Find where to buy products from Australian suppliers, including: distributors, industrial manufacturers, bulk supplies and wholesalers of raw ingredients & finished goods.
Search for products or services, then visit the suppliers website for prices, SDS or more information. You can also view suppliers in NZ, UK or the USA.
| Product | Description | |
|---|---|---|
| 3M GLASS BUBBLES K15 | Glass Bubbles K15 have a density of 0.15 g/cc and an isostatic crush strength of 300 psi. 3M glass bubbles K15 are ideal for use in a variety of water buoyancy applications, including additives in buoys and moorings. Like all 3M glass bubbles, K15 bubbles are compatible thermoset resins like polyurethane and epoxy, and are virtually insoluble in water. Group: Specialty chemicals, paints & coatings. Composition: Soda-lime-borosilicate glass. Application: Architectural and Deco., Adhesives & Sealants, Automotive Paints, Lamination and Converting, Powder Coating, Can, Coil and Industrial. Physical Form: Nano powder. Product Code: PIM000031756. |  Australia |
| 3M GLASS BUBBLES K20 | 3M GLASS BUBBLES. K20 have a density of 0.20 g/cc and an isostatic crush strength of 500 psi. These general purpose spheres have a good strength-to-density ratio and are designed for use in a variety of shallow water (e.g. up to 2,000 feet of sea water) buoyancy applications, as well as emulsion explosives. Group: Specialty chemicals, paints & coatings. Composition: Soda-lime-borosilicate glass. Application: Architectural and Deco., Adhesives & Sealants, Automotive Paints, Lamination and Converting, Powder Coating, Can, Coil and Industrial. Physical Form: Nano powder. Product Code: PIM000031757. | Australia |
| 3M GLASS BUBBLES K25 | 3M glass bubbles K25 ideal additives for shallow water buoyancy applications or processing applications where high strength is needed. In addition, like all 3M glass bubbles, K25 bubbles are compatible with thermoset resins like polyurethane and epoxy, and are virtually insoluble in water. Application: Paints and Coatings, Rubber and Plastic, Transportation. Group: Specialty chemicals, paints & coatings. Composition: Soda-lime-borosilicate glass. Application: Architectural and Deco., Adhesives & Sealants, Automotive Paints, Lamination and Converting, Powder Coating, Can, Coil and Industrial. Physical Form: Nano powder. Product Code: PIM000031758. | Australia |
| 3M GLASS BUBBLES S28HS | Glass Bubbles S28HS are hollow glass spheres with a typical density of 0.28 g/cc and an isostatic crush strength of 3,000 psi. These glass bubbles are designed for numerous applications such as deep water syntactic foams and airless spray coatings. The bubbles produce strong, stable voids with low thermal conductivity, helping the coating achieve the necessary compressive strength. The S28HS Glass Bubbles offer a very good strength-to-density ratio and small particle size, making them suitable for a variety of applications such as buoyancy in oil and gas, airless sprayable paints and coatings, adhesives, mastics, sealants, SMC and other thermoset resin systems. Group: Specialty chemicals, paints & coatings. Composition: Soda-lime-borosilicate glass. Application: Architectural and Deco., Adhesives & Sealants, Automotive Paints, Lamination and Converting, Powder Coating, Can, Coil and Industrial. Physical Form: Nano powder. Product Code: PIM000031760. | Australia |
| A-C 6 | A-C 6 is a low density polyethylene (LDPE) homopolymer in a prill form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. Can also be partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. Used in cable flooding compounds, along with polybutene. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 9002-88-4. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Adhesives & Sealants. Function: Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.1~2%. Certification: REACH. Product Code: PIM000007910. | Australia |
| ACUMIST A-12 | ACUMIST A12 is Micronized Oxidized Polyethylene Homopolymer for use in water based coatings, flexographic and gravure inks and overprint varnishes. It also can be used as a processing aid, matting and antissetling agent in paints. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 68441-17-8. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Adhesives & Sealants. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.5~1%. Certification: REACH. Product Code: PIM000007936. | Australia |
| ACUMIST C-5 | ACUMIST C-5 is medium particle size micronized Polyethylene Homopolymer for use in solvent borne coatings and solvent based flexographic inks. As with all ACumist products, it is insoluble in solvents and UV based monomers and oligomers at room temperature. best suited goroffset inks, can coatings , and all thin film solvent based coatings. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 68441-17-8. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Adhesives & Sealants. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.5~1%. Certification: REACH. Product Code: PIM000007930. | Australia |
| ACUMIST D-6 | ACUMIST D-6 is micronized Polyethylene Homopolymer for use and general purpose solvent borne coatings, stains and lacquers, and gravure inks. It provides a good balance of properties where economics are of paramount concern. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 68441-17-8. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Adhesives & Sealants. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.5~1%. Certification: REACH. Product Code: PIM000007933. | Australia |
| ACUMIST D-9 | D-9 Micronized Polyethylene Homopolymer for use general purpose solvent borne coatings, stains and lacquers, and gravure inks. It provides a good balance of properties where economics are of paramount concernMostlu used in Gravure inks for slip and rubs. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 68441-17-8. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Adhesives & Sealants. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.5~1%. Certification: REACH. Product Code: PIM000007934. | Australia |
| ACUMIST P-10 | ACUMIST P10 is micronized polypropylene for matting and non-skid or non-slip applications for industrial solvent coatings. Excellent abrasion resistance. Used in Powder Coating for matting and scratch resistance. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 68441-17-8. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Adhesives & Sealants. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.5~1%. Certification: REACH. Product Code: PIM000007935. | Australia |
| ALBAWHITE 70 | ALBAWHITE 70 is a German madenatural barium sulfate concentrate, ALBAWHITE 70 is a good dispersable extender. ALBAWHITE 70 offers a list of great benefits and properties; as resistant to acids and alkalis, insoluble in water and organic solvents, lightfast and weatherproof, high brightness, colour neutral due to low refractive index, extremely low electrical conductivity, low binder demand & low abrasiveness due to low silica content. ALBAWHITE 70 is suitable for anti-corrosive paints & facade paints, powder coatings, adhesives & sealants, and plastics production. Group: Specialty chemicals, paints & coatings. Composition: Barium sulphate concentrates. Application: Powder Coating, Automotive Paints, Adhesives & Sealants. Function: ADDITIVES, Dispersing Agents. Physical Form: Nano powder. Product Code: PIM000034637. | Australia |
| ANOX 20 POWDER | ANOX 20 is a phenolic antioxidant stabilizer is a high molecular weight hindered phenolic antioxidant that provides very low volatility and excellent resistance to extraction from polymer compounds. ANOX 20 is particularly effective against polymer degradation during long-term aging. It is also very effective as a process stabilizer. ANOX 20 exhibits good resistance to discoloration at the high temperatures that are encountered in thermoplastic polymer processing. Please see the specification sheet below and for further details contact our local sales representative today. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 6683-19-8. Composition: Tetrakismethylene (3,5-di-t-butyl-4-hydroxyhydrocinnamate) methane. Application: Adhesives & Sealants, Thermoplastic Transformers. Function: ADDITIVES, Antioxidants, Stabilisers. Physical Form: Micronized Powder. Product Code: PIM000050175. | Australia |
| ANOX BB011 | ANOX BB011 is a stabilizer blend a family of solid binary synergistic blends used to protect polymers during processing and long-term aging. ANOX BB011 and ANOX BB021 stabilizer blends with a combination of a high molecular weight hindered phenol: ANOX 20 stabilizer, and a phosphite: ALKANOX 240 phosphite, provide excellent protection in polyolefins. The low volatility of the ANOX 20 stabilizer and ALKANOX 240 phosphite allows the blends to be used at relatively high temperatures while providing excellent resistance to extraction from polymer compounds. The blends are active during polymer processing and provide excellent stabilization against thermo-oxidative degradation during long term aging. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 6683-19-8, 31570-04-4. Composition: Benzenepropanoic acid, 3,5-bis(1,1- dimethylethyl)-4-hydroxy-2,2bis[[3- [3,5-bis(1,1-dimethylethyl)-4- hydroxyphenyl]-1-oxo propoxy] methyl]-1,3-propanediyl ester Phenol2,4-bis(1,1dimethylethyl)phosphite (3:1). Application: Adhesives & Sealants. Function: ADDITIVESAntioxidants. Physical Form: Micronized Powder. Product Code: PIM000061930. | Australia |
| AQUOLIN 270 | AQUOLIN 270 is a water dispersible polyisocyanate based on hexamethylene diisocyanate (HDI). In combination with waterborne polyurethane, polyacrylate, etc., it can be used for water-borne coatings and adhesives. Group: Specialty chemicals, paints & coatings. Composition: Hydrophilic aliphatic Polyisocyanate. Application: Can, Coil and Industrial, Printing Inks, Adhesives & Sealants, Construction, Automotive Paints, Fibers, Textiles & Films. Function: Catalysts - crosslinkers. Physical Form: Liquid. Certification: REACH. Product Code: PIM000008982. | Australia |
| AROMATIC SOLVENT S-100 | AROMATIC SOLVENT S-100 is a colourless & transparent liquid, that can be used in a wide range of applications. Group: Specialty chemicals, electronic & specialties, paints & coatings, polymers. CAS No. Application: Adhesives & Sealants, Printing Inks, Lamination and Converting. Function: SOLVENTSOther. Physical Form: Liquid. Product Code: PIM000049631. | Australia |
| AXIDEW S640 | AXIDEW S640 is an anionic foaming surfactant. Group: Specialty chemicals, electronic & specialties. Composition: Proprietary blend. Application: Adhesives & Sealants. Function: PIGMENTS, TiO2. Physical Form: Liquid. Product Code: PIM000009195. | Australia |
| AXISOL D134 | AXISOL D134 is an ammonium stearate dispersion which is an effective foam stabiliser for frothed latex systems. Group: Specialty chemicals, polymers. Composition: Proprietary blend. Application: Adhesives & Sealants, Automotive Paints, Can, Coil and Industrial, Construction, Fibers, Textiles & Films, Masterbatch & Compounders, Powder Coating, Printing Inks. Function: TiO2. Physical Form: Liquid. Recommended Dosage: 3-10%. Product Code: PIM000009218. | Australia |
| BENAQUA 4000 | BENAQUA 4000 is a rheological additive designed for lower-gloss and matt latex paints, textured and high-build coatings and water-borne adhesives. It is especially useful in systems that are diluted with water prior to use. Group: Specialty chemicals, paints & coatings. Composition: Polymer modified clay. Application: Adhesives & Sealants, Construction, Architectural and Deco. Function: ADDITIVES, Rheology Modifier. Physical Form: Micronized Powder. Product Code: PIM000002111. | Australia |
| BENTONE 27 | BENTONE 27 is a conventional hectorite-based organoclay for high polarity systems, polyol, epoxy, etc. Group: Specialty chemicals, paints & coatings. Composition: Organic derivative of a hectorite-based organoclay. Application: Can, Coil and Industrial, Construction, Printing Inks, Adhesives & Sealants. Function: ADDITIVES, Rheology Modifiers. Physical Form: Micronized Powder. Product Code: PIM000009003. | Australia |
| BENTONE 54 | BENTONE 54 is a conventional organoclay for low to intermediate polarity organic systems. Group: Specialty chemicals, paints & coatings. CAS No. Composition: Organic derivative of a organoclay. Application: Printing Inks, Can, Coil and Industrial, Adhesives & Sealants, Construction, Architectural and Deco. Function: ADDITIVES, Rheology Modifiers. Physical Form: Micronized Powder. Product Code: PIM000009004. | Australia |
| BENTONE® EW | BENTONE® EW is a rheological additive for water-borne systems. BENTONE® EW additive is a highly beneficiated, easily dispersible powdered smectite clay. Its applications are Adhesives, Ceramic compounds, Ceramic glazes, Corrosion-inhibitive primers, Cosmetics, Crop protection agents, Electrodeposition coatings, Latex paints, Foundry paints/foundry resins (washes), Oil-in-water emulsions, Other water-borne paint systems, Paper coatings, Polishes and cleaners, Welding electrode. Group: Specialty chemicals, paints & coatings. Composition: Organically modified and beneficiated smectite clay. Application: Architectural and Deco., Adhesives & Sealants. Function: ADDITIVESRheology Modifiers. Physical Form: Micronized Powder. Product Code: PIM000000906. | Australia |
| BENZOFLEX 2088 PLASTICIZER | BENZOFLEX 2088 PLASTICIZER is a high solvating plasticiser known for its exceptional performance in PVC, polyvinyl acetate and water-based adhesive systems. It has the application in Flooring, Adhesives/sealants B&C & Vinyl plastisols. It displays excellent wet track, set time and open times and also improve adhesion in acrylic latex caulks. In PVC it serves as a fast fueser, delivering low processing tempertaures and low volatility. Group: Specialty chemicals, paints & coatings. Composition: Benzoate Esters. Application: Adhesives & Sealants, Construction. Function: SOLVENTS, Base Oils & Plasticizers. Physical Form: Liquid. Product Code: PIM000039764. | Australia |
| BENZOFLEX 50 PLASTICIZER | BENZOFLEX 50 PLASTICIZER is known for its exceptional performance in polyvinyl acetate and water-based adhesives. It provides the application in Adhesives/ sealants B&C, Flexible PVC compounds, General industrial coatings, Paints & coatings, Vinyl plastisols. Group: Specialty chemicals, paints & coatings. Composition: Benzoate Esters. Application: Adhesives & Sealants, Construction. Function: SOLVENTS, Base Oils & Plasticizers. Physical Form: Liquid. Product Code: PIM000039765. | Australia |
| BENZOFLEX 9-88 PLASTICIZER | BENZOFLEX 9-88 PLASTICIZER is a high solvating plasticizer that has been used for many years in a wide variety of polymer systems and applications. Its diverse uses include resilient flooring, adhesives, artificial leather cloth and caulk. It has provides the application of Adhesives/sealants-b&c, Automotive, Flooring, Polyurethanes. Group: Specialty chemicals, paints & coatings. Composition: Dipropyleneglycol dibenzoate, Benzoate Esters. Application: Adhesives & Sealants, Construction. Function: SOLVENTS, Base Oils & Plasticizers. Physical Form: Liquid. Product Code: PIM000039775. | Australia |
| BENZOFLEX 9-88 SG PLASTICIZER | BENZOFLEX 9-88 SG PLASTICIZER is a non-phthalate plasticizer specifically designed for 2K polyurethane systems where it is very compatible and efficient. Group: Specialty chemicals, paints & coatings. Composition: Dipropyleneglycol dibenzoate, Benzoate Esters. Application: Adhesives & Sealants. Function: ADDITIVES, Adhesion Promoters, Other. Physical Form: Liquid. Product Code: PIM000039776. | Australia |
| BLANC FIXE F | BLANC FIXE F, manufactured by VENATOR, is a high-quality, synthetic barium sulfate used primarily in the paint and coatings industry. This product is known for its exceptional purity, fine particle size, and excellent dispersibility. It is made from a combination of barium and sulfate, resulting in a product that enhances brightness, color strength, and durability. BLANC FIXE F is also used in plastics, rubber, and ink applications, offering versatility and superior performance. Group: Specialty chemicals, paints & coatings, polymers. Composition: Barium Sulphate. Application: Architectural and Deco., Printing Inks, Thermosets & Composites, Can, Coil and Industrial, Adhesives & Sealants, Powder Coating, Masterbatch & Compounders. Function: PIGMENTS, Other. Physical Form: Micronized Powder. Product Code: PIM000032261. | Australia |
| BLANC FIXE N | BLANC FIXE N, manufactured by VENATOR, is a high-quality, synthetic barium sulfate used extensively in the paints, coatings, and plastics industry. This product is known for its exceptional purity, fine particle size, and excellent dispersibility. BLANC FIXE N is made from a combination of barium and sulfur, offering superior lightfastness and weather stability. It's the perfect choice for those seeking to enhance the brightness and color strength of their products. Group: Specialty chemicals, paints & coatings. CAS No. 7727-43-7. Composition: Barium Sulphate. Application: Adhesives & Sealants, Architectural and Deco., Can, Coil and Industrial, Masterbatch & Compounders, Powder Coating, Printing Inks, Thermosets & Composites. Function: Organic Pigment. Physical Form: Micronized Powder. Product Code: PIM000032260. | Australia |
| BLOWN CASTOR OIL | Blown Castor Oil manufactured under thermally controlled conditions in the presence of air to give products with increased viscosities, specific gravities and reactivity's blown castor oil is a golden yellow to honey coloured viscous liquid. Blown Castor Oil is a derivative that has a higher viscosity and specific gravity compared to natural castor oil. Key Function: Binder, solvent. Key Application: Adhesives, Inks, Lubrication, Polish, Caulks and sealants, Leather dressing , Rubber compounding. Group: Specialty chemicals, electronic & specialties, paints & coatings, polymers. CAS No. 68187-84-8. Composition: Ricinus Communis. Application: Rubber & Elastomers, Printing Inks, Adhesives & Sealants, Lubricants. Function: BINDERS, Polyester. Physical Form: Liquid. Product Code: PIM000031963. | Australia |
| BUTVAR® B-72 | BUTVAR® B-72 is a thermoplastic, polyvinyl butyral resin which offers a unique combination of properties for coating or adhesive applications. The use or addition of polyvinyl butyral to a system imparts adhesion, toughness, and flexibility. PVB retains the clarity of the coating and offers reactive hydroxyl sites for crosslinking with thermoset systems. Group: Specialty chemicals, paints & coatings. Composition: No Hazardous Ingredients. Application: Powder Coating, Adhesives & Sealants. Function: ADDITIVES, Adhesion Promoters. Physical Form: Nano powder. Product Code: PIM000039777. | Australia |
| CAB-O-SIL® & CAB-O-SPERSE® | Due to their unique particle characteristics, our hydrophilic fumed silicas provide superior performance benefits for many types of applications, including: Adhesives and sealants, agriculture and lawn care, Chemical mechanical planarization, Coatings, Composites, Food additives, Greases, Pharmaceuticals, Printing and packaging, Silicone sealants, Skin and beauty care products. Uses: We offer a wide portfolio of fumed metal oxide products to meet your performance requirements. Our CAB-O-SIL® fumed silicas are powders that are available with either hydrophobic or hydrophilic surfaces. The versatility of our CAB-O-SIL fumed silicas is due to key product attributes, such as high surface area, surface chemistry, aggregated structure and purity, all of which lead to excellent performance. Group: Fumed Metal Oxides. CAS No. 112945-52-5. Pack Sizes: Loadability Varies. Product ID: CSL. |  |
| Cenospheres | Cenospheres, also known as Hollow Ceramic Microspheres, are thin walled hollow ceramic spheres with a diversity of applications. Composed principally of silica and alumina, and sized typically below 300 microns, Cenospheres are characterised by low bulk density, high melting point, high strength, and uniform sphericity. In cementitious systems, sealants, and putties Cenospheres can be used to modify rheology, reduce weight and shrinkage and improve thermal insulation. In composites and other polymer applications, Cenospheres reduce resin demand, and improve impact resistance and strength. Specialised Cenospheres grades are available for rigorous application conditions in Refractories and Surface Coatings. Applications for Cenospheres are numerous. Some of these include Plastics and gel-coats and used in Polyurethane, Latex Emulsions, PVC, Epoxy Resins & Unsaturated Polyester Resins. In the cementitious products sector they are used in dry-mix adhesives, mortars, jointing compounds, and oil-well cements. Trading Locations; Sydney, Houston, Dubai, Jakarta, Ho Chi Minh City, Bangkok, Kuala Lumpur and Singapore. |  |
| Conseal - Natural Look Sealer | CONSEAL is a water based sealant that is used to impart water resistance & surface protection properties to most porous building materials to maintain, enhance or preserve the materials original appearance & integrity. CONSEAL may be used with confidence on most types of concrete, liquid limestone, clay bricks, reconstituted limestone, mortar, render, & grout. CONSEAL may also be used to build hydrophobic qualities into render, shotcrete, concrete blocks, artificial stones or other building components during manufacture at level of 0.6 to 6%. Note: CONSEAL is not suitable for sealing dense stone such as marble. Use as received. Apply to clean surface by spraying, rolling or painting. Allow to dry and 24 hours to react invisibly with surface. One coat is usually sufficient for most surfaces. COVERAGE: 1 litre treats between 30 to 50m2 of surface depending on application method and porosity of surface treated. CONSEAL when admixed during manufacture of concrete or render should be used at level of 0.6% to 6% to impart water proofing to the concrete. Pack Sizes: 5 Litre, 20 Litres. Product ID: WC1051. Chemicals By Industry, Universal Products. |  Australia Wide |
| DAPRO® BIO 400 | DAPRO® BIO 400 is a bio-based solvent, a highly efficient replacement for glycol coalescence solvents, appears in a clear liquid form and provides superior performance and low odor. DAPRO® BIO 400 offers an effective reduction of MFFT and a 100% biobased carbon content. DAPRO® BIO 400 is recommended to use in water based emulsion coatings for both interior and exterior applications, sustainable coatings, low VOC coatings, cleaners, paint strippers, adhesives and sealants applications. Please see the specification sheet below and for further details contact our local sales representative today. Group: Specialty chemicals, paints & coatings. Composition: Levulinic ketal. Application: Adhesives & Sealants, Architectural and Deco., Can, Coil and Industrial, Construction. Function: SOLVENTSOther. Physical Form: Liquid. Claim: Bio-Based, Renewable, Low VOC. Product Code: PIM000046880. | Australia |
| DAPRO® FX 514 | DAPRO® FX 514 is an advanced plasticizer made from renewable resources, offering a VOC-free and low-odor solution for aqueous adhesive systems. This cutting-edge plasticizer is specifically designed to optimize film formation, plasticization, and long-term flexibility in low or zero-VOC water-based adhesives. With enhanced tackiness, superior flexibility, and outstanding plasticizing properties, DAPRO® FX 514 provides exceptional performance and reliability in various applications, including flexible and wood floorings, all while being environmentally friendly and odorless. Upgrade your adhesive formulations with DAPRO® FX 514 to experience improved performance and sustainability. Group: Specialty chemicals, paints & coatings. CAS No. 27194-74-7. Application: Adhesives & Sealants, Can, Coil and Industrial. Function: ADDITIVES, Adhesion Promoters, ADDITIVES, Coalescents. Physical Form: Liquid. Claim: VOC Free. Product Code: PIM000002139. | Australia |
| DCC RED 6005 | DCC RED 6005 is a blue shade red pigment with very good weatherfastness in full shades and is typically used in general industrial coatings. Group: Specialty chemicals, polymers, paints & coatings. CAS No. 12238-31-2. Composition: Pigment Red 522. Application: Adhesives & Sealants, Automotive Paints, Masterbatch & Compounders, Adhesives & Sealants, Printing Inks, Powder Coating, Architectural and Deco., Can, Coil and Industrial, Automotive Paints, Can, Coil and Industrial, Construction, Fibers, Textiles & Films, Masterbatch & Compounders, Powder Coating, Printing Inks. Function: Organic Pigment. Physical Form: Solid. Product Code: PIM000003535. | Australia |
| DCC YELLOW 7151 | DCC YELLOW 7151 is a high-performance green shade yellow pigment for use in high-end coatings applications where excellent weatherfastness is required. It is also recommended for various plastic applications. Group: Specialty chemicals, polymers, paints & coatings. CAS No. 31837-42-0. Composition: Pigment Yellow 151. Application: Adhesives & Sealants, Automotive Paints, Masterbatch & Compounders, Adhesives & Sealants, Printing Inks, Powder Coating, Architectural and Deco., Can, Coil and Industrial, Automotive Paints, Can, Coil and Industrial, Construction, Fibers, Textiles & Films, Masterbatch & Compounders, Powder Coating, Printing Inks. Function: Organic Pigment. Physical Form: Solid. Product Code: PIM000003544. | Australia |
| Diamond No-Cut Resin Polish | DIAMOND NO-CUT POLISH is a great polish and sealant for all types of paintwork and colours. This product is best suited to new or moderately deteriorated paintwork, including metallic, clear coat and water-based finishes. The product contains carnauba wax for a hard and lasting shine. Wash and dry the paintwork using a quality car or truck wash to remove road grime and grit. In a shaded area out of direct sunlight, apply a 20-cent size (20mm) dab to cloth and apply to the paintwork in an overlapping circular pattern. Finish sections of panel work in straight lines to ensure even coverage. Increase the pressure over any marks, scratches or dull patches. Do not apply to unpainted rubber or plastic trim. Allow the residue to dry to a dull film and then buff by hand using a soft lint free cloth. Pack Sizes: 5 Litre. Product ID: SC401. Chemicals By Industry, Automotive. | Australia Wide |
| DL2001 | DL2001 is a prepolymer and blends for foam systems, appearing in clear liquid for one-shot formulations. DL2001 can be used in a wide variety of polyurethane applications ranging from elastomers, coatings, and adhesives. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 25322-69-4. Composition: Propane-1, 2-diol, Propoxylated. Application: Adhesives & Sealants, Polymer Producers. Function: POLYMERS, Polymer Producers/Rheology modifier. Physical Form: Liquid. Product Code: PIM000039543. | Australia |
| DMSO Liquid Dimethyl Sulfoxide 99.9% Pure Pharmaceutical Grade Solvent Bulk Size | 99.9% Pure pharmaceutical Grade DMSO, also known as Dimethyl Sulfoxide. DMSO, or dimethyl sulfoxide, is derived from Pine trees as a by product of the paper manufacturing industry. It is also naturally found in garlic as one of the roots 70+ sulfur compounds. It has long been used as a chemical solvent and chemical intermediate for: Non-industrial use, including in pesticides and fungicides, veterinary medicines; and for cosmetic use. Domestic use, including in coatings, paints, lacquers and varnishes, paint and varnish removers; cleaning products; ink and toners; fillers, putties, plasters and modelling clay; and polishes and wax blends. Commercial use, including in: anti-freeze and de-icing products; adhesives and sealants; hydraulic fluids and construction material. Specifications. Pharmaceutical Grade. Appearance: Colourless, transparent liquid. Other Names: DMSO; Methane, Sulfinylbis. Crystalline Point: 18.3?C. Assay / Purity: 99.9 %. Chemical Formula: C2H6OS. DMSO is a very temperature sensitive product. Liquid DMSO can and will crystallise in a cold environment. If this occurs, place or keep the DMSO bottle in a warm location (15°C - 20°C), and within a few hours it should go back to liquid form. For faster results, place the bottle in a clean zip lock bag, seal it, and place it in warm water. Under any circumstances, do not microwave it! Pack Sizes: |  |
| DOWSIL 510 FLUID | DOWSIL 510 Fluid demonstrate exceptional high-temperature stability during continuous use at 232°C (450°F); these materials are also suitable for low-temperature applications requiring pour points as low as -57°C (-70°F). Group: Specialty chemicals, paints & coatings, polymers. Composition: Phenylmethyl Polysiloxane. Application: Thermoplastic Transformers, Polymer Producers, Can, Coil and Industrial, Can, Coil and Industrial, Automotive Paints, Adhesives & Sealants. Function: POLYMERS, Silicone Rubber, Other, ADDITIVES, BINDERS, Silicone Resins. Physical Form: Liquid. Product Code: PIM000027081. | Australia |
| DYMEREX RESIN | DYMEREX RESIN is a pale, acidic, thermoplastic, high softening point resin. It is composed predominately of dimeric acids derived from rosin with lesser amounts of monomeric resin acids and neutral materials of rosin origin. Dymerex modified resin has high resistance to oxidation and does not crystallize from solutions or from solid compositions. It is compatible with many natural and synthetic film formers and rubbers. Being an acidic resin, it reacts readily with polyalcohols or hydrated lime to yield high melting derivatives. DYMEREX RESIN offers a alcohol-soluble, noncrystallin, resistant to oxidation, thermoplastic rosin acid and providing a very high softening point. DYMEREX RESIN is recommended to use in assembly, bookbinding, cable filling and flooding, caulks and sealants, contact adhesives, footwear and leather, hot melt adhesives, laminating, pressure sensitive, solventborne adhesives, tapes and labels, wax modification applications. Please see the brochure below and for further details contact our local sales representative today. Group: Specialty chemicals, electronic & specialties, paints & coatings, polymers. Application: Adhesives & Sealants, Others. Function: BINDERS, Other. Physical Form: Liquid. Product Code: PIM000046541. | Australia |
| EASTMAN 2-ETHYL HEXANOL | EASTMAN 2-ETHYL HEXANOL is a versatile solvent featuring excellent reactivity as a chemical intermediate. It serves as a chain terminator in synthesizing condensation polymers and as an intermediate for plasticizers. EASTMAN 2-ETHYL HEXANOL has low volatility and enhances the flow and gloss of baking enamels. It is also used as a dispersing agent for pigment pastes. EASTMAN 2-ETHYL HEXANOL complies with REACH. Group: Specialty chemicals, electronic & specialties, paints & coatings. CAS No. 104-76-7. Composition: 2-Ethylhexanol. Application: Powder Coating, Lamination and Converting, Can, Coil and Industrial, Can, Coil and Industrial, Construction, Architectural and Deco., Plant & Crop Protection, Adhesives & Sealants, Petrochemicals, Others, Lubricants. Function: SOLVENTS, Base Oils & Plasticizers. Physical Form: Liquid. Product Code: PIM000037711. | Australia |
| EASTMAN CA-398-3 FOOD CONTACT | EASTMAN CA-398-3 FOOD CONTACT is one of the lower viscosity solution grades of cellulose acetate. The average ASTM viscosity of EASTMAN CA-398-3 FOOD CONTACT is 3 seconds. EASTMAN CA-398-3 FOOD CONTACT is supplied in the form of a fine, dry, free-flowing powder. EASTMAN CA-398-3 FOOD CONTACT can offer a multipurpose rheology enhancer that provides high strength and good resistance to ultraviolet light, heat, oils, and greases. Useful in lacquers for glass, plastic, wire, and release coatings. It may be blended with appropriate solvents, plasticizers, and other modifying resins to formulate coatings for paper, glass, plastic, wire screen, and electrical wiring. When dissolved in appropriate solvents selected for EASTMAN CA-398-3 FOOD CONTACT, a clear, colourless solution is produced. Group: Specialty chemicals, paints & coatings. Composition: Mixture. Application: Lamination and Converting, Construction, Printing Inks, Powder Coating, Can, Coil and Industrial, Can, Coil and Industrial, Automotive Paints, Adhesives & Sealants. Function: ADDITIVES, Other. Physical Form: Nano powder. Product Code: PIM000037712. | Australia |
| EASTMAN CELLULOSE ACETATE BUTYRATE (CAB-381-0.1) | EASTMAN CELLULOSE ACETATE BUTYRATE (CAB-381-0.1) is a cellulose ester with medium butyryl content and low viscosity. It was designed for use where low-application viscosities at relatively high solids levels are needed. It is soluble in a wide range of solvents and compatible with many other resins. It will also tolerate the use of solvent blends currently exempt from certain air pollution regulations. When CAB-381-0.1 is dissolved in appropriate solvents a clear, colorless solution is produced. It is supplied as a dry, free-flowing powder. Group: Specialty chemicals, paints & coatings. Composition: Cellulose acetate butyrate. Application: Can, Coil and Industrial, Powder Coating, Adhesives & Sealants, Printing Inks. Function: SOLVENTSCleaner / Detergent. Physical Form: Nano powder. Product Code: PIM000039779. | Australia |
| EASTMAN CELLULOSE ACETATE BUTYRATE (CAB-381-0.5) | EASTMAN CELLULOSE ACETATE BUTYRATE (CAB-381-0.5) is a cellulose ester with medium butyryl content and low viscosity. It was designed for use where low-application viscosities at relatively high solids levels is needed. It is soluble in a wide range of solvents and compatible with many other resins. When CAB-381-0.5 is dissolved in appropriate solvents a clear, colorless solution is produced. It will also tolerate the use of solvent blends currently exempt from certain air pollution regulations. It is supplied as a dry, free-flowing powder. Group: Specialty chemicals, paints & coatings. Composition: Cellulose acetate butyrate. Application: Can, Coil and Industrial, Can, Coil and Industrial, Powder Coating, Adhesives & Sealants, Printing Inks. Function: SOLVENTS, Diluent. Physical Form: Nano powder. Product Code: PIM000039780. | Australia |
| EASTMAN CELLULOSE ACETATE BUTYRATE (CAB-381-2) | EASTMAN CELLULOSE ACETATE BUTYRATE (CAB-381-2) is a cellulose ester with medium butyryl content and high viscosity. Other than a higher viscosity and molecular weight, this cellulose ester shares the same general characteristics as CAB-381-0.1 and CAB-381-0.5. CAB-381-2 offers a combination of solubility and compatibility, moisture resistance, excellent surface hardness, and good film strength. When CAB-381-2 is dissolved in appropriate solvents, a clear, colorless solution is produced. It is supplied as a dry, free-flowing powder. Eastman CAB-381-2 is based on cellulose, one of the most abundant natural renewable resources. The calculated approximate bio-content value of 40% for Eastman CAB-381-2 was determined by using six bio-based carbon atoms per anhyroglucose unit divided by the total number of carbons per anhyroglucose unit. Although the value reported is not specifically measured for bio-carbon, it can be estimated based on typical partition data. Group: Specialty chemicals, paints & coatings. Composition: Cellulose acetate butyrate. Application: Adhesives & Sealants, Can, Coil and Industrial, Can, Coil and Industrial, Powder Coating, Printing Inks. Function: SOLVENTS, Diluent. Physical Form: Nano powder. Product Code: PIM000039766. | Australia |
| EASTMAN CELLULOSE ACETATE BUTYRATE (CAB-531-1) | EASTMAN CELLULOSE ACETATE BUTYRATE (CAB-531-1) is a cellulose ester with a higher butyryl level than Eastman CAB-381 type esters. Tough films with good resistance to marring and weathering are possible through combinations of cellulose acetate butyrate with thermoplastic acrylic resins. Eastman CAB-531-1 and CAB-381 esters are similar in hydroxyl content and solubility characteristics, both being soluble in a wide range of solvents. Eastman CAB-531-1 is a more flexible resin that requires lower plasticizer modification than the Eastman CAB-381 esters. When CAB-531-1 is dissolved in appropriate solvents, a clear, colorless solution is produced. Eastman CAB-531-1 is based on cellulose, one of the most abundant natural renewable resources. The calculated approximate bio-content value of 38% for Eastman CAB-531-1 was determined by using six bio-based carbon atoms per anhyroglucose unit divided by the total number of carbons per anhyroglucose unit. Although the value reported is not specifically measured for bio-carbon, it can be estimated based on typical partition data. Group: Specialty chemicals, paints & coatings. Composition: No Hazardous Ingredients. Application: Can, Coil and Industrial, Can, Coil and Industrial, Powder Coating, Adhesives & Sealants, Printing Inks. Function: ADDITIVES, Adhesion Promoters, Other, BINDERS, Acrylic Resins. Physical Form: Nano powder. Product Code: PIM000039781. | Australia |
| EASTMAN CELLULOSE ACETATE BUTYRATE (CAB-551-0.01) | EASTMAN CELLULOSE ACETATE BUTYRATE (CAB-551-0.01) has many unique attributes that will serve useful across many different coating application areas. It has the lowest Tg (glass transition temperature) of the CAB portfolio. It also has the second lowest M(n), which helps its compatibility with other coatings components. It is compatible with numerous cross-linking resins and has a lower solution viscosity. In coatings, Eastman CAB-551-0.01 gives clear films, reduces surface tack and mottling, minimizes cratering, improves flow and thermal reflow, and provides inter coat adhesion and good UV stability. Its good compatibility with a wide range of curing resin systems and its solubility in a wide variety of solvents and solvent combinations make it useful as an additive in numerous coating compositions. When dissolved in appropriate solvents selected for CAB-551-0.01, a clear, colorless solution is produced. It is useful in lacquers for glass, plastic, wire and release coatings and is available in pellet form. Group: Specialty chemicals, polymers. Composition: Cellulose acetate butyrate. Application: Can, Coil and Industrial, Can, Coil and Industrial, Powder Coating, Adhesives & Sealants, Printing Inks. Function: SOLVENTS, Cosolvent. Physical Form: Nano powder. Product Code: PIM000039782. | Australia |
| EASTMAN CELLULOSE ACETATE BUTYRATE (CAB-551-0.2) | EASTMAN CELLULOSE ACETATE BUTYRATE (CAB-551-0.2) is a cellulose ester with high butyryl content and relatively low molecular weight. It is compatible with numerous cross-linking resins and has a lower solution viscosity. In coatings, Eastman CAB-551-0.2 gives clear films, reduces surface tack and mottling, minimizes cratering, improves flow and thermal reflow, and provides inter coat adhesion and good UV stability. It is useful for durable cross-linked formulations. Its good compatibility with a wide range of curing resin systems and its solubility in a wide variety of solvents and solvent combinations make it useful as an additive in numerous coating compositions. When CAB-551-0.2 is dissolved in appropriate solvents a clear, colorless solution is produced. Group: Specialty chemicals, polymers. Composition: Cellulose acetate butyrate. Application: Can, Coil and Industrial, Can, Coil and Industrial, Powder Coating, Adhesives & Sealants, Printing Inks. Function: SOLVENTS, Cosolvent. Physical Form: Nano powder. Product Code: PIM000039783. | Australia |
| EASTMAN CELLULOSE ACETATE PROPIONATE (CAP-504-0.2) | EASTMAN CELLULOSE ACETATE PROPIONATE (CAP-504-0.2) is a free-flowing powder having low odor, low color, and high hydroxyl content. It is fast dissolving, has good water tolerance and resistance to souring, and is compatible with many ink resins and solvents. It has good resistance to discoloration from UV light and has good adhesion to plastics. It has a low viscosity (0.2 seconds) and has an approximate propionyl content of 42.5 wt%. When CAP-504-0.2 is dissolved in appropriate solvents, a clear, colorless solution is produced. Eastman CAP-504-0.2 is based on cellulose, one of the most abundant natural renewable resources. The calculated approximate bio-content value of 49% for Eastman CAP-504-0.2 was determined by using six bio-based carbon atoms per anhyroglucose unit divided. Group: Specialty chemicals, polymers. Composition: Cellulose acetate propionate. Application: Can, Coil and Industrial, Can, Coil and Industrial, Powder Coating, Adhesives & Sealants, Printing Inks. Function: SOLVENTS, Cosolvent. Physical Form: Nano powder. Product Code: PIM000039784. | Australia |
| EASTMAN CHLORINATED POLYOLEFIN 343-1 (100% SOLIDS) | EASTMAN CHLORINATED POLYOLEFIN 343-1 (100% SOLIDS) is supplied as a white powder and is soluble in both toluene and xylene. It is 18-23 wt. % chlorine. CP 343-1 has good resistance to high temperatures. Because of its limited solubility, solutions of CP 343-1 may become hazy, partially precipitate from solution or gel with exposure to low temperatures. Should any of the above conditions occur, warming the contents to approximately 38° 49° C, with mild agitation will generally return the product to its original condition. Care should be taken in handling or mixing nonpolar solvents such as xylene and toluene. Group: Specialty chemicals, paints & coatings. Composition: Chlorinated Polyolefin. Application: Adhesives & Sealants, Automotive Paints, Can, Coil and Industrial, Powder Coating. Function: Adhesion Promoters. Physical Form: Solid. Product Code: PIM000039785. | Australia |
| EASTMAN OPTIFILM ENHANCER 300 | EASTMAN OPTIFILM ENHANCER 300 is a biodegradable, efficient, low odor, low toxicity coalescent for latexpaints. Its broad compatibility, easy incorporation, and excellent hydrolytic stability allow its use in a wide range oflatex types. Using EASTMAN OPTIFILM ENHANCER 300 reduces formulated cost by allowing substantial reductions in associative thickeners. A greater than 25% reduction in associative thickener levels can be obtained without compromising rheology characteristics. Group: Specialty chemicals, paints & coatings. CAS No. 6846-50-0. Composition: 2, 4-Trimethyl-1, 3-pentanediol diisobutyrate. Application: Can, Coil and Industrial, Can, Coil and Industrial, Lamination and Converting, Printing Inks, Automotive Paints, Architectural and Deco., Adhesives & Sealants. Physical Form: Liquid. Product Code: PIM000035968. | Australia |
| EASTMAN OPTIFILM ENHANCER 400 | EASTMAN OPTIFILM ENHANCER 400 is an efficient coalescent that aids in the development of latex paints that have a good balance of performance properties. EASTMAN OPTIFILM ENHANCER 400 delivers excellent film integrity, touch-up properties, and scrub resistance, even at the lowest VOC demands. Paints prepared with EASTMAN OPTIFILM ENHANCER 400 have also demonstrated good exterior durability after one year of exposure. Group: Specialty chemicals, paints & coatings. Composition: Mixture. Application: Can, Coil and Industrial, Can, Coil and Industrial, Construction, Architectural and Deco., Automotive Paints, Powder Coating, Adhesives & Sealants. Function: ADDITIVES, Coalescents. Physical Form: Liquid. Product Code: PIM000037720. | Australia |
| EASTMAN PROPIONIC ACID | EASTMAN PROPIONIC ACID is a general sales grade and may be used to produce numerous esters, salts, and other derivatives for use in the plastics, coatings, agricultural chemicals, food, flavor, and perfume industries. Group: Specialty chemicals, electronic & specialties, paints & coatings. CAS No. 79-09-4. Composition: Propionic acid. Application: Adhesives & Sealants, Plant & Crop Protection, Others. Physical Form: Liquid. Product Code: PIM000035969. | Australia |
| EASTMAN TEXANOL ESTER ALCOHOL | EASTMAN TEXANOL ESTER ALCOHOL is a premier coalescent for latex paints. It performs well in all types of latexpaints, in a variety of weather conditions, and over substrates with different levels of porosity. EASTMAN TEXANOL ESTER ALCOHOL provides the highest level of film integrity at low levels of coalescence, enhancing the performance properties of the paint including low-temperature coalescence, touch-up, scrub resistance, washability, colour development, thermal flexibility, and resistance to mud cracking. EASTMAN TEXANOL ESTER ALCOHOL also enhances thickening efficiency when used with associative thickeners. Group: Specialty chemicals, paints & coatings. CAS No. 6846-50-0. Composition: 2, 4-Trimethyl-1, 3-Pentanediol Diisobutyrate. Application: Lamination and Converting, Can, Coil and Industrial, Can, Coil and Industrial, Printing Inks, Automotive Paints, Architectural and Deco., Adhesives & Sealants. Physical Form: Liquid. Product Code: PIM000035970. | Australia |
| EASTMAN TXIB FORMULATION ADDITIVE | EASTMAN TXIB FORMULATION ADDITIVE is the lowest viscosity (9 cps) additive available to the flexible PVC industry. EASTMAN TXIB FORMULATION ADDITIVE is completely compatible with PVC in all proportions and is usually blended with general-purpose plasticizers such as DOP or DOTP. EASTMAN TXIB FORMULATION ADDITIVE formulation additive has efficiency generally equal to DOP, which makes substitution in a vinyl formulation very easy. It imparts a dry surface to the vinyl, excellent resistance to staining, and physical properties equivalent to DOP. EASTMAN TXIB FORMULATION ADDITIVE is also used in inks, coatings, urethane elastomers, and nail polish lacquers. Group: Specialty chemicals, electronic & specialties, paints & coatings, polymers. CAS No. 6846-50-0. Composition: 2, 4-Trimethyl-1, 3-pentanediol diisobutyrate. Application: Polymer Producers, Others, Architectural and Deco., Adhesives & Sealants. Function: SOLVENTS, Base Oils & Plasticizers. Physical Form: Liquid. Product Code: PIM000037722. | Australia |
| EASTOFLEX E1060PL AMORPHOUS POLYOLEFIN | EASTOFLEX E1060PL AMORPHOUS POLYOLEFIN are characteristically saturated, low molecular weight, propylene-based olefin polymers. These products are inherently soft, tacky, and flexible, having a broad compatibility with numerous elastomers, polymers, and tackifying resins. Eastoflex APOs are characterized by consistent quality, low odor, good heat stability, and low color. Group: Specialty chemicals, paints & coatings. Composition: Copolymer. Application: Can, Coil and Industrial, Can, Coil and Industrial, Automotive Paints, Adhesives & Sealants. Function: POLYMERS, Unsaturated Polyester. Physical Form: Solid. Product Code: PIM000039793. | Australia |
| EPOXY RESIN YN-1828 | YN-1828 is a medium viscosity liquid epoxy resin (11-15 Pa.s) and It contains no diluents. YN1828 provides good pigment wetting and good resistance to filler settling and a high level of mechanical and chemical resistance properties in the cured state. However, as an unmodified pure bisphenol A resin, YN1828 is prone to crystallize on storage, particularly in cold conditions. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 25068-38-6. Composition: 4'-Isopropylidenediphenol, oligomeric reaction products with 1-chloro-2, 3-epoxypropane. Application: Adhesives & Sealants, Architectural and Deco., Can, Coil and Industrial, Construction. Function: Epoxy Resins. Physical Form: Liquid. Product Code: PIM000023379. | Australia |
| FINNTALC M30 | FINNTALC M30 is a functional extender made from a hydrated magnesium silicate with a chemical formula of Mg3Si4O10(OH)2. That provides great properties of being good barrier properties, good anti-corrosion properties, good reinforcement of paint film, good adhesion and standability, and matting of high PVC paint. FINNTALC M30 is perfect for your application in paints & coating, adhesives, sealants, plastics & fertilisers. Group: Specialty chemicals, paints & coatings. Composition: Talc (Mg3H2(SiO3)4), Dolomite. Application: Adhesives & Sealants, Automotive Paints. Function: ADDITIVES, Other. Physical Form: Nano powder. Product Code: PIM000039173. | Australia |
| FRJ 551 | FRJ-551 is a heat-reactive, alkylphenolic resin, that appears in a flake form. FRJ-551 exbits a low intial viscosity and maintain viscosity-stability, high cohesive strength at room temperature. FRJ-551 designed primarily for use in the formulationsof polychloroprene-based contact adhesives. Please see the brochure below and for further details contact our local sales representative today. Group: Specialty chemicals, paints & coatings. Composition: Alkylphenolic resin. Application: Adhesives & Sealants. Function: BINDERS, Alkyd Resins. Physical Form: Solid. Product Code: PIM000046540. | Australia |
| Fumed silica | Fumed silica, also known as pyrogenic silica is a multi-purpose silica-based additive commonly used to manipulate viscosity, rheology and enhance functionality of existing polymer matrices. It has a low particle size and low bulk density, meaning the surface area is very high. It is known for its film and cured adhesives strengthening, sag resistance and anti-settling properties. Bisley's brand of fumed silica Bi-SiL is available in both hydrophobic and hydrophilic grades, with a variety of specifications to choose from. We have suitable alternatives to Wacker, Cabot, Evonik and Tokuyama products, so contact us today to find the right grade for your application! Uses: Bisley's fumed silica is used in many applications, including Adhesives and sealants strengtheners, Anti-caking and thickening agents in powders, Viscosity adjustment in coatings and paint, Desiccants, Cosmetics for its light- diffusing properties and toothpaste. Group: Rheology additive, Industrial chemicals. CAS No. 112945-52-5. Pack Sizes: 10 kg paper bags. Trading Locations; Sydney, Houston, Dubai, Jakarta, Ho Chi Minh City, Bangkok, Kuala Lumpur and Singapore. | |
| GLASS BUBBLES S38HS | Glass Bubbles S38HS are hollow glass spheres with a typical density of 0.38 g/cc and an isostatic crush strength of 5,500 psi. These glass bubbles are designed for buoyancy and insulation in ultra-deep water applications in oil and gas drilling. The bubbles produce strong, stable voids and low thermal conductivity, helping coatings achieve the necessary compressive strength. These Glass Bubbles are designed for pipeline insulation in ultra-deep water applications and low density sheet moulding compounds (SMC).Applicaiton: Compounding, Insulation and Buoyancy, Paints and Coatings, Rubber and Plastic, Transportation. Group: Specialty chemicals, paints & coatings. Composition: Soda-lime-borosilicate glass. Application: Architectural and Deco., Adhesives & Sealants, Automotive Paints, Lamination and Converting, Powder Coating, Can, Coil and Industrial. Physical Form: Nano powder. Product Code: PIM000031761. | Australia |
| grotan® BA 21 | grotan® BA 21 is a preservative for technical products. Free of chloromethylisothiazolone, formaldehyde, formaldehyde depots and other aldehydes. Group: Specialty chemicals, polymers, paints & coatings, electronic & specialties. CAS No. 2372-82-9, 2634-33-5. Composition: N-(3-Aminopropyl)-N-dodecylpropane-1,3- diamine (BDA), 1,2-Benzisothiazol-3(2H)-one or BIT. Application: Masterbatch & Compounders, Fibers, Textiles & Films, Printing Inks, Construction, Can, Coil and Industrial, Architectural and Deco., Adhesives & Sealants, Powder Coating, Petrochemicals. Function: Biocides. Physical Form: Liquid. Product Code: PIM000008850. | Australia |
| grotan® TK 5 plus | grotan® TK 5 plus is a preservative for concrete additives. Group: Specialty chemicals, polymers, paints & coatings, electronic & specialties. CAS No. 586-55-8, 26530-20-1. Composition: (Ethylenedioxy)dimethanol / EDDM, 2-octyl-2H-isothiazol-3-one (OIT). Application: Masterbatch & Compounders, Fibers, Textiles & Films, Printing Inks, Construction, Can, Coil and Industrial, Architectural and Deco., Adhesives & Sealants, Powder Coating. Function: Biocides. Physical Form: Liquid. Product Code: PIM000008847. | Australia |
| HJSIL ® 200 | HJSIL® 200 is a kind of hydrophilic fumed silica with a specific surface area of 200 m2/g. Its high purity white colloidal powder. Application: HTV and RTV silicone rubber, Adhesives and sealants, Paints, coatings and pigments, Printing inks, Cable compounds, Unsaturated polyester resins, laminated resins and Gel coats. Group: Specialty chemicals, paints & coatings, polymers. Composition: hydrophilic fumed silica. Application: Rubber & Elastomers, Printing Inks, Can, Coil and Industrial, Can, Coil and Industrial, Automotive Paints, Adhesives & Sealants. Function: ADDITIVES, Adhesion Promoters. Physical Form: Nano powder. Product Code: PIM000031790. | Australia |
| HJSIL® R272 | HJSIL® R272 is a hydrophobic fumed silica, appears in a high purity white colloidal powder. HJSIL® R272 function as thickner, anti-settling agent, anti-caking agent and anti-sagging agent. HJSIL® R272 is suitable to use in adhesives and sealants, coatings and paints, printing inks and toner, cable compounds and gels & silicone rubber and silicone sealants applications. Group: Specialty chemicals, paints & coatings. CAS No. 112945-52-5. Composition: Hydrophobic fumed silica. Application: Printing Inks, Powder Coating, Adhesives & Sealants. Function: ADDITIVES, Other. Physical Form: Nano powder. Product Code: PIM000041171. | Australia |
| ITACUR 70XB-ES | ITACUR 70XB-ES is a polyaminoamide epoxy adduct in a xylene and butanol solution. Group: Specialty chemicals, polymers, paints & coatings. CAS No. 68953-09-3. Composition: Amides. Application: Thermosets & Composites, Printing Inks, Can, Coil and Industrial, Construction, Adhesives & Sealants. Function: Amino - Melamine - Urea Resins. Physical Form: Liquid. Product Code: PIM000003634. | Australia |
| ITAMID B | ITAMID B is a polyaminoamide resin of high viscosity. Group: Specialty chemicals, polymers, paints & coatings. CAS No. 68082-29-1. Composition: Fatty Acids. Application: Thermosets & Composites, Printing Inks, Can, Coil and Industrial, Construction, Adhesives & Sealants. Function: Amino - Melamine - Urea Resins. Physical Form: Liquid. Product Code: PIM000003635. | Australia |
| ITAMID B70X | ITAMID B70X is a polyaminoamide resin in solution of xylene widely used in epoxy formulates. Group: Specialty chemicals, polymers, paints & coatings. CAS No. 68082-29-1. Composition: Fatty Acids. Application: Thermosets & Composites, Printing Inks, Can, Coil and Industrial, Construction, Adhesives & Sealants. Function: Amino - Melamine - Urea Resins. Physical Form: Liquid. Product Code: PIM000003636. | Australia |
| ITAMID C | ITAMID C is a medium viscosity polyaminoamide resin. Group: Specialty chemicals, polymers, paints & coatings. CAS No. 68082-29-1. Composition: Fatty Acids. Application: Thermosets & Composites, Printing Inks, Can, Coil and Industrial, Construction, Adhesives & Sealants. Function: Amino - Melamine - Urea Resins. Physical Form: Liquid. Product Code: PIM000003637. | Australia |
Our database is helping our users find suppliers everyday.
