Find where to buy products from Australian suppliers, including: distributors, industrial manufacturers, bulk supplies and wholesalers of raw ingredients & finished goods.
Search for products or services, then visit the suppliers website for prices, SDS or more information. You can also view suppliers in NZ, UK or the USA.
| Product | Description | |
|---|---|---|
| 3M GLASS BUBBLES K25 | 3M glass bubbles K25 ideal additives for shallow water buoyancy applications or processing applications where high strength is needed. In addition, like all 3M glass bubbles, K25 bubbles are compatible with thermoset resins like polyurethane and epoxy, and are virtually insoluble in water. Application: Paints and Coatings, Rubber and Plastic, Transportation. Group: Specialty chemicals, paints & coatings. Composition: Soda-lime-borosilicate glass. Application: Architectural and Deco., Adhesives & Sealants, Automotive Paints, Lamination and Converting, Powder Coating, Can, Coil and Industrial. Physical Form: Nano powder. Product Code: PIM000031758. |  Australia |
| CCC Ingredients | Premier supplier of specialist chemicals in Australia & New Zealand. We invite your enquiry no matter which application you may have in mind including: Agricultural, Automotive, Cleaning Products, Detergents, Food Ingredients & Processing, Fungicides, Herbicides, Laboratory Chemicals, Mining Industrial, Nutraceuticals, Personal Care, Petroleum and Oils, Pharmaceutical & Medical, Printing, Rubber, Surface Coatings, Textiles, Timber and Water Treatment Chemicals. Our Locations: Victoria, New South Wales, Queensland, Tasmania, South & Western Australia.featured listing |  CCC Ingredients: NSW, QLD, SA, WA, VIC, TAS |
| A-C® 1702 | A-C® 1702 is grease like, low temperature, completely amorphous, low density polyethylene (PE) homopolymer for use in solvent borne coatings, heat set, sheet fed solvent borne inks, and specialty digital and UV/EB inks to provide mar and rub resistance by lowering the coefficient of friction. Also used in lubricants to provide release. Will act as a plasticizer in paraffin based candles, especially large volume candles, to resist cracking. Group: Specialty chemicals, polymers. CAS No. 9002-88-4. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.1~2%. Certification: REACH. Product Code: PIM000007932. | Australia |
| A-C 316 | A-C 316 is a hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion resistance by lowering the coefficient of friction. In textiles, this can help improve sewability and fabric cutting, helping to extend cutting machine lifetime. Its acid number of 16 allows it to be emulsified into water. Can also provide heat resistance to hot melt adhesives (HMAs). In addition, may be used as a metal release agent for PVC processing and is a fusion control for PVC formulations. It will not affect clarity in transparent PVC applications. Very effective for use in processing PVC regrind. Group: Specialty chemicals, polymers. CAS No. 9002-88-4. Composition: OPE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.1~2%. Certification: REACH, Food Contact. Product Code: PIM000007937. | Australia |
| A-C 325 | A-C 325 is a hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion resistance by lowering the coefficient of friction. In textiles, this can help improve sewability and fabric cutting, extending cutting machine lifetime. Its acid number of 25 allows it to be emulsified into water. Can also provide heat resistance to hot melt adhesives (HMAs). Group: Specialty chemicals, polymers. CAS No. 68441-17-8. Composition: OPE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007915. | Australia |
| A-C 330 | A-C 330 is a hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion resistance by lowering the coefficient of friction. In textiles, can help improve sewability and fabric cutting, extending cutting machine lifetime. Its acid number is 30, which allows it to be emulsified into water. Can also provide heat resistance to hot melt adhesives (HMAs). Group: Specialty chemicals, polymers, paints & coatings. CAS No. 68441-17-8. Composition: OPE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Can, Coil and Industrial. Function: Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007921. | Australia |
| A-C® 3325 | A-C® 3325 is a hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion resistance by lowering the coefficient of friction. In textiles, this can help improve sewability and fabric cutting, extending cutting machine lifetime. Its acid number of 25 allows it to be emulsified into water. Can also provide heat resistance to hot melt adhesives (HMAs). Group: Specialty chemicals, polymers. CAS No. 68441-17-8. Composition: OPE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007925. | Australia |
| A-C® 3330 | A-C® 3330 is hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion resistance by lowering the coefficient of friction. In textiles, can help improve sewability and fabric cutting, extending cutting machine lifetime. Its acid number is 30, which allows it to be emulsified into water. Can also provide heat resistance to hot melt adhesives (HMAs). Group: Specialty chemicals, polymers. CAS No. 68441-17-8. Composition: OPE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007926. | Australia |
| A-C 392 | A-C 392 is hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion resistance by lowering the coefficient of friction. In textiles, can help improve sewability and fabric cutting, extending cutting machine lifetime. Its acid number of 30 allows it to be emulsified into water. Can also provide heat resistance to hot melt adhesives (HMAs). Additionally, it is an effective metal release agent for cellular PVC applications. Group: Specialty chemicals, polymers. CAS No. 68441-17-8. Composition: OPE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.3~0.5%. Certification: REACH. Product Code: PIM000007923. | Australia |
| A-C 405M | A-C 405M is an ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 8%, for use in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 24937-78-8. Composition: EVA WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Automotive Paints. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007909. | Australia |
| A-C 405T | A-C 405T is an ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 6%, for use in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 24937-78-8. Composition: EVA WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Automotive Paints. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007911. | Australia |
| A-C® 540 | A-C® 540 is an ethylene acrylic acid (EAA) copolymer in a prill form, with an acrylic acid (AA) content of 5%, for use in adhesives to promote adhesion to various substrates. It is also used in aqueous floor polishes to provide drag (raising the coefficient of friction) thereby controlling the final coefficient of friction. Its acid number of 40 aids emulsification. Also used in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. Group: Specialty chemicals, polymers. Composition: EVA WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007917. | Australia |
| A-C 540A | A-C 540A is an ethylene acrylic acid (EAA) copolymer in a powdered form, with an acrylic acid (AA) content of 5%, for use in adhesives to promote adhesion to various substrates. It is also used in aqueous floor polishes to provide drag (raising the coefficient of friction) thereby controlling the final coefficient of friction. Its acid number of 40 aids emulsification. Also used in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. Is a dispersing agent for color masterbatch in engineering resins. Excellent external lubricant for polyamide compounds. Group: Specialty chemicals, polymers. CAS No. 9010-77-9. Composition: PP-PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 2.0%. Certification: REACH. Product Code: PIM000007912. | Australia |
| AC-580 | A-C 580 ethylene acrylic acid (EAA) copolymer in a prill form, with an acrylic acid (AA) content of 10%, for use in adhesives to promote adhesion to various substrates. It is also used in aqueous floor polishes to provide drag (raising the coefficient of friction) thereby controlling the final coefficient of friction. Its acid number of 75 aids emulsification. Also used in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. Group: Specialty chemicals, polymers. CAS No. 9002-88-4. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.1~2%. Certification: REACH. Product Code: PIM000007931. | Australia |
| A-C 6 | A-C 6 is a low density polyethylene (LDPE) homopolymer in a prill form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. Can also be partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. Used in cable flooding compounds, along with polybutene. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 9002-88-4. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Adhesives & Sealants. Function: Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.1~2%. Certification: REACH. Product Code: PIM000007910. | Australia |
| A-C® 617 | A-C® 617 is a low density polyethylene (LDPE) homopolymer in a prill form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. Can also be partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. Is used as a dispersing agent in color masterbatch applications. In PVC applications it finds use as an external lubricant. Group: Specialty chemicals, polymers. Composition: EVA WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007918. | Australia |
| A-C 629 | A-C 629 is a low density Oxidized Polyethylene (LDOxPE) homopolymer in prill form for use in solvent borne coatings as a rheological aid. It also finds use as a metal release agent in PVC. It can also be atmospherically emulsified for use in aqueous applications, such as textiles, lubricants, coatings and inks, to lower the COF and provide surface properties such as mar & abrasion resistance and increased slip. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 68441-17-8. Composition: OPE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Others. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007914. | Australia |
| A-C® 629A | A-C® 629A is a Low density Oxidized Polyethylene (LDOxPE) homopolymer in prill form for use in solvent borne coatings as a rheological aid. It also finds use as a metal release agent in PVC. It is a pigment dispersing agent for color masterbatch. A-C® 629A can also be atmospherically emulsified for use in aqueous applications, such as textiles, lubricants, coatings and inks, to lower the COF and provide surface properties such as mar & abrasion resistance and increased slip. Group: Specialty chemicals, polymers. CAS No. 68441-17-8. Composition: Low Density Oxidized Polyethylene. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: Waxes, Dispersing Agents. Physical Form: Solid. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007905. | Australia |
| A-C 680 | A-C 680 is low density Oxidized Polyethylene (LDOxPE) homopolymer in prill form for use in solvent borne coatings as a rheological aid. It can also be atmospherically emulsified for use in aqueous applications, such as textiles, lubricants, coatings and inks, to lower the COF and provide surface properties such as mar &, abrasion resistance and increased slip. It can also be used as an anti transpirant coating to delay fruit spoilage allowing longer storage and transport times. It also finds use as a metal release agent in PVC. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 68441-17-8. Composition: OPE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Others. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 2.0%. Certification: REACH. Product Code: PIM000007927. | Australia |
| A-C® 6A | A-C® 6A is a homopolymer in a powdered form; for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. A-C® 6A can be also partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. Used in cable flooding compounds, along with polybutene. Is used as a dispersing agent in color masterbatch applications. Group: Specialty chemicals, polymers, paints & coatings. CAS No. 9002-88-4. Composition: Low Density Polyethylene. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Powder Coating, Printing Inks. Function: Waxes, Dispersing Agents, POLYMERS, Polystyrene (PS). Physical Form: Micronized Powder. Recommended Dosage: 0.1~2%. Certification: REACH, Food Contact, PICCS. Product Code: PIM000007906. | Australia |
| A-C 8 | A-C 8 is low density polyethylene (LDPE) homopolymer in a prill form, for use in solvent borne coatings, heatset and liquid solvent borne inks,to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. Can also be partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. Group: Specialty chemicals, polymers. CAS No. 9002-88-4. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.5%. Certification: REACH. Product Code: PIM000007922. | Australia |
| A-C® 9A | A-C® 9A is low density polyethylene (LDPE) homopolymer in a powdered form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. Can also be partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. Best choice in cable filling compounds to prevent oil bleed at high temperatures. Is used as a dispersing agent in color masterbatch applications. Group: Specialty chemicals, polymers. CAS No. 9002-88-4. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.1~2%. Certification: REACH. Product Code: PIM000007929. | Australia |
| ACUMIST A-12 | ACUMIST A12 is Micronized Oxidized Polyethylene Homopolymer for use in water based coatings, flexographic and gravure inks and overprint varnishes. It also can be used as a processing aid, matting and antissetling agent in paints. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 68441-17-8. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Adhesives & Sealants. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.5~1%. Certification: REACH. Product Code: PIM000007936. | Australia |
| ACUMIST C-5 | ACUMIST C-5 is medium particle size micronized Polyethylene Homopolymer for use in solvent borne coatings and solvent based flexographic inks. As with all ACumist products, it is insoluble in solvents and UV based monomers and oligomers at room temperature. best suited goroffset inks, can coatings , and all thin film solvent based coatings. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 68441-17-8. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Adhesives & Sealants. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.5~1%. Certification: REACH. Product Code: PIM000007930. | Australia |
| ACUMIST D-6 | ACUMIST D-6 is micronized Polyethylene Homopolymer for use and general purpose solvent borne coatings, stains and lacquers, and gravure inks. It provides a good balance of properties where economics are of paramount concern. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 68441-17-8. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Adhesives & Sealants. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.5~1%. Certification: REACH. Product Code: PIM000007933. | Australia |
| ACUMIST D-9 | D-9 Micronized Polyethylene Homopolymer for use general purpose solvent borne coatings, stains and lacquers, and gravure inks. It provides a good balance of properties where economics are of paramount concernMostlu used in Gravure inks for slip and rubs. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 68441-17-8. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Adhesives & Sealants. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.5~1%. Certification: REACH. Product Code: PIM000007934. | Australia |
| ACUMIST P-10 | ACUMIST P10 is micronized polypropylene for matting and non-skid or non-slip applications for industrial solvent coatings. Excellent abrasion resistance. Used in Powder Coating for matting and scratch resistance. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 68441-17-8. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Adhesives & Sealants. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.5~1%. Certification: REACH. Product Code: PIM000007935. | Australia |
| A-C X 1946 | Ethene, homopolymer, used in painting and powder painting, good transparancy, flatting agent, good abrasion performance and hand feeling, improving demould. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 9002-88-4. Composition: Ethene, homopolymer. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Automotive Paints. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007938. | Australia |
| AOX52 | AOX52 is a highly concentrated, free flowing powder with strong antimicrobial activities. It can be added to different kinds of paints and lacquers (water based, solvent based, solvent free) as well as to thermoplastic materials (PP, PE, TPU, PU, ABS, PA etc.). Group: Specialty chemicals, polymers, paints & coatings. Composition: Powder with strong antimicrobial activities. Application: Can, Coil and Industrial, Masterbatch & Compounders, Medical Application, Powder Coating, Rubber & Elastomers. Function: ADDITIVESBiocides. Physical Form: Micronized Powder. Product Code: PIM000009014. | Australia |
| BLANC FIXE F | BLANC FIXE F, manufactured by VENATOR, is a high-quality, synthetic barium sulfate used primarily in the paint and coatings industry. This product is known for its exceptional purity, fine particle size, and excellent dispersibility. It is made from a combination of barium and sulfate, resulting in a product that enhances brightness, color strength, and durability. BLANC FIXE F is also used in plastics, rubber, and ink applications, offering versatility and superior performance. Group: Specialty chemicals, paints & coatings, polymers. Composition: Barium Sulphate. Application: Architectural and Deco., Printing Inks, Thermosets & Composites, Can, Coil and Industrial, Adhesives & Sealants, Powder Coating, Masterbatch & Compounders. Function: PIGMENTS, Other. Physical Form: Micronized Powder. Product Code: PIM000032261. | Australia |
| BLANC FIXE MICRO | BLANC FIXE micro is a synthetic barium sulphate produced from high-purity solutions in a defined growth process. BLANC FIXE micro is organically coated. Key Application: Paints and Coatings (Powder coating & pigment pastes),Plastics and rubber (Thermoplastics, Elastomers & Thermosets) and Paper. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 7727-43-7. Composition: SYNTHETIC BARIUM SULFATE. Application: Thermoplastic Transformers, Thermosets & Composites, Powder Coating, Automotive Paints, Rubber & Elastomers. Function: PIGMENTS, Other. Physical Form: Nano powder. Product Code: PIM000032262. | Australia |
| BLOWN CASTOR OIL | Blown Castor Oil manufactured under thermally controlled conditions in the presence of air to give products with increased viscosities, specific gravities and reactivity's blown castor oil is a golden yellow to honey coloured viscous liquid. Blown Castor Oil is a derivative that has a higher viscosity and specific gravity compared to natural castor oil. Key Function: Binder, solvent. Key Application: Adhesives, Inks, Lubrication, Polish, Caulks and sealants, Leather dressing , Rubber compounding. Group: Specialty chemicals, electronic & specialties, paints & coatings, polymers. CAS No. 68187-84-8. Composition: Ricinus Communis. Application: Rubber & Elastomers, Printing Inks, Adhesives & Sealants, Lubricants. Function: BINDERS, Polyester. Physical Form: Liquid. Product Code: PIM000031963. | Australia |
| CHLORIDE RUTILE TITANIUM DIOXIDE CR718 | CHLORIDE. RUTILE. TITANIUM DIOXIDE CR718 is a zirconium, aluminum and organic surface treated multipurpose rutile titanium dioxide pigment manufactured by chloride process, CR718 pigment has outstanding dispersion performance, dispersing quickly and easily. It also has excellent opacity and gloss, and delivers a brilliant whiteness with blue undertone. CHLORIDE. RUTILE. TITANIUM DIOXIDE CR718. is recommended to use in coating, inks, leather, paints, plastic & rubber applications. Please see the specification sheet below and for further details contact our local sales representative today. Group: Specialty chemicals, paints & coatings. CAS No. Composition: Chloride Rutile Titanium Dioxide. Application: Automotive Paints, Powder Coating, Printing Inks, Rubber & Elastomers. Function: PIGMENTSTiO2 (Titanium Dioxide). Physical Form: Nano powder. Product Code: PIM000046800. | Australia |
| Chlorinated Rubber | Chlorinated Rubber. Corechem is affiliated with a global network of companies that service the major sectors of the Chemical Industry including Agriculture, Mining, Plastics, Water treatment, Surface Coatings and the Food Industry. |  Sydney, Melbourne, Adelaide, Townsville, Brisbane |
| Chlorinated Rubber | Chlorinated Rubber suppliers. MINIMUM QUANTITY 25 KGS. Australian suppliers of specialist chemical products. Categories: Surface Coatings. | CCC Ingredients: NSW, QLD, SA, WA, VIC, TAS |
| Copper Sulphate Pentahydrate | COPPER SULPHATE PENTAHYDRATE is used for Agriculture (soil additive, pesticides, Bordeaux mixture), feed additive, germicides, textile mordant, leather industry. pigments, electric batteries, electroplated coatings, copper salts, reagent in analytical chemistry, medicine, wood preservative, preservation of pulp wood and ground pulp, process engraving and lithography, or flotation, petroleum industry, synthetic rubber, steel manufacture, treatment of natural asphalts. Use as per technical advice specific to industry only. Pack Sizes: 25KG. Product ID: SC251. Chemicals By Industry, Laboratory, Chemicals By Industry, Universal Products. |  Australia Wide |
| DCC ORANGE 7036 | DCC ORANGE 7036 is a high performance blue shade orange pigment for use in high-end coatings applications where very good weatherfastness and heat stability are required. DCC Orange 7036 is a very cost effective lead free alternative to molybdate orange. Group: Specialty chemicals, polymers, paints & coatings. CAS No. 12236-62-3. Composition: Pigment Orange 36. Application: Automotive Paints, Can, Coil and Industrial, Architectural and Deco., Powder Coating, Masterbatch & Compounders, Rubber & Elastomers. Function: PIGMENTS, Organic Pigment. Physical Form: Solid. Product Code: PIM000008549. | Australia |
| DLC-Si69 DRY SILANE | Powder coating (promotes the adhesion of coating to metal, glass, ceramic, enhance water-resistance), thermoplastic and polymer modification (lowers the viscosity and provides better process function, enhances the strength of finished goods), rubber and e Main Uses: Coupling agent. Other Names: Bis[3- (Triethoxysilyl) propyl] tetrasulfide. Cas No. 40372-72-3. Chemical Category: Organosilanes. PACK SIZES AVAILABLE: 25kg Pack |  Australia Wide, offices in Sydney & Melbourne |
| DOWSIL 20 RELEASE COATING | DOWSIL 20 RELEASE COATING is a silicone release emulsion designed to simplify the production of molded plastic parts. Use DOWSIL 20 RELEASE COATING as a parting agent for epoxies, melamine, methacrylate, phenolics, polyesters, and polyurethanes. Its also ideal for releasing silicone glass laminates and tubes and parts made from silicone moulding compounds, as well as wood forming operations, metal making, and rubber extrusion. DOWSIL 20 RELEASE COATING is easy to use and does not discolor moulded parts. In most cases, a single application provides release through numerous moulding cycles. DOWSIL 20 RELEASE COATING provides heat stable, non-carbonizing, non-oily parting film with minimum build-up on moulds and dies. Group: Personal care ingredients, homecare & institutional cleaning. CAS No. 8052-41-3, 1330-20-7, 100-41-4, 25551-13-7, 25550-14-5, 107-46-0, 111-84-2. Composition: Synthetic. Application: Institutional Cleaner, Floor & Surface Cleaner. Physical Form: Liquid. Product Code: PIM000043081. | Australia |
| DOWSIL 510 FLUID | DOWSIL 510 Fluid demonstrate exceptional high-temperature stability during continuous use at 232°C (450°F); these materials are also suitable for low-temperature applications requiring pour points as low as -57°C (-70°F). Group: Specialty chemicals, paints & coatings, polymers. Composition: Phenylmethyl Polysiloxane. Application: Thermoplastic Transformers, Polymer Producers, Can, Coil and Industrial, Can, Coil and Industrial, Automotive Paints, Adhesives & Sealants. Function: POLYMERS, Silicone Rubber, Other, ADDITIVES, BINDERS, Silicone Resins. Physical Form: Liquid. Product Code: PIM000027081. | Australia |
| DYMEREX RESIN | DYMEREX RESIN is a pale, acidic, thermoplastic, high softening point resin. It is composed predominately of dimeric acids derived from rosin with lesser amounts of monomeric resin acids and neutral materials of rosin origin. Dymerex modified resin has high resistance to oxidation and does not crystallize from solutions or from solid compositions. It is compatible with many natural and synthetic film formers and rubbers. Being an acidic resin, it reacts readily with polyalcohols or hydrated lime to yield high melting derivatives. DYMEREX RESIN offers a alcohol-soluble, noncrystallin, resistant to oxidation, thermoplastic rosin acid and providing a very high softening point. DYMEREX RESIN is recommended to use in assembly, bookbinding, cable filling and flooding, caulks and sealants, contact adhesives, footwear and leather, hot melt adhesives, laminating, pressure sensitive, solventborne adhesives, tapes and labels, wax modification applications. Please see the brochure below and for further details contact our local sales representative today. Group: Specialty chemicals, electronic & specialties, paints & coatings, polymers. Application: Adhesives & Sealants, Others. Function: BINDERS, Other. Physical Form: Liquid. Product Code: PIM000046541. | Australia |
| EASTMAN CP 343-1 50% IN XYLENE | EASTMAN CP 343-1 50% IN XYLENE has good resistance to high temperatures. It can withstand 110° C for 20 minutes and a thermogravimetric analysis suggests it will withstand appreciable higher temperatures. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 1330-20-7, 100-41-4, 108-90-7. Composition: Xylene, Eethylbenzene, Chlorobenzene. Application: Thermosets & Composites, Lamination and Converting, Can, Coil and Industrial, Can, Coil and Industrial, Rubber & Elastomers. Function: ADDITIVES, Adhesion Promoters. Physical Form: Liquid. Product Code: PIM000037715. | Australia |
| EASTMAN HYDROQUINONE PHOTO. GRADE | EASTMAN HYDROQUINONE PHOTO. GRADE is used as a good general-purpose inhibitor, stabilizer, antioxidant, and intermediate. EASTMAN HYDROQUINONE PHOTO. GRADE can be used for the applications in agriculture intermediates, Case and carton closures, Dyes/pigments/paints, Flame retardants, Graphic arts, Herbicides - intermediate for other, Intermediates, Kitchen & bath, Methyl methyl acrylate (MMA), Molding & trim interior, Paints & coatings, Peek (polyether ether ketone) Photographic chemicals, Photographic supplies, Polymer modification, Polymer processing, Process solvents, Resins, Rubber modification, Specialty chemicals, Water treatment industrial. Group: Specialty chemicals, electronic & specialties, paints & coatings, polymers. Composition: Hydroquinone. Application: Rubber & Elastomers, Powder Coating, Architectural and Deco., Automotive Paints, Others, Fibers, Textiles & Films, Fibers, Textiles & Films. Physical Form: Solid. Product Code: PIM000035965. | Australia |
| Epoxy & Two Pack Stripper | EPOXY & TWO PACK STRIPPER - AC805 is a viscous mobile solvent gel formulated to remove carbon, rubber, resin, paint and varnish from bricks, stone and metal surfaces, including ferrous metals and alloys. This product has a limited shelf life on the gelling component. Apply a liberal amount of AC805 directly onto the surface with a paint brush. Allow 10-15 minutes contact time for the product to penetrate and soften the coating. Finally, clean the surface by scraping or hosing off with water. Dry the surface and apply as before. Pack Sizes: 5 Litre, 20 Litres. Product ID: AC805. Chemicals By Industry, Brick & Concrete Cleaning, Chemicals By Industry, Building & Construction, Chemicals By Industry, Marine. | Australia Wide |
| GLASS BUBBLES S38HS | Glass Bubbles S38HS are hollow glass spheres with a typical density of 0.38 g/cc and an isostatic crush strength of 5,500 psi. These glass bubbles are designed for buoyancy and insulation in ultra-deep water applications in oil and gas drilling. The bubbles produce strong, stable voids and low thermal conductivity, helping coatings achieve the necessary compressive strength. These Glass Bubbles are designed for pipeline insulation in ultra-deep water applications and low density sheet moulding compounds (SMC).Applicaiton: Compounding, Insulation and Buoyancy, Paints and Coatings, Rubber and Plastic, Transportation. Group: Specialty chemicals, paints & coatings. Composition: Soda-lime-borosilicate glass. Application: Architectural and Deco., Adhesives & Sealants, Automotive Paints, Lamination and Converting, Powder Coating, Can, Coil and Industrial. Physical Form: Nano powder. Product Code: PIM000031761. | Australia |
| Graffiti Remover & Paint Stripper | GRAFFITI REMOVER & PAINT STRIPPER - AC800 is a viscous mobile solvent gel formulated to remove carbon, rubber, resin, paint and varnish from bricks, stone and metal surfaces, including ferrous metals and alloys. Apply a liberal amount of AC800 directly onto the surface with a paint brush. Allow 10-15 minutes contact time for the product to penetrate and soften the coating. Finally, clean the surface by scraping or hosing off with water. Some stubborn coatings and residue films may require a second application of AC800. Dry the surface and apply as before. Pack Sizes: 5 Litre, 20 Litres, 205 Litre Drums. Product ID: AC800. Chemicals By Industry, Brick & Concrete Cleaning, Chemicals By Industry, Building & Construction. | Australia Wide |
| HJSIL ® 200 | HJSIL® 200 is a kind of hydrophilic fumed silica with a specific surface area of 200 m2/g. Its high purity white colloidal powder. Application: HTV and RTV silicone rubber, Adhesives and sealants, Paints, coatings and pigments, Printing inks, Cable compounds, Unsaturated polyester resins, laminated resins and Gel coats. Group: Specialty chemicals, paints & coatings, polymers. Composition: hydrophilic fumed silica. Application: Rubber & Elastomers, Printing Inks, Can, Coil and Industrial, Can, Coil and Industrial, Automotive Paints, Adhesives & Sealants. Function: ADDITIVES, Adhesion Promoters. Physical Form: Nano powder. Product Code: PIM000031790. | Australia |
| HJSIL® R272 | HJSIL® R272 is a hydrophobic fumed silica, appears in a high purity white colloidal powder. HJSIL® R272 function as thickner, anti-settling agent, anti-caking agent and anti-sagging agent. HJSIL® R272 is suitable to use in adhesives and sealants, coatings and paints, printing inks and toner, cable compounds and gels & silicone rubber and silicone sealants applications. Group: Specialty chemicals, paints & coatings. CAS No. 112945-52-5. Composition: Hydrophobic fumed silica. Application: Printing Inks, Powder Coating, Adhesives & Sealants. Function: ADDITIVES, Other. Physical Form: Nano powder. Product Code: PIM000041171. | Australia |
| HORDARESIN NP-70 | A solid, 70% chlorinated alkane which is used in a variety of applications including paints, coatings, rubber, adhesives, polyolefins, textiles & fabrics. Used primarily as a flame retardant and shows excellent synergies with antimony trioxide. Additional Main Uses: Fire retardant. Other Names: Solid chlorinated alkane. Cas No. Proprietary. Product Category: Fire Retardants. PACK SIZES AVAILABLE: 25kg Bags | Australia Wide, offices in Sydney & Melbourne |
| KRONOS 2220 | KRONOS 2220 is a treated rutile for for plastics which require high outdoor durability and very good optical properties. Group: Specialty chemicals, polymers, paints & coatings. CAS No. 13463-67-7. Composition: TiO2 Rutile CP. Application: Architectural and Deco., Can, Coil and Industrial, Masterbatch & Compounders, Rubber & Elastomers. Function: TiO2. Physical Form: Micronized Powder. Product Code: PIM000002080. | Australia |
| PETROLEUM JELLY | PETROLEUM JELLY BP WHITE is a high purity white Petrolatum formulated from mixtures of oily and waxy long-chain, non-polar hydrocarbons obtained from petroleum, and wholly or nearly decolorized. PETROLEUM JELLY BP WHITE has the application of printing ink, leather& rubber industry. Group: Specialty chemicals, paints & coatings, polymers. Composition: WHITE SOFT PARAFFIN. Application: Printing Inks, Rubber & Elastomers. Physical Form: Liquid. Product Code: PIM000031750. | Australia |
| POWEROIL® PEARL H 350 | H350 is high purity USP grade white mineral oil formulated from highly refined. hydrotreated base oils meeting the extreme purity requirements of the United State Pharmacopoeia which ensures the. absence of any significant sulfur, nitrogen, oxygen and halogen derivatives, unsaturated substances and aromatics. Applications include -. s medical formulations, ointments , laxatives , repository vaccines , hair oils . hair creams , cosmetics , facial creams and lotions , gelatin capsules, protective coatings for fruits and vegetables, veterinary. preparations , egg preservatives etc. Group: Specialty chemicals, electronic & specialties, paints & coatings, polymers, agrochemicals. CAS No. 64742-52-5. Composition: White mineral oil. Application: Construction, Lubricants, Petrochemicals, Rubber & Elastomers, Agrochemical Formulations, Agrochemical Ingredients. Function: ADDITIVESIntermediates & Accelerators. Physical Form: Liquid. Product Code: PIM000086309. | Australia |
| POWEROIL® SAPPHIRE H38 | POWEROIL® SAPPHIRE H38 is a medium viscosity rubber processing oil characterized by its low PCA content, meeting the strict European Regulation (EU directive 2005/69/EC) for non-toxic and non-carcinogenic oils (< 3% PCA content as per IP: 346 Standard). Additionally, it is PAH-free and suitable for NR, SBR, PBR, EPDM, and Reclaim Rubber processing. Its versatility makes it ideal for various applications including tire manufacturing, retreads, reclaim rubber production, extrusion profiles, and molded/extruded products. Group: Specialty chemicals, paints & coatings, polymers. Composition: Oil. Application: Rubber & Elastomers. Function: ADDITIVES, Other, Silicone Rubber. Physical Form: Liquid. Product Code: PIM000068519. | Australia |
| PVA BP-24 | PVA BP-24 is a water soluble and biodegradable synthetic polymer. It is a dry solid, and is available in granule and powdered forms, grades include both fully hydrolyzed and partially hydrolyzed. PVA BP-24 offers a good affinity and cohesion power to hydrophobic fiber, Good compatibility with oiling agent, Good solution viscosity stability & Better protective colloid property than BF type PVA. PVA BP-24 is suitable to use in lamination, polymers, adhesives, metal and other applications. For further details, please see the specification sheet below and contact our local sales representative today. Group: Specialty chemicals, electronic & specialties, paints & coatings, polymers. CAS No. 25213-24-9. Composition: Acetic Acid Ethenyl Ester, Polymer with Ethenol. Application: Lamination and Converting, Rubber & Elastomers, Adhesives & Sealants, Mining, Others. Function: POLYMERS, Other. Physical Form: Micronized Powder. Product Code: PIM000043244. | Australia |
| RAVEN R425 POWDER | RAVEN R425 POWDER is a carbon black product widely employed as an additive in plastic and rubber applications, serving as both a pigment and a chemical reagent. Its versatility extends to use in batteries and refractories as well. Group: Specialty chemicals, paints & coatings. CAS No. 1333-86-4. Composition: Carbon. Application: Architectural and Deco. Function: PIGMENTSCarbon Black. Physical Form: Micronized Powder. Product Code: PIM000071244. | Australia |
| Rust Evaporator | RUST EVAPORATOR is a NON HAZARDOUS rust removing and preventing concentrate used for descaling and oxide & rust removal from most ferrous and steel items. For use in a soak bath situation. Use with confidence as a non hazardous and effective treatment to descale boilers, heat exchanges and to clean and rusty but valuable items such as car parts, tools and equipment. The non dangerous liquid is not normally subject to any special disposal considerations and is generally safe on surfaces include aluminum, iron, steel, brass, copper, plastic, rubber, chrome, or oxide free paint. Use this product via Soak Method to remove rust from items. Simply prepare a solution of the product with water and immerse or fill item with liquid until the item is free of rust and debris. Once the item is clean allow it to air dry to form a protective coating that greatly reduces oxidization. This product is generally safe for use on most parts and equipment that are not harmed by water alone. Generally safe surfaces include aluminum, iron, steel, brass, copper, plastic, rubber, chrome, or oxide free paint. Soak Bath Solutions - 1 part product to 7 parts water. Radiator & Exchange Flush 1 part to 7 parts water. Tips. Tip: 1 - This product can be reused; when the soak bath solutions activity reduces simply add more concentrate. Tip: 2 - Warm water produces faster results than cold water; very cold will stop the product from working entirely. Pack Sizes: 5 Litre, 20 Litres, 205 Litre Drums, 1000 Litres. Product ID: WC1003. Chemicals By Industry, Workshop. | Australia Wide |
| SACHTOLITH® HD-S | SACHTOLITH® HD-S is a high-quality, synthetic white pigment primarily used in the paint and coatings industry. Composed of pure zinc sulfide, it offers exceptional durability, brightness, and opacity. This versatile pigment is also used in plastics, paper, and rubber products, enhancing their aesthetic appeal and functionality. SACHTOLITH® HD-S is renowned for its excellent weather resistance and lightfastness, making it a preferred choice for outdoor applications. Group: Specialty chemicals, paints & coatings, polymers. Composition: Synthetic Zinc Sulphide. Application: Adhesives & Sealants, Architectural and Deco., Can, Coil and Industrial, Masterbatch & Compounders, Printing Inks, Powder Coating, Thermosets & Composites. Function: PIGMENTSOther. Physical Form: Micronized Powder. Product Code: PIM000032264. | Australia |
| Silaplane FM-0411P | Silaplane FM-04 series, including Silaplane FM-0411P with a Molecular Weight (Mn) of 1000, can react with urethane resins and polyesters to impart the excellent properties of silicone to various organic resins. As a result, Silaplane can be used as a raw material for polymers, filler dispersants, and surface treatment agents. Group: Specialty chemicals, electronic & specialties, paints & coatings, polymers. CAS No. 207308-30-3, 191920-47-5. Composition: Reactive silicone. Application: Adhesives & Sealants, Architectural and Deco., Automotive Paints, Construction, Electronic Chemicals, Fibers, Textiles & Films, Lamination and Converting, Masterbatch & Compounders, Polymer Producers, Powder Coating, Printing Inks, Rubber & Elastomers, Thermosets & Composites, Thermoplastic Transformers. Function: Adhesion Promoters, Anti-Graffiti, Antiscratch, Coupling Agents / Chain extenders, Dispersing Agents, Intermediates & Accelerators, Optical Materials, Other, Reagents, Rheology Modifiers, Semiconductor Materials, Surface Modifiers - Defoamers, Water Repellents, Acrylic Dispersions, Acrylic Emulsions, Acrylic Resins, Amino - Melamine - Urea Resins, Epoxy Resins, Phenolic Resins, Polyamide, Polyisocyanates, Polyurethane / Polyaspartics, Polyurethane Dispersions, Redispersable Powder, SBR Emulsions, Silane Terminated Polyethers, Silicone Resins, Styrene-Acrylic Dispersions, UV Binders and Oligomers, Vinyl Resins, Complex Inorganic Pigments, Functional Dyes, Iron Oxide, TiO2 (Titanium Dioxide), POLYMERS, Polymer Producers/Rheology modifier, SBR, Silicone Rubber, TPU, Raw Material for Electronics. Physical Form: Liquid. Recommended Dosage: 0.1-10% (Often in the range of 0.5-3%.). Certification: NDSL, ENCS. Product Code: PIM000088302. | Australia |
| Silaplane FM-0421 | Silaplane FM-04 series, including Silaplane FM-0421 with a Molecular Weight (Mn) of 5000, can react with urethane resins and polyesters to impart the excellent properties of silicone to various organic resins. As a result, Silaplane can be used as a raw material for polymers, filler dispersants, and surface treatment agents. Group: Specialty chemicals, electronic & specialties, paints & coatings, polymers. CAS No. 207308-30-3, 191920-47-5. Composition: Reactive silicone. Application: Adhesives & Sealants, Architectural and Deco., Automotive Paints, Construction, Electronic Chemicals, Fibers, Textiles & Films, Lamination and Converting, Masterbatch & Compounders, Polymer Producers, Powder Coating, Printing Inks, Rubber & Elastomers, Thermosets & Composites, Thermoplastic Transformers. Function: Adhesion Promoters, Anti-Graffiti, Antiscratch, Coupling Agents / Chain extenders, Dispersing Agents, Intermediates & Accelerators, Optical Materials, Other, Reagents, Rheology Modifiers, Semiconductor Materials, Surface Modifiers - Defoamers, Water Repellents, Acrylic Dispersions, Acrylic Emulsions, Acrylic Resins, Amino - Melamine - Urea Resins, Epoxy Resins, Phenolic Resins, Polyamide, Polyisocyanates, Polyurethane / Polyaspartics, Polyurethane Dispersions, Redispersable Powder, SBR Emulsions, Silane Terminated Polyethers, Silicone Resins, Styrene-Acrylic Dispersions, UV Binders and Oligomers, Vinyl Resins, Complex Inorganic Pigments, Functional Dyes, Iron Oxide, TiO3 (Titanium Dioxide), POLYMERS, Polymer Producers/Rheology modifier, SBR, Silicone Rubber, TPU, Raw Material for Electronics. Physical Form: Liquid. Recommended Dosage: 0.1-10% (Often in the range of 0.5-3%.). Certification: NDSL, ENCS. Product Code: PIM000088303. | Australia |
| Silaplane FM-0425 | Silaplane FM-04 series, including Silaplane FM-0425 with a Molecular Weight (Mn) of 10000, can react with urethane resins and polyesters to impart the excellent properties of silicone to various organic resins. As a result, Silaplane can be used as a raw material for polymers, filler dispersants, and surface treatment agents. Group: Specialty chemicals, electronic & specialties, paints & coatings, polymers. CAS No. 207308-30-3, 191920-47-5. Composition: Reactive silicone. Application: Adhesives & Sealants, Architectural and Deco., Automotive Paints, Construction, Electronic Chemicals, Fibers, Textiles & Films, Lamination and Converting, Masterbatch & Compounders, Polymer Producers, Powder Coating, Printing Inks, Rubber & Elastomers, Thermosets & Composites, Thermoplastic Transformers. Function: Adhesion Promoters, Anti-Graffiti, Antiscratch, Coupling Agents / Chain extenders, Dispersing Agents, Intermediates & Accelerators, Optical Materials, Other, Reagents, Rheology Modifiers, Semiconductor Materials, Surface Modifiers - Defoamers, Water Repellents, Acrylic Dispersions, Acrylic Emulsions, Acrylic Resins, Amino - Melamine - Urea Resins, Epoxy Resins, Phenolic Resins, Polyamide, Polyisocyanates, Polyurethane / Polyaspartics, Polyurethane Dispersions, Redispersable Powder, SBR Emulsions, Silane Terminated Polyethers, Silicone Resins, Styrene-Acrylic Dispersions, UV Binders and Oligomers, Vinyl Resins, Complex Inorganic Pigments, Functional Dyes, Iron Oxide, TiO4 (Titanium Dioxide), POLYMERS, Polymer Producers/Rheology modifier, SBR, Silicone Rubber, TPU, Raw Material for Electronics. Physical Form: Liquid. Recommended Dosage: 0.1-10% (Often in the range of 0.5-3%.). Certification: NDSL, ENCS. Product Code: PIM000088304. | Australia |
| Silaplane FM-0711 | Silaplane FM-07 series, including Silaplane FM-0711 with a Molecular Weight (Mn) of 1000, can react with Acrylic resins to impart the excellent properties of silicone to various organic resins. As a result, Silaplane can be used as a raw material for polymers. Group: Specialty chemicals, polymers, electronic & specialties, paints & coatings. CAS No. 146632-07-7. Composition: Reactive silicone. Application: Adhesives & Sealants, Architectural and Deco., Automotive Paints, Construction, Electronic Chemicals, Fibers, Textiles & Films, Lamination and Converting, Masterbatch & Compounders, Polymer Producers, Powder Coating, Printing Inks, Rubber & Elastomers, Thermosets & Composites, Thermoplastic Transformers. Function: Adhesion Promoters, Anti-Graffiti, Antiscratch, Coupling Agents / Chain extenders, Dispersing Agents, Intermediates & Accelerators, Optical Materials, Other, Reagents, Rheology Modifiers, Semiconductor Materials, Surface Modifiers - Defoamers, Water Repellents, Acrylic Dispersions, Acrylic Emulsions, Acrylic Resins, Amino - Melamine - Urea Resins, Epoxy Resins, Phenolic Resins, Polyamide, Polyisocyanates, Polyurethane / Polyaspartics, Polyurethane Dispersions, Redispersable Powder, SBR Emulsions, Silane Terminated Polyethers, Silicone Resins, Styrene-Acrylic Dispersions, UV Binders and Oligomers, Vinyl Resins, Complex Inorganic Pigments, Functional Dyes, Iron Oxide, TiO5 (Titanium Dioxide), POLYMERS, Polymer Producers/Rheology modifier, SBR, Silicone Rubber, TPU, Raw Material for Electronics. Physical Form: Liquid. Recommended Dosage: 0.1-10% (Often in the range of 0.5-3%.). Certification: ENCS. Product Code: PIM000056806. | Australia |
| Silaplane FM-0721 | Silaplane FM-07 series, including Silaplane FM-0721 with a Molecular Weight (Mn) of 5000, can react with Acrylic resins to impart the excellent properties of silicone to various organic resins. As a result, Silaplane can be used as a raw material for polymers. Group: Specialty chemicals, polymers, electronic & specialties, paints & coatings. CAS No. 146632-07-7. Composition: Reactive silicone. Application: Adhesives & Sealants, Architectural and Deco., Automotive Paints, Construction, Electronic Chemicals, Fibers, Textiles & Films, Lamination and Converting, Masterbatch & Compounders, Polymer Producers, Powder Coating, Printing Inks, Rubber & Elastomers, Thermosets & Composites, Thermoplastic Transformers. Function: Adhesion Promoters, Anti-Graffiti, Antiscratch, Coupling Agents / Chain extenders, Dispersing Agents, Intermediates & Accelerators, Optical Materials, Other, Reagents, Rheology Modifiers, Semiconductor Materials, Surface Modifiers - Defoamers, Water Repellents, Acrylic Dispersions, Acrylic Emulsions, Acrylic Resins, Amino - Melamine - Urea Resins, Epoxy Resins, Phenolic Resins, Polyamide, Polyisocyanates, Polyurethane / Polyaspartics, Polyurethane Dispersions, Redispersable Powder, SBR Emulsions, Silane Terminated Polyethers, Silicone Resins, Styrene-Acrylic Dispersions, UV Binders and Oligomers, Vinyl Resins, Complex Inorganic Pigments, Functional Dyes, Iron Oxide, TiO6 (Titanium Dioxide), POLYMERS, Polymer Producers/Rheology modifier, SBR, Silicone Rubber, TPU, Raw Material for Electronics. Physical Form: Liquid. Recommended Dosage: 0.1-10% (Often in the range of 0.5-3%.). Certification: ENCS. Product Code: PIM000005671. | Australia |
| Silaplane FM-0725 | Silaplane FM-07 series, including Silaplane FM-0725 with a Molecular Weight (Mn) of 10000, can react with Acrylic resins to impart the excellent properties of silicone to various organic resins. As a result, Silaplane can be used as a raw material for polymers. Group: Specialty chemicals, electronic & specialties, paints & coatings, polymers. CAS No. 146632-07-7. Composition: Reactive silicone. Application: Adhesives & Sealants, Architectural and Deco., Automotive Paints, Construction, Electronic Chemicals, Fibers, Textiles & Films, Lamination and Converting, Masterbatch & Compounders, Polymer Producers, Powder Coating, Printing Inks, Rubber & Elastomers, Thermosets & Composites, Thermoplastic Transformers. Function: Adhesion Promoters, Anti-Graffiti, Antiscratch, Coupling Agents / Chain extenders, Dispersing Agents, Intermediates & Accelerators, Optical Materials, Other, Reagents, Rheology Modifiers, Semiconductor Materials, Surface Modifiers - Defoamers, Water Repellents, Acrylic Dispersions, Acrylic Emulsions, Acrylic Resins, Amino - Melamine - Urea Resins, Epoxy Resins, Phenolic Resins, Polyamide, Polyisocyanates, Polyurethane / Polyaspartics, Polyurethane Dispersions, Redispersable Powder, SBR Emulsions, Silane Terminated Polyethers, Silicone Resins, Styrene-Acrylic Dispersions, UV Binders and Oligomers, Vinyl Resins, Complex Inorganic Pigments, Functional Dyes, Iron Oxide, TiO7 (Titanium Dioxide), POLYMERS, Polymer Producers/Rheology modifier, SBR, Silicone Rubber, TPU, Raw Material for Electronics. Physical Form: Liquid. Recommended Dosage: 0.1-10% (Often in the range of 0.5-3%.). Certification: ENCS. Product Code: PIM000088305. | Australia |
| Silaplane FM-7711 | Silaplane FM-77 series, including Silaplane FM-7711 with a Molecular Weight (Mn) of 1000, can react with Acrylic resins to impart the excellent properties of silicone to various organic resins. As a result, Silaplane can be used as a raw material for polymers. Group: Specialty chemicals, electronic & specialties, paints & coatings, polymers. CAS No. 58130-03-3, 804475-35-2. Composition: Reactive silicone. Application: Adhesives & Sealants, Architectural and Deco., Automotive Paints, Construction, Electronic Chemicals, Fibers, Textiles & Films, Lamination and Converting, Masterbatch & Compounders, Polymer Producers, Powder Coating, Printing Inks, Rubber & Elastomers, Thermosets & Composites, Thermoplastic Transformers. Function: Adhesion Promoters, Anti-Graffiti, Antiscratch, Coupling Agents / Chain extenders, Dispersing Agents, Intermediates & Accelerators, Optical Materials, Other, Reagents, Rheology Modifiers, Semiconductor Materials, Surface Modifiers - Defoamers, Water Repellents, Acrylic Dispersions, Acrylic Emulsions, Acrylic Resins, Amino - Melamine - Urea Resins, Epoxy Resins, Phenolic Resins, Polyamide, Polyisocyanates, Polyurethane / Polyaspartics, Polyurethane Dispersions, Redispersable Powder, SBR Emulsions, Silane Terminated Polyethers, Silicone Resins, Styrene-Acrylic Dispersions, UV Binders and Oligomers, Vinyl Resins, Complex Inorganic Pigments, Functional Dyes, Iron Oxide, TiO11 (Titanium Dioxide), POLYMERS, Polymer Producers/Rheology modifier, SBR, Silicone Rubber, TPU, Raw Material for Electronics. Physical Form: Liquid. Recommended Dosage: 0.1-10% (Often in the range of 0.5-3%.). Certification: ENCS. Product Code: PIM000088310. | Australia |
| Silaplane FM-7721 | Silaplane FM-77 series, including Silaplane FM-7721 with a Molecular Weight (Mn) of 5000, can react with Acrylic resins to impart the excellent properties of silicone to various organic resins. As a result, Silaplane can be used as a raw material for polymers. Group: Specialty chemicals, electronic & specialties, paints & coatings, polymers. CAS No. 58130-03-3, 804475-35-2. Composition: Reactive silicone. Application: Adhesives & Sealants, Architectural and Deco., Automotive Paints, Construction, Electronic Chemicals, Fibers, Textiles & Films, Lamination and Converting, Masterbatch & Compounders, Polymer Producers, Powder Coating, Printing Inks, Rubber & Elastomers, Thermosets & Composites, Thermoplastic Transformers. Function: Adhesion Promoters, Anti-Graffiti, Antiscratch, Coupling Agents / Chain extenders, Dispersing Agents, Intermediates & Accelerators, Optical Materials, Other, Reagents, Rheology Modifiers, Semiconductor Materials, Surface Modifiers - Defoamers, Water Repellents, Acrylic Dispersions, Acrylic Emulsions, Acrylic Resins, Amino - Melamine - Urea Resins, Epoxy Resins, Phenolic Resins, Polyamide, Polyisocyanates, Polyurethane / Polyaspartics, Polyurethane Dispersions, Redispersable Powder, SBR Emulsions, Silane Terminated Polyethers, Silicone Resins, Styrene-Acrylic Dispersions, UV Binders and Oligomers, Vinyl Resins, Complex Inorganic Pigments, Functional Dyes, Iron Oxide, TiO12 (Titanium Dioxide), POLYMERS, Polymer Producers/Rheology modifier, SBR, Silicone Rubber, TPU, Raw Material for Electronics. Physical Form: Liquid. Recommended Dosage: 0.1-10% (Often in the range of 0.5-3%.). Certification: ENCS. Product Code: PIM000088311. | Australia |
| Silaplane FM-DA11 | Silaplane FM-DA series, including Silaplane FM-DA11 with a Molecular Weight (Mn) of 1000, can react with urethane resins and polyesters to impart the excellent properties of silicone to various organic resins. As a result, Silaplane can be used as a raw material for polymers, filler dispersants, and surface treatment agents. Group: Specialty chemicals, electronic & specialties, paints & coatings, polymers. CAS No. 218131-11-4, 222416-18-4. Composition: Reactive silicone. Application: Adhesives & Sealants, Architectural and Deco., Automotive Paints, Construction, Electronic Chemicals, Fibers, Textiles & Films, Lamination and Converting, Masterbatch & Compounders, Polymer Producers, Powder Coating, Printing Inks, Rubber & Elastomers, Thermosets & Composites, Thermoplastic Transformers. Function: Adhesion Promoters, Anti-Graffiti, Antiscratch, Coupling Agents / Chain extenders, Dispersing Agents, Intermediates & Accelerators, Optical Materials, Other, Reagents, Rheology Modifiers, Semiconductor Materials, Surface Modifiers - Defoamers, Water Repellents, Acrylic Dispersions, Acrylic Emulsions, Acrylic Resins, Amino - Melamine - Urea Resins, Epoxy Resins, Phenolic Resins, Polyamide, Polyisocyanates, Polyurethane / Polyaspartics, Polyurethane Dispersions, Redispersable Powder, SBR Emulsions, Silane Terminated Polyethers, Silicone Resins, Styrene-Acrylic Dispersions, UV Binders and Oligomers, Vinyl Resins, Complex Inorganic Pigments, Functional Dyes, Iron Oxide, TiO8 (Titanium Dioxide), POLYMERS, Polymer Producers/Rheology modifier, SBR, Silicone Rubber, TPU, Raw Material for Electronics. Physical Form: Liquid. Recommended Dosage: 0.1-10% (Often in the range of 0.5-3%.). Product Code: PIM000088306. | Australia |
| Silaplane FM-DA21 | Silaplane FM-DA series, including Silaplane FM-DA21 with a Molecular Weight (Mn) of 5000, can react with urethane resins and polyesters to impart the excellent properties of silicone to various organic resins. As a result, Silaplane can be used as a raw material for polymers, filler dispersants, and surface treatment agents. Group: Specialty chemicals, electronic & specialties, paints & coatings, polymers. CAS No. 218131-11-4, 222416-18-4. Composition: Reactive silicone. Application: Adhesives & Sealants, Architectural and Deco., Automotive Paints, Construction, Electronic Chemicals, Fibers, Textiles & Films, Lamination and Converting, Masterbatch & Compounders, Polymer Producers, Powder Coating, Printing Inks, Rubber & Elastomers, Thermosets & Composites, Thermoplastic Transformers. Function: Adhesion Promoters, Anti-Graffiti, Antiscratch, Coupling Agents / Chain extenders, Dispersing Agents, Intermediates & Accelerators, Optical Materials, Other, Reagents, Rheology Modifiers, Semiconductor Materials, Surface Modifiers - Defoamers, Water Repellents, Acrylic Dispersions, Acrylic Emulsions, Acrylic Resins, Amino - Melamine - Urea Resins, Epoxy Resins, Phenolic Resins, Polyamide, Polyisocyanates, Polyurethane / Polyaspartics, Polyurethane Dispersions, Redispersable Powder, SBR Emulsions, Silane Terminated Polyethers, Silicone Resins, Styrene-Acrylic Dispersions, UV Binders and Oligomers, Vinyl Resins, Complex Inorganic Pigments, Functional Dyes, Iron Oxide, TiO9 (Titanium Dioxide), POLYMERS, Polymer Producers/Rheology modifier, SBR, Silicone Rubber, TPU, Raw Material for Electronics. Physical Form: Liquid. Recommended Dosage: 0.1-10% (Often in the range of 0.5-3%.). Certification: ENCS. Product Code: PIM000088308. | Australia |
| Silaplane FM-DA26 | Silaplane FM-DA series, including Silaplane FM-DA26 with a Molecular Weight (Mn) of 15000, can react with urethane resins and polyesters to impart the excellent properties of silicone to various organic resins. As a result, Silaplane can be used as a raw material for polymers, filler dispersants, and surface treatment agents. Group: Specialty chemicals, electronic & specialties, paints & coatings, polymers. CAS No. 218131-11-4. Composition: Reactive silicone. Application: Adhesives & Sealants, Architectural and Deco., Automotive Paints, Construction, Electronic Chemicals, Fibers, Textiles & Films, Lamination and Converting, Masterbatch & Compounders, Polymer Producers, Powder Coating, Printing Inks, Rubber & Elastomers, Thermosets & Composites, Thermoplastic Transformers. Function: Adhesion Promoters, Anti-Graffiti, Antiscratch, Coupling Agents / Chain extenders, Dispersing Agents, Intermediates & Accelerators, Optical Materials, Other, Reagents, Rheology Modifiers, Semiconductor Materials, Surface Modifiers - Defoamers, Water Repellents, Acrylic Dispersions, Acrylic Emulsions, Acrylic Resins, Amino - Melamine - Urea Resins, Epoxy Resins, Phenolic Resins, Polyamide, Polyisocyanates, Polyurethane / Polyaspartics, Polyurethane Dispersions, Redispersable Powder, SBR Emulsions, Silane Terminated Polyethers, Silicone Resins, Styrene-Acrylic Dispersions, UV Binders and Oligomers, Vinyl Resins, Complex Inorganic Pigments, Functional Dyes, Iron Oxide, TiO10 (Titanium Dioxide), POLYMERS, Polymer Producers/Rheology modifier, SBR, Silicone Rubber, TPU, Raw Material for Electronics. Physical Form: Liquid. Recommended Dosage: 0.1-10% (Often in the range of 0.5-3%.). Certification: ENCS. Product Code: PIM000088309. | Australia |
| Silaplane TM-0701T | Silaplane TM-0701T with a Molecular Weight (Mn) of 423 can react with Acrylic resins to impart the excellent properties of silicone to various organic resins. As a result, Silaplane can be used as a raw material for polymers. Group: Specialty chemicals, electronic & specialties, paints & coatings, polymers. CAS No. 17096-07-0. Composition: Reactive silicone. Application: Adhesives & Sealants, Architectural and Deco., Automotive Paints, Construction, Electronic Chemicals, Fibers, Textiles & Films, Lamination and Converting, Masterbatch & Compounders, Polymer Producers, Powder Coating, Printing Inks, Rubber & Elastomers, Thermosets & Composites, Thermoplastic Transformers. Function: Adhesion Promoters, Anti-Graffiti, Antiscratch, Coupling Agents / Chain extenders, Dispersing Agents, Intermediates & Accelerators, Optical Materials, Other, Reagents, Rheology Modifiers, Semiconductor Materials, Surface Modifiers - Defoamers, Water Repellents, Acrylic Dispersions, Acrylic Emulsions, Acrylic Resins, Amino - Melamine - Urea Resins, Epoxy Resins, Phenolic Resins, Polyamide, Polyisocyanates, Polyurethane / Polyaspartics, Polyurethane Dispersions, Redispersable Powder, SBR Emulsions, Silane Terminated Polyethers, Silicone Resins, Styrene-Acrylic Dispersions, UV Binders and Oligomers, Vinyl Resins, Complex Inorganic Pigments, Functional Dyes, Iron Oxide, TiO13 (Titanium Dioxide), POLYMERS, Polymer Producers/Rheology modifier, SBR, Silicone Rubber, TPU, Raw Material for Electronics. Physical Form: Liquid. Recommended Dosage: 0.1-10% (Often in the range of 0.5-3%.). Certification: EINECS, ENCS. Product Code: PIM000088312. | Australia |
| Silica fume (Densified and Undensified) | Silica Fume is a filtered powder made from amorphous silica. Silica fume is a by product of the reaction between quartz and coal, coke or wood-chips and also forms in the production of silicon and ferrosilicon alloys. The addition of Extrema-Dur® Silica Fume to Portland cement produces many benefits, including increased compressive strength, bond strength, workability and abrasion and corrosion resistance. It decreases permeability and porosity and is economically and environmentally viable as it is saved from landfill. Silica Fume is available in either densified or undensified grades. [new paragraph]. Uses: Both grades are commonly added to Portland cement for strength and workability in the construction industry. Densified Silica Fume is also used in oil well drilling, refractories, rubber and plastics, coatings, ceramics and as a fertiliser additive. Group: Drymix, shotcrete, other additives. Pack Sizes: 25 kg or 50 kg PP bags, and 950 kg or 1000 kg PP jumbo bags. Trading Locations; Sydney, Houston, Dubai, Jakarta, Ho Chi Minh City, Bangkok, Kuala Lumpur and Singapore. |  |
Our database is helping our users find suppliers everyday.
