Find where to buy products from Australian suppliers, including: distributors, industrial manufacturers, bulk supplies and wholesalers of raw ingredients & finished goods.
Search for products or services, then visit the suppliers website for prices, SDS or more information. You can also view suppliers in NZ, UK or the USA.
| Product | Description | |
|---|---|---|
| COOL MAX 100 | This is a general purpose ready to use glycol based treatment for automotive cooling systems. Freezing point is -35 degrees C approx at 50% dilution and -15 degrees C at 35% dilution. Replace at 24 month / 60,000 km intervals. May be replaced more frequently depending on engine and driving conditions. Top up radiator as required to avoid rundown in concentration. This product contains a pH-buffered blend of additives known to reduce the corrosion of steel, cast iron, aluminium alloy, brass, copper and solder. This product exceeds the performance requirements of the following standards when assessed in hard water and is made to General Motors Specification HN 2043. ASTM D1384 " Corrosion Test for Engine Coolants in Glassware.". ASTM D4340 "Corrosion of Cast Aluminium Alloys in Engine Coolants Under Heat Rejecting Conditions.". ASTM D2570 "Simulated Service Corrosion Test for Engine Coolants.". ASTM D2809 "Cavitation Corrosion and Erosion Corrosion Characteristics of Aluminium Pumps With Engine Coolants.". Australian/New Zealand Standard 2108.1:1997 "Engine Coolants Type A and Type B for Engine Cooling Systems.". This product will not reverse pre-existing corrosion problems, and should not be used in conflict with engine manufacturer's recommendations. Uses: Cooling Systems. Product ID: 229. Categories: Cooling Systems. |  Western Australia |
| COOL MAX 50 | COOL MAX 50 general purpose concentrated glycol based treatment for automotive cooling systems. Freezing point is -35 degrees C approx. Replace at 24 month / 60,000 km intervals. May be replaced more frequently depending on engine and driving conditions. This product contains a pH-buffered blend of additives known to reduce the corrosion of steel, cast iron, aluminium alloy, brass, copper and solder. It exceeds the performance requirements of the following standards when assessed in hard water and is made to General Motors Specification HN 2043. ASTM D1384 " Corrosion Test for Engine Coolants in Glassware.". ASTM D4340 "Corrosion of Cast Aluminium Alloys in Engine Coolants Under Heat Rejecting Conditions.". ASTM D2570 "Simulated Service Corrosion Test for Engine Coolants.". ASTM D2809 "Cavitation Corrosion and Erosion Corrosion Characteristics of Aluminium Pumps With Engine Coolants.". Australian/New Zealand Standard 2108.1:1997 "Engine Coolants Type A and Type B for Engine Cooling Systems.". This product will not reverse pre-existing corrosion problems, and should not be used in conflict with engine manufacturer's recommendations. Uses: Cooling Systems. Product ID: 221. Categories: Cooling Systems. | Western Australia |
| COOL PLUS CONCENTRATE | This is can be purchased as a concentrated or ready to use organic acid, water-based treatment for automotive cooling systems. It is a phosphate and silicate-free formulation containing a pH-buffered blend of additives known to reduce the corrosion of steel, cast iron, aluminium alloy, brass, copper and solder. It will not reverse pre-existing corrosion problems. It is not an anti-freeze/anti-boil type coolant and should not be used in conflict with engine manufacturers' recommendations. Cool Plus exceed the performance requirements of the following standards: ASTM D1384 "Corrosion Test for Engine Coolants in Glassware" using 20 ml per litre hard water. ASTM D4340 "Corrosion of Cast Aluminium Alloys in Engine Coolants under Heat Rejecting Conditions" using 20ml per litre hard water. Australian/New Zealand Standard 2108.1:1997 "Engine Coolants Type A and Type B for Engine Cooling Systems" using 20-30 ml per litre hard water. Uses: Cooling Systems. Product ID: 233. Categories: Cooling Systems. | Western Australia |
| COOL PLUS MAX | COOL PLUS MAX DESCRIPTION. COOL PLUS MAX is a superior water based corrosion inhibitor based on Organic Additive Technology (OAT), which is a selectively balanced mixture of organic additives. OAT formulations are longer life products than those based on conventional formulations, making OATs the products of choice for general aftermarket servicing. 1:20 Mixing ratio. COOLPLUS MAX is a phosphate ,amine, nitirite and silicate-free formulation containing a pH-buffered blend of additives known to reduce the corrosion of steel, cast iron, aluminium alloy, brass, copper and solder .... Contains 400g per litre of ethylene glycol as well as a bittering agent at 10ppm. Available in red or green. USE. Add 50ml of COOL PLUS MAX to every 1L of demineralised water or 1L of Cool Plus Max treats 20L of demineralised water. Dilute product before adding to the cooling system. To avoid possible incompatibility problems, do not mix with any other inhibitors or coolants. SAFETY. COOL PLUS MAX contains ethylene glycol and is poisonous if swallowed. Read Material Safety Data Sheet before use. Avoid contact with the skin and eyes. Keep out of reach of children. COOL PLUS MAX. Exceeds the performance requirements of the following standards. ASTM D1384 Corrosion Test for Engine Coolants in Glassware. ASTM D4340 Corrosion of Cast Aluminium Alloys in Engine Coolants under Heat Rejecting Conditions. Australian/New Zealand Standard 2108.1:2004 "Engine Coolants Type A and Type B for Engine Cooling Systems" using 40 ml per litre hard water. Heat-stressed Alloy Corrosion: ASTM D4340. Heat Transfer Corrosion Rate: 0.3 mg/cm2/week. Max allowable corrosion: 1.0 mg/cm2/week. Crevice/pitting Attack: None. Uses: Cooling Systems. Product ID: 447. Categories: Cooling Systems. | Western Australia |
| SHIELDEX® AC5 | SHIELDEX® non-phosphate, chromium free anti-corrosive pigments protect metal when used in coil coating primers, general industrial primers, and primers for automotive and marine coatings. This highly effective, post-addable corrosion inhibitor provides a non-toxic alternative to chrome (VI) and zinc phosphate compounds to produce paints and radiation cured coatings. SHIELDEX® rust-inhibiting pigment performance has been extensively tested under a variety of conditions and has been proven by accelerated and innovative natural weathering technology. Group: Specialty chemicals, paints & coatings. CAS No. 7631-86-9. Composition: Ion-exchanged silica. Application: CanCoil and Industrial. Function: PIGMENTSAnticorrosive Pigment. Physical Form: Micronized Powder. Product Code: PIM000046484. |  Australia |
| SHIELDEX® C 500 | Graces new SHIELDEX® C 500 anti-corrosive pigment combines effective anti-corrosive properties in an economical and environmentally safe product. With improved corrosion resistance, the latest generation of our SHIELDEX® silica product is ideal for any coil or metal coating application. SHIELDEX® C 500 pigments are micronized particles of controlled particle size distribution. The pigments are not classified as toxic and contain only technically unavoidable traces of heavy metals originating from raw materials. They are highly effective due to their structural design and can be used in a wide variety of resin systems. Group: Specialty chemicals, paints & coatings. CAS No. 7631-86-9. Application: CanCoil and Industrial. Function: PIGMENTSAnticorrosive Pigment. Physical Form: Micronized Powder. Product Code: PIM000043080. | Australia |
Our database is helping our users find suppliers everyday.
