Find where to buy products from Australian suppliers, including: distributors, industrial manufacturers, bulk supplies and wholesalers of raw ingredients & finished goods.
Search for products or services, then visit the suppliers website for prices, SDS or more information. You can also view suppliers in NZ, UK or the USA.
| Product | Description | |
|---|---|---|
| LDPE (LOW-DENSITY POLYETHYLENE) | Low Density Polyethylene Main Uses: Plastic. Other Names: LDPE, Polyethylene. Cas No. 9002-88-4. Chemical Category: Plastic. PACK SIZES AVAILABLE: 25kg to Bulk amounts |  Australia Wide, offices in Sydney & Melbourne |
| LLDPE (LINEAR LOW-DENSITY POLYETHYLENE) | Linear Low Density Polyethylene Main Uses: Plastic. Other Names: LLDPE, Polyethylene. Cas No. 9002-88-4. Chemical Category: Plastic. PACK SIZES AVAILABLE: 25kg to Bulk amounts | Australia Wide, offices in Sydney & Melbourne |
| A-C® 1702 | A-C® 1702 is grease like, low temperature, completely amorphous, low density polyethylene (PE) homopolymer for use in solvent borne coatings, heat set, sheet fed solvent borne inks, and specialty digital and UV/EB inks to provide mar and rub resistance by lowering the coefficient of friction. Also used in lubricants to provide release. Will act as a plasticizer in paraffin based candles, especially large volume candles, to resist cracking. Group: Specialty chemicals, polymers. CAS No. 9002-88-4. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.1~2%. Certification: REACH. Product Code: PIM000007932. |  Australia |
| A-C 316 | A-C 316 is a hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion resistance by lowering the coefficient of friction. In textiles, this can help improve sewability and fabric cutting, helping to extend cutting machine lifetime. Its acid number of 16 allows it to be emulsified into water. Can also provide heat resistance to hot melt adhesives (HMAs). In addition, may be used as a metal release agent for PVC processing and is a fusion control for PVC formulations. It will not affect clarity in transparent PVC applications. Very effective for use in processing PVC regrind. Group: Specialty chemicals, polymers. CAS No. 9002-88-4. Composition: OPE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.1~2%. Certification: REACH, Food Contact. Product Code: PIM000007937. | Australia |
| A-C 325 | A-C 325 is a hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion resistance by lowering the coefficient of friction. In textiles, this can help improve sewability and fabric cutting, extending cutting machine lifetime. Its acid number of 25 allows it to be emulsified into water. Can also provide heat resistance to hot melt adhesives (HMAs). Group: Specialty chemicals, polymers. CAS No. 68441-17-8. Composition: OPE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007915. | Australia |
| A-C 330 | A-C 330 is a hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion resistance by lowering the coefficient of friction. In textiles, can help improve sewability and fabric cutting, extending cutting machine lifetime. Its acid number is 30, which allows it to be emulsified into water. Can also provide heat resistance to hot melt adhesives (HMAs). Group: Specialty chemicals, polymers, paints & coatings. CAS No. 68441-17-8. Composition: OPE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Can, Coil and Industrial. Function: Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007921. | Australia |
| A-C® 3325 | A-C® 3325 is a hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion resistance by lowering the coefficient of friction. In textiles, this can help improve sewability and fabric cutting, extending cutting machine lifetime. Its acid number of 25 allows it to be emulsified into water. Can also provide heat resistance to hot melt adhesives (HMAs). Group: Specialty chemicals, polymers. CAS No. 68441-17-8. Composition: OPE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007925. | Australia |
| A-C® 3330 | A-C® 3330 is hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion resistance by lowering the coefficient of friction. In textiles, can help improve sewability and fabric cutting, extending cutting machine lifetime. Its acid number is 30, which allows it to be emulsified into water. Can also provide heat resistance to hot melt adhesives (HMAs). Group: Specialty chemicals, polymers. CAS No. 68441-17-8. Composition: OPE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007926. | Australia |
| A-C 392 | A-C 392 is hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion resistance by lowering the coefficient of friction. In textiles, can help improve sewability and fabric cutting, extending cutting machine lifetime. Its acid number of 30 allows it to be emulsified into water. Can also provide heat resistance to hot melt adhesives (HMAs). Additionally, it is an effective metal release agent for cellular PVC applications. Group: Specialty chemicals, polymers. CAS No. 68441-17-8. Composition: OPE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.3~0.5%. Certification: REACH. Product Code: PIM000007923. | Australia |
| A-C 6 | A-C 6 is a low density polyethylene (LDPE) homopolymer in a prill form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. Can also be partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. Used in cable flooding compounds, along with polybutene. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 9002-88-4. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Adhesives & Sealants. Function: Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.1~2%. Certification: REACH. Product Code: PIM000007910. | Australia |
| A-C® 617 | A-C® 617 is a low density polyethylene (LDPE) homopolymer in a prill form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. Can also be partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. Is used as a dispersing agent in color masterbatch applications. In PVC applications it finds use as an external lubricant. Group: Specialty chemicals, polymers. Composition: EVA WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007918. | Australia |
| A-C® 617A | A-C® 617A is a low density polyethylene (LDPE) homopolymer in a powdered form. A-C® 617A displays the function in improving surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. A-C® 617A can also be partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. In PVC applications it finds use as an external lubricant. Group: Specialty chemicals, polymers. CAS No. 9002-88-4. Composition: Low Density Polyethylene. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Thermoplastic Transformers. Function: Waxes, POLYMERS, PVC. Physical Form: Micronized Powder. Recommended Dosage: 1.0%. Certification: REACH. Product Code: PIM000007913. | Australia |
| A-C 629 | A-C 629 is a low density Oxidized Polyethylene (LDOxPE) homopolymer in prill form for use in solvent borne coatings as a rheological aid. It also finds use as a metal release agent in PVC. It can also be atmospherically emulsified for use in aqueous applications, such as textiles, lubricants, coatings and inks, to lower the COF and provide surface properties such as mar & abrasion resistance and increased slip. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 68441-17-8. Composition: OPE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Others. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007914. | Australia |
| A-C® 629A | A-C® 629A is a Low density Oxidized Polyethylene (LDOxPE) homopolymer in prill form for use in solvent borne coatings as a rheological aid. It also finds use as a metal release agent in PVC. It is a pigment dispersing agent for color masterbatch. A-C® 629A can also be atmospherically emulsified for use in aqueous applications, such as textiles, lubricants, coatings and inks, to lower the COF and provide surface properties such as mar & abrasion resistance and increased slip. Group: Specialty chemicals, polymers. CAS No. 68441-17-8. Composition: Low Density Oxidized Polyethylene. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: Waxes, Dispersing Agents. Physical Form: Solid. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007905. | Australia |
| A-C 680 | A-C 680 is low density Oxidized Polyethylene (LDOxPE) homopolymer in prill form for use in solvent borne coatings as a rheological aid. It can also be atmospherically emulsified for use in aqueous applications, such as textiles, lubricants, coatings and inks, to lower the COF and provide surface properties such as mar &, abrasion resistance and increased slip. It can also be used as an anti transpirant coating to delay fruit spoilage allowing longer storage and transport times. It also finds use as a metal release agent in PVC. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 68441-17-8. Composition: OPE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Others. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 2.0%. Certification: REACH. Product Code: PIM000007927. | Australia |
| A-C® 6A | A-C® 6A is a homopolymer in a powdered form; for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. A-C® 6A can be also partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. Used in cable flooding compounds, along with polybutene. Is used as a dispersing agent in color masterbatch applications. Group: Specialty chemicals, polymers, paints & coatings. CAS No. 9002-88-4. Composition: Low Density Polyethylene. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Powder Coating, Printing Inks. Function: Waxes, Dispersing Agents, POLYMERS, Polystyrene (PS). Physical Form: Micronized Powder. Recommended Dosage: 0.1~2%. Certification: REACH, Food Contact, PICCS. Product Code: PIM000007906. | Australia |
| A-C 8 | A-C 8 is low density polyethylene (LDPE) homopolymer in a prill form, for use in solvent borne coatings, heatset and liquid solvent borne inks,to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. Can also be partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. Group: Specialty chemicals, polymers. CAS No. 9002-88-4. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.5%. Certification: REACH. Product Code: PIM000007922. | Australia |
| A-C® 9A | A-C® 9A is low density polyethylene (LDPE) homopolymer in a powdered form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. Can also be partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. Best choice in cable filling compounds to prevent oil bleed at high temperatures. Is used as a dispersing agent in color masterbatch applications. Group: Specialty chemicals, polymers. CAS No. 9002-88-4. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.1~2%. Certification: REACH. Product Code: PIM000007929. | Australia |
| A-C POLYETHYLENE WAXES | POLYETHYLENE WAXES is low density polyethylene (LDPE) homopolymer in a powdered form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF(Coefficient of Friction). It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs (Hot Melt Adhesives). Can also be partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. In PVC applications it finds use as an external lubricant. Main application is in lip care, eye makeup & hair wax. Group: Personal care ingredients, cosmetics & toiletries. CAS No. 9002-88-4. Composition: Natural derived. Application: Color Care, Hair Care. Physical Form: Powder. INCI Name: Polyethylene. Product Code: PIM000027995. | Australia |
| FINE-BLEND CMG5804 | FINE-BLEND CMG5804 is a maleic anhydride grafted polymer. The base polymer is high density polyethylene, and it has white or light yellow particle appearance. FINE-BLEND CMG5804 can be used in low-smoke halogen-free flame-retardant wire and cable system and wood plastics composite (WPC) system as compitibilizer which can improve the properties of matrix material. Group: Specialty chemicals, polymers. Composition: PE-g-MAH. Application: Masterbatch & Compounders. Function: ADDITIVES, Dispersing Agents. Physical Form: Solid. Product Code: PIM000005688. | Australia |
| HONEYWELL A-C® 20A | HONEYWELL A-C® 20A is used in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. Can also be partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. Used in cable flooding compounds, along with polybutene. Group: Specialty chemicals, polymers. CAS No. 12003-38-2, 18282-10-5, 13463-67-15. Composition: Low Density Polyethylene. Application: Masterbatch & Compounders. Function: POLYMERS, Other. Physical Form: Solid. Product Code: PIM000038566. | Australia |
| J-392G35 | J-392G35 is a nonionic polyethylene emulsion that provides great black heel resistance, toughness, buffability, and mar resistance for floor polish formulation. Please see the specification sheet below and for further details contact our local sales representative today. Group: Specialty chemicals, paints & coatings, polymers. Composition: High density polyethylene. Application: Polymer Producers, Lamination and Converting. Function: ADDITIVESOther. Physical Form: Liquid. Product Code: PIM000054002. | Australia |
Our database is helping our users find suppliers everyday.
