Find where to buy products from Australian suppliers, including: distributors, industrial manufacturers, bulk supplies and wholesalers of raw ingredients & finished goods.
Search for products or services, then visit the suppliers website for prices, SDS or more information. You can also view suppliers in NZ, UK or the USA.
| Product | Description | |
|---|---|---|
| ALBA - Bore Water Liquid Antibacterial Acid. ALBA Liquid controls problems in water bores which have never been accomplished in the past with muriatic acid, chlorine or sequestering agents. ALBA PLUS controls iron bacteria in Wells and Water Bores after each treatment. Chlorine gives only surface sterilisation on iron bacteria but is unable to dissolve iron bacteria encrustations, dissolves slime and organic deposits of iron bacteria and holds them in solution until they are pumped out, recommended for complete bore clean-out of iron bacteria, unites with the oxide forms of iron and manganese to form soluble salts which are held in solution until pumped out to waste. Chlorine does not have the ability to perform this function, which is referred to as chelating. | FEATURES: Kills iron bacteria, Dissolves iron bacteria encrustations, organic deposits of iron bacteria, slime and hard water scale formed on the screens, Eliminates water stains caused by iron manganese oxides, Generally increases water bores production. Improves taste of water when made disagreeable by bacteria. Sizes available: 20 litre - 205 Litre Drums. CHEMDREX CHEMICALS: Water Treatment Chemicals dedicated to finding solutions to the problems encountered by groundwater users. Bore Water Quality Solutions. Categories: Water Bore Cleaning Chemicals, Well Drillers, Wells & Bore Water Treatment Products, Iron Oxide Bacteria Remover, Iron Bacteria Solutions. |  Nationwide |
| ALBA PLUS - Bore Water Treatment Chemicals. ALBA PLUS removes iron bacteria, used for water bore clean-out and maintenance. Corrects problems in water bores which have never been accomplished in the past with muriatic acid, chlorine or sequestering agents combined or in series. ALBA PLUS controls iron bacteria after each treatment, dissolves slime and organic deposits of iron bacteria and holds them in solution until they are pumped out, recommended for complete bore clean-out of iron bacteria, unites with the oxide forms of iron and manganese to form soluble salts which are held in solution until pumped out to waste. | FEATURES: Kills iron bacteria, Eliminates water stains caused by iron manganese oxides, Dissolves iron bacteria encrustations, organic deposits of iron bacteria, slime and hard water scale formed on the screens. Sulphides and metallic oxides are held in suspension until pumped out. Improves taste of water when made disagreeable by bacteria. Sizes available: 20 litre - 205 Litre Drums. CHEMDREX CHEMICALS: Water Treatment Chemicals dedicated to finding solutions to the problems encountered by groundwater users. Bore Water Quality Solutions. Categories: Iron Bacteria Removers, Water Bores Cleaning Chemicals, Iron Bacteria Solutions, Wells & Bore Water Treatment Products, Well Drillers, Iron Oxide Well Cleaners. | Nationwide |
| Dichloromethane, stabilized with approx. 50 ppm of amylene, Multisolvent ® | 4l Pack CL03474000 75-09-2 Scharlau |  Nationwide, South Australia (SA) |
| Tetrahydrofuran, GPC grade, stabilized with 250 ppm of BHT, Multisolvent ® ACS | 2.5L Pack TE02282500 109-99-9 Scharlau | Nationwide, South Australia (SA) |
| Tetrahydrofuran, GPC grade, stabilized with 250 ppm of BHT, Multisolvent ® ACS | 4l Pack TE02284000 109-99-9 Scharlau | Nationwide, South Australia (SA) |
| 1, 3- Propanediol ( natural, made by fermentation | Propanediol can be widely recommended to use as the functions of. moisturizing, preservative, solvent, skin conditioning in cosmetics. Uses: Cosmetics. Category: Chemical. Alternative Names: 1, 3- Propanediol. Grades: Cosmetic Grade. Approvals: Australian Industrial Chemicals Introduction Scheme (AICIS). CAS No. 504-63-2. Pack Sizes: 1000kgs ibc. |  |
| Find where to buy chemicals in Australia | Search our extensive list of Australian chemical suppliers. Products include: essential oils; alcohols; paints; coatings; solvent suppliers; food & pharmaceuticals; greases; cleaning products & pool chemical supplies Australia; cosmetic & personal care; lubricants; flame retardants; specialty chemicals; school chemical supplies; reagents; herbicides; fertilisers; pigments; hospitality chemicals; farm & dairy chemicals; safety and spill equipment. find manufacturers, distributors, retail and bulk wholesale suppliers for all of your chemical companies purchasing requirements. |  |
| ABSOLUTE - Alkaline water based degreaser, biodegradable. | Heavy Duty Industrial Cleaners. pH of about 9.5 so it can damage old paint or weaker fabrics. Boosted with Butyl Icinol. Because it is water based and built on totally biodegradable surfactants it meets the Australian standard for Biodegradability. USED IN: Degreasing engine bays, Cleaning of soot & carbon from most fibreglass and painted surfaces, Chassis Cleaner, Emulsifying grease and oil prior to discharge, Removal of fat & grease from kitchens, Dissolving body fat build up in bathrooms, Emulsifying grease and fat in ducts and piping systems. Distributors of WHOLESALE CHEMICALS & CLEANING PRODUCTS to the Far North Queensland region including the Atherton Tablelands the Cape & Thursday Island. Categories: Degreasing, Industrial and Commercial Cleaning |  Cairns, Queensland QLD |
| A-C® 1702 | A-C® 1702 is grease like, low temperature, completely amorphous, low density polyethylene (PE) homopolymer for use in solvent borne coatings, heat set, sheet fed solvent borne inks, and specialty digital and UV/EB inks to provide mar and rub resistance by lowering the coefficient of friction. Also used in lubricants to provide release. Will act as a plasticizer in paraffin based candles, especially large volume candles, to resist cracking. Group: Specialty chemicals, polymers. CAS No. 9002-88-4. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.1~2%. Certification: REACH. Product Code: PIM000007932. |  Australia |
| A-C 405M | A-C 405M is an ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 8%, for use in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 24937-78-8. Composition: EVA WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Automotive Paints. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007909. | Australia |
| A-C 405T | A-C 405T is an ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 6%, for use in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 24937-78-8. Composition: EVA WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Automotive Paints. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007911. | Australia |
| A-C® 540 | A-C® 540 is an ethylene acrylic acid (EAA) copolymer in a prill form, with an acrylic acid (AA) content of 5%, for use in adhesives to promote adhesion to various substrates. It is also used in aqueous floor polishes to provide drag (raising the coefficient of friction) thereby controlling the final coefficient of friction. Its acid number of 40 aids emulsification. Also used in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. Group: Specialty chemicals, polymers. Composition: EVA WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007917. | Australia |
| A-C 540A | A-C 540A is an ethylene acrylic acid (EAA) copolymer in a powdered form, with an acrylic acid (AA) content of 5%, for use in adhesives to promote adhesion to various substrates. It is also used in aqueous floor polishes to provide drag (raising the coefficient of friction) thereby controlling the final coefficient of friction. Its acid number of 40 aids emulsification. Also used in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. Is a dispersing agent for color masterbatch in engineering resins. Excellent external lubricant for polyamide compounds. Group: Specialty chemicals, polymers. CAS No. 9010-77-9. Composition: PP-PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 2.0%. Certification: REACH. Product Code: PIM000007912. | Australia |
| AC-580 | A-C 580 ethylene acrylic acid (EAA) copolymer in a prill form, with an acrylic acid (AA) content of 10%, for use in adhesives to promote adhesion to various substrates. It is also used in aqueous floor polishes to provide drag (raising the coefficient of friction) thereby controlling the final coefficient of friction. Its acid number of 75 aids emulsification. Also used in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. Group: Specialty chemicals, polymers. CAS No. 9002-88-4. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.1~2%. Certification: REACH. Product Code: PIM000007931. | Australia |
| A-C 6 | A-C 6 is a low density polyethylene (LDPE) homopolymer in a prill form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. Can also be partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. Used in cable flooding compounds, along with polybutene. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 9002-88-4. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Adhesives & Sealants. Function: Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.1~2%. Certification: REACH. Product Code: PIM000007910. | Australia |
| A-C® 617 | A-C® 617 is a low density polyethylene (LDPE) homopolymer in a prill form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. Can also be partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. Is used as a dispersing agent in color masterbatch applications. In PVC applications it finds use as an external lubricant. Group: Specialty chemicals, polymers. Composition: EVA WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007918. | Australia |
| A-C 629 | A-C 629 is a low density Oxidized Polyethylene (LDOxPE) homopolymer in prill form for use in solvent borne coatings as a rheological aid. It also finds use as a metal release agent in PVC. It can also be atmospherically emulsified for use in aqueous applications, such as textiles, lubricants, coatings and inks, to lower the COF and provide surface properties such as mar & abrasion resistance and increased slip. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 68441-17-8. Composition: OPE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Others. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007914. | Australia |
| A-C® 629A | A-C® 629A is a Low density Oxidized Polyethylene (LDOxPE) homopolymer in prill form for use in solvent borne coatings as a rheological aid. It also finds use as a metal release agent in PVC. It is a pigment dispersing agent for color masterbatch. A-C® 629A can also be atmospherically emulsified for use in aqueous applications, such as textiles, lubricants, coatings and inks, to lower the COF and provide surface properties such as mar & abrasion resistance and increased slip. Group: Specialty chemicals, polymers. CAS No. 68441-17-8. Composition: Low Density Oxidized Polyethylene. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: Waxes, Dispersing Agents. Physical Form: Solid. Recommended Dosage: 0.3-0.8%. Certification: REACH. Product Code: PIM000007905. | Australia |
| A-C 680 | A-C 680 is low density Oxidized Polyethylene (LDOxPE) homopolymer in prill form for use in solvent borne coatings as a rheological aid. It can also be atmospherically emulsified for use in aqueous applications, such as textiles, lubricants, coatings and inks, to lower the COF and provide surface properties such as mar &, abrasion resistance and increased slip. It can also be used as an anti transpirant coating to delay fruit spoilage allowing longer storage and transport times. It also finds use as a metal release agent in PVC. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 68441-17-8. Composition: OPE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Others. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 2.0%. Certification: REACH. Product Code: PIM000007927. | Australia |
| A-C® 6A | A-C® 6A is a homopolymer in a powdered form; for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. A-C® 6A can be also partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. Used in cable flooding compounds, along with polybutene. Is used as a dispersing agent in color masterbatch applications. Group: Specialty chemicals, polymers, paints & coatings. CAS No. 9002-88-4. Composition: Low Density Polyethylene. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Powder Coating, Printing Inks. Function: Waxes, Dispersing Agents, POLYMERS, Polystyrene (PS). Physical Form: Micronized Powder. Recommended Dosage: 0.1~2%. Certification: REACH, Food Contact, PICCS. Product Code: PIM000007906. | Australia |
| A-C 8 | A-C 8 is low density polyethylene (LDPE) homopolymer in a prill form, for use in solvent borne coatings, heatset and liquid solvent borne inks,to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. Can also be partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. Group: Specialty chemicals, polymers. CAS No. 9002-88-4. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.5%. Certification: REACH. Product Code: PIM000007922. | Australia |
| A-C® 9A | A-C® 9A is low density polyethylene (LDPE) homopolymer in a powdered form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. Can also be partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. Best choice in cable filling compounds to prevent oil bleed at high temperatures. Is used as a dispersing agent in color masterbatch applications. Group: Specialty chemicals, polymers. CAS No. 9002-88-4. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers. Function: Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.1~2%. Certification: REACH. Product Code: PIM000007929. | Australia |
| ACETIC ANHYDRIDE | Acetic Anhydride suppliers. MINIMUM QUANTITY 25 KGS. Australian suppliers of specialist Solventsl. |  CCC Ingredients: NSW, QLD, SA, WA, VIC, TAS |
| Acetone | Acetone - Ketones - ASCC Australian suppliers and distribution of Solvents, Chemicals & Resins. Sizes available including: Bulk, Drums and 1000 litres. Categories: Dimethylketone, 2-propanone, Pyroacetic Ether, formula (CH3)2CO. Buy Acetone in 20 Litres (16 KG), 160 kg 200 litre Drums, 1000 litre IBC's (Intermediate bulk container) and ASCC is a major bulk Acetone Suppliers in Australia and other Industrial Chemicals Australia. Categories: Dimethyl Ketone, Propan-2-One. |  Queensland QLD, New South Wales NSW, Victoria VIC |
| Acetone | Solvent. Pack Sizes: 5L, 20L, 200L, 1000 Litres. Categories: 2-propanone, 67-64-1, propanone, dimethyl ketone, propan-2-one. |  QLD, NSW, SA, WA, VIC, TAS |
| ACETONE | ACETONE is a clear, colourless, low boiling easy pouring liquid with a sweetish odour, and is highly flammable and completely soluble in water, alcohols, and other organic liquids. ACETONE is used mostly for solvent application, as well as an ingredient to produce MMA, MIBK Bisphenol-A. Group: Specialty chemicals, paints & coatings. CAS No. 67-64-1. Composition: 2-propanone, dimethyl ketoneDMK. Application: Architectural and Deco., Automotive Paints. Function: SOLVENTSOther. Physical Form: Liquid. Product Code: PIM000060293. | Australia |
| Acetone - Solvent | ACETONE is a pharmaceutical grade 100% acetone solvent which is ideal in many industries as a cleaner and sanitiser. ACETONE can be used to remove nail polishes, adhesives, scuff marks on floors, permanent marker stains, ink stains on clothing. It also dissolves superglue, removes melted plastic and sticker gunk from glass & metals. This product is classified DG. Pack Sizes: 5 Litre, 20 Litres. Product ID: RM00001. Chemicals By Industry, Automotive, Chemicals By Industry, Laboratory, Chemicals By Industry, Workshop. |  Australia Wide |
| ACETULAN | A lanolin derived emollient primarily used in cleansers and makeup removers. Acts as a functional, low viscosity emollient and lubricant. Possesses solvent, spreading and degreasing properties. Uses: Sun care (Sun protection, After-sun and Self-tanning) Skin care (Facial care, Facial cleansing, Body care, Baby care) Creams, lotions and gels. Group: Personal Care; Cosmetic Raw Materials; Emollients; Lubricants. Alternative Name: Cetyl Acetate, Acetylated Lanolin Alcohol. Grade: Cosmetics. CAS Number: 629-70-9, 61788-49-6. Pack Sizes: 250g, 500 grams, 1kg, 5 kgs, 10kg. |  Australia & Worldwide |
| A-C POLYETHYLENE WAXES | POLYETHYLENE WAXES is low density polyethylene (LDPE) homopolymer in a powdered form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF(Coefficient of Friction). It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs (Hot Melt Adhesives). Can also be partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. In PVC applications it finds use as an external lubricant. Main application is in lip care, eye makeup & hair wax. Group: Personal care ingredients, cosmetics & toiletries. CAS No. 9002-88-4. Composition: Natural derived. Application: Color Care, Hair Care. Physical Form: Powder. INCI Name: Polyethylene. Product Code: PIM000027995. | Australia |
| Acrylic & Acrylic-Styrene copolymers | Surface Coating Resins - ASCC Australian suppliers and distribution of Solvents, Chemicals & Resins. Sizes available including: Bulk, Drums and 1000 litres. | Queensland QLD, New South Wales NSW, Victoria VIC |
| Acrylic Polyols | Surface Coating Resins - ASCC Australian suppliers and distribution of Solvents, Chemicals & Resins. Sizes available including: Bulk, Drums and 1000 litres. | Queensland QLD, New South Wales NSW, Victoria VIC |
| Acrysol ASE-60 | ACRYSOL ASE-60 by DOW is an APEO-free*, solvent-free* acid-containing, alkali-soluble emulsion (ASE) thickener for paint and latex coatings. When neutralized with a base such as sodium hydroxide or TEA, this product effectively increases low-shear (Brookfield) viscosity to deliver coatings with highly shear-thinning characteristics. This product is delivered as a high-solids liquid for ease of handling in manufacturing. Interior and exterior paints. Wide range of sheen through high gloss paints, including low-VOC formulations. Water-based architectural and industrial coatings. Utility with all binder types. Additive Applications. Exterior Insulation Finish Systems (EIFS). Paint/coatings. Paper. Textiles. Paper processing and finishing. Building and Construction. Nonwoven binders. General industrial finishes. Art conservation applications. Water-based industrial baking enamels. Benefits. Broad formulation latitude. Ease of handling. Use over a wide pH range. Reduced levels required for comparable rheology. Improved gloss development versus HEC. Most offerings ideal for low VOC formulations. Pack Sizes: 20 Litres, 200 Litre, 1000 Litres. Product ID: RM0180. Chemicals By Industry, Building & Construction, Chemicals By Industry, Chemicals By Industry, Universal Products. | Australia Wide |
| Active Plus - Sugar Soap | ACTIVE PLUS is sugar soap concentrate that combines a high level of detergency and solvency in one product to perform both cleaning and degreasing quickly and efficiently on most surfaces not harmed by water alone. ACTIVE PLUS is ideal for cleaning of vehicles, engines, floors, walls and equipment. Apply neat or diluted via a spray bottle, foam gun, pressure cleaner, cloth, sponge, brush, mop or soak method. Carpet spotting dilute 1:1. Motor degreasing dilute 1:1. Vehicle exterior washing dilute 1:20. Floor Cleaning dilute 1:50. Vinyl Cleaner dilute 1:20. Upholstery dilute 1:25. Spray & Wipe 1:25 to 1:50. * We are transitioning this product to a blue colour by removing the yellow dye. Why is this product so good at a lot of applications?. Active plus is a blend of detergents and solvents which give this product a wider range of uses. Is Active Plus okay to use in a food areas. Yes, providing the product does not come in direct contact with food. Always flush surface once cleaned with copious amounts of water. Pack Sizes: 1 Litre, 5 Litre, 20 Litres, 205 Litre Drums. Product ID: AC333. Chemicals By Industry, Automotive, Chemicals By Industry, Janitorial & Maintenance. | Australia Wide |
| ACUMIST C-5 | ACUMIST C-5 is medium particle size micronized Polyethylene Homopolymer for use in solvent borne coatings and solvent based flexographic inks. As with all ACumist products, it is insoluble in solvents and UV based monomers and oligomers at room temperature. best suited goroffset inks, can coatings , and all thin film solvent based coatings. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 68441-17-8. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Adhesives & Sealants. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.5~1%. Certification: REACH. Product Code: PIM000007930. | Australia |
| ACUMIST D-6 | ACUMIST D-6 is micronized Polyethylene Homopolymer for use and general purpose solvent borne coatings, stains and lacquers, and gravure inks. It provides a good balance of properties where economics are of paramount concern. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 68441-17-8. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Adhesives & Sealants. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.5~1%. Certification: REACH. Product Code: PIM000007933. | Australia |
| ACUMIST D-9 | D-9 Micronized Polyethylene Homopolymer for use general purpose solvent borne coatings, stains and lacquers, and gravure inks. It provides a good balance of properties where economics are of paramount concernMostlu used in Gravure inks for slip and rubs. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 68441-17-8. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Adhesives & Sealants. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.5~1%. Certification: REACH. Product Code: PIM000007934. | Australia |
| ACUMIST P-10 | ACUMIST P10 is micronized polypropylene for matting and non-skid or non-slip applications for industrial solvent coatings. Excellent abrasion resistance. Used in Powder Coating for matting and scratch resistance. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 68441-17-8. Composition: PE WAX. Application: Masterbatch & Compounders, Polymer Producers, Rubber & Elastomers, Adhesives & Sealants. Function: ADDITIVES, Waxes. Physical Form: Micronized Powder. Recommended Dosage: 0.5~1%. Certification: REACH. Product Code: PIM000007935. | Australia |
| ADPA - Bore Water Dry Penetrating Acid. ADPA Concentrated inhibited dry acid with a penetrant. The penetrant speeds up acid penetration into formations and accumulations of scale & corrosive material on casings & screens. This dry acid in inhibited for more concentrated use and is safe to use on all metals, rubbers & plastics. | USED FOR: Cleaning bore screens, casings, the gravel pack and the water bearing formation of deposits of mineral scale (calcium carbonate is the most common). Particularly useful in conjunction with a mechanical clean out. Water bore production in sandstone & limestone formations or in highly calcareous sand and gravel can be increased by action of the acid in dissolving part of the formation, the acid dissolves carbonates into harmless carbon dioxide. FEATURES: The acid penetrates the hardest encrustations in bores, converting these deposits into soluble salts which are easily pumped out. Rapid attack rate removes calcium & magnesium scales and also kills annoying algae slime found in some bores; Excellent mud dispersing qualities. Controls Calcium and Magnesium scales. Sizes available: 20 litre - 205 Litre Drums. CHEMDREX CHEMICALS: Water Treatment Chemicals dedicated to finding solutions to the problems encountered by groundwater users. Bore Water Quality Solutions. Categories: Wells & Bore Water Treatment Products, Calcium Scale Remover, Water Bore Cleaning Chemicals, Well Drillers | Nationwide |
| AEROFLOAT® A SODIUM PROMOTER | AEROFLOAT® A SODIUM PROMOTER is an aqueous solution of sodium diethyl dithiophosphate used in the flotation of copper and zinc sulfides in the presence of pyrite and other iron sulfides. AEROFLOAT® A SODIUM PROMOTER is commonly used in the mineral processing application. Group: Specialty chemicals, electronic & specialties. CAS No. 3338-24-7. Composition: Sodium diethyldithiophosphate. Application: Mining. Function: SOLVENTS, Other. Physical Form: Liquid. Product Code: PIM000039188. | Australia |
| AEROPHINE® 3418A PROMOTER | AEROPHINE® 3418A PROMOTER is a unique, phosphine-based collector which was originally developed for the flotation of copper and activated zinc minerals. AEROPHINE® 3418A PROMOTER displays the benefits of lowering dosages required than traditionally used non-selective collectors. Low frothing characteristics, even on ores containing clay minerals. Good collection of coarse middling particles. Chemically stable compound and easy-to-handle & Attractive Health, Safety, and Environment profile. AEROPHINE® 3418A PROMOTER is commonly used in mineral processing in polymetallic ores & primary copper ores. Group: Specialty chemicals, electronic & specialties. Composition: Phosphine. Application: Mining. Function: SOLVENTS, Other. Physical Form: Liquid. Product Code: PIM000039189. | Australia |
| ALBACHEM PSR | Dry Cleaning Solvent in a pressure can. AlbaChem PSR removes tough stains from all fabrics without harming delicate fibres. Unlike other powdered sprays PSR contains no chlorinated solvents and is no toxic. PSR has low odour, will not ring, and dries quickly. Group: Dry Cleaning Solvents & Chemicals. Universal Drycleaning Solutions. |  Universal Dry Cleaning Solutions |
| ALBACHEM VLR | Vinyl Letter Remover. AlbaChem Vinyl Letter Removing (VLR) solvent removes vinyl letters and residues from most fabrics. Its a spot cleaning essential thats easy to use, safe, and environmentally friendly. Comes in 591ml bottles. Group: Dry Cleaning Solvents & Chemicals. Universal Drycleaning Solutions. | Universal Dry Cleaning Solutions |
| ALBAWHITE 70 | ALBAWHITE 70 is a German madenatural barium sulfate concentrate, ALBAWHITE 70 is a good dispersable extender. ALBAWHITE 70 offers a list of great benefits and properties; as resistant to acids and alkalis, insoluble in water and organic solvents, lightfast and weatherproof, high brightness, colour neutral due to low refractive index, extremely low electrical conductivity, low binder demand & low abrasiveness due to low silica content. ALBAWHITE 70 is suitable for anti-corrosive paints & facade paints, powder coatings, adhesives & sealants, and plastics production. Group: Specialty chemicals, paints & coatings. Composition: Barium sulphate concentrates. Application: Powder Coating, Automotive Paints, Adhesives & Sealants. Function: ADDITIVES, Dispersing Agents. Physical Form: Nano powder. Product Code: PIM000034637. | Australia |
| ALCOSPERSE 747 | ALCOSPERSE 747 is a versatile dispersant that is used in a variety of industrial applications. It is particularly effective in dispersing solids in water-based systems, making it an essential ingredient in the production of a wide range of products, including use in detergent and cleaning formulations. One of the key benefits of Alcosperse 747 is its ability to improve the stability and flow properties of the end product. This makes it an ideal choice for applications where a smooth, even finish is required. Additionally, Alcosperse 747 is highly effective at preventing the settling of solids, which can lead to uneven coatings and reduced product quality. Alcosperse 747 is also extremely easy to use. It is water-soluble, which means that it can be added directly to the mixing tank without the need for any additional solvents or dispersing agents. This saves time and simplifies the production process, while also reducing costs. Group: Personal care ingredients, homecare & institutional cleaning. Composition: Synthetic. Application: Dishwashing, Institutional Laundry, Laundry. Function: Dispersing Agent. Physical Form: Liquid. INCI Name: Hydrophobically modified copolymer. Product Code: PIM000058574. | Australia |
| Alkaline Cleaning Powder | ALKALINE CLEANING POWDER is an off-white powder with a pine odour and is formulated to remove paint, carbon, oils, grease and other obstinate soils from copper and ferrous metal. Use via soak tank method. ALKALINE CLEANING POWDER should be mixed slowly into cold water. Agitate to make sure all product is thoroughly dissolved. The bath should be constructed of mild steel and have a drain at the bottom of the tank to make dislodging and draining easier. Alloys and amphoteric metals cannot be used in this bath as they will react and seriously impair the solution performance. ALKALINE CLEANING POWDER should be used at 100gms per litre of water at 80 °C if possible. Parts should be immersed the solution and agitated if an agitator is fitted to the bath. Parts should be rinsed with water to flush away residual product after removing from the bath. Use 100 to 200gms of the product to a litre of water if a cold and still bath is necessary. NOTE: Plan the bath to completely immerse the parts that need cleaning. The bath can be used repeatedly until it is completely attenuated. Pack Sizes: 10KG. Product ID: AC637. Chemicals By Industry, Workshop. | Australia Wide |
| Alkyd Resins (Long, Medium & Short) | Surface Coating Resins - ASCC Australian suppliers and distribution of Solvents, Chemicals & Resins. Sizes available including: Bulk, Drums and 1000 litres. | Queensland QLD, New South Wales NSW, Victoria VIC |
| All Purpose Thinners | Blended Chemicals - ASCC Australian suppliers and distribution of Solvents, Chemicals & Resins. Sizes available including: Bulk, Drums and 1000 litres. Categories: Thinners. | Queensland QLD, New South Wales NSW, Victoria VIC |
| Aloe Vera [200:1] Powder - Fruit & Herbal Powder Extracts (Bulk) | This is a 200:1 powdered aloe which means that to re-constitute it so that it is a single strength Aloe Liquid you need to add only 0.5g of Aloe Powder to 99.5g of Water (0.5% to 99.5%). The Aloe Powder will completely dissolve into water but will not form a gel. This is because the pulverising and powder processing breaks up the complex sugar chains into smaller chain lengths that can no longer form a gel. This does not impact in the performance of the Aloe in your product though as the minerals and moisturising properties remain. To thicken your Aloe Water we recommend adding something like Xanthan Gum, Carrageenan, Hydroxyethyl Cellulose or Carbomer. These thickeners will swell in water to form a gel-like base that can then be used as a facial serum base or just as a soothing Aloe Gel. Otherwise we do sell a ready-made aloe gel. In addition to thickning the Aloe Water the water will also need preserving. We have a range of preservatives available to suit a wide range of ingredient philosophies and product asperations. Use Level: Typically re-constituted at 0.5% in water but can be used at any level between 0.05-5%. Solubility: Fully water soluble with no residue. Forms a colourless, water-thin solution when re-hydrated. Compatibility: Generally compatible with most other actives, can be too salty for some emulsions and can cause creams to become destabilised in some cases. We do recommend stability testing when replacing regular water for reconstituted aloe water in a formula. Please Note: These products are for cosmetic use only and not to be consumed. Group: Extracts. Alternative Names: Aloe Barbadensis Leaf Juice Powder, Aqua. EINECS: 287-390-8, 231-791-2. CAS No. 85507-69-3, 7732-18-5. Pack Sizes: 15G; 100G; 500G; 1KG; 5KG; 20KG and above upon request. Product ID: EXTRALVERPOW. |  Worldwide |
| ALTASOLV H | ALTASOLV H is recommended to be used as stand alone solvent or co-solvent for EC formulations.ALTASOLV?green agrochemical solvents provide high performance in challenging conditions, such as hard water and cold temperatures, while helping formulators reduce their carbon footprint. ALTASOLV improves formulations with additional adjuvant benefits offering rainfastness tailored to meet your formulation needs combined with additional anti-leaching and penetration properties. ALTASOLVs high compatibility with other solvents and surfactants provides flexibility, ease of handling and formulation robustness for customers. Group: Specialty chemicals, electronic & specialties. Composition: Proprietary Mixture of Green Organic Low VOC Solvents. Application: Plant & Crop Protection. Function: SOLVENTSOther. Physical Form: Liquid. Claim: Bio-Based, Biodegradable, Circularity, Renewable. Product Code: PIM000043007. | Australia |
| ALTASOLV L | ALTASOLV L is recommended to be used as stand alone solvent or co-solvent for EC formulations. ALTASOLV. green agrochemical solvents provide high performance in challenging conditions, such as hard water and cold temperatures, while helping formulators reduce their carbon footprint. ALTASOLV improves formulations with additional adjuvant benefits offering rainfastness tailored to meet your formulation needs combined with additional anti-leaching and penetration properties. ALTASOLVs high compatibility with other solvents and surfactants provides flexibility, ease of handling and formulation robustness for customers. Group: Specialty chemicals, electronic & specialties. Composition: Proprietary Mixture of Green Organic Low VOC Solvents. Application: Plant & Crop Protection. Function: SOLVENTSOther. Physical Form: Liquid. Claim: Circularity, Renewable, Bio-Based, Biodegradable. Product Code: PIM000043009. | Australia |
| ALTASOLV M | ALTASOLV M is recommended to be used as stand alone solvent or co-solvent for EC formulations. ALTASOLV green agrochemical solvents provide high performance in challenging conditions, such as hard water and cold temperatures, while helping formulators reduce their carbon footprint. ALTASOLV improves formulations with additional adjuvant benefits offering rainfastness tailored to meet your formulation needs combined with additional anti-leaching and penetration properties. ALTASOLVs high compatibility with other solvents and surfactants provides flexibility, ease of handling and formulation robustness for customers. Group: Specialty chemicals, electronic & specialties. Composition: Proprietary Mixture of Green Organic Low VOC Solvents. Application: Plant & Crop Protection. Function: SOLVENTSOther. Physical Form: Liquid. Claim: Bio-Based, Biodegradable, Circularity, Renewable. Product Code: PIM000043008. | Australia |
| AMBER PET MASTERBATCH 66N12521 | AMBER PET MASTERBATCH 66N12521 is a high-quality masterbatch designed to enhance PET-based products' colour and performance. Our masterbatch offers superior colour dispersion, excellent colour intensity, and exceptional thermal stability, making it ideal for a range of applications such as packaging, textiles, and automotive parts. AMBER PET MASTERBATCH 66N12521 is formulated to be easy to use and compatible with PET resins, ensuring it integrates seamlessly into your manufacturing process. Additionally, it is free of harmful substances and environmentally friendly. Choose AMBER PET MASTERBATCH 66N12521 for superior colour and performance in your PET-based products, and experience the difference our advanced formula can make. Group: Specialty chemicals, polymers. CAS No. 17772-51-9. Composition: Solvent Yellow 114. Application: Masterbatch & Compounders. Function: POLYMERS, Other, POLYMERS, Polyester - PET. Physical Form: Solid. Product Code: PIM000063925. | Australia |
| AMILITE GCK-12H | Acts as a surfactant and foaming agent. It is 30% aqueous solution derived from glycine (an amino acid) rich in human collagen and coconut fatty acids. It is mild and produces creamy and resilient foam under neutral to alkaline conditions. Leaves a fresh feel on the skin without taut. It contains no waste water and is salt- and solvent-free. Improves foam volume, foam quality, rinsability and imparts nice silky feel to skin. Cold-crystallization process is possible. It is used in body washes and facial wash products. Uses: Skin care (Facial care, Facial cleansing, Body care, Baby care) Toiletries (Shower, Bath, Oral care) Hair care (Shampoos, Conditioners, Styling). Group: Raw Materials; Surfactants. Alternative Name: Potassium Cocoyl Glycinate, Potassium Cocoate, Water. Grade: Cosmetic Ingredients. CAS Number: 301341-58-2, 61789-30-8, 7732-18-5. Pack Sizes: 5 kgs, 10kg, 20kg. | Australia & Worldwide |
| Amino Resins | Surface Coating Resins - ASCC Australian suppliers and distribution of Solvents, Chemicals & Resins. Sizes available including: Bulk, Drums and 1000 litres. | Queensland QLD, New South Wales NSW, Victoria VIC |
| ??Antaron® Eco | ??Antaron® Eco ethylcellulose by Ashland is a film former that is derived from sustainably-sourced, zero-deforestation, wood-derived cellulose made in a water-based manufacturing process that minimizes the use of solvents. It provides excellent water resistance to sun care and color cosmetics products even in 'active' conditions. It also imparts great aesthetics to formulations and works well in wide pH range, in emulsions (both water-in-oil and oil-in-water emulsions), anhydrous gels and sprays. Group: Personal care ingredients, cosmetics & toiletries. CAS No. 9004-57-3. Composition: Cellulose. Application: Skin Care, Color Care, Sun Care. Function: Rheological Modifier, Film Forming. Physical Form: Granule. Recommended Dosage: 0.50% - 1%. Certification: Kosher, Halal. INCI Name: Ethylcellulose. Product Code: PIM000010797. | Australia |
| ANTKOTE 2033 | ANTKOTE 2033 is a hydroxyfunctional polyacrylic dispersion designed for machinery, vehicle, and anticorrosion coating. In combination with polyisocyanates or other crosslinkers, it can be used for two-component coating. It also can be used for one component baking coating with amino resins or blocked polyisocyanates. Approx. 46% in water/solvent naphtha 100/2-butoxy ethanol, approx. 44:4:4. Neutralizing agent, N,N-dimethyl ethanolamine(<2wt%), bound as a salt. Group: Specialty chemicals, paints & coatings. Composition: OH Functional Acrylic. Application: Printing Inks, Architectural and Deco., Can, Coil and Industrial, Automotive Paints. Function: BINDERS, Polyurethan Dispersions. Physical Form: Dispersion. Certification: REACH. Product Code: PIM000007462. | Australia |
| ANTKOTE 2042 | ANTKOTE 2042 is a hydroxyfunctional polyacrylic dispersion designed for vehicle, machinery and anticorrosion coating. In combination with polyisocyanates or other crosslinkers, it can be used for tow-component coating. It also can be used for one component baking coating with amino resins or blocked polyisocyanates. Approx. 46% in water/solvent naphtha 100/1-butoxy-2-propanol, approx. 44:4:4. Neutralizing agent, N,N-dimethyl ethanolamine(<2wt%), bound as a salt. Group: Specialty chemicals, paints & coatings. Composition: OH Functional Acrylic. Application: Printing Inks, Architectural and Deco., Can, Coil and Industrial, Automotive Paints. Function: BINDERS, Polyurethan Dispersions. Physical Form: Dispersion. Certification: REACH. Product Code: PIM000007464. | Australia |
| AOX52 | AOX52 is a highly concentrated, free flowing powder with strong antimicrobial activities. It can be added to different kinds of paints and lacquers (water based, solvent based, solvent free) as well as to thermoplastic materials (PP, PE, TPU, PU, ABS, PA etc.). Group: Specialty chemicals, polymers, paints & coatings. Composition: Powder with strong antimicrobial activities. Application: Can, Coil and Industrial, Masterbatch & Compounders, Medical Application, Powder Coating, Rubber & Elastomers. Function: ADDITIVESBiocides. Physical Form: Micronized Powder. Product Code: PIM000009014. | Australia |
| APO-CAROTENAL (0.65%) 70892 | APO-CAROTENAL (0.65%) 70892 a stable, opaque deep orange, water dispersable emulsified colour for food and beverage colouring. Group: Food & beverage ingredients, beverage & dairy, confectionery & bakery, food supplements & nutrition, processed food & food service. Composition: Solvent:water. Application: Baby Food, Beverage, Biscuit, Bread, Cakes & Pastries, Frozen Dough, Breakfast Cereals/Bars, Confectionery, Dairy, Meat Products. Function: Colour & Colour retention agent. Physical Form: Liquid. Product Code: PIM000069609. | Australia |
| Aquasolve - Degreaser Cleaner | AQUASOLVE is a powerful water-based multi-purpose cleaner designed for a wide range of cleaning applications. It readily emulsifies the toughest soils and grease with the minimum of effort. AQUASOLVE is specially formulated for the removal of dirt and grease from floors, walls and equipment in industrial workshops, automotive detailing and hospitality industries. It is an excellent floor cleaner and can be used for damp mopping of all vinyl, terrazzo, marble and ceramic tile surfaces. Dilute AQUASOLVE in water using the following table as a guide: Engine degreasing 1:5. Car bodies 1:10. Wheels 1:5 Vinyl 1:20. Workshop floors 1:50 . Boat maintenance 1:30. Spray and wipe 1:60. Dilution rates may be varied according to the degree of soiling. . AQUASOLVE may be applied via a spray bottle, foam gun, pressure cleaning and steam cleaning units, or via cloth, sponge, brush, mop or soak method. Pack Sizes: 5 Litre, 20 Litres, 205 Litre Drums. Product ID: SC140. Chemicals By Industry, Marine. | Australia Wide |
| AROMATIC SOLVENT S-150 | AROMATIC SOLVENT S-150 is bright and clear, with an aromatic content of 98 wt% as specified. Group: Specialty chemicals, paints & coatings. CAS No. 64742-94-5. Composition: Aromatic Solvent. Application: Architectural and Deco. Function: SOLVENTSOther. Physical Form: Liquid. Product Code: PIM000067996. | Australia |
| Ascorbic Acid | Ascorbic acid is a naturally occurring organic compound with antioxidant properties. It is a white solid, but impure samples can appear yellowish. It dissolves well in water to give mildly acidic solutions. Ascorbic acid is one form ("vitamer") of vitamin C. This is predominantly used in the food industry due to its preservative affects. Grades: 40-80 mesh and 60-120 mesh. Pack Sizes: MOQ is 1 pallet/1mt - We don't supply in a small quantities. Norkem your first link in the chemical chain. |  Australia |
| A-SENSOFEEL MFC | Minasolve introduces the new Sensofeel product line based on Microfibrillated Cellulose. MFC is manufactured using a patented process that subjects natural cellulose fibers to mechanical shearing. This breaks up the originally linear fibers into a three-dimensional network and increases the surface area per volume by a factor of about 1000. It enables formulators to develop natural cosmetics with a high sensory appeal: - O/W emulsions acquire a rich texture with a velvety touch and reduced oiliness. - Emulsions become whiter/brighter, without the use of pigments such as titanium dioxide. - Make-up formulations with colored pigments obtain a higher coverage. Surfactants yield more stable foam with high volume and creamy texture. A-Sensofeel MFC is a highly concentrated powder form particularly suitable for O/W emulsions and dry powder formulations. It requires a high shear mixing step to activate full performance. Group: Personal care ingredients, cosmetics & toiletries. CAS No. 9004-34-6, 56-81-5 7732-18-5. Composition: Derived Natural. Application: Color Care, Hair Care, Skin Care, Soap & Bath, Spa & Wellness, Sun Care. Function: Rheology Modifier, Stabilizer. Physical Form: Powder. Recommended Dosage: Use Level: 0.2-4%. Certification: China Compliant, Cosmos, Halal, ISO16128, Organic, Vegan. INCI Name: Cellulose, Glycerin, Water. Claim: Smoothing, Organic, Soothing, Natural, Vegan. Product Code: PIM000055040. | Australia |
| Augeo Multi Clean | Augeo Multi Clean - Cleaning agent, Diluent and vehicle for fragrance. eco-friendly solvent can be used in various applications such as air care, fragrances, paints and varnishes, printing inks, household and institutional cleaners, leather and many others. Uses: Cleaning Agents. Group: Raw Materials. Alternative Names: Isopropylidene Glycerol. CAS No. 100-79-8. Pack Sizes: 200kgs. Australian Manufacturer and Supplier of Fragrance Oils, Essential Oils, Aromatic Chemicals. |  |
| AXICOR M341 | AXICOR M341 is the methyl ester of oleic acid, derived from Australian vegetable oil. Group: Specialty chemicals, agrochemicals. CAS No. 112-62-9. Composition: Methyl oleate. Application: Agrochemical Ingredients. Function: SOLVENTSOther. Physical Form: Liquid. Product Code: PIM000009186. | Australia |
| AXICOR M346 | AXICOR M346 is the methyl ester of coconut oil. It is offers excellent solvency properties, and finds use in cleaning and degreasing formulations. Group: Specialty chemicals, electronic & specialties. CAS No. Composition: Fatty acid esters. Application: Others. Function: SOLVENTS, Cleaner / Detergent. Physical Form: Liquid. Product Code: PIM000019700. | Australia |
| AXIMUL DLV50 | AXIMUL DLV50 is a 50% solution of calcium dodecyl benzene sulphonate in 2-ethylhexanol and aromatic solvent. Group: Specialty chemicals, electronic & specialties. CAS No. 26264-06-2, 104-76-7, 64742-94-5. Composition: Anionic emulsifier. Application: Plant & Crop Protection. Function: PIGMENTS, TiO2. Physical Form: Liquid. Product Code: PIM000009203. | Australia |
| Baristas Friend - Coffee Machine Cleaner | BARISTAS FRIEND is a Bio-Enzymatic detergent powder and sanitizer designed for the cleaning of commercial coffee machines. Steps required to Back-flush the machine's delivery groups: Remove the coffee filter from the group handle and replace with a blind filter. For daily cleaning simply add 1 teaspoon into the groups handle and insert as per normal - If your machine is cleaned less often please use 2 teaspoons of product. Commence the brewing cycle and allow to run for 10 seconds to dissolve the cleaner. Stop the cycle and allow machine to sit for a further 20 seconds. Start & Stop the cycle for a further three (3) times, i.e. run for 10 seconds and stop for 20 seconds. Remove the group handle and rinse well with fresh water. Reinsert handle with blind filter, start and stop cycle for 10 times ensuring to run for 6 seconds and stopping for 2 seconds to ensure chemical is completely purged from machine. Install the regular filter and brew and dispose of a single espresso to re-tune the machine. Pack Sizes: 1KG. Product ID: AC123. Chemicals By Industry, Hospitality. | Australia Wide |
| BENZOFLEX 2088 PLASTICIZER | BENZOFLEX 2088 PLASTICIZER is a high solvating plasticiser known for its exceptional performance in PVC, polyvinyl acetate and water-based adhesive systems. It has the application in Flooring, Adhesives/sealants B&C & Vinyl plastisols. It displays excellent wet track, set time and open times and also improve adhesion in acrylic latex caulks. In PVC it serves as a fast fueser, delivering low processing tempertaures and low volatility. Group: Specialty chemicals, paints & coatings. Composition: Benzoate Esters. Application: Adhesives & Sealants, Construction. Function: SOLVENTS, Base Oils & Plasticizers. Physical Form: Liquid. Product Code: PIM000039764. | Australia |
| BENZOFLEX 2-45 PLASTICIZER | BENZOFLEX 2-45 PLASTICIZER is also compatible with, and an excellent solvator for, polyvinyl chloride (PVC). Flexible vinyl formulations based on this plasticizer can be processed quicker and/or at lower temperatures than vinyls based on a di-2-ethylhexyl phthalate. Benzoflex 2-45 is also resistant to extraction from the vinyl by aliphatic and oily solvents. Group: Specialty chemicals, electronic & specialties. Composition: No Hazardous Ingredients. Application: Others. Function: ADDITIVES, Other. Physical Form: Liquid. Product Code: PIM000039774. | Australia |
Our database is helping our users find suppliers everyday.
