Find where to buy products from Australian suppliers, including: distributors, industrial manufacturers, bulk supplies and wholesalers of raw ingredients & finished goods.
Search for products or services, then visit the suppliers website for prices, SDS or more information. You can also view suppliers in NZ, UK or the USA.
| Product | Description | |
|---|---|---|
| Easy Coat Sealer - Gloss Seal | EASY COAT SEALER is a ready-to-use clear and semi viscous acrylic polymer and solvent emulsion formulated to provide economical coverage whilst imparting a lasting protective seal to most hard and/or porous surfaces. NOTE: This product is highly flammable and should be used & stored away from ALL sources of flame or ignition. Typical coverage is between 12 to 20 m2 per litre. Prior to application of EASY COAT SEALER it is vital to thoroughly clean the surface using an approved Able Westchem detergent and allow overnight to dry. Also if previous coatings have been applied these must be removed using the appropriate Able Westchem stripper (AC800). EASY COAT SEALER should only be applied to clean dry surface. For most applications two coats is normally sufficient leaving at least an hour between coats, however, some surfaces may require further coats to provide an impervious coating. EASY COAT SEALER should normally be applied using a lambs wool applicator or roller, or good quality paintbrush. Spray applications are not recommended because of fire risk however this product is compatible with this method of application otherwise. EASY COAT SEALER is NOT suitable for use on vinyl, cork, linoleum or timber surfaces. EASY COAT SEALER should only be applied to surfaces with temperatures between 10-30 degrees Celsius with moisture content between 5 -15%. A moisture meter is recommended to indicate curing conditions. Airflow is required to aid the drying process however too much air flow can cause the coating to dry too quickly. Pack Sizes: 5 Litre, 20 Litres, 205 Litre Drums. Product ID: WC1053. Chemicals By Industry, Universal Products. |  Australia Wide |
| SUDAN® BLUE 673NF | SUDAN® BLUE 673NF is a dye appears in a free-flowing dark blue liquid with a distinct aromatic odour. It is not miscible with water. SUDAN® BLUE 673NF is commonly used for the colouration of petroleum products, mineral oils, aliphatic and aromatic hydrocarbon solvents and fuels. SUDAN® BLUE 673NF can be readily pumped, poured or metered directly from the container. Group: Specialty chemicals, electronic & specialties. CAS No. 90170-70-0. Composition: 9, 10-Anthracenedione, 1, 4-diamino-, N, N'-mixed 2-ethylhexyl and 3-[(2-ethylhexyl)oxy]propyl and 3-methoxypropyl derivs. (SOLVENT BLUE 79B). Application: Fine chemicals & Custom Synt. Function: ADDITIVES, Other. Physical Form: Liquid. Product Code: PIM000040659. |  Australia |
| SUDAN® GREEN 988 | SUDAN® GREEN 988 is a dye appears in a free-flowing dark green liquid with a distinct aromatic odour. It is not miscible with water. SUDAN® GREEN 988 is commonly used for the colouration of petroleum products, mineral oils, aliphatic and aromatic hydrocarbon solvents and fuels. The product can be readily pumped, poured or metered directly from the container. Group: Specialty chemicals, electronic & specialties. CAS No. 64742-94-5. Composition: Reaction mass of 2, 4-bis(xylylazo)resorcinol and 2, 4-bis[(4-dodecylphenyl)azo]resorcinol and 2-[(4-dodecylphenyl)azo]-4-(2, 4-xylylazo)resorcinol (SOLVENT YELLOW 175). Application: Fine chemicals & Custom Synt. Function: ADDITIVES, Other. Physical Form: Liquid. Product Code: PIM000040660. | Australia |
| SUDAN® M RED 462 | SUDAN® M RED 462 is a dye appears in a free-flowing dark red/pink liquid with a distinct aromatic odour. It is not miscible with water. SUDAN® M RED 462 is commonly used for the colouration of petroleum products, mineral oils, aliphatic and aromatic hydrocarbon solvents and fuels. The product can be readily pumped, poured or metered directly from the container. Group: Specialty chemicals, electronic & specialties. CAS No. 56358-09-9. Composition: N- (2-ethylhexyl) -1-[[2-methyl-4-[ (2-methylphenyl) azo]phenyl]azo]naphthalen-2-amine (SOLVENT RED 19E). Application: Fine chemicals & Custom Synt. Function: ADDITIVES, Other. Physical Form: Liquid. Product Code: PIM000040661. | Australia |
| SUDAN® YELLOW 177NF | SUDAN® YELLOW 177NF is a dye appears in a free-flowing dark amber liquid with a distinct aromatic odour. It is not miscible with water. SUDAN® YELLOW 177NF is commonly used for the colouration of petroleum products, mineral oils, aliphatic and aromatic hydrocarbon solvents and fuels. The product can be readily pumped, poured or metered directly from the container. Group: Specialty chemicals, electronic & specialties. CAS No. 1189173-42-9. Composition: Reaction mass of 2, 4-bis(xylylazo)resorcinol and 2, 4-bis[(4-dodecylphenyl)azo]resorcinol and 2-[(4-dodecylphenyl)azo]-4-(2, 4-xylylazo)resorcinol (SOLVENT YELLOW 175). Application: Fine chemicals & Custom Synt. Function: ADDITIVES, Other. Physical Form: Liquid. Product Code: PIM000040662. | Australia |
Our database is helping our users find suppliers everyday.
