Find where to buy products from Australian suppliers, including: distributors, industrial manufacturers, bulk supplies and wholesalers of raw ingredients & finished goods.
Search for products or services, then visit the suppliers website for prices, SDS or more information. You can also view suppliers in NZ, UK or the USA.
| Product | Description | |
|---|---|---|
| Demineralised Water | DEMINERALISED WATER is high purity water. "Demin water" is used for general industrial and laboratory applications having typical TDS <5 mg/L, TOC <1mg/l, and conductivity <0.1 mS/cm at time of production. Supplied in 5L, 20L, 205L and 1000L IBCs. Refills are also available to save users on the costs of packaging and the environment. Pack Sizes: 5 Litre, 20 Litres, 205 Litre Drums, 1000 Litres, 1000 Litres Refi Litre Litre. Product ID: AC305DM. Chemicals By Industry, Universal Products. |  Australia Wide |
| DEMINERALISED WATER | This is water with a low conductivity due to the removal of minerals via the process of reverse osmosis. Uses: Cooling Systems. Product ID: 182. Categories: Cooling Systems. |  Western Australia |
| WATER PURIFIED (demineralised) | 10l Drum PP005-10L 7732-18-5 Chem-Supply |  Nationwide, South Australia (SA) |
| Adclear - N.O.X Reducer | ADCLEAR N.O.X Reducing Agent is a Diesel Exhaust Fluid (DEF) like Adblue that comprises of 32.5% w/w solution of ultra pure Urea in demineralised water. Manufactured in Western Australia to certified ISO 9001: 2015 standard meeting ISO 22241-2 Annex B and ISO 3675. AdClear is designed to be injected into the exhaust systems of vehicles fitted with Selective Catalytic Reduction (SCR) to actively lower N.O.X concentrations in the exhaust gas emissions. Supply directly into your vehicles DEF tank using a clean and dedicated fill lines direct from the product container or bulk tank. If you vehicle runs out of AdClear your vehicle will not stop instead the onboard computer will significantly de-rate the engines power and worsen the fuel economy to reduce engine exhaust gas emissions to below a set limit. AdClear has a shelf life of approximately 12 months when stored in the correct conditions. Store in the supplied air tight containers at room temperature and out of sunlight. Pack Sizes: 5 Litre, 20 Litres, 205 Litre Drums, 205 Litre Drums Refi Litre Litre, 1000 Litres. Product ID: AC22241. Chemicals By Industry, Automotive, Chemicals By Industry, Mining, Chemicals By Industry, Workshop. | Australia Wide |
| Aqua Guard Radiator Inhibitor | AQUA GUARD RADIATOR INHIBITOR is a green coloured corrosion inhibitor concentrate designed to produce an economical corrosion inhibited coolant when added to soft or demineralised water. Use to provide adequate protection for cast iron engines whose fluids dropped and replaced annually. This product meets the requirements of AS2108.1:2004 Type B and when mixed according to directions will provide adequate protection for 12 months or 50,000 km under standard Australian road going conditions. Please note that this product should not be mixed with AS2108.1:2004 Type A coolants and this product has no effect on freezing or boiling point of a cooling system (ie not AF or AB) and for this reason this product is not recommended for freezing conditions or high performance applications. Pack Sizes: 5 Litre, 20 Litres, 1000 Litres, 1000 Litres RTU. Product ID: AC399. Chemicals By Industry, Automotive. | Australia Wide |
| COOL PLUS MAX | COOL PLUS MAX DESCRIPTION. COOL PLUS MAX is a superior water based corrosion inhibitor based on Organic Additive Technology (OAT), which is a selectively balanced mixture of organic additives. OAT formulations are longer life products than those based on conventional formulations, making OATs the products of choice for general aftermarket servicing. 1:20 Mixing ratio. COOLPLUS MAX is a phosphate ,amine, nitirite and silicate-free formulation containing a pH-buffered blend of additives known to reduce the corrosion of steel, cast iron, aluminium alloy, brass, copper and solder .... Contains 400g per litre of ethylene glycol as well as a bittering agent at 10ppm. Available in red or green. USE. Add 50ml of COOL PLUS MAX to every 1L of demineralised water or 1L of Cool Plus Max treats 20L of demineralised water. Dilute product before adding to the cooling system. To avoid possible incompatibility problems, do not mix with any other inhibitors or coolants. SAFETY. COOL PLUS MAX contains ethylene glycol and is poisonous if swallowed. Read Material Safety Data Sheet before use. Avoid contact with the skin and eyes. Keep out of reach of children. COOL PLUS MAX. Exceeds the performance requirements of the following standards. ASTM D1384 Corrosion Test for Engine Coolants in Glassware. ASTM D4340 Corrosion of Cast Aluminium Alloys in Engine Coolants under Heat Rejecting Conditions. Australian/New Zealand Standard 2108.1:2004 "Engine Coolants Type A and Type B for Engine Cooling Systems" using 40 ml per litre hard water. Heat-stressed Alloy Corrosion: ASTM D4340. Heat Transfer Corrosion Rate: 0.3 mg/cm2/week. Max allowable corrosion: 1.0 mg/cm2/week. Crevice/pitting Attack: None. Uses: Cooling Systems. Product ID: 447. Categories: Cooling Systems. | Western Australia |
| Davidsons Plum Powder - Australian Native Extract (Bulk) | Davidson's Plum is a rainforest tree found in Queensland and Northern NSW that bears dark purple fruit with vibrant red flesh. This fruit is high in the anthocyanin group of anti-oxidants and polysaccharides which provide anti-ageing benefits and significant hydration for the skin. The phytochemicals in this extract are freeze dried after harvesting to maintain their efficacy and freshness. Botanical Name: Davidsona pruriens. Common Name: Davidson's Plum. Traditional Name: Ooray (Yirrganydji people of Northern Queensland who speak Djabugay language). Powdered Extract Strength: 10:1. Appearance: this is a dark purple powdered extract that has a high but incomplete solubility in water. This means that it is best to hydrate and filter this before adding it to your cosmetic product. Applications: Use as an active ingredient in skincare products. Particularly well suited for anti-ageing products. Usage Instructions: The powder is 10 times stronger than the fresh fruit so to make a re-constituted fruit juice you would need a mix of 10% powder into 90% demineralised water + preservative (for maintaining the freshness). The powder is highly water soluble but it is always a good idea to filter any extracts before using them in a finished product to remove any solids or un-dissolved powder. Group: Extracts. Alternative Names: Davidsonia Jerseyana Fruit Extract. EINECS: 920-206-2 [ECHA]. CAS No. 1174401-42-3. Pack Sizes: 15G; 100G; 500G; 1KG; 5KG and above upon request. Product ID: EXANDAVIPLUM. If you do make a reconstituted liquid as per above, we recommend using this in your product at anything from 1-50% of your formula.If you want to go ahead and add the powder directly to your formula you could use it at between 0.1-5% but do remember that it required moisture to rehydrate and so will not mix into an oil based product. It can be added dry to powdered clay masks or colour cosmetics if you wish. |  Worldwide |
| Eyewash Preservative Concentrate | EYEWASH PRESERVATIVE CONCENTRATE is an antibacterial concentrate with humectant for preserving and treating portable eyewash water reservoirs for up to 6 months. Use concentrate with either Potable / Mains Water. 250ml of concentrate treats 35 litres of Potable Water - Demineralised Water (Order Code: AC305DM) only. In warmer environments we recommend changing eyewash solutions every 4 months and in colder climates every 6 months. Eyewash preservative concentrate is best used before 3 years of purchase or 12 months from opening. Do not use product if the protective foil seal or tamper evident cap seal is broken upon receipt. For testing active in residual product use the TEST KIT. Pack Sizes: 500M Litre, 5 Litre, Test Strips. Product ID: WC0446. Chemicals By Industry, Laboratory, Chemicals By Industry, Mining. | Australia Wide |
Our database is helping our users find suppliers everyday.
