Chemical Hose suppliers in Australia
Where to buy Chemical Hoses in Australia
We have compiled a list of Chemical Hose suppliers in Australia. If looking for a particular Chemical Hose to purchase, simply use the search box, then use the suppliers website link for more information or prices. The businesses listed that supply Hoses include: manufacturers, distributors, wholesale, industrial, retail and bulk suppliers.
| Product | Description | |
|---|---|---|
| BIOMAX DEGREASER | Biomax WATER-BASED DEGREASER. DESCRIPTION: This super strength water-based degreaser rapidly cleans oil, grease and grime from bilges, engines, bulkheads, compressors, floors and decks. It will help reduce fumes and fire danger. It is non-toxic, non-caustic, non-flammable, biodegradable and solvent-free. Approved by the Dept. of Primary Industry and Energy for use in export registered meat establishments. USES: Bilges: Add 1 - 5 L Biomaxper 25 L bilge water, depending on condition. Leave for up to 12 hours and then flush twice. Engines, Bulkheads, Machinery: Brush on Biomaxundiluted, or mix 1 part to 3 parts with water, depending on the degree of soiling. Then wash clean. General Cleaning: may be used as supplied for heavy soiling, and should be applied by brush in such instances. Allow to penetrate for 1 minute and then hose off with strong jet of water. It may also be diluted and used through pressure washers, steam cleaners and automatic scrubbers. For lighter soiling it may be diluted by up to 1:100 in hot or cold water. SAFETY: Biomaxis not classified as hazardous. Avoid contact with skin and eyes. Keep out of reach of children. Read the Material Safety Data Sheet before. Uses: Cleaning & Maintenance, Industrial Products. Product ID: 74. Categories: Cleaning & Maintenance, Industrial Products. |  Western Australia |
| BOAT WASH | Environmentally Friendly Boat wash. This non-caustic, solvent less degreasing detergent is biodegradable and contains powerful high-foam surface-active agents and emulsifiers for the rapid removal of all types of dirt and grime from all types of surfaces. It is a highly efficient streak-free degreasing cleaner for the hand or machine washing of boats, trailers and other vehicles. It has numerous applications in marine and industrial areas. Boat Wash is water-based and contains no ammonia, caustic or acid ingredients, petroleum hydrocarbons or chlorinated solvents. USE. First hose all loose dirt and mud from surface to be cleaned. For general cleaning use 5-10 mls Boat Wash per litre of water. Clean boats manually or by foam guns. For other hard surfaces, steam cleaners, automatic scrubbers or pressure washers may also be used For severe soil buildup, greater concentrations (up to 50%) may be used, followed by immediate rinsing. Hose off residues thoroughly. To avoid hard water spotting, dry surfaces with soft towel or chamois. May not be suitable for boats with badly weathered, flaking or rusted paintwork. SAFETY. Boat Wash is not classified as hazardous. Read Material Safety Data Sheet before use. Wear protective gloves if skin is sensitive to detergents. Spillages may be slippery. Uses: Marine Products. Product ID: 557. Categories: Marine Products. | Western Australia |
| CITRISAN | ORANGE OIL DEGREASER. DESCRIPTION. This unique non-caustic water and orange-oil based formulation is designed to clean, degrease and sanitise processing equipment, floors , walls and ablution areas, ship bilges and bulkheads, trucks, locos and rolling stock, engines, compressors and workshop equipment, mining machinery, etc. CitriSan contains orange oil, water conditioners, surface-active agents, emulsifiers and sanitisers. USE. For general cleaning, CitriSan may be diluted 1:20 to 1:100 in hot or cold water and used through pressure washers, steam cleaners, automatic scrubbers, or applied by mop and bucket, or as a spray and wipe. CitriSan may be used as -supplied for heavy soiling , and should be applied by brush in such instances. Allow to penetrate for 1 minute and hose off with a strong jet of water. For ships bilges, add 1-5 litres CitriSan per 25 litres bilge water, depending on condition. Leave for upto 12 hours, then flush twice. If used in food processing areas, surfaces should be thoroughly rinsed with potable water. SAFETY: Keep out of reach of children. Avoid contact with skin and eyes. Read Material Safety Data Sheet before use. Uses: Cleaning & Maintenance, Industrial Products, Vehicle Detailing. Product ID: 541. Categories: Cleaning & Maintenance, Industrial Products, Vehicle Detailing. | Western Australia |
| CLEANER AND DEODORISER | Disinfectant and Deodorizer. This unique non-caustic water and orange-oil based formulation is designed to clean, degrease and sanitise processing equipment, floors , walls and ablution areas, ship bilges and bulkheads, trucks, locos and rolling stock, engines, compressors and workshop equipment, mining machinery, etc. This Cleaner and Deodoriser contains orange oil, water conditioners, surface-active agents, emulsifiers and sanitisers. USE. For general cleaning, may be diluted 1:20 to 1:100 in hot or cold water and used through pressure washers, steam cleaners, automatic scrubbers, or applied by mop and bucket, or as a spray and wipe. May be used as supplied for heavy soiling , and should be applied by brush in such instances. Allow to penetrate for 1 minute and hose off with a strong jet of water. For ships bilges, add 1-5 litres per 25 litres bilge water, depending on condition. Leave for up to 12 hours, then flush twice. If used in food processing areas, surfaces should be thoroughly rinsed with potable water. SAFETY. Keep out of reach of children. Avoid contact with skin and eyes. Read Material Safety Data Sheet before use. Uses: Marine Products. Product ID: 552. Categories: Marine Products. | Western Australia |
| Comet - Foaming Cleaner Sanitiser | COMET is an AQIS compliant chlorine-based liquid detergent/sanitiser formulated for use in food and beverage processing areas, live stock abattoirs, refrigeration containers and rooms, kitchens, toilets, shower recesses and laundries. REFRIGERATION CONTAINERS: Use from 1 part product to 20 parts water or as required dilution rates to remove different types of mineral and animal based soils. KITCHENS: For tables, cutting boards, bench-tops, tiled and stone floors, wash with COMET at 1:50 dilution. Leave for 5 - 10 minutes then rinse. BATHROOMS: COMET may be used to clean mould, soap scum, etc. from shower recesses and surrounding areas. Apply at 1:20 dilutions to the surface, leave for 5 minutes then rinse clean, using a brush if necessary. Ensure adequate ventilation in confined areas. ALGAE AND SLIME REMOVAL: For removing algae and mould from concrete, mortar and roof tiles, use 1 part COMET per 20 parts of water. Apply liberally to the surface and leave for at least 30 minutes. Brush off dead algae and hose with water. LAUNDRY: For bleaching, white clothes, immerse in a 1:500 solution of COMET (2ml per litre). Soak for 2 - 3 hours or overnight, then rinse then wash. For baby nappies, remove soils matter and soak for 2 hours in COMET at 1:100 dilutions. Rinse, then wash. Pack Sizes: 5 Litre, 20 Litres, 205 Litre Drums, 1000 Litres. Product ID: WC420. Chemicals By Industry, Abattoir, Chemicals By Industry, Food & Beverage Processing, Chemicals By Industry, Janitorial & Maintenance, Chemicals By Industry, Kitchen, Chemicals By Industry, Pools & Recreation. |  Australia Wide |
| Comet Green | COMET GREEN is an AQIS compliant chlorine-based liquid detergent/sanitiser formulated for use in food and beverage processing areas, live stock abattoirs, refrigeration containers and rooms, fruit & vegetable processing, toilets, shower recesses and laundries. FRUIT & VEGETABLE PROCESSING: For manual cleaning use COMET GREEN at between 2 and 5% with cold water. That is 2 mls / litre of water or 50:1 or 50mls / litre or 20:1. Agitate surfaces and allow up to 3 minutes contact time and rinse with potable water. If the use of a quaternary ammonium compound is required thorough rinsing of all surfaces is critical between the two applications. REFRIGERATION ROOMS & VEHICLES: Use from 1 part product to 20 parts water or as required dilution rates to remove different types of mineral and animal based soils. FOOD PREPARATION / SHIP GALLIES: For tables, cutting boards, bench-tops, tiled and stone floors, wash with COMET GREEN at 1:50 dilution. Leave for 5 - 10 minutes then rinse. BATHROOMS & SHOWERS: COMET GREEN may be used to clean mould, soap scum, etc. from shower recesses and surrounding areas. Apply at 1:20 dilutions to the surface, leave for 5 minutes then rinse clean, using a brush if necessary. Ensure adequate ventilation in confined areas. ALGAE, FUNGI AND MOULD: For removing algae and mould from concrete, mortar and roof tiles, use 1 part COMET GREEN per 20 parts of water. Apply liberally to the surface and leave for at least 30 minutes. Brush off dead algae and hose with water. LAUNDRIES: For bleaching, white clothes, immerse in a 1:500 solution of COMET GREEN (2ml per litre). Soak for 2 - 3 hours or overnight, then rinse then wash. For baby nappies, remove soils matter and soak. Pack Sizes: 5 Litre, 20 Litres, 205 Litre Drums, 1000 Litres. Product ID: WC421. Chemicals By Industry, Food & Beverage Processing. | Australia Wide |
| COOL FLUSH | Cool Flush is a specially formulated liquid for removing sludge, grease and scale from radiators and engine water jackets. Cool Flush is non-acidic , solvent less and biodegradable and is safe to use on both cast iron and aluminium alloy. It will not adversely affect water pump seals or radiator hoses. Uses: Cooling Systems. Product ID: 79. Categories: Cooling Systems. | Western Australia |
| Cooling System StopLeak | Cooling System StopLeak: Provides temporary repair of radiator leaks and seepage from radiator hoses and gaskets, and reduces loss of coolant from the cooling system. Contains lubricating heat-sensitive synthetic polymers and is free from abrasive mineral fibres. Categories: Mechanical, Automotive Products, Radiator Fluids | Western Australia |
| COOLING SYSTEM STOP LEAK | Cooling System StopLeak is a specially formulated liquid designed to provide temporary repair of radiator leaks and seepage from radiator hoses and gaskets, and to reduce the loss of coolant from the cooling system. Cooling System StopLeak contains lubricating heat-sensitive synthetic polymers and is free from abrasive mineral fibres. Uses: Cooling Systems. Product ID: 178. Categories: Cooling Systems. | Western Australia |
| Degreaser Concentrate | A highly concentrated degreaser suitable for all heavy degreasing operations, particularly earth moving and transport equipment. Also effective for solvent based parts washer. Spray and leave to penetrate and rinse with a high pressure hose. Uses: Degreasing, Parts Washer, Heavy Duty Cleaner. Group: Workshop Supplies, Mining & Industrial. Alternative Names: White Spirits, Degreaser, Solvent. CAS No. 64742-82-1. Pack Sizes: 200L, 20L, 5L, 1L. |  |
| ENGINE AND BILGE CLEANER | WATER-BASED DEGREASER. This super strength water-based degreaser rapidly cleans oil, grease and grime from bilges, engines, bulkheads, compressors, floors and decks. It will help reduce fumes and fire danger. It is non-toxic, non-caustic, non-flammable, biodegradable and solvent-free. USE. Bilges: Add 1 - 5 L Engine and Bilge Cleaner per 25 L bilge water, depending on condition. Leave for up to 12 hours and then flush twice. Engines, Bulkheads, Machinery: Brush on Engine and Bilge Cleaner undiluted, or mix 1 part to 3 parts with water, depending on the degree of soiling. Then wash clean. General Cleaning: may be used as supplied for heavy soiling, and should be applied by brush in such instances. Allow to penetrate for 1 minute and then hose off with strong jet of water. It may also be diluted and used through pressure washers, steam cleaners and automatic scrubbers. For lighter soiling it may be diluted by up to 1:100 in hot or cold water. SAFETY. Engine and Bilge Cleaner is not classified as hazardous. Avoid contact with skin and eyes. Keep out of reach of children. Read the Material Safety Data Sheet before use. Uses: Marine Products. Product ID: 555. Categories: Marine Products. | Western Australia |
| Foam Chlor - Chlorine Sanitiser | FOAM CHLOR is chlorine-based liquid detergent/sanitiser formulated. REFRIGERATION CONTAINERS: Use from 1 part product to 20 parts water or as required dilution rates to remove different types of mineral and animal based soils. KITCHENS: For tables, cutting boards, bench-tops, tiled and stone floors, wash with FOAM CHLOR at 1:50 dilution. Leave for 5 - 10 minutes then rinse. BATHROOMS: FOAM CHLOR may be used to clean mould, soap scum, etc. from shower recesses and surrounding areas. Apply at 1:20 dilutions to the surface, leave for 5 minutes then rinse clean, using a brush if necessary. Ensure adequate ventilation in confined areas. ALGAE AND SLIME REMOVAL: For removing algae and mould from concrete, mortar and roof tiles, use 1 part FOAM CHLOR per 20 parts of water. Apply liberally to the surface and leave for at least 30 minutes. Brush off dead algae and hose with water. LAUNDRY: For bleaching, white clothes, immerse in a 1:500 solution of FOAM CHLOR (2ml per litre). Soak for 2 - 3 hours or overnight, then rinse then wash. For baby nappies, remove soils matter and soak for 2 hours in FOAM CHLOR at 1:100 dilutions. Pack Sizes: 5 Litre, 20 Litres, 205 Litre Drums. Product ID: AC410. Chemicals By Industry, Food & Beverage Processing. | Australia Wide |
| Glisten - Car Shampoo & Shine | GLISTEN is a multi-purpose neutral based detergent suitable for the combined cleaning & shining of vehicles, floors, benches and many other hard surfaces. Commonly used in car wash applications as the main foaming brush cleaner as it provides a mild clean, high sudsing and leaves a good shine behind. Dilute GLISTEN at 10 - 20 mls per litre (1 -2 %) of hot or cold water depending on the degree of contamination. Apply with a soft sponge, mop or broom, agitate then hose off with clean water. This product when used with 40mls of ANTIFOAM per each 200ltrs of machine tank solution is suitable for use in floor scrubbing machines. GLISTEN can also be applied by foaming units. If your company is a large user of cleaning chemicals ask your Able Westchem representative about free-on-loan equipment. Pack Sizes: 5 Litre, 20 Litres, 205 Litre Drums, 1000 Litres. Product ID: WC646. Chemicals By Industry, Automotive. | Australia Wide |
| GREASE LIFTER | Solvent Based Degreaser. Description. This is a powerful blend of solvents and emulsifying surfactants designed for cleaning, dispersing and degreasing operations by soak, spray or brush application. It has the following features: Low flammability (high flash point). Safe on all metals. Will not damage paintwork when used as directed. Rinses off easily in cold water (even seawater). Rapidly dissolves most oils, greases, lubricants etc. Low evaporation rate. Low electrical conductivity. Contains no chlorinated solvents. Grease Lifter is ideal for general clean-up operations on engines, heavy machinery, compressors and workshop equipment, floors and driveways. It is suitable for cleaning bilges and tanks, and for treating oil spills on decks and piers. Grease Lifter is recommended as a pre-cleaning detergent prior to alkaline cleansing or decarbonising operations. It can also be used for dewaxing vehicles and spot cleaning and degreasing of painted surfaces, providing there is an immediate cold water rinse afterward. Use. For heavy soiling, apply by brush allowing Grease Lifter to penetrate for 1-2 minutes, then hose off with a strong jet of water. Safety. Grease Lifter contains hydrocarbon solvents. Read Material Safety Data Sheet before use. Prolonged exposure to the skin may remove natural fats and cause irritation. Avoid contact with eyes, and inhalation of spray mist. Uses: Industrial Products. Product ID: 544. Categories: Industrial Products. | Western Australia |
| LAUNDRY LIQUID | LAUNDRY LIQUID & MULTIPURPOSE DETERGENT. DESCRIPTION. This is a premium quality product, specially formulated to be environmentally friendly whilst retaining optimum cleaning efficiency. Biodegradable. Contains no phosphates. Contains no synthetic dyes, fragrances or thickeners. Contains no caustic ingredients. Compatible with hard water. Free flowing for easier pouring. Suitable for hot or cold washing. Has many other uses (see below). USE. Laundry Washing . Light-Med Soiling Heavy Soiling. Large toploading automatics 50 ml 100 ml. Medium toploading automatics 40 ml 80 ml. Twin Tubs etc. 25 ml 50 ml. A little may be applied undiluted to stains immediately prior to the wash, or it may used for presoaking at up to 50-80 ml per 10 litres water. Suitable for all fabrics except wool or silk. Floor Mopping. Add 20-40 ml per 10 litre bucket of cold or warm water. Apply by mop or sponge. Suitable for all vinyl and tiled floors. Glass and Window Cleaning. Mix 5ml with 200ml methylated spirits and 300ml water. Spray on mirrors, windows or other glass surfaces; wipe off with lint-free cloth or paper towelling. Spray and Wipe Cleaning. Mix 25ml with 200ml methylated spirits and 300ml water. For effective cleaning and degreasing of kitchen and other hard surface areas, spray on and wipe off. Car Washing. Add 25-50ml per 10 litre bucket of cold water. Apply by chamois or soft sponge and hose off thoroughly. Avoid washing car in direct sunlight. Degreasing. Dilute 50:50 in kerosene and stir or shake well just prior to use. Suitable for cleaning and degreasing car engines, lawn mowers, machinery etc. Apply by (e.g.) paintbrush, allow several minutes to penetrate and hose clean. Safety. Keep out of reach from children. Uses: Cleaning & Maintenance. Product ID: 503. Categories: Cleaning & Maintenance. | Western Australia |
| Phosclean Descaler | PHOSCLEAN is an AQIS compliant CIP acid cleaner specifically designed for the removal of scale, rust & precipitates from lines and equipment & tanks in food, beverage & dairy industries. RUST CONVERSION (Metal Priming & Preparation). Remove oil, grease & loose scale with a free rinsing water based alkaline degreaser such as PREDATOR, TRIPLE 2 or ... STAIN REMOVING & GENERAL CLEANING. Dilute up to 1:10 with warm water, however a dilution of 1:4 is recommended for most applications. Apply diluted PHOSCLEAN & allow a few minutes to work & then wipe or hose off. Do not allow to dry. Deeply encrusted stains may need further applications & some slight agitation with a brush or light sourer to promote penetration. Remember to keep the surface wet with product & do not allow to dry as process will halt. TIP: Always pre test an inconspicuous test area before tackling your job. CIP CLEANING. Pre wash using AQIS Alkaline Detergent such as AC222 or Hercules then flush. Then use PHOSCLEAN at a dilution to suit your requiremts (from neat to 1:100). TIP: Always allow up to 5 minutes of contact time to dissolve scale & precipitates. Always rinse food contact surfaces with potable water after use. Always pH adjust waste water to pH 7 with sodium hydroxide before release/ disposal. SITUATIONS TO AVOID IN USE. Avoid contact with Sodium Hypochlorite solutions (bleach), colorbond, anti-fouling paint, marble, anodised or galvanised surfaces & aluminium. Always pre test an inconspicuous test area before tackling your job. Pack Sizes: 5 Litre, 20 Litres, 205 Litre Drums. Product ID: WC861. Chemicals By Industry, Building & Construction, Chemicals By Industry, Food & Beverage Processing, Chemicals By Industry, Hospitality, Chemicals By Industry, Janitorial & Maintenance, Chemicals By Industry, Kitchen, Chemicals By Industry, Marine, Chemicals By Industry, Mining, Chemicals By Industry, Workshop. | Australia Wide |
| POWEROIL® OPAL M-150 | POWEROIL OPAL M-150 is a processing oil formulated from carefully selected Severely Hydro treated Heavy Paraffinic Oil. POWEROIL OPAL M-150 appear as a clear liquid, it is a high-quality lubricants to use in a wide range of applications: Manufacturing of Thermoplastic Compounds (SBCs, TPV-& TPOs), Manufacturing of Automotive components, Extruded Profiles, Manufacturing of Tube, Hoses, and Weather strips, Manufacturing of electronics handles, Toothbrush Grips, Light coloured non-black Foot Wear products, molded products. Group: Specialty chemicals, electronic & specialties, polymers. CAS No. 64742- 53- 6, 64742- 55- 8. Composition: Hydrotreated light naphthenic distillate, Distillates, petroleum, hydrotreated light paraffinic. Application: Thermoplastic Transformers, Masterbatch & Compounders. Physical Form: Liquid. Product Code: PIM000031746. |  Australia |
| Result - Degreasing Powder | RESULT is a general purpose non-caustic detergent powder for heavy duty cleaning of floors, walls and equipment. RESULT is an ideal product for maintenance and heavy duty cleaning in kitchens, workshops, garages and food processing areas etc - anywhere there is heavy dirt, grease and grime to be removed. RESULT can be used with safety on virtually any hard surface. It will not harm "soft" metals such as tin and aluminum and is a brilliant cleaner for kitchen vent filters. For normal cleaning operation, scrub with a solution of 1 cup of RESULT per bucket of hot water. Rinse with clean water. On very heavily soiled floors, wet the surface and sprinkle RESULT over it. Allow to soak for several minutes, then scrub with a deck broom and hose off. For cleaning vent filters, make up a bath solution of 4 cups RESULT per sink of warm to hot water. Immerse the filters in this solution and allow too soak for at least 1 hour. Remove filters from the soak tank and rinse thoroughly with water. Pack Sizes: 5KG, 20KG. Product ID: WC960. Chemicals By Industry, Kitchen, Chemicals By Industry, Workshop. | Australia Wide |
| Sanvert - Rust Converter & Passivator | SANVERT is clear mobile liquid which when applied to rust or bore stains removes the rust and leaves a protective coating when rinsed off with fresh water (inhibited). SANVERT can be used for the removal of rust stains on fishing boats, ships, platforms, trailers, marine equipment, blending and mixing tanks, metal tools etc. SANVERT can also be used as a porcelain and tile cleaner to remove hard water scales. Spray neat directly onto affected areas. Apply with brush to more severely affected areas. Leave it on for 10 to 15 minutes. Wash off with pressure hose. SANVERT will quickly remove surface rust stains and convert the residual rust into a protective phosphate coating. Once the surface is dry, a primer and/or overcoat/s can be applied if required. Pack Sizes: 5 Litre, 20 Litres, 205 Litre Drums. Product ID: SC830. Chemicals By Industry, Marine, Chemicals By Industry, Workshop. | Australia Wide |
| SKYPRENE® Y30 SLICED | SKYPRENE® Y30 SLICED is a general purpose, mercaptan-modified chloroprene rubber (CR) with a small chip size. Exhibits good crystallization- & heat resistance, tack retention time, high viscosity and good crystallization rate. Offers tear strength, tensile strength with high mooney viscosity which reduces production cost and makes it possible to use a large amount of filler. SKYPRENE® Y-30 can be used to blend with other grades to improve processability. SKYPRENE® Y30 SLICED is recommeded to use in automotive rubber parts, industrial rubber parts, belts, hoses, rolls, anti-vibration parts, electrical wire & cables and adhesive applications. Please see the brochure below and for further details contact our local sales representative today. Group: Specialty chemicals, electronic & specialties, paints & coatings, polymers. Composition: Butadiene Rubber. Application: Thermosets & Composites, Rubber & Elastomers. Function: POLYMERS, Butyl Rubber. Physical Form: Solid. Product Code: PIM000046539. | Australia |
| Solvent Decarboniser | SOLVENT DECARBONISER - AC635 is a yellow mobile liquid consisting of two phases with a thin top aqueous phase and a bottom solvent phase for soak bath cleaning. It is ideal for use to decarbonise carburettors, automotive engine parts, gears etc where they can be readily left immersed in a solvent bath. AC635 is tipped directly into a suitable metal container without any dilution to act as a bath. The size of the bath is dependent on the number and the size of the parts to be cleaned. Parts must be totally immersed in the AC635 bath. The bath should not be agitated and be positioned in a cool well ventilated area. It is recommended that the parts be pre-cleaned before introducing them into the bath. They should be left soaking until the soils become loosen. The parts are then removed and hosed down with water. The AC635 bath can be used repeatedly until it shows obvious signs of lack of stripping ability. Pack Sizes: 20 Litres. Product ID: AC635. Chemicals By Industry, Workshop. | Australia Wide |
| Epoxy & Two Pack Stripper | EPOXY & TWO PACK STRIPPER - AC805 is a viscous mobile solvent gel formulated to remove carbon, rubber, resin, paint and varnish from bricks, stone and metal surfaces, including ferrous metals and alloys. This product has a limited shelf life on the gelling component. Apply a liberal amount of AC805 directly onto the surface with a paint brush. Allow 10-15 minutes contact time for the product to penetrate and soften the coating. Finally, clean the surface by scraping or hosing off with water. Dry the surface and apply as before. Pack Sizes: 5 Litre, 20 Litres. Product ID: AC805. Chemicals By Industry, Brick & Concrete Cleaning, Chemicals By Industry, Building & Construction, Chemicals By Industry, Marine. | Australia Wide |
| Graffiti Remover & Paint Stripper | GRAFFITI REMOVER & PAINT STRIPPER - AC800 is a viscous mobile solvent gel formulated to remove carbon, rubber, resin, paint and varnish from bricks, stone and metal surfaces, including ferrous metals and alloys. Apply a liberal amount of AC800 directly onto the surface with a paint brush. Allow 10-15 minutes contact time for the product to penetrate and soften the coating. Finally, clean the surface by scraping or hosing off with water. Some stubborn coatings and residue films may require a second application of AC800. Dry the surface and apply as before. Pack Sizes: 5 Litre, 20 Litres, 205 Litre Drums. Product ID: AC800. Chemicals By Industry, Brick & Concrete Cleaning, Chemicals By Industry, Building & Construction. | Australia Wide |
Would you like to list your products on Australian Chemical Suppliers?
Our database is helping our users find suppliers everyday.