Find where to buy products from Australian suppliers, including: distributors, industrial manufacturers, bulk supplies and wholesalers of raw ingredients & finished goods.
Search for products or services, then visit the suppliers website for prices, SDS or more information. You can also view suppliers in NZ, UK or the USA.
| Product | Description | |
|---|---|---|
| BLANC FIXE MICRO | BLANC FIXE micro is a synthetic barium sulphate produced from high-purity solutions in a defined growth process. BLANC FIXE micro is organically coated. Key Application: Paints and Coatings (Powder coating & pigment pastes),Plastics and rubber (Thermoplastics, Elastomers & Thermosets) and Paper. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 7727-43-7. Composition: SYNTHETIC BARIUM SULFATE. Application: Thermoplastic Transformers, Thermosets & Composites, Powder Coating, Automotive Paints, Rubber & Elastomers. Function: PIGMENTS, Other. Physical Form: Nano powder. Product Code: PIM000032262. |  Australia |
| EASTMAN TRITAN RENEW COPOLYESTER TX1000-25 | Eastman Tritan Renew TX1000-25 is an amorphous copolyester with excellent appearance and clarity. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. This next generation copolyester can also be molded into various applications without incorporating high levels of residual stress. Key Application: Appliances (food contact),Building materials, Commercial housewares, Compounders, Consumer housewares-NFC, Large appliances non-food contact, Lighting, Non-medical housings & hardware for elec, Small appliances non-food contact, Water/sport bottles. Group: Specialty chemicals, polymers. Composition: Amorphous Copolyester. Application: Thermosets & Composites. Physical Form: Nano powder. Product Code: PIM000031777. | Australia |
| EASTMAN TRITAN RENEW TX2001-50 | EASTMAN TRITAN RENEW TX2001-50 is an amorphous copolyester with excellent appearance and clarity. TRITAN RENEW TX2001-50 contains a mold release derived from vegetable based sources. Key Application: Appliances (food contact), Automotive, Commercial housewares, Consumer electronics, Consumer housewares - food contact (fc), Consumer housewares, Large appliances non-food contact, Lighting, Packaging components non food contact, Personal care & cosmetics packaging, Process additives, Tools, Toys, Water/sport bottles. Group: Specialty chemicals, polymers. Composition: Amorphous Copolyester. Application: Thermosets & Composites. Physical Form: Nano powder. Product Code: PIM000031778. | Australia |
| ULTRAMARINE BLUE PRESTIGE RX | ULTRAMARINE BLUE PRESTIGE RX is ultramarine pigment, which is used in a wide range of applications including plastics, coatings and cosmetics. Occasionally, the pigment may come into contact with acids, either during processing or in the finished article. Selecting a resistant grade of ultramarine is important to maintain the color fastness of the pigment. Group: Specialty chemicals, polymers. CAS No. 101357-30-6, 24937-78-8, 1332-58-7. Composition: C.I. PIGMENT BLUE 29 (77007), Acetic acid ethenyl ester, copolymer with etheneKAOLIN. Application: Polymer Producers, Thermoplastic Transformers, Thermosets & Composites. Function: PIGMENTSUltra Marine Blue. Physical Form: Nano powder. Product Code: PIM000075224. | Australia |
| 3M GLASS BUBBLES K15 | Glass Bubbles K15 have a density of 0.15 g/cc and an isostatic crush strength of 300 psi. 3M glass bubbles K15 are ideal for use in a variety of water buoyancy applications, including additives in buoys and moorings. Like all 3M glass bubbles, K15 bubbles are compatible thermoset resins like polyurethane and epoxy, and are virtually insoluble in water. Group: Specialty chemicals, paints & coatings. Composition: Soda-lime-borosilicate glass. Application: Architectural and Deco., Adhesives & Sealants, Automotive Paints, Lamination and Converting, Powder Coating, Can, Coil and Industrial. Physical Form: Nano powder. Product Code: PIM000031756. | Australia |
| 3M GLASS BUBBLES K20 | 3M GLASS BUBBLES. K20 have a density of 0.20 g/cc and an isostatic crush strength of 500 psi. These general purpose spheres have a good strength-to-density ratio and are designed for use in a variety of shallow water (e.g. up to 2,000 feet of sea water) buoyancy applications, as well as emulsion explosives. Group: Specialty chemicals, paints & coatings. Composition: Soda-lime-borosilicate glass. Application: Architectural and Deco., Adhesives & Sealants, Automotive Paints, Lamination and Converting, Powder Coating, Can, Coil and Industrial. Physical Form: Nano powder. Product Code: PIM000031757. | Australia |
| 3M GLASS BUBBLES K25 | 3M glass bubbles K25 ideal additives for shallow water buoyancy applications or processing applications where high strength is needed. In addition, like all 3M glass bubbles, K25 bubbles are compatible with thermoset resins like polyurethane and epoxy, and are virtually insoluble in water. Application: Paints and Coatings, Rubber and Plastic, Transportation. Group: Specialty chemicals, paints & coatings. Composition: Soda-lime-borosilicate glass. Application: Architectural and Deco., Adhesives & Sealants, Automotive Paints, Lamination and Converting, Powder Coating, Can, Coil and Industrial. Physical Form: Nano powder. Product Code: PIM000031758. | Australia |
| 3M GLASS BUBBLES S28HS | Glass Bubbles S28HS are hollow glass spheres with a typical density of 0.28 g/cc and an isostatic crush strength of 3,000 psi. These glass bubbles are designed for numerous applications such as deep water syntactic foams and airless spray coatings. The bubbles produce strong, stable voids with low thermal conductivity, helping the coating achieve the necessary compressive strength. The S28HS Glass Bubbles offer a very good strength-to-density ratio and small particle size, making them suitable for a variety of applications such as buoyancy in oil and gas, airless sprayable paints and coatings, adhesives, mastics, sealants, SMC and other thermoset resin systems. Group: Specialty chemicals, paints & coatings. Composition: Soda-lime-borosilicate glass. Application: Architectural and Deco., Adhesives & Sealants, Automotive Paints, Lamination and Converting, Powder Coating, Can, Coil and Industrial. Physical Form: Nano powder. Product Code: PIM000031760. | Australia |
| 3M W-210 CERAMIC MICROSPHERES | 3M W-210. CERAMIC MICROSPHERES are made of alkali alumino silicate ceramic and is one of our smallest high-strength ceramic particles with a typical d90 of 12 microns; it has a controlled particle size distribution. Formulating with these ceramic microspheres allows higher filler loadings while maintaining desired properties such as viscosity control. In addition, these engineered particles are added to many paints and industrial coatings to provide scrub and burnish resistance. Due to their smaller particle size, ceramic microspheres white grade W-210 are typically chosen over other ceramic microspheres for higher gloss formulations. Formulators may be able to extend resin in their formulation by adding 3M ceramic microspheres and potentially reduce cost. Group: Specialty chemicals, paints & coatings. Composition: Alkali Alumino Silicate Ceramic. Application: Architectural and Deco., Can, Coil and Industrial. Physical Form: Nano powder. Product Code: PIM000031764. | Australia |
| A-C® 400A | A-C® 400A is a Ethylene vinyl acetate (EVA) copolymer in powder form, with a VA content of 13%, used extensively in hot melt adhesives (HMAs) to control rheology and boost adhesion. A-C® 400A displays a good benefits in providing the dual function of reducing application viscosity at melt, while providing an adhesion boost versus homopolymer, non functional diluents. A-C® 400A is suitable to use in color masterbatch as dispersing agent, process aid for EVA-based wire and cable compounds. Group: Specialty chemicals, polymers. CAS No. 24937-78-8. Composition: Ethylene Vinyl Acetate. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: Waxes, Dispersing Agents, POLYMERS, EVA. Physical Form: Nano powder. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007908. | Australia |
| ALBAWHITE 70 | ALBAWHITE 70 is a German madenatural barium sulfate concentrate, ALBAWHITE 70 is a good dispersable extender. ALBAWHITE 70 offers a list of great benefits and properties; as resistant to acids and alkalis, insoluble in water and organic solvents, lightfast and weatherproof, high brightness, colour neutral due to low refractive index, extremely low electrical conductivity, low binder demand & low abrasiveness due to low silica content. ALBAWHITE 70 is suitable for anti-corrosive paints & facade paints, powder coatings, adhesives & sealants, and plastics production. Group: Specialty chemicals, paints & coatings. Composition: Barium sulphate concentrates. Application: Powder Coating, Automotive Paints, Adhesives & Sealants. Function: ADDITIVES, Dispersing Agents. Physical Form: Nano powder. Product Code: PIM000034637. | Australia |
| ALUMINUM HYDROXIDE AH-1 | Aluminium hydroxide finds use as a fire retardant filler for polymer applications. It is selected for these applications because it is colorless (like most polymers), inexpensive, and has good fire retardant properties. It decomposes at about 180 °C (356 °F), absorbing a considerable amount of heat in the process and giving off water vapour. In addition to behaving as a fire retardant, it is very effective as a smoke suppressant in a wide range of polymers, most especially in polyesters, acrylics, ethylene vinyl acetate, epoxies, PVC and rubber. Group: Specialty chemicals, polymers. CAS No. 21645-51-2. Composition: Alumina Trihydrate / ATH. Application: Masterbatch & Compounders. Function: ADDITIVESFlame retardants. Physical Form: Nano powder. Product Code: PIM000086960. | Australia |
| BEROSOL EC | BEROSOL EC is an optimized blend based on a synergy between special nonionic and nano-particles. This provides a high level of performance in the following applications, All-purpose cleaner it provides water spot resistance and is suitable for use with all types of hard surfaces such as glass, tiles, ceramics, plastics, stainless steel, chrome, and painted surfaces. Glass Cleaner it provides an excellent cleaning effect on glass and other smooth surfaces such as mirrors, windows, and facades. Car Wash it increases the wetting capacity and removes dirt from cars. Group: Personal care ingredients, homecare & institutional cleaning. Composition: Synthetic. Application: Bath & Toilet Cleaner, Institutional Cleaner, Car Care. Function: Cleanser. Physical Form: Liquid. Product Code: PIM000041091. | Australia |
| BUTVAR® B-72 | BUTVAR® B-72 is a thermoplastic, polyvinyl butyral resin which offers a unique combination of properties for coating or adhesive applications. The use or addition of polyvinyl butyral to a system imparts adhesion, toughness, and flexibility. PVB retains the clarity of the coating and offers reactive hydroxyl sites for crosslinking with thermoset systems. Group: Specialty chemicals, paints & coatings. Composition: No Hazardous Ingredients. Application: Powder Coating, Adhesives & Sealants. Function: ADDITIVES, Adhesion Promoters. Physical Form: Nano powder. Product Code: PIM000039777. | Australia |
| CALCIUM HYDROXIDE | CALCIUM HYDROXIDE appears as a white powder and acts as a disinfectant to prevent infectious diseases in livestock. CALCIUM HYDROXIDE offers the function to provide the primary source of calcium to crops and plants. Group: Specialty chemicals, electronic & specialties. CAS No. 1305-62-0. Composition: Calcium Hydroxide. Application: Plant & Crop Protection. Function: ADDITIVESOther. Physical Form: Nano powder. Product Code: PIM000034906. | Australia |
| CHLORIDE RUTILE TITANIUM DIOXIDE CR718 | CHLORIDE. RUTILE. TITANIUM DIOXIDE CR718 is a zirconium, aluminum and organic surface treated multipurpose rutile titanium dioxide pigment manufactured by chloride process, CR718 pigment has outstanding dispersion performance, dispersing quickly and easily. It also has excellent opacity and gloss, and delivers a brilliant whiteness with blue undertone. CHLORIDE. RUTILE. TITANIUM DIOXIDE CR718. is recommended to use in coating, inks, leather, paints, plastic & rubber applications. Please see the specification sheet below and for further details contact our local sales representative today. Group: Specialty chemicals, paints & coatings. CAS No. Composition: Chloride Rutile Titanium Dioxide. Application: Automotive Paints, Powder Coating, Printing Inks, Rubber & Elastomers. Function: PIGMENTSTiO2 (Titanium Dioxide). Physical Form: Nano powder. Product Code: PIM000046800. | Australia |
| CP4-8991 | CP 4-8991 is a matting agent and amorphous silica with special organic treatment, appearing as white free flowing powder. CP4-8991 is mainly used for matting of thin film systems, e.g. High quality water-borne and solvent-borne furniture coatings, artificial and natural leather coatings, coatings for automotive plastic parts, coatings for foils and laminates. Group: Specialty chemicals, paints & coatings. Composition: Amorphous Silica. Application: Powder Coating, Architectural and Deco., Can, Coil and Industrial, Can, Coil and Industrial, Lamination and Converting. Function: ADDITIVES, Matting Agents. Physical Form: Nano powder. Product Code: PIM000032183. | Australia |
| DCC MADDER LAKE CLDX | DCC MADDER LAKE CLDX is a bright blue shade red pigment used primarily for offset inks. Group: Specialty chemicals, paints & coatings. CAS No. Composition: 9, 10- Anthracenedione, 1, 2- dihydroxy-. Application: Powder Coating, Automotive Paints. Function: PIGMENTS, Other. Physical Form: Nano powder. Product Code: PIM000039806. | Australia |
| DCC ORANGE 1606 | DCC ORANGE 1606 is a pre-darken blue shade molybdate orange pigment with stir-in properties used in plastic and coating applications where excellent weather fastness properties are required. Group: Specialty chemicals, paints & coatings. CAS No. 6505-28-8. Composition: Lead chromate molybdate sulfate red. Application: Automotive Paints, Powder Coating. Function: PIGMENTSOther. Physical Form: Nano powder. Product Code: PIM000039801. | Australia |
| DCC YELLOW 1012 | DCC YELLOW 1012 is a standard medium chrome yellow pigment with stir-in properties used in plastic and coating applications. Group: Specialty chemicals, paints & coatings. CAS No. 7758-97-6. Composition: C. I. Pigment Yellow 34 (Lead sulfochromate). Application: Powder Coating, Automotive Paints. Function: PIGMENTS, Other. Physical Form: Nano powder. Product Code: PIM000039796. | Australia |
| DCC YELLOW 1032 | DCC YELLOW 1032 is a standard lemon chrome yellow pigment used in coating and plastic applications. Group: Specialty chemicals, paints & coatings. CAS No. 7758-97-6. Composition: C. I. Pigment Yellow 34 (Lead sulfochromate). Application: Powder Coating, Automotive Paints. Function: PIGMENTS, Other. Physical Form: Nano powder. Product Code: PIM000039797. | Australia |
| DCC YELLOW 1036 | DCC YELLOW 1036 is a standard lemon chrome yellow pigment with stir-in properties used in plastic and coating applications. Group: Specialty chemicals, paints & coatings. CAS No. 7758-97-6. Composition: C. I. Pigment Yellow 34 (Lead sulfochromate). Application: Powder Coating, Automotive Paints. Function: PIGMENTS, Other. Physical Form: Nano powder. Product Code: PIM000039798. | Australia |
| DCC YELLOW 1462F | DCC YELLOW 1462F is mid shade yellow pigment for use in food packaging applications. It displays very good resistance to MEK, water, mineral spirits & ethanol, good resistance to ethyl acetate & acid and fair resistance to xylene & alkali. DCC YELLOW 1462F shows some warpage, very good masstone & fair tint light fastness and excellent masstone & fair tint weather fastness. Recommended for PE and PS. It is FDA compliant. Group: Specialty chemicals, paints & coatings. CAS No. 7758-97-6. Composition: Benzenesulfonic acid, 4- [[1- [[(2- methylphenyl) amino]carbonyl]- 2- oxopropyl]azo]- 3- nitro-, Calcium salt (2:1). Application: Powder Coating, Automotive Paints. Function: PIGMENTS, Other. Physical Form: Nano powder. Product Code: PIM000039800. | Australia |
| DCC YELLOW Y969 | DCC YELLOW Y969 is a standard medium chrome yellow pigment used in plastic and coating applications. Group: Specialty chemicals, paints & coatings. CAS No. 1344-37-2. Composition: C. I. Pigment Yellow 34 (Lead sulfochromate). Application: Automotive Paints, Powder Coating. Function: PIGMENTSOther. Physical Form: Nano powder. Product Code: PIM000039810. | Australia |
| DIMACIT TMTD-PDR | DIMACIT TMTD-PDR offers fast vulcanization and gives an excellent vulcanization plateau with good heat aging and compression set resistance when used in sulfurless vulcanization systems and EV systems. Group: Specialty chemicals, electronic & specialties. Composition: Thiram. Application: Others. Function: POLYMERS, Silicone Rubber. Physical Form: Nano powder. Product Code: PIM000039778. | Australia |
| DOWSIL 23N ADDITIVE | DOWSIL 23N ADDITIVE is a silicone additive, that display a resistant to scratching and general marking, also provides a matt finish to the end use. DOWSIL 23N ADDITIVE is great for the application in solvent and aqueous coatings for touch modification, Imparts mar and abrasion resistance. Order a sample today with you new product development. Group: Specialty chemicals, paints & coatings. CAS No. 153890-18-7. Composition: Siloxanes and Silicones, di-Me, hydroxy-terminated, reaction. Application: Lamination and Converting, Powder Coating. Function: ADDITIVES, Matting Agents. Physical Form: Nano powder. Product Code: PIM000043030. | Australia |
| EASTAR GN071 | EASTAR GN071 is used for injection molding applications. It is sparkling clear, tough, chemical resistant, odor-free, versatile, easy to work with, and affordable. EASTAR GN071 has the great attributes of being easy to extrude, cut, print, and seal, effective barrier properties, excellent chemical resistance, excellent clarity, excellent colourability, good impact strength, and good stiffness, high gloss appearance & toughness. Group: Specialty chemicals, polymers. Composition: Copolyester. Application: Fibers, Textiles & Films, Fibers, Textiles & Films, Polymer Producers. Function: POLYMERS, Polyester - PET. Physical Form: Nano powder. Product Code: PIM000035961. | Australia |
| EASTAR GN119 | EASTAR GN119 is a low-I.V. PETG, as a high-flow formulation and certified with GREENGUARD INDOOR AIR QUALITY. EASTAR GN119 can be used in the application for colour cosmetics packaging, packaging components nonfood-contact & skin care packaging. Group: Specialty chemicals, polymers. Composition: Copolyester. Application: Fibers, Textiles & Films, Fibers, Textiles & Films, Polymer Producers. Function: POLYMERS, Polyester - PET. Physical Form: Nano powder. Product Code: PIM000035962. | Australia |
| EASTMAN CA-398-3 FOOD CONTACT | EASTMAN CA-398-3 FOOD CONTACT is one of the lower viscosity solution grades of cellulose acetate. The average ASTM viscosity of EASTMAN CA-398-3 FOOD CONTACT is 3 seconds. EASTMAN CA-398-3 FOOD CONTACT is supplied in the form of a fine, dry, free-flowing powder. EASTMAN CA-398-3 FOOD CONTACT can offer a multipurpose rheology enhancer that provides high strength and good resistance to ultraviolet light, heat, oils, and greases. Useful in lacquers for glass, plastic, wire, and release coatings. It may be blended with appropriate solvents, plasticizers, and other modifying resins to formulate coatings for paper, glass, plastic, wire screen, and electrical wiring. When dissolved in appropriate solvents selected for EASTMAN CA-398-3 FOOD CONTACT, a clear, colourless solution is produced. Group: Specialty chemicals, paints & coatings. Composition: Mixture. Application: Lamination and Converting, Construction, Printing Inks, Powder Coating, Can, Coil and Industrial, Can, Coil and Industrial, Automotive Paints, Adhesives & Sealants. Function: ADDITIVES, Other. Physical Form: Nano powder. Product Code: PIM000037712. | Australia |
| EASTMAN CAB 171-15 | EASTMAN CAB 171-15 is soluble in low molecular weight ketones, chlorinated hydrocarbons, and nitroparaffins. When CAB-171-15 is dissolved in appropriate solvents a clear, colorless solution is produced. Group: Specialty chemicals, paints & coatings. Composition: Mixture. Application: Powder Coating, Lamination and Converting, Printing Inks, Construction, Can, Coil and Industrial, Can, Coil and Industrial, Architectural and Deco. Function: ADDITIVES, Matting Agents. Physical Form: Nano powder. Product Code: PIM000037713. | Australia |
| EASTMAN CAB 381-20 BP | EASTMAN CAB 381-20 BP offers a combination of solubility and compatibility, moisture resistance, excellent surface hardness, and good film strength, also dissolved in appropriate solvents a clear, colorless solution is produced. Group: Specialty chemicals, paints & coatings. Composition: Cellulose Acetate Butyrate. Application: Powder Coating, Lamination and Converting, Construction, Printing Inks, Can, Coil and Industrial, Can, Coil and Industrial, Automotive Paints, Architectural and Deco. Physical Form: Nano powder. Product Code: PIM000035963. | Australia |
| EASTMAN CAB 500-5 | EASTMAN CAB 500-5 is a cellulose ester with high butyryl content, low hydroxyl content, and medium ASTM(A) viscosity. It offers a wide range of solubility and compatibility. It is tolerant of nonpolar aliphatic and aromatic hydrocarbons. It produces a relatively soft, flexible film requiring little or no plasticizer in many applications. When EASTMAN CAB 500-5 is dissolved in appropriate solvents a clear, colorless solution is produced. EASTMAN CAB 500-5 is supplied as a dry, white free-flowing powder and is convenient to handle. Group: Specialty chemicals, paints & coatings. CAS No. 9004-36-8. Composition: Cellulose acetate butyrate. Application: Powder Coating, Construction, Can, Coil and Industrial, Can, Coil and Industrial, Printing Inks, Automotive Paints, Architectural and Deco. Function: ADDITIVES, Matting Agents. Physical Form: Nano powder. Product Code: PIM000037714. | Australia |
| EASTMAN CELLULOSE ACETATE BUTYRATE (CAB-381-0.1) | EASTMAN CELLULOSE ACETATE BUTYRATE (CAB-381-0.1) is a cellulose ester with medium butyryl content and low viscosity. It was designed for use where low-application viscosities at relatively high solids levels are needed. It is soluble in a wide range of solvents and compatible with many other resins. It will also tolerate the use of solvent blends currently exempt from certain air pollution regulations. When CAB-381-0.1 is dissolved in appropriate solvents a clear, colorless solution is produced. It is supplied as a dry, free-flowing powder. Group: Specialty chemicals, paints & coatings. Composition: Cellulose acetate butyrate. Application: Can, Coil and Industrial, Powder Coating, Adhesives & Sealants, Printing Inks. Function: SOLVENTSCleaner / Detergent. Physical Form: Nano powder. Product Code: PIM000039779. | Australia |
| EASTMAN CELLULOSE ACETATE BUTYRATE (CAB-381-0.5) | EASTMAN CELLULOSE ACETATE BUTYRATE (CAB-381-0.5) is a cellulose ester with medium butyryl content and low viscosity. It was designed for use where low-application viscosities at relatively high solids levels is needed. It is soluble in a wide range of solvents and compatible with many other resins. When CAB-381-0.5 is dissolved in appropriate solvents a clear, colorless solution is produced. It will also tolerate the use of solvent blends currently exempt from certain air pollution regulations. It is supplied as a dry, free-flowing powder. Group: Specialty chemicals, paints & coatings. Composition: Cellulose acetate butyrate. Application: Can, Coil and Industrial, Can, Coil and Industrial, Powder Coating, Adhesives & Sealants, Printing Inks. Function: SOLVENTS, Diluent. Physical Form: Nano powder. Product Code: PIM000039780. | Australia |
| EASTMAN CELLULOSE ACETATE BUTYRATE (CAB-381-2) | EASTMAN CELLULOSE ACETATE BUTYRATE (CAB-381-2) is a cellulose ester with medium butyryl content and high viscosity. Other than a higher viscosity and molecular weight, this cellulose ester shares the same general characteristics as CAB-381-0.1 and CAB-381-0.5. CAB-381-2 offers a combination of solubility and compatibility, moisture resistance, excellent surface hardness, and good film strength. When CAB-381-2 is dissolved in appropriate solvents, a clear, colorless solution is produced. It is supplied as a dry, free-flowing powder. Eastman CAB-381-2 is based on cellulose, one of the most abundant natural renewable resources. The calculated approximate bio-content value of 40% for Eastman CAB-381-2 was determined by using six bio-based carbon atoms per anhyroglucose unit divided by the total number of carbons per anhyroglucose unit. Although the value reported is not specifically measured for bio-carbon, it can be estimated based on typical partition data. Group: Specialty chemicals, paints & coatings. Composition: Cellulose acetate butyrate. Application: Adhesives & Sealants, Can, Coil and Industrial, Can, Coil and Industrial, Powder Coating, Printing Inks. Function: SOLVENTS, Diluent. Physical Form: Nano powder. Product Code: PIM000039766. | Australia |
| EASTMAN CELLULOSE ACETATE BUTYRATE (CAB-531-1) | EASTMAN CELLULOSE ACETATE BUTYRATE (CAB-531-1) is a cellulose ester with a higher butyryl level than Eastman CAB-381 type esters. Tough films with good resistance to marring and weathering are possible through combinations of cellulose acetate butyrate with thermoplastic acrylic resins. Eastman CAB-531-1 and CAB-381 esters are similar in hydroxyl content and solubility characteristics, both being soluble in a wide range of solvents. Eastman CAB-531-1 is a more flexible resin that requires lower plasticizer modification than the Eastman CAB-381 esters. When CAB-531-1 is dissolved in appropriate solvents, a clear, colorless solution is produced. Eastman CAB-531-1 is based on cellulose, one of the most abundant natural renewable resources. The calculated approximate bio-content value of 38% for Eastman CAB-531-1 was determined by using six bio-based carbon atoms per anhyroglucose unit divided by the total number of carbons per anhyroglucose unit. Although the value reported is not specifically measured for bio-carbon, it can be estimated based on typical partition data. Group: Specialty chemicals, paints & coatings. Composition: No Hazardous Ingredients. Application: Can, Coil and Industrial, Can, Coil and Industrial, Powder Coating, Adhesives & Sealants, Printing Inks. Function: ADDITIVES, Adhesion Promoters, Other, BINDERS, Acrylic Resins. Physical Form: Nano powder. Product Code: PIM000039781. | Australia |
| EASTMAN CELLULOSE ACETATE BUTYRATE (CAB-551-0.01) | EASTMAN CELLULOSE ACETATE BUTYRATE (CAB-551-0.01) has many unique attributes that will serve useful across many different coating application areas. It has the lowest Tg (glass transition temperature) of the CAB portfolio. It also has the second lowest M(n), which helps its compatibility with other coatings components. It is compatible with numerous cross-linking resins and has a lower solution viscosity. In coatings, Eastman CAB-551-0.01 gives clear films, reduces surface tack and mottling, minimizes cratering, improves flow and thermal reflow, and provides inter coat adhesion and good UV stability. Its good compatibility with a wide range of curing resin systems and its solubility in a wide variety of solvents and solvent combinations make it useful as an additive in numerous coating compositions. When dissolved in appropriate solvents selected for CAB-551-0.01, a clear, colorless solution is produced. It is useful in lacquers for glass, plastic, wire and release coatings and is available in pellet form. Group: Specialty chemicals, polymers. Composition: Cellulose acetate butyrate. Application: Can, Coil and Industrial, Can, Coil and Industrial, Powder Coating, Adhesives & Sealants, Printing Inks. Function: SOLVENTS, Cosolvent. Physical Form: Nano powder. Product Code: PIM000039782. | Australia |
| EASTMAN CELLULOSE ACETATE BUTYRATE (CAB-551-0.2) | EASTMAN CELLULOSE ACETATE BUTYRATE (CAB-551-0.2) is a cellulose ester with high butyryl content and relatively low molecular weight. It is compatible with numerous cross-linking resins and has a lower solution viscosity. In coatings, Eastman CAB-551-0.2 gives clear films, reduces surface tack and mottling, minimizes cratering, improves flow and thermal reflow, and provides inter coat adhesion and good UV stability. It is useful for durable cross-linked formulations. Its good compatibility with a wide range of curing resin systems and its solubility in a wide variety of solvents and solvent combinations make it useful as an additive in numerous coating compositions. When CAB-551-0.2 is dissolved in appropriate solvents a clear, colorless solution is produced. Group: Specialty chemicals, polymers. Composition: Cellulose acetate butyrate. Application: Can, Coil and Industrial, Can, Coil and Industrial, Powder Coating, Adhesives & Sealants, Printing Inks. Function: SOLVENTS, Cosolvent. Physical Form: Nano powder. Product Code: PIM000039783. | Australia |
| EASTMAN CELLULOSE ACETATE PROPIONATE (CAP-504-0.2) | EASTMAN CELLULOSE ACETATE PROPIONATE (CAP-504-0.2) is a free-flowing powder having low odor, low color, and high hydroxyl content. It is fast dissolving, has good water tolerance and resistance to souring, and is compatible with many ink resins and solvents. It has good resistance to discoloration from UV light and has good adhesion to plastics. It has a low viscosity (0.2 seconds) and has an approximate propionyl content of 42.5 wt%. When CAP-504-0.2 is dissolved in appropriate solvents, a clear, colorless solution is produced. Eastman CAP-504-0.2 is based on cellulose, one of the most abundant natural renewable resources. The calculated approximate bio-content value of 49% for Eastman CAP-504-0.2 was determined by using six bio-based carbon atoms per anhyroglucose unit divided. Group: Specialty chemicals, polymers. Composition: Cellulose acetate propionate. Application: Can, Coil and Industrial, Can, Coil and Industrial, Powder Coating, Adhesives & Sealants, Printing Inks. Function: SOLVENTS, Cosolvent. Physical Form: Nano powder. Product Code: PIM000039784. | Australia |
| EASTMAN TENOX BHT FG ANTIOX K | EASTMAN TENOX BHT FG ANTIOX K is an antioxidant stabilize various fats, oils, food, and cosmetics against oxidative deterioration, thus extending product shelf life. EASTMAN TENOX BHT FG ANTIOX K is a formulation of Eastman Tenox BHA and Eastman Tenox BHT. EASTMAN TENOX BHT FG ANTIOX K can be used in beverage ingredients, food ingredients & food preservatives. Group: Specialty chemicals, electronic & specialties. CAS No. 8001-30-7, 25013-16-5, 128-37-0. Composition: Corn oil, Butylated hydroxyanisole, Butylated hydroxytoluene. Application: Others. Function: ADDITIVES, Antioxidants. Physical Form: Nano powder. Product Code: PIM000037721. | Australia |
| EASTMAN TRITAN MFX121 | EASTMAN TRITAN MFX121 is an amorphous opaque product, that contains a mold release derived from vegetable-based sources. EASTMAN TRITAN MFX121 can offer the benefits of excellent toughness, hydrolytic stability, heat resistance, chemical resistance, and melt flowability. EASTMAN TRITAN MFX121 is best to use in the application for medical equipment and housings and hardware. Group: Specialty chemicals, electronic & specialties. Composition: Copolyester. Application: Medical Application. Physical Form: Nano powder. Product Code: PIM000035971. | Australia |
| EASTMAN TRITAN MX710 | EASTMAN TRITAN MX710 is an amorphous product with excellent appearance and clarity. EASTMAN TRITAN MX710 has many outstanding features that include excellent toughness, hydrolytic stability, heat resistance, and chemical resistance. EASTMAN TRITAN MX710 can be used in blood therapy, consumer housewares-NFC, medical devices & medical labware application. Group: Specialty chemicals, electronic & specialties. Composition: Copolyester. Application: Medical Application. Physical Form: Nano powder. Product Code: PIM000035973. | Australia |
| EASTMAN TRITAN MX711 | EASTMAN TRITAN MX711 is an amorphous product with excellent appearance and clarity. EASTMAN TRITAN MX711 has many outstanding features that include excellent toughness, hydrolytic stability, heat resistance, and chemical resistance. EASTMAN TRITAN MX711 can be used in blood contact and dialysis, blood tubes, fluid administration, medical devices, medical equipment & medical labware applications. Group: Specialty chemicals, electronic & specialties. Composition: Copolyester. Application: Medical Application. Physical Form: Nano powder. Product Code: PIM000035974. | Australia |
| EASTMAN TRITAN MX731 | EASTMAN TRITAN MX 731 is an amorphous product with excellent appearance and clarity. It is derived from vegetable sources. EASTMAN TRITAN MX 731 offers the great benefit of excellent toughness, hydrolytic stability, heat resistance, chemical resistance, and melt flowability. EASTMAN TRITAN MX 731 can be used for blood contact and dialysis, blood tubes, fluid administration, medical devices, medical equipment, and medical labware applications. Group: Specialty chemicals, electronic & specialties. Composition: Copolyester. Application: Medical Application. Physical Form: Nano powder. Product Code: PIM000035972. | Australia |
| EASTMAN TRITAN RENEW COPOLYESTER TX2001 25 | Tritan Renew TX1501HF-50 contains a mold release derived from vegetable based sources. Other outstanding features include good toughness, hydrolytic stability, and heat and chemical resistance. Key Function: Ease of processing, Excellent clarity, Excellent hydrolytic stability, Fast drying times, Good chemical resistance, Good heat resistance, Outstanding impact resistance, Quick cycle times. Group: Specialty chemicals, polymers. Composition: Amorphous Copolyester. Application: Rubber & Elastomers, Polymer Producers. Physical Form: Nano powder. Product Code: PIM000031780. | Australia |
| EASTMAN TRITAN RENEW TX1501HF 50 | Eastman Tritan Renew TX1501HF-50 copolyester is a high flow grade of Eastman Tritan. Group: Specialty chemicals, polymers. Composition: Copolyester. Application: Fibers, Textiles & Films, Fibers, Textiles & Films, Rubber & Elastomers. Physical Form: Nano powder. Product Code: PIM000031779. | Australia |
| FINNFIX® 30 | FINNFIX® 30 product is a purified low viscous Sodium Carboxymethylcellulose, based on sustainably sourced cellulose. Group: Specialty chemicals, electronic & specialties, paints & coatings, polymers. CAS No. 9004-32-4. Composition: sodium salt of carboxymethyl cellulose. Application: Construction, Fibers, Textiles & Films, Fine chemicals & Custom Synt., Mining, Others, Plant & Crop Protection, Printing Inks. Function: ADDITIVESRheology Modifiers. Physical Form: Nano powder. Claim: Bio-Based, Renewable. Product Code: PIM000075852. | Australia |
| FINNTALC M30 | FINNTALC M30 is a functional extender made from a hydrated magnesium silicate with a chemical formula of Mg3Si4O10(OH)2. That provides great properties of being good barrier properties, good anti-corrosion properties, good reinforcement of paint film, good adhesion and standability, and matting of high PVC paint. FINNTALC M30 is perfect for your application in paints & coating, adhesives, sealants, plastics & fertilisers. Group: Specialty chemicals, paints & coatings. Composition: Talc (Mg3H2(SiO3)4), Dolomite. Application: Adhesives & Sealants, Automotive Paints. Function: ADDITIVES, Other. Physical Form: Nano powder. Product Code: PIM000039173. | Australia |
| GLASS BUBBLES S38HS | Glass Bubbles S38HS are hollow glass spheres with a typical density of 0.38 g/cc and an isostatic crush strength of 5,500 psi. These glass bubbles are designed for buoyancy and insulation in ultra-deep water applications in oil and gas drilling. The bubbles produce strong, stable voids and low thermal conductivity, helping coatings achieve the necessary compressive strength. These Glass Bubbles are designed for pipeline insulation in ultra-deep water applications and low density sheet moulding compounds (SMC).Applicaiton: Compounding, Insulation and Buoyancy, Paints and Coatings, Rubber and Plastic, Transportation. Group: Specialty chemicals, paints & coatings. Composition: Soda-lime-borosilicate glass. Application: Architectural and Deco., Adhesives & Sealants, Automotive Paints, Lamination and Converting, Powder Coating, Can, Coil and Industrial. Physical Form: Nano powder. Product Code: PIM000031761. | Australia |
| HECELLOSE® HM-500 | HEC(Hydroxyethyl Cellulose) a non-ionic water soluble polymer derived from cellulose, is widely used for paint, personal care products, construction, oil drilling and other special areas. It provides thickening, protective colloids, workability, moisturizing effects, surface activity and stability, ensuring a high quality final product. It is commonly recognized worldwide for environmental friendly properties. Group: Specialty chemicals, paints & coatings. Composition: Hydroxyethyl Cellulose. Application: Construction. Function: POLYMERS, Other. Physical Form: Nano powder. Product Code: PIM000031792. | Australia |
| HJSIL ® 200 | HJSIL® 200 is a kind of hydrophilic fumed silica with a specific surface area of 200 m2/g. Its high purity white colloidal powder. Application: HTV and RTV silicone rubber, Adhesives and sealants, Paints, coatings and pigments, Printing inks, Cable compounds, Unsaturated polyester resins, laminated resins and Gel coats. Group: Specialty chemicals, paints & coatings, polymers. Composition: hydrophilic fumed silica. Application: Rubber & Elastomers, Printing Inks, Can, Coil and Industrial, Can, Coil and Industrial, Automotive Paints, Adhesives & Sealants. Function: ADDITIVES, Adhesion Promoters. Physical Form: Nano powder. Product Code: PIM000031790. | Australia |
| HJSIL® R272 | HJSIL® R272 is a hydrophobic fumed silica, appears in a high purity white colloidal powder. HJSIL® R272 function as thickner, anti-settling agent, anti-caking agent and anti-sagging agent. HJSIL® R272 is suitable to use in adhesives and sealants, coatings and paints, printing inks and toner, cable compounds and gels & silicone rubber and silicone sealants applications. Group: Specialty chemicals, paints & coatings. CAS No. 112945-52-5. Composition: Hydrophobic fumed silica. Application: Printing Inks, Powder Coating, Adhesives & Sealants. Function: ADDITIVES, Other. Physical Form: Nano powder. Product Code: PIM000041171. | Australia |
| KRISTALEX 3085 | KRISTALEX 3085 is a water-white, highly color stable, nonpolar, low molecular weight thermoplastic polymer, compatible with a wide variety of oils, waxes, alkyds, plastics, and elastomers, and is soluble in many common organic solvents. KRISTALEX 3085 can offer the great benefits of being excellent thermal stability, intermediate softening point, made from purified aromatic monomers & water-white initial colour. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 9011-11-4. Composition: Hydrocarbon Polymer. Application: Can, Coil and Industrial, Can, Coil and Industrial, Printing Inks, Fibers, Textiles & Films, Fibers, Textiles & Films, Construction, Adhesives & Sealants. Physical Form: Nano powder. Product Code: PIM000035975. | Australia |
| LITHOPONE 30% L | LITHOPONE 30% L is a white pigment based on co-precipitated zinc sulphide/ barium sulphate, no inorganic surface treatment has been applied making LITHOPONE 30% L suitable for latices production. The product is chemically resistant on the pH range between 4 and 12. Group: Specialty chemicals, paints & coatings. Composition: Zinc Sulphide/ Barium Sulphate. Application: Automotive Paints, Powder Coating. Function: PIGMENTS, Other. Physical Form: Nano powder. Product Code: PIM000032263. | Australia |
| LUDOX® AS-40 | LUDOX AS-40 is a low density, colloidal silica used as a filler in coating applications. It is an aqueous colloidal dispersion containing 40% synthetic amorphous silica of nominal 22 nanometer particle size. It has negative surface charge and is stabilized with ammonium hydroxide. It has low sodium level, an overall negative particle charge, good binding strength and stability in most applications. Group: Specialty chemicals, paints & coatings. Composition: Alkaline 40%. Application: CanCoil and Industrial. Physical Form: Liquid. Product Code: PIM000032185. | Australia |
| LUDOX®SM | LUDOX SM is a Colloidal Silica contains synthetic amorphous silica of nominal 7 nanometer particle size. The alkaline aqueous colloidal dispersion contains 30% silica. It is useful as a high temperature binder for precision investment casting, refractory fibers, stool coatings, etc. It is broadly used in the formulation of coatings, catalysts, and antisoil treatments. Key features are: Excellent binding strength, Good stability. Group: Specialty chemicals, paints & coatings. Composition: Colloidal Silica. Application: Can, Coil and Industrial, Powder Coating. Physical Form: Liquid. Product Code: PIM000032186. | Australia |
| LUNA-FLEX MP45-H | LUNA-FLEX MP45-H is a chlorinated binder that can be used to. produce steel coatings, deck coatings, marine coatings, automotive coatings, printing inks and road-marking paints. LUNA-FLEX MP45-H provides anti-corrosion stability to enable coatings resistant to salt, water and chemicals. It also improves resistance to weathering and yellowing. Group: Specialty chemicals, paints & coatings. CAS No. 25154-85-2. Composition: Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether. Application: Automotive Paints, Architectural and Deco., Printing Inks. Function: BINDERSVinyl Resins. Physical Form: Nano powder. Product Code: PIM000051974. | Australia |
| POTASSIUM ACETATE 99 | POTASSIUM ACETATE 99 is the source of liquid fertiliser in agriculture application. POTASSIUM ACETATE 99 helps strengthen plants' abilities to resist disease and plays an important role in increasing crop yields and overall quality & also protects the plant when the weather is cold or dry, strengthening its root system and preventing wilt. Group: Specialty chemicals, electronic & specialties. CAS No. 127-08-2. Composition: Potassium Acetate. Application: Plant & Crop Protection. Function: ADDITIVES, Other. Physical Form: Nano powder. Product Code: PIM000034887. | Australia |
| PRECARB 100 | PRECARB 100 is a plastic & elastomers filler and extender additives. PRECARB 100 is capable for a high degree of chemical purity, high level of whiteness and opacity, exactly defined crystal structures & exceptional fineness, and close particle size distribution. PRECARB 100 is a great cost-effective, odorless, & good surface finish and gloss solution. PRECARB 100 is suitable for dispersion paints, printing inks, Rigid PVC/ window profiles, paper pulp, specialty papers, transportation industry, building industry/construction & sealants, and adhesives. Group: Specialty chemicals, paints & coatings. CAS No. 471-34-1. Composition: Carbonic Acid & Calcium Salt. Application: Printing Inks, Adhesives & Sealants. Function: ADDITIVES, Other. Physical Form: Nano powder. Product Code: PIM000034638. | Australia |
| PRIMGREEN L.A.T. 12035 | PRIMGREEN L.A.T. 12035 is a adhesive agent, it is a water-based (low VOC) primer designed to provide Rilsan® PA11 coatings optimum anticorrosion protection on a variety of metal substrates. Key Benefits are Epoxy acrylate based resin solution, Recommended thickness: 8-12 μm and Air drying. Group: Specialty chemicals, paints & coatings. Composition: Epoxy acrylate. Application: Adhesives & Sealants. Function: ADDITIVES, Other. Physical Form: Nano powder. Product Code: PIM000031733. | Australia |
| RILSAN® ESY BLEU 7265 | RILSAN ESY BLEU 7265 is a blue spray agent. Its key application are DECORATIVE, FASTENERS and AUTOMOTIVE. Its key properties are versatile processing and Edge covering. Group: Specialty chemicals, paints & coatings. Composition: Versatile Rilsan. Application: Automotive Paints, Architectural and Deco. Function: ADDITIVES, Other. Physical Form: Nano powder. Product Code: PIM000031734. | Australia |
| RILSAN® T BLANC 1488 AC | RILSAN T BLANC 1488 AC is a white dipping agent, appear as a fine powder form. Its key application are Dishwasher basket & Wire goods. Its key properties are excellent wetting, cost effective, flexibility, Impact resistance and sensitive to cross contamination. Group: Specialty chemicals, paints & coatings. Composition: Versatile Rilsan. Application: Powder Coating. Function: ADDITIVES, Other. Physical Form: Nano powder. Product Code: PIM000031735. | Australia |
| RILSAN® T NOIR 7450 AC | RILSAN T NOIR 7450 AC is a white dipping agent, appear as a fine powder form. Its key application are Dishwasher basket & Wire goods. Its key properties are excellent wetting, cost effective, flexibility, Impact resistance and sensitive to cross contamination. Group: Specialty chemicals, paints & coatings. Composition: Versatile Rilsan. Application: Powder Coating. Function: ADDITIVES, Other. Physical Form: Nano powder. Product Code: PIM000031736. | Australia |
| SACHTLEBEN RDE-2 | SACHTLEBEN RDE2 is alumina-silica surface treated rutile titanium dioxide pigment. It shows high outdoor durability, easy dispersibility and very good optical properties in reverse printing and lamination inks as well as in paper coating. Group: Specialty chemicals, paints & coatings. CAS No. 1314-98-3. Composition: Synthetic Zinc Sulphide. Application: Printing Inks, Powder Coating. Function: PIGMENTS, Other. Physical Form: Nano powder. Product Code: PIM000032272. | Australia |
| SHIELDEX® AC 3 | SHIELDEX® AC 3 is a Non-Toxic Anti-Corrosive Pigment is a calcium ion-exchanged, synthetic amorphous silica, appearing as white free flowing powder. It is an easily dispersible, non-toxic, high performance anti-corrosion pigment with low particle size. SHIELDEX® AC 3 Non-Toxic Anti-Corrosive Pigment is mainly used as an anti-corrosion pigment for: Coil coating primers, One- or two-component wash primers. Group: Specialty chemicals, paints & coatings. Composition: Synthetic Amorphous Silica. Application: CanCoil and Industrial. Function: Corrosion Inhibitors. Physical Form: Nano powder. Product Code: PIM000032187. | Australia |
| SODIUM FLUORIDE | SODIUM FLUORIDE GRANULAR UL is a water treatment grade white powder. SODIUM FLUORIDE GRANULAR UL has the key application for treatment of drinking water, in order to prevent dental caries and the treatment of dental carise of children in some fluoride-deficient areas. Group: Specialty chemicals, electronic & specialties. CAS No. 7681- 49- 4. Composition: Sodium fluoride. Application: Others. Physical Form: Nano powder. Product Code: PIM000032257. | Australia |
| SODIUM FLUOROSILICATE | SODIUM FLUOROSILICATE POWDER UL is used as a fluoridation agent for drinking water. SODIUM FLUOROSILICATE POWDER UL has the key application area in antiseptic of limber industry, moisture absorbent of acid proof cement, opacuefler of glass and porcelain enamel, fluorination treatment of medicine and drinkable water, or in the production of man-made cryolite and sodium fluoride. Group: Specialty chemicals, electronic & specialties. CAS No. 16893- 85- 9. Composition: Sodium silicofluoride. Application: Others. Physical Form: Nano powder. Product Code: PIM000032258. | Australia |
| SODIUM PERSULPHATE - KLOZUR® SP | SODIUM PERSULPHATE - KLOZUR® SP function as an oxidant which produce the the powerful oxidative and reductive creating a multi-radical attack for the rapid destruction of recalcitrant compounds. SODIUM PERSULPHATE - KLOZUR® SP is suitable to use in direct push injection, fixed well injection, soil blending applications. Group: Specialty chemicals, electronic & specialties. CAS No. 7775- 27- 1. Composition: Sodium persulphate. Application: Others, Plant & Crop Protection. Function: ADDITIVES, Oxidant. Physical Form: Nano powder. Product Code: PIM000040702. | Australia |
| SYLOID® 161 | SYLOID 161 is a matting agent from amorphous silica with special organic treatment, appearing as white free flowing powder. SYLOID® 161 is a medium porosity matting agent with appropriate matting efficiency. Due to its favourable particle size and organic treatment, following adequate dispersion it imparts excellent surface properties to the coating film. Key Application: furniture coatings, decorative paints, wood stains, wood coatings, air and oven dried industrial coatings. Group: Specialty chemicals, paints & coatings. Composition: Amorphous Silica. Application: Can, Coil and Industrial, Can, Coil and Industrial, Lamination and Converting, Architectural and Deco. Function: ADDITIVES, Matting Agents. Physical Form: Nano powder. Product Code: PIM000032190. | Australia |
| SYLOID® 234 | SYLOID® 234 Matting Agent is an amorphous silica appearing as white free flowing powder. SYLOID®234 is an inorganically treated, medium porosity matting agent with appropriate matting efficiency and dispersibility. After adequate dispersion it imparts excellent surface properties to the coating film. Key features are: Multifunctional additive, excellent compatible with active ingredients Highly adsorptive as carrier for liquids and actives, up to 1.4 ml of a liquid per gram. It can keep powders dry and free flowing for a more consistent and uniform processing / dosing Can be highly efficient as inactive excipient for improving oral formulations especially of moisture-sensitive pharmaceutical active ingredients. Group: Specialty chemicals, paints & coatings. Composition: Amorphous Silica. Application: CanCoil and Industrial. Function: ADDITIVES, Matting Agents. Physical Form: Nano powder. Product Code: PIM000032191. | Australia |
Our database is helping our users find suppliers everyday.
