Find where to buy products from Australian suppliers, including: distributors, industrial manufacturers, bulk supplies and wholesalers of raw ingredients & finished goods.
Search for products or services, then visit the suppliers website for prices, SDS or more information. You can also view suppliers in NZ, UK or the USA.
| Product | Description | |
|---|---|---|
| AFAB 30 - Coolant Concentrate | AFAB 30 - COOLANT - Diesel Premix Coolant is a Green coloured ready-to-use anti-freeze anti-boil coolant that contains minimum of 30% ethylene glycol and incorporates virtually non-depleting organic acid corrosion inhibitors (organic additive technology - OAT). This product is silicate free and recommended as coolant for use in ferrous and aluminium alloy petrol powered automotive engines, heavy duty diesel and natural gas, mobile and stationary engines. AFAB 30 COOLANT is compatible with aluminium, copper and brass cooling systems. With the combination of organic carboxylate inhibitors this gives excellent protection against cast iron cylinder liner and block pitting, cavitation, corrosion or electrical erosion. AFAB 30 - COOLANT does not require a top-up charge of Supplemental Coolant Additive (SCA) when filling and is not expected until 72,000 hours of use when used as directed. For heavy duty diesel engine services AFAB 30 - COOLANT can be used, in light duty commercial vehicles for 3 years or 120,000kms, and heavy-duty engines for 600,000kms, 72000hrs or 3.5 years, whichever comes first. Pack Sizes: 20 Litres, 200 Litre, 1000 Litres. Product ID: AC397-30. Chemicals By Industry, Automotive, Chemicals By Industry, Workshop. |  Australia Wide |
| AFAB 50 - HD Coolant Diesel & Petrol | AFAB 50 is a green coloured, premium performance, low silicate, ethylene glycol based coolant, antifreeze and corrosion inhibitor for use in all automotive cooling systems such as those in passenger cars, trucks, busses and equipment. Use as received in clean and good condition cooling systems. Flush system as per manufactures instructions first. Pack Sizes: 5 Litre, 20 Litres. Product ID: AC398. Chemicals By Industry, Automotive, Chemicals By Industry, Marine, Chemicals By Industry, Mining, Chemicals By Industry, Workshop. | Australia Wide |
| AFAB - Coolant Concentrate | AFAB COOLANT CONCENTRATE is a universal hybrid organic acid & ethylene glycol-based coolant, designed for use as an antifreeze and anti-boil coolant concentrate (contains 1045 g/litre 93% ethylene glycol) which is used in radiators. This product incorporates an advanced formula technology with virtually non-depleting organic acid technology (OAT) corrosion inhibitors. AFAB COOLANT CONCENTRATE is compatible with aluminium, copper and brass cooling systems. With the combination of organic carboxylate inhibitors gives an excellent protection against cast iron cylinder liner and block pitting and cavitation, corrosion/erosion. It is silicate free and recommended as coolant for use in ferrous and aluminium alloy petrol powered automotive engines, light and heavy-duty diesel, natural gas, mobile and stationary engines. Recommended for light duty commercial vehicles for 5 years or 200,000Kms at 33% v/v, and heavy-duty engines for 1,000,000Kms, 12000hrs or 6 years at 50% v/v, whichever comes first when good quality water is used. Pack Sizes: 5 Litre, 20 Litres, 205 Litre Drums. Product ID: AC397. Chemicals By Industry, Automotive. | Australia Wide |
| COOL FLUSH | Cool Flush is a specially formulated liquid for removing sludge, grease and scale from radiators and engine water jackets. Cool Flush is non-acidic , solvent less and biodegradable and is safe to use on both cast iron and aluminium alloy. It will not adversely affect water pump seals or radiator hoses. Uses: Cooling Systems. Product ID: 79. Categories: Cooling Systems. |  Western Australia |
| Cooling System Antifreeze/ Antiboil - GMH Spec | Cooling System Antifreeze/ Antiboil - GMH Spec: Concentrated glycol based treatment for automotive cooling systems. ASTM D1384, ASTM D4340, ASTM D2570, ASTM D2809, AS 2108, GM HN2083. - Concentrate - Ready-To-Use; 50% - Ready-To-Use; 40%. Categories: Mining, Industrial, Mechanical, Agricultural | Western Australia |
| COOLING SYSTEM STOP LEAK | Cooling System StopLeak is a specially formulated liquid designed to provide temporary repair of radiator leaks and seepage from radiator hoses and gaskets, and to reduce the loss of coolant from the cooling system. Cooling System StopLeak contains lubricating heat-sensitive synthetic polymers and is free from abrasive mineral fibres. Uses: Cooling Systems. Product ID: 178. Categories: Cooling Systems. | Western Australia |
| COOL MAX 100 | This is a general purpose ready to use glycol based treatment for automotive cooling systems. Freezing point is -35 degrees C approx at 50% dilution and -15 degrees C at 35% dilution. Replace at 24 month / 60,000 km intervals. May be replaced more frequently depending on engine and driving conditions. Top up radiator as required to avoid rundown in concentration. This product contains a pH-buffered blend of additives known to reduce the corrosion of steel, cast iron, aluminium alloy, brass, copper and solder. This product exceeds the performance requirements of the following standards when assessed in hard water and is made to General Motors Specification HN 2043. ASTM D1384 " Corrosion Test for Engine Coolants in Glassware.". ASTM D4340 "Corrosion of Cast Aluminium Alloys in Engine Coolants Under Heat Rejecting Conditions.". ASTM D2570 "Simulated Service Corrosion Test for Engine Coolants.". ASTM D2809 "Cavitation Corrosion and Erosion Corrosion Characteristics of Aluminium Pumps With Engine Coolants.". Australian/New Zealand Standard 2108.1:1997 "Engine Coolants Type A and Type B for Engine Cooling Systems.". This product will not reverse pre-existing corrosion problems, and should not be used in conflict with engine manufacturer's recommendations. Uses: Cooling Systems. Product ID: 229. Categories: Cooling Systems. | Western Australia |
| COOL MAX 50 | COOL MAX 50 general purpose concentrated glycol based treatment for automotive cooling systems. Freezing point is -35 degrees C approx. Replace at 24 month / 60,000 km intervals. May be replaced more frequently depending on engine and driving conditions. This product contains a pH-buffered blend of additives known to reduce the corrosion of steel, cast iron, aluminium alloy, brass, copper and solder. It exceeds the performance requirements of the following standards when assessed in hard water and is made to General Motors Specification HN 2043. ASTM D1384 " Corrosion Test for Engine Coolants in Glassware.". ASTM D4340 "Corrosion of Cast Aluminium Alloys in Engine Coolants Under Heat Rejecting Conditions.". ASTM D2570 "Simulated Service Corrosion Test for Engine Coolants.". ASTM D2809 "Cavitation Corrosion and Erosion Corrosion Characteristics of Aluminium Pumps With Engine Coolants.". Australian/New Zealand Standard 2108.1:1997 "Engine Coolants Type A and Type B for Engine Cooling Systems.". This product will not reverse pre-existing corrosion problems, and should not be used in conflict with engine manufacturer's recommendations. Uses: Cooling Systems. Product ID: 221. Categories: Cooling Systems. | Western Australia |
| COOL PLUS CONCENTRATE | This is can be purchased as a concentrated or ready to use organic acid, water-based treatment for automotive cooling systems. It is a phosphate and silicate-free formulation containing a pH-buffered blend of additives known to reduce the corrosion of steel, cast iron, aluminium alloy, brass, copper and solder. It will not reverse pre-existing corrosion problems. It is not an anti-freeze/anti-boil type coolant and should not be used in conflict with engine manufacturers' recommendations. Cool Plus exceed the performance requirements of the following standards: ASTM D1384 "Corrosion Test for Engine Coolants in Glassware" using 20 ml per litre hard water. ASTM D4340 "Corrosion of Cast Aluminium Alloys in Engine Coolants under Heat Rejecting Conditions" using 20ml per litre hard water. Australian/New Zealand Standard 2108.1:1997 "Engine Coolants Type A and Type B for Engine Cooling Systems" using 20-30 ml per litre hard water. Uses: Cooling Systems. Product ID: 233. Categories: Cooling Systems. | Western Australia |
| COOL PLUS MAX | COOL PLUS MAX DESCRIPTION. COOL PLUS MAX is a superior water based corrosion inhibitor based on Organic Additive Technology (OAT), which is a selectively balanced mixture of organic additives. OAT formulations are longer life products than those based on conventional formulations, making OATs the products of choice for general aftermarket servicing. 1:20 Mixing ratio. COOLPLUS MAX is a phosphate ,amine, nitirite and silicate-free formulation containing a pH-buffered blend of additives known to reduce the corrosion of steel, cast iron, aluminium alloy, brass, copper and solder .... Contains 400g per litre of ethylene glycol as well as a bittering agent at 10ppm. Available in red or green. USE. Add 50ml of COOL PLUS MAX to every 1L of demineralised water or 1L of Cool Plus Max treats 20L of demineralised water. Dilute product before adding to the cooling system. To avoid possible incompatibility problems, do not mix with any other inhibitors or coolants. SAFETY. COOL PLUS MAX contains ethylene glycol and is poisonous if swallowed. Read Material Safety Data Sheet before use. Avoid contact with the skin and eyes. Keep out of reach of children. COOL PLUS MAX. Exceeds the performance requirements of the following standards. ASTM D1384 Corrosion Test for Engine Coolants in Glassware. ASTM D4340 Corrosion of Cast Aluminium Alloys in Engine Coolants under Heat Rejecting Conditions. Australian/New Zealand Standard 2108.1:2004 "Engine Coolants Type A and Type B for Engine Cooling Systems" using 40 ml per litre hard water. Heat-stressed Alloy Corrosion: ASTM D4340. Heat Transfer Corrosion Rate: 0.3 mg/cm2/week. Max allowable corrosion: 1.0 mg/cm2/week. Crevice/pitting Attack: None. Uses: Cooling Systems. Product ID: 447. Categories: Cooling Systems. | Western Australia |
| COOL PLUS RTU | This is a ready to use organic acid, water-based treatment for automotive cooling systems. It is a phosphate and silicate-free formulation containing a pH-buffered blend of additives known to reduce the corrosion of steel, cast iron, aluminium alloy, brass, copper and solder. It will not reverse pre-existing corrosion problems. It is not an anti-freeze/anti-boil type coolant and should not be used in conflict with engine manufacturers' recommendations. Cool Plus RTU exceeds the performance requirements of the following standards: See Cool Plus. Uses: Cooling Systems. Product ID: 235. Categories: Cooling Systems. | Western Australia |
| DEMINERALISED WATER | This is water with a low conductivity due to the removal of minerals via the process of reverse osmosis. Uses: Cooling Systems. Product ID: 182. Categories: Cooling Systems. | Western Australia |
| INHIBITED PROPYLENE GLYCOL (IPG) | IPG is a hybrid organic acid / propylene glycol - based antifreeze concentrate for use in those cooling systems where the use of ethylene glycol is not desirable (eg food processing, etc.). IPG is an amine, nitrite, phosphate and silicate - free formulation which contains inhibitors to reduce the corrosion of steel, cast iron, aluminium alloy, brass, copper and solder. IPG should be blended with clean good quality water to suit the cooling system requirements, as outlined in the table below: IPG is not classified as hazardous and is biodegradable. IPG should be blended with clean good quality water to suit the cooling system requirements, as outlined in the table below: IPG concentration in the system may be monitored by measuring the refractive index of the coolant, and topped up as required. Suitable biocides may be added to preserve the coolant if needed. To avoid possible incompatibility problems, do not mix with other coolant formulations. Uses: Cooling Systems. Product ID: 192. Categories: Cooling Systems. | Western Australia |
| NICOMENTHYL®COOL | NICOMENTHYL®COOL is a cosmetic ingredient for skin care and hair care products. It is used to help with the emulsification of oils or in polar oil systems to make them better water-soluble. NICOMENTHYL®COOL allows for improved stability and solubility, which makes it suitable for use in formulations such as creams, lotions, sunscreens, skincare, hair care, body care and sun care applications. Group: Personal care ingredients, cosmetics & toiletries. CAS No. 40594-65-8, 2216-51-5. Composition: Synthetic. Application: Skin Care, Spa & Wellness, Soap & Bath, Oral Care, Hair Care. Function: Active, Emulsifier. Physical Form: Liquid. Recommended Dosage: 0.5-5%. INCI Name: Menthyl Nicotinate, Menthol. Claim: Hair Loss Reduction, Cooling/Warming Effect, Antioxidant, Anti-Cellulite. Product Code: PIM000009388. |  Australia |
| Propylene Glycol 100% Pure PHARMACEUTICAL GRADE | Propylene Glycol (PG) USP is a pharmaceutical grade of Mono-Propylene Glycols (PG or MPG) with a specified purity greater than 99.9%. This food grade glycol is used as a heat transfer liquid in beer dispensing systems and temprite chillers. Using a mix of glycol and water will allow your cooling fluid to go sub-zero allowing icy cold beer and a frosty font. Glycol mixes are also used in jacketed stainless conical fermenters. Pack Sizes: 1, 2, 5 and 10 litre drums. AusLabs : Buy laboratory supplies online with same day shipping direct our warehouse. Categories: Mono Propylene Glycol. |  Australia |
| Propylene Glycol USP | PROPYLENE GLYCOL USP (CAS 57-55-6) is a non-toxic organic raw material that is used for a variety of industrial applications that involve heat transfer systems that operate at temperatures outside the normal freezing and boiling points of water. PROPYLENE GLYCOL USP is commonly used as an anti-freeze, coolant for beer and beverage cooling system (commonly called glycol systems), food manufacturing / processing systems, VAC applications, laser cutting, milk & wine production equipment. Use as required. Pack Sizes: 5 Litre, 20 Litres, 200 Litre, 1000 Litres. Product ID: AC402. Chemicals By Industry, Brewing\, Distillery & Winery, Chemicals By Industry, Food & Beverage Processing, Chemicals By Industry, Laboratory, Chemicals By Industry, Marine, Chemicals By Industry, Workshop. | Australia Wide |
| Versa-TL 3 Dry | Versa-TL 3 Dry is an excellent synthetic polymer. Versa-TL 3 Dry is mainly designed for use in the chemical treatment of boilers and cooling towers preventing the build-up of scale and sludge. Versa-TL 3 Dry dissolves readily in water with slight evolution of heat. Maximum concentration is limited only by viscosity handling capabilities. Iron control for systems up to 1000 psi. Ultra-high temperature stable deflocculants for contaminated and high-density salt muds. Excellent dispersant for stressed conditions, anti-static agent. Group: Personal care ingredients, homecare & institutional cleaning. CAS No. 68037-40-1. Composition: Synthetic. Application: Institutional Cleaner. Physical Form: Powder. Product Code: PIM000041094. | Australia |
Our database is helping our users find suppliers everyday.
