Find where to buy products from Australian suppliers, including: distributors, industrial manufacturers, bulk supplies and wholesalers of raw ingredients & finished goods.
Search for products or services, then visit the suppliers website for prices, SDS or more information. You can also view suppliers in NZ, UK or the USA.
| Product | Description | |
|---|---|---|
| A-C® 1702 | A-C® 1702 is grease like, low temperature, completely amorphous, low density polyethylene (PE) homopolymer for use in solvent borne coatings, heat set, sheet fed solvent borne inks, and specialty digital and UV/EB inks to provide mar and rub resistance by lowering the coefficient of friction. Also used in lubricants to provide release. Will act as a plasticizer in paraffin based candles, especially large volume candles, to resist cracking. Group: Specialty chemicals, polymers. CAS No. 9002-88-4. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.1~2%. Certification: REACH. Product Code: PIM000007932. |  Australia |
| ACUMIST C-5 | ACUMIST C-5 is medium particle size micronized Polyethylene Homopolymer for use in solvent borne coatings and solvent based flexographic inks. As with all ACumist products, it is insoluble in solvents and UV based monomers and oligomers at room temperature. best suited goroffset inks, can coatings , and all thin film solvent based coatings. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 68441-17-8. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Adhesives & Sealants. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.5~1%. Certification: REACH. Product Code: PIM000007930. | Australia |
| ALTAOIL 1105 | ALTAOIL 1105 can be used as a high performing, stand-alone oil in biological OD formulations with microorganism safety, excellent formulation stability and built-in adjuvancy, such as rainfastness, hard water stability and increased spreading. Group: Specialty chemicals, electronic & specialties. Composition: Proprietary Mixture of Natural Oils. Application: Plant & Crop Protection. Function: Base Oils & Plasticizers. Physical Form: Liquid. Claim: Bio-Based, Biodegradable, Circularity, Renewable. Product Code: PIM000043005. | Australia |
| ALTAOIL 1120 | ALTAOIL 1120 can be used as a high performing, stand-alone oil in OD formulations for conventional active ingredients with excellent formulation stability and built-in adjuvancy, such as rainfastness, hard water stability and spreading. Group: Specialty chemicals, electronic & specialties. Composition: Proprietary Mixture of Natural Oils. Application: Plant & Crop Protection. Function: Base Oils & Plasticizers. Physical Form: Liquid. Claim: Bio-Based, Biodegradable, Circularity, Renewable. Product Code: PIM000043006. | Australia |
| ALTASOLV H | ALTASOLV H is recommended to be used as stand alone solvent or co-solvent for EC formulations.ALTASOLV?green agrochemical solvents provide high performance in challenging conditions, such as hard water and cold temperatures, while helping formulators reduce their carbon footprint. ALTASOLV improves formulations with additional adjuvant benefits offering rainfastness tailored to meet your formulation needs combined with additional anti-leaching and penetration properties. ALTASOLVs high compatibility with other solvents and surfactants provides flexibility, ease of handling and formulation robustness for customers. Group: Specialty chemicals, electronic & specialties. Composition: Proprietary Mixture of Green Organic Low VOC Solvents. Application: Plant & Crop Protection. Function: SOLVENTSOther. Physical Form: Liquid. Claim: Bio-Based, Biodegradable, Circularity, Renewable. Product Code: PIM000043007. | Australia |
| ALTASOLV L | ALTASOLV L is recommended to be used as stand alone solvent or co-solvent for EC formulations. ALTASOLV. green agrochemical solvents provide high performance in challenging conditions, such as hard water and cold temperatures, while helping formulators reduce their carbon footprint. ALTASOLV improves formulations with additional adjuvant benefits offering rainfastness tailored to meet your formulation needs combined with additional anti-leaching and penetration properties. ALTASOLVs high compatibility with other solvents and surfactants provides flexibility, ease of handling and formulation robustness for customers. Group: Specialty chemicals, electronic & specialties. Composition: Proprietary Mixture of Green Organic Low VOC Solvents. Application: Plant & Crop Protection. Function: SOLVENTSOther. Physical Form: Liquid. Claim: Circularity, Renewable, Bio-Based, Biodegradable. Product Code: PIM000043009. | Australia |
| ALTASOLV M | ALTASOLV M is recommended to be used as stand alone solvent or co-solvent for EC formulations. ALTASOLV green agrochemical solvents provide high performance in challenging conditions, such as hard water and cold temperatures, while helping formulators reduce their carbon footprint. ALTASOLV improves formulations with additional adjuvant benefits offering rainfastness tailored to meet your formulation needs combined with additional anti-leaching and penetration properties. ALTASOLVs high compatibility with other solvents and surfactants provides flexibility, ease of handling and formulation robustness for customers. Group: Specialty chemicals, electronic & specialties. Composition: Proprietary Mixture of Green Organic Low VOC Solvents. Application: Plant & Crop Protection. Function: SOLVENTSOther. Physical Form: Liquid. Claim: Bio-Based, Biodegradable, Circularity, Renewable. Product Code: PIM000043008. | Australia |
| APARPRENE® TPE 055 ANS | Aparprene® TPE-055 AN S is a 100% recyclable and UV stabilized, crosslinked polypropylene and ethylene propylene diene monomer vulcanizate (PP + EPDM TPV) grade. Aparprene® TPE-055 AN S offers high flow, thermal stability, weatherability, easy processing and colourability, shorter cycle times, lower energy consumption and a wide range of service temperatures -40°C to 120°C. Provides a soft and rubbery feel, good sealing flexibility performance and compression set like rubber. Exhibits resistance to ageing, ozone and chemical (acids, alkalis and alcohol). Designed for injection and extrusion methods. Aparprene® TPE-055 AN S is possibly used for appliances, automobiles, electrical, consumer goods, food, irrigation, health and personal care products, construction and mechanical rubber goods. Group: Specialty chemicals, polymers. CAS No. 104521-01-9, 9003-07-0, 99551-14-1, 1317-65-3. Composition: Styrene-ethylene-butylene Styrene-block Copolymer, Polypropylene, Calcium CarbonateMineral Oil. Application: Rubber & Elastomers, Thermoplastic Transformers. Function: POLYMERSOther. Physical Form: Solid. Product Code: PIM000055317. | Australia |
| ASH ESCALOL 557 | ASH ESCALOL 557 UV filter by Ashland Specialty Chemical acts as a UV filter. It shows broad UV-B absorbency profile. Group: Personal care ingredients, cosmetics & toiletries. CAS No. 5466-77-3. Composition: BUTYLATED HYDROXY TOLUENE. Application: Skin Care, Baby Care, Sun Care, Color Care. Function: Active. Physical Form: Liquid. Recommended Dosage: 2.0 - 7.5%. INCI Name: Ethylhexyl Methoxycinnamate (Octinoxate). Claim: UV Protection. Product Code: PIM000004799. | Australia |
| BIO MONOETHYLENE GLYCOL | As an alternative to conventional MEG made from fossil fuels, BIO MEG by INDIA GLYCOLS is renewable and sustainable. It complies with the stringent criteria required by polyester producers, including the required UV transmittance values, with a minimum purity of 99.5%. Group: Specialty chemicals, polymers. CAS No. 107-21-1. Composition: Biobased MEG. Application: Thermosets & Composites. Function: SOLVENTSOther. Physical Form: Liquid. Claim: Bio-Based. Product Code: PIM000086956. | Australia |
| CASPALINE 14 | CASPALINE 14 biofunctional by Ashland Specialty Chemical is a synthetic peptide designed to help enhance skins natural UV defenses and help fight the signs of aging. It boosts the expression of caspase-14 and filaggrin (the precursor of Natural Moisturizing Factor (NMF), an important component of supple, moisturized skin). It focuses on the skin's natural ability to minimize damage from UV exposure. By boosting caspase-14, which has been linked with cornifying epithelial tissue, such as the skin, and influencing terminal keratinocyte differentiation and formation of the skin's barrier function, Caspaline 14 may help limit skin damage from UV. Group: Personal care ingredients, cosmetics & toiletries. CAS No. 7732-18-5, 504-63-2, 26264-14-2. Composition: Amino Acid. Application: Skin Care. Function: Active. Physical Form: Liquid. Recommended Dosage: 0.5 - 1.5%. INCI Name: Water (and) Propanediol (and) Hexapeptide-42. Claim: Moisturizing, Anti-Aging. Product Code: PIM000004826. | Australia |
| CHRONOGEN | CHRONOGEN biofunctional by Ashland Specialty Chemical acts as an anti-stress agent, anti-aging agent and protective agent. Chronogen biofunctional helps preserve skin from UV damage during the day and helps optimize the protective and regenerative cycle of skin. Group: Personal care ingredients, cosmetics & toiletries. CAS No. 7732-18-5, 107-88-0. Composition: Organic Molecule. Application: Skin Care. Function: Active. Physical Form: Liquid. Recommended Dosage: 1.0%. INCI Name: Water (and) Glycerin (and) Hydrolyzed Yeast Protein. Claim: Anti-Stress, Anti-Aging. Product Code: PIM000004844. | Australia |
| CLARNATE® PC A1077 | CLARNATE® PC A1077 is a high viscosity polycarbonate pellets, UV stabilized. Group: Specialty chemicals, polymers. Composition: Polycarbonate. Application: Masterbatch & Compounders, Thermosets & Composites, Thermoplastic Transformers. Function: BINDERS, PC. Physical Form: Solid. Certification: REACH. Product Code: PIM000005635. | Australia |
| CLARNATE® PC HL6157 | CLARNATE® PC HL6157 is a medium viscosity polycarbonate pellets, UV stabilized. Group: Specialty chemicals, polymers. Composition: Polycarbonate. Application: Masterbatch & Compounders, Thermosets & Composites, Thermoplastic Transformers. Function: BINDERS, PC. Physical Form: Solid. Certification: REACH. Product Code: PIM000005639. | Australia |
| CURCYLIC 40 | Curcylic 40 by Vantage Specialty Ingredients acts as an anti-acne, anti-aging, repairing and exfoliating agent. It is clear, non-irritating, water-soluble and cold processable in nature. It does not form precipitation, crystallization or encapsulation and offers ease of use and handling. It reduces imperfections, hyper-pigmentation, photo-aging and appearance of previous breakouts. It removes dead skin cells, opens up pores and minimizes fine lines & wrinkles by restoring moisture. Moreover, it exfoliates, rejuvenates and restores the skin making it younger, smooth, radiant & glowing. It stimulates cell turn over and collagen & elastin (fibrillin) synthesis. Curcylic 40 finds application in formulating alcohol free products, bath & shower, hair care and skin care products. Meets the requirements of US Pharmacopeia/ National Formulary. Uses: Hair care (Shampoos, Conditioners, Styling) Skin care (Facial care, Facial cleansing, Body care, Baby care) Toiletries (Shower, Bath, Oral care). Group: Raw Materials; Anti-acne Agent; Anti-aging Agent. Alternative Name: Cocamidopropyl Dimethylamine, Salicylic Acid. Grade: Cosmetic Ingredients. CAS Number: 68140-01-2, 69-72-7. Pack Sizes: 100g, 250g, 500 grams, 1kg, 5 kgs, 10kg. |  Australia & Worldwide |
| CYASORB CYNERGY SOLUTIONS® L143-50X | CYASORB CYNERGY SOLUTIONS® L143-50X is a polymer additive, that appears to a light yellow to amber liquid. CYASORB CYNERGY SOLUTIONS® L143-50X offers the benefits in best-in-class UV performance in both 1K & 2K systems under the most common weathering conditions, ensures UV stabilization for high-performance applications offering cost savings & extremely low viscous single solution that reduces raw material complexity, allowing operative cost savings. CYASORB CYNERGY SOLUTIONS® L143-50X can be used in UV stabilization of clear coats and topcoats applications. Group: Specialty chemicals, paints & coatings, polymers. Composition: Amines. Application: Lamination and Converting, Can, Coil and Industrial, Thermoplastic Transformers. Function: UV Absorbers, Stabilisers. Physical Form: Liquid. Product Code: PIM000042663. | Australia |
| CYASORB THT® 4611 | CYASORB THT® 4611 is a polymer additives act as a light stabiliser, that appears off white to pale yellow pastilles. CYASORB THT® 4611 offers the benefits in delivers unmatched UV protection in polyolefins, Low loading provides exceptional outdoor durability, to UV20+, Low initial color contribution to resin, and gas fade resistant; exhibits minimal color shift on thermal storage and outdoor exposure, Non-blooming and low in volatility for better processing, Low dusting product form. CYASORB THT® 4611 is recommended to use in potoRotomolded, injection molded, and blow molded PE containers, tanks and leisure products, PE pipe, conduit and sheet, Polyamides and TPEs applications. Group: Specialty chemicals, polymers. Composition: Amines. Application: Thermoplastic Transformers. Function: UV Absorbers, Stabilisers. Physical Form: Solid. Product Code: PIM000042655. | Australia |
| CYASORB® UV-24 | CYASORB® UV-24 is polymer additives act as a light stabiliser, that appears in an off white to yellow free flowing powder. CYASORB® UV-24 offers the benefits in strong and broad UV absorption and excellent compatibility with polymer. CYASORB® UV-24 is recommended polyesters, PVC, PUR, adhesives, coatings applications. Group: Specialty chemicals, polymers. Composition: 2,2-Dihydroxy-4-methoxybenzophenone. Application: Thermoplastic Transformers. Function: UV Absorbers, Stabilisers. Physical Form: Solid. Product Code: PIM000042656. | Australia |
| CYASORB® UV-3346 | CYASORB® UV-3346 is a polymer additive, that appears in a off white pastille. CYASORB® UV-3346 offers the benefits in oligomeric HALS for UV and long term thermal protection of most polymers, very low in volatility, excellent compatibility with most polymers & extraction resistant. CYASORB® UV-3346 is suitable to use in Polyolefins, Polyamides, Styrenics, Polyesters, PVC, Polyurethanes applications. Please see the specification sheet below and for further details contact our local sales representative today. Group: Specialty chemicals, polymers. Composition: Hindered Amine Light Stabilizer. Application: Thermoplastic Transformers. Function: UV Absorbers, POLYMERS, Polyolefins. Physical Form: Solid. Product Code: PIM000042658. | Australia |
| CYASORB® UV-3529 | CYASORB® UV-3529 is a polymer additive, that appears in a off white pastille. CYASORB® UV-3529 offers the benfits for oligomeric HALS for long term UV and thermal protection of polymers, lower inter-reactivity with fillers, pigments and other additives (3° amine), low color contribution and highly resistant to discoloration and gas fading & very low in volatility and compatible with most polymers. CYASORB® UV-3529 is suitable to use in Polyolefins, Polyamides, Styrenics, Polyesters, PVC, Acrylics & Polyurethanes applications. Please see the specification sheet below and for further details contact our local sales representative today. Group: Specialty chemicals, polymers. Composition: Hindered Amine Light Stabilizer. Application: Rubber & Elastomers, Thermoplastic Transformers. Function: UV Absorbers, POLYMERS, Polyolefins. Physical Form: Solid. Product Code: PIM000042659. | Australia |
| DOWSIL 163 ADDITIVE | DOWSIL 163 ADDITIVE is a made from a silicone antifoam compound and low-viscosity. DOWSIL. 163 ADDITIVE act as a foam control additive for solvent-based and UV coatings and solvent-based and water-based inks. Group: Specialty chemicals, paints & coatings. Composition: 100% Silicone antifoam compound. Application: Automotive Paints, Can, Coil and Industrial, Architectural and Deco., Printing Inks. Function: Surface Modifiers - Defoamers. Physical Form: Liquid. Recommended Dosage: 0.05-1%. Regulatory requirements: Acceptable for food contact use under FDA Regulations 21 CFR 175.105, 175.300, 176.170, 176.180, 176.200, and 176.210. Product Code: PIM000004110. | Australia |
| DOWSIL 8526 ADDITIVE | DOWSIL 8526 ADDITIVE function as a silicone glycol surfactant made from carbinol functional silicone polyether copolymer. DOWSIL 8526 ADDITIVE delivers the benefits of being highly effective leveling and slip additive, provding a great recoatability. More importantly effective at low addition level and excellent compatibility. DOWSIL 8526 ADDITIVE is most commonly used in waterborne coating, solvent-based coating and UV curable coating. Group: Specialty chemicals, paints & coatings. Composition: Mixture. Application: Construction, Can, Coil and Industrial, Can, Coil and Industrial, Architectural and Deco. Function: ADDITIVES, Other. Physical Form: Liquid. Product Code: PIM000043041. | Australia |
| DOWSIL Z-6689 | DOWSIL. Z-6689 is an active component for formulating penetrating water repellent treatments. DOWSIL. Z-6689 offers the benefits of being dilutable in organic solvent, produce a hydrophobic treatment, UV stable, excellent performance at low active solids levels & reduction in water absorption reduces cracking and spalling due to freeze-thaw and efflorescence, thereby increasing the life of the substrate and more. DOWSIL. Z-6689 is suitable to use on neutral and alkaline mineral substrates such as brick, sandstone, concrete and mortar that require water repellency. Group: Specialty chemicals, paints & coatings. Composition: Solvent-free silane/siloxane concentrate. Application: Construction. Function: Water Repellents. Physical Form: Liquid. Recommended Dosage: 5-15%. Product Code: PIM000004151. | Australia |
| EASTMAN CELLULOSE ACETATE BUTYRATE (CAB-551-0.01) | EASTMAN CELLULOSE ACETATE BUTYRATE (CAB-551-0.01) has many unique attributes that will serve useful across many different coating application areas. It has the lowest Tg (glass transition temperature) of the CAB portfolio. It also has the second lowest M(n), which helps its compatibility with other coatings components. It is compatible with numerous cross-linking resins and has a lower solution viscosity. In coatings, Eastman CAB-551-0.01 gives clear films, reduces surface tack and mottling, minimizes cratering, improves flow and thermal reflow, and provides inter coat adhesion and good UV stability. Its good compatibility with a wide range of curing resin systems and its solubility in a wide variety of solvents and solvent combinations make it useful as an additive in numerous coating compositions. When dissolved in appropriate solvents selected for CAB-551-0.01, a clear, colorless solution is produced. It is useful in lacquers for glass, plastic, wire and release coatings and is available in pellet form. Group: Specialty chemicals, polymers. Composition: Cellulose acetate butyrate. Application: Can, Coil and Industrial, Can, Coil and Industrial, Powder Coating, Adhesives & Sealants, Printing Inks. Function: SOLVENTS, Cosolvent. Physical Form: Nano powder. Product Code: PIM000039782. | Australia |
| EASTMAN CELLULOSE ACETATE BUTYRATE (CAB-551-0.2) | EASTMAN CELLULOSE ACETATE BUTYRATE (CAB-551-0.2) is a cellulose ester with high butyryl content and relatively low molecular weight. It is compatible with numerous cross-linking resins and has a lower solution viscosity. In coatings, Eastman CAB-551-0.2 gives clear films, reduces surface tack and mottling, minimizes cratering, improves flow and thermal reflow, and provides inter coat adhesion and good UV stability. It is useful for durable cross-linked formulations. Its good compatibility with a wide range of curing resin systems and its solubility in a wide variety of solvents and solvent combinations make it useful as an additive in numerous coating compositions. When CAB-551-0.2 is dissolved in appropriate solvents a clear, colorless solution is produced. Group: Specialty chemicals, polymers. Composition: Cellulose acetate butyrate. Application: Can, Coil and Industrial, Can, Coil and Industrial, Powder Coating, Adhesives & Sealants, Printing Inks. Function: SOLVENTS, Cosolvent. Physical Form: Nano powder. Product Code: PIM000039783. | Australia |
| EASTMAN CELLULOSE ACETATE PROPIONATE (CAP-504-0.2) | EASTMAN CELLULOSE ACETATE PROPIONATE (CAP-504-0.2) is a free-flowing powder having low odor, low color, and high hydroxyl content. It is fast dissolving, has good water tolerance and resistance to souring, and is compatible with many ink resins and solvents. It has good resistance to discoloration from UV light and has good adhesion to plastics. It has a low viscosity (0.2 seconds) and has an approximate propionyl content of 42.5 wt%. When CAP-504-0.2 is dissolved in appropriate solvents, a clear, colorless solution is produced. Eastman CAP-504-0.2 is based on cellulose, one of the most abundant natural renewable resources. The calculated approximate bio-content value of 49% for Eastman CAP-504-0.2 was determined by using six bio-based carbon atoms per anhyroglucose unit divided. Group: Specialty chemicals, polymers. Composition: Cellulose acetate propionate. Application: Can, Coil and Industrial, Can, Coil and Industrial, Powder Coating, Adhesives & Sealants, Printing Inks. Function: SOLVENTS, Cosolvent. Physical Form: Nano powder. Product Code: PIM000039784. | Australia |
| EDERLINE S | EDERLINE S biofunctional by Ashland Specialty Chemical acts as an anti-aging agent. It is an apple seed extract with clinically proven wrinkle reduction properties that helps to rejuvenate aged skin. It rapidly decreases skin wrinkles and hence increases collagen synthesis. Group: Personal care ingredients, cosmetics & toiletries. CAS No. 2425-77-6, 107-88-0, 85251-63-4. Composition: Organic Molecule. Application: Skin Care, Baby Care. Function: Active. Physical Form: Liquid. Recommended Dosage: 1% - 3%. Certification: Cosmos. INCI Name: Hexyldecanol (and) Butylene Glycol (and) Pyrus Malus (Apple) Seed Extra. Claim: Anti-Aging, Anti-Wrinkle, Organic, Natural. Product Code: PIM000004858. | Australia |
| ELIXIANCE | ELIXIANCE biofunctional by Ashland Specialty Chemical is a preservative-free, natural and sustainable Peruvian Schinus molle extract with anti-pollution, skin-purifying, and age-performing benefits. It is rich in phytoantioxidants, quercitrin and miquelianin. Group: Personal care ingredients, cosmetics & toiletries. CAS No. 94334-31-3, 504-63-2, 7732-18-5. Composition: Vegetal. Application: Skin Care, Baby Care. Function: Active. Physical Form: Liquid. Recommended Dosage: 1.0 - 1.5%. Certification: Cosmos. INCI Name: Propanediol (and) Water/Aqua (and) Schinus Molle Extract. Claim: Smoothing, Anti-Pollution, Anti-Wrinkle, Organic, Natural. Product Code: PIM000004859. | Australia |
| ESCALOL 507 | ESCALOL 507 UV filter by Ashland Specialty Chemical acts as a UV filter. It is a powerful oil-soluble UV-B absorber and offers protection against UV-B and UV-A radiation. It provides cost-effective performance and excellent safety profile. Group: Personal care ingredients, cosmetics & toiletries. CAS No. 21245-02-3. Composition: Organic Molecule. Application: Sun Care, Skin Care, Baby Care. Function: Active. Physical Form: Liquid. Recommended Dosage: 2.0 - 8.0%. INCI Name: Ethylhexyl Dimethyl PABA. Claim: UV Protection. Product Code: PIM000004860. | Australia |
| ESCALOL 557 | ESCALOL 557 UV filter by Ashland Specialty Chemical acts as a UV filter. It shows broad UV-B absorbency profile. Group: Personal care ingredients, cosmetics & toiletries. CAS No. 5466-77-3. Composition: Organic Molecule. Application: Sun Care, Skin Care, Baby Care. Function: Active. Physical Form: Liquid. Recommended Dosage: 2.0 - 7.5%. INCI Name: Ethylhexyl Methoxycinnamate. Claim: UV Protection. Product Code: PIM000004862. | Australia |
| ESCALOL HP | ESCALOL HP UV fi?lter by Ashland Specialty Chemical acts as a UV hair protectant. Substantive to hair, it protect the hair from chemical changes induced by the suns radiation and conditions hair, giving it body and manageability. It helps minimize tryptophan degradation and disulfide bond cleavage, which could lead to a loss in mechanical strength. It shows broad compatibility with raw materials. Group: Personal care ingredients, cosmetics & toiletries. CAS No. 156679-41-3. Composition: 1-Dodecanaminium, N-[3-[[4-(dimethylamino)benzoyl] amino]propyl]-N, N-dimethyl-, salt with 4-methylbenzenesulfonic acid (1:1). Application: Hair Care. Function: Conditioner. Physical Form: Powder. Recommended Dosage: 0.1 - 0.5%. INCI Name: Dimethylpabamidopropyl Laurdimonium Tosylate. Claim: Hair Radiance. Product Code: PIM000004865. | Australia |
| ESCALOL S | ESCALOL S UV Absorber by Ashland Specialty Chemical provides broad-spectrum UVB/UVA absorption. In particular, it provides photostable, effective, and long-lasting protection against UVA radiation. It can boost the performance and the stability of commonly used UV filters. Its synergies with other filters can offer higher sun protection factor (SPF) ratings for UVB radiation, or photostability for longer-lasting UVA protection. Exhibits excellent compatibility with cosmetic ingredients. It has been approved in most countries (except for the pending US approval) for use as a sunscreen active in a concentration of up to 10%. Group: Personal care ingredients, cosmetics & toiletries. CAS No. 187393-00-6. Composition: Organic Molecule. Application: Sun Care, Skin Care, Baby Care, Color Care. Function: Sun Filter. Physical Form: Powder. Recommended Dosage: 1.0 - 3.0%. INCI Name: Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine. Claim: UV Protection. Product Code: PIM000004866. | Australia |
| LACPER 4101 | LACPER 4101 is an aqueous oil modified polyurethane dispersion. It has good wetting ability on wood substrate, also has good film building, film clarity and wood warming effect. When used in water base 1K or 2K coatings, it shows very fast film hardness development, it also has good adhesion on different substrate such as PU/PE/UV/melamine. It has good stability and compa- tibility with ethanol and dyes when used in shading stain.The product contains no solvent,APEO and Organotin. Less than 1% TEA is used as neutralizing agent. Bactericide: CMIT:MIT=3:1 12 ppm, MIT: 100ppm. Group: Specialty chemicals, paints & coatings. Composition: Polyurethane. Application: Printing Inks, Architectural and Deco., Can, Coil and Industrial, Automotive Paints. Function: BINDERS, Polyurethan Dispersions. Physical Form: Dispersion. Certification: REACH. Product Code: PIM000007470. | Australia |
| LLDPE 6110 UV | 6110 UV is a LLDPE ground powder with a typical particle size of 90% <500 micron. 6110 UV meets the requirements AS 2070 for food contact. Group: Specialty chemicals, paints & coatings. CAS No. 9002-88-4. Composition: Polyethylene Powders. Application: CanCoil and Industrial. Function: ADDITIVESOther. Physical Form: Micronized Powder. Product Code: PIM000085216. | Australia |
| LOWILITE 62 | LOWILITE62 UV stabilizer has a low melting point and exhibits low interaction with co-additives, such as pigments. This HALS additive protects organic polymers from degradation caused by exposure to ultraviolet radiation.?. Group: Specialty chemicals, polymers. CAS No. 65447-77-0. Composition: Hindered Amine Light Stabilizers. Application: Masterbatch & Compounders. Function: ADDITIVESUV Absorbers. Physical Form: Micronized Powder. Product Code: PIM000086945. | Australia |
| LOWILITE 77 | LOWILITE 77 UV stabilizer is a highly effective light stabilizer belonging to the Hindered Amine Light Stabilizer (HALS) family of stabilizers. Group: Specialty chemicals, polymers. CAS No. 52829-07-9. Composition: Hindered Amine Light Stabilizer (HALS). Application: Masterbatch & Compounders. Function: ADDITIVESUV Absorbers. Physical Form: Micronized Powder. Product Code: PIM000086948. | Australia |
| LUNA ACMO | LUNA ACMO is a reactive diluent monomer for UV and EB curable inks and coatings. Group: Specialty chemicals, paints & coatings. CAS No. 5177-12-4. Composition: N-acrylol morpholine. Application: Printing Inks. Function: Photoinitiators. Physical Form: Liquid. Product Code: PIM000011144. | Australia |
| LUNA-CRYL 700-J | LUNA-CRYL 700-J is a glycidyl functional acrylic resin that can be used as a curing agent for saturated carboxyl polyesters having low acid values to produce exterior durable powder coatings. LUNA-CRYL 700-J can produce polyester-based, exterior or durable powder coatings, excellent UV corrosion resistance, overbake stability and good gloss stability. Group: Specialty chemicals, paints & coatings. Composition: Glycidyl functional acrylic resin. Application: Powder Coating. Function: Acrylic Resins. Physical Form: Solid. Product Code: PIM000051976. | Australia |
| LUNA-CURE 2-ITX | LUNA-CURE 2-ITX is a photoinitiator used in UV technology in wood coatings, inks (lithographic, screen and flexo) , composites, electronics and over-print varnishes. Group: Specialty chemicals, paints & coatings. CAS No. 5495-84-1. Application: Architectural and Deco., Printing Inks. Function: Photoinitiators. Physical Form: Solid. Product Code: PIM000052443. | Australia |
| LUNA-CURE 907 | LUNA-CURE 907 is a photoinitiator used in UV applications in lithographic inks, silkscreen inks, flexo inks, plastic coatings, composites, electronics, overprint varnishes and adhesives. Group: Specialty chemicals, paints & coatings. CAS No. 71868-10-5. Composition: 2-Methyl-1-[4-(Methylthio)Phenyl-2-Morpholino-Propane-1-One. Application: Printing Inks. Function: ADDITIVESPhotoinitiators. Physical Form: Micronized Powder. Product Code: PIM000049226. | Australia |
| LUNA-CURE BMS | LUNA-CURE BMS is an efficient photoinitiator used in UV technology in various clear or pigmented coatings such as wood varnishes, printing inks and decorative metal can coatings. Group: Specialty chemicals, paints & coatings. CAS No. 83846-85-9. Application: Printing Inks, Architectural and Deco. Function: Photoinitiators. Physical Form: Solid. Product Code: PIM000051980. | Australia |
| LUNA-FOS 168 | Luna FOS 168 is a solid phosphite antioxidant with excellent hydrolytic stability. Recommendcd for use in combination with amine/phenolic antioxidants, Lunafos 168 functions synergistically to retard oxidative degradation of most polymeric substances during polymerization, processing, and in end-use applications. For those polymers resistant to oxidation, Lunafos 168 can be used alone to maintain optimal color stability. Group: Specialty chemicals, paints & coatings. CAS No. 31570-04-4. Composition: Tris(2, 4-Di-Tert-Butylphenyl) Phosphite. Application: Can, Coil and Industrial, Powder Coating. Function: UV Absorbers, Antioxidants. Physical Form: Micronized Powder. Product Code: PIM000038015. | Australia |
| LUNA-MER HEMA-F | LUNA-MER HEMA-F is a readily-polymerisable liquid monomer, that can be used in UV printing applications, or in the manufacture of poly(HEMA) resins. Group: Specialty chemicals, polymers, paints & coatings. CAS No. 868-77-9. Composition: 2-Hydroxyethyl Methacrylate. Application: Polymer Producers, Can, Coil and Industrial, Can, Coil and Industrial. Function: BINDERS, Acrylic Resins. Physical Form: Liquid. Product Code: PIM000019698. | Australia |
| MICACEOUS IRON OXIDE | Micaceous Iron Oxide (MIO) Coatings contain micaceous iron oxide pigment that imparts outstanding durability and abrasion resistance. The micaceous iron oxide pigment particles interlock in the film to form a barrier against moisture ingress and improve resistance to degradation by UV light. Structures protected today with MIO paint systems include bridges, electric transmission towers, radio masts, railway gantries, cranes, building frameworks, gas holders, fuel tanks, chemical plants, storage tanks, pipework, harbour facilities and offshore platforms. Key Application: Dyes, Pigments, and Inks, Paint and Coating. Group: Specialty chemicals, paints & coatings. Composition: Micaceous Iron Oxide. Application: Printing Inks, Can, Coil and Industrial, Can, Coil and Industrial. Function: PIGMENTS, Dyes. Physical Form: Solid. Product Code: PIM000031791. | Australia |
| ORSIRTINE ISR | ORSIRTINE ISR biofunctional by Ashland Specialty Chemical acts as an anti-aging and protective agent. It helps promote long-term skin benefits and natural protection from environmental aggression. It decreases cell senescence & repair after UV and oxidative damage. Group: Personal care ingredients, cosmetics & toiletries. CAS No. 7732-18-5, 56-81-5, 90106-37-9. Composition: Vegetal Extract. Application: Skin Care, Baby Care. Function: Active. Physical Form: Liquid. Recommended Dosage: 1.0%. INCI Name: Water (and) Glycerin (and) Oryza Sativa (Rice) Extract. Claim: Anti-Aging. Product Code: PIM000004934. | Australia |
| PEBAX® 3533 SP 01 | PEBAX® 3533 SP 01 is Polyether block amide also is a thermoplastic elastomer made of flexible polyether and rigid polyamide. This SP grade has been developed to be heat and UV resistant. Its key application are Flexible injected parts, High performance power transmission belts, Silent gears and Toy component. Group: Specialty chemicals, polymers. Composition: Polyether and rigid polyamide. Application: Thermoplastic Transformers. Function: ADDITIVES, Other. Physical Form: Solid. Product Code: PIM000031732. | Australia |
| PHYTOCOHESINE PSP | PHYTOCOHESINE PSP biofunctional by Ashland Specialty Chemical acts as an anti-aging, protecting, moisturizing and skin repairing agent. It visibly improves skin aspect by targeting stratum corneum cohesion, epidermal differentiation and skin barrier. It helps preserve skin from chemical and UV insults. It reinforces the skin barrier & improves hydration in normal and dry skin. It protects the skin moisture from UV and chemical aggression. Group: Personal care ingredients, cosmetics & toiletries. CAS No. 83-46-5. Composition: Amino Acid Derivative. Application: Sun Care, Skin Care, Baby Care. Function: Active. Physical Form: Liquid. Recommended Dosage: 0.1 - 1%. INCI Name: Sodium Beta-Sitosteryl Sulfate (and) Beta-Sitosterol. Claim: Moisturizing, Anti-Aging. Product Code: PIM000004939. | Australia |
| PLASTOLYN 290 HYDROCARBON RESIN | PLASTOLYN 290 HYDROCARBON RESIN is a versatile, aromatic, water-white, very high softening point resin for use in polymer modification, adhesives, overprint lacquers, coatings and a variety of other applications. Recommended as a flow modifier in such polymers as polyvinylchloride (PVC), acrylonitrile-butadiene-styrene (ABS) and styrenic block copolymers. Its water white color and good economy, combined with superior heat and ultraviolet light (UV) stability compared with conventional C9 hydrocarbon resins, provide formulators a new level of quality without sacrificing competitiveness. Group: Specialty chemicals, paints & coatings. Composition: Hydrocarbon polymer. Application: Powder Coating, Construction, Printing Inks, Can, Coil and Industrial, Can, Coil and Industrial, Adhesives & Sealants. Function: ADDITIVES, Adhesion Promoters, POLYMERS, Other. Physical Form: Solid. Product Code: PIM000039795. | Australia |
| PROTECTAGEN | PROTECTAGEN biofunctional by Ashland Specialty Chemical acts as a hair growth promoter and sunscreen agent. Protectagen is a rice extract found to boost proteins linked to stem cell functions ex-vivo to optimize hair growth cycle. This product may help preserve against harmful sun exposure, evidenced by the lower expression of P53 markers ex-vivo. Group: Personal care ingredients, cosmetics & toiletries. CAS No. 7732-18-5, 56-81-5, 156715-40-1. Composition: Vegetal Extract. Application: Hair Care, Skin Care. Function: Active. Physical Form: Liquid. Recommended Dosage: 0.5 - 1.0%. Certification: Cosmos. INCI Name: Aqua (and) Glycerin (and) Hydrolyzed Rice Protein. Claim: UV Protection, Organic, Natural. Product Code: PIM000004951. | Australia |
| RIA SORB ® UV 123 | RIASORB. ® UV 123 is a NOR type HALS (Hindered Amine Light Stabilizer) with low basicity. RIASORB ® UV 123 can effectively protects coatings from gloss reduction, cracking, blistering and. delamination. Especially recommended for coatings containing aggressive media such as acids, catalyst. residues. It is s uitable for high performance industrial coatings, automotive coatings. RIASORB ® UV 123. can be used in combinati on with UV absorber to obviously improve the weathering performance. Group: Specialty chemicals, paints & coatings. CAS No. 129757-67-1. Composition: Decanedioic acid, bis(2,2,6,6-tetramethyl-1-(octyloxy)-4-piperidinyl) esterreaction products with 1,1-dimethylethylhydro. Application: Architectural and Deco. Function: ADDITIVESUV Absorbers. Physical Form: Liquid. Product Code: PIM000082108. | Australia |
| RUVA-93 | RUVA-93 is a non migrating reactive ultraviolet absorber used mainly for high end, long-term exterior performance coatings used in/on polycarbonate plastics. Group: Specialty chemicals, polymers. CAS No. 96478-09-0. Composition: 2-(2' Hydroxy-5'-methacryloxyethylphenyl)-2H-benzotriazole. Application: CanCoil and Industrial. Function: Antioxidants & UV Absorbers. Physical Form: Micronized Powder. Product Code: PIM000007963. | Australia |
| Silaplane FM-0411P | Silaplane FM-04 series, including Silaplane FM-0411P with a Molecular Weight (Mn) of 1000, can react with urethane resins and polyesters to impart the excellent properties of silicone to various organic resins. As a result, Silaplane can be used as a raw material for polymers, filler dispersants, and surface treatment agents. Group: Specialty chemicals, electronic & specialties, paints & coatings, polymers. CAS No. 207308-30-3, 191920-47-5. Composition: Reactive silicone. Application: Adhesives & Sealants, Architectural and Deco., Automotive Paints, Construction, Electronic Chemicals, Fibers, Textiles & Films, Lamination and Converting, Masterbatch & Compounders, Polymer Producers, Powder Coating, Printing Inks, Rubber & Elastomers, Thermosets & Composites, Thermoplastic Transformers. Function: Adhesion Promoters, Anti-Graffiti, Antiscratch, Coupling Agents / Chain extenders, Dispersing Agents, Intermediates & Accelerators, Optical Materials, Other, Reagents, Rheology Modifiers, Semiconductor Materials, Surface Modifiers - Defoamers, Water Repellents, Acrylic Dispersions, Acrylic Emulsions, Acrylic Resins, Amino - Melamine - Urea Resins, Epoxy Resins, Phenolic Resins, Polyamide, Polyisocyanates, Polyurethane / Polyaspartics, Polyurethane Dispersions, Redispersable Powder, SBR Emulsions, Silane Terminated Polyethers, Silicone Resins, Styrene-Acrylic Dispersions, UV Binders and Oligomers, Vinyl Resins, Complex Inorganic Pigments, Functional Dyes, Iron Oxide, TiO2 (Titanium Dioxide), POLYMERS, Polymer Producers/Rheology modifier, SBR, Silicone Rubber, TPU, Raw Material for Electronics. Physical Form: Liquid. Recommended Dosage: 0.1-10% (Often in the range of 0.5-3%.). Certification: NDSL, ENCS. Product Code: PIM000088302. | Australia |
| Silaplane FM-0421 | Silaplane FM-04 series, including Silaplane FM-0421 with a Molecular Weight (Mn) of 5000, can react with urethane resins and polyesters to impart the excellent properties of silicone to various organic resins. As a result, Silaplane can be used as a raw material for polymers, filler dispersants, and surface treatment agents. Group: Specialty chemicals, electronic & specialties, paints & coatings, polymers. CAS No. 207308-30-3, 191920-47-5. Composition: Reactive silicone. Application: Adhesives & Sealants, Architectural and Deco., Automotive Paints, Construction, Electronic Chemicals, Fibers, Textiles & Films, Lamination and Converting, Masterbatch & Compounders, Polymer Producers, Powder Coating, Printing Inks, Rubber & Elastomers, Thermosets & Composites, Thermoplastic Transformers. Function: Adhesion Promoters, Anti-Graffiti, Antiscratch, Coupling Agents / Chain extenders, Dispersing Agents, Intermediates & Accelerators, Optical Materials, Other, Reagents, Rheology Modifiers, Semiconductor Materials, Surface Modifiers - Defoamers, Water Repellents, Acrylic Dispersions, Acrylic Emulsions, Acrylic Resins, Amino - Melamine - Urea Resins, Epoxy Resins, Phenolic Resins, Polyamide, Polyisocyanates, Polyurethane / Polyaspartics, Polyurethane Dispersions, Redispersable Powder, SBR Emulsions, Silane Terminated Polyethers, Silicone Resins, Styrene-Acrylic Dispersions, UV Binders and Oligomers, Vinyl Resins, Complex Inorganic Pigments, Functional Dyes, Iron Oxide, TiO3 (Titanium Dioxide), POLYMERS, Polymer Producers/Rheology modifier, SBR, Silicone Rubber, TPU, Raw Material for Electronics. Physical Form: Liquid. Recommended Dosage: 0.1-10% (Often in the range of 0.5-3%.). Certification: NDSL, ENCS. Product Code: PIM000088303. | Australia |
| Silaplane FM-0425 | Silaplane FM-04 series, including Silaplane FM-0425 with a Molecular Weight (Mn) of 10000, can react with urethane resins and polyesters to impart the excellent properties of silicone to various organic resins. As a result, Silaplane can be used as a raw material for polymers, filler dispersants, and surface treatment agents. Group: Specialty chemicals, electronic & specialties, paints & coatings, polymers. CAS No. 207308-30-3, 191920-47-5. Composition: Reactive silicone. Application: Adhesives & Sealants, Architectural and Deco., Automotive Paints, Construction, Electronic Chemicals, Fibers, Textiles & Films, Lamination and Converting, Masterbatch & Compounders, Polymer Producers, Powder Coating, Printing Inks, Rubber & Elastomers, Thermosets & Composites, Thermoplastic Transformers. Function: Adhesion Promoters, Anti-Graffiti, Antiscratch, Coupling Agents / Chain extenders, Dispersing Agents, Intermediates & Accelerators, Optical Materials, Other, Reagents, Rheology Modifiers, Semiconductor Materials, Surface Modifiers - Defoamers, Water Repellents, Acrylic Dispersions, Acrylic Emulsions, Acrylic Resins, Amino - Melamine - Urea Resins, Epoxy Resins, Phenolic Resins, Polyamide, Polyisocyanates, Polyurethane / Polyaspartics, Polyurethane Dispersions, Redispersable Powder, SBR Emulsions, Silane Terminated Polyethers, Silicone Resins, Styrene-Acrylic Dispersions, UV Binders and Oligomers, Vinyl Resins, Complex Inorganic Pigments, Functional Dyes, Iron Oxide, TiO4 (Titanium Dioxide), POLYMERS, Polymer Producers/Rheology modifier, SBR, Silicone Rubber, TPU, Raw Material for Electronics. Physical Form: Liquid. Recommended Dosage: 0.1-10% (Often in the range of 0.5-3%.). Certification: NDSL, ENCS. Product Code: PIM000088304. | Australia |
| Silaplane FM-0711 | Silaplane FM-07 series, including Silaplane FM-0711 with a Molecular Weight (Mn) of 1000, can react with Acrylic resins to impart the excellent properties of silicone to various organic resins. As a result, Silaplane can be used as a raw material for polymers. Group: Specialty chemicals, polymers, electronic & specialties, paints & coatings. CAS No. 146632-07-7. Composition: Reactive silicone. Application: Adhesives & Sealants, Architectural and Deco., Automotive Paints, Construction, Electronic Chemicals, Fibers, Textiles & Films, Lamination and Converting, Masterbatch & Compounders, Polymer Producers, Powder Coating, Printing Inks, Rubber & Elastomers, Thermosets & Composites, Thermoplastic Transformers. Function: Adhesion Promoters, Anti-Graffiti, Antiscratch, Coupling Agents / Chain extenders, Dispersing Agents, Intermediates & Accelerators, Optical Materials, Other, Reagents, Rheology Modifiers, Semiconductor Materials, Surface Modifiers - Defoamers, Water Repellents, Acrylic Dispersions, Acrylic Emulsions, Acrylic Resins, Amino - Melamine - Urea Resins, Epoxy Resins, Phenolic Resins, Polyamide, Polyisocyanates, Polyurethane / Polyaspartics, Polyurethane Dispersions, Redispersable Powder, SBR Emulsions, Silane Terminated Polyethers, Silicone Resins, Styrene-Acrylic Dispersions, UV Binders and Oligomers, Vinyl Resins, Complex Inorganic Pigments, Functional Dyes, Iron Oxide, TiO5 (Titanium Dioxide), POLYMERS, Polymer Producers/Rheology modifier, SBR, Silicone Rubber, TPU, Raw Material for Electronics. Physical Form: Liquid. Recommended Dosage: 0.1-10% (Often in the range of 0.5-3%.). Certification: ENCS. Product Code: PIM000056806. | Australia |
| Silaplane FM-0721 | Silaplane FM-07 series, including Silaplane FM-0721 with a Molecular Weight (Mn) of 5000, can react with Acrylic resins to impart the excellent properties of silicone to various organic resins. As a result, Silaplane can be used as a raw material for polymers. Group: Specialty chemicals, polymers, electronic & specialties, paints & coatings. CAS No. 146632-07-7. Composition: Reactive silicone. Application: Adhesives & Sealants, Architectural and Deco., Automotive Paints, Construction, Electronic Chemicals, Fibers, Textiles & Films, Lamination and Converting, Masterbatch & Compounders, Polymer Producers, Powder Coating, Printing Inks, Rubber & Elastomers, Thermosets & Composites, Thermoplastic Transformers. Function: Adhesion Promoters, Anti-Graffiti, Antiscratch, Coupling Agents / Chain extenders, Dispersing Agents, Intermediates & Accelerators, Optical Materials, Other, Reagents, Rheology Modifiers, Semiconductor Materials, Surface Modifiers - Defoamers, Water Repellents, Acrylic Dispersions, Acrylic Emulsions, Acrylic Resins, Amino - Melamine - Urea Resins, Epoxy Resins, Phenolic Resins, Polyamide, Polyisocyanates, Polyurethane / Polyaspartics, Polyurethane Dispersions, Redispersable Powder, SBR Emulsions, Silane Terminated Polyethers, Silicone Resins, Styrene-Acrylic Dispersions, UV Binders and Oligomers, Vinyl Resins, Complex Inorganic Pigments, Functional Dyes, Iron Oxide, TiO6 (Titanium Dioxide), POLYMERS, Polymer Producers/Rheology modifier, SBR, Silicone Rubber, TPU, Raw Material for Electronics. Physical Form: Liquid. Recommended Dosage: 0.1-10% (Often in the range of 0.5-3%.). Certification: ENCS. Product Code: PIM000005671. | Australia |
| Silaplane FM-0725 | Silaplane FM-07 series, including Silaplane FM-0725 with a Molecular Weight (Mn) of 10000, can react with Acrylic resins to impart the excellent properties of silicone to various organic resins. As a result, Silaplane can be used as a raw material for polymers. Group: Specialty chemicals, electronic & specialties, paints & coatings, polymers. CAS No. 146632-07-7. Composition: Reactive silicone. Application: Adhesives & Sealants, Architectural and Deco., Automotive Paints, Construction, Electronic Chemicals, Fibers, Textiles & Films, Lamination and Converting, Masterbatch & Compounders, Polymer Producers, Powder Coating, Printing Inks, Rubber & Elastomers, Thermosets & Composites, Thermoplastic Transformers. Function: Adhesion Promoters, Anti-Graffiti, Antiscratch, Coupling Agents / Chain extenders, Dispersing Agents, Intermediates & Accelerators, Optical Materials, Other, Reagents, Rheology Modifiers, Semiconductor Materials, Surface Modifiers - Defoamers, Water Repellents, Acrylic Dispersions, Acrylic Emulsions, Acrylic Resins, Amino - Melamine - Urea Resins, Epoxy Resins, Phenolic Resins, Polyamide, Polyisocyanates, Polyurethane / Polyaspartics, Polyurethane Dispersions, Redispersable Powder, SBR Emulsions, Silane Terminated Polyethers, Silicone Resins, Styrene-Acrylic Dispersions, UV Binders and Oligomers, Vinyl Resins, Complex Inorganic Pigments, Functional Dyes, Iron Oxide, TiO7 (Titanium Dioxide), POLYMERS, Polymer Producers/Rheology modifier, SBR, Silicone Rubber, TPU, Raw Material for Electronics. Physical Form: Liquid. Recommended Dosage: 0.1-10% (Often in the range of 0.5-3%.). Certification: ENCS. Product Code: PIM000088305. | Australia |
| Silaplane FM-7711 | Silaplane FM-77 series, including Silaplane FM-7711 with a Molecular Weight (Mn) of 1000, can react with Acrylic resins to impart the excellent properties of silicone to various organic resins. As a result, Silaplane can be used as a raw material for polymers. Group: Specialty chemicals, electronic & specialties, paints & coatings, polymers. CAS No. 58130-03-3, 804475-35-2. Composition: Reactive silicone. Application: Adhesives & Sealants, Architectural and Deco., Automotive Paints, Construction, Electronic Chemicals, Fibers, Textiles & Films, Lamination and Converting, Masterbatch & Compounders, Polymer Producers, Powder Coating, Printing Inks, Rubber & Elastomers, Thermosets & Composites, Thermoplastic Transformers. Function: Adhesion Promoters, Anti-Graffiti, Antiscratch, Coupling Agents / Chain extenders, Dispersing Agents, Intermediates & Accelerators, Optical Materials, Other, Reagents, Rheology Modifiers, Semiconductor Materials, Surface Modifiers - Defoamers, Water Repellents, Acrylic Dispersions, Acrylic Emulsions, Acrylic Resins, Amino - Melamine - Urea Resins, Epoxy Resins, Phenolic Resins, Polyamide, Polyisocyanates, Polyurethane / Polyaspartics, Polyurethane Dispersions, Redispersable Powder, SBR Emulsions, Silane Terminated Polyethers, Silicone Resins, Styrene-Acrylic Dispersions, UV Binders and Oligomers, Vinyl Resins, Complex Inorganic Pigments, Functional Dyes, Iron Oxide, TiO11 (Titanium Dioxide), POLYMERS, Polymer Producers/Rheology modifier, SBR, Silicone Rubber, TPU, Raw Material for Electronics. Physical Form: Liquid. Recommended Dosage: 0.1-10% (Often in the range of 0.5-3%.). Certification: ENCS. Product Code: PIM000088310. | Australia |
| Silaplane FM-7721 | Silaplane FM-77 series, including Silaplane FM-7721 with a Molecular Weight (Mn) of 5000, can react with Acrylic resins to impart the excellent properties of silicone to various organic resins. As a result, Silaplane can be used as a raw material for polymers. Group: Specialty chemicals, electronic & specialties, paints & coatings, polymers. CAS No. 58130-03-3, 804475-35-2. Composition: Reactive silicone. Application: Adhesives & Sealants, Architectural and Deco., Automotive Paints, Construction, Electronic Chemicals, Fibers, Textiles & Films, Lamination and Converting, Masterbatch & Compounders, Polymer Producers, Powder Coating, Printing Inks, Rubber & Elastomers, Thermosets & Composites, Thermoplastic Transformers. Function: Adhesion Promoters, Anti-Graffiti, Antiscratch, Coupling Agents / Chain extenders, Dispersing Agents, Intermediates & Accelerators, Optical Materials, Other, Reagents, Rheology Modifiers, Semiconductor Materials, Surface Modifiers - Defoamers, Water Repellents, Acrylic Dispersions, Acrylic Emulsions, Acrylic Resins, Amino - Melamine - Urea Resins, Epoxy Resins, Phenolic Resins, Polyamide, Polyisocyanates, Polyurethane / Polyaspartics, Polyurethane Dispersions, Redispersable Powder, SBR Emulsions, Silane Terminated Polyethers, Silicone Resins, Styrene-Acrylic Dispersions, UV Binders and Oligomers, Vinyl Resins, Complex Inorganic Pigments, Functional Dyes, Iron Oxide, TiO12 (Titanium Dioxide), POLYMERS, Polymer Producers/Rheology modifier, SBR, Silicone Rubber, TPU, Raw Material for Electronics. Physical Form: Liquid. Recommended Dosage: 0.1-10% (Often in the range of 0.5-3%.). Certification: ENCS. Product Code: PIM000088311. | Australia |
| Silaplane FM-DA11 | Silaplane FM-DA series, including Silaplane FM-DA11 with a Molecular Weight (Mn) of 1000, can react with urethane resins and polyesters to impart the excellent properties of silicone to various organic resins. As a result, Silaplane can be used as a raw material for polymers, filler dispersants, and surface treatment agents. Group: Specialty chemicals, electronic & specialties, paints & coatings, polymers. CAS No. 218131-11-4, 222416-18-4. Composition: Reactive silicone. Application: Adhesives & Sealants, Architectural and Deco., Automotive Paints, Construction, Electronic Chemicals, Fibers, Textiles & Films, Lamination and Converting, Masterbatch & Compounders, Polymer Producers, Powder Coating, Printing Inks, Rubber & Elastomers, Thermosets & Composites, Thermoplastic Transformers. Function: Adhesion Promoters, Anti-Graffiti, Antiscratch, Coupling Agents / Chain extenders, Dispersing Agents, Intermediates & Accelerators, Optical Materials, Other, Reagents, Rheology Modifiers, Semiconductor Materials, Surface Modifiers - Defoamers, Water Repellents, Acrylic Dispersions, Acrylic Emulsions, Acrylic Resins, Amino - Melamine - Urea Resins, Epoxy Resins, Phenolic Resins, Polyamide, Polyisocyanates, Polyurethane / Polyaspartics, Polyurethane Dispersions, Redispersable Powder, SBR Emulsions, Silane Terminated Polyethers, Silicone Resins, Styrene-Acrylic Dispersions, UV Binders and Oligomers, Vinyl Resins, Complex Inorganic Pigments, Functional Dyes, Iron Oxide, TiO8 (Titanium Dioxide), POLYMERS, Polymer Producers/Rheology modifier, SBR, Silicone Rubber, TPU, Raw Material for Electronics. Physical Form: Liquid. Recommended Dosage: 0.1-10% (Often in the range of 0.5-3%.). Product Code: PIM000088306. | Australia |
| Silaplane FM-DA21 | Silaplane FM-DA series, including Silaplane FM-DA21 with a Molecular Weight (Mn) of 5000, can react with urethane resins and polyesters to impart the excellent properties of silicone to various organic resins. As a result, Silaplane can be used as a raw material for polymers, filler dispersants, and surface treatment agents. Group: Specialty chemicals, electronic & specialties, paints & coatings, polymers. CAS No. 218131-11-4, 222416-18-4. Composition: Reactive silicone. Application: Adhesives & Sealants, Architectural and Deco., Automotive Paints, Construction, Electronic Chemicals, Fibers, Textiles & Films, Lamination and Converting, Masterbatch & Compounders, Polymer Producers, Powder Coating, Printing Inks, Rubber & Elastomers, Thermosets & Composites, Thermoplastic Transformers. Function: Adhesion Promoters, Anti-Graffiti, Antiscratch, Coupling Agents / Chain extenders, Dispersing Agents, Intermediates & Accelerators, Optical Materials, Other, Reagents, Rheology Modifiers, Semiconductor Materials, Surface Modifiers - Defoamers, Water Repellents, Acrylic Dispersions, Acrylic Emulsions, Acrylic Resins, Amino - Melamine - Urea Resins, Epoxy Resins, Phenolic Resins, Polyamide, Polyisocyanates, Polyurethane / Polyaspartics, Polyurethane Dispersions, Redispersable Powder, SBR Emulsions, Silane Terminated Polyethers, Silicone Resins, Styrene-Acrylic Dispersions, UV Binders and Oligomers, Vinyl Resins, Complex Inorganic Pigments, Functional Dyes, Iron Oxide, TiO9 (Titanium Dioxide), POLYMERS, Polymer Producers/Rheology modifier, SBR, Silicone Rubber, TPU, Raw Material for Electronics. Physical Form: Liquid. Recommended Dosage: 0.1-10% (Often in the range of 0.5-3%.). Certification: ENCS. Product Code: PIM000088308. | Australia |
| Silaplane FM-DA26 | Silaplane FM-DA series, including Silaplane FM-DA26 with a Molecular Weight (Mn) of 15000, can react with urethane resins and polyesters to impart the excellent properties of silicone to various organic resins. As a result, Silaplane can be used as a raw material for polymers, filler dispersants, and surface treatment agents. Group: Specialty chemicals, electronic & specialties, paints & coatings, polymers. CAS No. 218131-11-4. Composition: Reactive silicone. Application: Adhesives & Sealants, Architectural and Deco., Automotive Paints, Construction, Electronic Chemicals, Fibers, Textiles & Films, Lamination and Converting, Masterbatch & Compounders, Polymer Producers, Powder Coating, Printing Inks, Rubber & Elastomers, Thermosets & Composites, Thermoplastic Transformers. Function: Adhesion Promoters, Anti-Graffiti, Antiscratch, Coupling Agents / Chain extenders, Dispersing Agents, Intermediates & Accelerators, Optical Materials, Other, Reagents, Rheology Modifiers, Semiconductor Materials, Surface Modifiers - Defoamers, Water Repellents, Acrylic Dispersions, Acrylic Emulsions, Acrylic Resins, Amino - Melamine - Urea Resins, Epoxy Resins, Phenolic Resins, Polyamide, Polyisocyanates, Polyurethane / Polyaspartics, Polyurethane Dispersions, Redispersable Powder, SBR Emulsions, Silane Terminated Polyethers, Silicone Resins, Styrene-Acrylic Dispersions, UV Binders and Oligomers, Vinyl Resins, Complex Inorganic Pigments, Functional Dyes, Iron Oxide, TiO10 (Titanium Dioxide), POLYMERS, Polymer Producers/Rheology modifier, SBR, Silicone Rubber, TPU, Raw Material for Electronics. Physical Form: Liquid. Recommended Dosage: 0.1-10% (Often in the range of 0.5-3%.). Certification: ENCS. Product Code: PIM000088309. | Australia |
| Silaplane TM-0701T | Silaplane TM-0701T with a Molecular Weight (Mn) of 423 can react with Acrylic resins to impart the excellent properties of silicone to various organic resins. As a result, Silaplane can be used as a raw material for polymers. Group: Specialty chemicals, electronic & specialties, paints & coatings, polymers. CAS No. 17096-07-0. Composition: Reactive silicone. Application: Adhesives & Sealants, Architectural and Deco., Automotive Paints, Construction, Electronic Chemicals, Fibers, Textiles & Films, Lamination and Converting, Masterbatch & Compounders, Polymer Producers, Powder Coating, Printing Inks, Rubber & Elastomers, Thermosets & Composites, Thermoplastic Transformers. Function: Adhesion Promoters, Anti-Graffiti, Antiscratch, Coupling Agents / Chain extenders, Dispersing Agents, Intermediates & Accelerators, Optical Materials, Other, Reagents, Rheology Modifiers, Semiconductor Materials, Surface Modifiers - Defoamers, Water Repellents, Acrylic Dispersions, Acrylic Emulsions, Acrylic Resins, Amino - Melamine - Urea Resins, Epoxy Resins, Phenolic Resins, Polyamide, Polyisocyanates, Polyurethane / Polyaspartics, Polyurethane Dispersions, Redispersable Powder, SBR Emulsions, Silane Terminated Polyethers, Silicone Resins, Styrene-Acrylic Dispersions, UV Binders and Oligomers, Vinyl Resins, Complex Inorganic Pigments, Functional Dyes, Iron Oxide, TiO13 (Titanium Dioxide), POLYMERS, Polymer Producers/Rheology modifier, SBR, Silicone Rubber, TPU, Raw Material for Electronics. Physical Form: Liquid. Recommended Dosage: 0.1-10% (Often in the range of 0.5-3%.). Certification: EINECS, ENCS. Product Code: PIM000088312. | Australia |
| SURVIXYL IS | SURVIXYL IS biofunctional by Ashland Specialty Chemical acts as a rejuvenating agent. It helps boost the Stemness Recovery Complex to preserve the niche environment of epidermal stem cells and optimize epidermal self-rejuvenation. Group: Personal care ingredients, cosmetics & toiletries. CAS No. 7732-18-5, 107-88-0. Composition: Amino Acid. Application: Skin Care. Function: Active. Physical Form: Liquid. Recommended Dosage: 0.5 - 1.5%. INCI Name: Aqua (and) Butylene Glycol (and) Pentapeptide-31. Claim: Anti-Aging. Product Code: PIM000004980. | Australia |
| SYLOID® ED 5 | SYLOID® ED 5 is a synthetic amorphous silica appearing as white free flowing powder, function as a matting agent. SYLOID® ED 5 provides a high porosity, easily dispersible untreated silica matting agent with a high matting efficiency. SYLOID® ED 5 is most commonly used in pigmented industrial and trade sales coating, coil coatings, water-based systems & unsaturated UV-polymer finishes applications. Please see the specification sheet below and for further details contact our local sales representative today. Group: Specialty chemicals, paints & coatings. Composition: Amorphous Silica. Application: Architectural and Deco., Can, Coil and Industrial, Construction. Function: Matting Agents. Physical Form: Nano powder. Product Code: PIM000045425. | Australia |
| SYLOID® RAD 2005 | SYLOID® RAD 2005 is a synthetic amorphous silica appearing as white free flowing powder and function as a matting agent. SYLOID® RAD 2005 offers the benefits in being easily dispersible, a high matting efficiency together with a low thickening effect and provides consistent gloss over varying coating weights andexcellent gloss and viscosity stability. SYLOID® RAD 2005 is recommended to use in UV-curing systems, EB-curing systems, Soft-feel coatings and waterborne coatings. Please see the specification sheet below and for further details contact our local sales representative today. Group: Specialty chemicals, paints & coatings. CAS No. 112945-52-5. Composition: Synthetic Amorphous Silica. Application: Can, Coil and Industrial, Can, Coil and Industrial, Powder Coating. Function: ADDITIVES, Matting Agents. Physical Form: Nano powder. Product Code: PIM000046534. | Australia |
| TELOSENSE | TELOSENSE biofunctional by Ashland Specialty Chemical acts as an anti-aging and anti-wrinkle agent. It is designed to reduce the signs of aging. It has been shown in-vitro to help maintain the TRF2 protein. It is shown to limit DNA damage following UVB exposure and reduce the appearance of depth and length of wrinkles. Group: Personal care ingredients, cosmetics & toiletries. CAS No. 100684-36-4, 68607-88-5, 56-81-5, 7732-18-5. Composition: Organic Molecule. Application: Baby Care, Skin Care. Function: Active. Physical Form: Liquid. Recommended Dosage: 0.5% - 1%. Certification: Cosmos. INCI Name: Water (and) Glycerin (and) Hydrolyzed Yeast Protein (and) Hydrolyzed Soy Protein. Claim: Anti-Aging, Anti-Wrinkle, Organic, Natural. Product Code: PIM000004982. | Australia |
| TR-184 | TR-184 is a white crystal powder act as a high-efficiency non-yellowing photo-initiator, which can be used in light-curing varnish system. It can be applied in platics and metallic finish varnishes as well as a an excellent starting aid for UV-printing inks. Group: Specialty chemicals, paints & coatings. CAS No. 947-19-3. Composition: 1-Hydroxycyclohexyl phenyl ketone. Application: Adhesives & Sealants, Architectural and Deco., Powder Coating, Printing Inks. Function: Photoinitiators. Physical Form: Micronized Powder. Product Code: PIM000050017. | Australia |
| TR-BENZOIN | TR-BENZOIN is a kind of photoinitiator for coatings, and can also be used for defoaming of powder coatings and synthesis of pharmaceutical intermediates. TR-BENZOIN can be used in UV pigmented coatings for wood, metal and plastics, powder coatings, intermediate of organic pigment, medicine, perfume and insecticide. Group: Specialty chemicals, paints & coatings. CAS No. 119-53-9. Composition: Benzoin. Application: Adhesives & Sealants, Can, Coil and Industrial, Printing Inks, Powder Coating. Function: Photoinitiators. Physical Form: Micronized Powder. Product Code: PIM000054807. | Australia |
| VITAL ET | VITAL ET biofunctional by Ashland Specialty Chemical acts as an anti-redness and soothing active. It is a unique bio-functional complex of tocopheryl phosphate (Vitamin E derivative) designed for sensitive skin, which helps reduce the appearance of redness and swelling on skin. It also helps in reduction of appearance of UV-induced redness, acne lesions and discomfort of sensitive skin from shaving. Group: Personal care ingredients, cosmetics & toiletries. CAS No. 648891-82-1, 648891-83-2. Composition: Disodium Lauriminodipropionate Tocopheryl Phosphates. Application: Baby Care, Skin Care, Sun Care. Function: Active. Physical Form: Emulsion. Recommended Dosage: 0.5 - 3%. INCI Name: Disodium Lauriminodipropionate Tocopheryl Phosphates. Claim: Soothing. Product Code: PIM000004987. | Australia |
Our database is helping our users find suppliers everyday.
