Acid Wash Suppliers Australia
Find where to buy products from Australian suppliers, including: distributors, industrial manufacturers, bulk supplies and wholesalers of raw ingredients & finished goods.
Search for products or services, then visit the suppliers website for prices, SDS or more information. You can also view suppliers in NZ, UK or the USA.
Product | Description | |
---|---|---|
AC1000 Quick enquiry Where to buy Suppliers range | AC1000. Multipurpose Acid Wash. DESCRIPTION. Heavy duty concentrated acid based formulation designed to remove calcium, rust, lime and scale from most surfaces. Simply spray on neat, leave for 5-10 minutes and high pressure wash off. Completely biodegradable and non-caustic. USE: Can be diluted up to 100 times with water depending on the application. For use on boat hulls, decks, trailers, vehicles and many other applications. Always apply to a test area first and wash with potable water after use. SAFETY: Irritating to eyes and skin. Keep out of reach of children. Avoid contact with skin and eyes. Read Material Safety Data Sheet before use. WARNING: Contains 300g/l of Phosphoric Acid. Corrosive Class 8 UN-1805 PGIII. Uses: Cleaning & Maintenance, Vehicle Detailing. Product ID: 903. Categories: Cleaning & Maintenance, Vehicle Detailing. | Western Australia |
Acid Clean - AC506 Quick enquiry Where to buy Suppliers range | ACID CLEAN AC506 is a detergent blend of acids formulated for cleaning and brightening of aluminium and stainless steel. This product is the HF free version of our Acid Detergent AC580. Use neat, or diluted with up to 10 parts of potable water. Typical dilution rate is 1 part of ACID CLEAN to 5 parts of water; this solution can be diluted further or strengthened according to the extent of the contamination. For best results wash the surface to be cleaned with appropriate cleaner (i.e. truck wash or water based degreaser) to remove any dirt, debris, oil or road film. Once the surface is clean of dirt and damp, simply swab surface, working from the bottom upwards with the solution of ACID CLEAN. Pack Sizes: 5 Litre, 20 Litres, 205 Litre Drums. Product ID: AC506. Chemicals By Industry, Automotive, Chemicals By Industry, Mining. | Australia Wide |
AMILITE GCK-12H Quick enquiry Where to buy Suppliers range | Acts as a surfactant and foaming agent. It is 30% aqueous solution derived from glycine (an amino acid) rich in human collagen and coconut fatty acids. It is mild and produces creamy and resilient foam under neutral to alkaline conditions. Leaves a fresh feel on the skin without taut. It contains no waste water and is salt- and solvent-free. Improves foam volume, foam quality, rinsability and imparts nice silky feel to skin. Cold-crystallization process is possible. It is used in body washes and facial wash products. Uses: Skin care (Facial care, Facial cleansing, Body care, Baby care) Toiletries (Shower, Bath, Oral care) Hair care (Shampoos, Conditioners, Styling). Group: Raw Materials; Surfactants. Alternative Name: Potassium Cocoyl Glycinate, Potassium Cocoate, Water. Grade: Cosmetic Ingredients. CAS Number: 301341-58-2, 61789-30-8, 7732-18-5. Pack Sizes: 5 kgs, 10kg, 20kg. | Australia & Worldwide |
Apollo Acid Cleaner Quick enquiry Where to buy Suppliers range | Apollo is an acidic cleaner designed to clean and brighten aluminium and stainless steel. Uses: Acid Wash. Group: Workshop Supplies, Car & Truck Detailing, Mining and Industrial. Alternative Names: Acid Wash, Hydrochloric Acid. CAS No. 7647-01-0. Pack Sizes: 1000L, 200L, 25L, 5L, 1L. | |
BOAT WASH Quick enquiry Where to buy Suppliers range | Environmentally Friendly Boat wash. This non-caustic, solvent less degreasing detergent is biodegradable and contains powerful high-foam surface-active agents and emulsifiers for the rapid removal of all types of dirt and grime from all types of surfaces. It is a highly efficient streak-free degreasing cleaner for the hand or machine washing of boats, trailers and other vehicles. It has numerous applications in marine and industrial areas. Boat Wash is water-based and contains no ammonia, caustic or acid ingredients, petroleum hydrocarbons or chlorinated solvents. USE. First hose all loose dirt and mud from surface to be cleaned. For general cleaning use 5-10 mls Boat Wash per litre of water. Clean boats manually or by foam guns. For other hard surfaces, steam cleaners, automatic scrubbers or pressure washers may also be used For severe soil buildup, greater concentrations (up to 50%) may be used, followed by immediate rinsing. Hose off residues thoroughly. To avoid hard water spotting, dry surfaces with soft towel or chamois. May not be suitable for boats with badly weathered, flaking or rusted paintwork. SAFETY. Boat Wash is not classified as hazardous. Read Material Safety Data Sheet before use. Wear protective gloves if skin is sensitive to detergents. Spillages may be slippery. Uses: Marine Products. Product ID: 557. Categories: Marine Products. | Western Australia |
CARBOPOL ULTREZ 21 POLYMER (ACRYLATES/C10-30 ALKYL ACRYLATE CROSSPOLYMER) Quick enquiry Where to buy Suppliers range | Act as a thickener, rheology modifier and suspending agent. It is a white powder, cross-linked copolymer of polyacrylic acid that is polymerized in a toxicologically preferred co-solvent system. It offers self-wetting, short flow and non-drip properties. It shows moderate creamy skin feel and improved swelling time. It provides high viscosity and forms sparkling clear gels or hydro-alcoholic gels and creams. It can be used in after-shave, antiperspirant/deodorant, body lotions/creams/gels, hand soaps, intimate cleansers, anti-aging preparations, wipes, hand sanitizers, styling formulas and sun-, hand-, foot, face- and eye care products. Uses: Hair care (Shampoos, Conditioners, Styling, Hair Foams, Hair Sprays); Skin care (Facial care, Facial cleansing, Body care, Baby care); Creams, Lotions, Gels; Sun care (Sun protection, After-sun & Self-tanning); Toiletries (Shower & Bath, Oral care) Antiperspirants, Foot care, Hand wash, Shave lotions and cream, Personal hyginene proudcts, Toilet soaps. Group: Raw Materials; Thickeners; Stabilizers. Alternative Name: Acrylates/C10-30 Alkyl Acrylate Crosspolymer. Grade: Cosmetics. Pack Sizes: 100g, 250g, 500 grams, 1kg, 5 kgs, 10kg, 20kg. Similar to: Carbopol Ultrez 21 Polymer (Lubrizol Advanced Materials, Inc.);, Pemulen EZ-4U Polymeric Emulsifier (Lubrizol Advanced Materials, Inc.);, Acritamer 501ED (Rita Corporation);, Tego Carbomer 341 ER (Evonik Nutrition & Care GmbH). | Australia & Worldwide |
Citric Acid Where to buy Suppliers range | Strength: 50% Liquid Solution. Uses: Citric Acid is a great bacterial killer for mold and fungus making it great for general disinfecting and cleaning. It's also effective at removing soap scum, hard water stains, calcium deposits, lime, rust and is a great preservative in many cleaning solutions. When pools become stained Citric Acid is used in pool acid washes to remove these stains as it is safe and effective on all pool surfaces. Citric Acid 50% liquid solution is used as a cleaning solution for membrane filters in wastewater and water treatment. It is also an excellent chelating agent and is used to remove lime scale from boilers and evaporators. Group: Type: Non-DG / Liquid Solution & Powder Form. Pack Sizes: Pack Sizes: 2, 25 kgs & 15, 200, 1000 litres. Category: Water treatment and Swimming Pool chemicals. | Balcatta WA |
Citric Acid Powder - Food Grade Quick enquiry Where to buy Suppliers range | CITRIC ACID POWDER is a food grade weak organic tribasic acid that resembles coarse white sugar in appearance. Commonly used as a processing aid in the Food Industry or to lower pH industry or as a descaler for heat exchangers and industrial lines. CITRIC ACID POWDER has numerous domestic and janitorial uses which include: Removing stains from stainless steel when used at 1 part to 9 parts water. Descale and disinfects inside of washing machine. In an empty washing machine simply add three tablespoons of citric acid, use hot water, and run on the longest cycle. Descale taps and shower doors, make a solution of one-liter warm water and three tablespoons citric acid. Make sure the acid is dissolved. Spray on let sit for five minutes and wipe clean. Get a sparkling clean toilet, simply take ¾ cup of citric acid and sprinkle into toilet. Leave in overnight. Do not flush. The next morning brush and flush. Get rid of wine stains, with one part citric acid and 2 parts baking soda. Sprinkle over the stain; mist with water, until it fizzes, let sit for five minutes, and then scrub away. Refer Label, TDS or SD. Pack Sizes: 5KG, 15KG, 25KG BAG. Product ID: AC294. Chemicals By Industry, Brewing\, Distillery & Winery, Chemicals By Industry, Food & Beverage Processing. | Australia Wide |
Eucalyptus Peppermint Aromatique Hand Wash Quick enquiry Where to buy Suppliers range | Experience true nature in your bathroom, kitchen or laundry with the relaxing scents of this Eucalyptus and Peppermint liquid hand soap. Pure & gentle and suitable for sensitive skin types, leaving your hands feeling moisturised. This liquid soap is PALM FREE. Contains No surfactants or additives. Free of: Parabens, Sulfates, Mineral Oil, Phthalates, Formaldehyde, PEGs and also Gluten Free, Non-GMO, Cruelty Free ~ NOT TESTED ON ANIMALS & Suitable for Vegans. Ingredients: Purified water (Aqua), 100%, Pure Wattle Grove Eucalyptus Oil, Certified Organic Peppermint Oil, Potassium Oleate (soap from Sunflower Oil), Potassium Cocoate (soap from coconut), Glycerine (from Coconut), Potassium Citrate, and Citric Acid. 500ml lotion pump with twist lock PET plastic amber bottle. Group: Liquids. Product ID: WGEPHW500AMB. Eucalyptus Peppermint Aromatique Hand Wash, Hand Wash, Hand Soap. Wattle Grove Eucalyptus Oil. Wattle Grove Eucalyptus Oil. | South Australia |
GLYCOLIC ACID 70% Quick enquiry Where to buy Suppliers range | Used in various creams, serums, lotions, moisturizers, cleansers and toners designed to reduce the signs of aging, in hair care including shampoos, moisturizing shampoos, conditioners, leave-in conditioners and all-in-one body/hair washes for men and in nail polishes, nail conditioners and cuticle conditioners. Possesses smoothing and softening properties. Offers benefits such as healthy look, shine, silky feel and less flaking. Provides advantages such as biodegradability, compatibility with other compounds and ingredients and less chance of trace impurities. Uses: Decorative cosmetics/Make-up; Skin care (Facial care, Facial cleansing, Body care, Baby care); Hair care (Shampoos, Conditioners, Styling). Group: Raw Materials; Hydroxy Acids. Alternative Name: Glycolic acid. Grade: Cosmetic Ingredients. CAS Number: 79-14-1. Pack Sizes: 50g, 100g, 250g, 500 grams, 1kg, 5 kgs, 10kg. Similar to: Glypure 70. | Australia & Worldwide |
Hydrochloric Acid 32% - AC591 Quick enquiry Where to buy Suppliers range | HYDROCHLORIC ACID 32% (HCL) is an industrial strength acid commonly used for the removal of scale, lime, calcium, oxides, efflorescence, bore stains, concrete dust and hard water deposits. NOTE: this is a higher grade hydrochloric acid than the "spent / recovered" type normally found at your local pool shop or hardware store. This product is generally used at concentration from 1:5 to 1:10 parts water depending on application. The product can be used via immersion, swab or recirculation techniques. The time taken to descale most items is approximately 5 to 10 minutes. Such a wide time span is given because results vary depending primarily on scale type and build up, dilution ratio and temperature. Once a surface has been cleaned always flush with copious amounts of water to removal all acid residues. TIPS: Before using the product ensure the surface has been pre-cleaned with appropriate cleaner to remove unwanted oil, grease and film. If the surface is porous (ie bore stain on brick wall) then the surface should be well wetted to avoid acid being wicked into the surface and creating a white haze in the days following, as minerals are leached to the surface. Once a surface has been cleaned the acid should be washed off as soon as possible with copious amounts of water. Repeated acid washing may damage some surfaces. This product may etch, lighten or alter the color of tile, grout, stone and metal surfaces. Allow all new grout, concrete, cement or masonry to cure per manufacturers specification before using. Pack Sizes: 5 Litre, 20 Litres, 200 Litre, 1000 Litres. Product ID: AC591. Chemicals By Industry, Brick & Concrete Cleaning, Chemicals By Industry, Building & Construction, Chemicals By Industry, Marine, Chemicals By Industry, Pools & Recreation. | Australia Wide |
Inhibited HCL Descaler - Industrial Acid Cleaner Quick enquiry Where to buy Suppliers range | strong>INHIBITED HCL DESCALER is a industrial acid cleaner that consists of penetrants, metal protectors and corrosion inhibitors along with ~32% Hydrochloric Acid. This product is used industrially to remove scale, lime, calcium, oxides, efflorescence, uric acid, bore stains, concrete dust and hard water deposits from a variety of surfaces. It is also Ideal for cleaning heat exchangers, removing rust and concrete from ship holds, descaling boilers and lines, bore stain removal, concrete clean-up, and as a heavy duty machinery cleaner for concrete trucks and alike. This product is generally used at concentration from 1:5 to 1:20 parts water depending on application and it is highly recommended that the user application trial/s in an inconspicuous area prior to tacking the larger job at hand. The product can be used via immersion, swab or re circulation techniques. The time taken to descale most items is approximately 10-60 minutes. Such a wide time span is given because results vary depending primarily on scale type and build up, dilution ratio and temperature. Once a surface has been cleaned always flush with copious amounts of water to removal all acid residues. TIPS: Before using the product ensure the surface has been pre cleaned with appropriate cleaner to remove unwanted oil, grease and film as. If the surface is porous (i.e. bore stain on brick wall) then the surface should be well wetted to avoid acid being wicked into the surface and creating a white haze in the days to following as minerals are leached to the surface. Repeated acid washing may damage some surfaces. This product may etch, lighten or alter the color of tile, grout, stone and metal surfaces. Allow all new grout, concrete, cement or masonry to cure per manufacturers specification before using. GUIDELINE DILUTIONS. Coloured Bricks: 1 part HCL Descaler to 20 parts water i.e dark bricks. Non Coloured Bricks: 1 part HCL Descaler to 10 parts water (lightly coloured bricks). Heat Exchangers & Boilers: As required. Ship Hold: 1 part HCL Descaler to 30 parts water. Pack Sizes: 5 Litre, 20 Litres, 200 Litre, 1000 Litres. Product ID: AC5915. Chemicals By Industry, Brick & Concrete Cleaning, Chemicals By Industry, Building & Construction, Chemicals By Industry, Marine, Chemicals By Industry, Mining. | Australia Wide |
MANDELIC ACID Quick enquiry Where to buy Suppliers range | It purifies skin, regulates skin tone, fine lines and wrinkles. Used for hyperpigmentation and blemishes. Suitable for breaking intercellular cement, stimulate collagen synthesis and activating cellular regeneration. Used in cleansers, face washes, moisturizers, eye-lift creams and more. Uses: Skin care (Facial care, Facial cleansing, Body care, Baby care). Group: Raw Materials; Anti-wrinkle Agents; Purifying Agents; Regenerating; Revitalizing Agents; Toning; Invigorating Agents. Alternative Name: Mandelic Acid. Grade: Cosmetics. CAS Number: 90-64-2. Pack Sizes: 50g, 100g, 250g, 500 grams, 1kg. | Australia & Worldwide |
Marazyme Descaler Quick enquiry Where to buy Suppliers range | MARAZYME-DESCALER is an organic acidic based powder formulated with enzymes and bacterial strains which effectively dissolve organic materials, hard water precipitates, rust and uric acid scales. For regular scale control in high scale environments such as ships and mine sites add 50 grams (one scoop supplied with 5KG bucket) to the toilet bowl at least once a fortnight depending on water quality. Allow product to dissolve and stand for a minute or two, scrub/brush the bowl and then flush with water. Repeat this action if required. URINALS: Sprinkle product around the grate and effected areas, allow dissolving then scrubbing/brushing and flushing with water. DRAINS, PIPE WORK & GREASE TRAPS: If scale formation in these locations occur you may find run off/discharge from toilets, sinks and showers become very slow. Add 100-150grams of product to the effected locations and allow dissolving. Contact time is important so leave stand for a minute or two before scrubbing/brushing and then flushing with water. WASHROOMS AND SHOWERS: Add 50-100grams of product to a 10 litre container of hot water. Allow to dissolve and use the solution to scrub the effected surface areas then rinse with water. STAINLESS STEEL: Add 150-300 grams of product 10 litre container of hot water into a container or auto parts washer. Immerse item in the solution and allow time to work (15 minutes) before flushing clean with water. Pack Sizes: 5KG, 20Kg. Product ID: WC1011. Chemicals By Industry, Janitorial & Maintenance, Chemicals By Industry, Marine, Chemicals By Industry, Mining. | Australia Wide |
Max Plus Quick enquiry Where to buy Suppliers range | Max Plus is an acidic cleaner designed for red dirt removal and cleaning and brightening aluminium and stainless steel. Uses: Red Dirt Remover, Aluminium Brightener. Group: Workshop Supplies, Car & Truck Detailing, Mining & Industrial. Alternative Names: Acid Wash, Hydrofluoric Acid, Sulphuric Acid, Phosphoric Acid. CAS No. 7664-39-3 7664-93-9 7664-38-2. Pack Sizes: 1000L, 200L, 25L, 5L, 1L. | |
MIRACLE LUBE Quick enquiry Where to buy Suppliers range | ANTI-CORROSION LUBRICANT: Available in liquid or aerosol form. DESCRIPTION. This unique multipurpose product is designed to displace moisture, penetrate rusted parts, lubricate, stop squeaks, clean surfaces, and protect them from corrosion. It has numerous uses in automotive and marine maintenance, transport, engineering, industrial and commercial equipment. Miracle Lube is pH neutral, electrically non-conductive, non-corrosive, non-toxic, non-staining and non-flammable. It does not dry out, become sticky, or wash off with water, and contains no silicones, kerosene or acid forming ingredients. USE. Miracle Lube will not harm metals (including stainless steel, aluminium, copper, brass and ferrous alloys), plastic, enamel, laminex, fibreglass, painted surfaces, neoprene seals, electrical insulators, vinyl, etc. For normal use, just spray or brush Miracle Lube onto area to be treated. Items such as rusted nuts and bolts may be soaked for as long as is required. Miracle Lube also works effectively as a chain lubricant and a cutting oil for lathe work, milling, grinding, or honing of all metals. It maintains machine-finished surfaces moisture and corrosion free for long periods. SAFETY. Miracle Lube is not classified as hazardous. Read Material Safety Data Sheet before use. Avoid inhalation of spray mist during use. Pack Sizes: 1 litre and 5 litres. Product ID: 847. | Western Australia |
Neutra Brick Quick enquiry Where to buy Suppliers range | NEUTRA BRICK - ACID NEUTRALISER is a concentrated and economical solution that is used to neutralize mineral or organic acid residues after acid washing bricks, mortar, paving or stone to help prevent the common problem of white acid staining leaching to surface of brickwork and the like. This product also helps to prevent effervescence, internal rebar rusting and various other powdery layer crystal growth on brickwork. NEUTRA BRICK is a concentrate. Use 1 Litre of NEUTRA BRICK to 9 Liters of water to make Ready-to-Use Solution. Once diluted use a garden sprayer or broom to evenly and generously apply solution over the brick wall so it is well wetted and soaks into wall but running down the wall. Coverage rate is approximately 1L per m2 per coat. This coverage depends on the porosity of the bricks and mortar in the wall. With the coats of applied NEUTRA BRICK solution allow these to work for 5 minutes each before finally washing down with low pressure water. The treated wall, when dry should then be tested with litmus paper to determine its finally pH which should be in the region of 7.0 -9.5. Pack Sizes: 5 Litre, 20 Litres. Product ID: AC520. Chemicals By Industry, Brick & Concrete Cleaning. | Australia Wide |
Organic Potassium Bicarbonate Powder - Food Grade FCC for Brewing Baking Bulk Quick enquiry Where to buy Suppliers range | Potassium Bicarbonate has been used over the centuries for numerous household and health reasons. Some common uses include leavening in baking, for winemaking, in soda water, and as an effective fire retardant as well. Some have used Potassium Bicarbonate as a fungicide, vegetable wash, and is accepted for safe use in Organic Farming. This ingredient may be added to foods and beverages or smoothies and green drinks. It is a pure white granular powder and has no fillers or binders, additives or preservatives. This product is FCC grade as it meets the requirements of the Food Chemical Codex indicates and is suitable for all food, beverage and nutritional supplement applications. Suggested Uses of Potassium Bicarbonate. Organic Fungicide. Potassium Bicarbonate is used as an organic fungicide. It works as a contact fungicide inhibiting the fungus mycelium development and increasing the pH to control fungus in crops. It considered a safe and non toxic fungicide for use in organic crop production. Fire Extinguisher. Potassium Bicarbonate performs well as a fire extinguisher and is a common ingredient in powdered fire extinguishers. The slightly basic nature of potassium bicarbonate helps neutralise chemical fires and smothers the combusting material to put out the flames. Neutralise Acidic Soil. Potassium Bicarbonate is used widely in agriculture as a soil neutraliser due to its basic nature and low toxicity. The powder is dissolved in water and the solution is then applied to the soil to increase the pH level. Baking and Wine making. Potassium Bicarbonate is used in food production, wine making and drinks making to either add CO2 (rising agent) or control the release of CO2. Note: Please use as directed for any specific applications. Pack Sizes: , 400g , 1Kg , 2Kg , 5Kg , 10Kg, 20Kg. Product ID: 1G_POBICARB_FCC. | |
Oxalic Acid Powder Quick enquiry Where to buy Suppliers range | OXALIC ACID POWDER is a colourless crystalline solid that forms a colourless solution in water and is used for a variety of cleaning applications. OXALIC ACID POWDER Cleans new and old timber prior to oiling, staining and painting, when a solution of 1 part Oxalic is added to 10 parts water and applied for 20 minutes then washed of with water. OXALIC ACID POWDER has some success at removing both bore stains and rust however a purpose made product is nearly always better. To remove bore stains & rust make a solution of 1 part Oxalic to 10 with water and apply. Keep wet for 10 -20 minutes with solution and then wash clean with copious amount of water. Pack Sizes: 1KG, 5KG, 10KG, 25KG BAG. Product ID: RM050. Chemicals By Industry, Brick & Concrete Cleaning. | Australia Wide |
Phosclean Descaler Quick enquiry Where to buy Suppliers range | PHOSCLEAN is an AQIS compliant CIP acid cleaner specifically designed for the removal of scale, rust & precipitates from lines and equipment & tanks in food, beverage & dairy industries. RUST CONVERSION (Metal Priming & Preparation). Remove oil, grease & loose scale with a free rinsing water based alkaline degreaser such as PREDATOR, TRIPLE 2 or MULTISAFE. If necessary strip paint with paint stripper. Once surface is paint & free of loose scale dilute PHOSCLEAN 1:3 with potable water to make standard solution (330mls per Litre). Apply diluted product to surface & allow to dry in order to penetrate deep rust & to leave surface in a suitable condition for painting with an oil based primer. Drying times are variable & are primarily dependent on temperature. Note: PHOSCLEAN requires time to chemically destroy rust & it is not necessary to use expensive rust inhibiting paints. Zinc rich paints are not recommended. PHOSCLEAN like all preventative measures will slow but not stop rust from re-occurring. Treated surfaces left uncoated may experience further rusting or flashing so it is important to paint surfaces soon after surface is ready for painting. SURFACE RUST, BORE STAIN & TARNISHING. Dilute PHOSCLEAN 1:4 with warn potable water to make standard solution (250mls per Litre). Simply submerge the rusty parts, leave for a few minutes & then check until satisfactory. Wipe or wash off on completion. As it is not always possible to soak surfaces in a bath apply diluted PHOSCLEAN to surface with a damp cloth, sponge or fine steel wool & keep wet. Once applied allow time to penetrate & work on surface. If surface is porous, prone to runoff or is alkaline (concrete or limestone) a recoat will almost certainly be necessary. TIP: Remember surfaces took a long time to scale, rust or encrust & the process to remove this also takes time. STAIN REMOVING & GENERAL CLEANING. Dilute up to 1:10 with warm water, however a dilution of 1:4 is recommended for most applications. Apply diluted PHOSCLEAN & allow a few minutes to work & then wipe or hose off. Do not allow to dry. Deeply encrusted stains may need further applications & some slight agitation with a brush or light sourer to promote penetration. Remember to keep the surface wet with product & do not allow to dry as process will halt. TIP: Always pre test an inconspicuous test area before tackling your job. CIP CLEANING. Pre wash using AQIS Alkaline Detergent such as AC222 or Hercules then flush. Then use PHOSCLEAN at a dilution to suit your requiremts (from neat to 1:100). TIP: Always allow up to 5 minutes of contact time to dissolve scale & precipitates. Always rinse food contact surfaces with potable water after use. Always pH adjust waste water to pH 7 with sodium hydroxide before release/ disposal. SITUATIONS TO AVOID IN USE. Avoid contact with Sodium Hypochlorite solutions (bleach), colorbond, anti-fouling paint, marble, anodised or galvanised surfaces & aluminium. Always pre test an inconspicuous test area before tackling your job. Pack Sizes: 5 Litre, 20 Litres, 205 Litre Drums. Product ID: WC861. Chemicals By Industry, Building & Construction, Chemicals By Industry, Food & Beverage Processing, Chemicals By Industry, Hospitality, Chemicals By Industry, Janitorial & Maintenance, Chemicals By Industry, Kitchen, Chemicals By Industry, Marine, Chemicals By Industry, Mining, Chemicals By Industry, Workshop. | Australia Wide |
PROWASH Quick enquiry Where to buy Suppliers range | This non-caustic, solvent less degreasing detergent is biodegradable and contains powerful high-foam surface-active agents and emulsifiers for the rapid removal of all types of dirt and grime from all types of surface. It is a highly efficient streak-free degreasing cleaner for the hand or machine washing of cars, trucks, buses and other vehicles. It is also has numerous applications in marine and industrial areas. ProWash is water-based and contains no ammonia, caustic or acid ingredients, petroleum hydrocarbons or chlorinated solvents. Uses: Vehicle Detailing. Product ID: 205. Categories: Vehicle Detailing. | Western Australia |
Quake 160 - Produce Sanitiser Quick enquiry Where to buy Suppliers range | QUAKE 160 is peracetic acid (C2H4O3)) is a mixture of acetic acid (CH3COOH) and hydrogen peroxide (H2O2) in solution which finds widespread use and is a cost effective NO RINSE sanitising solution in breweries, dairy farms, food processing & commercial laundries. QUAKE 160 is also excellent at removing the green coloured vanadium stains from bricks and pavers when mixed with equal parts water and applied for 2-5 minutes then washed off. FRUIT & VEGATABLE WASHING. Ideal for sanitising lettuce, rocket, mushrooms, celery, pineapples, tomatoes, apples, broccoli, beans, squash, rockmellons, legumes, brussels and bok choy - achieving excellent plate counts (when Pre Dip & Final Dip each for 30 seconds @ 50ppm then spin for 30 seconds). Pre dip 30 Seconds @ concentration of 30ppm to 50ppm. Final Dip for 30 Seconds at concentration of 30 to 80ppm. CLEANING VANADIUM STAINS OFF BRICKS. Use 1 part Quake to 4 parts water. GENERAL SANITISING. Quake 160 is formulated to be used on pre-cleaned surfaces that contain no detergents or surfactants. To achieve 200 ppm (maximum allowable by AQIS) add 4ml to 1 litre of warm water. The following table summarizes the approximate ppm for a given dilution. Dilution Peracetic acid (ppm). 1:10 5,000. 1:100 500. 1:250 200. 1:375 150. 1:500 100. Pack Sizes: 5 Litre, 20 Litres. Product ID: WC78. Chemicals By Industry, Food & Beverage Processing. | Australia Wide |
QUICK CLEAN HD Quick enquiry Where to buy Suppliers range | HEAVY DUTY DEGREASER. USE: Quick Clean HD is suitable for use with all types of mechanical cleaning equipment. For cleaning manually or via pressure washers, steam cleaners, soak tank ultrasonics, or automatic scrubbers, dilute 1:10 to 1:40 in water, as required. Generally, 1 part to 20 parts water is recommended. For heavy soiling, it may be applied undiluted. If used in food processing areas, surfaces should be thoroughly rinsed with potable water. Quick Clean HD may adversely affect paint finishes. SAFETY: Quick Clean HD is strongly alkaline. Keep out of reach of children. Precautions should be taken during handling and use. The wearing of protective gloves, goggles, etc is recommended. Avoid inhalation of spray if protective masks are not worn. Read Material Safety Data Sheet before use. FIRST AID: If poisoning occurs, contact a doctor or Poisons Information Centre. If swallowed, DO NOT induce vomiting, give water or milk, then raw egg. If in eyes, hold eyes open and flood with water for at least 15 minutes and see a doctor. If on skin, remove contaminated clothing and wash off thoroughly with copious water. EMERGENCIES: Contain spillages. Dilute with copious water. May be neutralized with weak/diluted acid. UN1719 Hazchem 2r DG Class 8 Corrosive. Uses: Cleaning & Maintenance. Product ID: 546. Categories: Cleaning & Maintenance. | Western Australia |
RITAFACTANT 138AN Quick enquiry Where to buy Suppliers range | Ritafactant 138 AN is an all natural, mild surfactant blend. It can be used for amide free and sulfate free applications. All natural, non-ionic mild surfactant blend consisting of decyl glucoside and sodium lauroyl lactylate. Decyl glucoside is made from coconut and corn starch. Sodium lauroyl lactylate is the sodium salt of lactic acid and an effective emulsifier widely used in foods. The blend can be used for amide free and sulfate free shampoo, face and body wash. Clear to slightly hazy yellow to amber viscous liquid. Mild odor. pH 5-8. Water-soluble. Very mild surfactant compatible with anionic, non-ionic, and amphoteric surfactants. Not compatible with cationic surfactants. Offers great cleansing & foaming properties. Does not increase viscosity and doesn't respond to sodium chloride to increase viscosity. Uses: Skin care (Body washes, cleansing lotions, hand soaps, baby products, cream rinses); Hair care (Shampoos). Group: Raw Materials; Surfactants. Alternative Name: Decyl Glucoside, Sodium Lauroyl Lactylate. Grade: Cosmetic Ingredients. CAS Number: 58846-77-8 or 68515-73-1 or141464-42-8, 13557-75-0. Pack Sizes: 500 grams, 1kg, 5 kgs, 10kg, 20kg. | Australia & Worldwide |
RUST WASH Quick enquiry Where to buy Suppliers range | Multipurpose Acid Wash. DESCRIPTION. Heavy duty concentrated acid based formulation designed to remove calcium, rust, lime and scale from most surfaces. Simply spray on neat, leave for 5-10 minutes and high pressure wash off. Completely biodegradable and non-caustic. USE: Can be diluted up to 100 times with water depending on the application. For use on boat hulls, decks, trailers, vehicles and many other applications. Always apply to a test area first and wash with potable water after use. SAFETY: Irritating to eyes and skin. Keep out of reach of children. Avoid contact with skin and eyes. Read Material Safety Data Sheet before use. WARNING: Contains 300g/l of Phosphoric Acid. Corrosive Class 8 UN-1805 PGIII. Uses: Marine Products. Product ID: 524. Categories: Marine Products. | Western Australia |
Sanochlor Powder - Bactericide Cleaner Quick enquiry Where to buy Suppliers range | SANOCHLOR is a combined bactericide and cleaner ideal for all disinfecting, bacteria control, de-staining and deodorising operations in wineries, brewerys, homes, laundries, food preparation areas and toilets and washrooms etc. Rinse surface to be sanitised & cleaned with potable water, then dissolve SANOCHLOR in cold to warm water. Just 3 grams of SANOCHLOR per litre of water provides 100 parts per million of available chlorine. The typical dosage is 1 cup per 20 litres. This solution may be swabbed or sponged onto surfaces or used for soaking. Rinse the surface clean with water. If residue remains in lines flush with 2% citric acid solution to neutralise, then flush again with water. Your lines, equipment and surfaces are now sanitised and destained. Pack Sizes: 4KG, 10KG, 20KG. Product ID: WC1165. Chemicals By Industry, Brewing\, Distillery & Winery, Chemicals By Industry, Janitorial & Maintenance, Chemicals By Industry, Laundry & Dry Cleaning. | Australia Wide |
Sodium Bicarbonate Quick enquiry Where to buy Suppliers range | SODIUM BICARBONATE has many uses, it is used for pH adjustment, to Manufacture effervescent salts and beverages, artificial mineral water, baking powder, other sodium salts, pharmaceuticals, sponge rubber, gold and platinum plating, treating wool and silk, fire extinguishers, prevention of timber mould, cleaning preparations, lab reagent, antacid and mouthwash. Use as required. Pack Sizes: 5KG, 10KG, 25KG. Product ID: WC364. Chemicals By Industry, Food & Beverage Processing. | Australia Wide |
Sodium Citrate Powder - Trisodium Food Grade Salt Acid Preservative Bulk Quick enquiry Where to buy Suppliers range | Our Sodium Citrate is fully compliant Food Grade GMO Free Certified. Packages come in quality sealed and resealable bags. All packages are sealed under The Himalayan Salt Collective Australian Food Business License. What is Sodium Citrate?. Sodium citrate may is a sodium salt of citric acid occurring naturally in many citric fruits. It has a sour salty taste when added to foods. It is commonly used as an acidity regulator in food and drinks, as an emulsifier for oils, and as a laundry product builder. Common names: Trisodium Citrate, Trisodium salt, Dihydrate, Dehydrate. Ingredients: Sodium Citrate (E331). Suggested Uses of Sodium Citrate. pH Adjuster. Balances the alkalinity to rapidly reduce the acidity of food and liquids. Preservative & Food Additive. Food additive for flavour and to stop fruit and vegetables from browning. Laundry Products. Sodium Citrate is used as a builder in phosphate-free, heavy duty laundry products, hard surface cleaners, hand dishwashing products and automatic dishwashing products. Antioxidant in food. An antioxidant in food as well as sequestrant, improving the quality and stability of food. It dissolves easily and acts instantaneously. Emulsifying Agent. Emulsifier for oils in the cheese making process. Sodium citrate allows cheese to melt without becoming greasy. Package Includes. Sodium Citrate Powder in resealable bags. Pack Sizes: , 400g , 1Kg , 2Kg , 5Kg , 10Kg, 20Kg. Product ID: 1G_SODIUM_CITRATE. | |
Sodium Cocoyl Isethionate (Bulk) Quick enquiry Where to buy Suppliers range | Form: Powder/Flake. Sodium Cocoyl Isethionate is an anionic surfactant derived from coconut fatty acid and sustainable palm that are used in many cosmetic and personal care products. In particular, Sodium Cocoyl Isethionate is used in the preparation of skin cleansing products such as soaps and washes as well as in shampoos and other hair cleansing products. By helping water to mix with oil and dirt, this surfactant is great at rinsing dirt away from the skin and hair leaving both feeling fresh and clean. Activity Level: Minimum of 85% surfactant solids with up to 15% free fatty acids and some residual water. Material Origin: A reaction between Coconut Fatty Acid and Sodium Isethionate. Sodium Isethinonate is created via a reaction between Sodium Hydroxide (lye), Sodium Bisulfide and Ethylene Oxide.It is made from sustainable palm oil. Applications: Use in skin and hair cleansing preparations. Use Levels: Up to 53% as supplied in rinse off formulations and up to 17% in leave-on. How to use: As this is a dry surfactant it can be blended into a dry formulation such as a dry shampoo, bath bomb, powdered facial cleanser or equivalent or can be added to the water phase of a standard, water based cleansing product (shampoo, shaving product, cleanser etc). Caution: This ingredient has quite a low water solubility so it is far better placed in a creamy shampoo base rather than clear. It is also really well suited to shaving creams, creamy cleansers and other emulsified cleansing solutions. Group: Surfactants. Alternative Names: Sodium Cocoyl Isethionate, Coconut Acid,Sodium Isethionate,Aqua. EINECS: 263-052-5, 262-978-7,216-343-6,231-791-2. CAS No. 61789-32-0, 61788-47-4,1562-00-1,7732-18-5. Pack Sizes: 100G; 500G; 1KG; 5KG; 20KG and above upon request. Product ID: RMASSODICOCOISCT. | Worldwide |
Sodium Gluconate Quick enquiry Where to buy Suppliers range | Sodium Gluconate is the sodium salt of Gluconic Acid. The chemical is used in a variety of applications but is commonly used a a chelating agent. Sodium Gluconate is also a highly efficient set retarder and a good plasticiser/water reducer for concrete, mortar and gypsum. Sodium Gluconate can be used to clean metal and glass, with applications such as bottle washing, food service and utensil cleaning, food process equipment cleaning and paint removal. Grades: Technical and Food. Pack Sizes: MOQ is 1 pallet/1mt - We don't supply in a small quantities. Norkem your first link in the chemical chain. | Australia |
SODIUM LAUROYL SARCOSINATE Quick enquiry Where to buy Suppliers range | Powerful yet mild anionic surfactant produced from a natural fatty acid and the amino acid sarcosine. Uses: Hair care (all shampoo types) Skin care (Mild facial/body washes, Liquid soaps/antibacterial handwashes, Mild syndet bars/toilet soaps, Shaving products, Cleansers and Toners, Baby care); Toiletries (Oral care, wipes). Group: Personal Care; Cosmetic Raw Materials; Surfactants; Detergent; Foaming agent; Wetting agent. Alternative Name: Sodium Lauroyl Sarcosinate. Grade: Cosmetic Ingredients. CAS Number: 137-16-6. Pack Sizes: 1kg, 5 kgs, 10kg, 20kg. Similar to: Cansurf SL Sarc (Chemlines), Crodasinic LS-30 (Croda, Inc.), Crodasinic LS35 (Croda Europe, Ltd.), Crodasinic LS-95 (Croda, Inc.), Medialan LD (Clariant International Ltd,), Oramix L 30 (Seppic), OriStar SLSC (Orient Stars LLC). | Australia & Worldwide |
Urea (Bulk) Quick enquiry Where to buy Suppliers range | Urea has long been used in skincare for its unique combination of keratolytic and powerful hydrating properties. This keratolytic (exfoliating) property can be used in cosmetics to help with the rapid turnover of skin cells leading to the improvement of dry and scaly skin. Urea is also part of your skin's "Natural Moisturising Factor" (NMF). The NMF being composed of Lactic Acid and Lactate Salts (usually Sodium Lactate), Pyrrolidone Carboxylic Acid (PCA), Urea, Metal Ions, Sugars and Amino Acids. This makes urea both a humectant and moisturizer that promotes rehydration of the skin and helps to replenish natural moisture content of the skin. On top of this, it acts as an anti-inflammatory agent on skin that may have a damaged barrier function. Numerous studies have proven the benefits of this ingredient in treating dry, damaged and irritated skin. Ideal for use In: Creams and lotions for dry skin. After-sun products. Shampoos and body washes. Body scrubs. Cracked heal and elbow moisturizers. Hand and foot creams. Formulation Guidelines: Add to the water phase of formulations. Not heat sensitive. Can be disruptive to many emulsification and thickening systems. We recommend trialling use of urea in small batches to avoid wasting raw materials. Group: Active. Alternative Names: Urea. EINECS: 200-315-5. CAS No. 57-13-6. Pack Sizes: 100G; 500G; 1KG; 5KG; 20KG and above upon request. Product ID: RMAAUREA. Material Origin: Synthetic. Recommended Usage: 2 - 15%Solubility: Water soluble, also partially soluble in ethanol and glycerineFormula Tips: Urea is very salty and can substantially compromise emulsion stability if the emulsion hasn't been designed with Urea in mind. If you are considering adding this to your formula start with low levels and split your batch into two, trying the urea in one half and not in the other so you can benchmark the changes that the addition of Urea has on your formula. | Worldwide |
VEEGUM K (MAGNESIUM ALUMINIUM SILICATE) Quick enquiry Where to buy Suppliers range | It is a naturally occurring water-washed smectite clay used worldwide to stabilize emulsions and suspensions and to thicken a wide range of products. Provides good suspension at low viscosity. It has low acid demand and high acid and electrolyte compatibility. It is used in hair care formulas containing conditioning agents. Uses: Hair care (Shampoos, Conditioners, Styling). Group: Personal Care; Cosmetic Raw Materials; Thickeners. Alternative Name: Magnesium Aluminium Silicate. Grade: Cosmetic Ingredients. CAS Number: 12199-37-0. Pack Sizes: 250g, 500 grams, 1kg, 5 kgs, 10kg, 20kg. | Australia & Worldwide |
RUST WASH Quick enquiry Where to buy Suppliers range | Phosphoric Acid based cleaner, rust neutraliser and preventer. Distributors of WHOLESALE CHEMICALS & CLEANING PRODUCTS to the Far North Queensland region including the Atherton Tablelands the Cape & Thursday Island. Categories: Specialist Cleaning Products | Cairns, Queensland QLD |