Find where to buy products from Australian suppliers, including: distributors, industrial manufacturers, bulk supplies and wholesalers of raw ingredients & finished goods.
Search for products or services, then visit the suppliers website for prices, SDS or more information. You can also view suppliers in NZ, UK or the USA.
| Product | Description | |
|---|---|---|
| Aqua Guard Corrosion Inhibitor | AQUA GUARD CORROSION INHIBITOR is a water based immersion or contact inhibitor for the temporary corrosion inhibiting of both FERROUS & NON FERROUS metals. AQUA GUARD CORROSION INHIBITOR is a concentrate and should be diluted before use. This product is completely miscible with water and does not phase out with extreme fluctuations of temperature. The recommended dilution is 50mls of product made up to 950mls with clean soft water. In immersion tanks use above recommended dilution. Pack Sizes: 5 Litre, 20 Litres. Product ID: AC3991A. Chemicals By Industry, Workshop. |  Australia Wide |
| AVANDISS 232 | AVANDISS 232 is a powerful, halogen free and permanent antistatic for PS, HIPS, PE, PP, ABS, PC, PA. With a good stability under different humidity conditions. Non-toxic product ready to disperse in extrusion and injection process to give antistatic or anti-dust properties (107 to 1011. ohms). In applications like electronics, packaging, fitting, gasoline tanks, computer, Housing, TV and audio-visual devices among others. Group: Specialty chemicals, polymers. Composition: Antistatic agent. Application: Masterbatch & Compounders. Function: Antistatic additives. Physical Form: Dispersion. Product Code: PIM000007239. |  Australia |
| Beerline Cleaner & Cip | BEERLINE & CIP CLEANER is a red coloured CAUSTIC FREE heavy duty alkali solution containing low foaming surfactants & sequestering agents that efficiently cuts residue, fallout and build from beer-lines, tanks, vats and equipment into solution for efficient removal. BEERLINE CLEANING: Added to water at ~3-6mls per litre and draw into beer-lines before being allowed to soak for 5-10 minutes. Whilst soaking, agitation by gas injection will assist in loosening soil build-ups from line walls. Once soak time has occurred flush line thoroughly with water before reconnecting to the beer supply. This product is conveniently dyed RED so you can see the product in the lines or solution. Some stubborn lines may require chemical use at a higher concentration. TANK & VAT CIP CLEANING. Usage rates dependant on task. Kindly see your sales representative for application specific dilutions. Typical dilutions range from 0.2% to 4% w/w in warm water. Pack Sizes: 5 Litre, 20 Litres. Product ID: WC670. Chemicals By Industry, Brewing\, Distillery & Winery, Chemicals By Industry, Hospitality, Chemicals By Industry, Kitchen. | Australia Wide |
| CIP Cleaner | CIP CLEANER is a red coloured CAUSTIC FREE heavy-duty alkali solution containing low foaming surfactants & sequestering agents that efficiently cuts residue, fallout and build from beer-lines, tanks, vats and equipment into solution for efficient removal. Being CAUSTIC FREE this product is safer on a wider array of surfaces and materials like seals and gaskets. PROCESS LINE CLEANING: Added to water at ~3-6mls per litre and draw into beer-lines before being allowed to soak for 5-10 minutes. Whilst soaking, agitation by gas injection will assist in loosening soil buildups from line walls. Once soak time has occurred flush line thoroughly with water before reconnecting to the supply. This product is conveniently dyed RED so you can see the product in the lines or solution. Some stubborn lines may require chemical use at a higher concentration. TANK & VAT CIP CLEANING: Usage rates dependant on task. Kindly see your sales representative for application specific dilutions. Typical dilutions range from 0.2% to 4% w/w in warm water. Pack Sizes: 20 Litres. Product ID: WC680. Chemicals By Industry, Brewing\, Distillery & Winery. | Australia Wide |
| GREASE LIFTER | Solvent Based Degreaser. Description. This is a powerful blend of solvents and emulsifying surfactants designed for cleaning, dispersing and degreasing operations by soak, spray or brush application. It has the following features: Low flammability (high flash point). Safe on all metals. Will not damage paintwork when used as directed. Rinses off easily in cold water (even seawater). Rapidly dissolves most oils, greases, lubricants etc. Low evaporation rate. Low electrical conductivity. Contains no chlorinated solvents. Grease Lifter is ideal for general clean-up operations on engines, heavy machinery, compressors and workshop equipment, floors and driveways. It is suitable for cleaning bilges and tanks, and for treating oil spills on decks and piers. Grease Lifter is recommended as a pre-cleaning detergent prior to alkaline cleansing or decarbonising operations. It can also be used for dewaxing vehicles and spot cleaning and degreasing of painted surfaces, providing there is an immediate cold water rinse afterward. Use. For heavy soiling, apply by brush allowing Grease Lifter to penetrate for 1-2 minutes, then hose off with a strong jet of water. Safety. Grease Lifter contains hydrocarbon solvents. Read Material Safety Data Sheet before use. Prolonged exposure to the skin may remove natural fats and cause irritation. Avoid contact with eyes, and inhalation of spray mist. Uses: Industrial Products. Product ID: 544. Categories: Industrial Products. |  Western Australia |
| Hook & CIP Cleaner | HOOK & CIP CLEANER is a high alkaline surfactant based concentrate used for the efficient stripping of fats, protein, carbon, and miscellaneous organic build-up from steel and plastic in food processing areas. SOAK OR DIP TANKS (Hooks & Gambrels). Dilute: At the ratio of 1 part product to 10 parts water in soak bath. Can be used in cold bath but overall performs will be better if the bath is heated to 70-80C. TIP: As the contamination within the bath increases extra product will need to be periodically added to offset fat build-up. Excessive contamination will require a complete change of dilution bath.Once surface is clean flush clean with copious amounts of potable water. SMOKE HOUSES. Spray, Foam, Circulate or Brush on with hot water at ratio of 2% to 8% v/v. Agitate and allow 5 to 10 minutes dwell time. Once surface is clean flush clean with copious amounts of potable water. Pack Sizes: 5 Litre, 20 Litres, 205 Litre Drums. Product ID: WC650. Chemicals By Industry, Abattoir, Chemicals By Industry, Food & Beverage Processing. | Australia Wide |
| Marazyme BTC - Enzyme Cleaner | MARAZYME BTC Enzyme Cleaner is a cleaning agent used in septic systems, Aaerated Wastewater Treatment Systems (AWTS ), biological toilet systems, absorption trenches, grease traps & drains etc. This product contains bio active ingredients that eats fats, oils, grease and stains and has natural apple scent. Septic Systems / AWTS / Absorption Trenches: Add an initial prime of 4lt of MARAZYME BTC per septic tank via TOILETS AND DRAINS leading into the system. For systems with multiple tanks or tanks larger than 6,000lt consult your Technical representative for application rates. Continue with a maintenance program of 150ml of MARAZYME BTC per day per week. A minimum period of 3-4 months is required to restore absorption trenches. Grease Traps:.... Toilet, Washroom & General cleaning: Use as received daily as any normal toilet/urinal cleaner. Dilute 100ml MARAZYME BTC per 1lt water (1:10) for general cleaning of hard surfaces including ablutions block applications like, showers, sinks, basins, benches, walls and floors. Rinsing is recommended. For high pressure cleaning dilutions can be up to 1:50. DO NOT USE IN FOOD PREP AREAS WITHOUT RINSING AFTERWARD WITH POTABLE WATER. Odour Control: .... conditioning of ponds in poor condition consult your Technical representative for application rates based on pond capacity and effluent flow. For maximum benefit MARAZYME BTC CONCENTRATED dilutions are required. A healthy and efficient pond requires 1lt of MARAZYME BTC per 20,000 lt of effluent flow. If pH fluctuates outside the range of pH 6.5 to pH 8.5 consult your Technical representative. Landfills: Spray landfill sites daily with 1lt of MARAZYME BTC per 1,000 M2. Pack Sizes: 5 Litre, 20 Litres, 205 Litre Drums. Product ID: AC9311. Chemicals By Industry, Abattoir, Chemicals By Industry, Food & Beverage Processing, Chemicals By Industry, Kitchen, Chemicals By Industry, Marine, Chemicals By Industry, Mining. | Australia Wide |
| Phosclean Descaler | PHOSCLEAN is an AQIS compliant CIP acid cleaner specifically designed for the removal of scale, rust & precipitates from lines and equipment & tanks in food, beverage & dairy industries. RUST CONVERSION (Metal Priming & Preparation). Remove oil, grease & loose scale with a free rinsing water based alkaline degreaser such as PREDATOR, TRIPLE 2 or ... STAIN REMOVING & GENERAL CLEANING. Dilute up to 1:10 with warm water, however a dilution of 1:4 is recommended for most applications. Apply diluted PHOSCLEAN & allow a few minutes to work & then wipe or hose off. Do not allow to dry. Deeply encrusted stains may need further applications & some slight agitation with a brush or light sourer to promote penetration. Remember to keep the surface wet with product & do not allow to dry as process will halt. TIP: Always pre test an inconspicuous test area before tackling your job. CIP CLEANING. Pre wash using AQIS Alkaline Detergent such as AC222 or Hercules then flush. Then use PHOSCLEAN at a dilution to suit your requiremts (from neat to 1:100). TIP: Always allow up to 5 minutes of contact time to dissolve scale & precipitates. Always rinse food contact surfaces with potable water after use. Always pH adjust waste water to pH 7 with sodium hydroxide before release/ disposal. SITUATIONS TO AVOID IN USE. Avoid contact with Sodium Hypochlorite solutions (bleach), colorbond, anti-fouling paint, marble, anodised or galvanised surfaces & aluminium. Always pre test an inconspicuous test area before tackling your job. Pack Sizes: 5 Litre, 20 Litres, 205 Litre Drums. Product ID: WC861. Chemicals By Industry, Building & Construction, Chemicals By Industry, Food & Beverage Processing, Chemicals By Industry, Hospitality, Chemicals By Industry, Janitorial & Maintenance, Chemicals By Industry, Kitchen, Chemicals By Industry, Marine, Chemicals By Industry, Mining, Chemicals By Industry, Workshop. | Australia Wide |
| Sanvert - Rust Converter & Passivator | SANVERT is clear mobile liquid which when applied to rust or bore stains removes the rust and leaves a protective coating when rinsed off with fresh water (inhibited). SANVERT can be used for the removal of rust stains on fishing boats, ships, platforms, trailers, marine equipment, blending and mixing tanks, metal tools etc. SANVERT can also be used as a porcelain and tile cleaner to remove hard water scales. Spray neat directly onto affected areas. Apply with brush to more severely affected areas. Leave it on for 10 to 15 minutes. Wash off with pressure hose. SANVERT will quickly remove surface rust stains and convert the residual rust into a protective phosphate coating. Once the surface is dry, a primer and/or overcoat/s can be applied if required. Pack Sizes: 5 Litre, 20 Litres, 205 Litre Drums. Product ID: SC830. Chemicals By Industry, Marine, Chemicals By Industry, Workshop. | Australia Wide |
Our database is helping our users find suppliers everyday.
