Aluminium Silicate Suppliers Australia
Find where to buy products from Australian suppliers, including: distributors, industrial manufacturers, bulk supplies and wholesalers of raw ingredients & finished goods.
Search for products or services, then visit the suppliers website for prices, SDS or more information. You can also view suppliers in NZ, UK or the USA.
Product | Description | |
---|---|---|
ALUMINIUM SILICATE POWDER Quick enquiry Where to buy Suppliers range | Aluminium Silicate Powder suppliers. MINIMUM QUANTITY 25 KGS. Australian suppliers of specialist chemical products. | NSW, QLD, SA, WA, VIC, TAS |
VEEGUM K (MAGNESIUM ALUMINIUM SILICATE) Quick enquiry Where to buy Suppliers range | It is a naturally occurring water-washed smectite clay used worldwide to stabilize emulsions and suspensions and to thicken a wide range of products. Provides good suspension at low viscosity. It has low acid demand and high acid and electrolyte compatibility. It is used in hair care formulas containing conditioning agents. Uses: Hair care (Shampoos, Conditioners, Styling). Group: Personal Care; Cosmetic Raw Materials; Thickeners. Alternative Name: Magnesium Aluminium Silicate. Grade: Cosmetic Ingredients. CAS Number: 12199-37-0. Pack Sizes: 250g, 500 grams, 1kg, 5 kgs, 10kg, 20kg. | Australia & Worldwide |
AFAB 30 - Coolant Concentrate Quick enquiry Where to buy Suppliers range | AFAB 30 - COOLANT - Diesel Premix Coolant is a Green coloured ready-to-use anti-freeze anti-boil coolant that contains minimum of 30% ethylene glycol and incorporates virtually non-depleting organic acid corrosion inhibitors (organic additive technology - OAT). This product is silicate free and recommended as coolant for use in ferrous and aluminium alloy petrol powered automotive engines, heavy duty diesel and natural gas, mobile and stationary engines. AFAB 30 COOLANT is compatible with aluminium, copper and brass cooling systems. With the combination of organic carboxylate inhibitors this gives excellent protection against cast iron cylinder liner and block pitting, cavitation, corrosion or electrical erosion. AFAB 30 - COOLANT does not require a top-up charge of Supplemental Coolant Additive (SCA) when filling and is not expected until 72,000 hours of use when used as directed. For heavy duty diesel engine services AFAB 30 - COOLANT can be used, in light duty commercial vehicles for 3 years or 120,000kms, and heavy-duty engines for 600,000kms, 72000hrs or 3.5 years, whichever comes first. Pack Sizes: 20 Litres, 200 Litre, 1000 Litres. Product ID: AC397-30. Chemicals By Industry, Automotive, Chemicals By Industry, Workshop. | Australia Wide |
AFAB - Coolant Concentrate Quick enquiry Where to buy Suppliers range | AFAB COOLANT CONCENTRATE is a universal hybrid organic acid & ethylene glycol-based coolant, designed for use as an antifreeze and anti-boil coolant concentrate (contains 1045 g/litre 93% ethylene glycol) which is used in radiators. This product incorporates an advanced formula technology with virtually non-depleting organic acid technology (OAT) corrosion inhibitors. AFAB COOLANT CONCENTRATE is compatible with aluminium, copper and brass cooling systems. With the combination of organic carboxylate inhibitors gives an excellent protection against cast iron cylinder liner and block pitting and cavitation, corrosion/erosion. It is silicate free and recommended as coolant for use in ferrous and aluminium alloy petrol powered automotive engines, light and heavy-duty diesel, natural gas, mobile and stationary engines. Recommended for light duty commercial vehicles for 5 years or 200,000Kms at 33% v/v, and heavy-duty engines for 1,000,000Kms, 12000hrs or 6 years at 50% v/v, whichever comes first when good quality water is used. Pack Sizes: 5 Litre, 20 Litres, 205 Litre Drums. Product ID: AC397. Chemicals By Industry, Automotive. | Australia Wide |
AFAB - Long Life Red Coolant Quick enquiry Where to buy Suppliers range | AFAB LONG LIFE RED COOLANT CONCENTRATE is an extended life ethylene glycol based anti-freeze, anti-boil (AFAB) coolant concentrate with inorganic corrosion inhibitors (OAT). Light duty commercial vehicles for 5 Years or 200,000 at 33% v/v and heavy duty engines for 1,000,0000kms or 6 years at 50% v/v, whichever comes first. It is amine & silicate free and recommended for use in ferrous and aluminium alloy petrol, natural gas, heavy duty US, European and Japanese Diesel mobile and stationary engines. This product should be used as received but can be diluted as per technical advice only. Special additives have been included to provide protection from cylinder pitting from corrosion. Light duty commercial vehicles for 5 Years or 200,000 at 33% v/v and heavy duty engines for 1,000,0000kms or 6 years at 50% v/v, whichever comes first. Always dilute with distilled water according to engine manufacturers recommendations. OEM Service intervals should be maintained under warranty periods and topping up the cooling system should be done with AFAB LONG LIFE RED COOLANT. Meets or is suitable for the following: AS 2108.1:2004 Type A. ASTM D3306, D4656, D4985, D5345, D6210. SAE J1034. CATERPILLAR EC-1. CUMMINS 90 T8 4. DETROIT DIESEL. Ford WSS-M97B44-C. GM 1899M, 6277M. JASO M325 LLC. JIS K2234. Komatsu. Mack RVI. MAN 324. MB 325.3. Mitsubishi ES-X64216. MTU. Perkins. Renault. D & P Scania TI 02-98. Volvo Heavy Truck. Pack Sizes: 20 Litres, 205 Litre Drums, 1000 Litres. Product ID: AC394. Chemicals By Industry, Automotive, Chemicals By Industry, Marine, Chemicals By Industry, Mining, Chemicals By Industry, Workshop. | Australia Wide |
Cenospheres Quick enquiry Where to buy Suppliers range | Cenospheres are spherical expanded aluminium-silicate granules made from entirely recycled material. The spheres have high crush strength, pressure resistance, excellent thermal insulation properties, are non-toxic and non-hazardous. The particle shape allows for an easier application and provides a smoother finish. Main Uses: Cenospheres are extremely versatile for use in a wide range of applications including paint extenders, lightweight mortars, gypsum putties, insulation, self-leveling screeds and lightweight cementitious grouts. Categories: Ink, Paint, Coating, and adhesive | |
COOL PLUS CONCENTRATE Quick enquiry Where to buy Suppliers range | This is can be purchased as a concentrated or ready to use organic acid, water-based treatment for automotive cooling systems. It is a phosphate and silicate-free formulation containing a pH-buffered blend of additives known to reduce the corrosion of steel, cast iron, aluminium alloy, brass, copper and solder. It will not reverse pre-existing corrosion problems. It is not an anti-freeze/anti-boil type coolant and should not be used in conflict with engine manufacturers' recommendations. Cool Plus exceed the performance requirements of the following standards: ASTM D1384 "Corrosion Test for Engine Coolants in Glassware" using 20 ml per litre hard water. ASTM D4340 "Corrosion of Cast Aluminium Alloys in Engine Coolants under Heat Rejecting Conditions" using 20ml per litre hard water. Australian/New Zealand Standard 2108.1:1997 "Engine Coolants Type A and Type B for Engine Cooling Systems" using 20-30 ml per litre hard water. Uses: Cooling Systems. Product ID: 233. Categories: Cooling Systems. | Western Australia |
COOL PLUS MAX Quick enquiry Where to buy Suppliers range | COOL PLUS MAX DESCRIPTION. COOL PLUS MAX is a superior water based corrosion inhibitor based on Organic Additive Technology (OAT), which is a selectively balanced mixture of organic additives. OAT formulations are longer life products than those based on conventional formulations, making OATs the products of choice for general aftermarket servicing. 1:20 Mixing ratio. COOLPLUS MAX is a phosphate ,amine, nitirite and silicate-free formulation containing a pH-buffered blend of additives known to reduce the corrosion of steel, cast iron, aluminium alloy, brass, copper and solder. It will not reverse pre-existing corrosion problems. COOL PLUS MAX is not an anti-freeze/anti-boil type coolant and should not be used in conflict with engine manufacturers' recommendations. Replace at 36 months / 100,000 km intervals. To avoid possible incompatibility problems, do not mix with any other inhibitors or coolants. COOL PLUS MAX provides long life protection against scale, rust and residue build up. It allows maximum fuel economy by performing at the desired engine operation temperature. Contains 400g per litre of ethylene glycol as well as a bittering agent at 10ppm. Available in red or green. USE. Add 50ml of COOL PLUS MAX to every 1L of demineralised water or 1L of Cool Plus Max treats 20L of demineralised water. Dilute product before adding to the cooling system. To avoid possible incompatibility problems, do not mix with any other inhibitors or coolants. SAFETY. COOL PLUS MAX contains ethylene glycol and is poisonous if swallowed. Read Material Safety Data Sheet before use. Avoid contact with the skin and eyes. Keep out of reach of children. COOL PLUS MAX. Exceeds the performance requirements of the following standards. ASTM D1384 Corrosion Test for Engine Coolants in Glassware. ASTM D4340 Corrosion of Cast Aluminium Alloys in Engine Coolants under Heat Rejecting Conditions. Australian/New Zealand Standard 2108.1:2004 "Engine Coolants Type A and Type B for Engine Cooling Systems" using 40 ml per litre hard water. Heat-stressed Alloy Corrosion: ASTM D4340. Heat Transfer Corrosion Rate: 0.3 mg/cm2/week. Max allowable corrosion: 1.0 mg/cm2/week. Crevice/pitting Attack: None. Uses: Cooling Systems. Product ID: 447. Categories: Cooling Systems. | Western Australia |
COOL PLUS RTU Quick enquiry Where to buy Suppliers range | This is a ready to use organic acid, water-based treatment for automotive cooling systems. It is a phosphate and silicate-free formulation containing a pH-buffered blend of additives known to reduce the corrosion of steel, cast iron, aluminium alloy, brass, copper and solder. It will not reverse pre-existing corrosion problems. It is not an anti-freeze/anti-boil type coolant and should not be used in conflict with engine manufacturers' recommendations. Cool Plus RTU exceeds the performance requirements of the following standards: See Cool Plus. Uses: Cooling Systems. Product ID: 235. Categories: Cooling Systems. | Western Australia |
Green French Clay (Bulk) Quick enquiry Where to buy Suppliers range | A conditioning and nourishing clay for all skin types. Green French Clay is especially useful in formulas for sebum control. Great for face and body masks. Green French Clay has a mixed mineral origin: Kaolinite or kaolin clays can be coloured if the surrounding soil is rich in minerals. Some of these minerals have beneficial properties for the skin while others don't so much. All Kaolinites are reasonably good drawing agents as they pull toxins from the skin. Kaolin is often used as a base for clay masks due to it being well tolerated by most people. Illite is a mica type mineral occurring in argillaceous sediments with Illite being a general term for the clay minerals from this type of sediment. Argillaceous minerals appear silver-like due to their fine grain structure and trace metal constituent. Montmorillonite is a very soft phyllosilicate (silicate minerals making up 90% of the crust of the earth based on silicone and oxygen) that forms in microscopic crystals. The name Montmorillonite is a French name as it is named after a place where the clay was made famous. It is a smectite clay - smectite refers to the way the crystal sheets of the clay hold together. These clays are cationic and have a cationic exchange capacity due to the Magnesium and Aluminium in the structure. These clays swell in water and can be used to thicken and stabilise emulsions. This clay will swell a little in water. 100% natural mineral which is allowed to be used in COSMOS formulas. Appearance: Light green fine powder. Manufacturing Process: The clay undergoes a mechanical treatment, without any chemical process. It is crushed and dried. Formulation Tips: 5 - 40% in masks. Blends well with other clays. For best results, wet into the water phase prior to the addition of thickeners or oil phase. Can be added to a finished emulsion with good homogenisation. Homogenisation is recommended. Group: Clay. Alternative Names: Illite, Kaolin, Montmorillonite, Aqua. EINECS: 601-803-4, , 310-194-1, 215-288-5, 231-791-2. CAS No. 12173-60-3 [PCPC; CosIng], 68476-25-5 [AICIS], 1332-58-7, 1318-93-0, 7732-18-5. Pack Sizes: 100G; 500G; 1KG; 5KG; 20KG and above upon request. Product ID: CLAYFRGRN. Incompatibilities: Dissolves in highly acidic and highly alkaline solutions.Note: Green French Clay does | Worldwide |
INHIBITED PROPYLENE GLYCOL (IPG) Quick enquiry Where to buy Suppliers range | IPG is a hybrid organic acid / propylene glycol - based antifreeze concentrate for use in those cooling systems where the use of ethylene glycol is not desirable (eg food processing, etc.). IPG is an amine, nitrite, phosphate and silicate - free formulation which contains inhibitors to reduce the corrosion of steel, cast iron, aluminium alloy, brass, copper and solder. IPG should be blended with clean good quality water to suit the cooling system requirements, as outlined in the table below: IPG is not classified as hazardous and is biodegradable. IPG should be blended with clean good quality water to suit the cooling system requirements, as outlined in the table below: IPG concentration in the system may be monitored by measuring the refractive index of the coolant, and topped up as required. Suitable biocides may be added to preserve the coolant if needed. To avoid possible incompatibility problems, do not mix with other coolant formulations. Uses: Cooling Systems. Product ID: 192. Categories: Cooling Systems. | Western Australia |