Find where to buy products from Australian suppliers, including: distributors, industrial manufacturers, bulk supplies and wholesalers of raw ingredients & finished goods.
Search for products or services, then visit the suppliers website for prices, SDS or more information. You can also view suppliers in NZ, UK or the USA.
| Product | Description | |
|---|---|---|
| Phosclean Descaler | PHOSCLEAN is an AQIS compliant CIP acid cleaner specifically designed for the removal of scale, rust & precipitates from lines and equipment & tanks in food, beverage & dairy industries. RUST CONVERSION (Metal Priming & Preparation). Remove oil, grease & loose scale with a free rinsing water based alkaline degreaser such as PREDATOR, TRIPLE 2 or ... STAIN REMOVING & GENERAL CLEANING. Dilute up to 1:10 with warm water, however a dilution of 1:4 is recommended for most applications. Apply diluted PHOSCLEAN & allow a few minutes to work & then wipe or hose off. Do not allow to dry. Deeply encrusted stains may need further applications & some slight agitation with a brush or light sourer to promote penetration. Remember to keep the surface wet with product & do not allow to dry as process will halt. TIP: Always pre test an inconspicuous test area before tackling your job. CIP CLEANING. Pre wash using AQIS Alkaline Detergent such as AC222 or Hercules then flush. Then use PHOSCLEAN at a dilution to suit your requiremts (from neat to 1:100). TIP: Always allow up to 5 minutes of contact time to dissolve scale & precipitates. Always rinse food contact surfaces with potable water after use. Always pH adjust waste water to pH 7 with sodium hydroxide before release/ disposal. SITUATIONS TO AVOID IN USE. Avoid contact with Sodium Hypochlorite solutions (bleach), colorbond, anti-fouling paint, marble, anodised or galvanised surfaces & aluminium. Always pre test an inconspicuous test area before tackling your job. Pack Sizes: 5 Litre, 20 Litres, 205 Litre Drums. Product ID: WC861. Chemicals By Industry, Building & Construction, Chemicals By Industry, Food & Beverage Processing, Chemicals By Industry, Hospitality, Chemicals By Industry, Janitorial & Maintenance, Chemicals By Industry, Kitchen, Chemicals By Industry, Marine, Chemicals By Industry, Mining, Chemicals By Industry, Workshop. |  Australia Wide |
| Quake 160 - Produce Sanitiser | QUAKE 160 is peracetic acid (C2H4O3)) is a mixture of acetic acid (CH3COOH) and hydrogen peroxide (H2O2) in solution which finds widespread use and is a cost effective NO RINSE sanitising solution in breweries, dairy farms, food processing & commercial laundries. QUAKE 160 is also excellent at removing the green coloured vanadium stains from bricks and pavers when mixed with equal parts water and applied for 2-5 minutes then washed off. FRUIT & VEGATABLE WASHING. Ideal for sanitising lettuce, rocket, mushrooms, celery, pineapples, tomatoes, apples, broccoli, beans, squash, rockmellons, legumes, brussels and bok choy - achieving excellent plate counts (when Pre Dip & Final Dip each for 30 seconds @ 50ppm then spin for 30 seconds). Pre dip 30 Seconds @ concentration of 30ppm to 50ppm. Final Dip for 30 Seconds at concentration of 30 to 80ppm. CLEANING VANADIUM STAINS OFF BRICKS. Use 1 part Quake to 4 parts water. GENERAL SANITISING. Quake 160 is formulated to be used on pre-cleaned surfaces that contain no detergents or surfactants. To achieve 200 ppm (maximum allowable by AQIS) add 4ml to 1 litre of warm water. The following table summarizes the approximate ppm for a given dilution. Dilution Peracetic acid (ppm). 1:10 5,000. 1:100 500. 1:250 200. 1:375 150. 1:500 100. Pack Sizes: 5 Litre, 20 Litres. Product ID: WC78. Chemicals By Industry, Food & Beverage Processing. | Australia Wide |
| Peroxy Acetic Acid - Proxitane | PEROXY ACETIC ACID (Peracetic acid (C2H4O3)) is a mixture of acetic acid (CH3COOH) and hydrogen peroxide (H2O2) in solution which finds widespread use a cost effective NO RINSE sanitising solution in breweries, dairy farms, food processing & commercial laundries. PEROXY ACETIC ACID is formulated to be used on pre-cleaned surfaces that contain no detergents or surfactants. The products performance will be dramatically reduced if soils are present on the surface such as fats, oil, starches or vegetable matter. Peroxyacetic acid sanitation is most efficient at pH's below 7. The pH of a 1: 100 dilution of this product is about 3.0 and a 1: 500 dilution about ph 4.0. Temperature plays a factor in effectiveness of this product, for example at a temperature of 15°C and a pH value of 7, five times more peractetic acid is required to effectively deactivate pathogens than at a pH value of 7 and a temperature of 35°C. Therefore working solutions should be ambient to warm (25 to 40°C). Exact dilution rates are determined on a case by case basis and Able Westchem does not normally determine what rate suits its customers requirements. To achieve 200 ppm (maximum allowable by AQIS) add 4ml to 1 litre of warm water. The following table summarizes the approximate ppm for a given dilution. Dilution Peracetic acid (ppm). 1:10 5,000. 1:100 500. 1:250 200. 1:375 150. 1:500 100. Pack Sizes: 5 Litre, 20 Litres, 200 Litre, 1000 Litres. Product ID: WC77. Chemicals By Industry, Abattoir, Chemicals By Industry, Brewing\, Distillery & Winery, Chemicals By Industry, Food & Beverage Processing. | Australia Wide |
| Westguard - Sanitising Spray & Wipe | WESTGUARD is an AQIS compliant food area cleaner sanitiser for killing 99.9% of germs and bugs. WESTGUARD contains biodegradable surfactant/s as well as a high level of active sanitation that is afforded by Alkyl dimethyl benzyl ammonium chloride. WESTGUARD is also accepted by the Australian Commonwealth Department of Primary Industry as a detergent/ sanitiser for use in meat export establishments. WESTGUARD is designed as an economical product that can be used on floors, walls, ceilings, foot dips and equipment. WESTGUARD is ideal for use in many industries that include; Marine, Dairy, Poultry, Primary Production, Cold Storage, Meat Processing, Hospitality and Food Preparation. WESTGUARD is effective in hard or soft water and works well in both cold and hot water. The use of hot water will increase the effectiveness of the surfactant/s by orders of magnitude (generally as hot as the hand can stand). Spray, mop, swab, or soak surfaces. Note: the greater the contact time with surfaces the greater the kill.. Rinsing is not normally necessary apart from when a surface is particularly greasy, is going to be polished or when used in a food processing area (i.e. product contains surfactant/s that may foam and taste bitter). Treated surfaces in food prep and processing areas should be rinsed with clean water. Heavy soiling 1:10 (100ml per Litre) with water Light to Medium Soiling 1:50 (20mls per Litre) with water. Pack Sizes: 5 Litre, 20 Litres, 205 Litre Drums. Product ID: WC1200. Chemicals By Industry, Hospitality. | Australia Wide |
| XIAMETER AFE-0100 FG | XIAMETER AFE-0100 FG 30% active, food-grade silicone emulsion designed to control foam in aqueous systems. Useful in industrial and food grade applications. Recommended applications include food fermentation operations, brine applications, vegetable processing, high sugar-containing products, and carpet cleaning. Group: Food & beverage ingredients, confectionery & bakery, processed food & food service, food supplements & nutrition, beverage & dairy. CAS No. 556- 67- 2. Composition: Octamethylcyclotetrasiloxane. Application: Sweet Snack, Fruit & Vegetables. Function: Foaming agent, Emulsifier. Physical Form: Liquid. Certification: Halal, JAKIM, MUI, Kosher, FSSC. Product Code: PIM000017093. |  Australia |
Our database is helping our users find suppliers everyday.
