Find where to buy products from Australian suppliers, including: distributors, industrial manufacturers, bulk supplies and wholesalers of raw ingredients & finished goods.
Search for products or services, then visit the suppliers website for prices, SDS or more information. You can also view suppliers in NZ, UK or the USA.
| Product | Description | |
|---|---|---|
| Antifoam | ANTIFOAM is commercial strength food grade anti foam used for preventive anti foaming and carrying out quick knockdown defoaming in water based and glycol applications. ANTIFOAM is silicone based anti foam emulsion that works extremely well in most aqueous systems. This product may be injected into circuits, added into chemical formulas, sprayed diluted or neat onto surface foam or solutions. Ideal for killing foam in car wash applications or wash bay treatment plants. Use as required and shake well before using. Very small quantities are required for controlling foam. Usages are as low as 1:1000. Tips for Formulating & Preparation of Solutions. ANTIFOAM should generally be added to the liquid mixture before the ingredients or any additional surfactant is added. Agitation is recommended to aid in dispersion of the various components. Add 50 to 100 ml of ANTIFOAM per 100 liters of liquid mixture. For vessels using recirculating equipment add 75 ml per 100 litres of spray mixture. If foam has already occurred add 50-100 ml of ANTIFOAM per 100 litres of spray mixture and apply. For carpet cleaning add non more than 1/3 cap to regular carpet cleaning machine. Pack Sizes: 5 Litre, 20 Litres, 205 Litre Drums. Product ID: AC102. Chemicals By Industry, Automotive, Chemicals By Industry, Brewing\, Distillery & Winery, Chemicals By Industry, Building & Construction, Chemicals By Industry, Food & Beverage Processing, Chemicals By Industry, Janitorial & Maintenance, Chemicals By Industry, Marine, Chemicals By Industry, Mining. |  Australia Wide |
| Bio Dine - Iodine Disinfectant | BIO DINE is an iodine based concentrate (an Iodophore) used to control a broad spectrum of bacteria, mould & fungi in intensive animal husbandry environments and brewing industry. BIO DINE is also used for foot baths in the beauty care industry. GENERAL HARD SURFACES & EQUIPMENT. (Non Porous) 3mL and (Porous) 6mL of BIO DINE per litre of water. Introduce BIO-DINE into cleaning system water using venturies, dosing pumps or by manual dosing. Spray all surfaces to ensure complete coverage. Allow two minutes contact time to work. If surface does not come into direct contact with food sources there is no need to rinse. If chemical is used on a food contact surface rinse with potable water. DOSE FOGGING. To help reduce bacterial growth and odours. 12 ml per litre of fogging water (1.25%). NOTE: - 1.25 litres of diluted BIO DINE doses 100 sqm of shedding. At prescribed rate animals can be directly misted or fogged without removing. Introduce BIO DINE into sheds using regular cooling/ fogging system or mobile purpose built mobile foggers Tip for convection poultry sheds apply at end of daily fogging to increase effectiveness. SHEDDING & FLOORS (excluding drinking & feeding equipment). Pack Sizes: 5 Litre, 20 Litres. Product ID: WC8610. Chemicals By Industry, Abattoir, Chemicals By Industry, Food & Beverage Processing. | Australia Wide |
| Caustic Soda Prill - Sodium Hydroxide 99% | CAUSTIC SODA is white hygroscopic crystalline powder and readily absorbs water from the air, so it should be stored in an airtight container. It is very soluble in water with liberation of heat. Sodium hydroxide is frequently used as a cleaning agent where it is often called "caustic". It is added to water, heated, and then used to clean the process equipment, tanks, drains, etc. It can dissolve grease, oils, fats and protein based deposits. A sodium hydroxide solution will leave a yellow stain on fabric and paper. Concentration is varied according to water conditions, temperature and type of cleaning requirement with higher concentration used for better performance and hard stains. Pack Sizes: 5KG PAI Litre, 20KG PAI Litre, 25KG BAG. Product ID: AC291. Chemicals By Industry, Food & Beverage Processing. | Australia Wide |
| CITRISAN | ORANGE OIL DEGREASER. DESCRIPTION. This unique non-caustic water and orange-oil based formulation is designed to clean, degrease and sanitise processing equipment, floors , walls and ablution areas, ship bilges and bulkheads, trucks, locos and rolling stock, engines, compressors and workshop equipment, mining machinery, etc. CitriSan contains orange oil, water conditioners, surface-active agents, emulsifiers and sanitisers. USE. For general cleaning, CitriSan may be diluted 1:20 to 1:100 in hot or cold water and used through pressure washers, steam cleaners, automatic scrubbers, or applied by mop and bucket, or as a spray and wipe. CitriSan may be used as -supplied for heavy soiling , and should be applied by brush in such instances. Allow to penetrate for 1 minute and hose off with a strong jet of water. For ships bilges, add 1-5 litres CitriSan per 25 litres bilge water, depending on condition. Leave for upto 12 hours, then flush twice. If used in food processing areas, surfaces should be thoroughly rinsed with potable water. SAFETY: Keep out of reach of children. Avoid contact with skin and eyes. Read Material Safety Data Sheet before use. Uses: Cleaning & Maintenance, Industrial Products, Vehicle Detailing. Product ID: 541. Categories: Cleaning & Maintenance, Industrial Products, Vehicle Detailing. |  Western Australia |
| CLEANER AND DEODORISER | Disinfectant and Deodorizer. This unique non-caustic water and orange-oil based formulation is designed to clean, degrease and sanitise processing equipment, floors , walls and ablution areas, ship bilges and bulkheads, trucks, locos and rolling stock, engines, compressors and workshop equipment, mining machinery, etc. This Cleaner and Deodoriser contains orange oil, water conditioners, surface-active agents, emulsifiers and sanitisers. USE. For general cleaning, may be diluted 1:20 to 1:100 in hot or cold water and used through pressure washers, steam cleaners, automatic scrubbers, or applied by mop and bucket, or as a spray and wipe. May be used as supplied for heavy soiling , and should be applied by brush in such instances. Allow to penetrate for 1 minute and hose off with a strong jet of water. For ships bilges, add 1-5 litres per 25 litres bilge water, depending on condition. Leave for up to 12 hours, then flush twice. If used in food processing areas, surfaces should be thoroughly rinsed with potable water. SAFETY. Keep out of reach of children. Avoid contact with skin and eyes. Read Material Safety Data Sheet before use. Uses: Marine Products. Product ID: 552. Categories: Marine Products. | Western Australia |
| Cratewash & HD CIP Cleaner | CRATEWASH & HD CIP Cleaner is a concentrated combined alkaline & disinfecting CIP & machine dishwashing detergent. Use for CRATE WASHING. Recommended for use via our electronic dispensing equipment which has been designed to give the correct dosage at all times to ensure the most economical and consistent results possible. The correct dilution is between 1 to 2 grams per litre of wash water depending on the following factors: Amount of soil on the dishes. Water hardness. Water pressure. Water temperature. To assist in obtaining optimum performance from the product, the following procedures are recommended. Scrape off loose debris from dishes. Correct stacking of plates and cutlery. Dishes are washed soon after use. Dry and Shine rinse aid is used to ensure quick and efficient drying of all ware. Wash water temperature maintained at 60-650c. Rinse water temperature maintained at 84 0c. EQUIPMENT. Talk to us about supply and installation of electronic feeding equipment under contract. A fully trained Technical Representative will monitor and correct, where necessary, the dosage amount to the machine. CIP CLEANING. Prepare a cleaning solution using cold or warm water. Do not use water above 60 degrees as this may release the chlorine. Usage dilutions vary according to application; as a general rule do not exceed 2.5% w/w. Pack Sizes: 5 Litre, 20 Litres, 205 Litre Drums, 1000 Litres. Product ID: SC250. Chemicals By Industry, Food & Beverage Processing. | Australia Wide |
| DECK & CABIN WASH | Multi Purpose Marine Cleaner with Disinfectant. This is a premium quality industrial grade product unequalled in cleaning and sanitising efficiency. It emulsifies grease and oils spontaneously, even in very hard water or seawater, and disinfects while it cleans - it kills germs instantly and inhibits growth of algae. Cabin Wash has been specially formulated for the rigorous cleaning and degreasing requirements of marine vessels, industrial workshops and processing areas. It is recommended for cleaning and sanitising concrete floors, carpets, food processing equipment, fishing boat decks, bilges, weathered aluminium truck bodies, engine degreasing, etc. USE. Deck & Cabin Wash is suitable for use with all types of mechanical cleaning equipment. Generally, for cleaning manually or via pressure washers, steam cleaners, soak tank ultrasonics, or automatic scrubbers, dilute 1:10 to 1:40 in water, as required. For normal cleaning, 1 part to 20 parts water is recommended. For heavy soiling areas, it may be applied undiluted. When used in food areas, rinse away all residues with potable water. Deck & Cabin Wash may adversely affect paint finishes if left on too long or applied in direct sunlight. SAFETY. This product is strongly alkaline and proper precautions should be taken with its use. The wearing of protective gloves, goggles, etc is recommended. Avoid inhalation of spray if protective masks are not worn. DG Class 8, UN 1719, PG III. . Uses: Marine Products. Product ID: 554. Categories: Marine Products. | Western Australia |
| Foamsan - Cleaner Sanitizer Food & Refrigerant | FOAMSAN is a specialized cleaner sanitizer designed for the removal of animal fats, starches, oils and grease from floors, walls, evaporators, heating coils, cooling cools, processing equipment and lines in food processing areas. FOAMSAN should be used daily to carry out thorough cleaning of all walls, benches, tables, utensils and equipment as a CIP Cleaner. Cool-rooms should receive regular cleans using FOAMSAN to ensure maximum control of bacteria and minimise risk of cross infection of stored foods. Use FOAMSAN at 0.5% to 5% ml per litre of warm to hot water. Rinse food - contact surfaces with potable water after use. FOAMSAN may be used via foam gun, pressure and steam cleaning units, or via sponge, brush mop or soak method. Pack Sizes: 5 Litre, 20 Litres, 205 Litre Drums. Product ID: WC485. Chemicals By Industry, Universal Products. | Australia Wide |
| Hercules - HD Food Area Detergent | HERCULES is an AQIS compliant, non dangerous heavy duty alkaline detergent formulated for quick and easy removal of animal fats, starches, pertinacious soils, dirt, grime, grease and oils from floors, walls and equipment in food processing areas. Apply neat or diluted via a spray bottle, foam gun, pressure cleaner, cloth, sponge, brush, mop or soak method. Dilution Recommendations with Water: Kitchen Degreasing 1:1 to 1:4 Foam Cleaning 1:20 to 1:100. Floor Cleaning 1:20 to 1:200 Spray & Wipe Cleaning 1:20 to 1:200. Pots & Pans As required Freezers 1:20 (with 10% Propylene Glycol if required). NOTE: Always rinse surfaces clean with potable water after cleaning with this product. Pack Sizes: 5 Litre, 20 Litres, 205 Litre Drums, 1000 Litres. Product ID: WC610. Chemicals By Industry, Abattoir, Chemicals By Industry, Brewing\, Distillery & Winery, Chemicals By Industry, Food & Beverage Processing, Chemicals By Industry, Hospitality, Chemicals By Industry, Kitchen. | Australia Wide |
| Mariner - Degreaser Sanitiser | MARINER is an industrial strength degreaser, cleaner and disinfectant for use in both the Maritime and Food Processing Industries. MARINER is designed for use as a hold & bilge cleaner. Also recommended for general cleaning and sanitising of rigs, ships, vessels, slipways, food processing and abattoir equipment, weathered aluminium truck bodies, engine and equipment degreasing. MARINER is suitable for use with all types of mechanical cleaning and spraying equipment. For Heavy Duty Degreasing, neat or up to 1 part to 4 parts water. For Normal Duty Disinfecting Cleaning, up to 1 part of MARINER to 50 parts water. When used in food establishments, rinse away all residues with potable water. Safe on most painted surfaces however we recommend performing a small test patch first. CAUTION: Not recommended for use on Aluminium unless diluted. Pack Sizes: 5 Litre, 20 Litres, 205 Litre Drums. Product ID: WC800. Chemicals By Industry, Marine. | Australia Wide |
| Phosclean Descaler | PHOSCLEAN is an AQIS compliant CIP acid cleaner specifically designed for the removal of scale, rust & precipitates from lines and equipment & tanks in food, beverage & dairy industries. RUST CONVERSION (Metal Priming & Preparation). Remove oil, grease & loose scale with a free rinsing water based alkaline degreaser such as PREDATOR, TRIPLE 2 or ... STAIN REMOVING & GENERAL CLEANING. Dilute up to 1:10 with warm water, however a dilution of 1:4 is recommended for most applications. Apply diluted PHOSCLEAN & allow a few minutes to work & then wipe or hose off. Do not allow to dry. Deeply encrusted stains may need further applications & some slight agitation with a brush or light sourer to promote penetration. Remember to keep the surface wet with product & do not allow to dry as process will halt. TIP: Always pre test an inconspicuous test area before tackling your job. CIP CLEANING. Pre wash using AQIS Alkaline Detergent such as AC222 or Hercules then flush. Then use PHOSCLEAN at a dilution to suit your requiremts (from neat to 1:100). TIP: Always allow up to 5 minutes of contact time to dissolve scale & precipitates. Always rinse food contact surfaces with potable water after use. Always pH adjust waste water to pH 7 with sodium hydroxide before release/ disposal. SITUATIONS TO AVOID IN USE. Avoid contact with Sodium Hypochlorite solutions (bleach), colorbond, anti-fouling paint, marble, anodised or galvanised surfaces & aluminium. Always pre test an inconspicuous test area before tackling your job. Pack Sizes: 5 Litre, 20 Litres, 205 Litre Drums. Product ID: WC861. Chemicals By Industry, Building & Construction, Chemicals By Industry, Food & Beverage Processing, Chemicals By Industry, Hospitality, Chemicals By Industry, Janitorial & Maintenance, Chemicals By Industry, Kitchen, Chemicals By Industry, Marine, Chemicals By Industry, Mining, Chemicals By Industry, Workshop. | Australia Wide |
| Phosclean Detergent | PHOSCLEAN DETERGENT is a commercial use, heavy-duty solution of phosphoric acid plus low foaming surfactants. It is commonly used to cut residue, fallout and buildup from beer-lines, tanks, vats and equipment in to solution for efficient removal. Further, it is specially designed to remove rust stains from paint, fiberglass, metal and most plastics. PHOSCLEAN DETERGENT is very versatile & can be used in spray, circulation, soak, brush or hand wipe applications to remove hard water scales like calcium & carbonates if used on a regular basis. SITUATIONS TO AVOID IN USE. Avoid contact with Sodium Hypochlorite solutions (bleach), colorbond, anti-fouling paint, marble, anodised or galvanised surfaces & aluminium. Always pre test an inconspicuous test area before tackling your job. Pack Sizes: 5 Litre, 20 Litres, 205 Litre Drums. Product ID: WC864. Chemicals By Industry, Abattoir, Chemicals By Industry, Building & Construction, Chemicals By Industry, Food & Beverage Processing, Chemicals By Industry, Janitorial & Maintenance, Chemicals By Industry, Marine, Chemicals By Industry, Mining, Chemicals By Industry, Workshop. | Australia Wide |
| Q San - Leave on Sanitiser | Q-SAN - Spray-On-Leave-On Sanitizer Concentrate is formulated for the daily use as an end-of-shift general purpose leave-on-sanitizer for use within all food service industry groups and is also suitable for commercial and domestic use. Q-SANs active ingredient is a quaternary ammonium compound which kills a broad spectrum of germs and bacteria. The product leaves behind an invisible Quat-polymer protective film that helps to keep surfaces germ free for up to 24 hours. FOOD AREA USE. Concentrations are regulated; use Q-SAN at rate of 50 ml per litre (5% v/v) of water via mister or trigger spray. After 5 minutes of contact time between Q-SAN and the surface the surface will then be considered as being sanitised and no further surface preparation is generally required. Hard, non-porous food contact surfaces, such as equipment and utensils, may be used following sanitation without a potable water rinse provided that Q-SAN is used at 5%v/v strictly according to directions, and the surfaces are drained and dry prior to any food contact. When used in FOOD AREAS it is recommended to discard diluted solutions after each day and make fresh solution daily. NON FOOD AREAS such as commercial and domestic use. For a high level of sanitation apply Q-SAN at rate 50 ml per litre (5%v/v) with potable water via trigger spray to a pre-cleaned surface. For low risk areas use as little as 1 part to 200 parts of water for a kill of 99.9% of germs and bugs within 1 minute. Allow the wetted surface to air dry or wipe dry with clean cloth. The surface will be considered sanitised after 1 minute. For domestic & commercial use there is no requirement to discard made-up solutions but we recommend unused solutions be discarded after 3 months when stored as per Section 7 of the SDS. Q-SAN is non-hazardous according to NOHSC criteria. Avoid unnecessary contact with skin and eyes. Do not drink. Pack Sizes: 5 Litre, 20 Litres. Product ID: WC9301. Chemicals By Industry, Abattoir, Chemicals By Industry, Aged Care, Chemicals By Industry, Brewing\, Distillery & Winery, Chemicals By Industry, Food & Beverage Processing, Chemicals By Industry, Hospitality, Chemicals By Industry, Kitchen. | Australia Wide |
| Quat - AQIS Sanitiser | QUAT is a highly concentrated AQIS compliant sanitiser formulated for the food processing industry. Surfaces to be sanitised should be cleaned and rinsed thoroughly before applying QUAT. QUAT should be diluted at 1 ml per litre of water. Apply via the dispensers provided to ensure all surfaces are sanitised at the completion of each day's trading. Leave overnight to dry. Hard, non-porous food contact surfaces, such as equipment and utensils, may be used following sanitation without a potable water rinse provided that QUAT is used according to directions and the surfaces are drained and dry prior to any food contact. Dilute solutions of QUAT are practically non-hazardous, however repeated or prolonged contact with skin and eyes, and inhalation of spray mists should be avoided. Pack Sizes: 5 Litre, 20 Litres, 205 Litre Drums. Product ID: WC930. Chemicals By Industry, Abattoir. | Australia Wide |
| QUICK CLEAN HD | HEAVY DUTY DEGREASER. USE: Quick Clean HD is suitable for use with all types of mechanical cleaning equipment. For cleaning manually or via pressure washers, steam cleaners, soak tank ultrasonics, or automatic scrubbers, dilute 1:10 to 1:40 in water, as required. Generally, 1 part to 20 parts water is recommended. For heavy soiling, it may be applied undiluted. If used in food processing areas, surfaces should be thoroughly rinsed with potable water. Quick Clean HD may adversely affect paint finishes. SAFETY: Quick Clean HD is strongly alkaline. Keep out of reach of children. Precautions should be taken during handling and use. The wearing of protective gloves, goggles, etc is recommended. Avoid inhalation of spray if protective masks are not worn. Read Material Safety Data Sheet before use. FIRST AID: If poisoning occurs, contact a doctor or Poisons Information Centre. If swallowed, DO NOT induce vomiting, give water or milk, then raw egg. If in eyes, hold eyes open and flood with water for at least 15 minutes and see a doctor. If on skin, remove contaminated clothing and wash off thoroughly with copious water. EMERGENCIES: Contain spillages. Dilute with copious water. May be neutralized with weak/diluted acid. UN1719 Hazchem 2r DG Class 8 Corrosive. Uses: Cleaning & Maintenance. Product ID: 546. Categories: Cleaning & Maintenance. | Western Australia |
| Result - Degreasing Powder | RESULT is a general purpose non-caustic detergent powder for heavy duty cleaning of floors, walls and equipment. RESULT is an ideal product for maintenance and heavy duty cleaning in kitchens, workshops, garages and food processing areas etc - anywhere there is heavy dirt, grease and grime to be removed. RESULT can be used with safety on virtually any hard surface. It will not harm "soft" metals such as tin and aluminum and is a brilliant cleaner for kitchen vent filters. For normal cleaning operation, scrub with a solution of 1 cup of RESULT per bucket of hot water. Rinse with clean water. On very heavily soiled floors, wet the surface and sprinkle RESULT over it. Allow to soak for several minutes, then scrub with a deck broom and hose off. For cleaning vent filters, make up a bath solution of 4 cups RESULT per sink of warm to hot water. Immerse the filters in this solution and allow too soak for at least 1 hour. Remove filters from the soak tank and rinse thoroughly with water. Pack Sizes: 5KG, 20KG. Product ID: WC960. Chemicals By Industry, Kitchen, Chemicals By Industry, Workshop. | Australia Wide |
| Sanitiser | Sanitise can be used as a non rinse multi purpose cleaner/sanitiser for food processing areas. This can also be used for sanitising cooking equipment and machinery, painted surfaces, upholstery, toilets, bathrooms and for steam cleaning. Uses: Sanitising. Group: Car & Truck Detailing, Commercial & Hospitality. Alternative Names: Food Safe Sanitiser, Potassium Hydroxide, Sodium Hypochlorite. CAS No. 1310-58-3, 7681-52-9. Pack Sizes: 25L, 5L. |  |
| Savon - Food Area Antibac Soap | SAVON is an UNSCENTED blue coloured, fragrance free, neutral based liquid hand soap that is formulated with an antibacterial agent to control bacteria and the spread of germs. Ideal for Commercial Kitchens & Food Processing Industries. SAVON is formulated specifically for trouble-free dispensing from wall-mounted soap systems. It is used for hand cleansing in catering areas, institutions, schools, industrial workshops, kitchens and toilets. Use the product as supplied, do not dilute. Use as received in stand alone 500ml pump bottles or decant into wall mounted dispensing equipment. When decanting the bulk product into dispensing equipment do not contaminate the fresh product by using contaminated transfer vessels. FREE ON LOAN 1L 940 Dispensers are also available for this product. Dispensers will be of consideration in conjunction with your representative. Pack Sizes: 5 Litre, 20 Litres, 5X1 Litre B Litreadder. Product ID: WC1000. Chemicals By Industry, Food & Beverage Processing, Chemicals By Industry, Hospitality, Chemicals By Industry, Kitchen. | Australia Wide |
| Sodium Bicarbonate | Uses: Sodium Bicarbonate is broadly used throughout a process called soda blasting that literally blast away surface materials without damage to the equipment. It can be used for cleaning timber, wood, doors, stairs & banisters, cars, boat hulls, masonry and food processing equipment. It has also been known to remove graffiti and to clean structural steel. Group: Type: Non-DG. Pack Sizes: Pack Sizes: 2-4, 10, 25, 1000kg. |  Balcatta WA |
| Westguard - Sanitising Spray & Wipe | WESTGUARD is an AQIS compliant food area cleaner sanitiser for killing 99.9% of germs and bugs. WESTGUARD contains biodegradable surfactant/s as well as a high level of active sanitation that is afforded by Alkyl dimethyl benzyl ammonium chloride. WESTGUARD is also accepted by the Australian Commonwealth Department of Primary Industry as a detergent/ sanitiser for use in meat export establishments. WESTGUARD is designed as an economical product that can be used on floors, walls, ceilings, foot dips and equipment. WESTGUARD is ideal for use in many industries that include; Marine, Dairy, Poultry, Primary Production, Cold Storage, Meat Processing, Hospitality and Food Preparation. WESTGUARD is effective in hard or soft water and works well in both cold and hot water. The use of hot water will increase the effectiveness of the surfactant/s by orders of magnitude (generally as hot as the hand can stand). Spray, mop, swab, or soak surfaces. Note: the greater the contact time with surfaces the greater the kill.. Rinsing is not normally necessary apart from when a surface is particularly greasy, is going to be polished or when used in a food processing area (i.e. product contains surfactant/s that may foam and taste bitter). Treated surfaces in food prep and processing areas should be rinsed with clean water. Heavy soiling 1:10 (100ml per Litre) with water Light to Medium Soiling 1:50 (20mls per Litre) with water. Pack Sizes: 5 Litre, 20 Litres, 205 Litre Drums. Product ID: WC1200. Chemicals By Industry, Hospitality. | Australia Wide |
Our database is helping our users find suppliers everyday.
