulsion formulated to provide economical coverage whilst imparting a lasting protective seal to most hard and/or porous surfaces. NOTE: This product is highly flammable and should be used & stored away from ALL sources of flame or ignition. Typical coverage is between 12 to 20 m2 per litre. Prior to application of EASY COAT SEALER it is vital to thoroughly clean the surface using an approved Able Westchem detergent and allow overnight to dry. Also if previous coatings have been applied these must be removed using the appropriate Able Westchem stripper (AC800). EASY COAT SEALER should only be applied to clean dry surface. For most applications two coats is normally sufficient leaving at least an hour between coats, however, some surfaces may require further coats to provide an impervious coating. EASY COAT SEALER should normally be applied using a lambs wool applicator or roller, or good quality paintbrush. Spray applications are not recommended because of fire risk however this product is compatible with this method of application otherwise. EASY COAT SEALER is NOT suitable for use on vinyl, cork, linoleum or timber surfaces. EASY COAT SEALER should only be applied to surfaces with temperatures between 10-30 degrees Celsius with moisture content between 5 -15%. A moisture meter is recommended to indicate curing conditions. Airflow is required to aid the drying process however too much air flow can cause the coating to dry too quickly. Pack Sizes: 5 Litre, 20 Litres, 205 Litre Drums. Product ID: WC1053. Chemicals By Industry, Universal Products. | Australia Wide |
Sanvert - Rust Converter & Passivator Quick enquiry Where to buy Suppliers range | SANVERT is clear mobile liquid which when applied to rust or bore stains removes the rust and leaves a protective coating when rinsed off with fresh water (inhibited). SANVERT can be used for the removal of rust stains on fishing boats, ships, platforms, trailers, marine equipment, blending and mixing tanks, metal tools etc. SANVERT can also be used as a porcelain and tile cleaner to remove hard water scales. Spray neat directly onto affected areas. Apply with brush to more severely affected areas. Leave it on for 10 to 15 minutes. Wash off with pressure hose. SANVERT will quickly remove surface rust stains and convert the residual rust into a protective phosphate coating. Once the surface is dry, a primer and/or overcoat/s can be applied if required. Pack Sizes: 5 Litre, 20 Litres, 205 Litre Drums. Product ID: SC830. Chemicals By Industry, Marine, Chemicals By Industry, Workshop. | Australia Wide |