Find where to buy products from Australian suppliers, including: distributors, industrial manufacturers, bulk supplies and wholesalers of raw ingredients & finished goods.
Search for products or services, then visit the suppliers website for prices, SDS or more information. You can also view suppliers in NZ, UK or the USA.
| Product | Description | |
|---|---|---|
| Tin metal foil LR | Tin metal foil 100 gm. LABSUPPLY AUSTRALIA. Categories: Lab Supply Australia, Laboratory Reagents Grade. |  Sydney (NSW) |
| ADPA - Bore Water Dry Penetrating Acid. ADPA Concentrated inhibited dry acid with a penetrant. The penetrant speeds up acid penetration into formations and accumulations of scale & corrosive material on casings & screens. This dry acid in inhibited for more concentrated use and is safe to use on all metals, rubbers & plastics. | USED FOR: Cleaning bore screens, casings, the gravel pack and the water bearing formation of deposits of mineral scale (calcium carbonate is the most common). Particularly useful in conjunction with a mechanical clean out. Water bore production in sandstone & limestone formations or in highly calcareous sand and gravel can be increased by action of the acid in dissolving part of the formation, the acid dissolves carbonates into harmless carbon dioxide. FEATURES: The acid penetrates the hardest encrustations in bores, converting these deposits into soluble salts which are easily pumped out. Rapid attack rate removes calcium & magnesium scales and also kills annoying algae slime found in some bores; Excellent mud dispersing qualities. Controls Calcium and Magnesium scales. Sizes available: 20 litre - 205 Litre Drums. CHEMDREX CHEMICALS: Water Treatment Chemicals dedicated to finding solutions to the problems encountered by groundwater users. Bore Water Quality Solutions. Categories: Wells & Bore Water Treatment Products, Calcium Scale Remover, Water Bore Cleaning Chemicals, Well Drillers |  Nationwide |
| Able Ecosoak | ABLE ECOSOAK & STRIP requires no special heating or agitation and works like magic. For use in a SOAK BATH operation. It is a NON DANGEROUS, low VOC, industrial strength ENVIRONMENTALLY RESPONSIBLE soak tank paint stripper that effectively removes high performance, architectural & industrial paints & surface coatings. ABLE ECOSOAK & STRIP will successfully remove multiple coats of most oil-based coatings, water-based coatings, varnishes, acrylics, urethanes, polyurethanes, epoxies, inorganic zincs, elastomeric coatings and specialty marine coatings. This product is considered safe for use on most surfaces such as wood, brick, stone, concrete and metals. Pack Sizes: 20 Litres. Product ID: AC808. Chemicals By Industry, Automotive, Chemicals By Industry, Building & Construction, Chemicals By Industry, Marine, Chemicals By Industry, Mining, Chemicals By Industry, Workshop. |  Australia Wide |
| Ableform WB-Release Agent | ABLEFORM WB-RELEASE AGEN T is an environmentally responsible, non-hazardous, water-based concrete mould and formwork release agent. When applied to moulds or formwork the emulsion creates a physical inert barrier that dramatically reduces setting concretes ability to stick to the mould which assists users achieving a higher quality concrete finish with easier separation. ABLEFORM WB-RELEASE AGENT is an inert product that will not react with fresh concrete or rust your metal forms like some products can do. This product is suitable for use on most forms and moulds, use this product with confidence on both porous and non-porous forms made from wood, plastic, metal or foam. Pack Sizes: 5 Litre, 20 Litres. Product ID: WC1149. Chemicals By Industry, Brick & Concrete Cleaning, Chemicals By Industry, Building & Construction. | Australia Wide |
| Able Spatter-Guard | ABLE SPATTER GUARD is a highly effective water-based product used to help prevent MIG or STICK welding spatter from sticking to metal, welding tips, nozzles & metal equipment after being sprayed with this product. ABLE SPATTER GUARD is non-toxic and silicone free blue liquid. This product also contains an inbuilt corrosion inhibitor to help prevent flash rusting and keep your metal rust free for longer when storing. Use product as received. Apply to metal surface via a trigger spray ensuring a thin and uniform coat and weld as normal. There is no need to allow the surface to dry before starting to weld. This product can also be used to treat tips and welding nozzles to help stop welding spatter from adhering and also to protect nuts, bolts and mild steel from corrosion when in storage. Pack Sizes: 5 Litre, 20 Litres. Product ID: WC1082. Chemicals By Industry, Building & Construction, Chemicals By Industry, Mining, Chemicals By Industry, Workshop. | Australia Wide |
| A-C 316 | A-C 316 is a hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion resistance by lowering the coefficient of friction. In textiles, this can help improve sewability and fabric cutting, helping to extend cutting machine lifetime. Its acid number of 16 allows it to be emulsified into water. Can also provide heat resistance to hot melt adhesives (HMAs). In addition, may be used as a metal release agent for PVC processing and is a fusion control for PVC formulations. It will not affect clarity in transparent PVC applications. Very effective for use in processing PVC regrind. Group: Specialty chemicals, polymers. CAS No. 9002-88-4. Composition: OPE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.1~2%. Certification: REACH, Food Contact. Product Code: PIM000007937. |  Australia |
| A-C 392 | A-C 392 is hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion resistance by lowering the coefficient of friction. In textiles, can help improve sewability and fabric cutting, extending cutting machine lifetime. Its acid number of 30 allows it to be emulsified into water. Can also provide heat resistance to hot melt adhesives (HMAs). Additionally, it is an effective metal release agent for cellular PVC applications. Group: Specialty chemicals, polymers. CAS No. 68441-17-8. Composition: OPE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.3~0.5%. Certification: REACH. Product Code: PIM000007923. | Australia |
| A-C 405M | A-C 405M is an ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 8%, for use in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 24937-78-8. Composition: EVA WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Automotive Paints. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007909. | Australia |
| A-C 405T | A-C 405T is an ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 6%, for use in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 24937-78-8. Composition: EVA WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Automotive Paints. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007911. | Australia |
| A-C® 540 | A-C® 540 is an ethylene acrylic acid (EAA) copolymer in a prill form, with an acrylic acid (AA) content of 5%, for use in adhesives to promote adhesion to various substrates. It is also used in aqueous floor polishes to provide drag (raising the coefficient of friction) thereby controlling the final coefficient of friction. Its acid number of 40 aids emulsification. Also used in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. Group: Specialty chemicals, polymers. Composition: EVA WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007917. | Australia |
| A-C 540A | A-C 540A is an ethylene acrylic acid (EAA) copolymer in a powdered form, with an acrylic acid (AA) content of 5%, for use in adhesives to promote adhesion to various substrates. It is also used in aqueous floor polishes to provide drag (raising the coefficient of friction) thereby controlling the final coefficient of friction. Its acid number of 40 aids emulsification. Also used in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. Is a dispersing agent for color masterbatch in engineering resins. Excellent external lubricant for polyamide compounds. Group: Specialty chemicals, polymers. CAS No. 9010-77-9. Composition: PP-PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 2.0%. Certification: REACH. Product Code: PIM000007912. | Australia |
| AC-580 | A-C 580 ethylene acrylic acid (EAA) copolymer in a prill form, with an acrylic acid (AA) content of 10%, for use in adhesives to promote adhesion to various substrates. It is also used in aqueous floor polishes to provide drag (raising the coefficient of friction) thereby controlling the final coefficient of friction. Its acid number of 75 aids emulsification. Also used in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. Group: Specialty chemicals, polymers. CAS No. 9002-88-4. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.1~2%. Certification: REACH. Product Code: PIM000007931. | Australia |
| A-C 629 | A-C 629 is a low density Oxidized Polyethylene (LDOxPE) homopolymer in prill form for use in solvent borne coatings as a rheological aid. It also finds use as a metal release agent in PVC. It can also be atmospherically emulsified for use in aqueous applications, such as textiles, lubricants, coatings and inks, to lower the COF and provide surface properties such as mar & abrasion resistance and increased slip. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 68441-17-8. Composition: OPE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Others. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007914. | Australia |
| A-C® 629A | A-C® 629A is a Low density Oxidized Polyethylene (LDOxPE) homopolymer in prill form for use in solvent borne coatings as a rheological aid. It also finds use as a metal release agent in PVC. It is a pigment dispersing agent for color masterbatch. A-C® 629A can also be atmospherically emulsified for use in aqueous applications, such as textiles, lubricants, coatings and inks, to lower the COF and provide surface properties such as mar & abrasion resistance and increased slip. Group: Specialty chemicals, polymers. CAS No. 68441-17-8. Composition: Low Density Oxidized Polyethylene. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: Waxes, Dispersing Agents. Physical Form: Solid. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007905. | Australia |
| A-C 680 | A-C 680 is low density Oxidized Polyethylene (LDOxPE) homopolymer in prill form for use in solvent borne coatings as a rheological aid. It can also be atmospherically emulsified for use in aqueous applications, such as textiles, lubricants, coatings and inks, to lower the COF and provide surface properties such as mar &, abrasion resistance and increased slip. It can also be used as an anti transpirant coating to delay fruit spoilage allowing longer storage and transport times. It also finds use as a metal release agent in PVC. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 68441-17-8. Composition: OPE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Others. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 2.0%. Certification: REACH. Product Code: PIM000007927. | Australia |
| Acid Detergent - AC518X | ACID DETERGENT AC518X is for sale to POISONS LICENSE HOLDERS ONLY. This product is used for etching aluminum and steel boat hulls prior to painting by professional boat painter. Also used for brick cleaning and brightening aluminum & stainless steel. Removing surface rust, red dust and bore water stains. For inquiries or assistance in selecting the right form, please contact the Pharmaceutical Services Branch via email to poisons@health.wa.gov.au or call 9222 6883. Why do you need to etch metal on boat hulls before respraying. If metal is not etched correctly paint jobs will not last properly, always use a professional boat painter. Pack Sizes: 5 Litre, 20 Litres. Product ID: AC518X. Chemicals By Industry, Marine, Chemicals By Industry, Workshop. | Australia Wide |
| AH-2090BA | AH-2090BA is used as a hardener for two-component hardener. It features weather resistance and flexibility. Some of its applications are on heavy duty protective coating, wood, metal, plastic, synthetic leather, adhesive and film coating. Group: Specialty chemicals, paints & coatings. CAS No. 28182-81-2, 123-86-4, 822-06-0. Composition: 1,6-Diisocyanatohexane homopolymer, n-Butyl acetate, Hexamethylene Diisocyanate. Application: CanCoil and Industrial. Function: BINDERS, Polyisocyanates, ADDITIVES, Catalysts - Crosslinkers. Physical Form: Liquid. Certification: PICCS. Product Code: PIM000048238. | Australia |
| AH-4075PX | AH-4075PX is used as a hardener for two-component hardener. It features weather resistance and flexibility. Some of its applications are on heavy duty protective coating, wood, metal, plastic, synthetic leather, adhesive and film coating. Group: Specialty chemicals, paints & coatings. CAS No. 28182-81-2, 1330-20-7, 108-65-6, 822-06-0. Composition: 1,6-Diisocyanatohexane homopolymer, Xylene, Propylene glycol methyl ether acetate, Hexamethylene Diisocyanate. Application: CanCoil and Industrial. Function: BINDERS, Polyisocyanates, ADDITIVES, Catalysts - Crosslinkers. Physical Form: Liquid. Certification: PICCS. Product Code: PIM000048237. | Australia |
| Alkaline Cleaning Powder | ALKALINE CLEANING POWDER is an off-white powder with a pine odour and is formulated to remove paint, carbon, oils, grease and other obstinate soils from copper and ferrous metal. Use via soak tank method. ALKALINE CLEANING POWDER should be mixed slowly into cold water. Agitate to make sure all product is thoroughly dissolved. The bath should be constructed of mild steel and have a drain at the bottom of the tank to make dislodging and draining easier. Alloys and amphoteric metals cannot be used in this bath as they will react and seriously impair the solution performance. ALKALINE CLEANING POWDER should be used at 100gms per litre of water at 80 °C if possible. Parts should be immersed the solution and agitated if an agitator is fitted to the bath. Parts should be rinsed with water to flush away residual product after removing from the bath. Use 100 to 200gms of the product to a litre of water if a cold and still bath is necessary. NOTE: Plan the bath to completely immerse the parts that need cleaning. The bath can be used repeatedly until it is completely attenuated. Pack Sizes: 10KG. Product ID: AC637. Chemicals By Industry, Workshop. | Australia Wide |
| Alkaline Decarboniser Powder | ALKALINE DECARBONISER POWDER is an off-white, heavy duty powder concentrate formulated to remove carbon, oils, fats, greases, paint and other obstinate soils from stainless steel, ferrous metals, fibre reinforced plastic, EPD, LDPE, HDPE AND copper. Use via soak tank method. Pack Sizes: 5KG, 20KG, 25KG Bag. Product ID: AC639. Chemicals By Industry, Automotive, Chemicals By Industry, Mining, Chemicals By Industry, Workshop. | Australia Wide |
| Aqua Guard Corrosion Inhibitor | AQUA GUARD CORROSION INHIBITOR is a water based immersion or contact inhibitor for the temporary corrosion inhibiting of both FERROUS & NON FERROUS metals. AQUA GUARD CORROSION INHIBITOR is a concentrate and should be diluted before use. This product is completely miscible with water and does not phase out with extreme fluctuations of temperature. The recommended dilution is 50mls of product made up to 950mls with clean soft water. In immersion tanks use above recommended dilution. Pack Sizes: 5 Litre, 20 Litres. Product ID: AC3991A. Chemicals By Industry, Workshop. | Australia Wide |
| AVANSAFE DETECTOR MB | AVANSAFE DETECTOR MB is a powerful MB designed to impart detectability, by metallic and magnetic systems, to different plastics. Imparting this property allows an easy detection of packaging, pens and bridles produced with this masterbatch, in food and beverages processing facilities. Therefore, this solution prevents contamination of undesired plastic materials in processed food. This product formula has been specially designed to be introduced in a polymeric base and generate a minimal effect to its mechanical properties. Additionally, its low required dosage allows any colour formulations and it ca be applied in injection, extrusion and rotational moulding processes. Group: Specialty chemicals, polymers. Composition: Masterbatch. Application: Masterbatch & Compounders. Function: ADDITIVESOther. Physical Form: Dispersion. Product Code: PIM000007248. | Australia |
| AXIDEW DLDG | AXIDEW DLDG is coconut diethanolamide derived from the condensation of diethanolamine and coconut oil. Axidew DLDG is an active ingredient in liquid detergents based on alkyl benzene sulphonic acid. Axidew DLDG acts as a foam stabiliser, versatile wetting agent and emulsifier, viscosity modifier and contributes to the overall detergency. In personal care application, Axidew DLDG may also be used as a foam booster and viscosity modifier in hair shampoos based on fatty alcohol ethoxysulphates or fatty alcohol sulphates. Application include degreasers, powdered laundry detergents, detergent sanitisers, metal cleaners and metal working fluids where lubrication and corrosion inhibition is of importance. Under cold conditions Axidew DLDG solidifies. Group: Personal care ingredients, cosmetics & toiletries, homecare & institutional cleaning. CAS No. 68603-42-9. Composition: Natural derived. Application: Hair Care, Fabric care, Dishwashing, Bath & Toilet Cleaner, Soap & Bath. Function: Stabilizer, Emulsifier. Physical Form: Liquid. INCI Name: Cocamide DEA. Product Code: PIM000014737. | Australia |
| BEROL 226 | Berol 226 is a degreaser, cleansing agent, wetting agent, based on an optimized surfactant blend intended for use in water based alkaline and acid cleaners ready to be formulated with builders and water. In cleaning application for all purpose cleaner, industrial cleaning, acid cleaning, carpet and upholstery cleaner, car wash, deck and floor cleaner, hard surface cleaning, metal cleaning, aircraft cleaner, vehicle cleaner, stain remover. Group: Personal care ingredients, homecare & institutional cleaning. CAS No. 68439-46-3, 61791-10-4. Composition: Synthetic. Application: Floor & Surface Cleaner, Car Care, Institutional Cleaner. Physical Form: Liquid. INCI Name: Alcohols, C9-11, ethoxylated & Quaternary ammonium compounds, coco alkylbis(hydroxyethyl)methyl, ethoxylated, chlorides. Product Code: PIM000037037. | Australia |
| BEROL 260 | BEROL 260 is a narrow range non-ionic surfactant based on a synthetic primary alcohol with >80% linearity. It is listed on CleanGredients and Safer Choice by Nouryon. BEROL 260 is a great degreaser, alkali stable, cleansing agent, emulsifier and wetting agent. BEROL 260 can offer a wide range of applications including All Purpose Cleaner, Industrial Cleaning, Liquid Laundry Detergent, Car Wash, Hard Surface Cleaning, Metal cleaning, Aircraft Cleaner, Vehicle Cleaner. Group: Personal care ingredients, homecare & institutional cleaning. CAS No. 103818-93-5. Composition: Synthetic. Application: Laundry, Floor & Surface Cleaner, Institutional Cleaner, Car Care. Function: Emulsifier, Cleanser. Physical Form: Liquid. Product Code: PIM000041086. | Australia |
| BEROL 266 | BEROL 266 is a narrow range non-ionic surfactant based on a synthetic primary alcohol with >80% linearity. It is listed on CleanGredients and Safer Choice by Nouryon. BEROL 266 is a great degreaser, alkali stable, cleansing agent, emulsifier and wetting agent. BEROL 266 can offer a wide range of applications including All Purpose Cleaner, Industrial Cleaning, Liquid Laundry Detergent, Car Wash, Hard Surface Cleaning, Metal cleaning, Aircraft Cleaner, Vehicle Cleaner. Group: Personal care ingredients, homecare & institutional cleaning. CAS No. 103818-93-5. Composition: Synthetic. Application: Laundry, Floor & Surface Cleaner, Institutional Cleaner, Car Care. Function: Dispersing Agent. Physical Form: Liquid. Product Code: PIM000041087. | Australia |
| BEROL 609 | BEROL 609 is a nonionic surfactant designed for nonyl phenol 9 replacement. BEROL 609 is intended to be used as a direct drop-in for NP9 or NP10. It has similar surfactant properties, including cloud point equal to NP9, but comes with better handling characteristics (lower pour point and viscosity, dissolves much more quickly in cold water). This means you don't have to modify other components of existing formulations to maintain performance. BEROL 609 can be used as a degreaser and wetting agent in acid cleaning and metal cleaning applications. Group: Personal care ingredients, homecare & institutional cleaning. Composition: Synthetic. Application: Institutional Cleaner. Physical Form: Liquid. Product Code: PIM000041089. | Australia |
| Bubble Gum - Cleaner & Disinfectant | BUBBLE GUM is a neutral liquid designed for combined cleaning, sanitising and deodorising operations, while imparting a pleasant, sanitary aroma. BUBBLE GUM is designed for use in cars, hotels, motels, hospitals, homes, restaurants, clubs, schools and industrial areas. It can be used for hand wiping, mopping and deodorising applications on a wide variety of surfaces such as floors, walls, ceilings, painted and varnished surfaces, metal and plastic surfaces, washrooms, toilets etc. For normal cleaning and disinfecting duties dilute 10 ml of BUBBLE GUM per litre of water. (This concentration may be increased for extra heavy soil). Mop, swab, wipe or spray this solution into surfaces. For food contact surfaces rinse with potable water afterwards. Pack Sizes: 5 Litre, 20 Litres. Product ID: WC1201. Chemicals By Industry, Janitorial & Maintenance. | Australia Wide |
| CAB-O-SIL® & CAB-O-SPERSE® | Due to their unique particle characteristics, our hydrophilic fumed silicas provide superior performance benefits for many types of applications, including: Adhesives and sealants, agriculture and lawn care, Chemical mechanical planarization, Coatings, Composites, Food additives, Greases, Pharmaceuticals, Printing and packaging, Silicone sealants, Skin and beauty care products. Uses: We offer a wide portfolio of fumed metal oxide products to meet your performance requirements. Our CAB-O-SIL® fumed silicas are powders that are available with either hydrophobic or hydrophilic surfaces. The versatility of our CAB-O-SIL fumed silicas is due to key product attributes, such as high surface area, surface chemistry, aggregated structure and purity, all of which lead to excellent performance. Group: Fumed Metal Oxides. CAS No. 112945-52-5. Pack Sizes: Loadability Varies. Product ID: CSL. |  |
| CELLIGENT® | Acts as an anti-aging, antioxidant and protective active. The active ingredient complex has been especially developed for treating UV-stressed skin. It is free from preservatives, GMOs, BSE, CMR, pesticides, mineral oils and heavy metals. The composition of carnosolic acid and ethyl ferulate neutralizes the free radicals which damage skin cells thus effectively preventing the occurrence of UV damage. The uridine monophosphate component, one of the pre-cursors to DNA synthesis, also supports the cells in repairing their DNA. It is suitable for after sun rescue treatment. Used in anti-age products, skin care products for sun protection, after-sun products. Suitable for o/w and w/o emulsions and gels. Uses: Sun care (Sun protection, After-sun, Self-tanning); Creams, Lotions, Gels, Anti-Ageing preparations; Skin care (Facial care, Facial cleansing, Body care, Baby care). Group: Raw Materials; Protective Agents; Regenerating; Revitalizing Agents; Anti-Aging Agents; Antioxidants. Alternative Name: Helianthus Annuus Seed Oil, Ethyl Ferulate, Rosmarinus Officinalis Leaf Extract, Tocopherol. Grade: Cosmetics. CAS Number: 8001-21-6, 4046-02-0, 84604-14-8, 54-28-4. Pack Sizes: 50g, 100g, 250g, 500 grams, 1kg. |  Australia & Worldwide |
| Chlormatic - Machine Dish Powder | CHLORMATIC is suitable for all types of commercial and household dishwashers in both soft and hard water. This premium grade product is especially suitable for use in hard water areas, where scale and stain control is of upmost importance. CHLORMATIC is specifically designed for machine dishwashing and effective stain control in all machine cleaning operations involving dinnerware, glassware, silver and stainless steel cutlery. It is preferable not to mix silver, stainless steel and aluminium in one wash operation, as soft metals could be attached by electrolytic action caused by dissimilar metals in solution. Do not allow prolonged contact with aluminium and other soft metals if pitting and discolouration are to be avoided. Concentration is varied according to water conditions, temperature and type of machine, but normally 1-2 grams per Litre of water in the wash tank is sufficient at wash temperature 60-70oC. Wash solution can be prepared, manually, by filling the dishwasher with fresh water and adding the required amount of CHLORMATIC. Mix the product into solution completely by running the machine. Pack Sizes: 5KG, 10KG, 20KG. Product ID: WC330. Chemicals By Industry, Kitchen. | Australia Wide |
| Chromic Acid | Chromic acid, also referred to as Chromium Trioxide, is primarily used in the hard chrome plating and metal treatment industries. Grades: Flake and Solution. Pack Sizes: MOQ is 1 pallet/1mt - We don't supply in a small quantities. Norkem your first link in the chemical chain. |  Australia |
| CHROMIUM OXIDE 99% | CHROMIUM OXIDE 99% is mainly used in smelting metallic chromium and chromium carbide, producing ceramic, grinding, polishing, coating, printing ink etc. Group: Specialty chemicals, paints & coatings. CAS No. 1308-38-9. Composition: Chromium Oxide. Application: Architectural and Deco. Function: PIGMENTSOther. Physical Form: Micronized Powder. Product Code: PIM000075226. | Australia |
| COOLTECH | LONG LIFE ANTIFREEZE ANTIBOIL. DESCRIPTION. COOLTECH was designed to generally exceed the broad range of national, international and OEM standards so workshops can SAVE MONEY by having one coolant to do a wide range of vehicles. (Ref Standards list) Cooltech is recommended for all general aftermarket servicing of the trucking, mining, transport and general automotive industries. Mixing ratio 2:1. COOLTECH has a maximum service life of 4 years, 1,000,000km, 12000 hours or whichever comes first in a well maintained engine cooling circuit at 50% v/v. Chemsol advises against indiscriminate mixing of different coolant formulations. Mixing different coolants may cause precipitation of inhibitor components and potentially result in overheating and reduced corrosion protection. COOLTECH provides maximum antifreeze / anitboil protection and provides peak reliability and operation life of the water pump because it is silicate free. It also provides premium cavitation and liner pitting protection maximising protection of all metals commonly found in the engine cooling system. It contains 1010g/L of Mono ethylene Glycol. COOLTECH is a superior general-purpose coolant based on Organic Additive Technology (OAT), which is a selectively balanced mixture of organic additives. ... It is a formulation based on monoethylene glycol and is free of nitrite, phosphate and amine inhibitors. COOLTECH is produced as a green liquid. Bittering agents are deliberately added, to reduce the risk of accidental poisoning by ingestion. COOLTECH provides long life protection against scale, rust and residue build up. It allows maximum fuel economy by performing at the desired engine operation temperature. USE. COOLTECH should be used in conjunction with the recommendation by the vehicle manufacturer. In the absence of such guidance, it should be diluted with good quality water to give solutions in the concentrati |  Western Australia |
| Diamond No-Cut Resin Polish | DIAMOND NO-CUT POLISH is a great polish and sealant for all types of paintwork and colours. This product is best suited to new or moderately deteriorated paintwork, including metallic, clear coat and water-based finishes. The product contains carnauba wax for a hard and lasting shine. Wash and dry the paintwork using a quality car or truck wash to remove road grime and grit. In a shaded area out of direct sunlight, apply a 20-cent size (20mm) dab to cloth and apply to the paintwork in an overlapping circular pattern. Finish sections of panel work in straight lines to ensure even coverage. Increase the pressure over any marks, scratches or dull patches. Do not apply to unpainted rubber or plastic trim. Allow the residue to dry to a dull film and then buff by hand using a soft lint free cloth. Pack Sizes: 5 Litre. Product ID: SC401. Chemicals By Industry, Automotive. | Australia Wide |
| DISODIUM EDTA | Disodium EDTA may also be called EDTA, or ethylenediaminetetraacetic acid, and it is used in many personal care and consumer products. It is found in cosmetics, household cleaners and also in skin care and hair care products. Disodium EDTA has properties that preserve and stabilize solutions. It is purifies products especially when tap water or another type of questionable water source is used. Disodium EDTA is also used as a chelating agent which effectively removes metal ions in the water. It can also control the viscosity in solutions making skin care products easy to use and apply on to the skin. Uses: Hair care; Skin care; Household cleaning products. Group: Personal Care; Cosmetic Raw Materials; Stabilizers. Alternative Name: Disodium EDTA. Grade: Cosmetic Ingredients. CAS Number: 139-33-3. Pack Sizes: 1kg, 5 kgs, 10kg, 20kg. Similar to: Dissolvine NA-2-P (AkzoNobel Global Personal Care), Dissolvine NA-2 S (AkzoNobel Global Personal Care), Edeta BD (BASF Corporation), OriStar DEDTA (Orient Stars LLC), Protacide Na2 EDTA (Protameen Chemicals), Universene Na2 (Universal Preserv-A-Chem, Inc.), Versene NA (The Dow Chemical Company), Versene Na2 Crystals (The Dow Chemical Company). | Australia & Worldwide |
| DLC-Si69 DRY SILANE | Powder coating (promotes the adhesion of coating to metal, glass, ceramic, enhance water-resistance), thermoplastic and polymer modification (lowers the viscosity and provides better process function, enhances the strength of finished goods), rubber and e Main Uses: Coupling agent. Other Names: Bis[3- (Triethoxysilyl) propyl] tetrasulfide. Cas No. 40372-72-3. Chemical Category: Organosilanes. PACK SIZES AVAILABLE: 25kg Pack |  Australia Wide, offices in Sydney & Melbourne |
| DOWSIL 107F ADDITIVE | DOWSIL 107F ADDITIVE is a versatile silicone foam control additive with a high efficiency and good compatibility features. DOWSIL 107F ADDITIVE can performs at low dosages and provide improved corrosion and blister resistance in metal coatings. APEO Free and low VOC. DOWSIL 107F ADDITIVE is commonly used in waterborne paints, inks and coatings. Group: Specialty chemicals, paints & coatings. Composition: Mixture. Application: Can, Coil and Industrial, Can, Coil and Industrial, Lamination and Converting, Automotive Paints, Printing Inks. Function: ADDITIVES, Other. Physical Form: Liquid. Product Code: PIM000043033. | Australia |
| DOWSIL 20 RELEASE COATING | DOWSIL 20 RELEASE COATING is a silicone release emulsion designed to simplify the production of molded plastic parts. Use DOWSIL 20 RELEASE COATING as a parting agent for epoxies, melamine, methacrylate, phenolics, polyesters, and polyurethanes. Its also ideal for releasing silicone glass laminates and tubes and parts made from silicone moulding compounds, as well as wood forming operations, metal making, and rubber extrusion. DOWSIL 20 RELEASE COATING is easy to use and does not discolor moulded parts. In most cases, a single application provides release through numerous moulding cycles. DOWSIL 20 RELEASE COATING provides heat stable, non-carbonizing, non-oily parting film with minimum build-up on moulds and dies. Group: Personal care ingredients, homecare & institutional cleaning. CAS No. 8052-41-3, 1330-20-7, 100-41-4, 25551-13-7, 25550-14-5, 107-46-0, 111-84-2. Composition: Synthetic. Application: Institutional Cleaner, Floor & Surface Cleaner. Physical Form: Liquid. Product Code: PIM000043081. | Australia |
| DOWSIL 402LS ADDITIVE | DOWSIL 402LS ADDITIVE is a silicone polyether based additive that has multi-functional benefits including improvements in leveling, slip, anti-blocking, and applied hiding. DOWSIL 402LS ADDITIVE is perfect for the application in Architectural, Industrial metal and wood, Inks and overprint varnish & Pigmented and clear formulations. Group: Specialty chemicals, paints & coatings. Composition: Silicone polyether. Application: Architectural and Deco., Printing Inks, Can, Coil and Industrial, Automotive Paints. Function: Surface Modifiers - Defoamers. Physical Form: Liquid. Recommended Dosage: 0.05-0.2%. Product Code: PIM000004120. | Australia |
| DOWSIL 61 NW ADDITIVE | DOWSIL 61 NW ADDITIVE is a silicone hammertone additive, appears in a clear, colourless liquid. DOWSIL 61 NW ADDITIVE displays a pleasing decorative appearance to poorly finished metal surface. DOWSIL 61 NW ADDITIVE is used in imparts a hammer tone finish effect for solvent based paints. Group: Specialty chemicals, paints & coatings. Composition: copolymer surfactant supplied at 100 percent active concentration. Application: Automotive Paints, Can, Coil and Industrial, Architectural and Deco., Printing Inks. Function: Surface Modifiers - Defoamers. Physical Form: Liquid. Recommended Dosage: 2% up. Product Code: PIM000004093. | Australia |
| DOWSIL 87 ADDITIVE | DOWSIL 87 ADDITIVE is a silane based additive made from 40% actives silane based emulsion. DOWSIL 87 ADDITIVE is compatible with acrylic resins & solvent and APEO free. DOWSIL 87 ADDITIVE is commonly used in waterborne acrylic formulations to improve water repellency and hydrophobing waterborne decorative coating, also being used in metal protective coatings (Acrylic, styrene acrylic, vinyl acrylics) with minimal effect on water vapor permeability and high dirt pickup resistance. Group: Specialty chemicals, paints & coatings. Composition: 40% Actives Silane Based Emulsion. Application: Architectural and Deco., Can, Coil and Industrial, Construction. Function: Water Repellents. Physical Form: Liquid. Recommended Dosage: 0.5-2%. Product Code: PIM000004099. | Australia |
| DOWSIL 906H ADDITIVE | DOWSIL 906H ADDITIVE act as an emulsion additive, appears in white liquid. DOWSIL 906H ADDITIVE offers the features and benefits in being a soventless binder emulsion and high in water repellency with low VOC formulations. DOWSIL 906H ADDITIVE is commonly used in protection of metal, wood and glass coating applications. Group: Specialty chemicals, paints & coatings. Composition: Waterbased Siloxane Emulsion. Application: Construction, Can, Coil and Industrial, Can, Coil and Industrial, Architectural and Deco. Function: ADDITIVES, Other. Physical Form: Liquid. Product Code: PIM000043039. | Australia |
| DOWSIL RSN-0805 RESIN | DOWSIL RSN-0805 Resin is intended for use primarily with metallic pigments in applications including maintenance paints, colored baking enamels and decorative finishes. DOWSIL RSN-0805 Resin can be used alone or blended with DOWSIL RSN-0806 Resin to increase film hardness. Group: Specialty chemicals, paints & coatings. CAS No. 1330-20-7, 100-41-4, 136-53-8, 108-88-3. Composition: Xylene, Ethylbenzene, Zinc bis(2-ethylhexanoate), Toluene, Octamethyl Cyclotetrasiloxane. Application: Architectural and Deco. Physical Form: Liquid. Product Code: PIM000031775. | Australia |
| EASTMAN 1.4-CHDA HP | EASTMAN 1.4-CHDA HP is a cycloaliphatic diacid offering many unique performance properties to polyester resins for coatings and fiberglass-reinforced plastics. It is also ideally suited to improving the performance of waterborne, high solids, powder coatings, and coil coating applications. EASTMAN 1.4-CHDA HP brings properties ideally suited for high-performance applications in automotive, transportation, industrial maintenance, aerospace, architecture, appliance, general metal coatings, and gel coats. CHDA is a mixture of cis and trans isomers. EASTMAN 1.4-CHDA HP offers the great benefits of reducing the orange peel in powder coatings, excellent thermal stability for low resin colour, high solubility in molten glycols & improved corrosion, stain, chemical, and detergent resistance. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 1076-97-7. Composition: 1, 4-Cyclohexanedicarboxylic acid. Application: Lamination and Converting, Powder Coating, Fibers, Textiles & Films, Fibers, Textiles & Films, Can, Coil and Industrial, Can, Coil and Industrial, Automotive Paints. Function: ADDITIVES, Other. Physical Form: Solid. Product Code: PIM000037710. | Australia |
| Electrical Safety Solvent | ELECTRICAL SAFETY SOLVENT is a concentrated solvent cleaner for degreasing electrical equipment, metal parts and pipework. This product is compatible with most plastics and elastomers and is formulated to clean and leave no residue which may cause electrical conductivity. This specialty cleaning product is a NON-CORROSIVE and NON-CONDUCTIVE and does not contain hydrofluorocarbon (HFCs). This product can be used to remove oils, grease, resins, cutting oils, gear oils, vacuum oils, waxes, mineral oils and a variety of other soils from most surfaces. Ideal for precision and specialty cleaning jobs like cleaning high value equipment, electrical components and circuit boards. Use as you would use a solvent cleaner. Apply to electrically isolated equipment that is at room temperature. Apply via spray pack, immersion/dipping tank or any other safe method and allow. The soil should dissolve into solution and be rinsed away by product. After cleaning allow components to air dry for maximum non - conductivity. Pack Sizes: 5 Litre, 20 Litres. Product ID: AC801. Chemicals By Industry, Workshop. | Australia Wide |
| Epoxy & Two Pack Stripper | EPOXY & TWO PACK STRIPPER - AC805 is a viscous mobile solvent gel formulated to remove carbon, rubber, resin, paint and varnish from bricks, stone and metal surfaces, including ferrous metals and alloys. This product has a limited shelf life on the gelling component. Apply a liberal amount of AC805 directly onto the surface with a paint brush. Allow 10-15 minutes contact time for the product to penetrate and soften the coating. Finally, clean the surface by scraping or hosing off with water. Dry the surface and apply as before. Pack Sizes: 5 Litre, 20 Litres. Product ID: AC805. Chemicals By Industry, Brick & Concrete Cleaning, Chemicals By Industry, Building & Construction, Chemicals By Industry, Marine. | Australia Wide |
| Fleet Clean Green - Degreaser | FLEET CLEAN GREEN Automotive Cleaner & Degreaser is a NON HAZADOUS, rust preventing, environmentally responsible concentrate. FLEET CLEAN GREEN can safely & efficiently remove road film, grease, oils, grime, wax, carbon deposits, ink dyes, gum, pencil, crayon marks, animal fats, vegetable soils and soap residues. FLEET CLEAN GREEN is suitable to use on most metal, glass, wood, vinyl, washable painted surfaces and plastics and is compatible with most carwash & foaming systems. General Cleaning: FLEET CLEAN GREEN can be foamed or brushed on at dilution ratios ranging from 1:10 to 1:100. For best results and improved economy use hot water with agitation. Degreasing: Apply neat with squirt bottle or paint brush. Allow 2 minutes to work then agitate and flush with water. For best results warm engine or object before degreasing. Pack Sizes: 5 Litre, 20 Litres, 205 Litre Drums, 1000 Litres. Product ID: WC480. Chemicals By Industry, Universal Products. | Australia Wide |
| Graffiti Remover & Paint Stripper | GRAFFITI REMOVER & PAINT STRIPPER - AC800 is a viscous mobile solvent gel formulated to remove carbon, rubber, resin, paint and varnish from bricks, stone and metal surfaces, including ferrous metals and alloys. Apply a liberal amount of AC800 directly onto the surface with a paint brush. Allow 10-15 minutes contact time for the product to penetrate and soften the coating. Finally, clean the surface by scraping or hosing off with water. Some stubborn coatings and residue films may require a second application of AC800. Dry the surface and apply as before. Pack Sizes: 5 Litre, 20 Litres, 205 Litre Drums. Product ID: AC800. Chemicals By Industry, Brick & Concrete Cleaning, Chemicals By Industry, Building & Construction. | Australia Wide |
| GREASE LIFTER | Solvent Based Degreaser. Description. This is a powerful blend of solvents and emulsifying surfactants designed for cleaning, dispersing and degreasing operations by soak, spray or brush application. It has the following features: Low flammability (high flash point). Safe on all metals. Will not damage paintwork when used as directed. Rinses off easily in cold water (even seawater). Rapidly dissolves most oils, greases, lubricants etc. Low evaporation rate. Low electrical conductivity. Contains no chlorinated solvents. Grease Lifter is ideal for general clean-up operations on engines, heavy machinery, compressors and workshop equipment, floors and driveways. It is suitable for cleaning bilges and tanks, and for treating oil spills on decks and piers. Grease Lifter is recommended as a pre-cleaning detergent prior to alkaline cleansing or decarbonising operations. It can also be used for dewaxing vehicles and spot cleaning and degreasing of painted surfaces, providing there is an immediate cold water rinse afterward. Use. For heavy soiling, apply by brush allowing Grease Lifter to penetrate for 1-2 minutes, then hose off with a strong jet of water. Safety. Grease Lifter contains hydrocarbon solvents. Read Material Safety Data Sheet before use. Prolonged exposure to the skin may remove natural fats and cause irritation. Avoid contact with eyes, and inhalation of spray mist. Uses: Industrial Products. Product ID: 544. Categories: Industrial Products. | Western Australia |
| GREEN CAVIAR EXTRACT | GREEN CAVIAR EXTRACT (Caulerpa lentillifera) is also called sea grape or green caviar due to its shape that is similar to grapes. Contains high amounts of essential amino acids and non-essential amino acids. Some of the amino acids (Glutamic acid, Proline, Glycine) act like collagen which promotes skin elasticity. Heavy metal chelating agent. Group: Personal care ingredients, cosmetics & toiletries. CAS No. 7732-18-5 107-88-0 122-99-6. Composition: Plant Extract. Application: Spa & Wellness, Soap & Bath, Baby Care, Skin Care. Physical Form: Liquid. Recommended Dosage: 0.5 -2.0%. INCI Name: Water/Butylene Glycol/Caulerpa lentillifera Extract. Product Code: PIM000003357. | Australia |
| Hydrochloric Acid 32% - AC591 | HYDROCHLORIC ACID 32% (HCL) is an industrial strength acid commonly used for the removal of scale, lime, calcium, oxides, efflorescence, bore stains, concrete dust and hard water deposits. NOTE: this is a higher grade hydrochloric acid than the "spent / recovered" type normally found at your local pool shop or hardware store. This product is generally used at concentration from 1:5 to 1:10 parts water depending on application. The product can be used via immersion, swab or recirculation techniques. The time taken to descale most items is approximately 5 to 10 minutes. Such a wide time span is given because results vary depending primarily on scale type and build up, dilution ratio and temperature. Once a surface has been cleaned always flush with copious amounts of water to removal all acid residues. TIPS: Before using the product ensure the surface has been pre-cleaned with appropriate cleaner to remove unwanted oil, grease and film. If the surface is porous (ie bore stain on brick wall) then the surface should be well wetted to avoid acid being wicked into the surface and creating a white haze in the days following, as minerals are leached to the surface. Once a surface has been cleaned the acid should be washed off as soon as possible with copious amounts of water. Repeated acid washing may damage some surfaces. This product may etch, lighten or alter the color of tile, grout, stone and metal surfaces. Allow all new grout, concrete, cement or masonry to cure per manufacturers specification before using. Pack Sizes: 5 Litre, 20 Litres, 200 Litre, 1000 Litres. Product ID: AC591. Chemicals By Industry, Brick & Concrete Cleaning, Chemicals By Industry, Building & Construction, Chemicals By Industry, Marine, Chemicals By Industry, Pools & Recreation. | Australia Wide |
| ITAMID WATER 511 | ITAMID WATER 511 is a polyamidoamine dispersion in water solution with a 50% solid content, developed to be cured with liquid epoxy resin or with epoxy resin emulsion/dispersion in water. The product has a lowersolid content compared to ITAMID WATER 512. Water-based anticorrosive coatings on metal. Flooring applications (concrete protection, primer for flooring, anti-slip layer etc). Group: Specialty chemicals, polymers, paints & coatings. Composition: Fatty Acids. Application: Thermosets & Composites, Printing Inks, Can, Coil and Industrial, Construction, Adhesives & Sealants. Function: Amino - Melamine - Urea Resins, ADDITIVES, Catalysts - Crosslinkers. Physical Form: Liquid. Product Code: PIM000003630. | Australia |
| ITAPOX 75 | ITAPOX 75X is a standard solid epoxy resin solution, containing 75% solid resin in xylene. Derived from bisphenol-A and epichlorohydrin, it boasts excellent compatibility with various curing agents like polyamides and polyamines. Widely used in applications such as anticorrosive coatings, marine coatings, and metal or concrete protection coatings, it offers versatile handling and easy solvent evaporation during coating applications, ensuring exceptional corrosion resistance. Group: Specialty chemicals, paints & coatings. CAS No. 25036-25-3. Composition: Standard Solid Epoxy Resin in Solvent. Application: CanCoil and Industrial. Function: BINDERSEpoxy Resins. Physical Form: Liquid. Product Code: PIM000088846. | Australia |
| LANOLUBE | LANOLUBE DESCRIPTION: Lanolube is a premium multifunctional lubricant and water proofing product that prevents corrosion and is non conductive. USE. Simply spray on to a clean dry surface and wait for solvent to evaporate before use. Can be used as a weld ant splatter, general lubrication all metal surfaces including wire rope, corrosion protection, coating for wood surfaces and canvas, thread anti-seize and battery terminal protection. SAFETY. Not classified as hazardous. Avoid inhalation of spray mist during use. Read Safety Data Sheet before use. Uses: Cleaning & Maintenance. Product ID: 502. Categories: Cleaning & Maintenance. | Western Australia |
| LeachWELL 60X | Cyanide leach accelerating agent. Uses: Cyanide-soluble gold assays. Alternative Names: Leachaid, Proleach. CAS No. 127-68-4, 10099-74-8. Pack Sizes: 1 kg, 10 kg. Minerals Process Control (MPC) Pty. Categories: LeachWELL, Leachaid, Proleach, LeachWELL GC, LeachWELL KC, Precious metals analysis. MPC also manufactures a range of gold assay equipment and consumables for cyanide-soluble gold assays. |  Landsdale WA |
| LeachWELL GC | Cyanide leach accelerating agent. Uses: Intense cyanidation of gold from concentrates. Alternative Names: Leachaid, Proleach. CAS No. 127-68-4, 10099-74-8. Pack Sizes: 1 kg, 10 kg, 35 kg. Minerals Process Control (MPC) Pty. Categories: LeachWELL, Leachaid, Proleach, LeachWELL 60X, LeachWELL KC, Precious metals analysis. MPC also manufactures a range of gold assay equipment and consumables for cyanide-soluble gold assays. | Landsdale WA |
| Liquiseal - Tyre Puncture Sealer | LIQUISEAL is a Non-Flammable solution designed to eliminate punctures and leaking tyre valves in Commercial and Recreational Tyres. Capable of sealing nail holes in car tyres with easy this product is ideal for inclusion in your vehicles. LIQUISEAL it is a safe and simple, puncture resistant sealant solution, used to combat the intrusion of such sharp and penetrating objects such as broken glass, nails, screws, metal objects, thereby eliminating the loss of tyre pressure through porous tyre casings, leaking valves, getting a slow puncture, or complete tyre deflation. Use as received. The LIQUISEAL is first pumped into the tyre's air cavity through its normal air inflation valve, where once all the air in that cavity has been replaced (Void-Free) by the tyre filling compound, is then taken up to the tyre's recommended operating pressure. When the liquid tyre filling compound is in a solid state, under the normal operating life of that tyre it will never leak, or go flat, despite any surface tread, or sidewall damage and intrusions. Pack Sizes: 20 Litres. Product ID: AC139. Chemicals By Industry, Automotive, Chemicals By Industry, Workshop. | Australia Wide |
| Lithium Carbonate | Lithium carbonate is a chemical compound of lithium, carbon, and oxygen. This colourless salt is widely used in the processing of metal oxides. Lithium carbonate is an important industrial chemical as it forms low-melting fluxes with silica and other materials. Glasses derived from lithium carbonate are useful in ovenware. Lithium carbonate is a common ingredient in both low-fire and high-fire ceramic glaze. Cement sets more rapidly when prepared with lithium carbonate, and is useful for tile adhesives. Pack Sizes: MOQ is 1 pallet/1mt - We don't supply in a small quantities. Norkem your first link in the chemical chain. | Australia |
| LUDOX® LITHIUM POLYSILICATE | Lithium Polysilicateis a companion grade to our colloidal silica line and was developed specifically for inorganic coating applications. Key Application are Architectural Emulsion (Latex) Paints and Parquet Hardcoats, Zinc-Rich Silicate Primers, Masonry Silicate Coatings, Anticorrosive Metal Pre-treatments and Electroplating/Galvanization. Group: Specialty chemicals, paints & coatings. Composition: Lithium Polysilicate. Application: Powder Coating. Physical Form: Liquid. Product Code: PIM000032184. | Australia |
| LUNA-CURE BMS | LUNA-CURE BMS is an efficient photoinitiator used in UV technology in various clear or pigmented coatings such as wood varnishes, printing inks and decorative metal can coatings. Group: Specialty chemicals, paints & coatings. CAS No. 83846-85-9. Application: Printing Inks, Architectural and Deco. Function: Photoinitiators. Physical Form: Solid. Product Code: PIM000051980. | Australia |
| LUNA-CURE PAG-002 | Luna-cure PAG-002 is a cationic photoinitiator, especially designed to ensure complete curing in high-thickness clear coatings, onto metal, plastic or paper substrates. Group: Specialty chemicals, paints & coatings. CAS No. 71449-78-0. Composition: Diphenyl(4-Phenylthio)Phenylsufonium Hexafluoroantimonate. Application: Printing Inks. Function: ADDITIVES, Photoinitiators. Physical Form: Micronized Powder. Product Code: PIM000038007. | Australia |
| LUNA-FLEX MP25-H | LUNA-FLEX MP25-H is a chlorinated binder that is used for the manufacture of physically drying coatings on iron and steel, non-ferrous metals, mineral substrates as well as road marking paints resistant to hydrolysis. It is a resin based on vinyl chloride and vinyl isobutyl ether copolymer. LUNA-FLEX MP25-H is resistant to hydrolysis, corrosion, and is compatible with a wide range of resins, and can therefore be used to formulate for anti-corrosion coatings, concrete coatings, road marking paints, flame-retardant coatings and marine and container paints. Group: Specialty chemicals, paints & coatings. CAS No. 25154-85-2. Composition: Vinyl Copolymer Resin. Application: Can, Coil and Industrial, Printing Inks. Function: Vinyl Resins. Physical Form: Micronized Powder. Certification: REACH. Product Code: PIM000071846. | Australia |
| LUNA-FLEX MP35-H | LUNA-FLEX MP35-H is a chlorinated binder that is used for the manufacture of physically drying coatings on iron and steel, non-ferrous metals, mineral substrates as well as road marking paints resistant to hydrolysis. It is a resin based on vinyl chloride and vinyl isobutyl ether copolymer. LUNA-FLEX MP35-H is resistant to hydrolysis, corrosion, and is compatible with a wide range of resins, and can therefore be used to formulate for anti-corrosion coatings, concrete coatings, road marking paints, flame-retardant coatings and marine and container paints. Group: Specialty chemicals, paints & coatings. CAS No. 25154-85-2. Composition: Vinyl Copolymer Resin. Application: Can, Coil and Industrial, Printing Inks. Function: Vinyl Resins. Physical Form: Micronized Powder. Certification: REACH. Product Code: PIM000071847. | Australia |
| LUNA-FLEX MP60-H | LUNA-FLEX MP60-H is a chlorinated binder that is used for the manufacture of physically drying coatings on iron and steel, non-ferrous metals, mineral substrates as well as road marking paints resistant to hydrolysis. It is a resin based on vinyl chloride and vinyl isobutyl ether copolymer. LUNA-FLEX MP60-H is resistant to hydrolysis, corrosion, and is compatible with a wide range of resins, and can therefore be used to formulate for anti-corrosion coatings, concrete coatings, road marking paints, flame-retardant coatings and marine and container paints. Group: Specialty chemicals, paints & coatings. CAS No. 25154-85-2. Composition: Vinyl Copolymer Resin. Application: Can, Coil and Industrial, Printing Inks. Function: Vinyl Resins. Physical Form: Micronized Powder. Certification: REACH. Product Code: PIM000071848. | Australia |
| MASCID 1810 | MASCID 1810 is STEARIC ACID RUBBER GRADE, and is derived from both Palm Oil and Palm Kernel Oil and is produced from the splitting of fats at high temperatures and pressure. STEARIC ACID RUBBER GRADE SA-1810 can be used in rubber processing, candles, and cosmetic products or used as feedstock to produce derivatives such as MCTs, soap, and metallic soap. Group: Personal care ingredients, cosmetics & toiletries, homecare & institutional cleaning. CAS No. 57-11-4. Composition: Derived Natural. Application: Soap & Bath, Color Care, Fragrance. Physical Form: Powder. INCI Name: STEARIC ACID. Product Code: PIM000037448. | Australia |
| MAYSYN S-122 | Synthetic fluid concentrate for grinding and medium-duty machining. Maysyn S-122 is an oil-rejecting synthetic coolant concentrate formulated for all types of metals and alloys, including cast iron, steels, stainless, and nonferrous materials. This coola Main Uses: Metalworking coolant. Other Names: Synthetic fluid concentrate. Cas No. Not Registered. Product Category: Metalworking Additives. PACK SIZES AVAILABLE: 218kg Drums | Australia Wide, offices in Sydney & Melbourne |
| MICOLIN PTSA 65 | MICOLIN PTSA 65 is made from Para-Toluenesulfonic acid, is a sulfonated toulene. MICOLIN PTSA 65 is suitable to use in metal fields, cutting fluids, catalyst for thermosetting resins, foundry applications and alkylation processes. Group: Specialty chemicals, electronic & specialties. Composition: Para-Toluenesulfonic acid. Application: Others. Function: ADDITIVES, Other. Physical Form: Liquid. Product Code: PIM000044722. | Australia |
| MicroSilver BG | MicroSilver BG is an innovative pure metallic silver powder consisting of highly porous and micro-sized particles of medical grade silver. MicroSilver BG is enriched in the skinfolds and close to the hair follicles, where typically the higher bacterial load is found. Its silver ions are released locally on top of the skin, where they prevent microbial growth in the vicinity. The result is a more sustainable skin protection by using a natural product. It is produced using a unique and purely physical production process with no added chemicals. Group: Personal care ingredients, cosmetics & toiletries. CAS No. 7440-22-4. Composition: Mineral. Application: Oral Care, Skin Care. Physical Form: Powder. INCI Name: Silver. Product Code: PIM000026351. | Australia |
| MIRACLE LUBE | ANTI-CORROSION LUBRICANT: Available in liquid or aerosol form. DESCRIPTION. This unique multipurpose product is designed to displace moisture, penetrate rusted parts, lubricate, stop squeaks, clean surfaces, and protect them from corrosion. It has numerous uses in automotive and marine maintenance, transport, engineering, industrial and commercial equipment. Miracle Lube is pH neutral, electrically non-conductive, non-corrosive, non-toxic, non-staining and non-flammable. It does not dry out, become sticky, or wash off with water, and contains no silicones, kerosene or acid forming ingredients. USE. Miracle Lube will not harm metals (including stainless steel, aluminium, copper, brass and ferrous alloys), plastic, enamel, laminex, fibreglass, painted surfaces, neoprene seals, electrical insulators, vinyl, etc. For normal use, just spray or brush Miracle Lube onto area to be treated. Items such as rusted nuts and bolts may be soaked for as long as is required. Miracle Lube also works effectively as a chain lubricant and a cutting oil for lathe work, milling, grinding, or honing of all metals. It maintains machine-finished surfaces moisture and corrosion free for long periods. SAFETY. Miracle Lube is not classified as hazardous. Read Material Safety Data Sheet before use. Avoid inhalation of spray mist during use. Pack Sizes: 1 litre and 5 litres. Product ID: 847. | Western Australia |
Our database is helping our users find suppliers everyday.
