Find where to buy products from Australian suppliers, including: distributors, industrial manufacturers, bulk supplies and wholesalers of raw ingredients & finished goods.
Search for products or services, then visit the suppliers website for prices, SDS or more information. You can also view suppliers in NZ, UK or the USA.
| Product | Description | |
|---|---|---|
| Diesel | Ground Fuels - ASCC Australian suppliers and distribution of Solvents, Chemicals & Resins. Sizes available including: Bulk, Drums and 1000 litres. Categories: Bulk Fuels. |  Queensland QLD, New South Wales NSW, Victoria VIC |
| Diesel AntiGel | Diesel AntiGel: COLD FLOW IMPROVER This advanced technology product lowers the gel point of diesel fuel and allows it to remain liquid at very low temperatures. It is suitable for use in summer or winter grade diesels. Categories: Industrial, Mechanical, Agricultural, Diesel Anti Gel Additives, Fuel Cleaning |  Western Australia |
| DIESEL INJECTOR CLEANER | PowerUp Diesel Injector Cleaner consists of a high strength blend of solvents, surface active agents and sludge dispersants for engine top-end cleaning and decarbonising by addition to the fuel tank helps cleans injectors, valves & combustion chambers restores power loss from fouled injectors & allows smoother engine running. reduces exhaust smoke. improves engine efficiency & fuel economy. helps to remove water from fuel and fuel lines. reduces the formation of wax and gum deposits. allows fuel to burn cleanly and efficiently. helps neutralize harmful acids. Uses: Fuel & Oil Treatments. Product ID: 80. Categories: Fuel & Oil Treatments. | Western Australia |
| DIESEL PARTICULATE FILTER CLEANER (DPF) | DIESEL PARTICULATE FILTER CLEANER DESCRIPTION: Diesel particulate filters are deigned to remove 85-100% of the soot particles created by incomplete combustion of the fuel/air mix in diesel engines. These particles accumulate in the DPF filter and this filter will need to be cleaned and regenerated from time to time to prevent the vehicle going in to limp mode. By using PowerUps DPF Cleaner which is a combustion catalyst, it will induce passive regeneration of the filter by enhancing the combustion process, increasing the temperature of the exhaust gasses and lowering the soot burn out temperature. This improved regeneration process reduces the need to remove the filter for cleaning because of high soot content. Also by improving the combustion process PowerUps DPF Cleaner ensures a more complete burn there for reducing the amount of diesel particle matter that will end up in the particulate filter. USE. By adding 300ml of PowerUps DPF Cleaner to approximately 30L of diesel fuel it will help burn off any built up soot, reducing back pressure of the filter and help remove any warning lights. As ongoing maintenance DPF Cleaner should be added at 300ml to approximately 60L of diesel fuel to prevent any buildup of soot in the filter. . Other Benefits. *Increase power. Improves throttle response and engine performance. Improves low temperature starting. Increase lubrication of the fuel. Cleans injectors and fuel lines. Can be used in diesel and all recognised bio-Diesels. Uses: Fuel & Oil Treatments. Product ID: 480. Categories: Fuel & Oil Treatments. | Western Australia |
| DIESEL TEC AND PETROL TEC | Top End Cleaner. Combustion engines must meet increasingly stringent environmental requirements and yet are supposed to emit less and less harmful exhaust gases, such as for example nitrogen oxides (NOx). For this reason, car manufacturers are continuously devising new advanced solutions. One of the solutions is to reduce the emission of harmful gasses using Exhaust Gas Recirculation (EGR). With exhaust gas recirculation part of the exhaust gasses are captured and redirected to the combustion chambers in the engine. The dirty exhaust gasses are mixed in the engine with fresh intake air. As a result of mixing, the quantity of oxygen in the intake air decreases and the combustion chamber is filled with gas, which does not undergo a chemical reaction. As a result of this the heat generated during combustion has to be dissipated over a greater mass and consequently the combustion temperature drops. NOx occurs in particular at high combustion temperatures. Because the combustion temperature drops through the application of EGR, the quantity of NOx also drops. More soot as result of less nitrogen. Chemical reactions are continuously taking place due to the combustion process. If the quantity of nitrogen oxides decreases, this chemical reaction causes soot. For diesel engines the quantity of soot is higher than in the case of petrol engines. The soot adheres to the components such as the articulating EGR valve, which determines how much soot re-enters the engine, the intake manifold and the valve seats, pistons and piston rings on the intake valves. Eventually the EGR valve will seize up, and the closing action of the valves will deteriorate... | Western Australia |
| AFAB 50 - HD Coolant Diesel & Petrol | AFAB 50 is a green coloured, premium performance, low silicate, ethylene glycol based coolant, antifreeze and corrosion inhibitor for use in all automotive cooling systems such as those in passenger cars, trucks, busses and equipment. Use as received in clean and good condition cooling systems. Flush system as per manufactures instructions first. Pack Sizes: 5 Litre, 20 Litres. Product ID: AC398. Chemicals By Industry, Automotive, Chemicals By Industry, Marine, Chemicals By Industry, Mining, Chemicals By Industry, Workshop. |  Australia Wide |
| PU OIL Protech Diesel oil SAE30 | PU OIL Protech Diesel oil SAE30. Uses: Performance Oils. Product ID: 298. Categories: Performance Oils. | Western Australia |
| PU OIL Protech Diesel oil SAE40 | PU OIL Protech Diesel oil SAE40. Uses: Performance Oils. Product ID: 299. Categories: Performance Oils. | Western Australia |
| PU OIL Protech Diesel oil SAE50 | PU OIL Protech Diesel oil SAE50. Uses: Performance Oils. Product ID: 300. Categories: Performance Oils. | Western Australia |
| Adclear - N.O.X Reducer | ADCLEAR N.O.X Reducing Agent is a Diesel Exhaust Fluid (DEF) like Adblue that comprises of 32.5% w/w solution of ultra pure Urea in demineralised water. Manufactured in Western Australia to certified ISO 9001: 2015 standard meeting ISO 22241-2 Annex B and ISO 3675. AdClear is designed to be injected into the exhaust systems of vehicles fitted with Selective Catalytic Reduction (SCR) to actively lower N.O.X concentrations in the exhaust gas emissions. Supply directly into your vehicles DEF tank using a clean and dedicated fill lines direct from the product container or bulk tank. If you vehicle runs out of AdClear your vehicle will not stop instead the onboard computer will significantly de-rate the engines power and worsen the fuel economy to reduce engine exhaust gas emissions to below a set limit. AdClear has a shelf life of approximately 12 months when stored in the correct conditions. Store in the supplied air tight containers at room temperature and out of sunlight. Pack Sizes: 5 Litre, 20 Litres, 205 Litre Drums, 205 Litre Drums Refi Litre Litre, 1000 Litres. Product ID: AC22241. Chemicals By Industry, Automotive, Chemicals By Industry, Mining, Chemicals By Industry, Workshop. | Australia Wide |
| AFAB 30 - Coolant Concentrate | AFAB 30 - COOLANT - Diesel Premix Coolant is a Green coloured ready-to-use anti-freeze anti-boil coolant that contains minimum of 30% ethylene glycol and incorporates virtually non-depleting organic acid corrosion inhibitors (organic additive technology - OAT). This product is silicate free and recommended as coolant for use in ferrous and aluminium alloy petrol powered automotive engines, heavy duty diesel and natural gas, mobile and stationary engines. AFAB 30 COOLANT is compatible with aluminium, copper and brass cooling systems. With the combination of organic carboxylate inhibitors this gives excellent protection against cast iron cylinder liner and block pitting, cavitation, corrosion or electrical erosion. AFAB 30 - COOLANT does not require a top-up charge of Supplemental Coolant Additive (SCA) when filling and is not expected until 72,000 hours of use when used as directed. For heavy duty diesel engine services AFAB 30 - COOLANT can be used, in light duty commercial vehicles for 3 years or 120,000kms, and heavy-duty engines for 600,000kms, 72000hrs or 3.5 years, whichever comes first. Pack Sizes: 20 Litres, 200 Litre, 1000 Litres. Product ID: AC397-30. Chemicals By Industry, Automotive, Chemicals By Industry, Workshop. | Australia Wide |
| AFAB - Coolant Concentrate | AFAB COOLANT CONCENTRATE is a universal hybrid organic acid & ethylene glycol-based coolant, designed for use as an antifreeze and anti-boil coolant concentrate (contains 1045 g/litre 93% ethylene glycol) which is used in radiators. This product incorporates an advanced formula technology with virtually non-depleting organic acid technology (OAT) corrosion inhibitors. AFAB COOLANT CONCENTRATE is compatible with aluminium, copper and brass cooling systems. With the combination of organic carboxylate inhibitors gives an excellent protection against cast iron cylinder liner and block pitting and cavitation, corrosion/erosion. It is silicate free and recommended as coolant for use in ferrous and aluminium alloy petrol powered automotive engines, light and heavy-duty diesel, natural gas, mobile and stationary engines. Recommended for light duty commercial vehicles for 5 years or 200,000Kms at 33% v/v, and heavy-duty engines for 1,000,000Kms, 12000hrs or 6 years at 50% v/v, whichever comes first when good quality water is used. Pack Sizes: 5 Litre, 20 Litres, 205 Litre Drums. Product ID: AC397. Chemicals By Industry, Automotive. | Australia Wide |
| AFAB - Long Life Red Coolant | AFAB LONG LIFE RED COOLANT CONCENTRATE is an extended life ethylene glycol based anti-freeze, anti-boil (AFAB) coolant concentrate with inorganic corrosion inhibitors (OAT). Light duty commercial vehicles for 5 Years or 200,000 at 33% v/v and heavy duty engines for 1,000,0000kms or 6 years at 50% v/v, whichever comes first. It is amine & silicate free and recommended for use in ferrous and aluminium alloy petrol, natural gas, heavy duty US, European and Japanese Diesel mobile and stationary engines. This product should be used as received but can be diluted as per technical advice only. Special additives have been included to provide protection from cylinder pitting from corrosion. Light duty commercial vehicles for 5 Years or 200,000 at 33% v/v and heavy duty engines for 1,000,0000kms or 6 years at 50% v/v, whichever comes first. Always dilute with distilled water according to engine manufacturers recommendations. OEM Service intervals should be maintained under warranty periods and topping up the cooling system should be done with AFAB LONG LIFE RED COOLANT. Meets or is suitable for the following: AS 2108.1:2004 Type A. ASTM D3306, D4656, D4985, D5345, D6210. SAE J1034. CATERPILLAR EC-1. CUMMINS 90 T8 4. DETROIT DIESEL. Ford WSS-M97B44-C. GM 1899M, 6277M. JASO M325 LLC. JIS K2234. Komatsu. Mack RVI. MAN 324. MB 325.3. Mitsubishi ES-X64216. MTU. Perkins. Renault. D & P Scania TI 02-98. Volvo Heavy Truck. Pack Sizes: 20 Litres, 205 Litre Drums, 1000 Litres. Product ID: AC394. Chemicals By Industry, Automotive, Chemicals By Industry, Marine, Chemicals By Industry, Mining, Chemicals By Industry, Workshop. | Australia Wide |
| Blue Power | Blue Power: High quality Urea solution developed for the automotive SCR catalytic converter for the reduction of emissions in Euro 4 and Euro 5 commercial diesel vehicles. Reduces nitrogen oxide (Nox) into harmless nitrogen and water, increasing power and torque. Categories: Mining, Industrial, Mechanical, Agricultural | Western Australia |
| Blue Power | This is a high quality Urea solution especially developed for the automotive SCR catalytic converter and used for the reduction of emissions in Euro 4 and Euro 5 commercial diesel vehicles. By injecting Blue Power directly into the exhaust system to combine with exhaust gasses in the catalytic converter all harmful nitrogen oxides (NOx) are immediately reduced into harmless nitrogen and water. This results in increased power and torque along with an extended service lifetime for vehicles. Uses: Fuel & Oil Treatments. Product ID: 169. Categories: Fuel & Oil Treatments. | Western Australia |
| DTANE +8 | Cetane Booster. Your engine is only as good as the fuel you feed it. Cetane, which is also sometimes referred to as hexadecane or isocetane, is a colorless gas with the chemical formula C16H34. PowerUp Dtane +8 will improve the Cetane level in the diesel fuel up to 8 points depending on the quality of the fuel. How can a higher Cetane number be achieved?. There are two ways to gain a higher Cetane number. The first is to do it during the refining process. A low density fuel contains fewer BTUs and consequently provides less power to a diesel engine. Another way to gain a higher Cetane number . A higher Cetane number can also be derived through the addition of PowerUp Dtane +8 Cetane improver chemistry. When PowerUp Dtane +8 improver is added to a low Cetane diesel fuel, the result is a higher-Cetane-number fuel with more power and fuel efficiency. Dtane +8 is not only a Cetane improver but also a full fuel system maintenance additive that has many other benefits. Along with being able to absorb small amounts of water in the fuel system it will also increase the lubrication of the fuel up to 20%. Dtane Benefits. Quicker starting. Quieter operation with less diesel chatter. Improved fuel efficiency. A reduction of harmful emissions. Less wear and tear on the starter and batteries. Full system Cleaner. Improves lubrication and corrosion protection, reducing engine wear. Improves throttle response and engine performance. Improves low temperature starting. Safe with DPF filters. Suitable for common rail and direct injection diesel systems. Compatible with recognised biodiesels. Removes moisture from fuel. Use. Add 250- 300ml of PowerUp Dtane + 8 to 60 - 80L of diesel fuel. Add to fuel tank before filling with diesel to ensure proper mixing. Safety. Keep out of Reach of Children. Uses: Fuel & Oil Treatments. Product ID: 482. Categories: Fuel & Oil Treatments. | Western Australia |
| DynaFuel | DynaFuel: ALL FUEL TREATMENT REDUCES FUEL CONSUMPTION UP TO 10% Helps absorb and remove water from fuel and lines, neutralize acids, remove deposits and retard fungal growth. Suitable for petrol, diesel, small engines. Super concentrated and economical. Categories: Mining, Industrial, Mechanical, Agricultural, Marine, FUEL TREATMENTS & CLEANERS | Western Australia |
| Engine Flush | Engine Flush is specially formulated to flush and clean all mechanical components. It is equally effective in petrol and diesel engines, transmissions, differentials and final drives. Engine Flush effectively cleans and frees piston rings, valves and hydraulic lifters. When used according to instructions it provides substantial lubrication to all parts. It's formulated solvents clean and remove gums, varnishes and sludge deposits from internal parts while neutralising harmful acids. Uses: Mechanical Flush. Group: Workshop Supplies. Pack Sizes: 20L. |  |
| Engine Flush | Engine Flush: Removes harmful sludge from all petrol and diesel engines. Categories: Industrial, Mechanical, Agricultural, Marine | Western Australia |
| grotamar® 71 | grotamar® 71 is a preservative for diesel fuels. Fuel biocide against bacteria, yeasts and moulds (incu. sulphate - reducing bacteria). It is good anti corrosive properties and enhances lasting protection against microbial degradation. in complaince with BPR and FIFRA. Good solubilty in diesel fuel and water. Free of sulphur. Group: Specialty chemicals, electronic & specialties. Composition: Reaction products of paraformaldehyde and 2-hydroxypropylamine (ratio 3:2); [MBO]. Application: Petrochemicals. Function: Biocides. Physical Form: Liquid. Product Code: PIM000008842. |  Australia |
| grotamar® 82 | grotamar® 82 is a preservative for diesel fuel and heating oil. Group: Specialty chemicals, electronic & specialties. CAS No. 66204-44-2. Composition: Reaction products of paraformaldehyde and 2- hydroxypropylamine (ratio 3:2); [MBO]. Application: Petrochemicals. Function: Biocides. Physical Form: Liquid. Product Code: PIM000008846. | Australia |
| Injector Cleaner | Injector Cleaner: Suitable for both diesel or petrol systems. Cleans and maintains injectors, carburettor components and frees sticky parts, jets & fuel lines. Categories: Industrial, Mechanical, Agricultural, Marine, Fuel Injector Cleaners | Western Australia |
| PROFLUSH | Pro Flush is a specially formulated blend of penetrants, lubricants and sludge dispersants designed for use in all petrol and diesel engines. It provides the following benefits: Cleans all engine parts. Removes harmful sludge and other contaminants. Cleans valves and hydraulic valve lifters. Frees piston rings. Reduces fuel consumption. Contains no harmful aromatic hydrocarbons. Fortified with Extreme Pressure additives to ensure engine protection. Uses: Fuel & Oil Treatments. Product ID: 203. Categories: Fuel & Oil Treatments. | Western Australia |
| PU OIL Syntech 15W40 CK4 Low SAPS OEM | SYNTECH 15W40 CK4/SN. SEMI SYNTHETIC OIL MADE FROM HYDROCRACKED BASE STOCKS. Features and Benefits. Syntech 15W40 CK4/SN is a Low SAPS, new generation, premium heavy duty diesel oil that has been. formulated specifically to meet the latest Euro VI requirements of Australian and imported designed low. emission engines. Designed and formulated to provide exceptional protection for highly rated diesel engines. running in severe service conditions. It affords increased fuel economy, long drain intervals and prolonged. engine life. OEM approved - Cummins, Detroit Diesel, Volvo, Mack, Renault. Specially formulated to protect after exhaust systems. Excellent soot dispersancy. Superior friction and wear control. Longer drain intervals. Approvals / Recommendations. 15W40 CK4/SN meets or exceeds the following specifications. API CK-4/CJ-4/CI-4+/CI-4. MAN 3275 & 3575. ACEA E7-12, E9-12. DQC III-10-LA. CATERPILLAR ECF-3. MTU 2.1. MB 228.31. FORD WSS-M2C171-E. FORD WSS-M2C171-F1. MACK EO-O PREMIUM PLUS. Volvo VDS-4- Approval Yes. Mack EO-S 4.5- Approval Yes. Renault VI RLD-3- Approval Yes. Cummins CES 20086- Approval Yes. Detroit Diesel DDC93k222- Approval Yes. Applications. Recommended for high speed, turbocharged diesel and petrol engines, in particular all emission design engines. Specially formulated to protect exhaust after treatment devices such as diesel particulate filters (DPFs). Uses: Performance Oils. Product ID: 375. Categories: Performance Oils. | Western Australia |
| PU OIL Syntech 15W40 oil CI4 | SYNTCH OIL 15W40 API CI4/SN. SEMI SYNTHETIC OIL MADE FROM HYDROCRACKED BASE STOCKS. SYNTECH 15W40 API SN/CI-4 is a premium quality engine oil for turbocharged diesel engines running. under severe conditions with extended drain intervals according to the manufacturers. recommendation. It is designed for highly rated diesel engines meeting Euro I, II, III, IV and Euro. V emission requirements. This oil provides effective control with respect to piston cleanliness and. bore polishing. It further provides excellent wear control, soot handling and lubricant stability. Approvals / Recommendations. SYNTECH 15W40 API SN/CI-4 meets or exceeds the following Industry Specifications. API CI-4/SL-licensed (SAE 15W-40). MB 228.83 (SAE 15W-40). Volvo VDS-3 (SAE 15W-40). Cummins CES 20078 (SAE 15W-40). MAN M3275 (SAE 15W-40). Mack EO-N (SAE 15W-40). MTU Category 2 (SAE 15W-40). Renault RLD-2 (SAE 15W-40). Deutz DQC III-10 (SAE 15W-40). JSC KAMAZ (SAE 15W-40). JSC Avtodiesel (YaMZ) 15W40. JSC TMZ (Tutaev) 15W-40. API CI-4/SL. ACEA E7-08, A3/B4-04. Cummins CES 20071/2/6/7 (SAE 15W-40). Mack E-OM Plus (SAE 15W-40). Global DHD-1(SAE 15W-40). DCAT ECF-1-a / ECF-2 (15W-40). Deutz DQC III-05 (SAE 15W-40). Uses: Performance Oils. Product ID: 373. Categories: Performance Oils. | Western Australia |
| PU OIL Syntech 15W40 oil CJ4- Low SAPS | SYNTECH 15W40 CJ4/SN. SEMI SYNTHETIC OIL MADE FROM HYDROCRACKED BASE STOCKS. Features and Benefits. Syntech 15W40 CJ4/SN is a heavy duty Low SAPS. premium diesel lubricant incorporating the most. advanced development in lubrication chemistry and. high viscosity index premium base oils resulting in a. high performance diesel engine oil. Syntech 15W40 CJ4/SN has been formulated. specifically to meet the requirements of Australian. and imported designed low emission engines. including those engines which incorporate exhaust. gas recycling (EGR) to provide fuel efficiency, high. wear protection and long drain capability. EGR can. add to deposits forming in the combustion chamber. and therefore the low sulphated ash content assists in. maintaining engine cleanliness. Approvals / Recommendations. 15W40 CJ4/SN meets or exceeds the following. specifications. API CJ-4, CI-4 PLUS, CH-4, CF API, SN, SL, SJ . ACEA E9. ACEA E7. Mack EO-O Premium Plus. John Deere -PierIV. Caterpillar ECF-3. Cummins CES 20081. JASO DH-2. MAN 3275 & 3575. Volvo VDS-4, VDS-3 extended drain. MB 228.31. MTU Type 2.1. Renault Truck RLD-3. Deitz DQC III-05. Detroit Diesel DDC 93K218. Applications. Recommended for high speed, turbocharged. diesel and petrol engines, in particular all. emission design engines. Specially formulated to protect exhaust after. treatment devices such as diesel particulate. filters (DPFs). Uses: Performance Oils. Product ID: 374. Categories: Performance Oils. | Western Australia |
| PU OIL Syntech 15W40 SN/CF4 | Syntech 15W40 SN/CF. SEMI SYNTHETIC MADE FROM HYDROCRAKED BASE STOCKS. SYNTECH 15W40 SN/CF is a multi grade engine oil that provides superior engine protection suitable for. todays multi-valve and conventional engines. Incorporating the latest additive technology, designed for todays. conditions, It provides optimum protection against sludge formation, higher temperatures and helps keep the. engine clean and free of deposits under high speed high stress motoring conditions. SYNTECH 15W40 SN provides good wear protection at low temperatures combining easy low temperature. engine startup and fast oil circulation at cold start up when the engine is at its most critical. Applications. SYNTECH 15W40 SN/CF is formulated for all types of passenger, 4WD, and light commercial vehicle engines. covering Petrol, Diesel and LPG naturally aspirated or turbo charged. SYNTECH 15W40 SN/CF meets or exceeds the requirements of an SN/CF engine oil. It has an highly effective. detergent and dispersant system to keep engine internals clean. It provides a high level of protection against wear and assists in energy conservation and fuel economy. Approvals / Recommendations. SYNTECH 15W40 SN/CF meets or exceeds the following specifications. API SN/CF. FORD ESE-M2C153E. ACEA A3/B4. VW 502.00/505.00. Legacy Service Fill. Ford Service Fill. Chrysler Service Fill. Typical Data. Typical Data Unit Results. Specific Gravity @ 15°C 0.878. Viscosity @ 40°C mm2/s (cSt) 103. Viscosity @ 100°C mm2/s (cSt) 14.5. Viscosity Index 14.5. Minor variations in product typical test data are to be expected in normal manufacturing. Uses: Performance Oils. Product ID: 372. Categories: Performance Oils. | Western Australia |
| PU OIL Syntech FS 5W30 Full syn- Low Ash SN/CF | SYNTECH FS 5W30. SYNTECH 5W30 is a full synthetic petrol/diesel motor oil formulated with advanced synthetic base stocks and a. premium additive. It has a broad viscosity range providing the highest level of protection in the most demanding. of conditions and allowing for maximum drain intervals. SYNTECH 5W30 is a low pour point motor oil ensuring. quick lubrication to all moving parts during cold weather starts. It also provides protection against wear and. corrosion, prevents oxidative thickening and inhibits promotion of engine acids, sludge and varnish deposits. Features and Benefits. SYNTECH 5W30 meets or exceeds the requirements of an SN/CF engine oil and is suitable for unleaded or. leaded fuelled engines, diesel powered cars, turbo charged and naturally aspirated engines and LPG engines. Specifications. API SN / CF / CF-2. ACEA A3/B4, A3/B3, A5/B5. BMW LL-O/M54. DAIMLER CHRYSLER MS 6395K. GM dexos 1. MB 229.1, 229.5. Typical Data. CHARACTERISTICS 5W30 SN/CF. Specific Gravity @ 15°C 0.854. Kinematic Viscosity @ 40°C, mm2/s (cSt) 67. Kinematic Viscosity @ 100°C, mm2/s (cSt) 11.2. Viscosity Index 161. MIL-L-2104B. MIL-L-46152. LAND ROVER. PSA B 71 2300. RENAULT 0700. VW 50200, 50300, 50500, 50600. Uses: Performance Oils. Product ID: 359. Categories: Performance Oils. | Western Australia |
| PU OIL Syntech FS C3 0W30 Full syn- Low Ash SN/CF | Syntech FS C3 0W30. FULLY SYNTHETIC, LOW SAPS, ULTRA HIGH PERFORMANCE LONG DRAIN. SYNTECH FS C3 0W30 is designed for European engines requiring SHPD (Super High Performance Diesel). level of performance and those which comply with Euro 1, Euro 2, Euro 3 and Euro 4 exhaust emission. legislation. SYNTECH FS C3 0W30 is a full synthetic PAO based formulation and is suitable for use where. particulate filters are used. SYNTECH FS C3 0W30 offers long drain intervals, sustains maximum performance. even under high stress and delivers unsurpassed levels of protection. Features and Benefits. SYNTECH FS C3 0W30 has outstanding low temperature viscometrics for reduced wear at start up and is a. dedicated European formulation with Low/ Mid SAPS (Sulfated Ash, Phosphorus and Sulfur). SYNTECH FS C3 0W30 has superior soot and sludge control resulting in cleaner engines and reduces fuel. consumption due to superior technology. Approvals and Recommendations. SYNTECH FS C3 0W30 meets or exceeds the following specifications. ACEA A3/B3-08, A3/B4-04. ACEA A1/B1-10, A5/B5-10. ACEA C2, C3. API SN/CF. VW 502 00/505 00/505 01. Uses: Performance Oils. Product ID: 361. Categories: Performance Oils. | Western Australia |
| PU OIL Syntech FS C4 5W30 Full Syn- Low Saps | Syntech FS C4 5W30 LONG DRAIN. FULLY SYNTHETIC, LOW SAPS, ULTRA HIGH PERFORMANCE OIL. SYNERGY EURO Low SAPS 5W30 C4 is the most advanced development in lubrication chemistry and. complies with the demanding requirements of Euro IV and Euro V exhaust emission legislation. Ideally designed. for European engines (especially for late model Renault diesel passenger cars) requiring SHPD (Super High. Performance Diesel) level of performance and those which comply with Euro IV and Euro V exhaust emission. legislation. SYNTECH FS LOW SAPS 5W30 C4 is a full synthetic formulation and is suitable for use where diesel particulate. filters (DPF) are used. Low SAPS 5W30 C4 has excellent soot and sludge control resulting in cleaner engines. and reduces fuel consumption due to superior technology. has outstanding low temperature viscometrics for. reduced wear at start up and is a dedicated European formulation with Low SAPS (Sulfated Ash, Phosphorus. and Sulfur). Uses: Performance Oils. Product ID: 366. Categories: Performance Oils. | Western Australia |
| PU OIL Syntech PAO 5W30 Full Syn VW 504,507 | SYNTECH FS 5W30 VW 504-507. FULLY SYNTHETIC, LOW SAPS, ULTRA HIGH PERFORMANCE OIL. SYNTECH FS 5W30 VW 504 is a new Low SAPS generation oil especially developed for Volkswagen Group. engines. It is designed to be used in all Diesel and Petrol engines, especially those respecting the Euro 4. standards for the reduction of polluting omissions. SYNTECH FS 5W30 VW 504-507 is ideally designed for European engines requiring SHPD level of performance. and those which comply with Euro 1, Euro 2, Euro 3 and Euro 4 exhaust emission legislation. Features and Benefits. VW 504/507 has been developed with Clean performance technology reducing long term blocking of the. particulate filters thereby prolonging its life span and maintaining engine performance. VW 504/507 guarantees a rapid build-up of a stable oil film at cold start, that remains stable at high operating. temperatures, while friction is reduced in order to provide greater fuel economy. VW 504/507 incorporates the highest level of anti wear, anti corrosion and anti foam properties available and. allows extra long drain intervals (30,000 - 50,000 kms), thanks to an exceptional oxidation resistance. VW 504/507 ensures a greater respect for the environment through its reduced omissions. Approvals / Recommendations. SYNTECH FS 5W30 VW 504-507 meets or exceeds the following Industry Specifications. ACEA A3/B4-04 (2004) ACEA C3. Volkswagen VW 504.00. Volkswagen VW 507.00. BMW Longlife 04. MB 229. 31, 229.51. Uses: Performance Oils. Product ID: 364. Categories: Performance Oils. | Western Australia |
Our database is helping our users find suppliers everyday.
