Find where to buy products from Australian suppliers, including: distributors, industrial manufacturers, bulk supplies and wholesalers of raw ingredients & finished goods.
Search for products or services, then visit the suppliers website for prices, SDS or more information. You can also view suppliers in NZ, UK or the USA.
| Product | Description | |
|---|---|---|
| XIAMETER 561 TRANSFORMER LIQUID | XIAMETER 561 TRANSFORMER LIQUID is a non-flammable, clear liquid for use as a cooling and insulating liquid for transformers and other electrical equipment. It is a polydimethylsiloxane that meets the requirements of both IEC 836 and ASTMD 4652-92. It has high thermal stability and oxidation resistance, a higher fire point and lower heat release rate than other types of class K insulating liquids, and good electrical properties and operating capabilities over a wide temperature range. XIAMETER 561 TRANSFORMER LIQUID is essentially non-toxic, environmentally safe, non-halogenated, compatible with a wide range of solid electrical insulating materials, contains no additives, is classified as non-hazardous, and does not sludge in service. Group: Personal care ingredients, homecare & institutional cleaning. CAS No. 63148-62-9. Composition: Synthetic. Application: Institutional Cleaner. Physical Form: Liquid. Product Code: PIM000043087. |  Australia |
| XIAMETER ACP-0001 Antifoam Compound | XIAMETER ACP-0001 Antifoam Compound is an effective, economical, and easy-to-use silicone fluid for the prevention of foam in water- and nonwatery-based industrial processes. In addition to its ability to prevent foam in distillation systems, paper production, and textiles, XIAMETER ACP-0001 Antifoam Compound can also be used to prevent foam in asphalt manufacturing and lubricating. Though XIAMETER ACP-0001 Antifoam Compound is effective even in low concentrations, higher concentrations may be necessary for processes with a high oil concentration. Group: Personal care ingredients, homecare & institutional cleaning. CAS No. 556-67-2, 541-02-6, 540-97-6. Composition: Synthetic. Application: Institutional Cleaner. Physical Form: Liquid. Product Code: PIM000043088. | Australia |
| XIAMETER ACP-0001 FG | XIAMETER ACP-0001 FG is a silicone-based foam control agent that is 100 percent active. Effective in concentrations as low as one part per million, it is one of the most efficient, economical and widely used food-grade antifoams. A yearly Food Safety audit is conducted by NSF in certain geographic regions using the Supplier Assurance - Food Safety Expectations and Criteria for Food Processing Facilities audit process. Group: Food & beverage ingredients, confectionery & bakery, processed food & food service, food supplements & nutrition, beverage & dairy. CAS No. 556- 67- 2, 541- 02- 6. Composition: Octamethylcyclotetrasiloxane, Decamethylcyclopentasiloxane. Application: Edible Oils, Soup, Seasonings. Function: Foaming agent. Physical Form: Liquid. Certification: Halal, JAKIM, MUI, Kosher, FSSC. Product Code: PIM000017089. | Australia |
| XIAMETER ACP-1000 Antifoam Compound | XIAMETER ACP-1000 Antifoam Compound is a 100% active silicone antifoam compound. It is designed to be used in a wide variety of industrial applications including oil and gas processing, asphalt processing, adhesives epoxy resins, pesticides, and more. XIAMETER ACP-1000 Antifoam Compound is a highly efficient and persistent antifoam/defoamer. It's easy to formulate into emulsions and dispersions, dispersible in polar and non-polar solvents, performs well in aqueous or non-aqueous systems, has a high flashpoint, and is efficient in aqueous and non-aqueous foaming systems. Group: Personal care ingredients, homecare & institutional cleaning. CAS No. 102782-80-9. Composition: Synthetic. Application: Insect Care. Physical Form: Liquid. Product Code: PIM000043090. | Australia |
| XIAMETER ACP-1400 Antifoam Compound | XIAMETER ACP-1400 Antifoam Compound is an anionic polymeric foam preventative in aqueous and nonaqueous industrial processes. This product is specifically designed for use in resin manufacturing, cutting oils, detergents, oil refining, and solvent processing. It is especially effective at preventing foaming in extreme pH environments. When used properly, this product is particularly economical and easy to use. Group: Personal care ingredients, homecare & institutional cleaning. CAS No. 2035064-87-8. Composition: Synthetic. Application: Institutional Cleaner. Physical Form: Liquid. Product Code: PIM000043091. | Australia |
| XIAMETER ACP-1500 | XIAMETER ACP-1500 is 100% active Food grade antifoam. Sterilizable, useful in powder food mixes, provides foam control when food mix is dispersed. Useful as antifoam in crop protection products. Group: Food & beverage ingredients, confectionery & bakery, processed food & food service, food supplements & nutrition, beverage & dairy. CAS No. 556- 67- 2, 541- 02- 7. Composition: Octamethylcyclotetrasiloxane, Decamethylcyclopentasiloxane. Application: Processed Food. Function: Foaming agent. Physical Form: Liquid. Recommended Dosage: Areas where a food-contact product is required due to the nature of the process (Foodcontact substance: Any substance used as a component during the manufacture of articles, which in their finished state, are intended to be brought and/or are brought temporarily or permanently in contact with foodstuffs). Certification: Halal, JAKIM, MUI, Kosher, FSSC. Product Code: PIM000017090. | Australia |
| XIAMETER ACP-1500 Antifoam Compund | XIAMETER ACP-1500 antifoam compound is odorless and tasteless as a 100% active silicone antifoam compound. This product is effective in hot or cold processes and can also be sterilized. It performs at low concentrations and is free of raw materials derived from animals. XIAMETER ACP-1500 antifoam compound is approved for food contact. This product is efficient in aqueous and nonaqueous foaming systems, and it's suitable for the control of foam during the dispersion of powdered agrochemical formulation in aqueous media. To use it as an antifoam agent, add the product to one component of a powder mix. The powder mix can then be dispersed with good foam control. Group: Personal care ingredients, homecare & institutional cleaning. CAS No. 67762-90-7. Composition: Synthetic. Application: Institutional Cleaner. Physical Form: Powder. Product Code: PIM000043092. | Australia |
| XIAMETER ACP-1920 Powdered Antifoam | XIAMETER ACP-1920 Powdered Antifoam is an effective process defoamer and antifoam for a wide variety of biotechnology applications and ultrafiltration systems. It is easy to use, requires no special handling, and is FDA approved for many foods uses because it is used on the dry side, XIAMETER ACP-1920 Powdered Antifoam can be used to prevent foaming in food processing, brewing, and water treatment processes. It prevents foaming when liquids are added to dry products like microwaveable cereal mixes, detergents, and fertilizers. XIAMETER ACP-1920 Antifoam Powder is designed for use by food manufacturers, beverage producers, and anyone else who needs a reliable way to prevent foaming during processing. Group: Personal care ingredients, homecare & institutional cleaning. CAS No. 67762-90-7. Composition: Synthetic. Application: Institutional Cleaner. Physical Form: Powder. Product Code: PIM000043093. | Australia |
| XIAMETER ACP-3183 Antifoam Compound | XIAMETER ACP-3183 Antifoam Compound is an all-in-one solution for foam control in aqueous and nonaqueous systems. This 100 percent active compound can be used in concentrations as low as one part per million. It is dispersible in water and organic solvents, making it easy to use without the need for additional agents. Applications include solvent washes, soluble cutting oils, semi-synthetic fluids, glycol processing, and industrial chemicals. Group: Personal care ingredients, homecare & institutional cleaning. CAS No. 9036-19-5, 2035064-87-8, 100-41-4. Composition: Synthetic. Application: Institutional Cleaner. Physical Form: Liquid. Product Code: PIM000043094. | Australia |
| XIAMETER ACP-3379 Antifoam Compound | XIAMETER ACP-3379 Antifoam Compound is a foam control agent and process aid for kraft and sulfite process stock washing. It's formulated with materials that conform to FDA Regulation 21 CFR 176.170, 176.180, and 176.210. It is a cost-effective alternative to mineral oil-based products, and it has other great features like improved pulp drainage, reduced soda losses, steam consumption, and easily formulated and preserved dilute emulsions. Group: Personal care ingredients, homecare & institutional cleaning. CAS No. 556-67-2. Composition: Synthetic. Application: Institutional Cleaner. Physical Form: Liquid. Product Code: PIM000043095. | Australia |
| XIAMETER AFE-0010 Antifoam Emulsion Food Grade | XIAMETER AFE-0010 Antifoam Emulsion Food Grade is a 10 percent-active, food-grade silicone emulsion. This antifoam is water dilutable and effective in a variety of systems. It is ready to use for food fermentation processes, high sugar-content systems, wastewater treatment, vegetable processing, and beverages. It is a ready-to-use solution that can also be diluted to meet the needs of specific processes. Group: Personal care ingredients, homecare & institutional cleaning. CAS No. 556-67-2. Composition: Synthetic. Application: Institutional Cleaner. Function: Anti-Foam. Physical Form: Liquid. Certification: FDA. Product Code: PIM000043097. | Australia |
| XIAMETER AFE-0100 Antifoam Emulsion Food Grade | XIAMETER AFE-0100 Antifoam Emulsion Food Grade, is a 30 percent silicone emulsion, is a water dilutable product that is easy to use and effective in many systems. This product is ideal for food fermentation operations, brine applications, vegetable processing, high sugar-containing products, and carpet cleaning. With its ability to improve process performance by reducing foam formation and stabilizing foam. XIAMETER AFE-0100 Antifoam Emulsion Food Grade is a valuable addition to your manufacturing operations. Group: Personal care ingredients, homecare & institutional cleaning. CAS No. 9004-99-3, 25322-68-3, 67762-90-7, 556-67-2, 541-02-6. Composition: Synthetic. Application: Floor & Surface Cleaner. Function: Anti-Foam. Physical Form: Liquid. Product Code: PIM000043098. | Australia |
| XIAMETER AFE-0100 FG | XIAMETER AFE-0100 FG 30% active, food-grade silicone emulsion designed to control foam in aqueous systems. Useful in industrial and food grade applications. Recommended applications include food fermentation operations, brine applications, vegetable processing, high sugar-containing products, and carpet cleaning. Group: Food & beverage ingredients, confectionery & bakery, processed food & food service, food supplements & nutrition, beverage & dairy. CAS No. 556- 67- 2. Composition: Octamethylcyclotetrasiloxane. Application: Sweet Snack, Fruit & Vegetables. Function: Foaming agent, Emulsifier. Physical Form: Liquid. Certification: Halal, JAKIM, MUI, Kosher, FSSC. Product Code: PIM000017093. | Australia |
| XIAMETER AFE-0300 Antifoam Emulsion, Food Grade | XIAMETER AFE-0300 Antifoam Emulsion, Food Grade is a 30% silicone. It's an antifoam product that can be diluted in water to increase its effectiveness in a variety of systems. This emulsion is ready to use, but it can also be diluted with water to make it easier to apply. It is effective in a variety of applications, including beverages, jams, jellies, fungicides, herbicides, pesticides, and detergents. Group: Personal care ingredients, homecare & institutional cleaning. CAS No. 67762-90-7, 9004-67-5, 556-67-2, 541-02-6. Composition: Synthetic. Application: Institutional Laundry. Function: Anti-Foam. Physical Form: Liquid. Product Code: PIM000043099. | Australia |
| XIAMETER AFE-0300 FG | XIAMETER AFE-0300 FG 30% active, food-grade silicone emulsion designed to control foam in aqueous systems. Recommended applications include beverages, jams/jelly products, fungicides, herbicides, pesticides and detergents. Group: Food & beverage ingredients, confectionery & bakery, processed food & food service, food supplements & nutrition, beverage & dairy. CAS No. 63148- 62- 9, 9004- 67- 5, 556- 67- 2. Composition: Siloxanes and silicones, dimethyl, Cellulose, methyl ether, Octamethylcyclotetrasiloxane. Application: Sweet Snack, Beverage. Function: Emulsifier. Physical Form: Liquid. Certification: Halal, JAKIM, MUI, Kosher, FSSC. Product Code: PIM000017092. | Australia |
| XIAMETER AFE-0310 Antifoam Emulsion | XIAMETER AFE-0310 Antifoam Emulsion is a 30% silicone antifoam based on XIAMETER ACP-0100 Antifoam Compound. It features immediate defoaming action at low concentrations and long-lasting foam inhibition. Thanks to its high solid content, it can easily be diluted and formulated to the required concentration. At a relatively low concentration, it has a very efficient antifoaming and defoaming action. Recommended applications include foam control in aqueous, chemical, oil, and petroleum systems. It controls aqueous foamers over a wide range of industrial processes and products; however, it is not intended to be used in food or drug processing. Potential uses include gas scrubbing (amine or carbonate), gas drying (glycol), and pesticide manufacture. Group: Personal care ingredients, homecare & institutional cleaning. CAS No. 2035064-87-8, 9005-00-9, 25322-68-3. Composition: Synthetic. Application: Insect Care. Physical Form: Liquid. Product Code: PIM000043100. | Australia |
| XIAMETER AFE-0400 Antifoam Emulsion | XIAMETER AFE-0400 Antifoam Emulsion. is a water-based 10% active silicone emulsion designed for fast foam knockdown and foam control in industrial applications such as dyeing, printing, fabric sinking, latex coating, bleaching, scouring, and finishing processes. It is an effective foam inhibitor in aqueous foaming systems and provides immediate foam knockdown and long-term foam inhibition at low addition levels. It can be added to all stages of the process and is stable in textile processes at pH 4-11. XIAMETER AFE-0400 Antifoam Emulsion can also be used to control foam up to 100°C. In addition, it has good compatibility with dyestuff, surfactants, and textile auxiliaries. Group: Personal care ingredients, homecare & institutional cleaning. CAS No. 9004-99-3, 556-67-2, 55965-84-9. Composition: Synthetic. Application: Floor & Surface Cleaner, Laundry. Physical Form: Liquid. Product Code: PIM000043101. | Australia |
| XIAMETER AFE-1110 Antifoam Emulsion | XIAMETER AFE-1110 Antifoam Emulsion is effective for various foaming systems. It can be used with or without dilution. XIAMETER AFE-1110 Antifoam Emulsion can be used in various applications such as wastewater treatment. XIAMETER AFE-1110 Antifoam Emulsion is effective at low dosages such as 50 ppm and shows good persistency. Group: Personal care ingredients, homecare & institutional cleaning. CAS No. 2035064-87-8, 7681-52-9, 55965-84-9. Composition: Synthetic. Application: Institutional Cleaner. Function: Anti-Foam. Physical Form: Liquid. Product Code: PIM000043096. | Australia |
| XIAMETER AFE-1247 Antifoam Emulsion | XIAMETER AFE-1247 Antifoam Emulsion is an antifoam emulsion that has excellent shear and dilution stability. Because of its non-ionic nature and good compatibility, it can be used in a variety of systems, such as non-ionic, anionic, cationic surfactant, or polymer systems without forming a complex. XIAMETER AFE-1247 Antifoam Emulsion has a low viscosity, is easy to use, and is compatible with most systems. It is ideal for water-soluble and dispersible metalworking fluids and water-based coatings and inks. Group: Personal care ingredients, homecare & institutional cleaning. Composition: Synthetic. Application: Household Polishes, Institutional Cleaner, Floor & Surface Cleaner. Physical Form: Liquid. Product Code: PIM000043102. | Australia |
| XIAMETER AFE-1410 Antifoam Emulsion | XIAMETER AFE-1410 Antifoam Emulsion is a water-dilutable, 10% active silicone emulsion designed for controlling foam in aqueous systems. It is exempt from tolerance at 40 CFR 180.1001 (d) for pesticide formulations applied to growing crops only. XIAMETER AFE-1410 Antifoam Emulsion works effectively in very low concentrations and extreme pH conditions, making it an ideal choice for a variety of situations, including agrochemical systems, textile manufacturing, gas processing, printing fountain solutions, resin manufacturing, and others. Group: Personal care ingredients, homecare & institutional cleaning. Composition: Synthetic. Application: Household Polishes, Fabric care. Physical Form: Liquid. Product Code: PIM000043103. | Australia |
| XIAMETER AFE-1520 | XIAMETER AFE-1520 Antifoam Emulsion is a 20 percent active, food-grade, silicone emulsion. This antifoam is a water dilutable and effective in both hot and cold systems. It is economical and easy to use, while also more effective in lower concentrations than most other antifoams. XIAMETER AFE-1520 Antifoam Emulsion can be used in the following industries: food processing, chemical, agrichemical, beverage manufacturing, meat/poultry/seafood processing, fermentation operations, wastewater treatment, and vegetable processing. Group: Personal care ingredients, homecare & institutional cleaning. CAS No. 67762-90-7, 9004-67-5, 556-67-2. Composition: Synthetic. Application: Household Polishes, Insect Care. Physical Form: Liquid. Product Code: PIM000043104. | Australia |
| XIAMETER AFE-1520 | XIAMETER AFE-1520 is an easy-to-use silicone-based emulsion used in the kettle and fermenter to prevent boilovers and loss due to foam. XIAMETER AFE-1520 is suitable to use in a wide range of food and beverages application, such as brewing, beverages, powdered beverages and jams & sauces. XIAMETER AFE-1520 is water dilutable, effective in both hot & cold systems, economical, and effective in low concentration. Group: Food & beverage ingredients, confectionery & bakery. CAS No. 9004- 67- 5. Composition: Cellulose, methyl ether. Application: Fruit & Vegetables, Processed Food, Beverage, Meat Products. Function: Emulsifier. Physical Form: Liquid. Certification: FSSC, Kosher, Halal, JAKIM, MUI. Product Code: PIM000017091. | Australia |
| XIAMETER MEM-0008 EMULSION | XIAMETER MEM-0008 Emulsion is a water-dilutable release agent and lubricant emulsion containing 35 percent medium viscosity polydimethylsiloxane. It features good emulsion stability, and it's effective at low concentrations. XIAMETER MEM-0008 Emulsion is ideal for releasing resin-bonded shell molds and cores in metal casting, fabricating plastic and rubber parts and components, and rigid polyurethane foam release. Group: Personal care ingredients, homecare & institutional cleaning. CAS No. 160875-66-1. Composition: Synthetic. Application: Institutional Cleaner, Household Polishes. Physical Form: Liquid. Product Code: PIM000043135. | Australia |
| XIAMETER MEM-0024 EMULSION | XIAMETER MEM-0024 EMULSION contains 35% dimethyl polysiloxne fluid as noninoic emulsion. it use for a general-purpose mold release agent for food contact applications. it complies with certain FDA regulations and Kosher certified products are available. Group: Personal care ingredients, homecare & institutional cleaning. Composition: Synthetic. Application: Institutional Cleaner. Physical Form: Liquid. Product Code: PIM000043105. | Australia |
| XIAMETER MEM-0039 EMULSION | XIAMETER MEM-0039 EMULSION has been specially formulated for use as polish ingredient and release agent/lubricant either "as received" or "pre-diluted" with water. It is ready to use and non-ionic. It provides gloss and water repellency, with good wetting and slips characteristics. Group: Personal care ingredients, homecare & institutional cleaning. CAS No. 160875-66-1, 556-67-2. Composition: Synthetic. Application: Household Polishes, Fabric care. Physical Form: Liquid. Product Code: PIM000043106. | Australia |
| XIAMETER MEM-0347G EMULSION | XIAMETER MEM-0347G EMULSION is concentrated emulsion of hydroxyl endblocked PDMS fluid. It has higly surface active to provide good release, lubricity, water repellency and gloss. Group: Personal care ingredients, homecare & institutional cleaning. CAS No. 68131-40-8, 84133-50-6, 556-67-2. Composition: Synthetic. Application: Household Polishes, Fabric care. Physical Form: Liquid. Product Code: PIM000043107. | Australia |
| XIAMETER MEM-0349 EMULSION | XIAMETER MEM-0349 EMULSION is an aqueous emulsion of polydimethylsiloxane. It provides gloss and water repellency, good wetting, and slip characteristics. As ingredinet in polishes, XIAMETER MEM-0349 Emulsion is used to provde good gloss with minimum smear in formulation. Group: Personal care ingredients, homecare & institutional cleaning. CAS No. 160875-66-1, 556-67-2, 55965-84-9. Composition: Synthetic. Application: Household Polishes, Fabric care. Physical Form: Liquid. Product Code: PIM000043108. | Australia |
| XIAMETER MEM-0349 EMULSION | XIAMETER MEM-0349 Emulsion is a 60% actives non-ionic emulsion formulated with a polydimethylsiloxane. Extensive testing has shown that XIAMETER MEM-0349 Emulsion performs comparably to its predecessor and offers better dilution stability at 20% solids. As a ingredient in polishes, XIAMETER MEM-0349 Emulsion is used to provide good gloss with minimum smear in both car and furniture polish formulations. Group: Specialty chemicals, electronic & specialties, paints & coatings. Composition: Poly(oxy-1, 2-ethanediyl), alpha- (2-propylheptyl)-omega hydroxy, Mixture of: 5-chloro-2-methyl-2Hisothiazol-3-one and 2-methyl2H-isothiazol-3-one (3:1). Application: Lubricants, Architectural and Deco., Construction. Function: ADDITIVES, Water Repellents, BINDERS, Acrylic Emulsions. Physical Form: Liquid. Product Code: PIM000031767. | Australia |
| XIAMETER MEM-0949 EMULSION (SILICONE 949) | Emollient and conditioning ingredient, offering excellent tactile properties and softening effects in hair care and skincare formula. It is easy to formulate into hair treatment products. Silicone 949 is dilutable in water. Uses: Hair care (Shampoos, Conditioner, Styling). Group: Raw Materials; Emollients; Hair Conditioning; Silicones; Hair Styling. Alternative Name: Amodimethicone, Trideceth-12, Cetrimonium Chloride. Grade: Cosmetic Ingredients. CAS Number: 106842-44-8, 24938-91-8, 112-02-7. Pack Sizes: 1kg, 5 kgs, 10kg, 20kg. Similar to: Xiameter MEM-0949 Emulsion (Dow Chemical Company), BRB 1282 S (BRB International), DC 949 (Dow Corning). |  Australia & Worldwide |
| XIAMETER MEM-1716 EMULSION | XIAMETER MEM-1716 EMULSION is cationic emulsion containing 30 percent high viscosity polydimethylsiloxane. Used as a general purpose release agent, lubricant, and polish additive. Is slightly hazy as supplied and may be diluted to nearly translucent. Serves as an additive in automotive and household polishes, including vinyl and tire dressings, the high viscosity fluid can provide very good gloss. Small particle size of the micro emulsion provides good dilution stability, and can improve the wetting out onto a surface, providing a more consistent coating. Offers good emulsion stability, water dilutability. Shows effectiveness at low concentrations. Group: Personal care ingredients, homecare & institutional cleaning. Composition: Synthetic. Application: Household Polishes, Fabric care. Physical Form: Liquid. Product Code: PIM000043109. | Australia |
| XIAMETER MEM-8035 EMULSION | XIAMETER MEM-8035 EMULSION is a cationic, 35% active emulsion based on amino-functional silicone polymer. It is suitable to provide a 'Fabric Care' benefit for rinse cycle fabric softners. Based on internal panel testing results, the use of this product provides highly significant improvements in anti-wrinkle, ease of ironing, ease of wrinkle removal, and significant results in fabric water absorbency compared to conventional rinse cycle fabric softener compositions. Group: Personal care ingredients, homecare & institutional cleaning. CAS No. 68554-54-1, 556-67-2, 78330-21-9, 112-02-7, 541-02-6, 51374-75-5, 2016-45-7, 112-69-6. Composition: Synthetic. Application: Fabric care, Household Polishes. Physical Form: Liquid. Product Code: PIM000043110. | Australia |
| XIAMETER MHX-1107 FLUID 20 cSt and 30 cSt | XIAMETER MHX-1107 FLUID is an innovative, 100% reactive polymethylhydrogensiloxane. It is a highly effective hydrophobing treatment for plasterboard and plaster blocks. When diluted in solvents, XIAMETER MHX-1107 FLUID can be effectively used to improve dispersion of powders and granular materials to make them water repellent and free-flowing and reduce caking. Group: Personal care ingredients, homecare & institutional cleaning. CAS No. 63148-57-2. Composition: Synthetic. Application: Household Polishes, Insect Care. Physical Form: Liquid. Product Code: PIM000043111. | Australia |
| XIAMETEROFS-0772 SILICONATE | XIAMETER OFS-0772 Siliconate is a non-flammable, water soluble sodium methyl siliconate solution designed to impart water repellency to a wide variety of surfaces. Key Application: Bricks; to increase water repellency and reduce water absorption, Manufactured and natural stones, such as limestone, sandstone and ceramics; to reduce efflorescence and improve resistance to effects of weathering, Roofing granules and other products used in contact with asphalt; to provide stain resistance and to improve adhesion of granules to asphalt, High absorptive mineral aggregates such as Perlite; to reduce water absorption, Decorative tile; to seal against moisture. Group: Specialty chemicals, paints & coatings. Composition: Water dilutable sodium methyl siliconate solution. Application: Construction, Architectural and Deco. Function: Flame Retardants. Physical Form: Liquid. Product Code: PIM000031768. | Australia |
| XIAMETER OFS-0777 Siliconate | XIAMETER OFS-0777 Siliconate Water repellent for masonry and natural surfaces Penetrating and breathable. Low VOC. Nonflammable Features & Benefits. Imparts water repellency to a wide variety of substances. Can be applied by vacuum impregnation or surface treatment (brushing/ rolling/ dipping) for the surface treatment of wood. Reduces water absorption into the substrate, thus reducing spalling due to freeze-thaw and efflorescence, thereby increasing the life of the substrate. Group: Personal care ingredients, homecare & institutional cleaning. CAS No. 31795-24-1. Composition: Synthetic. Application: Institutional Cleaner. Function: Anti-Deposition, Coating Agent. Physical Form: Liquid. Recommended Dosage: 1-6%. Product Code: PIM000068676. | Australia |
| XIAMETER OFS-0777 SILICONATE | XIAMETER OFS-0777 SILICONATE is a water repellent for wood surfaces, bricks, sandstone, limestone, and ceramics impregnation. Group: Specialty chemicals, paints & coatings. Composition: Water dilutable potassium methyl siliconate solution. Application: Construction. Function: ADDITIVES, Water Repellents. Physical Form: Liquid. Recommended Dosage: 1-3%. Product Code: PIM000004157. | Australia |
| XIAMETER OFS-6020 SILANE | XIAMETER OFS-6020 Silane is made from Diaminofunctional silane, and functions as a coupling agent. XIAMETER OFS-6020 Silane possesses both organic and inorganic reactivity. XIAMETER OFS-6020 Silane can react with organic polymers and glass or other inorganic mineral surfaces. XIAMETER OFS-6020 Silane offers the benefits to improve adhesion and increase wet and dry tensile strength, flexural strength & compressive strength and Improved compatibility between inorganic filler and organic polymer. XIAMETER OFS-6020 Silane is recommended to use in clay-reinforced elastomers such as natural and nitrile rubber, mineral-reinforced nylon 6, nylon 6/6 and polybutylene terephthalate, fibreglass finish or as resinous additive and thermoset resins. Please see the specification sheet below and for further details contact our local sales representative today. Group: Specialty chemicals, paints & coatings, polymers. Composition: Diaminofunctional silane. Application: Printing Inks, Can, Coil and Industrial, Architectural and Deco., Automotive Paints, Adhesives & Sealants, Rubber & Elastomers. Function: Adhesion Promoters, ADDITIVES, Coupling Agents / Chain Extenders. Physical Form: Liquid. Recommended Dosage: 1% on resin solid. Product Code: PIM000004159. | Australia |
| XIAMETER OFS-6070 SiLANE | XIAMETER OFS-6070 SiLANE is a product that is used to make inorganic surfaces hydrophobic. Group: Specialty chemicals, paints & coatings. Composition: Alkoxy silane. Application: Construction. Function: ADDITIVES, Water Repellents. Physical Form: Liquid. Recommended Dosage: 0.5-1%. Product Code: PIM000004130. | Australia |
| XIAMETER OFS-6076 SILANE | XIAMETER OFS-6076 Silane is an ambifunctional compound containing chloroalkyl functionality and three hydrolyzable alkoxysilyl groups. Possessing both organic and inorganic reactivity, the product has a dual nature and can react with organic polymers and also with glass, metal and other inorganic materials. As a coupling agent, it can be used either as an additive to the polymer or as a pre-treatment on inorganic surfaces. Many chemical reactions are possible, providing significant improvements in polymer/filler or polymer/substrate interaction. Group: Specialty chemicals, paints & coatings, polymers. Composition: 3-chloropropyltrimethoxysilane s. Application: Construction, Architectural and Deco. Function: POLYMERS, Butyl Rubber, Silicone Rubber. Physical Form: Liquid. Product Code: PIM000031769. | Australia |
| XIAMETER OFS-6610 SILANE | XIAMETER OFS-6610 SILANE is made from amino functional alkoxysilane, function as coupling agent and appears in a colourless to very plae yellow liquid. XIAMETER OFS-6610 SILANE provides a range of benefits including to improve adhesion, wet and dry tensile & flexural strength and modulus, also to increase transparency of fiberglass composite with its high purity. XIAMETER OFS-6610 SILANE is recommneded to use in many plastic, resin and elastomers, mineral filled rubber and foundry resins applications. Please see the specification sheet below and for further details contact our local sales representative today. Group: Specialty chemicals, polymers. Composition: Amino functional alkoxysilane. Application: Rubber & Elastomers. Function: POLYMERS, Other. Physical Form: Liquid. Product Code: PIM000046529. | Australia |
| XIAMETER OFS-6697 SILANE | Tetraethyl orthosilicate (TEOS) for the consolidation of construction materials such as stones in buildings or monuments. Group: Specialty chemicals, paints & coatings. CAS No. 78-10-4. Composition: Tetraethyl orthosilicate (TEOS). Application: Construction. Function: Coupling Agents / Chain extenders. Physical Form: Liquid. Recommended Dosage: 70-100%. Certification: AICS. Product Code: PIM000031770. | Australia |
| XIAMETER OFX-0077 FLUID US | XIAMETER OFX-0077 FLUID US is 100% silicone polyether that show good compatibility with water-based formulations. It provides leveling and wetting performance, enhances gloss, and improves mar resistance in coatings formulation. Group: Personal care ingredients, homecare & institutional cleaning. CAS No. 27306-78-1, 27252-80-8. Composition: Synthetic. Application: Fabric care. Physical Form: Liquid. Product Code: PIM000043112. | Australia |
| XIAMETER OFX-0190 (DC 190) | Xiameter OFX-0190 Fluid is a silicone glycol copolymer soluble in water, alcohol and hydroalcoholic systems. It is hydrolytically stable. It is a clear to slightly hazy fluid. Uses: Skin care Hair care. Group: Personal Care; Cosmetic Raw Materials; Silicones; Humectant; Emollient. Alternative Name: PEG/PPG-18/18 Dimethicone. Grade: Cosmetic Ingredients. CAS Number: 68037-64-9 or 556-67-2. Pack Sizes: 250g, 500 grams, 1kg, 5 kgs, 10kg, 20kg. Similar to: Andisil SP 1818 (AB Specialty Silicones), Chemlines 193 (Chemlines), Emulsil S-390 (Innospec Performance Chemicals), Jeesilc DMC 19 (Jeen International Corporation), Silsurf J-1013-V-CG (Siltech LLC). | Australia & Worldwide |
| XIAMETER OFX-0190 FLUID | XIAMETER OFX-0190 FLUID is a silicone glycol copolymer soluble in water, alcohol and hydroalcoholic systems. It is a low order of acute toxicity and acts as a surface tension depressant and wetting agent in a wide variety of cosmetic and personal care products. Including hair sprays, skin care lotions, perfumes, and shaving soaps. XIAMETER OFX-0190 FLUID is compatible with a wide range of cosmetic ingredients, imparts a soft silky feel to the hair, and ensures smooth wet shaving foams. This fluid makes very stable formulations at the low usage levels required. It is non-irritant to the skin. XIAMETER OFX-0190 FLUID is stable of water solutions containing up to 5% XIAMETER OFX-0190 FLUID, which are excellent. Acid or alkaline extremes reduce stability. It may be used as a resin plasticiser in hair styling products or humectant, or emollient in skin products. Group: Personal care ingredients, homecare & institutional cleaning. CAS No. 68037-64-9. Composition: Synthetic. Application: Hair Care, Skin Care. Physical Form: Liquid. Product Code: PIM000043113. | Australia |
| XIAMETER OFX-0190 FLUID | XIAMETER OFX-0190 FLUID is a silicone-ethylene oxide/propylene oxide copolymer; Slip, mar resistance, antiblocking agent. XIAMETER OFX-0190 FLUID's key applications are in Textile and Leather & Paint, inks and coating. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 556-67-2. Composition: Octamethyl Cyclotetrasiloxane. Application: Adhesives & Sealants, Automotive Paints, Fibers, Textiles & Films, Lamination and Converting, Printing Inks. Physical Form: Liquid. Product Code: PIM000031986. | Australia |
| XIAMETER OFX-0193 FLUID | XIAMETER OFX-0193 FLUID is a nonionic, freeze-thaw stable polydimethylsiloxane that combines the benefits of polydimethylsiloxane with those of a wetting agent and surface tension depressant. Its compatible with a wide range of cosmetic ingredients, including anionic and nonionic surfactants. In hair styling products, XIAMETER OFX-0193 FLUID can be used as a foam builder to form a dense, stable foam. In addition, it acts as a plasticizer for resins to improve hair body and curl retention. In skin care products, XIAMETER OFX-0193 FLUID is an emollient that imparts a soft and silky feel to the skin, while functioning as a humectant and emollient in leave-on formulations. Group: Personal care ingredients, homecare & institutional cleaning. CAS No. 25322-68-3, 556-67-2. Composition: Synthetic. Application: Skin Care, Hair Care. Physical Form: Liquid. Product Code: PIM000043114. | Australia |
| XIAMETER OFX-0193 FLUID | XIAMETER OFX-0193 Fluid is a silicone polyether copolymer, is a graft style hydrolytically stable silicone polyether surfactant with a calculated HLB of 12. Group: Specialty chemicals, paints & coatings. Composition: Polyethylene glycol. Application: Construction, Architectural and Deco. Physical Form: Liquid. Product Code: PIM000031771. | Australia |
| XIAMETER OFX-0203 FLUID | XIAMETER OFX-0203 FLUID is a release agent for molding, extruding, and fabricating rubber and plastic parts, and in die-casting metals. This products features include imparting good gloss and color enhancement, providing a heat-stable film, and an effective release (parting) agent for die-cast metals. It also allows molded parts to be coated/painted/plated without excessive cleaning, and mold and die replacement is minimized (reduced maintenance cost). It can also be used as a parting agent in die casting of aluminum, zinc, magnesium, and other metals that are subsequently painted, bonded or plated. Additionally, it can be used as an additive or plasticizer in rubber and plastics formulations, including plastisol. Group: Personal care ingredients, homecare & institutional cleaning. CAS No. 68037-76-3. Composition: Synthetic. Application: Household Polishes. Physical Form: Liquid. Product Code: PIM000043134. | Australia |
| XIAMETER OFX-0531 FLUID | XIAMETER OFX-0531 FLUID is a double functional polydimethyl-siloxane. The highly polar nature of the amino-functional groups and the ability of the silicon-functional methoxy groups to cure cause the polish film to deposit and adhere strongly to automobile finishes, chrome, and aluminum surfaces. XIAMETER OFX-0531 FLUID is providing the benefits of providing excellent detergent resistance, durable protection, good gloss, easy to rub out, provide color enhancement, premium softener for leather treatments, and improves abrasion resistance, improves water repellency & improved surface properties. XIAMETER OFX-0531 FLUID can be applied to autopolishes and cleaners, silicone coating & minimising problems of silicone transfer. Group: Personal care ingredients, homecare & institutional cleaning. CAS No. 71750-80-6, 8052-41-3, 67-63-0, 25551-13-7, 25550-14-5, 111-84-2, 556-67-2. Composition: Synthetic. Application: Household Polishes, Car Care. Physical Form: Liquid. Product Code: PIM000043115. | Australia |
| XIAMETER OFX-0536 FLUID | XIAMETER OFX-0536 FLUID is a dual functional polydimethyl-siloxane. The highly polar nature of the amino-functional groups and the ability of the methoxy functional groups to cure enable a soft and glossy film to deposit and adhere strongly to leather surfaces. Group: Personal care ingredients, homecare & institutional cleaning. CAS No. 71750-80-6, 8052-41-3, 67-63-0, 25551-13-7, 25550-14-5, 111-84-2, 556-67-2. Composition: Synthetic. Application: Fabric care. Physical Form: Liquid. Product Code: PIM000043116. | Australia |
| XIAMETER OFX-3667 FLUID | XIAMETER OFX-3667 FLUID is a block copolymer that can be added to organic components to improve surface properties. It is soluble in water and polar solvents and disperses in hydrocarbons and oils. XIAMETER OFX-3667 FLUID can be used in fiber lubrication for greater compatibility with organic lubricant components than conventional silicones and more scourable than conventional silicones. In other applicationfor fabric coating additive, it can be used to improve abrasion resistance, anti-blocking agent, and improve flow out of the resinous coating. Group: Personal care ingredients, homecare & institutional cleaning. CAS No. 102783-01-7. Composition: Synthetic. Application: Fabric care. Physical Form: Liquid. Product Code: PIM000043117. | Australia |
| XIAMETER OFX-5211 | XIAMETER OFX-5211 is a rapid spreading and wetting agent. Group: Specialty chemicals, paints & coatings. Composition: Low viscosity silicone polyether liquid. Application: Architectural and Deco., Printing Inks, Can, Coil and Industrial, Can, Coil and Industrial, Automotive Paints. Function: ADDITIVES, Surface Modifiers - Defoamers. Physical Form: Liquid. Recommended Dosage: 0.01-0.5%. Product Code: PIM000004164. | Australia |
| XIAMETER OFX-5211 Fluid | XIAMETER OFX-5211 Fluid is a performance enhancer for agricultural chemicals. Silicone glycol copolymer for leathers. In Agricultural Applications XIAMETER OFX-5211 Fluid is a low molecular weight nonionic silicone polyether surfactant, developed to improve the wetting, spreading, and penetration of agricultural chemicals. It may be used as a formulation ingredient in pesticide products, or as a tank-mix adjuvant for foliar applied chemicals. In Leather Applications XIAMETER OFX-5211 Fluid is a low viscosity, non-ionic poly-oxyethylene-modified polydimethyl-siloxane, more commonly referred to as silicone glycol copolymer. Group: Personal care ingredients, homecare & institutional cleaning. CAS No. 67674-67-3. Composition: Synthetic. Application: Fabric care, Insect Care. Physical Form: Liquid. Product Code: PIM000043118. | Australia |
| XIAMETER PMX-0210 Silicone Fluid | XIAMETER PMX-0210 Silicone Fluid is a silicone fluid that has improved oxygen stability. In the presence of oxygen or air, XIAMETER PMX-0210 Silicone Fluid has a greater resistance to high temperatures. XIAMETER PMX-0210 Silicone Fluid can be used in mechanofluid devices and controls and heat transfer fluid in oil baths with the benefits of minimal viscosity change when subjected to severe heat and shear stresses. Group: Personal care ingredients, homecare & institutional cleaning. CAS No. Composition: Synthetic. Application: Bath & Toilet Cleaner. Physical Form: Liquid. Product Code: PIM000043119. | Australia |
| XIAMETER PMX-0245 Cyclopentasiloxane | XIAMETER PMX-0245 Cyclopentasiloxane is a base fluid in several personal care products, with excellent spreading, easy rubout, and lubrication properties together with unique volatility characteristics. The application in personal care can be used in antiperspirants, deodorants, hair sprays, cleansing creams, skin creams, lotions and stick products, bath oils, suntan, shaving products, make-up, and nail polishes. XIAMETER PMX-0245 Cyclopentasiloxane gives a low surface tension, soft silky feel to the skin, excellent spreading, leaves of oily residue, detackifaction, and non-greasy. Group: Personal care ingredients, homecare & institutional cleaning. CAS No. 541-02-6. Composition: Synthetic. Application: Sun Care, Hair Care, Skin Care, Antiperspirants & Deodorants. Physical Form: Liquid. Product Code: PIM000043120. | Australia |
| XIAMETER PMX-0344 Cyclosiloxane Blend | XIAMETER PMX-0344 Cyclosiloxane Blend is a base fluid in several personal care products, with excellent spreading, easy rubout, and lubrication properties together with unique volatility characteristics. In cleaning products, XIAMETER PMX-0344 Cyclosiloxane Blend lifts and removes dirt without leaving any greasy resiudeo. Group: Personal care ingredients, homecare & institutional cleaning. CAS No. 556-67-2, 541-02-6. Composition: Synthetic. Application: Fragrance, Soap & Bath, Sun Care, Hair Care, Skin Care, Antiperspirants & Deodorants. Physical Form: Liquid. Product Code: PIM000043121. | Australia |
| XIAMETER PMX-0930 SILANOL FLUID | XIAMETER PMX-0930 Silanol Fluid can react with other molecule and provide new polymer. The terminal OH group can react with Si-OH, Si-OR, Si-H functionality. XIAMETER PMX-0930 Silanol Fluid can be formulated to silicone elastomers and expect cross-linking reaction. Key Application: Polymer modification, Coating formulation, Elastomer formulation. Group: Specialty chemicals, paints & coatings, polymers. Composition: Polydimethylsiloxane with hydroxy terminal group. Application: Architectural and Deco., Can, Coil and Industrial, Construction. Function: Silicone Rubber, ADDITIVES, Other. Physical Form: Liquid. Product Code: PIM000031772. | Australia |
| XIAMETER PMX-200 SILICONE FLUID 1000CS | It acts as a protecting and de-soaping agent. It is a polydimethylsiloxane fluid and is tasteless, odorless and non-toxic. It imparts soft and velvety skin feel and spreads easily on both skin and hair. It provides ease of application, greater depth of gloss and prevents foaming during rubout. Moreover, it offers ease of buffering, color enhancement, high water repellency, high compressibility and high shearability without breakdown. It exhibits high spreadability, compatibility, low environmental and fire hazard, low reactivity and vapour pressure, good heat stability and low surface energy. Uses: Skin care (Facial care, Facial cleansing, Body care, Baby care). Group: Personal Care; Cosmetic Raw Materials; Silicones. Alternative Name: Dimethicone. Grade: Cosmetic Ingredients. CAS Number: 63148-62-9 or 9006-65-9 or 9016-00-6. Pack Sizes: 1kg, 5 kgs, 10kg, 20kg. | Australia & Worldwide |
| XIAMETER PMX-200 SILICONE FLUID 100CS | Acts as a protecting and de-soaping agent. It is a polydimethylsiloxane fluid and is tasteless, odorless and non-toxic. It imparts soft and velvety skin feel and spreads easily on both skin and hair. It provides ease of application, and prevents foaming during rubout. Moreover, it offers ease of buffering, color enhancement, high water repellency, high compressibility and high shearability without breakdown. It exhibits high spreadability, compatibility, low environmental and fire hazard, low reactivity and vapour pressure, good heat stability and low surface energy. XIAMETER PMX-200 Silicone Fluid 100 cSt finds application in formulating hand creams and lotions to form an effective barrier and a more uniform film. Uses: Skin care (Hand creams, Lotions). Group: Personal Care; Cosmetic Raw Materials; Silicones. Alternative Name: Dimethicone. Grade: Cosmetic Ingredients. CAS Number: 63148-62-9 or 9006-65-9 or 9016-00-6. Pack Sizes: 1kg, 5 kgs, 10kg, 20kg. | Australia & Worldwide |
| XIAMETER PMX-200 Silicone Fluid, 100cSt | XIAMETER PMX-200 Silicone Fluid, 100cSt is a silicone fluid for foam control and additive applications. XIAMETER PMX-200 Silicone Fluid, 100cSt has the application for a variety of automotive, furniture, metal, and specialty polishes. Ingredient in protective creams, aerosol shave lathers, antiperspirants, and other personal care products and coatings additive, damping fluid, elastomer and plastics lubricant, electrical insulating fluid, mechanical fluid, mold release agent, plastics additive, specialty chemical products ingredient, leather finishing, surface active agent. Group: Personal care ingredients, homecare & institutional cleaning. CAS No. 63148-62-9. Composition: Synthetic. Application: Fabric care, Floor & Surface Cleaner, Car Care. Physical Form: Liquid. Product Code: PIM000043123. | Australia |
| XIAMETER PMX-200 Silicone Fluid, 10cSt | XIAMETER PMX-200 Silicone Fluid 10cSt is a polydimethylsiloxane base fluid. it has good dielectric properties, high water repellency, shear ability without breakdown, high compressibility, and high spread ability. XIAMETER PMX-200 Silicone Fluid 10cSt can be used in Personal care products such as antiperspirants, deodorants, hair sprays, cleansing creams, skin creams, lotions, bath oils, suntan products, and nail polishes. Industrial applications such as glass vial and lens coatings, household product ingredients, mechanical fluids, penetrating oil ingredients, surface-active agents, coatings, electrical insulating fluids, and polish ingredients. Group: Personal care ingredients, homecare & institutional cleaning. CAS No. 63148-62-9. Composition: Synthetic. Application: Antiperspirants & Deodorants, Fabric care, Floor & Surface Cleaner, Car Care. Physical Form: Liquid. Product Code: PIM000043124. | Australia |
| XIAMETER PMX-200 Silicone Fluid, 12500cSt | XIAMETER PMX-200 Silicone Fluid, 12500cSt is a silicone fluid for foam control and additive applications. XIAMETER PMX-200 Silicone Fluid, 12500cSt has the application for a variety of automotive, furniture, metal, and specialty polishes. Ingredient in protective creams, aerosol shave lathers, antiperspirants, and other personal care products and coatings additive, damping fluid, elastomer and plastics lubricant, electrical insulating fluid, mechanical fluid, mold release agent, plastics additive, specialty chemical products ingredient, leather finishing, surface active agent. Group: Personal care ingredients, homecare & institutional cleaning. CAS No. 63148-62-9. Composition: Synthetic. Application: Fabric care, Floor & Surface Cleaner, Car Care. Physical Form: Liquid. Product Code: PIM000043125. | Australia |
| XIAMETER PMX-200 Silicone Fluid, 12,500cSt | XIAMETER PMX-200 Slicone Fluid, 12,500cst is for foam control and additive applications. It has the application for a variety of automotive, furniture, metal, and specialty polishes. Ingredient in protective creams, aerosol shave lathers, antiperspirants, and other personal care products and coatings additive, damping fluid, elastomer and plastics lubricant, electrical insulating fluid, mechanical fluid, mold release agent, plastics additive, specialty chemical products ingredient, leather finishing, surface active agent. Group: Personal care ingredients, homecare & institutional cleaning. CAS No. 63148-62-9. Composition: Synthetic. Application: Fabric care, Floor & Surface Cleaner, Car Care. Physical Form: Liquid. Product Code: PIM000043122. | Australia |
| XIAMETER PMX-200 Silicone Fluid, 200cSt | XIAMETER PMX-200 Silicone Fluid, 200cSt is a silicone fluid for foam control and additive applications. XIAMETER PMX-200 Silicone Fluid, 200cSt has the application for a variety of automotive, furniture, metal, and specialty polishes. Ingredient in protective creams, aerosol shave lathers, antiperspirants, and other personal care products and coatings additive, damping fluid, elastomer and plastics lubricant, electrical insulating fluid, mechanical fluid, mold release agent, plastics additive, specialty chemical products ingredient, leather finishing, surface active agent. Group: Personal care ingredients, homecare & institutional cleaning. CAS No. 63148-62-9. Composition: Synthetic. Application: Fabric care, Floor & Surface Cleaner, Car Care. Physical Form: Liquid. Product Code: PIM000043126. | Australia |
| XIAMETER PMX-200 Silicone Fluid, 30000cSt | XIAMETER PMX-200 Silicone Fluid, 30000cSt is a silicone fluid for foam control and additive applications. XIAMETER PMX-200 Silicone Fluid, 30000cSt has the application for a variety of automotive, furniture, metal, and specialty polishes. Ingredient in protective creams, aerosol shave lathers, antiperspirants, and other personal care products and coatings additive, damping fluid, elastomer and plastics lubricant, electrical insulating fluid, mechanical fluid, mold release agent, plastics additive, specialty chemical products ingredient, leather finishing, surface active agent. Group: Personal care ingredients, homecare & institutional cleaning. CAS No. 63148-62-9. Composition: Synthetic. Application: Fabric care, Floor & Surface Cleaner, Car Care. Physical Form: Liquid. Product Code: PIM000043127. | Australia |
| XIAMETER PMX-200 Silicone Fluid, 350cSt | XIAMETER PMX-200 Silicone Fluid, 350cSt is a silicone fluid for foam control and additive applications. XIAMETER PMX-200 Silicone Fluid, 350cSt has the application for a variety of automotive, furniture, metal, and specialty polishes. Ingredient in protective creams, aerosol shave lathers, antiperspirants, and other personal care products and coatings additive, damping fluid, elastomer and plastics lubricant, electrical insulating fluid, mechanical fluid, mold release agent, plastics additive, specialty chemical products ingredient, leather finishing, surface active agent. Group: Personal care ingredients, homecare & institutional cleaning. CAS No. 63148-62-9. Composition: Synthetic. Application: Fabric care, Floor & Surface Cleaner, Car Care. Physical Form: Liquid. Product Code: PIM000043128. | Australia |
| XIAMETER PMX-200 SILICONE FLUID 500CS | Act as a protecting and de-soaping agent. It is a polydimethylsiloxane fluid and is tasteless, odorless and non-toxic. It imparts soft and velvety skin feel and spreads easily on both skin and hair. It provides ease of application and prevents foaming during rubout. Moreover, it offers ease of buffering, colour enhancement, high water repellence, high compressibility and high shearability without breakdown. It exhibits high spreadability, compatibility, low environmental and fire hazard, low reactivity and vapour pressure, good heat stability and low surface energy. It finds application in formulating hand creams and lotions to form an effective barrier and a more uniform film. Uses: Skin care (Facial care, Facial cleansing, Body care, Baby care); Hand creams, Lotions. Group: Raw Materials; Silicones; Protective Agents; Film Formers Skin Protectants; Softner. Alternative Name: Dimethicone. Grade: Cosmetics. CAS Number: 63148-62-9. Pack Sizes: 1kg, 5 kgs, 10kg, 20kg. | Australia & Worldwide |
| XIAMETER PMX-200 Silicone Fluid, 500cSt | XIAMETER PMX-200 Silicone Fluid, 500cSt is a silicone fluid for foam control and additive applications. XIAMETER PMX-200 Silicone Fluid, 500cSt has the application for a variety of automotive, furniture, metal, and specialty polishes. Ingredient in protective creams, aerosol shave lathers, antiperspirants, and other personal care products and coatings additive, damping fluid, elastomer and plastics lubricant, electrical insulating fluid, mechanical fluid, mold release agent, plastics additive, specialty chemical products ingredient, leather finishing, surface active agent. Group: Personal care ingredients, homecare & institutional cleaning. CAS No. 63148-62-9. Composition: Synthetic. Application: Fabric care, Floor & Surface Cleaner, Car Care. Physical Form: Liquid. Product Code: PIM000043129. | Australia |
| XIAMETER PMX-200 SILICONE FLUID 50CS | It acts as a protecting and de-soaping agent. It is a polydimethylsiloxane fluid and is tasteless, odorless and non-toxic. It imparts soft; velvety skin feel and spreads easily on both skin; hair. It provides ease of application and prevents foaming during rubout. Moreover, it offers ease of buffering, colour enhancement, high water repellence, high compressibility and high shearability without breakdown. It exhibits high spreadability, compatibility, low environmental and fire hazard, low reactivity and vapour pressure, good heat stability and low surface energy. It finds application in formulating hand creams and lotions to form an effective barrier and a more uniform film. Uses: Skin care (Facial care, Facial cleansing, Body care, Baby care) - (Hand creams, Lotions). Group: Raw Materials; Silicones; Protective Agents; Film Formers; De-Soaping Agents; Softner. Alternative Name: Dimethicone. Grade: Cosmetics. CAS Number: 63148-62-9; 9006-65-9; 9016-00-6. Pack Sizes: 1kg, 5 kgs, 10kg, 20kg. Similar to: BRB DM 50 (BRB International). | Australia & Worldwide |
| XIAMETER PMX-200 Silicone Fluid, 50cSt | XIAMETER PMX-200 Silicone Fluid, 50cSt is a silicone fluid for foam control and additive applications. XIAMETER PMX-200 Silicone Fluid, 50cSt has the application for a variety of automotive, furniture, metal, and specialty polishes. Ingredient in protective creams, aerosol shave lathers, antiperspirants, and other personal care products and coatings additive, damping fluid, elastomer and plastics lubricant, electrical insulating fluid, mechanical fluid, mold release agent, plastics additive, specialty chemical products ingredient, leather finishing, surface active agent. Group: Personal care ingredients, homecare & institutional cleaning. CAS No. 63148-62-9. Composition: Synthetic. Application: Fabric care, Floor & Surface Cleaner, Car Care. Physical Form: Liquid. Product Code: PIM000043130. | Australia |
| XIAMETER PMX-200 SILICONE FLUID, 50CST | XIAMETER PMX-200 SILICONE FLUID, 50CST - This high-quality silicone fluid is specifically designed for your pharmaceutical ointments, gels & creams application needs. XIAMETER PMX-200 SILICONE FLUID, 50CST is with a low viscosity of 50cSt, this silicone fluid flows smoothly and evenly, allowing for easy dispersion and blending with other ingredients. It is compatible with a wide range of pharmaceutical formulations, making it a versatile choice for various applications. One of the key advantages of. XIAMETER PMX-200 SILICONE FLUID, 50CST is its exceptional thermal stability. It can withstand a wide range of temperatures without compromising its performance, making it suitable for use in pharmaceutical processes that require high-temperature stability. This ensures that your pharmaceutical formulations maintain their integrity and performance, even in challenging conditions. Furthermore. XIAMETER PMX-200 SILICONE FLUID, 50CST. offers excellent lubrication properties, which can enhance the performance of pharmaceutical formulations. It can reduce friction, improve the spreadability of formulations, and provide a smooth, non-greasy feel, making it ideal for topical pharmaceutical applications. Group: Pharmaceutical ingredients, excipients, animal care, nutraceuticals. CAS No. 63148-62-9. Composition: Polydimethylsiloxane Polymers. Application: Animal Health, Cream-based Ointment, Gel-based Ointment. Function: Skin, NailsHair. Physical Form: Liquid. Product Code: PIM000062544. | Australia |
Our database is helping our users find suppliers everyday.
