Find where to buy products from Australian suppliers, including: distributors, industrial manufacturers, bulk supplies and wholesalers of raw ingredients & finished goods.
Search for products or services, then visit the suppliers website for prices, SDS or more information. You can also view suppliers in NZ, UK or the USA.
| Product | Description | |
|---|---|---|
| COOLANT/ANTIFREEZE GP3 | Coolant/Antifreeze GP3 suppliers. MINIMUM QUANTITY 25 KGS. Australian suppliers of specialist chemical products. |  CCC Ingredients: NSW, QLD, SA, WA, VIC, TAS |
| AFAB 30 - Coolant Concentrate | AFAB 30 - COOLANT - Diesel Premix Coolant is a Green coloured ready-to-use anti-freeze anti-boil coolant that contains minimum of 30% ethylene glycol and incorporates virtually non-depleting organic acid corrosion inhibitors (organic additive technology - OAT). This product is silicate free and recommended as coolant for use in ferrous and aluminium alloy petrol powered automotive engines, heavy duty diesel and natural gas, mobile and stationary engines. AFAB 30 COOLANT is compatible with aluminium, copper and brass cooling systems. With the combination of organic carboxylate inhibitors this gives excellent protection against cast iron cylinder liner and block pitting, cavitation, corrosion or electrical erosion. AFAB 30 - COOLANT does not require a top-up charge of Supplemental Coolant Additive (SCA) when filling and is not expected until 72,000 hours of use when used as directed. For heavy duty diesel engine services AFAB 30 - COOLANT can be used, in light duty commercial vehicles for 3 years or 120,000kms, and heavy-duty engines for 600,000kms, 72000hrs or 3.5 years, whichever comes first. Pack Sizes: 20 Litres, 200 Litre, 1000 Litres. Product ID: AC397-30. Chemicals By Industry, Automotive, Chemicals By Industry, Workshop. |  Australia Wide |
| AFAB 50 - HD Coolant Diesel & Petrol | AFAB 50 is a green coloured, premium performance, low silicate, ethylene glycol based coolant, antifreeze and corrosion inhibitor for use in all automotive cooling systems such as those in passenger cars, trucks, busses and equipment. Use as received in clean and good condition cooling systems. Flush system as per manufactures instructions first. Pack Sizes: 5 Litre, 20 Litres. Product ID: AC398. Chemicals By Industry, Automotive, Chemicals By Industry, Marine, Chemicals By Industry, Mining, Chemicals By Industry, Workshop. | Australia Wide |
| AFAB - Coolant Concentrate | AFAB COOLANT CONCENTRATE is a universal hybrid organic acid & ethylene glycol-based coolant, designed for use as an antifreeze and anti-boil coolant concentrate (contains 1045 g/litre 93% ethylene glycol) which is used in radiators. This product incorporates an advanced formula technology with virtually non-depleting organic acid technology (OAT) corrosion inhibitors. AFAB COOLANT CONCENTRATE is compatible with aluminium, copper and brass cooling systems. With the combination of organic carboxylate inhibitors gives an excellent protection against cast iron cylinder liner and block pitting and cavitation, corrosion/erosion. It is silicate free and recommended as coolant for use in ferrous and aluminium alloy petrol powered automotive engines, light and heavy-duty diesel, natural gas, mobile and stationary engines. Recommended for light duty commercial vehicles for 5 years or 200,000Kms at 33% v/v, and heavy-duty engines for 1,000,000Kms, 12000hrs or 6 years at 50% v/v, whichever comes first when good quality water is used. Pack Sizes: 5 Litre, 20 Litres, 205 Litre Drums. Product ID: AC397. Chemicals By Industry, Automotive. | Australia Wide |
| AFAB - Long Life Red Coolant | AFAB LONG LIFE RED COOLANT CONCENTRATE is an extended life ethylene glycol based anti-freeze, anti-boil (AFAB) coolant concentrate with inorganic corrosion inhibitors (OAT). Light duty commercial vehicles for 5 Years or 200,000 at 33% v/v and heavy duty engines for 1,000,0000kms or 6 years at 50% v/v, whichever comes first. It is amine & silicate free and recommended for use in ferrous and aluminium alloy petrol, natural gas, heavy duty US, European and Japanese Diesel mobile and stationary engines. This product should be used as received but can be diluted as per technical advice only. Special additives have been included to provide protection from cylinder pitting from corrosion. Light duty commercial vehicles for 5 Years or 200,000 at 33% v/v and heavy duty engines for 1,000,0000kms or 6 years at 50% v/v, whichever comes first. Always dilute with distilled water according to engine manufacturers recommendations. OEM Service intervals should be maintained under warranty periods and topping up the cooling system should be done with AFAB LONG LIFE RED COOLANT. Meets or is suitable for the following: AS 2108.1:2004 Type A. ASTM D3306, D4656, D4985, D5345, D6210. SAE J1034. CATERPILLAR EC-1. CUMMINS 90 T8 4. DETROIT DIESEL. Ford WSS-M97B44-C. GM 1899M, 6277M. JASO M325 LLC. JIS K2234. Komatsu. Mack RVI. MAN 324. MB 325.3. Mitsubishi ES-X64216. MTU. Perkins. Renault. D & P Scania TI 02-98. Volvo Heavy Truck. Pack Sizes: 20 Litres, 205 Litre Drums, 1000 Litres. Product ID: AC394. Chemicals By Industry, Automotive, Chemicals By Industry, Marine, Chemicals By Industry, Mining, Chemicals By Industry, Workshop. | Australia Wide |
| Welding Torch Coolant | WELDING TORCH COOLANT is a non-toxic inhibited, yellow coloured coolant for regular to heavy duty cooling applications in welding devices. Suitable for use at manufacturers fill specifications in most portable welders or fixed robotic welders. Inbuilt inhibitor provides corrosion protection to both ferrous and non-ferrous metals for up to 5 years under normal use conditions. Do not dilute and use as received. Silicate free, nitrite and nitrate free, non-hazardous and not subject to any special disposal considerations. Pack Sizes: 20 Litres. Product ID: AC404. Chemicals By Industry, Workshop. | Australia Wide |
| Ablefrost | Heat transfer Fluid. Uses: Propylene glycol-based heat transfer fluid. Group: Propylene glycol. Alternative Names: Cooling fluid, coolant. Grades: Non DG. Pack Sizes: 20L, 205L, 1,000L. Product ID: AC393. | Australia Wide |
| Aqua Guard Radiator Inhibitor | AQUA GUARD RADIATOR INHIBITOR is a green coloured corrosion inhibitor concentrate designed to produce an economical corrosion inhibited coolant when added to soft or demineralised water. Use to provide adequate protection for cast iron engines whose fluids dropped and replaced annually. This product meets the requirements of AS2108.1:2004 Type B and when mixed according to directions will provide adequate protection for 12 months or 50,000 km under standard Australian road going conditions. Please note that this product should not be mixed with AS2108.1:2004 Type A coolants and this product has no effect on freezing or boiling point of a cooling system (ie not AF or AB) and for this reason this product is not recommended for freezing conditions or high performance applications. Pack Sizes: 5 Litre, 20 Litres, 1000 Litres, 1000 Litres RTU. Product ID: AC399. Chemicals By Industry, Automotive. | Australia Wide |
| Auto Cool Green Concentrate | Auto Cool is an anti-freeze, anti-boil automotive engine coolant containing ethylene glycol. Uses: Engine Coolant. Group: Workshop Supplies. Alternative Names: Coolants. Pack Sizes: 20L. |  |
| Auto Cool Green RFU | Auto Cool is an anti-freeze, anti-boil automotive engine coolant containing ethylene glycol. Uses: Engine Coolant. Group: Workshop Supplies. Alternative Names: Coolants. Pack Sizes: 200L, 20L, 5L. | |
| Auto Cool Red Concentrate | Auto Cool is an anti-freeze, anti-boil automotive engine coolant containing ethylene glycol. Uses: Engine Coolant. Group: Workshop Supplies. Alternative Names: Coolants. Pack Sizes: 20L. | |
| Auto Cool Red RFU | Auto Cool is an anti-freeze, anti-boil automotive engine coolant containing ethylene glycol. Uses: Engine Coolant. Group: Workshop Supplies. Alternative Names: Coolants. Pack Sizes: 200L, 20L, 5L. | |
| Cooling System StopLeak | Cooling System StopLeak: Provides temporary repair of radiator leaks and seepage from radiator hoses and gaskets, and reduces loss of coolant from the cooling system. Contains lubricating heat-sensitive synthetic polymers and is free from abrasive mineral fibres. Categories: Mechanical, Automotive Products, Radiator Fluids |  Western Australia |
| COOLING SYSTEM STOP LEAK | Cooling System StopLeak is a specially formulated liquid designed to provide temporary repair of radiator leaks and seepage from radiator hoses and gaskets, and to reduce the loss of coolant from the cooling system. Cooling System StopLeak contains lubricating heat-sensitive synthetic polymers and is free from abrasive mineral fibres. Uses: Cooling Systems. Product ID: 178. Categories: Cooling Systems. | Western Australia |
| COOL MAX 100 | This is a general purpose ready to use glycol based treatment for automotive cooling systems. Freezing point is -35 degrees C approx at 50% dilution and -15 degrees C at 35% dilution. Replace at 24 month / 60,000 km intervals. May be replaced more frequently depending on engine and driving conditions. Top up radiator as required to avoid rundown in concentration. This product contains a pH-buffered blend of additives known to reduce the corrosion of steel, cast iron, aluminium alloy, brass, copper and solder. This product exceeds the performance requirements of the following standards when assessed in hard water and is made to General Motors Specification HN 2043. ASTM D1384 " Corrosion Test for Engine Coolants in Glassware.". ASTM D4340 "Corrosion of Cast Aluminium Alloys in Engine Coolants Under Heat Rejecting Conditions.". ASTM D2570 "Simulated Service Corrosion Test for Engine Coolants.". ASTM D2809 "Cavitation Corrosion and Erosion Corrosion Characteristics of Aluminium Pumps With Engine Coolants.". Australian/New Zealand Standard 2108.1:1997 "Engine Coolants Type A and Type B for Engine Cooling Systems.". This product will not reverse pre-existing corrosion problems, and should not be used in conflict with engine manufacturer's recommendations. Uses: Cooling Systems. Product ID: 229. Categories: Cooling Systems. | Western Australia |
| COOL MAX 50 | COOL MAX 50 general purpose concentrated glycol based treatment for automotive cooling systems. Freezing point is -35 degrees C approx. Replace at 24 month / 60,000 km intervals. May be replaced more frequently depending on engine and driving conditions. This product contains a pH-buffered blend of additives known to reduce the corrosion of steel, cast iron, aluminium alloy, brass, copper and solder. It exceeds the performance requirements of the following standards when assessed in hard water and is made to General Motors Specification HN 2043. ASTM D1384 " Corrosion Test for Engine Coolants in Glassware.". ASTM D4340 "Corrosion of Cast Aluminium Alloys in Engine Coolants Under Heat Rejecting Conditions.". ASTM D2570 "Simulated Service Corrosion Test for Engine Coolants.". ASTM D2809 "Cavitation Corrosion and Erosion Corrosion Characteristics of Aluminium Pumps With Engine Coolants.". Australian/New Zealand Standard 2108.1:1997 "Engine Coolants Type A and Type B for Engine Cooling Systems.". This product will not reverse pre-existing corrosion problems, and should not be used in conflict with engine manufacturer's recommendations. Uses: Cooling Systems. Product ID: 221. Categories: Cooling Systems. | Western Australia |
| COOL PLUS CONCENTRATE | This is can be purchased as a concentrated or ready to use organic acid, water-based treatment for automotive cooling systems. It is a phosphate and silicate-free formulation containing a pH-buffered blend of additives known to reduce the corrosion of steel, cast iron, aluminium alloy, brass, copper and solder. It will not reverse pre-existing corrosion problems. It is not an anti-freeze/anti-boil type coolant and should not be used in conflict with engine manufacturers' recommendations. Cool Plus exceed the performance requirements of the following standards: ASTM D1384 "Corrosion Test for Engine Coolants in Glassware" using 20 ml per litre hard water. ASTM D4340 "Corrosion of Cast Aluminium Alloys in Engine Coolants under Heat Rejecting Conditions" using 20ml per litre hard water. Australian/New Zealand Standard 2108.1:1997 "Engine Coolants Type A and Type B for Engine Cooling Systems" using 20-30 ml per litre hard water. Uses: Cooling Systems. Product ID: 233. Categories: Cooling Systems. | Western Australia |
| COOL PLUS MAX | COOL PLUS MAX DESCRIPTION. COOL PLUS MAX is a superior water based corrosion inhibitor based on Organic Additive Technology (OAT), which is a selectively balanced mixture of organic additives. OAT formulations are longer life products than those based on conventional formulations, making OATs the products of choice for general aftermarket servicing. 1:20 Mixing ratio. COOLPLUS MAX is a phosphate ,amine, nitirite and silicate-free formulation containing a pH-buffered blend of additives known to reduce the corrosion of steel, cast iron, aluminium alloy, brass, copper and solder .... Contains 400g per litre of ethylene glycol as well as a bittering agent at 10ppm. Available in red or green. USE. Add 50ml of COOL PLUS MAX to every 1L of demineralised water or 1L of Cool Plus Max treats 20L of demineralised water. Dilute product before adding to the cooling system. To avoid possible incompatibility problems, do not mix with any other inhibitors or coolants. SAFETY. COOL PLUS MAX contains ethylene glycol and is poisonous if swallowed. Read Material Safety Data Sheet before use. Avoid contact with the skin and eyes. Keep out of reach of children. COOL PLUS MAX. Exceeds the performance requirements of the following standards. ASTM D1384 Corrosion Test for Engine Coolants in Glassware. ASTM D4340 Corrosion of Cast Aluminium Alloys in Engine Coolants under Heat Rejecting Conditions. Australian/New Zealand Standard 2108.1:2004 "Engine Coolants Type A and Type B for Engine Cooling Systems" using 40 ml per litre hard water. Heat-stressed Alloy Corrosion: ASTM D4340. Heat Transfer Corrosion Rate: 0.3 mg/cm2/week. Max allowable corrosion: 1.0 mg/cm2/week. Crevice/pitting Attack: None. Uses: Cooling Systems. Product ID: 447. Categories: Cooling Systems. | Western Australia |
| COOL PLUS RTU | This is a ready to use organic acid, water-based treatment for automotive cooling systems. It is a phosphate and silicate-free formulation containing a pH-buffered blend of additives known to reduce the corrosion of steel, cast iron, aluminium alloy, brass, copper and solder. It will not reverse pre-existing corrosion problems. It is not an anti-freeze/anti-boil type coolant and should not be used in conflict with engine manufacturers' recommendations. Cool Plus RTU exceeds the performance requirements of the following standards: See Cool Plus. Uses: Cooling Systems. Product ID: 235. Categories: Cooling Systems. | Western Australia |
| COOLTECH | LONG LIFE ANTIFREEZE ANTIBOIL. DESCRIPTION. COOLTECH was designed to generally exceed the broad range of national, international and OEM standards so workshops can SAVE MONEY by having one coolant to do a wide range of vehicles. (Ref Standards list) Cooltech is recommended for all general aftermarket servicing of the trucking, mining, transport and general automotive industries. Mixing ratio 2:1. COOLTECH has a maximum service life of 4 years, 1,000,000km, 12000 hours or whichever comes first in a well maintained engine cooling circuit at 50% v/v. Chemsol advises against indiscriminate mixing of different coolant formulations. Mixing different coolants may cause precipitation of inhibitor components and potentially result in overheating and reduced corrosion protection. COOLTECH provides maximum antifreeze / anitboil protection and provides peak reliability and operation life of the water pump because it is silicate free. It also provides premium cavitation and liner pitting protection maximising protection of all metals commonly found in the engine cooling system. It contains 1010g/L of Mono ethylene Glycol. COOLTECH is a superior general-purpose coolant based on Organic Additive Technology (OAT), which is a selectively balanced mixture of organic additives. ... It is a formulation based on monoethylene glycol and is free of nitrite, phosphate and amine inhibitors. COOLTECH is produced as a green liquid. Bittering agents are deliberately added, to reduce the risk of accidental poisoning by ingestion. COOLTECH provides long life protection against scale, rust and residue build up. It allows maximum fuel economy by performing at the desired engine operation temperature. USE. COOLTECH should be used in conjunction with the recommendation by the vehicle manufacturer. In the absence of such guidance, it should be diluted with good quality water to give solutions in the concentrati | Western Australia |
| Corrogard Concentrate - Corrosion Inhibitor | CORROGARD is a corrosion inhibitor concentrate. For OAT systems. Compatible with mono ethylene glycol (MEG) and mono propylene glycol (MPG). Use at 5% v/v with either mono ethylene glycol (MEG) or mono propylene glycol (MPG) to produce high performance coolants that meets ASTM D 3306 or ASTM D 4985. Pack Sizes: 5 Litre, 20 Litres. Product ID: AC396. Chemicals By Industry, Universal Products. | Australia Wide |
| CORROSOAK | Rust and Scale Remover. Description. CorroSoak is designed for the safe removal of rust, scale and tarnish from most metal objects. It has numerous applications in the automotive, marine, construction, mining, and food processing industries, as well as many areas around the home. CorroSoak is biodegradable, water-based and contains no solvents, phosphates, mineral acids or caustic ingredients. Approved by the Dept. of Primary Industry and Energy for use in export registered meat establishments. Use. CorroSoak can be used as a radiator flushing compound to remove rust and scale buildup from the cooling system. Drain old coolant from the cooling system (including heater) and refill with water. Add 500 mls CorroSoak to the radiator and run the engine for 15 to 20 minutes. Drain and thoroughly flush the system with water before filling with coolant such as Cool Max or Cool Plus coolants. To conserve product, any loose rust or scale deposits should first be removed using a wire brush. All traces of oil and grease should be cleaned off with detergent. CorroSoak is simply diluted in hot or cold water at the rate of 1 litre concentrate to 5 litres water, and the metal object immersed for between 3 - 24 hours. Hot water works much more quickly than cold water. The object is then removed, rinsed well and dried. The diluted CorroSoak may be re-used many times. Not suitable for zinc galvanized surfaces. Use with caution on magnesium alloys, or where solder is present. Safety. CorroSoak is not classified as hazardous. Read Material Safety Data Sheet before use. Avoid contact with skin and eyes and avoid breathing vapours. The wearing of rubber gloves is recommended when handling this product. Uses: Industrial Products. Product ID: 543. Categories: Industrial Products. | Western Australia |
| INHIBITED PROPYLENE GLYCOL (IPG) | IPG is a hybrid organic acid / propylene glycol - based antifreeze concentrate for use in those cooling systems where the use of ethylene glycol is not desirable (eg food processing, etc.). IPG is an amine, nitrite, phosphate and silicate - free formulation which contains inhibitors to reduce the corrosion of steel, cast iron, aluminium alloy, brass, copper and solder. IPG should be blended with clean good quality water to suit the cooling system requirements, as outlined in the table below: IPG is not classified as hazardous and is biodegradable. IPG should be blended with clean good quality water to suit the cooling system requirements, as outlined in the table below: IPG concentration in the system may be monitored by measuring the refractive index of the coolant, and topped up as required. Suitable biocides may be added to preserve the coolant if needed. To avoid possible incompatibility problems, do not mix with other coolant formulations. Uses: Cooling Systems. Product ID: 192. Categories: Cooling Systems. | Western Australia |
| ISOPROPYL ALCOHOL | ISOPROPYL ALCOHOL (IPA) is a clear, colourless liquid alcohol with a characteristic alcoholic odour. The principal end uses of IPA include printing inks, coatings, coolants, deicing, organic synthesis, industrial solvents, electronics cleaner, personal care products and pharmaceuticals. Available in technical grade and USP grade. Group: Specialty chemicals, paints & coatings. CAS No. 67-63-0. Composition: 2-Hydroxypropane, 2-Propyl alcohol. Application: Architectural and Deco., Automotive Paints, Printing Inks. Function: ADDITIVESOther. Physical Form: Liquid. Product Code: PIM000060295. |  Australia |
| MAYSOL SSD-50 | A semi-synthetic coolant concentrate that allows the formulator to blend a high quality, general-purpose product. Applications that can be performed with Maysol SSD-50 range from light duty to medium duty on both ferrous and non-ferrous operations. Such o Main Uses: Metalworking lubricant. Other Names: Semi-Synthetic coolant concentrate. Cas No. Not Registered. Product Category: Metalworking Additives. PACK SIZES AVAILABLE: 204kg Drums |  Australia Wide, offices in Sydney & Melbourne |
| MAYSYN S-122 | Synthetic fluid concentrate for grinding and medium-duty machining. Maysyn S-122 is an oil-rejecting synthetic coolant concentrate formulated for all types of metals and alloys, including cast iron, steels, stainless, and nonferrous materials. This coola Main Uses: Metalworking coolant. Other Names: Synthetic fluid concentrate. Cas No. Not Registered. Product Category: Metalworking Additives. PACK SIZES AVAILABLE: 218kg Drums | Australia Wide, offices in Sydney & Melbourne |
| Mono Ethylene Glycol | Used in Anifreeze, coolants and solvents. Uses: MONO ETHYLENE GLYCOL (MEG) is an important raw material for industrial applications. MEG is used industrially in the production of antifreezes, coolants and solvents. Commonly used as a budget heat exchange fluid. Group: Glycol. Alternative Names: MEG, ethylene glycol. Grades: Non DG. Pack Sizes: 5L, 20L, 205L, 1,000L. Product ID: AC0254. | Australia Wide |
| Mono Ethylene Glycol (MEG) | MONO ETHYLENE GLYCOL (MEG) is an important raw material for industrial applications. MEG is used industrially in the production of antifreezes, coolants and solvents. Commonly used as a budget heat exchange fluid. See as required. Ensure correct PPE is worn. Pack Sizes: 5 Litre, 20 Litres, 200 Litre, 1000 Litres. Product ID: AC0254. Chemicals By Industry, Marine, Chemicals By Industry, Mining, Chemicals By Industry, Workshop. | Australia Wide |
| Polyricinoleic Acid | Polyricinoleic Acid (PRA) is a polymer of ricinoleic acid which occurs naturally in castor oil in the triglyceride form. It is a viscous pale-yellow coloured liquid with a fatty odour. Polyricinoleic Acid can be used in metal working as lubricants and a coolant. It can be formulated with a wide range of oils, surfactants, and oil soluble materials. Cas No. 27925-02-6. Synonyms Polymerised Ricinoleic Acid (PRA), Polymerised Hydroxy Fatty Acid, Condensed Ricinoleic Acid. |  MPL Products |
| Propylene Glycol USP | PROPYLENE GLYCOL USP (CAS 57-55-6) is a non-toxic organic raw material that is used for a variety of industrial applications that involve heat transfer systems that operate at temperatures outside the normal freezing and boiling points of water. PROPYLENE GLYCOL USP is commonly used as an anti-freeze, coolant for beer and beverage cooling system (commonly called glycol systems), food manufacturing / processing systems, VAC applications, laser cutting, milk & wine production equipment. Use as required. Pack Sizes: 5 Litre, 20 Litres, 200 Litre, 1000 Litres. Product ID: AC402. Chemicals By Industry, Brewing\, Distillery & Winery, Chemicals By Industry, Food & Beverage Processing, Chemicals By Industry, Laboratory, Chemicals By Industry, Marine, Chemicals By Industry, Workshop. | Australia Wide |
| Soluble Cutting Oil | SOLUBLE CUTTING OIL is a clear semi-synthetic coolant concentrate used for machining and grinding ferrous and non-ferrous metals. This product is non-ionic and is compatible with most waste treatment systems. It is low foaming and the neutral pine additive provides excellent and safe bio-resistance for long life in both individual sumps and large central systems. When diluted with potable water this product forms a semi translucent pink micro emulsion that extends tool life whilst protecting machines and parts from corrosion without depositing tacky or overly slippery residues. Unlike most soluble oils the emulsion droplets are smaller than the wavelengths of light and as such are more stable and robust. This metalworking fluid provides an economical solution to high fluid usage and waste by eliminating frequent system recharges, high make-up rates and excessive use of costly tank side additives. General Purpose Machining: 1:20. Milling Drilling & Tapping: 1:10. Grinding: 1:25. Machining Cast Iron: 1:25. Refractometer reading 1:10 (10%) 4.8. Pack Sizes: 20 Litres, 205 Litre Drums. Product ID: WC1084. Chemicals By Industry, Workshop. | Australia Wide |
| XIAMETER Q1-6083 ANTIFREEZE Additive | XIAMETER Q1-6083 ANTIFREEZE Additive is a stabilizer for silicate corrosion inhibitors used to stabilize aqueous silicates and silica sols in engine coolants and inhibit metal corrosion in aqueous systems. XIAMETER Q1-6083 ANTIFREEZE Additive contains a range of benefits of low viscosity solution, phosphate functional siliconate, basic pH, stabilizes sodium silicates used as corrosion inhibitors in engine coolant, helps prevent precipitation and gelling of silicate, useful with a wide range of SiO2:Na2O ratio sodium silicate and an effective at very low levels. Group: Personal care ingredients, homecare & institutional cleaning. CAS No. 73750-69-3, 67-56-1. Composition: Synthetic. Application: Car Care. Physical Form: Liquid. Product Code: PIM000043133. | Australia |
Our database is helping our users find suppliers everyday.
