Zinc Test Suppliers Australia
Find where to buy products from Australian suppliers, including: distributors, industrial manufacturers, bulk supplies and wholesalers of raw ingredients & finished goods.
Search for products or services, then visit the suppliers website for prices, SDS or more information. You can also view suppliers in NZ, UK or the USA.
Product | Description | |
---|---|---|
KAOLIN CLAY Quick enquiry Where to buy Suppliers range | Kaolin is one of the oldest cosmetic ingredients and is still used extensively, as it has stood the test of time and still produces excellent results. It is a natural claylike mineral (silicate of aluminum) and is composed of silica, iron, magnesium, calcium, sodium, zinc and other minerals. Uses: Skin care products. Group: Personal Care; Cosmetic Raw Materials; Clays; Abrasive; Absorbents; Anticaking Agents; Bulking Agents; Opacifying Agents; Skin Protectants; Slip Modifiers. Alternative Name: Kaolin. Grade: Cosmetic Ingredients. CAS Number: 1332-58-7. Pack Sizes: 1kg, 5 kgs, 10kg, 20kg. | Australia & Worldwide |
KAOLIN LIGHT Quick enquiry Where to buy Suppliers range | Kaolin is one of the oldest cosmetic ingredients and is still used extensively, as it has stood the test of time and still produces excellent results. It is a natural claylike mineral (silicate of aluminum) and is composed of silica, iron, magnesium, calcium, sodium, zinc and other minerals. Uses: Skin care products. Group: Personal Care; Cosmetic Raw Materials; Clays; Abrasive; Absorbents; Anticaking Agents; Bulking Agents; Opacifying Agents; Skin Protectants; Slip Modifiers. Alternative Name: Kaolin. Grade: Cosmetic Ingredients. CAS Number: 1332-58-7. Pack Sizes: 1kg, 5 kgs, 10kg, 20kg. | Australia & Worldwide |
Phosclean Descaler Quick enquiry Where to buy Suppliers range | PHOSCLEAN is an AQIS compliant CIP acid cleaner specifically designed for the removal of scale, rust & precipitates from lines and equipment & tanks in food, beverage & dairy industries. RUST CONVERSION (Metal Priming & Preparation). Remove oil, grease & loose scale with a free rinsing water based alkaline degreaser such as PREDATOR, TRIPLE 2 or MULTISAFE. If necessary strip paint with paint stripper. Once surface is paint & free of loose scale dilute PHOSCLEAN 1:3 with potable water to make standard solution (330mls per Litre). Apply diluted product to surface & allow to dry in order to penetrate deep rust & to leave surface in a suitable condition for painting with an oil based primer. Drying times are variable & are primarily dependent on temperature. Note: PHOSCLEAN requires time to chemically destroy rust & it is not necessary to use expensive rust inhibiting paints. Zinc rich paints are not recommended. PHOSCLEAN like all preventative measures will slow but not stop rust from re-occurring. Treated surfaces left uncoated may experience further rusting or flashing so it is important to paint surfaces soon after surface is ready for painting. SURFACE RUST, BORE STAIN & TARNISHING. Dilute PHOSCLEAN 1:4 with warn potable water to make standard solution (250mls per Litre). Simply submerge the rusty parts, leave for a few minutes & then check until satisfactory. Wipe or wash off on completion. As it is not always possible to soak surfaces in a bath apply diluted PHOSCLEAN to surface with a damp cloth, sponge or fine steel wool & keep wet. Once applied allow time to penetrate & work on surface. If surface is porous, prone to runoff or is alkaline (concrete or limestone) a recoat will almost certainly be necessary. TIP: Remember surfaces took a long time to scale, rust or encrust & the process to remove this also takes time. STAIN REMOVING & GENERAL CLEANING. Dilute up to 1:10 with warm water, however a dilution of 1:4 is recommended for most applications. Apply diluted PHOSCLEAN & allow a few minutes to work & then wipe or hose off. Do not allow to dry. Deeply encrusted stains may need further applications & some slight agitation with a brush or light sourer to promote penetration. Remember to keep the surface wet with product & do not allow to dry as process will halt. TIP: Always pre test an inconspicuous test area before tackling your job. CIP CLEANING. Pre wash using AQIS Alkaline Detergent such as AC222 or Hercules then flush. Then use PHOSCLEAN at a dilution to suit your requiremts (from neat to 1:100). TIP: Always allow up to 5 minutes of contact time to dissolve scale & precipitates. Always rinse food contact surfaces with potable water after use. Always pH adjust waste water to pH 7 with sodium hydroxide before release/ disposal. SITUATIONS TO AVOID IN USE. Avoid contact with Sodium Hypochlorite solutions (bleach), colorbond, anti-fouling paint, marble, anodised or galvanised surfaces & aluminium. Always pre test an inconspicuous test area before tackling your job. Pack Sizes: 5 Litre, 20 Litres, 205 Litre Drums. Product ID: WC861. Chemicals By Industry, Building & Construction, Chemicals By Industry, Food & Beverage Processing, Chemicals By Industry, Hospitality, Chemicals By Industry, Janitorial & Maintenance, Chemicals By Industry, Kitchen, Chemicals By Industry, Marine, Chemicals By Industry, Mining, Chemicals By Industry, Workshop. | Australia Wide |
Plantaserv D (Bulk) Quick enquiry Where to buy Suppliers range | Benefits: Antimicrobial, skin conditioning, viscosity modifying. Applications: Odour Mask, Nature-identical preservative system, skin conditioning (hydrating). Origin: This blend contains nature-identical chemical components that are derived from a range of sources. The plant derived equivalent is Plantaserv C. Solubility: Water Soluble. Heat Stability: Relatively good can be added into your product at temperatures up to 80C. pH range: 4.5-5.5 is ideal but we have had success with products that have pH ranges slightly outside of this (3-6). Always be sure to run Preservative Efficacy Testing before settling on your formulation. Use Level: 3-4%. Do not exceed 4% in your formulation. Microbes Targeted: Broad-Spectrum (Bacteria, Yeast and Mould). Like many natural preservatives, this is slower to act than some of our synthetic options and as such could become overwhelmed in more challenging environments when used as the stand-alone preservative. Some examples of high risk formulations include those containing pigments (Zinc Oxide, Titanium Dioxide, mica, clays etc), those containing herbs or proteins. Group: Preservatives. Alternative Names: Glycerin,Aqua,Levulinic Acid,Sodium Hydroxide,p-Anisic Acid. EINECS: 200-289-5,231-791-2,204-649-2,215-185-5,202-818-5. CAS No. 56-81-5,7732-18-5,123-76-2,1310-73-2,100-09-4. Pack Sizes: 100G; 500G; 1KG; 5KG; 20KG and above upon request. Product ID: RMPVADERMASO. We recommend an evidence-based approach to optimising your product's preservation strategy and as such advise undertaking stability and micro testing to inform your formulating decisions in this area. The only way to be sure that your preservative system is working in your product is to carry out micro testing. While we are happy to pass on information and make theoretical recommendations of how to get the best out of our ingredients we can make no guarantees without this testing. There are two levels of test that a microbiological lab will do - one is a micro count which gives you a 'moment in time' look at the cleanliness of your formula and may also characterise the microbes present. The second is a Preservative Efficacy Test or PET. This is highly recommended as it tests how your product performs over time when it is challenged by microbes. You are legally requir | Worldwide |
Zinc Oxide Quick enquiry Where to buy Suppliers range | Zinc Oxide CNH The Fastest growing distributors of pharmaceutical/veterinary raw materials and finished products. | CNH Enterprise |
Zinc Sulphate Quick enquiry Where to buy Suppliers range | Zinc Sulphate CNH The Fastest growing distributors of pharmaceutical/veterinary raw materials and finished products. | CNH Enterprise |