Chemical Pumps suppliers in Australia
Where to buy Chemical Pumps in Australia
We have compiled a list of Chemical Pump suppliers in Australia. If looking for a particular Chemical Pump to purchase, simply use the search box, then use the suppliers website link for more information or prices. The businesses listed that supply Chemical Pumps include: manufacturers, distributors, wholesale, industrial, retail and bulk suppliers.
| Product | Description | |
|---|---|---|
| EDCA - Dry Penetrating Acid for Bore Water. This Dry Penetrating Acid new Bore Water Treatment Chemical has been formulated to remove iron bacteria and the resultant rusty iron oxide residue. It has shown enhanced removal of the sludge in pumps and piping systems. It is easy to use and is transported as non-hazardous goods. | FEATURES: removes iron bacteria and rusty iron oxide residues, controls iron bacteria in water bores. Sizes available: 20 litre - 205 Litre Drums. CHEMDREX CHEMICALS: Water Treatment Chemicals dedicated to finding solutions to the problems encountered by groundwater users. Bore Water Quality Solutions. Categories: Iron Oxide Bacteria Remover, Iron Bacteria Solutions, Water Bore Cleaning Chemicals. promo |  Nationwide |
| EDCA - Dry Penetrating Acid for Bore Water. This Dry Penetrating Acid new Bore Water Treatment Chemical has been formulated to remove iron bacteria and the resultant rusty iron oxide residue. It has shown enhanced removal of the sludge in pumps and piping systems. It is easy to use and is transported as non-hazardous goods. | FEATURES: removes iron bacteria and rusty iron oxide residues, controls iron bacteria in water bores. Sizes available: 20 litre - 205 Litre Drums. CHEMDREX CHEMICALS: Water Treatment Chemicals dedicated to finding solutions to the problems encountered by groundwater users. Bore Water Quality Solutions. Categories: Iron Oxide Bacteria Remover, Iron Bacteria Solutions, Wells & Bore Water Treatment Cleaners, Well Drillers, Water Bore Cleaning Chemicals | Nationwide |
| Aqua-Soil Wetter | AQUA-SOIL is non bio accumulative and affords medium-to-long term wetting of hydrophobic and super hydrophobic surface soils in many outback/mining locations through out Australia. Application Considerations: Typical usage rates range from 10 to 30 litres per hectare. Dilute 1 Litre of AQUA-SOIL per 200 Litres of water and apply by irrigation system or spray truck. Dilutions may alter depending on available water hardness and or the type of hydrophobic soils. Chemical dosing pumps may be installed at water filling stations. Pack Sizes: 5 Litre, 20 Litres, 205 Litre Drums, 1000 Litres. Product ID: WC900. Chemicals By Industry, Universal Products. |  Australia Wide |
| ASCA-200 - Cleaning & Developing Water Bores. Developed to overcome many of the problems encountered in cleaning & developing water bores. | ASCA-200 is a liquid concentrated admixture. It is non-toxic, non-corrosive and non-flammable. Contains no phosphates or sterilisers. USES: Speeds up the development of new water bores. In rotary water bores, more mud cake can be removed than ever thought possible before. Water production increases with less development time. FEATURES: Aids, controls & removes soft iron oxide, bacteria, calcium and magnesium salts from the water bearing formations, bore screens, casings and pumps. Increased water production, Improves bore development by bringing muddy water through the screen and keeping the fines in that water in suspension for pump out. It does not allow clogging or build-up of fines in the formation. Sizes available: 20 litre - 205 Litre Drums. CHEMDREX CHEMICALS: Water Treatment Chemicals dedicated to finding removal solutions to the problems encountered by groundwater users. Bore Water Quality Solutions. Categories: Water Bore Redevelopers, Wells & Bore Water Treatment Products, Water Bore Cleaning Chemicals, Well Drillers, Water Bore Pump Cleaners | Nationwide |
| Bio Dine - Iodine Disinfectant | BIO DINE is an iodine based concentrate (an Iodophore) used to control a broad spectrum of bacteria, mould & fungi in intensive animal husbandry environments and brewing industry. BIO DINE is also used for foot baths in the beauty care industry. GENERAL HARD SURFACES & EQUIPMENT. (Non Porous) 3mL and (Porous) 6mL of BIO DINE per litre of water. Introduce BIO-DINE into cleaning system water using venturies, dosing pumps or by manual dosing. Spray all surfaces to ensure complete coverage. Allow two minutes contact time to work. If surface does not come into direct contact with food sources there is no need to rinse. If chemical is used on a food contact surface rinse with potable water. DOSE FOGGING. To help reduce bacterial growth and odours. 12 ml per litre of fogging water (1.25%). NOTE: - 1.25 litres of diluted BIO DINE doses 100 sqm of shedding. At prescribed rate animals can be directly misted or fogged without removing. Introduce BIO DINE into sheds using regular cooling/ fogging system or mobile purpose built mobile foggers Tip for convection poultry sheds apply at end of daily fogging to increase effectiveness. SHEDDING & FLOORS (excluding drinking & feeding equipment). Pack Sizes: 5 Litre, 20 Litres. Product ID: WC8610. Chemicals By Industry, Abattoir, Chemicals By Industry, Food & Beverage Processing. | Australia Wide |
| Blubac gold | Blubac is a powerful organic acid that kills iron bacteria and dissolves iron, calcium and manganese and other mineral scale build up. It is used as a water bore cleaner, also for cleaning out screens, pumps and irrigation pipes. This is an Australian manufactured product. A great addition to the water treatment range. Uses: Organic acids. Pack Sizes: 1000 litres. Categories: Water Treatment Chemicals. |  Balcatta WA |
| Bore Stain Begone - Heavy duty bore stain remover | BORE STAIN BEGONE is a new and improved more powerful liquid formula designed to clean bore stains from most surfaces such as masonry, brick works, vehicles and bore pumps. Bore Stain Begone is an environmentally friendly biodegradable product. Pack Sizes: 5 Litre, 20 Litres. Product ID: AC1161. Chemicals By Industry, Brick & Concrete Cleaning, Chemicals By Industry, Building & Construction. | Australia Wide |
| COOL MAX 100 | This is a general purpose ready to use glycol based treatment for automotive cooling systems. Freezing point is -35 degrees C approx at 50% dilution and -15 degrees C at 35% dilution. Replace at 24 month / 60,000 km intervals. May be replaced more frequently depending on engine and driving conditions. Top up radiator as required to avoid rundown in concentration. This product contains a pH-buffered blend of additives known to reduce the corrosion of steel, cast iron, aluminium alloy, brass, copper and solder. This product exceeds the performance requirements of the following standards when assessed in hard water and is made to General Motors Specification HN 2043. ASTM D1384 " Corrosion Test for Engine Coolants in Glassware.". ASTM D4340 "Corrosion of Cast Aluminium Alloys in Engine Coolants Under Heat Rejecting Conditions.". ASTM D2570 "Simulated Service Corrosion Test for Engine Coolants.". ASTM D2809 "Cavitation Corrosion and Erosion Corrosion Characteristics of Aluminium Pumps With Engine Coolants.". Australian/New Zealand Standard 2108.1:1997 "Engine Coolants Type A and Type B for Engine Cooling Systems.". This product will not reverse pre-existing corrosion problems, and should not be used in conflict with engine manufacturer's recommendations. Uses: Cooling Systems. Product ID: 229. Categories: Cooling Systems. |  Western Australia |
| COOL MAX 50 | COOL MAX 50 general purpose concentrated glycol based treatment for automotive cooling systems. Freezing point is -35 degrees C approx. Replace at 24 month / 60,000 km intervals. May be replaced more frequently depending on engine and driving conditions. This product contains a pH-buffered blend of additives known to reduce the corrosion of steel, cast iron, aluminium alloy, brass, copper and solder. It exceeds the performance requirements of the following standards when assessed in hard water and is made to General Motors Specification HN 2043. ASTM D1384 " Corrosion Test for Engine Coolants in Glassware.". ASTM D4340 "Corrosion of Cast Aluminium Alloys in Engine Coolants Under Heat Rejecting Conditions.". ASTM D2570 "Simulated Service Corrosion Test for Engine Coolants.". ASTM D2809 "Cavitation Corrosion and Erosion Corrosion Characteristics of Aluminium Pumps With Engine Coolants.". Australian/New Zealand Standard 2108.1:1997 "Engine Coolants Type A and Type B for Engine Cooling Systems.". This product will not reverse pre-existing corrosion problems, and should not be used in conflict with engine manufacturer's recommendations. Uses: Cooling Systems. Product ID: 221. Categories: Cooling Systems. | Western Australia |
| Ecosan - Cleaner & Degreaser | ECOSAN is a quick-breaking cleaner and degreasing disinfectant. It is an environmentally responsible option for degreasing, general cleaning, and disinfecting in the automotive, maritime, mining and resource industries. ECOSAN is safe on most surfaces not harmed by water alone; use ECOSAN with confidence on trucks, tankers, rigs, platforms, engines, plastics, steel, aluminium, painted surfaces, concrete and glass. Apply ECOSAN by hand, ventures, positive displacement pumps, high pressure cleaners, foaming units, mop and bucket, or spray directly onto surfaces using trigger sprays or pressure packs. DEGREASING: se as received or dilute 50/50 with warm water. Spray or brush onto contaminated surface. Allow two minutes soak time. Depending on soil contamination, some surfaces may require agitation prior to flushing or blasting off with water. For best results use hot or warm water to flush. ENERAL HARD SURFACE CLEANING: ECOSAN is versatile and may be used at dilutions ranging from 1:10 for extra heavy deposits and spot cleaning, to 1:100 for light duty cleaning applications. Use on cars, rigs, floor, benches etc. DISINFECTING & ODOUR: Use ECOSAN at a solution no weaker than 1:100 which is suitable for light duty disinfecting & cleaning of floors, wall, tiles etc. For extra heavy deposits and spot disinfecting use 1:10 with water. SOAK CLEANING: Use at rate of 1:20 with water. Immerse equipment in the solution, scrub with brush and rinse. Use a spray gun for spot cleaning or machine and or mop and bucket for floor cleaning. Always follow with a clean water rinse. Pack Sizes: 5 Litre, 20 Litres, 205 Litre Drums. Product ID: AC607. Chemicals By Industry, Marine, Chemicals By Industry, Mining. | Australia Wide |
| LIVEO PHARMA 80 TUBING | LIVEO PHARMA 80 TUBING is a high-quality pharmaceutical-grade silicone tubing designed for use in a variety of applications, including peristaltic pumps, transfer and filtration systems, and bioreactors. This tubing is made from a biocompatible silicone material that is odorless, tasteless, and non-toxic, making it ideal for use in medical and pharmaceutical applications. With a durometer rating of 80 Shore A, LLIVEO PHARMA 80 TUBING offers excellent flexibility and resistance to kinking, making it easy to handle and install. It is also highly resistant to chemicals, including acids, alkalis, and organic solvents, and can withstand high temperatures up to 200°C. LIVEO PHARMA 80 TUBING is an excellent choice for your pharmaceutical and biopharmaceutical needs. Its high-quality construction and superior performance make it a reliable and cost-effective solution for your fluid transfer needs. Group: Pharmaceutical ingredients, packing materials. Composition: Silicone Elastomer. Application: Primary Packaging. Physical Form: Solid. Product Code: PIM000060484. |  Australia |
| Lubrasol - Conveyor Belt Lube | LUBRASOL is a concentrated liquid synthetic lubricant/cleaner based on amine compounds with excellent bacteriostatic properties. LUBRASOL is specifically developed for use on conveyor systems within the brewing, beverage and food processing industries. LUBASOL is a PET approved chain lubricant for slow or fast bottling and can lines. Best results are obtained by automatically diluting Lubranol SN with water to a concentration of 1:300 to 1:400 (0.33 to 3.25%v/v) and distributing on the line by a manifold system. NOTE: when changing from a soap base lubricant to LUBRASOL it is important that all lines, nozzles and pumps should be thoroughly flushed with water prior to use. Contact between the cationic components of LUBRASOL and soap based lubricants may result in precipitation of insoluble deposits. Refer to the information listed in the SDS before using this product. Pack Sizes: 5 Litre, 20 Litres. Product ID: AC155. Chemicals By Industry, Brewing\, Distillery & Winery, Chemicals By Industry, Food & Beverage Processing. | Australia Wide |
| PU OIL Protech Tractrans Universal- 10W30 Agritrans | Protech TRAC TRANS UNIVERSAL. PROTECH Trac Trans Universal A universal tractor transmission oil, TTU is ideally suited to agricultural. and industrial equipment operating under severe load conditions, .... PTO clutches and bearings. Meets the strict requirements of Cat TO-2 and. Allison C-4 specification. Minimises wet brake chatter. Offers maximum performance at low and high. temperatures. Provides superior gear performance and. minimises wear and noise in Sundstrand pumps. Highly shear stable. Provides extended fluid and performance life. under the most arduous conditions. Approvals/ Recommendations. API: GL-4 B5 John Deere J20C /J20D (supersedes. Case New Holland MAT 3505/3525/3526 J20A /J20B / J14A/J14B /JTD303 /J121A). Clark Lift Truck TA 12, TA 18, HR 500,HR 600 Allison C-4/C-3/C-2. Deutz: HTF Caterpillar TO-2 (Obsolete). Ford New Holland A-2-C-200/A-2-C-201 Dresser Fiat-Hesston AF-87. Kubota Denison HF-0/HF-1/HF2. Landini Tractor Hydraulic Fluid Komatsu. Steiger HTF (SEMS 17001) UDT Fluid & Super UDT. Renk Doromat 873/874A/874B Bus ATF Oliver Type 55 Q-1802. Volvo- VCE 1273.03 and WB101 Versatile Gear & HTF 23M/24M. ESN M2C 86B & C/134A/134B/134C/134D/ Sperry Vickers/Eaton:1-286-S & M2950. 77A/86A/86C/41B/43/48B/48C/53A/53B/142A/ Volvo- VCE 1273.03 and WB101. 143/92A/159A/ 159B/159C Chalmers Power Fluid PF-821 XL/257541 &. ICH B-5 (International Harvester) / B-6(HyTran) 246634 HTF. JI Case MS-1204-1206(PowerGard PFT) / Deutz-Allis: 25743/. 1207 (HyTran Plus) /1208 & 1209 Danfoss Hydro Static Trans Fluid. (HyTran Ultra) /1210/1216/1230/1317/143~5. (TCH Fluid) /185 (TFD Fluid) /. Uses: Performance Oils. Product ID: 339. Categories: Performance Oils. | Western Australia |
| Slip - Oil Antiwear Additive | Slip - Oil Antiwear Additive: Special blend of surface modifying lubricants and anti-corrosion agents designed specifically to reduce metal to metal friction between all moving parts in engines (inc 2-stroke ), gearboxes, differentials (except limited slip), bearings pumps etc. Categories: Industrial, Mechanical, Agricultural, Marine, Anti Wear Lubricants | Western Australia |
| SLIP OIL CONDITIONER | SLIP OIL ANTIWEAR ADDITIVE. DESCRIPTION. Slip Oil Antiwear Additive is a special blend of surface modifying lubricants and anticorrosion agents designed specifically to reduce metal to metal friction between all moving parts. It provides the following benefits: * Reduces friction. Reduces metal wear. Reduces oil temperature. Prolongs oil life. Reduces fuel consumption. Promotes smoother engine operation. Resists corrosion. Resists harmful crankcase gases. Reduces maintenance costs. Increases power output. Extends cutting tool life. DIRECTIONS. Slip is suitable for use in engines (including 2-stroke engines), gearboxes, differentials (except limited slip differentials), bearings, pumps, etc. Add 60 mls Slip Oil Antiwear Additive per litre of engine, gear or differential oil at each oil change. Use 40 mls per litre in bearing grease, pump oil, etc. Slip may be used undiluted with excellent results in machine shops, for general drilling, tapping, punching, threading and broaching, and for low or high sped lathe work. It is suitable for use on bits, blades, lathe tools and hole saws. By reducing friction Slip reduces cutting tool temperatures and extends tool life substantially. SAFETY. Slip is not classified as hazardous. Read Material Safety Data Sheet before use. Keep out of reach of children. Spillages may be slippery. PROPERTIES. Appearance: Oily amber liquid. pH: Neutral. Specific Gravity: Approx. 1.25. % Solids: > 98%. Boiling Point: > 200oC. Flash Point: > 200oC. Flammability: Non flammable. Corrosivity: Non corrosive. Toxicity: Non toxic. Application: 3-6% in engine & machinery lubricants. Neat for lathe work,tapping etc. Uses: Fuel & Oil Treatments. Product ID: 214. Categories: Fuel & Oil Treatments. | Western Australia |
Would you like to list your products on Australian Chemical Suppliers?
Our database is helping our users find suppliers everyday.