Biocide Suppliers Australia
Find where to buy products from Australian suppliers, including: distributors, industrial manufacturers, bulk supplies and wholesalers of raw ingredients & finished goods.
Search for products or services, then visit the suppliers website for prices, SDS or more information. You can also view suppliers in NZ, UK or the USA.
Product | Description | |
---|---|---|
Biocide BS Quick enquiry Where to buy Suppliers range | BIOCIDE BS is a broad spectrum biocide for the chemical control of a wide variety of algae, bacteria (including Sulphate reducing bacteria) and fungi commonly found in water process systems and storage tanks and systems. BIOCIDE BS is a high performance broad spectrum isothiazoline and is very effective at very low concentrations of 12 ppm active ingredient in the control of algae, bacteria and fungi. Recommendations are based with out knowledge of individual water contaminates. SLUG DOSING RECOMMENDATIONS: When the system is noticeably fouled: 20 to 70ppm for every 4000 Litres. Repeat until microbial control. INTERMITTENT MAINTENANCE DOSING RECOMMENDATIONS: After establishing microbial control: 13.5 to 80 ppm. Dose 2 to 3 times per week based on microbial control. Sulphate Reducing Bacteria control between 45 to 85 ppm. Pack Sizes: 5 Litre, 20 Litres, 205 Litre Drums. Product ID: AC309. Chemicals By Industry, Marine, Chemicals By Industry, Mining. | Australia Wide |
Fueltreat Biocide Quick enquiry Where to buy Suppliers range | FUELTREAT BIOCIDE is a specially designed liquid biocide against micro-organisms contaminating fuel storage tanks and systems. FUELTREAT BIOCIDE is effective at low use levels, against microbial species commonly encountered in fuel systems, including bacteria, yeast, and mould. FUELTREAT BIOCIDE is designed to cause inhibition of microbial growth upon contact and quickly result in cell death. The exact time to kill all microbes in a fuel will vary but will typically be between 8 and 36 hours. FUELTREAT BIOCIDE is effective in systems containing both fuel and water. Unlike other fuel treatment biocides, the active ingredients in FUELTREAT BIOCIDE are not deactivated by water. Uses as required. Ensure correct PPE is worn. Pack Sizes: 20 Litres. Product ID: AC3091. Chemicals By Industry, Marine, Chemicals By Industry, Mining. | Australia Wide |
Fueltreat Biocide Quick enquiry Where to buy Suppliers range | Liquid biocide against micro-organisms contaminating fuel storage tanks and systems. Uses: Treatment against microbial species commonly encountered in fuel systems, including bacteria, yeast, and mould. Group: Biocide. Grades: Non DG. Pack Sizes: 20L. Product ID: AC3091. | Australia Wide |
Benzisothiazolin-3-one (BIT) Quick enquiry Where to buy Suppliers range | Benzisothiazolin-3-one (BIT). Uses: Biocide. Alternative Names: BIT, Proxel GXL. Grades: 20%w/w. CAS No. 2634-33-5. Pack Sizes: 25KG. | Melbourne |
BORIC ACID Quick enquiry Where to buy Suppliers range | It prevents or retard bacterial growth, and thus protect cosmetics and personal care products from spoilage. It is also used to control pH and to minimize the change in the pH of a solution when an acid or a base is added. Boric Acid helps to keep an emulsion from separating into its oil and liquid components andi is also used to alter the thickness of liquid cosmetics and personal care products. Uses: Used in the formulation of a wide variety of product types including creams and lotions and bath, hair and skin products. Group: Personal Care; Cosmetic Raw Materials; Buffering Agents; Cosmetic Biocides; Denaturants. Alternative Name: Boric Acid. Grade: Cosmetic Ingredients. CAS Number: 10043-35-3. Pack Sizes: 1kg, 5 kgs, 10kg, 20kg. | Australia & Worldwide |
Glutaraldehyde Quick enquiry Where to buy Suppliers range | Glute is biocide to preserve drilling muds and other oilfield fluids. Uses: Oil and Gas. Grades: 50%. CAS No. 111-30-8. Pack Sizes: 1100L IBC (Bulk). Categories: Glutardialdehyde, , Glutaric acid dialdehyde, , Glutaric aldehyde, , Glutaric dialdehyde, , 1,5-Pentanedial. | Brisbane |
INHIBITED PROPYLENE GLYCOL (IPG) Quick enquiry Where to buy Suppliers range | IPG is a hybrid organic acid / propylene glycol - based antifreeze concentrate for use in those cooling systems where the use of ethylene glycol is not desirable (eg food processing, etc.). IPG is an amine, nitrite, phosphate and silicate - free formulation which contains inhibitors to reduce the corrosion of steel, cast iron, aluminium alloy, brass, copper and solder. IPG should be blended with clean good quality water to suit the cooling system requirements, as outlined in the table below: IPG is not classified as hazardous and is biodegradable. IPG should be blended with clean good quality water to suit the cooling system requirements, as outlined in the table below: IPG concentration in the system may be monitored by measuring the refractive index of the coolant, and topped up as required. Suitable biocides may be added to preserve the coolant if needed. To avoid possible incompatibility problems, do not mix with other coolant formulations. Uses: Cooling Systems. Product ID: 192. Categories: Cooling Systems. | Western Australia |
N-(3-aminopropyl)-N-dodecylpropane-1,3-diamine Quick enquiry Where to buy Suppliers range | N-(3-aminopropyl)-N-dodecylpropane-1,3-diamine. Uses: Biocide. Alternative Names: Lonzabac 12.100, Triameen YD 12, Interbac 12.100. Grades: 100%w/w. CAS No. 2372-82-9. Pack Sizes: 800KG. | Melbourne |
PU OIL Protech Cutting Oil - SOLCUT EP Quick enquiry Where to buy Suppliers range | PROTECH SOLCUT EP. PROTECH SOLCUT EP is a general purpose chlorine free cutting fluid. It forms a stable milky emulsion of high. lubricity when diluted with water and is resistant against bacterial spoilage. PROTECH SOLCUT EP contains an. advanced Biocide designed to protect against both gram-negative and gram-positive bacteria. Features and Benefits. PROTECH SOLCUT EP is designed for machining applications such as drilling, milling, tapping and threading of. high carbon alloy and stainless steels. High emulsion stability. Excellent cooling and lubrication. Superior corrosion protection. Low foaming. Suitable for both ferrous and non-ferrous metals. Uses: Performance Oils. Product ID: 303. Categories: Performance Oils. | Western Australia |
PU OIL Syntech Cutting Oil - Syncut- Semi Synthetic Quick enquiry Where to buy Suppliers range | Syntech SYNCUT EP. SYNTECH SYNCUT EP is designed to produce a semi synthetic water extendable cutting fluid for use on. ferrous and non-ferrous metals. SYNTECH SYNCUT EP provides excellent corrosion protection and has a. superior degree of lubricity with exceptional wetting and cooling properties and forms a clear emulsion when. diluted with water. SYNTECH SYNCUT EP contains an advanced Biocide designed to protect against both. gram-negative and gram-positive bacteria. This product does not contain any chlorine, nitrites, phenols or active. sulphur. Features and Benefits. SYNTECH SYNCUT EP is designed for machining applications such as drilling, milling, tapping and threading of. high carbon alloy and stainless steels. High emulsion stability. Excellent cooling and lubrication. Premium corrosion protection and high quality output. Suitable for both ferrous and non-ferrous metals. Long life. Low foaming. Operator and environment friendly. Transparency allows close inspection of cutting operation. Application Rates. Material / Operation Mild Steel Alloy Steel Aluminium. Milling, Turning, Drilling 4% 5% 8%. Sawing 4% 4% 8%. Tapping, Threading 7% 10% 10%. Uses: Performance Oils. Product ID: 342. Categories: Performance Oils. | Western Australia |
STB70- Bromax 10.2/B23 Quick enquiry Where to buy Suppliers range | TB70-STABILIZED BROMINE 10.2/B23 is an antimicrobial solution for various industrial applications. Product contains ~23% Bromine & ~10.2% Chlorine at the time of manufacture. BENEFITS & TIPS. CONTAINS CHLORINE 10%. CONTAINS BROMINE 23%. BIOCIDE / ANTIMICROBIAL AGENT. LONG SHELF LIFE. SUITABLE FOR VARIOUS APPLICATIONS. Pack Sizes: 20 Litres. Product ID: AC107. Chemicals By Industry, Mining, Chemicals By Industry, Universal Products, Chemicals By Industry, Workshop. | Australia Wide |