Find where to buy products from Australian suppliers, including: distributors, industrial manufacturers, bulk supplies and wholesalers of raw ingredients & finished goods.
Search for products or services, then visit the suppliers website for prices, SDS or more information. You can also view suppliers in NZ, UK or the USA.
| Product | Description | |
|---|---|---|
| POLYETHYLENE | Polyethylene - High, Low & Linear Low suppliers. MINIMUM QUANTITY 25 KGS. Australian suppliers of specialist chemical products. |  CCC Ingredients: NSW, QLD, SA, WA, VIC, TAS |
| Polyethylene Glycol | Polyethylene Glycols suppliers. MINIMUM QUANTITY 25 KGS. Australian suppliers of specialist chemical products. Categories: Surface Coatings. | CCC Ingredients: NSW, QLD, SA, WA, VIC, TAS |
| POLYETHYLENE GLYCOL 400 | POLYETHYLENE GLYCOL 400 or often called PEG 400 is a low-molecular-weight grade of polyethylene glycol. It is a clear, colorless, viscous liquid. PEG 400 is widely used as a solvent in a variety of pharmaceutical formulations. Group: Pharmaceutical ingredients, excipients. CAS No. 25322-68-3. Composition: Low molecular weight grade of Polyethylene Glycol. Application: Tablets, Capsules, Granules, Pellets. Function: Solubilizer. Physical Form: Liquid. Certification: GMP. Claim: Vegan, Free from Nitrosamine Impurities. Product Code: PIM000009278. |  Australia |
| POLYETHYLENE GLYCOL 400 EP | LIPOXOL 400 In film coatings, solid grades of polyethylene glycol can be used alone for the film-coating of tablets or can be useful as hydrophilic polishing materials. Solid grades are also widely used as plasticizers in conjunction with film-forming polymers. The presence of polyethylene glycols in film coats, especially of liquid grades, tends to increase their water permeability and may reduce protection against low pH in enteric-coating films. Polyethylene glycols are useful as plasticizers in microencapsulated products to avoid rupture of the coating film when the microcapsules are compressed into tablets. Group: Pharmaceutical ingredients, excipients. CAS No. 25322-68-3. Composition: Polyethylene Glycol. Application: Oral, Tablets, Pellets, Powder. Function: Plasticizer, Tablet Coating. Physical Form: Liquid. Certification: USP/NF, EP. Product Code: PIM000009561. | Australia |
| POLYETHYLENE GLYCOL 400 EP | POLYETHYLENE GLYCOL 400 EP is used for drug stabiliser in topical, oral, injectable medication and vitamins. POLYETHYLENE GLYCOL 400 EP high concentration of propylene glycol contained in certain intravenous drug products, such as phenytoin, diazepam, digoxin, and etomidate, may induce thrombophlebitis. Rapid infusion of solutions containing high concentrations of propylene glycol-containing drugs has been linked to respiratory depression, arrhythmias, hypotension, and seizures. Group: Pharmaceutical ingredients, api. CAS No. 25322-68-3. Composition: Polyethylene glycol. Application: Ophthalmic, Topical. Function: Anti-inflammatory Agents. Physical Form: Liquid. Product Code: PIM000029411. | Australia |
| Polyethylene Glycol 400 PEG400 99.9% Liquid Pharmaceutical Grade | Polyethylene Glycol 400 PEG400 99.9% Liquid Pharmaceutical Grade. Polyethylene glycol, referred to as PEG, is used as an inactive ingredient in the pharmaceutical industry as a solvent, plasticizer, surfactant, ointment and suppository base, and tablet and capsule lubricant. PEG "400" indicates that the average molecular weight of the specific PEG is 400. Pack Sizes: 1, 2, 5 and 10 litre drums. AusLabs : Buy laboratory supplies online with same day shipping direct our warehouse. |  Australia |
| Polyethylene glycol 400 synthesis grade (PEG) | Polyethylene glycol 1 Litre. LABSUPPLY AUSTRALIA |  Sydney (NSW) |
| Polyethylene Glycol 6000 | Polyethylene Glycol 6000 Alternative Name: PEG 6000. Pack Sizes: 25 KG. |  Melbourne |
| POLYETHYLENE GLYCOL 6000 | POLYETHYLENE GLYCOL 6000 PF EP/USP is Pyrogen free. It has good solubility in water, very low water content. Group: Pharmaceutical ingredients, excipients. CAS No. 25322-68-3. Composition: Polyethylene Glycol. Application: Oral, Tablets, Pellets, Powder. Function: Plasticizer. Physical Form: Solid. Certification: USP/NF, EP. Product Code: PIM000009595. | Australia |
| Polyethylene glycol 6000, synthesis grade | 1kg Pack PO00651000 25322-68-3 Scharlau |  Nationwide, South Australia (SA) |
| POLYETHYLENE GLYCOL 8000 | POLYETHYLENE GLYCOL 8000 BP is carrier solvent for oral, topical and parenteral preparations. Group: Pharmaceutical ingredients, excipients. CAS No. 25322-68-3. Composition: Polyethylene Glycol. Application: Oral, Tablets, Pellets, Powder. Function: Plasticizer. Physical Form: Powder. Certification: USP/NF, EP. Product Code: PIM000009596. | Australia |
| Polyethylene Glycol Oleate | Polyethylene Glycol Oleate - Fatty Acid Esters, Amides & Amines. |  Victoria |
| Polyethylene Glycols | Polyethylene Glycols. With over 30 years experience in the chemical and raw materials industries, we at Corechem maintain a standard of excellence that can grow your business. |  Sydney, Melbourne, Adelaide, Townsville, Brisbane |
| A-C POLYETHYLENE WAXES | POLYETHYLENE WAXES is low density polyethylene (LDPE) homopolymer in a powdered form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF(Coefficient of Friction). It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs (Hot Melt Adhesives). Can also be partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. In PVC applications it finds use as an external lubricant. Main application is in lip care, eye makeup & hair wax. Group: Personal care ingredients, cosmetics & toiletries. CAS No. 9002-88-4. Composition: Natural derived. Application: Color Care, Hair Care. Physical Form: Powder. INCI Name: Polyethylene. Product Code: PIM000027995. | Australia |
| PERFORMALENE 400 (POLYETHYLENE) | It is linear, low molecular weight polyethylene wax. It acts as rheology modifier, film forming and oil thickening agent. It has low melt viscosity, totally linear backbone, low molecular weight and hydrophobic. It is easy to formulate. It has improved stick stability, efficient oil structure, SPF enhancement, uniform pay-out, provides matte appearance and light feels on skin. It forms comfortable and flexible film with improved oil phase stability and water resistance. It is used in creams, lotions, hair waxes, sticks, facial scrub and sunscreens. Uses: Sun care (Sun protection, After-sun, Self-tanning) Skin care (Facial care, Facial cleansing, Body care, Baby care) Creams, lotions, body wash, and hair waxes. Group: Personal Care; Cosmetic Raw Materials; Thickeners. Alternative Name: Polyethylene. Grade: Cosmetic Ingredients. CAS Number: 9002-88-4. Pack Sizes: 500 grams, 1kg, 5 kgs, 10kg, 20kg. Similar to: Micropoly (Micro Powders, Inc.), Acudyne NP2W Polymer (The Dow Chemical Company), Ultrapure LDP (Ultra Chemical, Inc.). |  Australia & Worldwide |
| 28mm PP Plastic Cap White (410 neck) | These caps are WADDED and suitable for all our PET BOTTLES with a 28mm neck. Cap: polypropylene (PP). Wad: polyethylene (PE). Group: Packaging. Pack Sizes: 1+; 10+; 100+; 1000+ and above upon request. Product ID: C28PWHITELONG. |  Worldwide |
| A-C® 1702 | A-C® 1702 is grease like, low temperature, completely amorphous, low density polyethylene (PE) homopolymer for use in solvent borne coatings, heat set, sheet fed solvent borne inks, and specialty digital and UV/EB inks to provide mar and rub resistance by lowering the coefficient of friction. Also used in lubricants to provide release. Will act as a plasticizer in paraffin based candles, especially large volume candles, to resist cracking. Group: Specialty chemicals, polymers. CAS No. 9002-88-4. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.1~2%. Certification: REACH. Product Code: PIM000007932. | Australia |
| A-C 316 | A-C 316 is a hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion resistance by lowering the coefficient of friction. In textiles, this can help improve sewability and fabric cutting, helping to extend cutting machine lifetime. Its acid number of 16 allows it to be emulsified into water. Can also provide heat resistance to hot melt adhesives (HMAs). In addition, may be used as a metal release agent for PVC processing and is a fusion control for PVC formulations. It will not affect clarity in transparent PVC applications. Very effective for use in processing PVC regrind. Group: Specialty chemicals, polymers. CAS No. 9002-88-4. Composition: OPE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.1~2%. Certification: REACH, Food Contact. Product Code: PIM000007937. | Australia |
| A-C® 316A | A-C® 316A is a oxidized polyethylene (HDOxPEs) homopolymer, in a finer powder form that had a hard, high drop point & high density. A-C® 316A offers the benefts in PVC processing & fusion control as a metal release agent. A-C® 316A will not affect clarity in transparent PVC applications. Very effective for use in processing PVC regrind. Group: Specialty chemicals, polymers. CAS No. 68441-17-8. Composition: Oxidized Polyethylene. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Thermoplastic Transformers. Function: Waxes, POLYMERS, PVC. Physical Form: Micronized Powder. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007907. | Australia |
| A-C 325 | A-C 325 is a hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion resistance by lowering the coefficient of friction. In textiles, this can help improve sewability and fabric cutting, extending cutting machine lifetime. Its acid number of 25 allows it to be emulsified into water. Can also provide heat resistance to hot melt adhesives (HMAs). Group: Specialty chemicals, polymers. CAS No. 68441-17-8. Composition: OPE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007915. | Australia |
| A-C 330 | A-C 330 is a hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion resistance by lowering the coefficient of friction. In textiles, can help improve sewability and fabric cutting, extending cutting machine lifetime. Its acid number is 30, which allows it to be emulsified into water. Can also provide heat resistance to hot melt adhesives (HMAs). Group: Specialty chemicals, polymers, paints & coatings. CAS No. 68441-17-8. Composition: OPE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Can, Coil and Industrial. Function: Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007921. | Australia |
| A-C® 3325 | A-C® 3325 is a hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion resistance by lowering the coefficient of friction. In textiles, this can help improve sewability and fabric cutting, extending cutting machine lifetime. Its acid number of 25 allows it to be emulsified into water. Can also provide heat resistance to hot melt adhesives (HMAs). Group: Specialty chemicals, polymers. CAS No. 68441-17-8. Composition: OPE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007925. | Australia |
| A-C® 3330 | A-C® 3330 is hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion resistance by lowering the coefficient of friction. In textiles, can help improve sewability and fabric cutting, extending cutting machine lifetime. Its acid number is 30, which allows it to be emulsified into water. Can also provide heat resistance to hot melt adhesives (HMAs). Group: Specialty chemicals, polymers. CAS No. 68441-17-8. Composition: OPE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007926. | Australia |
| A-C 392 | A-C 392 is hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion resistance by lowering the coefficient of friction. In textiles, can help improve sewability and fabric cutting, extending cutting machine lifetime. Its acid number of 30 allows it to be emulsified into water. Can also provide heat resistance to hot melt adhesives (HMAs). Additionally, it is an effective metal release agent for cellular PVC applications. Group: Specialty chemicals, polymers. CAS No. 68441-17-8. Composition: OPE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.3~0.5%. Certification: REACH. Product Code: PIM000007923. | Australia |
| A-C 6 | A-C 6 is a low density polyethylene (LDPE) homopolymer in a prill form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. Can also be partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. Used in cable flooding compounds, along with polybutene. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 9002-88-4. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Adhesives & Sealants. Function: Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.1~2%. Certification: REACH. Product Code: PIM000007910. | Australia |
| A-C® 617 | A-C® 617 is a low density polyethylene (LDPE) homopolymer in a prill form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. Can also be partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. Is used as a dispersing agent in color masterbatch applications. In PVC applications it finds use as an external lubricant. Group: Specialty chemicals, polymers. Composition: EVA WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007918. | Australia |
| A-C® 617A | A-C® 617A is a low density polyethylene (LDPE) homopolymer in a powdered form. A-C® 617A displays the function in improving surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. A-C® 617A can also be partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. In PVC applications it finds use as an external lubricant. Group: Specialty chemicals, polymers. CAS No. 9002-88-4. Composition: Low Density Polyethylene. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Thermoplastic Transformers. Function: Waxes, POLYMERS, PVC. Physical Form: Micronized Powder. Recommended Dosage: 1.0%. Certification: REACH. Product Code: PIM000007913. | Australia |
| A-C 629 | A-C 629 is a low density Oxidized Polyethylene (LDOxPE) homopolymer in prill form for use in solvent borne coatings as a rheological aid. It also finds use as a metal release agent in PVC. It can also be atmospherically emulsified for use in aqueous applications, such as textiles, lubricants, coatings and inks, to lower the COF and provide surface properties such as mar & abrasion resistance and increased slip. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 68441-17-8. Composition: OPE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Others. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007914. | Australia |
| A-C® 629A | A-C® 629A is a Low density Oxidized Polyethylene (LDOxPE) homopolymer in prill form for use in solvent borne coatings as a rheological aid. It also finds use as a metal release agent in PVC. It is a pigment dispersing agent for color masterbatch. A-C® 629A can also be atmospherically emulsified for use in aqueous applications, such as textiles, lubricants, coatings and inks, to lower the COF and provide surface properties such as mar & abrasion resistance and increased slip. Group: Specialty chemicals, polymers. CAS No. 68441-17-8. Composition: Low Density Oxidized Polyethylene. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: Waxes, Dispersing Agents. Physical Form: Solid. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007905. | Australia |
| A-C 680 | A-C 680 is low density Oxidized Polyethylene (LDOxPE) homopolymer in prill form for use in solvent borne coatings as a rheological aid. It can also be atmospherically emulsified for use in aqueous applications, such as textiles, lubricants, coatings and inks, to lower the COF and provide surface properties such as mar &, abrasion resistance and increased slip. It can also be used as an anti transpirant coating to delay fruit spoilage allowing longer storage and transport times. It also finds use as a metal release agent in PVC. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 68441-17-8. Composition: OPE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Others. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 2.0%. Certification: REACH. Product Code: PIM000007927. | Australia |
| A-C® 6A | A-C® 6A is a homopolymer in a powdered form; for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. A-C® 6A can be also partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. Used in cable flooding compounds, along with polybutene. Is used as a dispersing agent in color masterbatch applications. Group: Specialty chemicals, polymers, paints & coatings. CAS No. 9002-88-4. Composition: Low Density Polyethylene. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Powder Coating, Printing Inks. Function: Waxes, Dispersing Agents, POLYMERS, Polystyrene (PS). Physical Form: Micronized Powder. Recommended Dosage: 0.1~2%. Certification: REACH, Food Contact, PICCS. Product Code: PIM000007906. | Australia |
| A-C 8 | A-C 8 is low density polyethylene (LDPE) homopolymer in a prill form, for use in solvent borne coatings, heatset and liquid solvent borne inks,to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. Can also be partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. Group: Specialty chemicals, polymers. CAS No. 9002-88-4. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.5%. Certification: REACH. Product Code: PIM000007922. | Australia |
| A-C® 9A | A-C® 9A is low density polyethylene (LDPE) homopolymer in a powdered form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. Can also be partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. Best choice in cable filling compounds to prevent oil bleed at high temperatures. Is used as a dispersing agent in color masterbatch applications. Group: Specialty chemicals, polymers. CAS No. 9002-88-4. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.1~2%. Certification: REACH. Product Code: PIM000007929. | Australia |
| ACUMIST A-12 | ACUMIST A12 is Micronized Oxidized Polyethylene Homopolymer for use in water based coatings, flexographic and gravure inks and overprint varnishes. It also can be used as a processing aid, matting and antissetling agent in paints. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 68441-17-8. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Adhesives & Sealants. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.5~1%. Certification: REACH. Product Code: PIM000007936. | Australia |
| ACUMIST C-5 | ACUMIST C-5 is medium particle size micronized Polyethylene Homopolymer for use in solvent borne coatings and solvent based flexographic inks. As with all ACumist products, it is insoluble in solvents and UV based monomers and oligomers at room temperature. best suited goroffset inks, can coatings , and all thin film solvent based coatings. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 68441-17-8. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Adhesives & Sealants. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.5~1%. Certification: REACH. Product Code: PIM000007930. | Australia |
| ACUMIST D-6 | ACUMIST D-6 is micronized Polyethylene Homopolymer for use and general purpose solvent borne coatings, stains and lacquers, and gravure inks. It provides a good balance of properties where economics are of paramount concern. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 68441-17-8. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Adhesives & Sealants. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.5~1%. Certification: REACH. Product Code: PIM000007933. | Australia |
| ACUMIST D-9 | D-9 Micronized Polyethylene Homopolymer for use general purpose solvent borne coatings, stains and lacquers, and gravure inks. It provides a good balance of properties where economics are of paramount concernMostlu used in Gravure inks for slip and rubs. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 68441-17-8. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Adhesives & Sealants. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.5~1%. Certification: REACH. Product Code: PIM000007934. | Australia |
| CETOMACROGOL 1000 | CETOMACROGOL 1000 is the tradename for polyethylene glycol hexadecyl ether. Cetomacrogol cream is a light, non-greasy moisturizer or emollient, used to treat dry skin conditions such as eczema, dermatitis and psoriasis. It can also be used as a base for the preparation of Hydrocortisone cream and other topical preparations. Group: Pharmaceutical ingredients, excipients. CAS No. 9004-95-9. Composition: Polyethyleneglycol cetyl, Stearyl, Ether. Application: Topical. Function: Emollient. Physical Form: Flakes. Product Code: PIM000009504. | Australia |
| EXTOS® ET-8010 | EXTOS is a new type of CSM with improved dynamic and low temperature properties. ET-8010__Good dynamic and low temperature properties Vulcanizing adhesion with EPDM is possible & Good resistance to cold, offering better dynamic fatigue resistance. Key Application: Automotive parts: Synchronous timing belts, poly-V-belts, coverings for the weatherstrips, Train parts : Coupling coverings, Engineering and building articles: Building gaskets. Group: Specialty chemicals, polymers. Composition: Alkylated Polyethylene. Application: Rubber & Elastomers. Physical Form: Solid. Product Code: PIM000032222. | Australia |
| EXTOS® ET-8510 | EXTOS is a new type of CSM with improved dynamic and low temperature properties. ET-8510__Oil resistance, Similar to ET-8010 in all respects, with good resistance to oil. Key Application: Automotive parts: Synchronous timing belts, poly-V-belts, coverings for the weatherstrips, Train parts : Coupling coverings, Engineering and building articles: Building gaskets. Group: Specialty chemicals, polymers. Composition: Alkylated Polyethylene. Application: Rubber & Elastomers. Physical Form: Solid. Product Code: PIM000032223. | Australia |
| FINE-BLEND CMG5804 | FINE-BLEND CMG5804 is a maleic anhydride grafted polymer. The base polymer is high density polyethylene, and it has white or light yellow particle appearance. FINE-BLEND CMG5804 can be used in low-smoke halogen-free flame-retardant wire and cable system and wood plastics composite (WPC) system as compitibilizer which can improve the properties of matrix material. Group: Specialty chemicals, polymers. Composition: PE-g-MAH. Application: Masterbatch & Compounders. Function: ADDITIVES, Dispersing Agents. Physical Form: Solid. Product Code: PIM000005688. | Australia |
| FLORABEADS JOJOBA 60/100 WHITE (NATURAL) | Acts as an exfoliating agent. They are free-flowing, botanical microspheres of jojoba esters. Provides gentle and effective exfoliation as well as visual appeal to the skin. It is superior to pumice, nutshells and polyethylene exfoliants. It is botanical, non-irritant and hypoallergenic. Does not cause microlacerations to the skin. Possesses deposition of jojoba emolliency. Finely polishes the outer surface of the skin, decreases fine lines and wrinkles and reveals a new layer of healthy skin cells for a radiant, rejuvenated appearance. Used in facial care products, bar, liquid soaps, body polishers, creams, lotions, skin care and color cosmetic products. Uses: Decorative cosmetics/Make-up Skin care (Facial care, Facial cleansing, Body care, Baby care, Exfoliating products) Bar and liquid soaps, Body polishers. Group: Personal Care; Cosmetic Raw Materials; Exfoliants. Alternative Name: Jojoba Esters. Grade: Cosmetic Ingredients. CAS Number: 61789-91-1 or 92457-12-0. Pack Sizes: 50g, 100g, 250g, 500 grams, 1kg, 5 kgs. | Australia & Worldwide |
| GLUCAM DOE-120 (PEG-120 METHYL GLUCOSE DIOLEATE) | It is the polyethylene glycol ether of the diester of methyl glucose and oleic acid with an average of 120 moles of ethylene oxide. It works as a thickening agent for clear surfactant systems. Uses: Skin care and Hair care. Group: Personal Care; Cosmetic Raw Materials; Thickeners. Alternative Name: PEG-120 Methyl Glucose Dioleate. Grade: Cosmetic Ingredients. CAS Number: 86893-19-8. Pack Sizes: 500 grams, 1kg, 5 kgs, 10kg, 20kg. Similar to: AEC PEG-120 Methyl Glucose Dioleate (A & E Connock (Perfumery & Cosmetics) Ltd.), Antil 127 (Evonik Industries AG), Antil 120 Plus (Evonik Industries AG), Glucamate DOE-120 Syrup Thickener (Lubrizol Advanced Materials, Inc.), Glucamate DOE-120 Thickener (Lubrizol Advanced Materials, Inc.), Ritacam DOE-120 (RITA Corporation). | Australia & Worldwide |
| GLUCAM SSE-20 (PEG-20 METHYL GLUCOSE SESQUISTEARATE) | It is the polyethylene glycol ether of the mono and diesters of methyl glucose and stearic acid with an average of 20 moles of ethylene oxide. It works as an O/W emulsifier. Uses: Skin and Hair care. Group: Personal Care; Cosmetic Raw Materials; Emulsifiers. Alternative Name: PEG-20 Methyl Glucose Sesquistearate. Grade: Cosmetic Ingredients. CAS Number: 86893-19-8. Pack Sizes: 500 grams, 1kg, 5 kgs, 10kg, 20kg. Similar to: Glucamate SSE-20 Emulsifier (Lubrizol Advanced Materials, Inc.), Ritacam SSE-20 (RITA Corporation). | Australia & Worldwide |
| HONEYWELL A-C® 20A | HONEYWELL A-C® 20A is used in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. Can also be partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. Used in cable flooding compounds, along with polybutene. Group: Specialty chemicals, polymers. CAS No. 12003-38-2, 18282-10-5, 13463-67-15. Composition: Low Density Polyethylene. Application: Masterbatch & Compounders. Function: POLYMERS, Other. Physical Form: Solid. Product Code: PIM000038566. | Australia |
| J-392G35 | J-392G35 is a high-density polyethylene wax emulsion designed to be used in coatings to improve scuff, scratch, and buffability. Group: Personal care ingredients, homecare & institutional cleaning. CAS No. 68131- 39- 5. Composition: Mineral. Application: Floor & Surface Cleaner. Function: Coating Agent. Physical Form: Liquid. Product Code: PIM000037629. | Australia |
| J-392G35 | J-392G35 is a nonionic polyethylene emulsion that provides great black heel resistance, toughness, buffability, and mar resistance for floor polish formulation. Please see the specification sheet below and for further details contact our local sales representative today. Group: Specialty chemicals, paints & coatings, polymers. Composition: High density polyethylene. Application: Polymer Producers, Lamination and Converting. Function: ADDITIVESOther. Physical Form: Liquid. Product Code: PIM000054002. | Australia |
| KELIREN® CPE 3610 | KELIREN® CPE 3610 is a random and saturated thermoplastic resin. It has very good extruding flowability when blended with PVC. KELIREN® CPE 3610 is suitable for PVC profiles and compression moulding products. Please see the specification sheet below and for further details contact our local sales representative today. Group: Specialty chemicals, polymers. CAS No. 63231-66-3. Composition: Chlorinated Polyethylene Resin. Application: Thermoplastic Transformers. Function: ADDITIVES, Other, POLYMERS, PVC. Physical Form: Micronized Powder. Product Code: PIM000042716. | Australia |
| LIPOXOL 1000 | LIPOXOL 1000 Polyethlylenglycol Medical Grade: Used in medication to treat constipation in children and adults. It is also used to empty the bowels before a colonoscopy. Lower-molecular-weight variants are used as solvents in oral liquids and soft capsules, whereas solid variants are used as ointment bases, tablet binders, film coatings, and lubricants. It is also used in lubricating eye drops. Group: Pharmaceutical ingredients, excipients. CAS No. 25322-68-3. Composition: Polyethylene Glycol. Application: Oral, Tablets, Pellets, Powder. Function: Gastrointestinal Agents. Physical Form: Liquid. Certification: USP/NF, EP. Product Code: PIM000009557. | Australia |
| LIPOXOL 1500 | LIPOXOL 1500 In film coatings, solid grades of polyethylene glycol can be used alone for the film-coating of tablets or can be useful as hydrophilic polishing materials. Solid grades are also widely used as plasticizers in conjunction with film-forming polymers. The presence of polyethylene glycols in film coats, especially of liquid grades, tends to increase their water permeability and may reduce protection against low pH in enteric-coating films. Polyethylene glycols are useful as plasticizers in microencapsulated products to avoid rupture of the coating film when the microcapsules are compressed into tablets. Group: Pharmaceutical ingredients, excipients. CAS No. 25322-68-3. Composition: Polyethylene Glycol. Application: Oral, Tablets, Pellets, Powder. Function: Plasticizer, Tablet Coating. Physical Form: Flakes. Certification: USP/NF, EP. Product Code: PIM000009558. | Australia |
| LIPOXOL 300 | LIPOXOL 300 In film coatings, solid grades of polyethylene glycol can be used alone for the film-coating of tablets or can be useful as hydrophilic polishing materials. Solid grades are also widely used as plasticizers in conjunction with film-forming polymers. The presence of polyethylene glycols in film coats, especially of liquid grades, tends to increase their water permeability and may reduce protection against low pH in enteric-coating films. Polyethylene glycols are useful as plasticizers in microencapsulated products to avoid rupture of the coating film when the microcapsules are compressed into tablets. Group: Pharmaceutical ingredients, excipients. CAS No. 25322-68-3. Composition: Polyethylene Glycol. Application: Oral, Tablets, Pellets, Powder. Function: Plasticizer, Tablet Coating. Physical Form: Liquid. Certification: USP/NF, EP. Product Code: PIM000009559. | Australia |
| LIPOXOL 3350 | LIPOXOL 3350 In film coatings, solid grades of polyethylene glycol can be used alone for the film-coating of tablets or can be useful as hydrophilic polishing materials. Solid grades are also widely used as plasticizers in conjunction with film-forming polymers. The presence of polyethylene glycols in film coats, especially of liquid grades, tends to increase their water permeability and may reduce protection against low pH in enteric-coating films. Polyethylene glycols are useful as plasticizers in microencapsulated products to avoid rupture of the coating film when the microcapsules are compressed into tablets. Group: Pharmaceutical ingredients, excipients. CAS No. 25322-68-3. Composition: Polyethylene Glycol. Application: Oral, Tablets, Pellets, Powder. Function: Plasticizer, Tablet Coating. Physical Form: Flakes. Certification: USP/NF, EP. Product Code: PIM000009560. | Australia |
| LIPOXOL 600 | LIPOXOL 600 Polyethlylenglycol Medical Grade: Used in medication to treat constipation in children and adults. It is also used to empty the bowels before a colonoscopy. Lower-molecular-weight variants are used as solvents in oral liquids and soft capsules, whereas solid variants are used as ointment bases, tablet binders, film coatings, and lubricants. It is also used in lubricating eye drops. Group: Pharmaceutical ingredients, excipients. CAS No. 25322-68-3. Composition: Polyethylene Glycol. Application: Oral, Tablets, Pellets, Powder. Function: Plasticizer, Tablet Coating. Physical Form: Liquid. Certification: USP/NF, EP. Product Code: PIM000009562. | Australia |
| LIPOXOL 6000 | LIPOXOL 6000 in film coatings, solid grades of polyethylene glycol can be used alone for the film-coating of tablets or can be useful as hydrophilic polishing materials. Solid grades are also widely used as plasticizers in conjunction with film-forming polymers. The presence of polyethylene glycols in film coats, especially of liquid grades, tends to increase their water permeability and may reduce protection against low pH in enteric-coating films. Polyethylene glycols are useful as plasticizers in microencapsulated products to avoid rupture of the coating film when the microcapsules are compressed into tablets. Group: Pharmaceutical ingredients, excipients. CAS No. 25322-68-3. Composition: Polyethylene Glycol. Application: Oral, Tablets, Pellets, Powder. Function: Plasticizer. Physical Form: Powder. Certification: USP/NF, EP. Product Code: PIM000009563. | Australia |
| LIPOXOL 8000 | LIPOXOL 8000 in film coatings, solid grades of polyethylene glycol can be used alone for the film-coating of tablets or can be useful as hydrophilic polishing materials. Solid grades are also widely used as plasticizers in conjunction with film-forming polymers. The presence of polyethylene glycols in film coats, especially of liquid grades, tends to increase their water permeability and may reduce protection against low pH in enteric-coating films. Polyethylene glycols are useful as plasticizers in microencapsulated products to avoid rupture of the coating film when the microcapsules are compressed into tablets. Group: Pharmaceutical ingredients, excipients. CAS No. 25322-68-3. Composition: Polyethylene Glycol. Application: Oral, Tablets, Pellets, Powder. Function: Plasticizer. Physical Form: Powder. Certification: USP/NF, EP. Product Code: PIM000009564. | Australia |
| LLDPE 6110 UV | 6110 UV is a LLDPE ground powder with a typical particle size of 90% <500 micron. 6110 UV meets the requirements AS 2070 for food contact. Group: Specialty chemicals, paints & coatings. CAS No. 9002-88-4. Composition: Polyethylene Powders. Application: CanCoil and Industrial. Function: ADDITIVESOther. Physical Form: Micronized Powder. Product Code: PIM000085216. | Australia |
| LUNA-NOX 1076-J | LUNA-NOX 1076-J is a hindered phenol antioxidant, widely used in polymers including polypropylene, polyethylene, polystyrene, polyamide, ABS, and synthetic rubbers. It is also an effective antioxidant in oils and paints. LUNA-NOX 1076-J is odourless, tasteless, low toxicity (LD50≥10000mg/kg) and light-stable, and is recommended for use at 0.1 - 0.3% dosage rate. Group: Specialty chemicals, polymers. CAS No. 2082-79-3. Composition: Octadecyl[β-(3.5-di-tert-butyl-4-hydroxyphenyl)-propionate]. Application: Thermoplastic Transformers. Function: Antioxidants. Physical Form: Micronized Powder. Product Code: PIM000060531. | Australia |
| NUOSPERSE® FN 265 | NUOSPERSE® FN 265 is a pigment wetting and dispersing agent. Group: Specialty chemicals, paints & coatings. CAS No. 9004-98-2. Composition: Polyethylene glycol monooleyl ether. Application: CanCoil and Industrial. Function: Dispersing Agents. Physical Form: Liquid. Product Code: PIM000002169. | Australia |
| SILANE USI-7301 | SILANE USI-7301 is an essential silane coupling agent that appears in a colourless transparent liquid. SILANE USI-7301 offers a variety of functions like reinforcing agent and crosslink agent, rubber process auxiliary agent, anti-mildew agent and deodorant finishing agent, antistatic agent, blood coagulant agent, marine organism anti-fouling agent, liquid crystal alignment agent and electric control agents in electronics copier imaging agent. SILANE USI-7301can be used in a wide range of applications in compound material, ink, gluewater and sealant material, neoprene rubber, chlorobutyl rubber, chlorosulfonated polyethylene rubber. Group: Specialty chemicals, polymers. CAS No. 2530-87-2. Composition: Y-Chloropropyltrimethoxysilan. Application: Thermoplastic Transformers, Rubber & Elastomers. Function: POLYMERS, Other. Physical Form: Liquid. Product Code: PIM000039983. | Australia |
| SLIP-AYD® SL 177 | SLIP-AYD® SL 177 surface conditioner provides improved surface characteristics of coatings. This is one of several wax types dispersed in a variety of water/solvent/vehicle blends. APPLICATIONS: General industrial coatings, Coil coatings, Wood finishes, Plastic coatings, Auto OEM and refinish. Group: Specialty chemicals, paints & coatings. Composition: Polyethylene Wax. Application: CanCoil and Industrial. Physical Form: Paste. Product Code: PIM000031788. | Australia |
| SOREZ 100 POLYMER | SOREZ 100 POLYMER is a modified polyester copolymer concentrate in water-soluble form. The product imparts wicking properties to hydrophobic textiles. It provides soil-release and anti-redeposition properties while reducing the electrostatic charge of treated polyester. The polymer forms a thin film on the substrate, enabling effective soil removal during subsequent wash cycles. Group: Personal care ingredients, homecare & institutional cleaning. CAS No. 9016-88-0. Composition: Polymer. Application: Laundry, Dishwashing. Function: Film Forming. Physical Form: Liquid. Recommended Dosage: 0.25 - 1.5%. INCI Name: Polyethylene Glycol Polyester Copolymer. Product Code: PIM000004972. | Australia |
| THIXATROL® P200A | THIXATROL® P200A is a pre-dispersed polyamide wax suitable for use under less than optimum dispersion conditions and as a post addable thixotropic rheological additive that is useful in a wide range of solvents. Group: Specialty chemicals, paints & coatings. Composition: Polyethylene Wax. Application: CanCoil and Industrial. Physical Form: Paste. Product Code: PIM000031789. | Australia |
| TOSO-CSM® CN-1500 | Chlorosulphonated polyethylene (CSM) is a special synthetic rubber manufactured through chlorination and chlorosulphonation of polyethylene. CN-1500 Good solubility, low solution viscosity, oil resistance with superior solubility as an organic solvent. Key Application: Paints & Coating. Group: Specialty chemicals, paints & coatings. Composition: Polyethylene. Application: Adhesives & Sealants. Physical Form: Solid. Product Code: PIM000032221. | Australia |
| TOSO-CSM® TS-320 | Chlorosulphonated polyethylene (CSM) is a special synthetic rubber manufactured through chlorination and chlorosulphonation of polyethylene. Key Application: Waterproof sheets, magnetic rubbers, etc. Group: Specialty chemicals, polymers. Composition: Polyethylene. Application: Rubber & Elastomers, Thermosets & Composites. Physical Form: Solid. Product Code: PIM000032219. | Australia |
| TOSO-CSM® TS-340 | Chlorosulphonated polyethylene (CSM) is a special synthetic rubber manufactured through chlorination and chlorosulphonation of polyethylene. TS-340__Good solubility, low solution viscosity, oil resistance with superior solubility as an organic solvent. Key Application: Paints & Coating. Group: Specialty chemicals, paints & coatings. Composition: Polyethylene. Application: Adhesives & Sealants. Physical Form: Solid. Product Code: PIM000032220. | Australia |
| TOSO-CSM® TS-430 | Chlorosulphonated polyethylene (CSM) is a special synthetic rubber manufactured through chlorination and chlorosulphonation of polyethylene. Key Application: Conventional Molding Parts. Group: Specialty chemicals, polymers. Composition: Polyethylene. Application: Rubber & Elastomers, Thermosets & Composites. Physical Form: Solid. Product Code: PIM000032216. | Australia |
| TOSO-CSM® TS-530 | Chlorosulphonated polyethylene (CSM) is a special synthetic rubber manufactured through chlorination and chlorosulphonation of polyethylene. Key Application: Conventional Molding Parts. Group: Specialty chemicals, polymers. Composition: Polyethylene. Application: Rubber & Elastomers, Thermosets & Composites. Physical Form: Solid. Product Code: PIM000032215. | Australia |
| TOSO-CSM® TS-830 | Chlorosulphonated polyethylene (CSM) is a special synthetic rubber manufactured through chlorination and chlorosulphonation of polyethylene. Key Application: High Loading Types. Group: Specialty chemicals, polymers. Composition: Polyethylene. Application: Polymer Producers. Physical Form: Solid. Product Code: PIM000032217. | Australia |
| TOSO-CSM® TS-930 | Chlorosulphonated polyethylene (CSM) is a special synthetic rubber manufactured through chlorination and chlorosulphonation of polyethylene. Key Application: High Loading Types. Group: Specialty chemicals, polymers. Composition: Polyethylene. Application: Polymer Producers. Physical Form: Solid. Product Code: PIM000032218. | Australia |
| XIAMETER OFX-0193 FLUID | XIAMETER OFX-0193 Fluid is a silicone polyether copolymer, is a graft style hydrolytically stable silicone polyether surfactant with a calculated HLB of 12. Group: Specialty chemicals, paints & coatings. Composition: Polyethylene glycol. Application: Construction, Architectural and Deco. Physical Form: Liquid. Product Code: PIM000031771. | Australia |
Our database is helping our users find suppliers everyday.
