Find where to buy products from Australian suppliers, including: distributors, industrial manufacturers, bulk supplies and wholesalers of raw ingredients & finished goods.
Search for products or services, then visit the suppliers website for prices, SDS or more information. You can also view suppliers in NZ, UK or the USA.
| Product | Description | |
|---|---|---|
| 3M GLASS BUBBLES K25 | 3M glass bubbles K25 ideal additives for shallow water buoyancy applications or processing applications where high strength is needed. In addition, like all 3M glass bubbles, K25 bubbles are compatible with thermoset resins like polyurethane and epoxy, and are virtually insoluble in water. Application: Paints and Coatings, Rubber and Plastic, Transportation. Group: Specialty chemicals, paints & coatings. Composition: Soda-lime-borosilicate glass. Application: Architectural and Deco., Adhesives & Sealants, Automotive Paints, Lamination and Converting, Powder Coating, Can, Coil and Industrial. Physical Form: Nano powder. Product Code: PIM000031758. |  Australia |
| CCC Ingredients | Premier supplier of specialist chemicals in Australia & New Zealand. We invite your enquiry no matter which application you may have in mind including: Agricultural, Automotive, Cleaning Products, Detergents, Food Ingredients & Processing, Fungicides, Herbicides, Laboratory Chemicals, Mining Industrial, Nutraceuticals, Personal Care, Petroleum and Oils, Pharmaceutical & Medical, Printing, Rubber, Surface Coatings, Textiles, Timber and Water Treatment Chemicals. Our Locations: Victoria, New South Wales, Queensland, Tasmania, South & Western Australia.featured listing |  CCC Ingredients: NSW, QLD, SA, WA, VIC, TAS |
| A-C® 1702 | A-C® 1702 is grease like, low temperature, completely amorphous, low density polyethylene (PE) homopolymer for use in solvent borne coatings, heat set, sheet fed solvent borne inks, and specialty digital and UV/EB inks to provide mar and rub resistance by lowering the coefficient of friction. Also used in lubricants to provide release. Will act as a plasticizer in paraffin based candles, especially large volume candles, to resist cracking. Group: Specialty chemicals, polymers. CAS No. 9002-88-4. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.1~2%. Certification: REACH. Product Code: PIM000007932. | Australia |
| A-C 316 | A-C 316 is a hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion resistance by lowering the coefficient of friction. In textiles, this can help improve sewability and fabric cutting, helping to extend cutting machine lifetime. Its acid number of 16 allows it to be emulsified into water. Can also provide heat resistance to hot melt adhesives (HMAs). In addition, may be used as a metal release agent for PVC processing and is a fusion control for PVC formulations. It will not affect clarity in transparent PVC applications. Very effective for use in processing PVC regrind. Group: Specialty chemicals, polymers. CAS No. 9002-88-4. Composition: OPE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.1~2%. Certification: REACH, Food Contact. Product Code: PIM000007937. | Australia |
| A-C® 316A | A-C® 316A is a oxidized polyethylene (HDOxPEs) homopolymer, in a finer powder form that had a hard, high drop point & high density. A-C® 316A offers the benefts in PVC processing & fusion control as a metal release agent. A-C® 316A will not affect clarity in transparent PVC applications. Very effective for use in processing PVC regrind. Group: Specialty chemicals, polymers. CAS No. 68441-17-8. Composition: Oxidized Polyethylene. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Thermoplastic Transformers. Function: Waxes, POLYMERS, PVC. Physical Form: Micronized Powder. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007907. | Australia |
| A-C 325 | A-C 325 is a hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion resistance by lowering the coefficient of friction. In textiles, this can help improve sewability and fabric cutting, extending cutting machine lifetime. Its acid number of 25 allows it to be emulsified into water. Can also provide heat resistance to hot melt adhesives (HMAs). Group: Specialty chemicals, polymers. CAS No. 68441-17-8. Composition: OPE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007915. | Australia |
| A-C 330 | A-C 330 is a hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion resistance by lowering the coefficient of friction. In textiles, can help improve sewability and fabric cutting, extending cutting machine lifetime. Its acid number is 30, which allows it to be emulsified into water. Can also provide heat resistance to hot melt adhesives (HMAs). Group: Specialty chemicals, polymers, paints & coatings. CAS No. 68441-17-8. Composition: OPE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Can, Coil and Industrial. Function: Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007921. | Australia |
| A-C® 3325 | A-C® 3325 is a hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion resistance by lowering the coefficient of friction. In textiles, this can help improve sewability and fabric cutting, extending cutting machine lifetime. Its acid number of 25 allows it to be emulsified into water. Can also provide heat resistance to hot melt adhesives (HMAs). Group: Specialty chemicals, polymers. CAS No. 68441-17-8. Composition: OPE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007925. | Australia |
| A-C® 3330 | A-C® 3330 is hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion resistance by lowering the coefficient of friction. In textiles, can help improve sewability and fabric cutting, extending cutting machine lifetime. Its acid number is 30, which allows it to be emulsified into water. Can also provide heat resistance to hot melt adhesives (HMAs). Group: Specialty chemicals, polymers. CAS No. 68441-17-8. Composition: OPE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007926. | Australia |
| A-C 392 | A-C 392 is hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion resistance by lowering the coefficient of friction. In textiles, can help improve sewability and fabric cutting, extending cutting machine lifetime. Its acid number of 30 allows it to be emulsified into water. Can also provide heat resistance to hot melt adhesives (HMAs). Additionally, it is an effective metal release agent for cellular PVC applications. Group: Specialty chemicals, polymers. CAS No. 68441-17-8. Composition: OPE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.3~0.5%. Certification: REACH. Product Code: PIM000007923. | Australia |
| A-C® 400 | A-C® 400 is an ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 13%, used extensively in hot melt adhesives (HMAs) to control rheology and boost adhesion. It can be added as a diluent but provides the dual function of reducing application viscosity at melt, while providing an adhesion boost versus homopolymer, non functional diluents (FT, byproduct, thermally degraded (TD) and PE homopolymer waxes). It is completely miscible in EVA adhesive resins, as would be expected by the similar chemistry. It is also used in candles to provide paraffin crystal nucleation, which increases thermal and breakage resistance, adhesion to glass, and fragrance retention. Group: Specialty chemicals, polymers. CAS No. 24937-78-8. Composition: EVA WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007916. | Australia |
| A-C® 400A | A-C® 400A is a Ethylene vinyl acetate (EVA) copolymer in powder form, with a VA content of 13%, used extensively in hot melt adhesives (HMAs) to control rheology and boost adhesion. A-C® 400A displays a good benefits in providing the dual function of reducing application viscosity at melt, while providing an adhesion boost versus homopolymer, non functional diluents. A-C® 400A is suitable to use in color masterbatch as dispersing agent, process aid for EVA-based wire and cable compounds. Group: Specialty chemicals, polymers. CAS No. 24937-78-8. Composition: Ethylene Vinyl Acetate. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: Waxes, Dispersing Agents, POLYMERS, EVA. Physical Form: Nano powder. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007908. | Australia |
| A-C 405M | A-C 405M is an ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 8%, for use in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 24937-78-8. Composition: EVA WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Automotive Paints. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007909. | Australia |
| A-C 405T | A-C 405T is an ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 6%, for use in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 24937-78-8. Composition: EVA WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Automotive Paints. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007911. | Australia |
| A-C® 540 | A-C® 540 is an ethylene acrylic acid (EAA) copolymer in a prill form, with an acrylic acid (AA) content of 5%, for use in adhesives to promote adhesion to various substrates. It is also used in aqueous floor polishes to provide drag (raising the coefficient of friction) thereby controlling the final coefficient of friction. Its acid number of 40 aids emulsification. Also used in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. Group: Specialty chemicals, polymers. Composition: EVA WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007917. | Australia |
| A-C 540A | A-C 540A is an ethylene acrylic acid (EAA) copolymer in a powdered form, with an acrylic acid (AA) content of 5%, for use in adhesives to promote adhesion to various substrates. It is also used in aqueous floor polishes to provide drag (raising the coefficient of friction) thereby controlling the final coefficient of friction. Its acid number of 40 aids emulsification. Also used in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. Is a dispersing agent for color masterbatch in engineering resins. Excellent external lubricant for polyamide compounds. Group: Specialty chemicals, polymers. CAS No. 9010-77-9. Composition: PP-PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 2.0%. Certification: REACH. Product Code: PIM000007912. | Australia |
| AC-580 | A-C 580 ethylene acrylic acid (EAA) copolymer in a prill form, with an acrylic acid (AA) content of 10%, for use in adhesives to promote adhesion to various substrates. It is also used in aqueous floor polishes to provide drag (raising the coefficient of friction) thereby controlling the final coefficient of friction. Its acid number of 75 aids emulsification. Also used in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. Group: Specialty chemicals, polymers. CAS No. 9002-88-4. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.1~2%. Certification: REACH. Product Code: PIM000007931. | Australia |
| A-C 6 | A-C 6 is a low density polyethylene (LDPE) homopolymer in a prill form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. Can also be partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. Used in cable flooding compounds, along with polybutene. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 9002-88-4. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Adhesives & Sealants. Function: Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.1~2%. Certification: REACH. Product Code: PIM000007910. | Australia |
| A-C® 617 | A-C® 617 is a low density polyethylene (LDPE) homopolymer in a prill form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. Can also be partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. Is used as a dispersing agent in color masterbatch applications. In PVC applications it finds use as an external lubricant. Group: Specialty chemicals, polymers. Composition: EVA WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007918. | Australia |
| A-C® 617A | A-C® 617A is a low density polyethylene (LDPE) homopolymer in a powdered form. A-C® 617A displays the function in improving surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. A-C® 617A can also be partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. In PVC applications it finds use as an external lubricant. Group: Specialty chemicals, polymers. CAS No. 9002-88-4. Composition: Low Density Polyethylene. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Thermoplastic Transformers. Function: Waxes, POLYMERS, PVC. Physical Form: Micronized Powder. Recommended Dosage: 1.0%. Certification: REACH. Product Code: PIM000007913. | Australia |
| A-C 629 | A-C 629 is a low density Oxidized Polyethylene (LDOxPE) homopolymer in prill form for use in solvent borne coatings as a rheological aid. It also finds use as a metal release agent in PVC. It can also be atmospherically emulsified for use in aqueous applications, such as textiles, lubricants, coatings and inks, to lower the COF and provide surface properties such as mar & abrasion resistance and increased slip. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 68441-17-8. Composition: OPE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Others. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007914. | Australia |
| A-C® 629A | A-C® 629A is a Low density Oxidized Polyethylene (LDOxPE) homopolymer in prill form for use in solvent borne coatings as a rheological aid. It also finds use as a metal release agent in PVC. It is a pigment dispersing agent for color masterbatch. A-C® 629A can also be atmospherically emulsified for use in aqueous applications, such as textiles, lubricants, coatings and inks, to lower the COF and provide surface properties such as mar & abrasion resistance and increased slip. Group: Specialty chemicals, polymers. CAS No. 68441-17-8. Composition: Low Density Oxidized Polyethylene. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: Waxes, Dispersing Agents. Physical Form: Solid. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007905. | Australia |
| A-C 680 | A-C 680 is low density Oxidized Polyethylene (LDOxPE) homopolymer in prill form for use in solvent borne coatings as a rheological aid. It can also be atmospherically emulsified for use in aqueous applications, such as textiles, lubricants, coatings and inks, to lower the COF and provide surface properties such as mar &, abrasion resistance and increased slip. It can also be used as an anti transpirant coating to delay fruit spoilage allowing longer storage and transport times. It also finds use as a metal release agent in PVC. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 68441-17-8. Composition: OPE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Others. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 2.0%. Certification: REACH. Product Code: PIM000007927. | Australia |
| A-C® 6A | A-C® 6A is a homopolymer in a powdered form; for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. A-C® 6A can be also partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. Used in cable flooding compounds, along with polybutene. Is used as a dispersing agent in color masterbatch applications. Group: Specialty chemicals, polymers, paints & coatings. CAS No. 9002-88-4. Composition: Low Density Polyethylene. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Powder Coating, Printing Inks. Function: Waxes, Dispersing Agents, POLYMERS, Polystyrene (PS). Physical Form: Micronized Powder. Recommended Dosage: 0.1~2%. Certification: REACH, Food Contact, PICCS. Product Code: PIM000007906. | Australia |
| A-C 8 | A-C 8 is low density polyethylene (LDPE) homopolymer in a prill form, for use in solvent borne coatings, heatset and liquid solvent borne inks,to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. Can also be partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. Group: Specialty chemicals, polymers. CAS No. 9002-88-4. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.5%. Certification: REACH. Product Code: PIM000007922. | Australia |
| A-C® 9A | A-C® 9A is low density polyethylene (LDPE) homopolymer in a powdered form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. Can also be partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. Best choice in cable filling compounds to prevent oil bleed at high temperatures. Is used as a dispersing agent in color masterbatch applications. Group: Specialty chemicals, polymers. CAS No. 9002-88-4. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.1~2%. Certification: REACH. Product Code: PIM000007929. | Australia |
| ACLYN® 285P | 2-Propenoic acid, polymer with ethene, sodium salt, used in PA, PET, PBT as nucleating agent of thermostability. Group: Specialty chemicals, polymers. CAS No. 25750-82-7. Composition: 2-Propenoic acid, polymer with ethene, sodium salt. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.3~1%. Product Code: PIM000007939. | Australia |
| ACLYN® 295A | A zinc ionomer of an EAA copolymer, in powdered form, is neutralized to 98%. Zinc can provide corrosion resistance. Used as a pigment dispersing agent for masterbatch in polar resin systems due to enhanced compatability with the resin carrier. Group: Specialty chemicals, polymers. CAS No. 28208-80-2. Composition: 2-Propenoic acid, polymer with ethene, zinc salt. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.3~1%. Product Code: PIM000007924. | Australia |
| ACUMIST A-12 | ACUMIST A12 is Micronized Oxidized Polyethylene Homopolymer for use in water based coatings, flexographic and gravure inks and overprint varnishes. It also can be used as a processing aid, matting and antissetling agent in paints. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 68441-17-8. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Adhesives & Sealants. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.5~1%. Certification: REACH. Product Code: PIM000007936. | Australia |
| ACUMIST C-5 | ACUMIST C-5 is medium particle size micronized Polyethylene Homopolymer for use in solvent borne coatings and solvent based flexographic inks. As with all ACumist products, it is insoluble in solvents and UV based monomers and oligomers at room temperature. best suited goroffset inks, can coatings , and all thin film solvent based coatings. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 68441-17-8. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Adhesives & Sealants. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.5~1%. Certification: REACH. Product Code: PIM000007930. | Australia |
| ACUMIST D-6 | ACUMIST D-6 is micronized Polyethylene Homopolymer for use and general purpose solvent borne coatings, stains and lacquers, and gravure inks. It provides a good balance of properties where economics are of paramount concern. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 68441-17-8. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Adhesives & Sealants. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.5~1%. Certification: REACH. Product Code: PIM000007933. | Australia |
| ACUMIST D-9 | D-9 Micronized Polyethylene Homopolymer for use general purpose solvent borne coatings, stains and lacquers, and gravure inks. It provides a good balance of properties where economics are of paramount concernMostlu used in Gravure inks for slip and rubs. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 68441-17-8. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Adhesives & Sealants. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.5~1%. Certification: REACH. Product Code: PIM000007934. | Australia |
| ACUMIST P-10 | ACUMIST P10 is micronized polypropylene for matting and non-skid or non-slip applications for industrial solvent coatings. Excellent abrasion resistance. Used in Powder Coating for matting and scratch resistance. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 68441-17-8. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Adhesives & Sealants. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.5~1%. Certification: REACH. Product Code: PIM000007935. | Australia |
| A-C X 1946 | Ethene, homopolymer, used in painting and powder painting, good transparancy, flatting agent, good abrasion performance and hand feeling, improving demould. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 9002-88-4. Composition: Ethene, homopolymer. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Automotive Paints. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007938. | Australia |
| ADK STAB 1178 | ADK STAB 1178 is made from tris nonyl phenol phosphite and appears in a yellowish liquid. ADK STAB 1178 displays an excellent colour improvement, heat stability and process stability. ADK STAB 1178 is suitable and recommended to use in rubber, polyolefins, ABS, PS and engineering plastics applications. Please see the specification sheet below and for further details contact our local sales representative today. Group: Specialty chemicals, polymers. CAS No. 26523-34-6. Composition: Tris nonyl phenol phosphite. Application: Thermoplastic Transformers, Rubber & Elastomers. Function: Natural Rubber, POLYMERS, ABS. Physical Form: Liquid. Product Code: PIM000045934. | Australia |
| ADK STAB C | ADK STAB C is made from Ethylhexyl Diphenyl Phosphite and appears in a clear liquid form. ADK STAB C displays an excellent colour improvement, heat stability and process stability. ADK STAB C is suitable and recommended to use in ABS, PVC and engineering plastics applications. Please see the specification sheet below and for further details contact our local sales representative today. Group: Specialty chemicals, polymers. CAS No. 15647-08-2. Composition: Ethylhexyl Diphenyl Phosphite. Application: Thermoplastic Transformers, Rubber & Elastomers. Function: POLYMERS, ABS, POLYMERS, PVC. Physical Form: Liquid. Product Code: PIM000045935. | Australia |
| ADK STAB TPP | ADK STAB TPP is made from Triphenyl Phosphite and appears in a yellowis liquid form. ADK STAB TPP displays an excellent colour improvement, heat stability and process stability. ADK STAB TPP is suitable and recommended to use in PU, PVC and rubber applications. Please see the specification sheet below and for further details contact our local sales representative today. Group: Specialty chemicals, polymers. CAS No. 101-02-0. Composition: Triphenyl Phosphite. Application: Thermoplastic Transformers, Rubber & Elastomers. Function: POLYMERS, Natural Rubber, PVC. Physical Form: Liquid. Product Code: PIM000045936. | Australia |
| ALUMINUM HYDROXIDE AH-1 | Aluminium hydroxide finds use as a fire retardant filler for polymer applications. It is selected for these applications because it is colorless (like most polymers), inexpensive, and has good fire retardant properties. It decomposes at about 180 °C (356 °F), absorbing a considerable amount of heat in the process and giving off water vapour. In addition to behaving as a fire retardant, it is very effective as a smoke suppressant in a wide range of polymers, most especially in polyesters, acrylics, ethylene vinyl acetate, epoxies, PVC and rubber. Group: Specialty chemicals, polymers. CAS No. 21645-51-2. Composition: Alumina Trihydrate / ATH. Application: Masterbatch & Compounders. Function: ADDITIVESFlame retardants. Physical Form: Nano powder. Product Code: PIM000086960. | Australia |
| AMINOX STABILIZER | AMINOX STABILIZER is a dark green/brown drops. Group: Specialty chemicals, polymers. CAS No. 68412-48-6. Composition: Reaction of diphenylamine & acetone. Application: Rubber & Elastomers. Function: ADDITIVES, Antioxidants. Physical Form: Solid. Product Code: PIM000004042. | Australia |
| Ammonia Solution 25% | AMMONIA SOLUTION 25% is commonly used for textiles, manufacture of rayon, rubber, fertilizers, refrigeration, condensation polymerization, pharmaceuticals. ammonia soaps, lubricants, ink manufacture, explosives, ceramics, detergents, food additives and household cleaners. Use as per technical advice specific to industry only. Pack Sizes: 20 Litres, 192 Litre. Product ID: WC359. Chemicals By Industry, Universal Products. |  Australia Wide |
| Ammonium Bicarbonate | Ammonium Bicarbonate (compound formula NH4(C(=O)OHO)), also known as bicarbonate of ammonia, ammonium hydrogen carbonate, hartshorn, or powdered baking ammonia, is the bicarbonate salt of ammonia. Ammonium Bicarbonate is used extensively in the food industry as a raising agent and leavening agent in baking. It has other uses, albeit to a lesser extent, in the fertiliser, wood treatment, plastic and rubber industries. Grades: Food and Technical with anti-caking agent available. Pack Sizes: MOQ is 1 pallet/1mt - We don't supply in a small quantities. Norkem your first link in the chemical chain. |  Australia |
| ANOX BB 2777 STABILIZER BLEND | ANOX BB 2777 STABILIZER BLEND is an amber powder or drop. Group: Specialty chemicals, polymers. CAS No. 4061-76-1. Composition: Binary synergistic blend. Application: Rubber & Elastomers. Function: ADDITIVES, Catalysts - crosslinkers. Physical Form: Solid. Product Code: PIM000004043. | Australia |
| AOX52 | AOX52 is a highly concentrated, free flowing powder with strong antimicrobial activities. It can be added to different kinds of paints and lacquers (water based, solvent based, solvent free) as well as to thermoplastic materials (PP, PE, TPU, PU, ABS, PA etc.). Group: Specialty chemicals, polymers, paints & coatings. Composition: Powder with strong antimicrobial activities. Application: Can, Coil and Industrial, Masterbatch & Compounders, Medical Application, Powder Coating, Rubber & Elastomers. Function: ADDITIVESBiocides. Physical Form: Micronized Powder. Product Code: PIM000009014. | Australia |
| APARPRENE® TPE 055 ANS | Aparprene® TPE-055 AN S is a 100% recyclable and UV stabilized, crosslinked polypropylene and ethylene propylene diene monomer vulcanizate (PP + EPDM TPV) grade. Aparprene® TPE-055 AN S offers high flow, thermal stability, weatherability, easy processing and colourability, shorter cycle times, lower energy consumption and a wide range of service temperatures -40°C to 120°C. Provides a soft and rubbery feel, good sealing flexibility performance and compression set like rubber. Exhibits resistance to ageing, ozone and chemical (acids, alkalis and alcohol). Designed for injection and extrusion methods. Aparprene® TPE-055 AN S is possibly used for appliances, automobiles, electrical, consumer goods, food, irrigation, health and personal care products, construction and mechanical rubber goods. Group: Specialty chemicals, polymers. CAS No. 104521-01-9, 9003-07-0, 99551-14-1, 1317-65-3. Composition: Styrene-ethylene-butylene Styrene-block Copolymer, Polypropylene, Calcium CarbonateMineral Oil. Application: Rubber & Elastomers, Thermoplastic Transformers. Function: POLYMERSOther. Physical Form: Solid. Product Code: PIM000055317. | Australia |
| ATH (Aluminum Trihydrate) | ATH (Aluminum Trihydrate). Group: Industrial materials and chemicals / fire protection / flame retardant additives. plastic & rubber / flame retardants. |  |
| AVANDISS 765 | AVANDISS 765 is a nontoxic, permanent and colourable antistatic for polymers with low melting point, SBS, SEBS, EVA, PP, PE. Effective and stable under different humidity conditions. Valid for extrusion and injection process. Wide conductivity range (107 to 1011. ohms). Antistatic applications like shoe, soling, electronic packaging, fitting, jerrycans, computer housing or anti-dust applications like TV and audio-visual parts. Group: Specialty chemicals, polymers. Composition: Antistatic agent. Application: Fibers, Textiles & Films, Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Thermoplastic Transformers. Function: Antistatic additives. Physical Form: Dispersion. Product Code: PIM000007240. | Australia |
| AVANION 13 | AVANION 13 is specially designed for applications in polyether based polyurethanes. AVANION solutions for PU are powerful antistatic agents, based on a complex dispersion of ionic conductors in polyglycols, specially designed to generate ESD/antistatic systems. They are good for colour formulations, stable in the time and does not alter the original material mechanical properties (shore, bending module, traction, etc.). Group: Specialty chemicals, polymers. Composition: Antistatic agent. Application: Rubber & Elastomers, Masterbatch & Compounders. Function: Antistatic additives. Physical Form: Dispersion. Product Code: PIM000007251. | Australia |
| AVANION 5 | AVANION 5 is specially designed for applications in polyether and polyester based polyurethanes. AVANION solutions for PU are powerful antistatic agents, based on a complex dispersion of ionic conductors in polyglycols, specially designed to generate ESD/antistatic systems. They are good for colour formulations, stable in the time and does not alter the original material mechanical properties (shore, bending module, traction, etc.). Group: Specialty chemicals, polymers. Composition: Antistatic agent. Application: Rubber & Elastomers, Masterbatch & Compounders. Function: Antistatic additives. Physical Form: Dispersion. Product Code: PIM000007250. | Australia |
| AVANNATUR EVASTAT 850 | AVANNATUR EVASTAT 850 is a non-toxic permanent antistatic to introduce in EVA injection compound. The product is in powder form so could be introduced in the extrusion process and also in internal mixer. Valid for any colour and antistatic or ESD formulations just adjusting the dosage. No blooming issues have been observed. Group: Specialty chemicals, polymers. Composition: Antistatic agent. Application: Rubber & Elastomers, Masterbatch & Compounders. Function: Antistatic additives. Physical Form: Dispersion. Product Code: PIM000007242. | Australia |
| AVANSTATIC 455FDA | AVANSTATIC 455FDA is very effective additives specially designed for coloured or clear rubber antistatic/ESD formulations, specially formulated for SBR, SBR/NBR, NR, rubber blends. AVANSTATIC 455FDA enable reaching lower resistance levels than other alternative products in the market with a minimum effect to rubber properties. Group: Specialty chemicals, polymers. Composition: Antistatic agent. Application: Rubber & Elastomers, Masterbatch & Compounders. Function: Antistatic additives. Physical Form: Dispersion. Product Code: PIM000007253. | Australia |
| AVANSTATIC NBR 535 | AVANSTATIC NBR 535 is presented in liquid form, specially formulated for application in polar rubber as NBR. AVANSTATIC solutions for rubber are very effective additives specially designed for coloured or clear rubber antistatic/ ESD formulations, specially formulated for each type of rubber blends. AVANSTATIC solutions for rubber enable reaching lower resistance levels than other alternative products in the market with a minimum effect to rubber properties. Group: Specialty chemicals, polymers. Composition: Antistatic agent. Application: Rubber & Elastomers. Function: Antistatic additives. Physical Form: Liquid. Product Code: PIM000007254. | Australia |
| AVANSTATIC PLAST RUB | AVANSTATIC PLAST RUB contain an optimized plasticizer, so that they are easier to apply, and improve the dispersion in mixtures of NBR/SBR. AVANSTATIC solutions for rubber are very effective additives specially designed for coloured or clear rubber antistatic/ ESD formulations, specially formulated for each type of rubber blends. AVANSTATIC solutions for rubber enable reaching lower resistance levels than other alternative products in the market with a minimum effect to rubber properties. Group: Specialty chemicals, polymers. Composition: Antistatic agent. Application: Rubber & Elastomers. Function: Antistatic additives. Physical Form: Dispersion. Product Code: PIM000007256. | Australia |
| AVANSTATIC SBR/EPDM | AVANSTATIC SBR/EPDM is presented in solid form, specially formulated for application in less polar rubber as SBR, EPDM, etc. It could be used in other types of rubber with less polarity as BR, CR, CSM, NR, with lower conductivity levels results. AVANSTATIC solutions for rubber are very effective additives specially designed for coloured or clear rubber antistatic/ ESD formulations, specially formulated for each type of rubber blends. AVANSTATIC solutions for rubber enable reaching lower resistance levels than other alternative products in the market with a minimum effect to rubber properties. Group: Specialty chemicals, polymers. Composition: Antistatic agent. Application: Rubber & Elastomers. Function: Antistatic additives. Physical Form: Solid. Product Code: PIM000007255. | Australia |
| AVANSTATIC TPU MB | AVANSTATIC TPU MB is a powerful permanent antistatic MB ready to use. Generate antistatic and ESD in TPU. Flexibility to get with one single product a range of conductivity between 107. to 109. ohms. It is. polyester based and for colourable and translucent products. Applications like shoes, soling, flooring, wheels, technical pieces, electronic parts, among others. Group: Specialty chemicals, polymers. Composition: Antistatic agent. Application: Rubber & Elastomers, Masterbatch & Compounders. Function: Antistatic additives. Physical Form: Dispersion. Product Code: PIM000007241. | Australia |
| BLANC FIXE F | BLANC FIXE F, manufactured by VENATOR, is a high-quality, synthetic barium sulfate used primarily in the paint and coatings industry. This product is known for its exceptional purity, fine particle size, and excellent dispersibility. It is made from a combination of barium and sulfate, resulting in a product that enhances brightness, color strength, and durability. BLANC FIXE F is also used in plastics, rubber, and ink applications, offering versatility and superior performance. Group: Specialty chemicals, paints & coatings, polymers. Composition: Barium Sulphate. Application: Architectural and Deco., Printing Inks, Thermosets & Composites, Can, Coil and Industrial, Adhesives & Sealants, Powder Coating, Masterbatch & Compounders. Function: PIGMENTS, Other. Physical Form: Micronized Powder. Product Code: PIM000032261. | Australia |
| BLANC FIXE MICRO | BLANC FIXE micro is a synthetic barium sulphate produced from high-purity solutions in a defined growth process. BLANC FIXE micro is organically coated. Key Application: Paints and Coatings (Powder coating & pigment pastes),Plastics and rubber (Thermoplastics, Elastomers & Thermosets) and Paper. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 7727-43-7. Composition: SYNTHETIC BARIUM SULFATE. Application: Thermoplastic Transformers, Thermosets & Composites, Powder Coating, Automotive Paints, Rubber & Elastomers. Function: PIGMENTS, Other. Physical Form: Nano powder. Product Code: PIM000032262. | Australia |
| BLOWN CASTOR OIL | Blown Castor Oil manufactured under thermally controlled conditions in the presence of air to give products with increased viscosities, specific gravities and reactivity's blown castor oil is a golden yellow to honey coloured viscous liquid. Blown Castor Oil is a derivative that has a higher viscosity and specific gravity compared to natural castor oil. Key Function: Binder, solvent. Key Application: Adhesives, Inks, Lubrication, Polish, Caulks and sealants, Leather dressing , Rubber compounding. Group: Specialty chemicals, electronic & specialties, paints & coatings, polymers. CAS No. 68187-84-8. Composition: Ricinus Communis. Application: Rubber & Elastomers, Printing Inks, Adhesives & Sealants, Lubricants. Function: BINDERS, Polyester. Physical Form: Liquid. Product Code: PIM000031963. | Australia |
| Brake & Gasket Gunwash Cleaner | BRAKE GASKET & GUNWASH CLEANER can be used on cleaning brakes, spray lines and spray guns. It can also be used to remove glue, brake dust, grease, rubber, resin, oil, paint, graffiti and burnout marks. Pack Sizes: 5 Litre, 20 Litres, 205 Litre Drums. Product ID: AC802. Chemicals By Industry, Automotive, Chemicals By Industry, Workshop. | Australia Wide |
| CARADOL SC48-08 | CARADOL SC48-08 is a low monol, low VOC polyether polyol for the production of flexible polyurethane slabstock foams. CARADOL SC48-08 is especially suited for the manufacture of foams used in applications where yellowing in contact with textiles or glass fogging has to be avoided. It has a wide processing tolerance over a normal density and hardness range. This includes diluting catalysts for HR foaming with this polyol or mixing this product with other slab polyols before it is used or brought into contact with HR system. Please see the specification sheet below and for further details contact our local sales representative today. Group: Specialty chemicals, polymers. CAS No. 51-79-6. Composition: Urethane. Application: Rubber & Elastomers, Polymer Producers. Function: POLYMERSOther. Physical Form: Liquid. Product Code: PIM000045463. | Australia |
| CHLORIDE RUTILE TITANIUM DIOXIDE CR718 | CHLORIDE. RUTILE. TITANIUM DIOXIDE CR718 is a zirconium, aluminum and organic surface treated multipurpose rutile titanium dioxide pigment manufactured by chloride process, CR718 pigment has outstanding dispersion performance, dispersing quickly and easily. It also has excellent opacity and gloss, and delivers a brilliant whiteness with blue undertone. CHLORIDE. RUTILE. TITANIUM DIOXIDE CR718. is recommended to use in coating, inks, leather, paints, plastic & rubber applications. Please see the specification sheet below and for further details contact our local sales representative today. Group: Specialty chemicals, paints & coatings. CAS No. Composition: Chloride Rutile Titanium Dioxide. Application: Automotive Paints, Powder Coating, Printing Inks, Rubber & Elastomers. Function: PIGMENTSTiO2 (Titanium Dioxide). Physical Form: Nano powder. Product Code: PIM000046800. | Australia |
| Chlorinated Rubber | Chlorinated Rubber. Corechem is affiliated with a global network of companies that service the major sectors of the Chemical Industry including Agriculture, Mining, Plastics, Water treatment, Surface Coatings and the Food Industry. |  Sydney, Melbourne, Adelaide, Townsville, Brisbane |
| Chlorinated Rubber | Chlorinated Rubber suppliers. MINIMUM QUANTITY 25 KGS. Australian suppliers of specialist chemical products. Categories: Surface Coatings. | CCC Ingredients: NSW, QLD, SA, WA, VIC, TAS |
| CHN-6800-U SILICONE RUBBER | General purpose silicone rubber (80 duro). Main Uses: Rubber manufacturing. Other Names: Silicone rubber. Cas No. 63394-02-5. Chemical Category: Rubber. PACK SIZES AVAILABLE: 20kg Box |  Australia Wide, offices in Sydney & Melbourne |
| Copper Sulphate Pentahydrate | COPPER SULPHATE PENTAHYDRATE is used for Agriculture (soil additive, pesticides, Bordeaux mixture), feed additive, germicides, textile mordant, leather industry. pigments, electric batteries, electroplated coatings, copper salts, reagent in analytical chemistry, medicine, wood preservative, preservation of pulp wood and ground pulp, process engraving and lithography, or flotation, petroleum industry, synthetic rubber, steel manufacture, treatment of natural asphalts. Use as per technical advice specific to industry only. Pack Sizes: 25KG. Product ID: SC251. Chemicals By Industry, Laboratory, Chemicals By Industry, Universal Products. | Australia Wide |
| CYASORB® UV-3529 | CYASORB® UV-3529 is a polymer additive, that appears in a off white pastille. CYASORB® UV-3529 offers the benfits for oligomeric HALS for long term UV and thermal protection of polymers, lower inter-reactivity with fillers, pigments and other additives (3° amine), low color contribution and highly resistant to discoloration and gas fading & very low in volatility and compatible with most polymers. CYASORB® UV-3529 is suitable to use in Polyolefins, Polyamides, Styrenics, Polyesters, PVC, Acrylics & Polyurethanes applications. Please see the specification sheet below and for further details contact our local sales representative today. Group: Specialty chemicals, polymers. Composition: Hindered Amine Light Stabilizer. Application: Rubber & Elastomers, Thermoplastic Transformers. Function: UV Absorbers, POLYMERS, Polyolefins. Physical Form: Solid. Product Code: PIM000042659. | Australia |
| DCC ORANGE 7036 | DCC ORANGE 7036 is a high performance blue shade orange pigment for use in high-end coatings applications where very good weatherfastness and heat stability are required. DCC Orange 7036 is a very cost effective lead free alternative to molybdate orange. Group: Specialty chemicals, polymers, paints & coatings. CAS No. 12236-62-3. Composition: Pigment Orange 36. Application: Automotive Paints, Can, Coil and Industrial, Architectural and Deco., Powder Coating, Masterbatch & Compounders, Rubber & Elastomers. Function: PIGMENTS, Organic Pigment. Physical Form: Solid. Product Code: PIM000008549. | Australia |
| Diamond No-Cut Resin Polish | DIAMOND NO-CUT POLISH is a great polish and sealant for all types of paintwork and colours. This product is best suited to new or moderately deteriorated paintwork, including metallic, clear coat and water-based finishes. The product contains carnauba wax for a hard and lasting shine. Wash and dry the paintwork using a quality car or truck wash to remove road grime and grit. In a shaded area out of direct sunlight, apply a 20-cent size (20mm) dab to cloth and apply to the paintwork in an overlapping circular pattern. Finish sections of panel work in straight lines to ensure even coverage. Increase the pressure over any marks, scratches or dull patches. Do not apply to unpainted rubber or plastic trim. Allow the residue to dry to a dull film and then buff by hand using a soft lint free cloth. Pack Sizes: 5 Litre. Product ID: SC401. Chemicals By Industry, Automotive. | Australia Wide |
| DIMACIT TMTD-PDR | DIMACIT TMTD-PDR offers fast vulcanization and gives an excellent vulcanization plateau with good heat aging and compression set resistance when used in sulfurless vulcanization systems and EV systems. Group: Specialty chemicals, electronic & specialties. Composition: Thiram. Application: Others. Function: POLYMERS, Silicone Rubber. Physical Form: Nano powder. Product Code: PIM000039778. | Australia |
| DLC-Si69 DRY SILANE | Powder coating (promotes the adhesion of coating to metal, glass, ceramic, enhance water-resistance), thermoplastic and polymer modification (lowers the viscosity and provides better process function, enhances the strength of finished goods), rubber and e Main Uses: Coupling agent. Other Names: Bis[3- (Triethoxysilyl) propyl] tetrasulfide. Cas No. 40372-72-3. Chemical Category: Organosilanes. PACK SIZES AVAILABLE: 25kg Pack | Australia Wide, offices in Sydney & Melbourne |
| DOWSIL 510 FLUID | DOWSIL 510 Fluid demonstrate exceptional high-temperature stability during continuous use at 232°C (450°F); these materials are also suitable for low-temperature applications requiring pour points as low as -57°C (-70°F). Group: Specialty chemicals, paints & coatings, polymers. Composition: Phenylmethyl Polysiloxane. Application: Thermoplastic Transformers, Polymer Producers, Can, Coil and Industrial, Can, Coil and Industrial, Automotive Paints, Adhesives & Sealants. Function: POLYMERS, Silicone Rubber, Other, ADDITIVES, BINDERS, Silicone Resins. Physical Form: Liquid. Product Code: PIM000027081. | Australia |
Our database is helping our users find suppliers everyday.
