Find where to buy products from Australian suppliers, including: distributors, industrial manufacturers, bulk supplies and wholesalers of raw ingredients & finished goods.
Search for products or services, then visit the suppliers website for prices, SDS or more information. You can also view suppliers in NZ, UK or the USA.
| Product | Description | |
|---|---|---|
| ALCOJET CAT#1404 | ALCOJET CAT#1404 is a low-foaming powdered detergent. It is a blend of sodium silicate, a mixture of complex phosphate, concentrated organic chlorine, sodium carbonate, and an alkylalkoxylate. ALCOJET is biodegradable and water soluble. The phosphate content is 8.7% expressed as phosphorus. ALCOJET is nonionic. Group: Specialty chemicals, electronic & specialties. CAS No. 6834-92-0, 7722-88-5, 7758-29-4, 1344-09-8. Composition: Disodium Metasilicate, Tetrasodium Pyrophosphate, Sodium tripolyphosphate, Silicic acid, sodium salt. Application: Electronic Chemicals. Function: Cleaner - Detergent. Physical Form: Micronized Powder. Product Code: PIM000007802. |  Australia |
| CITRANOX CAT#1801 | CITRANOX CAT#1801 is a low-foaming liquid acid cleaner. It is a blend of organic acids, anionic and non-ionic surfactants and alkanolamines. CITRANOX CAT#1801 is phosphate-free product. Group: Specialty chemicals, electronic & specialties. CAS No. 77-92-9, 79-14-1. Composition: Citric acid, Glycolic acid. Application: Electronic Chemicals. Function: Cleaner - Detergent. Physical Form: Liquid. Recommended Dosage: Make a fresh1-2% solution (3-5 tbsp per gal, 1 1/4- 2 1/2 oz per gal, or 10-20 ml per L). Product Code: PIM000007800. | Australia |
| COOL PLUS CONCENTRATE | This is can be purchased as a concentrated or ready to use organic acid, water-based treatment for automotive cooling systems. It is a phosphate and silicate-free formulation containing a pH-buffered blend of additives known to reduce the corrosion of steel, cast iron, aluminium alloy, brass, copper and solder. It will not reverse pre-existing corrosion problems. It is not an anti-freeze/anti-boil type coolant and should not be used in conflict with engine manufacturers' recommendations. Cool Plus exceed the performance requirements of the following standards: ASTM D1384 "Corrosion Test for Engine Coolants in Glassware" using 20 ml per litre hard water. ASTM D4340 "Corrosion of Cast Aluminium Alloys in Engine Coolants under Heat Rejecting Conditions" using 20ml per litre hard water. Australian/New Zealand Standard 2108.1:1997 "Engine Coolants Type A and Type B for Engine Cooling Systems" using 20-30 ml per litre hard water. Uses: Cooling Systems. Product ID: 233. Categories: Cooling Systems. |  Western Australia |
| COOL PLUS RTU | This is a ready to use organic acid, water-based treatment for automotive cooling systems. It is a phosphate and silicate-free formulation containing a pH-buffered blend of additives known to reduce the corrosion of steel, cast iron, aluminium alloy, brass, copper and solder. It will not reverse pre-existing corrosion problems. It is not an anti-freeze/anti-boil type coolant and should not be used in conflict with engine manufacturers' recommendations. Cool Plus RTU exceeds the performance requirements of the following standards: See Cool Plus. Uses: Cooling Systems. Product ID: 235. Categories: Cooling Systems. | Western Australia |
| INHIBITED PROPYLENE GLYCOL (IPG) | IPG is a hybrid organic acid / propylene glycol - based antifreeze concentrate for use in those cooling systems where the use of ethylene glycol is not desirable (eg food processing, etc.). IPG is an amine, nitrite, phosphate and silicate - free formulation which contains inhibitors to reduce the corrosion of steel, cast iron, aluminium alloy, brass, copper and solder. IPG should be blended with clean good quality water to suit the cooling system requirements, as outlined in the table below: IPG is not classified as hazardous and is biodegradable. IPG should be blended with clean good quality water to suit the cooling system requirements, as outlined in the table below: IPG concentration in the system may be monitored by measuring the refractive index of the coolant, and topped up as required. Suitable biocides may be added to preserve the coolant if needed. To avoid possible incompatibility problems, do not mix with other coolant formulations. Uses: Cooling Systems. Product ID: 192. Categories: Cooling Systems. | Western Australia |
Our database is helping our users find suppliers everyday.
