Find where to buy products from Australian suppliers, including: distributors, industrial manufacturers, bulk supplies and wholesalers of raw ingredients & finished goods.
Search for products or services, then visit the suppliers website for prices, SDS or more information. You can also view suppliers in NZ, UK or the USA.
| Product | Description | |
|---|---|---|
| Paint & Coatings |  | |
| Paint Oil Grease Remover 500ml | Paint Oil Grease Remover 500ml. Spotters & Treatments |  Victoria (VIC) |
| Able Ecostrip - Paint Remover | ABLE ECOSTRIP is a NON DANGEROUS, NON TOXIC, low VOC, industrial strength ENVIRONMENTALLY RESPONSIBLE paint stripper that effectively removes high performance, architectural & industrial paints & surface coatings. Use as required. Product is: Low VOC. Non-toxic. Non-flammable. Non-caustic. No Methylene Chloride. Professional Strength. Non-Staining Blue Gel. Water based. No NMP. No Harsh odors. Australian Made. MOST paints. Acrylic Paint Stripper. Oil-based Paint Stripper. Water-based. Enamel Paint Stripper. Polyurethane Stripper. Lead Paint Stripper. Concrete Sealer Stripper. Varnish Stripper. Biodegradable Ingredients. Dilutes up to 20%v/v with water to thin for spraying. Pack Sizes: 5 Litre, 20 Litres. Product ID: AC807. Chemicals By Industry, Building & Construction, Chemicals By Industry, Janitorial & Maintenance, Chemicals By Industry, Marine, Chemicals By Industry, Mining, Chemicals By Industry, Workshop. |  Australia Wide |
| Graffiti Remover & Paint Stripper | GRAFFITI REMOVER & PAINT STRIPPER - AC800 is a viscous mobile solvent gel formulated to remove carbon, rubber, resin, paint and varnish from bricks, stone and metal surfaces, including ferrous metals and alloys. Apply a liberal amount of AC800 directly onto the surface with a paint brush. Allow 10-15 minutes contact time for the product to penetrate and soften the coating. Finally, clean the surface by scraping or hosing off with water. Some stubborn coatings and residue films may require a second application of AC800. Dry the surface and apply as before. Pack Sizes: 5 Litre, 20 Litres, 205 Litre Drums. Product ID: AC800. Chemicals By Industry, Brick & Concrete Cleaning, Chemicals By Industry, Building & Construction. | Australia Wide |
| SILFAX R10 - For high temperature paints less 300ºC | Silicone Resins & Coatings for: For high temperature paints less 300ºC. Categories: Silicone Resins & Coatings |  Victoria |
| SILFAX R11 - For high temperature paints less 300ºC | Silicone Resins & Coatings for: For high temperature paints less 300ºC. Categories: Silicone Resins & Coatings | Victoria |
| SILFAX R12 - For high temperature paints less 300ºC | Silicone Resins & Coatings for: For high temperature paints less 300ºC. Categories: Silicone Resins & Coatings | Victoria |
| SILFAX R13 - For high temperature paints less 300ºC | Silicone Resins & Coatings for: For high temperature paints less 300ºC. Categories: Silicone Resins & Coatings | Victoria |
| SILFAX R16 - Paint Additive, surface tension modifier, reduction of pigment float | Silicone Resins & Coatings for: Paint Additives, surface tension modifier, reduction of pigment float. Categories: Silicone Resins & Coatings, Surface Tension Modifiers | Victoria |
| SILFAX R17 - Paint Additive, flow control, increases mar resistance | Silicone Resins & Coatings for: Paint Additives, flow control, increases mar resistance. Categories: Mar Resistant, Silicone Resins & Coatings | Victoria |
| SILFAX R18 - Paint Additive, flow control, compatible with organic polymers | Silicone Resins & Coatings for: Paint Additives, flow control, compatible with organic polymers. Categories: Silicone Resins & Coatings | Victoria |
| SILFAX R5 - Paint additive, wetting aid | Silicone Resins & Coatings for: Paint additives, wetting aid (agents). Categories: Silicone Resins & Coatings | Victoria |
| SILFAX R6 - Paint additive, hammer finish | Silicone Resins & Coatings for: Paint additives, hammer finish. Categories: Silicone Resins & Coatings | Victoria |
| SILFAX R7 - Paint additive, wetting aid | Silicone Resins & Coatings for: Paint additives, wetting aid (agents). Categories: Silicone Resins & Coatings | Victoria |
| SILFAX R8 - Alkyd resin, for high temperature paints less 250ºC | Silicone Resins & Coatings for: Alkyd resin, for high temperature paints less 250ºC. Categories: Silicone Resins & Coatings, Industrial Resins | Victoria |
| SILFAX R9 - Alkyd resin, for high temperature paints less 250ºC | Silicone Resins & Coatings for: Alkyd resin, for high temperature paints less 250ºC. Categories: Silicone Resins & Coatings, Industrial Resins | Victoria |
| 3M GLASS BUBBLES K15 | Glass Bubbles K15 have a density of 0.15 g/cc and an isostatic crush strength of 300 psi. 3M glass bubbles K15 are ideal for use in a variety of water buoyancy applications, including additives in buoys and moorings. Like all 3M glass bubbles, K15 bubbles are compatible thermoset resins like polyurethane and epoxy, and are virtually insoluble in water. Group: Specialty chemicals, paints & coatings. Composition: Soda-lime-borosilicate glass. Application: Architectural and Deco., Adhesives & Sealants, Automotive Paints, Lamination and Converting, Powder Coating, Can, Coil and Industrial. Physical Form: Nano powder. Product Code: PIM000031756. |  Australia |
| 3M GLASS BUBBLES K20 | 3M GLASS BUBBLES. K20 have a density of 0.20 g/cc and an isostatic crush strength of 500 psi. These general purpose spheres have a good strength-to-density ratio and are designed for use in a variety of shallow water (e.g. up to 2,000 feet of sea water) buoyancy applications, as well as emulsion explosives. Group: Specialty chemicals, paints & coatings. Composition: Soda-lime-borosilicate glass. Application: Architectural and Deco., Adhesives & Sealants, Automotive Paints, Lamination and Converting, Powder Coating, Can, Coil and Industrial. Physical Form: Nano powder. Product Code: PIM000031757. | Australia |
| 3M GLASS BUBBLES K25 | 3M glass bubbles K25 ideal additives for shallow water buoyancy applications or processing applications where high strength is needed. In addition, like all 3M glass bubbles, K25 bubbles are compatible with thermoset resins like polyurethane and epoxy, and are virtually insoluble in water. Application: Paints and Coatings, Rubber and Plastic, Transportation. Group: Specialty chemicals, paints & coatings. Composition: Soda-lime-borosilicate glass. Application: Architectural and Deco., Adhesives & Sealants, Automotive Paints, Lamination and Converting, Powder Coating, Can, Coil and Industrial. Physical Form: Nano powder. Product Code: PIM000031758. | Australia |
| 3M GLASS BUBBLES S28HS | Glass Bubbles S28HS are hollow glass spheres with a typical density of 0.28 g/cc and an isostatic crush strength of 3,000 psi. These glass bubbles are designed for numerous applications such as deep water syntactic foams and airless spray coatings. The bubbles produce strong, stable voids with low thermal conductivity, helping the coating achieve the necessary compressive strength. The S28HS Glass Bubbles offer a very good strength-to-density ratio and small particle size, making them suitable for a variety of applications such as buoyancy in oil and gas, airless sprayable paints and coatings, adhesives, mastics, sealants, SMC and other thermoset resin systems. Group: Specialty chemicals, paints & coatings. Composition: Soda-lime-borosilicate glass. Application: Architectural and Deco., Adhesives & Sealants, Automotive Paints, Lamination and Converting, Powder Coating, Can, Coil and Industrial. Physical Form: Nano powder. Product Code: PIM000031760. | Australia |
| 3M STAIN RESISTANT SRA-451 | Stain Resistant Additive and Sealer SRA-451 is a fluorochemical acrylic resin concentrate in ethyl acetate designed for industrial application to porous hard surfaces such as concrete, marble, granite, terracotta, etc. Properly applied, SRA-451 additive imparts excellent and durable water, oil and stain repellent properties as well as dirt pick-up resistance on all types of porous hard surfaces. The substrates natural characteristics are generally unaffected by the application of this product. Be sure to evaluate the 3M product for compatibility in your particular application before using. Group: Specialty chemicals, paints & coatings. Composition: 25% fluoroacrylate polymer in ethyl acetate. Application: Construction, Powder Coating, Can, Coil and Industrial. Physical Form: Liquid. Product Code: PIM000031763. | Australia |
| 3M W-210 CERAMIC MICROSPHERES | 3M W-210. CERAMIC MICROSPHERES are made of alkali alumino silicate ceramic and is one of our smallest high-strength ceramic particles with a typical d90 of 12 microns; it has a controlled particle size distribution. Formulating with these ceramic microspheres allows higher filler loadings while maintaining desired properties such as viscosity control. In addition, these engineered particles are added to many paints and industrial coatings to provide scrub and burnish resistance. Due to their smaller particle size, ceramic microspheres white grade W-210 are typically chosen over other ceramic microspheres for higher gloss formulations. Formulators may be able to extend resin in their formulation by adding 3M ceramic microspheres and potentially reduce cost. Group: Specialty chemicals, paints & coatings. Composition: Alkali Alumino Silicate Ceramic. Application: Architectural and Deco., Can, Coil and Industrial. Physical Form: Nano powder. Product Code: PIM000031764. | Australia |
| Find where to buy chemicals in Australia | Search our extensive list of Australian chemical suppliers. Products include: essential oils; alcohols; paints; coatings; solvent suppliers; food & pharmaceuticals; greases; cleaning products & pool chemical supplies Australia; cosmetic & personal care; lubricants; flame retardants; specialty chemicals; school chemical supplies; reagents; herbicides; fertilisers; pigments; hospitality chemicals; farm & dairy chemicals; safety and spill equipment. find manufacturers, distributors, retail and bulk wholesale suppliers for all of your chemical companies purchasing requirements. | |
| Able Ecosoak | ABLE ECOSOAK & STRIP requires no special heating or agitation and works like magic. For use in a SOAK BATH operation. It is a NON DANGEROUS, low VOC, industrial strength ENVIRONMENTALLY RESPONSIBLE soak tank paint stripper that effectively removes high performance, architectural & industrial paints & surface coatings. ABLE ECOSOAK & STRIP will successfully remove multiple coats of most oil-based coatings, water-based coatings, varnishes, acrylics, urethanes, polyurethanes, epoxies, inorganic zincs, elastomeric coatings and specialty marine coatings. This product is considered safe for use on most surfaces such as wood, brick, stone, concrete and metals. Pack Sizes: 20 Litres. Product ID: AC808. Chemicals By Industry, Automotive, Chemicals By Industry, Building & Construction, Chemicals By Industry, Marine, Chemicals By Industry, Mining, Chemicals By Industry, Workshop. | Australia Wide |
| Able Ecostrip | Paint remover & stripper - Non Dangerous. Uses: Paint stripper. Group: Paint stripper. Grades: Non DG. Pack Sizes: 5L, 20L. Product ID: AC807. | Australia Wide |
| Ablesan Surface Sanitiser | Ablesan is a spray-on-leave on sanitiser concentrate based on stabilised hydrogen peroxide that is known to kill 99.99% of germs and bugs. Ideal for general surface sanitisation in all homes and workplaces including food areas via sprayer, fogger or soak application. Dilute to 10% with potable water on most surfaces that are not harmed by water alone. Recommended to discard of made up solutions within 30 days of diluting. Store product in original container in an upright position, in a cool environment out of direct sunlight. *Tip to efficiently treat large areas with the 10% Solution of Ablesan such as offices, vehicle cabins, or common work areas use airless paint sprayers, fogger unit or pump up type weed sprayers. . Pack Sizes: 5 Litre, 20 Litres. Product ID: AC256. Chemicals By Industry, Aged Care, Chemicals By Industry, Food & Beverage Processing, Chemicals By Industry, Hospitality, Chemicals By Industry, Kitchen, Chemicals By Industry, Pools & Recreation. | Australia Wide |
| ABSOLUTE - Alkaline water based degreaser, biodegradable. | Heavy Duty Industrial Cleaners. pH of about 9.5 so it can damage old paint or weaker fabrics. Boosted with Butyl Icinol. Because it is water based and built on totally biodegradable surfactants it meets the Australian standard for Biodegradability. USED IN: Degreasing engine bays, Cleaning of soot & carbon from most fibreglass and painted surfaces, Chassis Cleaner, Emulsifying grease and oil prior to discharge, Removal of fat & grease from kitchens, Dissolving body fat build up in bathrooms, Emulsifying grease and fat in ducts and piping systems. Distributors of WHOLESALE CHEMICALS & CLEANING PRODUCTS to the Far North Queensland region including the Atherton Tablelands the Cape & Thursday Island. Categories: Degreasing, Industrial and Commercial Cleaning |  Cairns, Queensland QLD |
| A-C 330 | A-C 330 is a hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion resistance by lowering the coefficient of friction. In textiles, can help improve sewability and fabric cutting, extending cutting machine lifetime. Its acid number is 30, which allows it to be emulsified into water. Can also provide heat resistance to hot melt adhesives (HMAs). Group: Specialty chemicals, polymers, paints & coatings. CAS No. 68441-17-8. Composition: OPE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Can, Coil and Industrial. Function: Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007921. | Australia |
| A-C 405M | A-C 405M is an ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 8%, for use in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 24937-78-8. Composition: EVA WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Automotive Paints. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007909. | Australia |
| A-C 405T | A-C 405T is an ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 6%, for use in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 24937-78-8. Composition: EVA WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Automotive Paints. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007911. | Australia |
| A-C 6 | A-C 6 is a low density polyethylene (LDPE) homopolymer in a prill form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. Can also be partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. Used in cable flooding compounds, along with polybutene. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 9002-88-4. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Adhesives & Sealants. Function: Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.1~2%. Certification: REACH. Product Code: PIM000007910. | Australia |
| A-C 629 | A-C 629 is a low density Oxidized Polyethylene (LDOxPE) homopolymer in prill form for use in solvent borne coatings as a rheological aid. It also finds use as a metal release agent in PVC. It can also be atmospherically emulsified for use in aqueous applications, such as textiles, lubricants, coatings and inks, to lower the COF and provide surface properties such as mar & abrasion resistance and increased slip. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 68441-17-8. Composition: OPE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Others. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007914. | Australia |
| A-C 680 | A-C 680 is low density Oxidized Polyethylene (LDOxPE) homopolymer in prill form for use in solvent borne coatings as a rheological aid. It can also be atmospherically emulsified for use in aqueous applications, such as textiles, lubricants, coatings and inks, to lower the COF and provide surface properties such as mar &, abrasion resistance and increased slip. It can also be used as an anti transpirant coating to delay fruit spoilage allowing longer storage and transport times. It also finds use as a metal release agent in PVC. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 68441-17-8. Composition: OPE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Others. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 2.0%. Certification: REACH. Product Code: PIM000007927. | Australia |
| A-C® 6A | A-C® 6A is a homopolymer in a powdered form; for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. A-C® 6A can be also partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. Used in cable flooding compounds, along with polybutene. Is used as a dispersing agent in color masterbatch applications. Group: Specialty chemicals, polymers, paints & coatings. CAS No. 9002-88-4. Composition: Low Density Polyethylene. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Powder Coating, Printing Inks. Function: Waxes, Dispersing Agents, POLYMERS, Polystyrene (PS). Physical Form: Micronized Powder. Recommended Dosage: 0.1~2%. Certification: REACH, Food Contact, PICCS. Product Code: PIM000007906. | Australia |
| ACETONE | ACETONE is a clear, colourless, low boiling easy pouring liquid with a sweetish odour, and is highly flammable and completely soluble in water, alcohols, and other organic liquids. ACETONE is used mostly for solvent application, as well as an ingredient to produce MMA, MIBK Bisphenol-A. Group: Specialty chemicals, paints & coatings. CAS No. 67-64-1. Composition: 2-propanone, dimethyl ketoneDMK. Application: Architectural and Deco., Automotive Paints. Function: SOLVENTSOther. Physical Form: Liquid. Product Code: PIM000060293. | Australia |
| Acid Detergent - AC518X | ACID DETERGENT AC518X is for sale to POISONS LICENSE HOLDERS ONLY. This product is used for etching aluminum and steel boat hulls prior to painting by professional boat painter. Also used for brick cleaning and brightening aluminum & stainless steel. Removing surface rust, red dust and bore water stains. For inquiries or assistance in selecting the right form, please contact the Pharmaceutical Services Branch via email to poisons@health.wa.gov.au or call 9222 6883. Why do you need to etch metal on boat hulls before respraying. If metal is not etched correctly paint jobs will not last properly, always use a professional boat painter. Pack Sizes: 5 Litre, 20 Litres. Product ID: AC518X. Chemicals By Industry, Marine, Chemicals By Industry, Workshop. | Australia Wide |
| Acrysol ASE-60 | ACRYSOL ASE-60 by DOW is an APEO-free*, solvent-free* acid-containing, alkali-soluble emulsion (ASE) thickener for paint and latex coatings. When neutralized with a base such as sodium hydroxide or TEA, this product effectively increases low-shear (Brookfield) viscosity to deliver coatings with highly shear-thinning characteristics. This product is delivered as a high-solids liquid for ease of handling in manufacturing. Interior and exterior paints. Wide range of sheen through high gloss paints, including low-VOC formulations. Water-based architectural and industrial coatings. Utility with all binder types. Additive Applications. Exterior Insulation Finish Systems (EIFS). Paint/coatings. Paper. Textiles. Paper processing and finishing. Building and Construction. Nonwoven binders. General industrial finishes. Art conservation applications. Water-based industrial baking enamels. Benefits. Broad formulation latitude. Ease of handling. Use over a wide pH range. Reduced levels required for comparable rheology. Improved gloss development versus HEC. Most offerings ideal for low VOC formulations. Pack Sizes: 20 Litres, 200 Litre, 1000 Litres. Product ID: RM0180. Chemicals By Industry, Building & Construction, Chemicals By Industry, Chemicals By Industry, Universal Products. | Australia Wide |
| ACUMIST A-12 | ACUMIST A12 is Micronized Oxidized Polyethylene Homopolymer for use in water based coatings, flexographic and gravure inks and overprint varnishes. It also can be used as a processing aid, matting and antissetling agent in paints. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 68441-17-8. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Adhesives & Sealants. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.5~1%. Certification: REACH. Product Code: PIM000007936. | Australia |
| ACUMIST C-5 | ACUMIST C-5 is medium particle size micronized Polyethylene Homopolymer for use in solvent borne coatings and solvent based flexographic inks. As with all ACumist products, it is insoluble in solvents and UV based monomers and oligomers at room temperature. best suited goroffset inks, can coatings , and all thin film solvent based coatings. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 68441-17-8. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Adhesives & Sealants. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.5~1%. Certification: REACH. Product Code: PIM000007930. | Australia |
| ACUMIST D-6 | ACUMIST D-6 is micronized Polyethylene Homopolymer for use and general purpose solvent borne coatings, stains and lacquers, and gravure inks. It provides a good balance of properties where economics are of paramount concern. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 68441-17-8. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Adhesives & Sealants. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.5~1%. Certification: REACH. Product Code: PIM000007933. | Australia |
| ACUMIST D-9 | D-9 Micronized Polyethylene Homopolymer for use general purpose solvent borne coatings, stains and lacquers, and gravure inks. It provides a good balance of properties where economics are of paramount concernMostlu used in Gravure inks for slip and rubs. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 68441-17-8. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Adhesives & Sealants. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.5~1%. Certification: REACH. Product Code: PIM000007934. | Australia |
| ACUMIST P-10 | ACUMIST P10 is micronized polypropylene for matting and non-skid or non-slip applications for industrial solvent coatings. Excellent abrasion resistance. Used in Powder Coating for matting and scratch resistance. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 68441-17-8. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Adhesives & Sealants. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.5~1%. Certification: REACH. Product Code: PIM000007935. | Australia |
| A-C X 1946 | Ethene, homopolymer, used in painting and powder painting, good transparancy, flatting agent, good abrasion performance and hand feeling, improving demould. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 9002-88-4. Composition: Ethene, homopolymer. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Automotive Paints. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007938. | Australia |
| AH-2090BA | AH-2090BA is used as a hardener for two-component hardener. It features weather resistance and flexibility. Some of its applications are on heavy duty protective coating, wood, metal, plastic, synthetic leather, adhesive and film coating. Group: Specialty chemicals, paints & coatings. CAS No. 28182-81-2, 123-86-4, 822-06-0. Composition: 1,6-Diisocyanatohexane homopolymer, n-Butyl acetate, Hexamethylene Diisocyanate. Application: CanCoil and Industrial. Function: BINDERS, Polyisocyanates, ADDITIVES, Catalysts - Crosslinkers. Physical Form: Liquid. Certification: PICCS. Product Code: PIM000048238. | Australia |
| AH-4075PX | AH-4075PX is used as a hardener for two-component hardener. It features weather resistance and flexibility. Some of its applications are on heavy duty protective coating, wood, metal, plastic, synthetic leather, adhesive and film coating. Group: Specialty chemicals, paints & coatings. CAS No. 28182-81-2, 1330-20-7, 108-65-6, 822-06-0. Composition: 1,6-Diisocyanatohexane homopolymer, Xylene, Propylene glycol methyl ether acetate, Hexamethylene Diisocyanate. Application: CanCoil and Industrial. Function: BINDERS, Polyisocyanates, ADDITIVES, Catalysts - Crosslinkers. Physical Form: Liquid. Certification: PICCS. Product Code: PIM000048237. | Australia |
| AKOLITE AS-5900-70 | AKOLITE AS-5900-70 is made from oil modified alkyd polyol, which display the great feature of good drying function. AKOLITE AS-5900-70 is commonly used in a general purpose in coating. Group: Specialty chemicals, paints & coatings. CAS No. 66070-61-9, 1330-20-7. Composition: Soybean oil polymer with phthalic anhydride and glycerol & Xylene. Application: Lamination and Converting, Construction, Can, Coil and Industrial, Architectural and Deco. Function: ADDITIVESOther. Physical Form: Liquid. Product Code: PIM000039192. | Australia |
| ALBAWHITE 70 | ALBAWHITE 70 is a German madenatural barium sulfate concentrate, ALBAWHITE 70 is a good dispersable extender. ALBAWHITE 70 offers a list of great benefits and properties; as resistant to acids and alkalis, insoluble in water and organic solvents, lightfast and weatherproof, high brightness, colour neutral due to low refractive index, extremely low electrical conductivity, low binder demand & low abrasiveness due to low silica content. ALBAWHITE 70 is suitable for anti-corrosive paints & facade paints, powder coatings, adhesives & sealants, and plastics production. Group: Specialty chemicals, paints & coatings. Composition: Barium sulphate concentrates. Application: Powder Coating, Automotive Paints, Adhesives & Sealants. Function: ADDITIVES, Dispersing Agents. Physical Form: Nano powder. Product Code: PIM000034637. | Australia |
| Alkaline Cleaning Powder | ALKALINE CLEANING POWDER is an off-white powder with a pine odour and is formulated to remove paint, carbon, oils, grease and other obstinate soils from copper and ferrous metal. Use via soak tank method. ALKALINE CLEANING POWDER should be mixed slowly into cold water. Agitate to make sure all product is thoroughly dissolved. The bath should be constructed of mild steel and have a drain at the bottom of the tank to make dislodging and draining easier. Alloys and amphoteric metals cannot be used in this bath as they will react and seriously impair the solution performance. ALKALINE CLEANING POWDER should be used at 100gms per litre of water at 80 °C if possible. Parts should be immersed the solution and agitated if an agitator is fitted to the bath. Parts should be rinsed with water to flush away residual product after removing from the bath. Use 100 to 200gms of the product to a litre of water if a cold and still bath is necessary. NOTE: Plan the bath to completely immerse the parts that need cleaning. The bath can be used repeatedly until it is completely attenuated. Pack Sizes: 10KG. Product ID: AC637. Chemicals By Industry, Workshop. | Australia Wide |
| Alkaline Decarboniser Powder | ALKALINE DECARBONISER POWDER is an off-white, heavy duty powder concentrate formulated to remove carbon, oils, fats, greases, paint and other obstinate soils from stainless steel, ferrous metals, fibre reinforced plastic, EPD, LDPE, HDPE AND copper. Use via soak tank method. Pack Sizes: 5KG, 20KG, 25KG Bag. Product ID: AC639. Chemicals By Industry, Automotive, Chemicals By Industry, Mining, Chemicals By Industry, Workshop. | Australia Wide |
| ANOX 20 POWDER | ANOX 20 is a phenolic antioxidant stabilizer is a high molecular weight hindered phenolic antioxidant that provides very low volatility and excellent resistance to extraction from polymer compounds. ANOX 20 is particularly effective against polymer degradation during long-term aging. It is also very effective as a process stabilizer. ANOX 20 exhibits good resistance to discoloration at the high temperatures that are encountered in thermoplastic polymer processing. Please see the specification sheet below and for further details contact our local sales representative today. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 6683-19-8. Composition: Tetrakismethylene (3,5-di-t-butyl-4-hydroxyhydrocinnamate) methane. Application: Adhesives & Sealants, Thermoplastic Transformers. Function: ADDITIVES, Antioxidants, Stabilisers. Physical Form: Micronized Powder. Product Code: PIM000050175. | Australia |
| ANOX BB011 | ANOX BB011 is a stabilizer blend a family of solid binary synergistic blends used to protect polymers during processing and long-term aging. ANOX BB011 and ANOX BB021 stabilizer blends with a combination of a high molecular weight hindered phenol: ANOX 20 stabilizer, and a phosphite: ALKANOX 240 phosphite, provide excellent protection in polyolefins. The low volatility of the ANOX 20 stabilizer and ALKANOX 240 phosphite allows the blends to be used at relatively high temperatures while providing excellent resistance to extraction from polymer compounds. The blends are active during polymer processing and provide excellent stabilization against thermo-oxidative degradation during long term aging. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 6683-19-8, 31570-04-4. Composition: Benzenepropanoic acid, 3,5-bis(1,1- dimethylethyl)-4-hydroxy-2,2bis[[3- [3,5-bis(1,1-dimethylethyl)-4- hydroxyphenyl]-1-oxo propoxy] methyl]-1,3-propanediyl ester Phenol2,4-bis(1,1dimethylethyl)phosphite (3:1). Application: Adhesives & Sealants. Function: ADDITIVESAntioxidants. Physical Form: Micronized Powder. Product Code: PIM000061930. | Australia |
| ANTI SKINNING AGENT MEKO | ANTI SKINNING AGENT MEKO is an auxiliary drier for alkyd coating. Group: Specialty chemicals, paints & coatings. Composition: Methyl Ethyl Kitoxime. Application: Architectural and Deco., Can, Coil and Industrial. Function: Driers. Physical Form: Liquid. Product Code: PIM000008712. | Australia |
| ANTKOTE 2025 | ANTKOTE 2025 is a hydroxyfunctional polyacrylic dispersion designed for anticorrosion coating. In combination with polyisocyanates or other crosslinkers, it can be used for tow-component coating. It also can be used for one component baking coating with amino resins or blocked polyisocyanates. Approx. 43% in water/1-butoxy-2- propanol/Diethylene glycol monobutyl ether, approx. 48:3.5:3.5. Neutralizing agent, N,N-dimethyl ethanolamine(<2wt%), bound as a salt. Group: Specialty chemicals, paints & coatings. Composition: OH Functional Acrylic. Application: Printing Inks, Architectural and Deco., Can, Coil and Industrial, Automotive Paints. Function: BINDERS, Polyurethan Dispersions. Physical Form: Dispersion. Certification: REACH. Product Code: PIM000007461. | Australia |
| ANTKOTE 2033 | ANTKOTE 2033 is a hydroxyfunctional polyacrylic dispersion designed for machinery, vehicle, and anticorrosion coating. In combination with polyisocyanates or other crosslinkers, it can be used for two-component coating. It also can be used for one component baking coating with amino resins or blocked polyisocyanates. Approx. 46% in water/solvent naphtha 100/2-butoxy ethanol, approx. 44:4:4. Neutralizing agent, N,N-dimethyl ethanolamine(<2wt%), bound as a salt. Group: Specialty chemicals, paints & coatings. Composition: OH Functional Acrylic. Application: Printing Inks, Architectural and Deco., Can, Coil and Industrial, Automotive Paints. Function: BINDERS, Polyurethan Dispersions. Physical Form: Dispersion. Certification: REACH. Product Code: PIM000007462. | Australia |
| ANTKOTE 2035 | ANTKOTE 2035 is a hydroxyfunctional polyacrylic dispersion designed for vehicle, machinery and anticorrosion coating. In combination with polyisocyanates or other crosslinkers, it can be used for tow-component coating. It also can be used for one component baking coating with amino resins or blocked polyisocyanates. Approx. 43% in water/1-butoxy-2-propanol, approx. 47.5:7.5. Neutralizing agent, N,N-dimethyl ethanolamine(<2wt%), bound as a salt. Group: Specialty chemicals, paints & coatings. Composition: OH Functional Acrylic. Application: Printing Inks, Architectural and Deco., Can, Coil and Industrial, Automotive Paints. Function: BINDERS, Polyurethan Dispersions. Physical Form: Dispersion. Certification: REACH. Product Code: PIM000007463. | Australia |
| ANTKOTE 2042 | ANTKOTE 2042 is a hydroxyfunctional polyacrylic dispersion designed for vehicle, machinery and anticorrosion coating. In combination with polyisocyanates or other crosslinkers, it can be used for tow-component coating. It also can be used for one component baking coating with amino resins or blocked polyisocyanates. Approx. 46% in water/solvent naphtha 100/1-butoxy-2-propanol, approx. 44:4:4. Neutralizing agent, N,N-dimethyl ethanolamine(<2wt%), bound as a salt. Group: Specialty chemicals, paints & coatings. Composition: OH Functional Acrylic. Application: Printing Inks, Architectural and Deco., Can, Coil and Industrial, Automotive Paints. Function: BINDERS, Polyurethan Dispersions. Physical Form: Dispersion. Certification: REACH. Product Code: PIM000007464. | Australia |
| ANTKOTE® 2043 | ANTKOTE® 2043 is a hydroxyfunctional polyacrylic dispersion designed for general industrial baking coating. In combination with amino resins or blocked polyisocyanates, it can be used for high-performance waterborne baking coating. It also can be used for waterborne two-component coating with polyisocyanates or other crosslinkers. Group: Specialty chemicals, paints & coatings, polymers. Composition: Hydroxyfunctional polyacrylic dispersion. Application: Architectural and Deco., Can, Coil and Industrial. Function: BINDERS, Polyurethan / Polyaspartics. Physical Form: Dispersion. Product Code: PIM000042427. | Australia |
| ANTKOTE 2365 | ANTKOTE 2365 is a water soluble hydroxyl acrylic copolymer designed for glass baking coatings. Combined with amino resins, it can be used for high-performance applications, like wine bottles and other glassworks. Approx. 50% in water/ alcohol/ diethylene glycol butyl ether, neutralized with 2-dimethylethanolamine, ratio approx. 19:13:13:5. Group: Specialty chemicals, paints & coatings. Composition: OH Functional Acrylic. Application: Printing Inks, Architectural and Deco., Can, Coil and Industrial, Automotive Paints. Function: BINDERS, Polyurethan Dispersions. Physical Form: Liquid. Certification: REACH. Product Code: PIM000007465. | Australia |
| ANTKOTE 2367 | ANTKOTE 2367 is a water soluble hydroxyl acrylic copolymer designed for amino glass baking coatings. It can be for surface finishing of wine bottle glass, decorative glass, glass for cosmetics and other glass of high-performance requirements paired with amino resins. Approx. 50 % in water/ alcohol /2-butoxyethanol, neutralized with dimethylethanolamine, approx. 15.5:7:23:4.5. Group: Specialty chemicals, paints & coatings. Composition: OH Functional Acrylic. Application: Printing Inks, Architectural and Deco., Can, Coil and Industrial, Automotive Paints. Function: BINDERS, Polyurethan Dispersions. Physical Form: Liquid. Certification: REACH. Product Code: PIM000007466. | Australia |
| AOX52 | AOX52 is a highly concentrated, free flowing powder with strong antimicrobial activities. It can be added to different kinds of paints and lacquers (water based, solvent based, solvent free) as well as to thermoplastic materials (PP, PE, TPU, PU, ABS, PA etc.). Group: Specialty chemicals, polymers, paints & coatings. Composition: Powder with strong antimicrobial activities. Application: Can, Coil and Industrial, Masterbatch & Compounders, Medical Application, Powder Coating, Rubber & Elastomers. Function: ADDITIVESBiocides. Physical Form: Micronized Powder. Product Code: PIM000009014. | Australia |
| AQUOLIN 163 | AQUOLIN 163 is a water dispersible polyisocyanate based on hexamethylene diisocyanate (HDI). In combination with waterborne polymer dispersions (such as polyurethane, polyacrylate and polyvinyl acetate) and waterborne polyol, it can be used for water-borne coatings and adhesive. Group: Specialty chemicals, paints & coatings. Composition: Polyisocyanate. Application: Printing Inks, Architectural and Deco., Can, Coil and Industrial, Automotive Paints. Function: BINDERS, Polyurethan Dispersions. Physical Form: Liquid. Certification: REACH. Product Code: PIM000007467. | Australia |
| AQUOLIN 268 | AQUOLIN 268 is water dispersible HDI isocyanate, used as curing agents for areas such as textiles, adhesives and industrial coatings, and can also be used as additives to improve the performance of waterborne coatings. Group: Specialty chemicals, paints & coatings. Composition: Hydrophilic aliphatic Polyisocyanate. Application: CanCoil and Industrial. Function: ADDITIVES, Catalysts - crosslinkers. Physical Form: Liquid. Certification: REACH. Product Code: PIM000005644. | Australia |
| AQUOLIN 269 | AQUOLIN 269 is a water dispersible polyisocyanate based on hexamethylene diisocyanate (HDI). In combination with waterborne polyurethane, polyacrylate, etc., it can be used for water-borne coatings and adhesives. After addition of Aquolin ® 269, the ready-to-use mixture must be used within the pot life. Group: Specialty chemicals, paints & coatings. Composition: Polyisocyanate. Application: Printing Inks, Architectural and Deco., Can, Coil and Industrial, Automotive Paints. Function: BINDERS, Polyurethan Dispersions. Physical Form: Liquid. Certification: REACH. Product Code: PIM000007468. | Australia |
| AQUOLIN 270 | AQUOLIN 270 is a water dispersible polyisocyanate based on hexamethylene diisocyanate (HDI). In combination with waterborne polyurethane, polyacrylate, etc., it can be used for water-borne coatings and adhesives. Group: Specialty chemicals, paints & coatings. Composition: Hydrophilic aliphatic Polyisocyanate. Application: Can, Coil and Industrial, Printing Inks, Adhesives & Sealants, Construction, Automotive Paints, Fibers, Textiles & Films. Function: Catalysts - crosslinkers. Physical Form: Liquid. Certification: REACH. Product Code: PIM000008982. | Australia |
| AQUOLIN 278 | AQUOLIN 278 can be used in combination with various hydroxyl-functionalized dispersions to formulate aqueous 2k coatings as crosslinker. It has excellent water dispersion and mat effect. Group: Specialty chemicals, paints & coatings. Composition: Hydrophilic aliphatic Polyisocyanate. Application: CanCoil and Industrial. Function: ADDITIVES, Catalysts - crosslinkers. Physical Form: Liquid. Certification: REACH. Product Code: PIM000005645. | Australia |
| ARCHSOL® 8016 | ARCHSOL® 8016 is an anionic styrene acrylic copolymer emulsion designed for exterior elastomeric coatings. Relying on its special molecular structure, Archsol® 8016 offers excellent mechanical property, prominent early water resistance and alkali resistance. Neutralizer: <1% ammonia water. Biocide: (CMIT:MIT) 0.049, MIT 0.240. ARCHSOL® 8016 also offer the following properties: 1. APEO-free, no formaldehyde added. 2. Excellent mechanical property, prominent elongation in low temperature. 3. Excellent alkali resistance and mechanical property retention in alkaline conditions. 4. Outstanding early water resistance. Group: Specialty chemicals, paints & coatings. CAS No. 068698-67-9. Composition: Acrylic Copolymer Emulsion. Application: Architectural and Deco. Function: Acrylic Emulsions. Physical Form: Emulsion. Product Code: PIM000023242. | Australia |
| ARCHSOL® 8039 | ARCHSOL® 8039 is an anionic styrene acrylic copolymer emulsion designed for interior and exterior flat paint. It offers excellent scrub resistance, water resistance and alkali resistance. Neutralizer: ammonia water <1%. Biocide: (CMIT:MIT=3:1) 0.049 and MIT 0.240. ARCHSOL® 8039. also offers the following properties: 1. APEO-free, no formaldehyde added. 2. Excellent water resistance and alkali resistance. 3. Good thickening response. 4. Low coalescent demand. Group: Specialty chemicals, paints & coatings. CAS No. 068698-67-9. Composition: Acrylic Copolymer Emulsion. Application: Architectural and Deco. Function: Acrylic Emulsions. Physical Form: Emulsion. Product Code: PIM000023247. | Australia |
| ARCHSOL® 8061 | ARCHSOL® 8061 is an anionic pure acrylic emulsion designed for exterior wall paint. It exhibits outstanding dirt pick-up resistance, excellent early water resistance and good colorant compatibility. Key Benefits: - Good gloss stability. - Excellent durability. - Good early water resistance. - Good adhesion after immersed in water. Group: Specialty chemicals, paints & coatings. Composition: Anionic pure acrylic. Application: Architectural and Deco. Function: Acrylic Emulsions. Physical Form: Emulsion. Product Code: PIM000023244. | Australia |
| ARCHSOL® 8087 | ARCHSOL®. 8087 is a nano size pure acrylic emulsion exclusively used for the continuous phase of waterborne multi-color paint. It offers outstanding compatibility with laponite. Paint made with. ARCHSOL® 8087 keeps lasting viscosity stability. Neutralizer: <1% ammonia water. Biocide: (CMIT: MIT=3:1) 0.049, MIT 0.240. Group: Specialty chemicals, paints & coatings. Application: Architectural and Deco. Function: BINDERSAcrylic Emulsions. Physical Form: Emulsion. Product Code: PIM000051381. | Australia |
| ARCHSOL® 8210 | Archsol® 8210 is an APEO-Free and environmental friendly anionic acrylic polymer emulsion that appears in a milky white liquid. Archsol® 8210 offers excellent penetrability, alkali resistance and salting-out resistance that is suitable for the formulation of high-performance primer coatings. Group: Specialty chemicals, paints & coatings. CAS No. 068698-67-9. Application: Architectural and Deco., Construction. Function: BINDERSAcrylic Emulsions. Physical Form: Emulsion. Product Code: PIM000043475. | Australia |
Our database is helping our users find suppliers everyday.
