Find where to buy products from Australian suppliers, including: distributors, industrial manufacturers, bulk supplies and wholesalers of raw ingredients & finished goods.
Search for products or services, then visit the suppliers website for prices, SDS or more information. You can also view suppliers in NZ, UK or the USA.
| Product | Description | |
|---|---|---|
| AVANION 13 | AVANION 13 is specially designed for applications in polyether based polyurethanes. AVANION solutions for PU are powerful antistatic agents, based on a complex dispersion of ionic conductors in polyglycols, specially designed to generate ESD/antistatic systems. They are good for colour formulations, stable in the time and does not alter the original material mechanical properties (shore, bending module, traction, etc.). Group: Specialty chemicals, polymers. Composition: Antistatic agent. Application: Rubber & Elastomers, Masterbatch & Compounders. Function: Antistatic additives. Physical Form: Dispersion. Product Code: PIM000007251. |  Australia |
| AVANION 5 | AVANION 5 is specially designed for applications in polyether and polyester based polyurethanes. AVANION solutions for PU are powerful antistatic agents, based on a complex dispersion of ionic conductors in polyglycols, specially designed to generate ESD/antistatic systems. They are good for colour formulations, stable in the time and does not alter the original material mechanical properties (shore, bending module, traction, etc.). Group: Specialty chemicals, polymers. Composition: Antistatic agent. Application: Rubber & Elastomers, Masterbatch & Compounders. Function: Antistatic additives. Physical Form: Dispersion. Product Code: PIM000007250. | Australia |
| CARADOL SC46-28 | CARADOL SC46-28 is a low VOC and amine free polyether polyol to produce high resilience flexible polyurethane slab-stock foams. It is especially designed for production of higher resilience foam utilizing foam processing techniques similar to conventional slab-stock foaming, and with use of conventional slab-stock silicones, catalysts and additives. It is designed to give high resilient foam with significantly improved foam compression set and porosity. It has a wide processing tolerance over a normal density and hardness range. Performance testing should be conducted before the product is used or brought into contact with HR systems based on EO tipped polyols. This includes diluting catalysts for HR foaming with this polyol or mixing this product with other slab polyols before it is used or brought into contact with HR systems based on EO tipped polyols. Group: Specialty chemicals, polymers. CAS No. 9082-00-2. Composition: Polyalkylene glycol. Application: Thermoplastic Transformers, Thermosets & Composites. Function: POLYMERSOther. Physical Form: Liquid. Product Code: PIM000074470. | Australia |
| CARADOL SC48-08 | CARADOL SC48-08 is a low monol, low VOC polyether polyol for the production of flexible polyurethane slabstock foams. CARADOL SC48-08 is especially suited for the manufacture of foams used in applications where yellowing in contact with textiles or glass fogging has to be avoided. It has a wide processing tolerance over a normal density and hardness range. This includes diluting catalysts for HR foaming with this polyol or mixing this product with other slab polyols before it is used or brought into contact with HR system. Please see the specification sheet below and for further details contact our local sales representative today. Group: Specialty chemicals, polymers. CAS No. 51-79-6. Composition: Urethane. Application: Rubber & Elastomers, Polymer Producers. Function: POLYMERSOther. Physical Form: Liquid. Product Code: PIM000045463. | Australia |
| EASTMAN HYDROQUINONE PHOTO. GRADE | EASTMAN HYDROQUINONE PHOTO. GRADE is used as a good general-purpose inhibitor, stabilizer, antioxidant, and intermediate. EASTMAN HYDROQUINONE PHOTO. GRADE can be used for the applications in agriculture intermediates, Case and carton closures, Dyes/pigments/paints, Flame retardants, Graphic arts, Herbicides - intermediate for other, Intermediates, Kitchen & bath, Methyl methyl acrylate (MMA), Molding & trim interior, Paints & coatings, Peek (polyether ether ketone) Photographic chemicals, Photographic supplies, Polymer modification, Polymer processing, Process solvents, Resins, Rubber modification, Specialty chemicals, Water treatment industrial. Group: Specialty chemicals, electronic & specialties, paints & coatings, polymers. Composition: Hydroquinone. Application: Rubber & Elastomers, Powder Coating, Architectural and Deco., Automotive Paints, Others, Fibers, Textiles & Films, Fibers, Textiles & Films. Physical Form: Solid. Product Code: PIM000035965. | Australia |
| GT450 | GT450 is a glycerine-based polyether polyol of low viscosity and is normally used as a blending polyol in rigid foam formulations. GT450 displays a good combination of processability, cost economics, and properties of the final product for the formulator. GT450 is commonly used in the insulation of refrigerators, buildings, cold stores, etc. Also used in blends for PIR foams. Group: Specialty chemicals, polymers. CAS No. 25791-96-2. Composition: Poly (propyleneoxy) glycerol. Application: Polymer Producers. Function: POLYMERS, Polymer Producers/Rheology modifier. Physical Form: Liquid. Product Code: PIM000039544. | Australia |
| PEBAX® 3533 SP 01 | PEBAX® 3533 SP 01 is Polyether block amide also is a thermoplastic elastomer made of flexible polyether and rigid polyamide. This SP grade has been developed to be heat and UV resistant. Its key application are Flexible injected parts, High performance power transmission belts, Silent gears and Toy component. Group: Specialty chemicals, polymers. Composition: Polyether and rigid polyamide. Application: Thermoplastic Transformers. Function: ADDITIVES, Other. Physical Form: Solid. Product Code: PIM000031732. | Australia |
| RHEOLATE® PHX 7025 | RHEOLATE® PHX 7025 is a high efficiency polyether polyurethane thickener developed for use in aqueous systems. The product is supplied as a white free flowing powder and enables formulations of odourless paints free of organic solvent. and other certificates. The product is suitable for anti asthma and anti allergy paints. Group: Specialty chemicals, paints & coatings, polymers. Composition: Hydrophobic Urethane Polymer. Application: Adhesives & Sealants, Architectural and Deco., Fibers, Textiles & Films, Printing Inks. Function: ADDITIVESRheology Modifiers. Physical Form: Solid. Product Code: PIM000074925. | Australia |
| Silaplane FM-0411P | Silaplane FM-04 series, including Silaplane FM-0411P with a Molecular Weight (Mn) of 1000, can react with urethane resins and polyesters to impart the excellent properties of silicone to various organic resins. As a result, Silaplane can be used as a raw material for polymers, filler dispersants, and surface treatment agents. Group: Specialty chemicals, electronic & specialties, paints & coatings, polymers. CAS No. 207308-30-3, 191920-47-5. Composition: Reactive silicone. Application: Adhesives & Sealants, Architectural and Deco., Automotive Paints, Construction, Electronic Chemicals, Fibers, Textiles & Films, Lamination and Converting, Masterbatch & Compounders, Polymer Producers, Powder Coating, Printing Inks, Rubber & Elastomers, Thermosets & Composites, Thermoplastic Transformers. Function: Adhesion Promoters, Anti-Graffiti, Antiscratch, Coupling Agents / Chain extenders, Dispersing Agents, Intermediates & Accelerators, Optical Materials, Other, Reagents, Rheology Modifiers, Semiconductor Materials, Surface Modifiers - Defoamers, Water Repellents, Acrylic Dispersions, Acrylic Emulsions, Acrylic Resins, Amino - Melamine - Urea Resins, Epoxy Resins, Phenolic Resins, Polyamide, Polyisocyanates, Polyurethane / Polyaspartics, Polyurethane Dispersions, Redispersable Powder, SBR Emulsions, Silane Terminated Polyethers, Silicone Resins, Styrene-Acrylic Dispersions, UV Binders and Oligomers, Vinyl Resins, Complex Inorganic Pigments, Functional Dyes, Iron Oxide, TiO2 (Titanium Dioxide), POLYMERS, Polymer Producers/Rheology modifier, SBR, Silicone Rubber, TPU, Raw Material for Electronics. Physical Form: Liquid. Recommended Dosage: 0.1-10% (Often in the range of 0.5-3%.). Certification: NDSL, ENCS. Product Code: PIM000088302. | Australia |
| Silaplane FM-0421 | Silaplane FM-04 series, including Silaplane FM-0421 with a Molecular Weight (Mn) of 5000, can react with urethane resins and polyesters to impart the excellent properties of silicone to various organic resins. As a result, Silaplane can be used as a raw material for polymers, filler dispersants, and surface treatment agents. Group: Specialty chemicals, electronic & specialties, paints & coatings, polymers. CAS No. 207308-30-3, 191920-47-5. Composition: Reactive silicone. Application: Adhesives & Sealants, Architectural and Deco., Automotive Paints, Construction, Electronic Chemicals, Fibers, Textiles & Films, Lamination and Converting, Masterbatch & Compounders, Polymer Producers, Powder Coating, Printing Inks, Rubber & Elastomers, Thermosets & Composites, Thermoplastic Transformers. Function: Adhesion Promoters, Anti-Graffiti, Antiscratch, Coupling Agents / Chain extenders, Dispersing Agents, Intermediates & Accelerators, Optical Materials, Other, Reagents, Rheology Modifiers, Semiconductor Materials, Surface Modifiers - Defoamers, Water Repellents, Acrylic Dispersions, Acrylic Emulsions, Acrylic Resins, Amino - Melamine - Urea Resins, Epoxy Resins, Phenolic Resins, Polyamide, Polyisocyanates, Polyurethane / Polyaspartics, Polyurethane Dispersions, Redispersable Powder, SBR Emulsions, Silane Terminated Polyethers, Silicone Resins, Styrene-Acrylic Dispersions, UV Binders and Oligomers, Vinyl Resins, Complex Inorganic Pigments, Functional Dyes, Iron Oxide, TiO3 (Titanium Dioxide), POLYMERS, Polymer Producers/Rheology modifier, SBR, Silicone Rubber, TPU, Raw Material for Electronics. Physical Form: Liquid. Recommended Dosage: 0.1-10% (Often in the range of 0.5-3%.). Certification: NDSL, ENCS. Product Code: PIM000088303. | Australia |
| Silaplane FM-0425 | Silaplane FM-04 series, including Silaplane FM-0425 with a Molecular Weight (Mn) of 10000, can react with urethane resins and polyesters to impart the excellent properties of silicone to various organic resins. As a result, Silaplane can be used as a raw material for polymers, filler dispersants, and surface treatment agents. Group: Specialty chemicals, electronic & specialties, paints & coatings, polymers. CAS No. 207308-30-3, 191920-47-5. Composition: Reactive silicone. Application: Adhesives & Sealants, Architectural and Deco., Automotive Paints, Construction, Electronic Chemicals, Fibers, Textiles & Films, Lamination and Converting, Masterbatch & Compounders, Polymer Producers, Powder Coating, Printing Inks, Rubber & Elastomers, Thermosets & Composites, Thermoplastic Transformers. Function: Adhesion Promoters, Anti-Graffiti, Antiscratch, Coupling Agents / Chain extenders, Dispersing Agents, Intermediates & Accelerators, Optical Materials, Other, Reagents, Rheology Modifiers, Semiconductor Materials, Surface Modifiers - Defoamers, Water Repellents, Acrylic Dispersions, Acrylic Emulsions, Acrylic Resins, Amino - Melamine - Urea Resins, Epoxy Resins, Phenolic Resins, Polyamide, Polyisocyanates, Polyurethane / Polyaspartics, Polyurethane Dispersions, Redispersable Powder, SBR Emulsions, Silane Terminated Polyethers, Silicone Resins, Styrene-Acrylic Dispersions, UV Binders and Oligomers, Vinyl Resins, Complex Inorganic Pigments, Functional Dyes, Iron Oxide, TiO4 (Titanium Dioxide), POLYMERS, Polymer Producers/Rheology modifier, SBR, Silicone Rubber, TPU, Raw Material for Electronics. Physical Form: Liquid. Recommended Dosage: 0.1-10% (Often in the range of 0.5-3%.). Certification: NDSL, ENCS. Product Code: PIM000088304. | Australia |
| Silaplane FM-0711 | Silaplane FM-07 series, including Silaplane FM-0711 with a Molecular Weight (Mn) of 1000, can react with Acrylic resins to impart the excellent properties of silicone to various organic resins. As a result, Silaplane can be used as a raw material for polymers. Group: Specialty chemicals, polymers, electronic & specialties, paints & coatings. CAS No. 146632-07-7. Composition: Reactive silicone. Application: Adhesives & Sealants, Architectural and Deco., Automotive Paints, Construction, Electronic Chemicals, Fibers, Textiles & Films, Lamination and Converting, Masterbatch & Compounders, Polymer Producers, Powder Coating, Printing Inks, Rubber & Elastomers, Thermosets & Composites, Thermoplastic Transformers. Function: Adhesion Promoters, Anti-Graffiti, Antiscratch, Coupling Agents / Chain extenders, Dispersing Agents, Intermediates & Accelerators, Optical Materials, Other, Reagents, Rheology Modifiers, Semiconductor Materials, Surface Modifiers - Defoamers, Water Repellents, Acrylic Dispersions, Acrylic Emulsions, Acrylic Resins, Amino - Melamine - Urea Resins, Epoxy Resins, Phenolic Resins, Polyamide, Polyisocyanates, Polyurethane / Polyaspartics, Polyurethane Dispersions, Redispersable Powder, SBR Emulsions, Silane Terminated Polyethers, Silicone Resins, Styrene-Acrylic Dispersions, UV Binders and Oligomers, Vinyl Resins, Complex Inorganic Pigments, Functional Dyes, Iron Oxide, TiO5 (Titanium Dioxide), POLYMERS, Polymer Producers/Rheology modifier, SBR, Silicone Rubber, TPU, Raw Material for Electronics. Physical Form: Liquid. Recommended Dosage: 0.1-10% (Often in the range of 0.5-3%.). Certification: ENCS. Product Code: PIM000056806. | Australia |
| Silaplane FM-0721 | Silaplane FM-07 series, including Silaplane FM-0721 with a Molecular Weight (Mn) of 5000, can react with Acrylic resins to impart the excellent properties of silicone to various organic resins. As a result, Silaplane can be used as a raw material for polymers. Group: Specialty chemicals, polymers, electronic & specialties, paints & coatings. CAS No. 146632-07-7. Composition: Reactive silicone. Application: Adhesives & Sealants, Architectural and Deco., Automotive Paints, Construction, Electronic Chemicals, Fibers, Textiles & Films, Lamination and Converting, Masterbatch & Compounders, Polymer Producers, Powder Coating, Printing Inks, Rubber & Elastomers, Thermosets & Composites, Thermoplastic Transformers. Function: Adhesion Promoters, Anti-Graffiti, Antiscratch, Coupling Agents / Chain extenders, Dispersing Agents, Intermediates & Accelerators, Optical Materials, Other, Reagents, Rheology Modifiers, Semiconductor Materials, Surface Modifiers - Defoamers, Water Repellents, Acrylic Dispersions, Acrylic Emulsions, Acrylic Resins, Amino - Melamine - Urea Resins, Epoxy Resins, Phenolic Resins, Polyamide, Polyisocyanates, Polyurethane / Polyaspartics, Polyurethane Dispersions, Redispersable Powder, SBR Emulsions, Silane Terminated Polyethers, Silicone Resins, Styrene-Acrylic Dispersions, UV Binders and Oligomers, Vinyl Resins, Complex Inorganic Pigments, Functional Dyes, Iron Oxide, TiO6 (Titanium Dioxide), POLYMERS, Polymer Producers/Rheology modifier, SBR, Silicone Rubber, TPU, Raw Material for Electronics. Physical Form: Liquid. Recommended Dosage: 0.1-10% (Often in the range of 0.5-3%.). Certification: ENCS. Product Code: PIM000005671. | Australia |
| Silaplane FM-0725 | Silaplane FM-07 series, including Silaplane FM-0725 with a Molecular Weight (Mn) of 10000, can react with Acrylic resins to impart the excellent properties of silicone to various organic resins. As a result, Silaplane can be used as a raw material for polymers. Group: Specialty chemicals, electronic & specialties, paints & coatings, polymers. CAS No. 146632-07-7. Composition: Reactive silicone. Application: Adhesives & Sealants, Architectural and Deco., Automotive Paints, Construction, Electronic Chemicals, Fibers, Textiles & Films, Lamination and Converting, Masterbatch & Compounders, Polymer Producers, Powder Coating, Printing Inks, Rubber & Elastomers, Thermosets & Composites, Thermoplastic Transformers. Function: Adhesion Promoters, Anti-Graffiti, Antiscratch, Coupling Agents / Chain extenders, Dispersing Agents, Intermediates & Accelerators, Optical Materials, Other, Reagents, Rheology Modifiers, Semiconductor Materials, Surface Modifiers - Defoamers, Water Repellents, Acrylic Dispersions, Acrylic Emulsions, Acrylic Resins, Amino - Melamine - Urea Resins, Epoxy Resins, Phenolic Resins, Polyamide, Polyisocyanates, Polyurethane / Polyaspartics, Polyurethane Dispersions, Redispersable Powder, SBR Emulsions, Silane Terminated Polyethers, Silicone Resins, Styrene-Acrylic Dispersions, UV Binders and Oligomers, Vinyl Resins, Complex Inorganic Pigments, Functional Dyes, Iron Oxide, TiO7 (Titanium Dioxide), POLYMERS, Polymer Producers/Rheology modifier, SBR, Silicone Rubber, TPU, Raw Material for Electronics. Physical Form: Liquid. Recommended Dosage: 0.1-10% (Often in the range of 0.5-3%.). Certification: ENCS. Product Code: PIM000088305. | Australia |
| Silaplane FM-7711 | Silaplane FM-77 series, including Silaplane FM-7711 with a Molecular Weight (Mn) of 1000, can react with Acrylic resins to impart the excellent properties of silicone to various organic resins. As a result, Silaplane can be used as a raw material for polymers. Group: Specialty chemicals, electronic & specialties, paints & coatings, polymers. CAS No. 58130-03-3, 804475-35-2. Composition: Reactive silicone. Application: Adhesives & Sealants, Architectural and Deco., Automotive Paints, Construction, Electronic Chemicals, Fibers, Textiles & Films, Lamination and Converting, Masterbatch & Compounders, Polymer Producers, Powder Coating, Printing Inks, Rubber & Elastomers, Thermosets & Composites, Thermoplastic Transformers. Function: Adhesion Promoters, Anti-Graffiti, Antiscratch, Coupling Agents / Chain extenders, Dispersing Agents, Intermediates & Accelerators, Optical Materials, Other, Reagents, Rheology Modifiers, Semiconductor Materials, Surface Modifiers - Defoamers, Water Repellents, Acrylic Dispersions, Acrylic Emulsions, Acrylic Resins, Amino - Melamine - Urea Resins, Epoxy Resins, Phenolic Resins, Polyamide, Polyisocyanates, Polyurethane / Polyaspartics, Polyurethane Dispersions, Redispersable Powder, SBR Emulsions, Silane Terminated Polyethers, Silicone Resins, Styrene-Acrylic Dispersions, UV Binders and Oligomers, Vinyl Resins, Complex Inorganic Pigments, Functional Dyes, Iron Oxide, TiO11 (Titanium Dioxide), POLYMERS, Polymer Producers/Rheology modifier, SBR, Silicone Rubber, TPU, Raw Material for Electronics. Physical Form: Liquid. Recommended Dosage: 0.1-10% (Often in the range of 0.5-3%.). Certification: ENCS. Product Code: PIM000088310. | Australia |
| Silaplane FM-7721 | Silaplane FM-77 series, including Silaplane FM-7721 with a Molecular Weight (Mn) of 5000, can react with Acrylic resins to impart the excellent properties of silicone to various organic resins. As a result, Silaplane can be used as a raw material for polymers. Group: Specialty chemicals, electronic & specialties, paints & coatings, polymers. CAS No. 58130-03-3, 804475-35-2. Composition: Reactive silicone. Application: Adhesives & Sealants, Architectural and Deco., Automotive Paints, Construction, Electronic Chemicals, Fibers, Textiles & Films, Lamination and Converting, Masterbatch & Compounders, Polymer Producers, Powder Coating, Printing Inks, Rubber & Elastomers, Thermosets & Composites, Thermoplastic Transformers. Function: Adhesion Promoters, Anti-Graffiti, Antiscratch, Coupling Agents / Chain extenders, Dispersing Agents, Intermediates & Accelerators, Optical Materials, Other, Reagents, Rheology Modifiers, Semiconductor Materials, Surface Modifiers - Defoamers, Water Repellents, Acrylic Dispersions, Acrylic Emulsions, Acrylic Resins, Amino - Melamine - Urea Resins, Epoxy Resins, Phenolic Resins, Polyamide, Polyisocyanates, Polyurethane / Polyaspartics, Polyurethane Dispersions, Redispersable Powder, SBR Emulsions, Silane Terminated Polyethers, Silicone Resins, Styrene-Acrylic Dispersions, UV Binders and Oligomers, Vinyl Resins, Complex Inorganic Pigments, Functional Dyes, Iron Oxide, TiO12 (Titanium Dioxide), POLYMERS, Polymer Producers/Rheology modifier, SBR, Silicone Rubber, TPU, Raw Material for Electronics. Physical Form: Liquid. Recommended Dosage: 0.1-10% (Often in the range of 0.5-3%.). Certification: ENCS. Product Code: PIM000088311. | Australia |
| Silaplane FM-DA11 | Silaplane FM-DA series, including Silaplane FM-DA11 with a Molecular Weight (Mn) of 1000, can react with urethane resins and polyesters to impart the excellent properties of silicone to various organic resins. As a result, Silaplane can be used as a raw material for polymers, filler dispersants, and surface treatment agents. Group: Specialty chemicals, electronic & specialties, paints & coatings, polymers. CAS No. 218131-11-4, 222416-18-4. Composition: Reactive silicone. Application: Adhesives & Sealants, Architectural and Deco., Automotive Paints, Construction, Electronic Chemicals, Fibers, Textiles & Films, Lamination and Converting, Masterbatch & Compounders, Polymer Producers, Powder Coating, Printing Inks, Rubber & Elastomers, Thermosets & Composites, Thermoplastic Transformers. Function: Adhesion Promoters, Anti-Graffiti, Antiscratch, Coupling Agents / Chain extenders, Dispersing Agents, Intermediates & Accelerators, Optical Materials, Other, Reagents, Rheology Modifiers, Semiconductor Materials, Surface Modifiers - Defoamers, Water Repellents, Acrylic Dispersions, Acrylic Emulsions, Acrylic Resins, Amino - Melamine - Urea Resins, Epoxy Resins, Phenolic Resins, Polyamide, Polyisocyanates, Polyurethane / Polyaspartics, Polyurethane Dispersions, Redispersable Powder, SBR Emulsions, Silane Terminated Polyethers, Silicone Resins, Styrene-Acrylic Dispersions, UV Binders and Oligomers, Vinyl Resins, Complex Inorganic Pigments, Functional Dyes, Iron Oxide, TiO8 (Titanium Dioxide), POLYMERS, Polymer Producers/Rheology modifier, SBR, Silicone Rubber, TPU, Raw Material for Electronics. Physical Form: Liquid. Recommended Dosage: 0.1-10% (Often in the range of 0.5-3%.). Product Code: PIM000088306. | Australia |
| Silaplane FM-DA21 | Silaplane FM-DA series, including Silaplane FM-DA21 with a Molecular Weight (Mn) of 5000, can react with urethane resins and polyesters to impart the excellent properties of silicone to various organic resins. As a result, Silaplane can be used as a raw material for polymers, filler dispersants, and surface treatment agents. Group: Specialty chemicals, electronic & specialties, paints & coatings, polymers. CAS No. 218131-11-4, 222416-18-4. Composition: Reactive silicone. Application: Adhesives & Sealants, Architectural and Deco., Automotive Paints, Construction, Electronic Chemicals, Fibers, Textiles & Films, Lamination and Converting, Masterbatch & Compounders, Polymer Producers, Powder Coating, Printing Inks, Rubber & Elastomers, Thermosets & Composites, Thermoplastic Transformers. Function: Adhesion Promoters, Anti-Graffiti, Antiscratch, Coupling Agents / Chain extenders, Dispersing Agents, Intermediates & Accelerators, Optical Materials, Other, Reagents, Rheology Modifiers, Semiconductor Materials, Surface Modifiers - Defoamers, Water Repellents, Acrylic Dispersions, Acrylic Emulsions, Acrylic Resins, Amino - Melamine - Urea Resins, Epoxy Resins, Phenolic Resins, Polyamide, Polyisocyanates, Polyurethane / Polyaspartics, Polyurethane Dispersions, Redispersable Powder, SBR Emulsions, Silane Terminated Polyethers, Silicone Resins, Styrene-Acrylic Dispersions, UV Binders and Oligomers, Vinyl Resins, Complex Inorganic Pigments, Functional Dyes, Iron Oxide, TiO9 (Titanium Dioxide), POLYMERS, Polymer Producers/Rheology modifier, SBR, Silicone Rubber, TPU, Raw Material for Electronics. Physical Form: Liquid. Recommended Dosage: 0.1-10% (Often in the range of 0.5-3%.). Certification: ENCS. Product Code: PIM000088308. | Australia |
| Silaplane FM-DA26 | Silaplane FM-DA series, including Silaplane FM-DA26 with a Molecular Weight (Mn) of 15000, can react with urethane resins and polyesters to impart the excellent properties of silicone to various organic resins. As a result, Silaplane can be used as a raw material for polymers, filler dispersants, and surface treatment agents. Group: Specialty chemicals, electronic & specialties, paints & coatings, polymers. CAS No. 218131-11-4. Composition: Reactive silicone. Application: Adhesives & Sealants, Architectural and Deco., Automotive Paints, Construction, Electronic Chemicals, Fibers, Textiles & Films, Lamination and Converting, Masterbatch & Compounders, Polymer Producers, Powder Coating, Printing Inks, Rubber & Elastomers, Thermosets & Composites, Thermoplastic Transformers. Function: Adhesion Promoters, Anti-Graffiti, Antiscratch, Coupling Agents / Chain extenders, Dispersing Agents, Intermediates & Accelerators, Optical Materials, Other, Reagents, Rheology Modifiers, Semiconductor Materials, Surface Modifiers - Defoamers, Water Repellents, Acrylic Dispersions, Acrylic Emulsions, Acrylic Resins, Amino - Melamine - Urea Resins, Epoxy Resins, Phenolic Resins, Polyamide, Polyisocyanates, Polyurethane / Polyaspartics, Polyurethane Dispersions, Redispersable Powder, SBR Emulsions, Silane Terminated Polyethers, Silicone Resins, Styrene-Acrylic Dispersions, UV Binders and Oligomers, Vinyl Resins, Complex Inorganic Pigments, Functional Dyes, Iron Oxide, TiO10 (Titanium Dioxide), POLYMERS, Polymer Producers/Rheology modifier, SBR, Silicone Rubber, TPU, Raw Material for Electronics. Physical Form: Liquid. Recommended Dosage: 0.1-10% (Often in the range of 0.5-3%.). Certification: ENCS. Product Code: PIM000088309. | Australia |
| Silaplane TM-0701T | Silaplane TM-0701T with a Molecular Weight (Mn) of 423 can react with Acrylic resins to impart the excellent properties of silicone to various organic resins. As a result, Silaplane can be used as a raw material for polymers. Group: Specialty chemicals, electronic & specialties, paints & coatings, polymers. CAS No. 17096-07-0. Composition: Reactive silicone. Application: Adhesives & Sealants, Architectural and Deco., Automotive Paints, Construction, Electronic Chemicals, Fibers, Textiles & Films, Lamination and Converting, Masterbatch & Compounders, Polymer Producers, Powder Coating, Printing Inks, Rubber & Elastomers, Thermosets & Composites, Thermoplastic Transformers. Function: Adhesion Promoters, Anti-Graffiti, Antiscratch, Coupling Agents / Chain extenders, Dispersing Agents, Intermediates & Accelerators, Optical Materials, Other, Reagents, Rheology Modifiers, Semiconductor Materials, Surface Modifiers - Defoamers, Water Repellents, Acrylic Dispersions, Acrylic Emulsions, Acrylic Resins, Amino - Melamine - Urea Resins, Epoxy Resins, Phenolic Resins, Polyamide, Polyisocyanates, Polyurethane / Polyaspartics, Polyurethane Dispersions, Redispersable Powder, SBR Emulsions, Silane Terminated Polyethers, Silicone Resins, Styrene-Acrylic Dispersions, UV Binders and Oligomers, Vinyl Resins, Complex Inorganic Pigments, Functional Dyes, Iron Oxide, TiO13 (Titanium Dioxide), POLYMERS, Polymer Producers/Rheology modifier, SBR, Silicone Rubber, TPU, Raw Material for Electronics. Physical Form: Liquid. Recommended Dosage: 0.1-10% (Often in the range of 0.5-3%.). Certification: EINECS, ENCS. Product Code: PIM000088312. | Australia |
| A-C® 1702 | A-C® 1702 is grease like, low temperature, completely amorphous, low density polyethylene (PE) homopolymer for use in solvent borne coatings, heat set, sheet fed solvent borne inks, and specialty digital and UV/EB inks to provide mar and rub resistance by lowering the coefficient of friction. Also used in lubricants to provide release. Will act as a plasticizer in paraffin based candles, especially large volume candles, to resist cracking. Group: Specialty chemicals, polymers. CAS No. 9002-88-4. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.1~2%. Certification: REACH. Product Code: PIM000007932. | Australia |
| A-C 316 | A-C 316 is a hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion resistance by lowering the coefficient of friction. In textiles, this can help improve sewability and fabric cutting, helping to extend cutting machine lifetime. Its acid number of 16 allows it to be emulsified into water. Can also provide heat resistance to hot melt adhesives (HMAs). In addition, may be used as a metal release agent for PVC processing and is a fusion control for PVC formulations. It will not affect clarity in transparent PVC applications. Very effective for use in processing PVC regrind. Group: Specialty chemicals, polymers. CAS No. 9002-88-4. Composition: OPE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.1~2%. Certification: REACH, Food Contact. Product Code: PIM000007937. | Australia |
| A-C® 316A | A-C® 316A is a oxidized polyethylene (HDOxPEs) homopolymer, in a finer powder form that had a hard, high drop point & high density. A-C® 316A offers the benefts in PVC processing & fusion control as a metal release agent. A-C® 316A will not affect clarity in transparent PVC applications. Very effective for use in processing PVC regrind. Group: Specialty chemicals, polymers. CAS No. 68441-17-8. Composition: Oxidized Polyethylene. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Thermoplastic Transformers. Function: Waxes, POLYMERS, PVC. Physical Form: Micronized Powder. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007907. | Australia |
| A-C 325 | A-C 325 is a hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion resistance by lowering the coefficient of friction. In textiles, this can help improve sewability and fabric cutting, extending cutting machine lifetime. Its acid number of 25 allows it to be emulsified into water. Can also provide heat resistance to hot melt adhesives (HMAs). Group: Specialty chemicals, polymers. CAS No. 68441-17-8. Composition: OPE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007915. | Australia |
| A-C 330 | A-C 330 is a hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion resistance by lowering the coefficient of friction. In textiles, can help improve sewability and fabric cutting, extending cutting machine lifetime. Its acid number is 30, which allows it to be emulsified into water. Can also provide heat resistance to hot melt adhesives (HMAs). Group: Specialty chemicals, polymers, paints & coatings. CAS No. 68441-17-8. Composition: OPE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Can, Coil and Industrial. Function: Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007921. | Australia |
| A-C® 3325 | A-C® 3325 is a hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion resistance by lowering the coefficient of friction. In textiles, this can help improve sewability and fabric cutting, extending cutting machine lifetime. Its acid number of 25 allows it to be emulsified into water. Can also provide heat resistance to hot melt adhesives (HMAs). Group: Specialty chemicals, polymers. CAS No. 68441-17-8. Composition: OPE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007925. | Australia |
| A-C® 3330 | A-C® 3330 is hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion resistance by lowering the coefficient of friction. In textiles, can help improve sewability and fabric cutting, extending cutting machine lifetime. Its acid number is 30, which allows it to be emulsified into water. Can also provide heat resistance to hot melt adhesives (HMAs). Group: Specialty chemicals, polymers. CAS No. 68441-17-8. Composition: OPE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007926. | Australia |
| A-C 392 | A-C 392 is hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion resistance by lowering the coefficient of friction. In textiles, can help improve sewability and fabric cutting, extending cutting machine lifetime. Its acid number of 30 allows it to be emulsified into water. Can also provide heat resistance to hot melt adhesives (HMAs). Additionally, it is an effective metal release agent for cellular PVC applications. Group: Specialty chemicals, polymers. CAS No. 68441-17-8. Composition: OPE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.3~0.5%. Certification: REACH. Product Code: PIM000007923. | Australia |
| A-C 6 | A-C 6 is a low density polyethylene (LDPE) homopolymer in a prill form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. Can also be partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. Used in cable flooding compounds, along with polybutene. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 9002-88-4. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Adhesives & Sealants. Function: Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.1~2%. Certification: REACH. Product Code: PIM000007910. | Australia |
| A-C® 617 | A-C® 617 is a low density polyethylene (LDPE) homopolymer in a prill form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. Can also be partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. Is used as a dispersing agent in color masterbatch applications. In PVC applications it finds use as an external lubricant. Group: Specialty chemicals, polymers. Composition: EVA WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007918. | Australia |
| A-C® 617A | A-C® 617A is a low density polyethylene (LDPE) homopolymer in a powdered form. A-C® 617A displays the function in improving surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. A-C® 617A can also be partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. In PVC applications it finds use as an external lubricant. Group: Specialty chemicals, polymers. CAS No. 9002-88-4. Composition: Low Density Polyethylene. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Thermoplastic Transformers. Function: Waxes, POLYMERS, PVC. Physical Form: Micronized Powder. Recommended Dosage: 1.0%. Certification: REACH. Product Code: PIM000007913. | Australia |
| A-C 629 | A-C 629 is a low density Oxidized Polyethylene (LDOxPE) homopolymer in prill form for use in solvent borne coatings as a rheological aid. It also finds use as a metal release agent in PVC. It can also be atmospherically emulsified for use in aqueous applications, such as textiles, lubricants, coatings and inks, to lower the COF and provide surface properties such as mar & abrasion resistance and increased slip. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 68441-17-8. Composition: OPE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Others. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007914. | Australia |
| A-C® 629A | A-C® 629A is a Low density Oxidized Polyethylene (LDOxPE) homopolymer in prill form for use in solvent borne coatings as a rheological aid. It also finds use as a metal release agent in PVC. It is a pigment dispersing agent for color masterbatch. A-C® 629A can also be atmospherically emulsified for use in aqueous applications, such as textiles, lubricants, coatings and inks, to lower the COF and provide surface properties such as mar & abrasion resistance and increased slip. Group: Specialty chemicals, polymers. CAS No. 68441-17-8. Composition: Low Density Oxidized Polyethylene. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: Waxes, Dispersing Agents. Physical Form: Solid. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007905. | Australia |
| A-C 680 | A-C 680 is low density Oxidized Polyethylene (LDOxPE) homopolymer in prill form for use in solvent borne coatings as a rheological aid. It can also be atmospherically emulsified for use in aqueous applications, such as textiles, lubricants, coatings and inks, to lower the COF and provide surface properties such as mar &, abrasion resistance and increased slip. It can also be used as an anti transpirant coating to delay fruit spoilage allowing longer storage and transport times. It also finds use as a metal release agent in PVC. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 68441-17-8. Composition: OPE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Others. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 2.0%. Certification: REACH. Product Code: PIM000007927. | Australia |
| A-C® 6A | A-C® 6A is a homopolymer in a powdered form; for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. A-C® 6A can be also partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. Used in cable flooding compounds, along with polybutene. Is used as a dispersing agent in color masterbatch applications. Group: Specialty chemicals, polymers, paints & coatings. CAS No. 9002-88-4. Composition: Low Density Polyethylene. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Powder Coating, Printing Inks. Function: Waxes, Dispersing Agents, POLYMERS, Polystyrene (PS). Physical Form: Micronized Powder. Recommended Dosage: 0.1~2%. Certification: REACH, Food Contact, PICCS. Product Code: PIM000007906. | Australia |
| A-C 8 | A-C 8 is low density polyethylene (LDPE) homopolymer in a prill form, for use in solvent borne coatings, heatset and liquid solvent borne inks,to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. Can also be partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. Group: Specialty chemicals, polymers. CAS No. 9002-88-4. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.5%. Certification: REACH. Product Code: PIM000007922. | Australia |
| A-C® 9A | A-C® 9A is low density polyethylene (LDPE) homopolymer in a powdered form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. Can also be partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. Best choice in cable filling compounds to prevent oil bleed at high temperatures. Is used as a dispersing agent in color masterbatch applications. Group: Specialty chemicals, polymers. CAS No. 9002-88-4. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.1~2%. Certification: REACH. Product Code: PIM000007929. | Australia |
| ACUMIST A-12 | ACUMIST A12 is Micronized Oxidized Polyethylene Homopolymer for use in water based coatings, flexographic and gravure inks and overprint varnishes. It also can be used as a processing aid, matting and antissetling agent in paints. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 68441-17-8. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Adhesives & Sealants. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.5~1%. Certification: REACH. Product Code: PIM000007936. | Australia |
| ACUMIST C-5 | ACUMIST C-5 is medium particle size micronized Polyethylene Homopolymer for use in solvent borne coatings and solvent based flexographic inks. As with all ACumist products, it is insoluble in solvents and UV based monomers and oligomers at room temperature. best suited goroffset inks, can coatings , and all thin film solvent based coatings. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 68441-17-8. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Adhesives & Sealants. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.5~1%. Certification: REACH. Product Code: PIM000007930. | Australia |
| ACUMIST D-6 | ACUMIST D-6 is micronized Polyethylene Homopolymer for use and general purpose solvent borne coatings, stains and lacquers, and gravure inks. It provides a good balance of properties where economics are of paramount concern. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 68441-17-8. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Adhesives & Sealants. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.5~1%. Certification: REACH. Product Code: PIM000007933. | Australia |
| ACUMIST D-9 | D-9 Micronized Polyethylene Homopolymer for use general purpose solvent borne coatings, stains and lacquers, and gravure inks. It provides a good balance of properties where economics are of paramount concernMostlu used in Gravure inks for slip and rubs. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 68441-17-8. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Adhesives & Sealants. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.5~1%. Certification: REACH. Product Code: PIM000007934. | Australia |
| EXTOS® ET-8010 | EXTOS is a new type of CSM with improved dynamic and low temperature properties. ET-8010__Good dynamic and low temperature properties Vulcanizing adhesion with EPDM is possible & Good resistance to cold, offering better dynamic fatigue resistance. Key Application: Automotive parts: Synchronous timing belts, poly-V-belts, coverings for the weatherstrips, Train parts : Coupling coverings, Engineering and building articles: Building gaskets. Group: Specialty chemicals, polymers. Composition: Alkylated Polyethylene. Application: Rubber & Elastomers. Physical Form: Solid. Product Code: PIM000032222. | Australia |
| EXTOS® ET-8510 | EXTOS is a new type of CSM with improved dynamic and low temperature properties. ET-8510__Oil resistance, Similar to ET-8010 in all respects, with good resistance to oil. Key Application: Automotive parts: Synchronous timing belts, poly-V-belts, coverings for the weatherstrips, Train parts : Coupling coverings, Engineering and building articles: Building gaskets. Group: Specialty chemicals, polymers. Composition: Alkylated Polyethylene. Application: Rubber & Elastomers. Physical Form: Solid. Product Code: PIM000032223. | Australia |
| FINE-BLEND CMG5804 | FINE-BLEND CMG5804 is a maleic anhydride grafted polymer. The base polymer is high density polyethylene, and it has white or light yellow particle appearance. FINE-BLEND CMG5804 can be used in low-smoke halogen-free flame-retardant wire and cable system and wood plastics composite (WPC) system as compitibilizer which can improve the properties of matrix material. Group: Specialty chemicals, polymers. Composition: PE-g-MAH. Application: Masterbatch & Compounders. Function: ADDITIVES, Dispersing Agents. Physical Form: Solid. Product Code: PIM000005688. | Australia |
| HONEYWELL A-C® 20A | HONEYWELL A-C® 20A is used in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. Can also be partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. Used in cable flooding compounds, along with polybutene. Group: Specialty chemicals, polymers. CAS No. 12003-38-2, 18282-10-5, 13463-67-15. Composition: Low Density Polyethylene. Application: Masterbatch & Compounders. Function: POLYMERS, Other. Physical Form: Solid. Product Code: PIM000038566. | Australia |
| J-392G35 | J-392G35 is a nonionic polyethylene emulsion that provides great black heel resistance, toughness, buffability, and mar resistance for floor polish formulation. Please see the specification sheet below and for further details contact our local sales representative today. Group: Specialty chemicals, paints & coatings, polymers. Composition: High density polyethylene. Application: Polymer Producers, Lamination and Converting. Function: ADDITIVESOther. Physical Form: Liquid. Product Code: PIM000054002. | Australia |
| KELIREN® CPE 3610 | KELIREN® CPE 3610 is a random and saturated thermoplastic resin. It has very good extruding flowability when blended with PVC. KELIREN® CPE 3610 is suitable for PVC profiles and compression moulding products. Please see the specification sheet below and for further details contact our local sales representative today. Group: Specialty chemicals, polymers. CAS No. 63231-66-3. Composition: Chlorinated Polyethylene Resin. Application: Thermoplastic Transformers. Function: ADDITIVES, Other, POLYMERS, PVC. Physical Form: Micronized Powder. Product Code: PIM000042716. | Australia |
| LIPOXOL 1500 | LIPOXOL 1500 In film coatings, solid grades of polyethylene glycol can be used alone for the film-coating of tablets or can be useful as hydrophilic polishing materials. Solid grades are also widely used as plasticizers in conjunction with film-forming polymers. The presence of polyethylene glycols in film coats, especially of liquid grades, tends to increase their water permeability and may reduce protection against low pH in enteric-coating films. Polyethylene glycols are useful as plasticizers in microencapsulated products to avoid rupture of the coating film when the microcapsules are compressed into tablets. Group: Pharmaceutical ingredients, excipients. CAS No. 25322-68-3. Composition: Polyethylene Glycol. Application: Oral, Tablets, Pellets, Powder. Function: Plasticizer, Tablet Coating. Physical Form: Flakes. Certification: USP/NF, EP. Product Code: PIM000009558. | Australia |
| LIPOXOL 300 | LIPOXOL 300 In film coatings, solid grades of polyethylene glycol can be used alone for the film-coating of tablets or can be useful as hydrophilic polishing materials. Solid grades are also widely used as plasticizers in conjunction with film-forming polymers. The presence of polyethylene glycols in film coats, especially of liquid grades, tends to increase their water permeability and may reduce protection against low pH in enteric-coating films. Polyethylene glycols are useful as plasticizers in microencapsulated products to avoid rupture of the coating film when the microcapsules are compressed into tablets. Group: Pharmaceutical ingredients, excipients. CAS No. 25322-68-3. Composition: Polyethylene Glycol. Application: Oral, Tablets, Pellets, Powder. Function: Plasticizer, Tablet Coating. Physical Form: Liquid. Certification: USP/NF, EP. Product Code: PIM000009559. | Australia |
| LIPOXOL 3350 | LIPOXOL 3350 In film coatings, solid grades of polyethylene glycol can be used alone for the film-coating of tablets or can be useful as hydrophilic polishing materials. Solid grades are also widely used as plasticizers in conjunction with film-forming polymers. The presence of polyethylene glycols in film coats, especially of liquid grades, tends to increase their water permeability and may reduce protection against low pH in enteric-coating films. Polyethylene glycols are useful as plasticizers in microencapsulated products to avoid rupture of the coating film when the microcapsules are compressed into tablets. Group: Pharmaceutical ingredients, excipients. CAS No. 25322-68-3. Composition: Polyethylene Glycol. Application: Oral, Tablets, Pellets, Powder. Function: Plasticizer, Tablet Coating. Physical Form: Flakes. Certification: USP/NF, EP. Product Code: PIM000009560. | Australia |
| LIPOXOL 6000 | LIPOXOL 6000 in film coatings, solid grades of polyethylene glycol can be used alone for the film-coating of tablets or can be useful as hydrophilic polishing materials. Solid grades are also widely used as plasticizers in conjunction with film-forming polymers. The presence of polyethylene glycols in film coats, especially of liquid grades, tends to increase their water permeability and may reduce protection against low pH in enteric-coating films. Polyethylene glycols are useful as plasticizers in microencapsulated products to avoid rupture of the coating film when the microcapsules are compressed into tablets. Group: Pharmaceutical ingredients, excipients. CAS No. 25322-68-3. Composition: Polyethylene Glycol. Application: Oral, Tablets, Pellets, Powder. Function: Plasticizer. Physical Form: Powder. Certification: USP/NF, EP. Product Code: PIM000009563. | Australia |
| LIPOXOL 8000 | LIPOXOL 8000 in film coatings, solid grades of polyethylene glycol can be used alone for the film-coating of tablets or can be useful as hydrophilic polishing materials. Solid grades are also widely used as plasticizers in conjunction with film-forming polymers. The presence of polyethylene glycols in film coats, especially of liquid grades, tends to increase their water permeability and may reduce protection against low pH in enteric-coating films. Polyethylene glycols are useful as plasticizers in microencapsulated products to avoid rupture of the coating film when the microcapsules are compressed into tablets. Group: Pharmaceutical ingredients, excipients. CAS No. 25322-68-3. Composition: Polyethylene Glycol. Application: Oral, Tablets, Pellets, Powder. Function: Plasticizer. Physical Form: Powder. Certification: USP/NF, EP. Product Code: PIM000009564. | Australia |
| LUNA-NOX 1076-J | LUNA-NOX 1076-J is a hindered phenol antioxidant, widely used in polymers including polypropylene, polyethylene, polystyrene, polyamide, ABS, and synthetic rubbers. It is also an effective antioxidant in oils and paints. LUNA-NOX 1076-J is odourless, tasteless, low toxicity (LD50≥10000mg/kg) and light-stable, and is recommended for use at 0.1 - 0.3% dosage rate. Group: Specialty chemicals, polymers. CAS No. 2082-79-3. Composition: Octadecyl[β-(3.5-di-tert-butyl-4-hydroxyphenyl)-propionate]. Application: Thermoplastic Transformers. Function: Antioxidants. Physical Form: Micronized Powder. Product Code: PIM000060531. | Australia |
| LUNA-STAB LS-292 | LUNA-STAB LS-292 is a hindered amine light stabiliser that reduces interaction with co-additives such as pigments or other stabilisers. LUNA-STAB LS-292 is suitable for polypropylene, polyethene, styrenics, unsaturated polyesters, acrylics, and vinyl polymers (PVC, PVB), including plastisols, elastomers, adhesives, sealants and coatings. In addition, LUNA-STAB LS-292 is also used for polyurethanes because of its solubility in polyols. Group: Specialty chemicals, polymers. CAS No. 41556-26-7, 82919-37-7. Composition: Mixture of Bis(1, 2, 6, 6-pentamethyl- 4-piperidyl)sebacate and Methyl(1, 6-pentamethyl-4 piperidyl)sebacate. Application: Masterbatch & Compounders. Function: ADDITIVES, Stabilisers. Physical Form: Liquid. Product Code: PIM000053743. | Australia |
| PERFORMALENE 400 (POLYETHYLENE) | It is linear, low molecular weight polyethylene wax. It acts as rheology modifier, film forming and oil thickening agent. It has low melt viscosity, totally linear backbone, low molecular weight and hydrophobic. It is easy to formulate. It has improved stick stability, efficient oil structure, SPF enhancement, uniform pay-out, provides matte appearance and light feels on skin. It forms comfortable and flexible film with improved oil phase stability and water resistance. It is used in creams, lotions, hair waxes, sticks, facial scrub and sunscreens. Uses: Sun care (Sun protection, After-sun, Self-tanning) Skin care (Facial care, Facial cleansing, Body care, Baby care) Creams, lotions, body wash, and hair waxes. Group: Personal Care; Cosmetic Raw Materials; Thickeners. Alternative Name: Polyethylene. Grade: Cosmetic Ingredients. CAS Number: 9002-88-4. Pack Sizes: 500 grams, 1kg, 5 kgs, 10kg, 20kg. Similar to: Micropoly (Micro Powders, Inc.), Acudyne NP2W Polymer (The Dow Chemical Company), Ultrapure LDP (Ultra Chemical, Inc.). |  Australia & Worldwide |
| POLYETHYLENE GLYCOL 400 EP | LIPOXOL 400 In film coatings, solid grades of polyethylene glycol can be used alone for the film-coating of tablets or can be useful as hydrophilic polishing materials. Solid grades are also widely used as plasticizers in conjunction with film-forming polymers. The presence of polyethylene glycols in film coats, especially of liquid grades, tends to increase their water permeability and may reduce protection against low pH in enteric-coating films. Polyethylene glycols are useful as plasticizers in microencapsulated products to avoid rupture of the coating film when the microcapsules are compressed into tablets. Group: Pharmaceutical ingredients, excipients. CAS No. 25322-68-3. Composition: Polyethylene Glycol. Application: Oral, Tablets, Pellets, Powder. Function: Plasticizer, Tablet Coating. Physical Form: Liquid. Certification: USP/NF, EP. Product Code: PIM000009561. | Australia |
| SILANE USI-7301 | SILANE USI-7301 is an essential silane coupling agent that appears in a colourless transparent liquid. SILANE USI-7301 offers a variety of functions like reinforcing agent and crosslink agent, rubber process auxiliary agent, anti-mildew agent and deodorant finishing agent, antistatic agent, blood coagulant agent, marine organism anti-fouling agent, liquid crystal alignment agent and electric control agents in electronics copier imaging agent. SILANE USI-7301can be used in a wide range of applications in compound material, ink, gluewater and sealant material, neoprene rubber, chlorobutyl rubber, chlorosulfonated polyethylene rubber. Group: Specialty chemicals, polymers. CAS No. 2530-87-2. Composition: Y-Chloropropyltrimethoxysilan. Application: Thermoplastic Transformers, Rubber & Elastomers. Function: POLYMERS, Other. Physical Form: Liquid. Product Code: PIM000039983. | Australia |
| SOREZ 100 POLYMER | SOREZ 100 POLYMER is a modified polyester copolymer concentrate in water-soluble form. The product imparts wicking properties to hydrophobic textiles. It provides soil-release and anti-redeposition properties while reducing the electrostatic charge of treated polyester. The polymer forms a thin film on the substrate, enabling effective soil removal during subsequent wash cycles. Group: Personal care ingredients, homecare & institutional cleaning. CAS No. 9016-88-0. Composition: Polymer. Application: Laundry, Dishwashing. Function: Film Forming. Physical Form: Liquid. Recommended Dosage: 0.25 - 1.5%. INCI Name: Polyethylene Glycol Polyester Copolymer. Product Code: PIM000004972. | Australia |
| TOSO-CSM® TS-320 | Chlorosulphonated polyethylene (CSM) is a special synthetic rubber manufactured through chlorination and chlorosulphonation of polyethylene. Key Application: Waterproof sheets, magnetic rubbers, etc. Group: Specialty chemicals, polymers. Composition: Polyethylene. Application: Rubber & Elastomers, Thermosets & Composites. Physical Form: Solid. Product Code: PIM000032219. | Australia |
| TOSO-CSM® TS-430 | Chlorosulphonated polyethylene (CSM) is a special synthetic rubber manufactured through chlorination and chlorosulphonation of polyethylene. Key Application: Conventional Molding Parts. Group: Specialty chemicals, polymers. Composition: Polyethylene. Application: Rubber & Elastomers, Thermosets & Composites. Physical Form: Solid. Product Code: PIM000032216. | Australia |
| TOSO-CSM® TS-530 | Chlorosulphonated polyethylene (CSM) is a special synthetic rubber manufactured through chlorination and chlorosulphonation of polyethylene. Key Application: Conventional Molding Parts. Group: Specialty chemicals, polymers. Composition: Polyethylene. Application: Rubber & Elastomers, Thermosets & Composites. Physical Form: Solid. Product Code: PIM000032215. | Australia |
| TOSO-CSM® TS-830 | Chlorosulphonated polyethylene (CSM) is a special synthetic rubber manufactured through chlorination and chlorosulphonation of polyethylene. Key Application: High Loading Types. Group: Specialty chemicals, polymers. Composition: Polyethylene. Application: Polymer Producers. Physical Form: Solid. Product Code: PIM000032217. | Australia |
| TOSO-CSM® TS-930 | Chlorosulphonated polyethylene (CSM) is a special synthetic rubber manufactured through chlorination and chlorosulphonation of polyethylene. Key Application: High Loading Types. Group: Specialty chemicals, polymers. Composition: Polyethylene. Application: Polymer Producers. Physical Form: Solid. Product Code: PIM000032218. | Australia |
| ZINC STEARATE TB | ZINC STEARATE TB is a highly effective pigment dispersion aid and lubricant in PVC, polyethylene and ABS production. In SMC (sheet molding compound) applications, it is used as a viscosity modifier and improves the surface of the finished good. Group: Specialty chemicals, polymers. Composition: Zinc Stearate. Application: Thermoplastic Transformers. Function: POLYMERSPVC. Physical Form: Solid. Product Code: PIM000060090. | Australia |
| ZINC STEARATE TM | ZINC STEARATE TM is a highly effective pigment dispersion aid and lubricant in PVC, polyethylene and ABS production. In SMC (sheet molding compound) applications, it is used as a viscosity modifier and improves the surface of the finished good. Group: Specialty chemicals, electronic & specialties, polymers. Composition: Zinc Stearate. Application: Lubricants, Thermoplastic Transformers. Function: ADDITIVES, Other, POLYMERS, PVC. Physical Form: Solid. Product Code: PIM000042712. | Australia |
| ZINC STEARATE TM (HIGH DENSITY) | ZINC STEARATE TM (High Density) is a highly effective pigment dispersion aid and lubricant in PVC, polyethylene and ABS production. In SMC (sheet molding compound) applications, it is used as a viscosity modifier and improves the surface of the finished good. Group: Specialty chemicals, polymers. Composition: Zinc Stearate. Application: Thermoplastic Transformers. Function: POLYMERSPVC. Physical Form: Solid. Product Code: PIM000060091. | Australia |
Our database is helping our users find suppliers everyday.
