Find where to buy products from Australian suppliers, including: distributors, industrial manufacturers, bulk supplies and wholesalers of raw ingredients & finished goods.
Search for products or services, then visit the suppliers website for prices, SDS or more information. You can also view suppliers in NZ, UK or the USA.
| Product | Description | |
|---|---|---|
| 3M W-210 CERAMIC MICROSPHERES | 3M W-210. CERAMIC MICROSPHERES are made of alkali alumino silicate ceramic and is one of our smallest high-strength ceramic particles with a typical d90 of 12 microns; it has a controlled particle size distribution. Formulating with these ceramic microspheres allows higher filler loadings while maintaining desired properties such as viscosity control. In addition, these engineered particles are added to many paints and industrial coatings to provide scrub and burnish resistance. Due to their smaller particle size, ceramic microspheres white grade W-210 are typically chosen over other ceramic microspheres for higher gloss formulations. Formulators may be able to extend resin in their formulation by adding 3M ceramic microspheres and potentially reduce cost. Group: Specialty chemicals, paints & coatings. Composition: Alkali Alumino Silicate Ceramic. Application: Architectural and Deco., Can, Coil and Industrial. Physical Form: Nano powder. Product Code: PIM000031764. |  Australia |
| ABSOLUTE - Alkaline water based degreaser, biodegradable. | Heavy Duty Industrial Cleaners. pH of about 9.5 so it can damage old paint or weaker fabrics. Boosted with Butyl Icinol. Because it is water based and built on totally biodegradable surfactants it meets the Australian standard for Biodegradability. USED IN: Degreasing engine bays, Cleaning of soot & carbon from most fibreglass and painted surfaces, Chassis Cleaner, Emulsifying grease and oil prior to discharge, Removal of fat & grease from kitchens, Dissolving body fat build up in bathrooms, Emulsifying grease and fat in ducts and piping systems. Distributors of WHOLESALE CHEMICALS & CLEANING PRODUCTS to the Far North Queensland region including the Atherton Tablelands the Cape & Thursday Island. Categories: Degreasing, Industrial and Commercial Cleaning |  Cairns, Queensland QLD |
| AFAB 30 - Coolant Concentrate | AFAB 30 - COOLANT - Diesel Premix Coolant is a Green coloured ready-to-use anti-freeze anti-boil coolant that contains minimum of 30% ethylene glycol and incorporates virtually non-depleting organic acid corrosion inhibitors (organic additive technology - OAT). This product is silicate free and recommended as coolant for use in ferrous and aluminium alloy petrol powered automotive engines, heavy duty diesel and natural gas, mobile and stationary engines. AFAB 30 COOLANT is compatible with aluminium, copper and brass cooling systems. With the combination of organic carboxylate inhibitors this gives excellent protection against cast iron cylinder liner and block pitting, cavitation, corrosion or electrical erosion. AFAB 30 - COOLANT does not require a top-up charge of Supplemental Coolant Additive (SCA) when filling and is not expected until 72,000 hours of use when used as directed. For heavy duty diesel engine services AFAB 30 - COOLANT can be used, in light duty commercial vehicles for 3 years or 120,000kms, and heavy-duty engines for 600,000kms, 72000hrs or 3.5 years, whichever comes first. Pack Sizes: 20 Litres, 200 Litre, 1000 Litres. Product ID: AC397-30. Chemicals By Industry, Automotive, Chemicals By Industry, Workshop. |  Australia Wide |
| AFAB - Coolant Concentrate | AFAB COOLANT CONCENTRATE is a universal hybrid organic acid & ethylene glycol-based coolant, designed for use as an antifreeze and anti-boil coolant concentrate (contains 1045 g/litre 93% ethylene glycol) which is used in radiators. This product incorporates an advanced formula technology with virtually non-depleting organic acid technology (OAT) corrosion inhibitors. AFAB COOLANT CONCENTRATE is compatible with aluminium, copper and brass cooling systems. With the combination of organic carboxylate inhibitors gives an excellent protection against cast iron cylinder liner and block pitting and cavitation, corrosion/erosion. It is silicate free and recommended as coolant for use in ferrous and aluminium alloy petrol powered automotive engines, light and heavy-duty diesel, natural gas, mobile and stationary engines. Recommended for light duty commercial vehicles for 5 years or 200,000Kms at 33% v/v, and heavy-duty engines for 1,000,000Kms, 12000hrs or 6 years at 50% v/v, whichever comes first when good quality water is used. Pack Sizes: 5 Litre, 20 Litres, 205 Litre Drums. Product ID: AC397. Chemicals By Industry, Automotive. | Australia Wide |
| AFAB - Long Life Red Coolant | AFAB LONG LIFE RED COOLANT CONCENTRATE is an extended life ethylene glycol based anti-freeze, anti-boil (AFAB) coolant concentrate with inorganic corrosion inhibitors (OAT). Light duty commercial vehicles for 5 Years or 200,000 at 33% v/v and heavy duty engines for 1,000,0000kms or 6 years at 50% v/v, whichever comes first. It is amine & silicate free and recommended for use in ferrous and aluminium alloy petrol, natural gas, heavy duty US, European and Japanese Diesel mobile and stationary engines. This product should be used as received but can be diluted as per technical advice only. Special additives have been included to provide protection from cylinder pitting from corrosion. Light duty commercial vehicles for 5 Years or 200,000 at 33% v/v and heavy duty engines for 1,000,0000kms or 6 years at 50% v/v, whichever comes first. Always dilute with distilled water according to engine manufacturers recommendations. OEM Service intervals should be maintained under warranty periods and topping up the cooling system should be done with AFAB LONG LIFE RED COOLANT. Meets or is suitable for the following: AS 2108.1:2004 Type A. ASTM D3306, D4656, D4985, D5345, D6210. SAE J1034. CATERPILLAR EC-1. CUMMINS 90 T8 4. DETROIT DIESEL. Ford WSS-M97B44-C. GM 1899M, 6277M. JASO M325 LLC. JIS K2234. Komatsu. Mack RVI. MAN 324. MB 325.3. Mitsubishi ES-X64216. MTU. Perkins. Renault. D & P Scania TI 02-98. Volvo Heavy Truck. Pack Sizes: 20 Litres, 205 Litre Drums, 1000 Litres. Product ID: AC394. Chemicals By Industry, Automotive, Chemicals By Industry, Marine, Chemicals By Industry, Mining, Chemicals By Industry, Workshop. | Australia Wide |
| Aqua Guard Radiator Inhibitor | AQUA GUARD RADIATOR INHIBITOR is a green coloured corrosion inhibitor concentrate designed to produce an economical corrosion inhibited coolant when added to soft or demineralised water. Use to provide adequate protection for cast iron engines whose fluids dropped and replaced annually. This product meets the requirements of AS2108.1:2004 Type B and when mixed according to directions will provide adequate protection for 12 months or 50,000 km under standard Australian road going conditions. Please note that this product should not be mixed with AS2108.1:2004 Type A coolants and this product has no effect on freezing or boiling point of a cooling system (ie not AF or AB) and for this reason this product is not recommended for freezing conditions or high performance applications. Pack Sizes: 5 Litre, 20 Litres, 1000 Litres, 1000 Litres RTU. Product ID: AC399. Chemicals By Industry, Automotive. | Australia Wide |
| Aquasolve - Degreaser Cleaner | AQUASOLVE is a powerful water-based multi-purpose cleaner designed for a wide range of cleaning applications. It readily emulsifies the toughest soils and grease with the minimum of effort. AQUASOLVE is specially formulated for the removal of dirt and grease from floors, walls and equipment in industrial workshops, automotive detailing and hospitality industries. It is an excellent floor cleaner and can be used for damp mopping of all vinyl, terrazzo, marble and ceramic tile surfaces. Dilute AQUASOLVE in water using the following table as a guide: Engine degreasing 1:5. Car bodies 1:10. Wheels 1:5 Vinyl 1:20. Workshop floors 1:50 . Boat maintenance 1:30. Spray and wipe 1:60. Dilution rates may be varied according to the degree of soiling. . AQUASOLVE may be applied via a spray bottle, foam gun, pressure cleaning and steam cleaning units, or via cloth, sponge, brush, mop or soak method. Pack Sizes: 5 Litre, 20 Litres, 205 Litre Drums. Product ID: SC140. Chemicals By Industry, Marine. | Australia Wide |
| Auto Cool Green Concentrate | Auto Cool is an anti-freeze, anti-boil automotive engine coolant containing ethylene glycol. Uses: Engine Coolant. Group: Workshop Supplies. Alternative Names: Coolants. Pack Sizes: 20L. |  |
| Auto Cool Green RFU | Auto Cool is an anti-freeze, anti-boil automotive engine coolant containing ethylene glycol. Uses: Engine Coolant. Group: Workshop Supplies. Alternative Names: Coolants. Pack Sizes: 200L, 20L, 5L. | |
| Auto Cool Red Concentrate | Auto Cool is an anti-freeze, anti-boil automotive engine coolant containing ethylene glycol. Uses: Engine Coolant. Group: Workshop Supplies. Alternative Names: Coolants. Pack Sizes: 20L. | |
| Auto Cool Red RFU | Auto Cool is an anti-freeze, anti-boil automotive engine coolant containing ethylene glycol. Uses: Engine Coolant. Group: Workshop Supplies. Alternative Names: Coolants. Pack Sizes: 200L, 20L, 5L. | |
| BIG RED - Premium multi-purpose, solvent boosted cleaner, excellent for removing animal fats, oil & grease | Because of the fact that it has a pH of around 8 (relatively neutral) and gets its power from the Phosphates and Icinol solvents it is SAFE to use on all surfaces which makes it ideal to clean in and around kitchens and bathrooms. USED IN: Motor Cycle and vehicle cleaning, Makes an excellent laundry detergent for heavily soiled clothes, Range hoods and stove tops, Bathroom and basin cleaners, Will degrease engine bays and under chassis Kero will liven it up a little), Spray and wipe for bench tops, tables, motel rooms, Breaks down motel stains in linen. Distributors of WHOLESALE CHEMICALS & CLEANING PRODUCTS to the Far North Queensland region including the Atherton Tablelands the Cape & Thursday Island. Categories: All Purpose, Multi-Purpose Cleaning, Detergents, Degreasing | Cairns, Queensland QLD |
| BIOMAX DEGREASER | Biomax WATER-BASED DEGREASER. DESCRIPTION: This super strength water-based degreaser rapidly cleans oil, grease and grime from bilges, engines, bulkheads, compressors, floors and decks. It will help reduce fumes and fire danger. It is non-toxic, non-caustic, non-flammable, biodegradable and solvent-free. Approved by the Dept. of Primary Industry and Energy for use in export registered meat establishments. USES: Bilges: Add 1 - 5 L Biomaxper 25 L bilge water, depending on condition. Leave for up to 12 hours and then flush twice. Engines, Bulkheads, Machinery: Brush on Biomaxundiluted, or mix 1 part to 3 parts with water, depending on the degree of soiling. Then wash clean. General Cleaning: may be used as supplied for heavy soiling, and should be applied by brush in such instances. Allow to penetrate for 1 minute and then hose off with strong jet of water. It may also be diluted and used through pressure washers, steam cleaners and automatic scrubbers. For lighter soiling it may be diluted by up to 1:100 in hot or cold water. SAFETY: Biomaxis not classified as hazardous. Avoid contact with skin and eyes. Keep out of reach of children. Read the Material Safety Data Sheet before. Uses: Cleaning & Maintenance, Industrial Products. Product ID: 74. Categories: Cleaning & Maintenance, Industrial Products. |  Western Australia |
| Bull Grit - Premium Hand Cleaner | BULL GRIT - HAND CLEANER is a premium performance, NON-HAZARDOUS, readily biodegradable, plant based emulsifying gel hand cleaner used for the safe & efficient removal of grease, grime, paint, tar, asphalt, bitumen, engine oil, hydraulic fluid, silicones & hydrocarbons from working hands and forearms. Ideal for use in all workshops via syrup pump dispensers or dowels; this product will not leave your hands oily. Use this product with confidence as a fully functional replacement for old fashioned petrochemical solvent cleaners that will run rings around the sensitising d-limonene based hazardous products. Pack Sizes: 500M Litre x 15, 5 Litre, 20 Litres. Product ID: WC353. Chemicals By Industry, Automotive, Chemicals By Industry, Workshop. | Australia Wide |
| Citra-Gel - Grit Hand Cleaner | CITRA-GEL grit hand cleaner is a blend of natural coconut and orange oil with an inert grit that when lathered will quickly penetrate to soften and remove soils safely from hands leaving the skin clean, crisp and with a fresh citrus fragrance. CITRA-GEL has been formulated for use in the marine, mining, industrial and engineering industries for the removal of heavy grease and grimes from hands and forearms. Pack Sizes: 500M Litre, 1 Litre, 5 Litre, 20 Litres. Product ID: WC350. Chemicals By Industry, Automotive, Chemicals By Industry, Workshop. | Australia Wide |
| Citrisan | Citrisan: ORANGE OIL DEGREASER A unique non-caustic water and orange-oil based formulation is designed to clean, degrease & sanitise process equipment, floors, walls, ablution areas, ship bilges, bulkheads, trucks, locos & rolling stock, engines and much more. Categories: Mining, Industrial, Agricultural, Marine, Cleaning, DEGREASERS | Western Australia |
| CITRISAN | ORANGE OIL DEGREASER. DESCRIPTION. This unique non-caustic water and orange-oil based formulation is designed to clean, degrease and sanitise processing equipment, floors , walls and ablution areas, ship bilges and bulkheads, trucks, locos and rolling stock, engines, compressors and workshop equipment, mining machinery, etc. CitriSan contains orange oil, water conditioners, surface-active agents, emulsifiers and sanitisers. USE. For general cleaning, CitriSan may be diluted 1:20 to 1:100 in hot or cold water and used through pressure washers, steam cleaners, automatic scrubbers, or applied by mop and bucket, or as a spray and wipe. CitriSan may be used as -supplied for heavy soiling , and should be applied by brush in such instances. Allow to penetrate for 1 minute and hose off with a strong jet of water. For ships bilges, add 1-5 litres CitriSan per 25 litres bilge water, depending on condition. Leave for upto 12 hours, then flush twice. If used in food processing areas, surfaces should be thoroughly rinsed with potable water. SAFETY: Keep out of reach of children. Avoid contact with skin and eyes. Read Material Safety Data Sheet before use. Uses: Cleaning & Maintenance, Industrial Products, Vehicle Detailing. Product ID: 541. Categories: Cleaning & Maintenance, Industrial Products, Vehicle Detailing. | Western Australia |
| CLEANER AND DEODORISER | Disinfectant and Deodorizer. This unique non-caustic water and orange-oil based formulation is designed to clean, degrease and sanitise processing equipment, floors , walls and ablution areas, ship bilges and bulkheads, trucks, locos and rolling stock, engines, compressors and workshop equipment, mining machinery, etc. This Cleaner and Deodoriser contains orange oil, water conditioners, surface-active agents, emulsifiers and sanitisers. USE. For general cleaning, may be diluted 1:20 to 1:100 in hot or cold water and used through pressure washers, steam cleaners, automatic scrubbers, or applied by mop and bucket, or as a spray and wipe. May be used as supplied for heavy soiling , and should be applied by brush in such instances. Allow to penetrate for 1 minute and hose off with a strong jet of water. For ships bilges, add 1-5 litres per 25 litres bilge water, depending on condition. Leave for up to 12 hours, then flush twice. If used in food processing areas, surfaces should be thoroughly rinsed with potable water. SAFETY. Keep out of reach of children. Avoid contact with skin and eyes. Read Material Safety Data Sheet before use. Uses: Marine Products. Product ID: 552. Categories: Marine Products. | Western Australia |
| COOL PLUS CONCENTRATE | This is can be purchased as a concentrated or ready to use organic acid, water-based treatment for automotive cooling systems. It is a phosphate and silicate-free formulation containing a pH-buffered blend of additives known to reduce the corrosion of steel, cast iron, aluminium alloy, brass, copper and solder. It will not reverse pre-existing corrosion problems. It is not an anti-freeze/anti-boil type coolant and should not be used in conflict with engine manufacturers' recommendations. Cool Plus exceed the performance requirements of the following standards: ASTM D1384 "Corrosion Test for Engine Coolants in Glassware" using 20 ml per litre hard water. ASTM D4340 "Corrosion of Cast Aluminium Alloys in Engine Coolants under Heat Rejecting Conditions" using 20ml per litre hard water. Australian/New Zealand Standard 2108.1:1997 "Engine Coolants Type A and Type B for Engine Cooling Systems" using 20-30 ml per litre hard water. Uses: Cooling Systems. Product ID: 233. Categories: Cooling Systems. | Western Australia |
| COOL PLUS RTU | This is a ready to use organic acid, water-based treatment for automotive cooling systems. It is a phosphate and silicate-free formulation containing a pH-buffered blend of additives known to reduce the corrosion of steel, cast iron, aluminium alloy, brass, copper and solder. It will not reverse pre-existing corrosion problems. It is not an anti-freeze/anti-boil type coolant and should not be used in conflict with engine manufacturers' recommendations. Cool Plus RTU exceeds the performance requirements of the following standards: See Cool Plus. Uses: Cooling Systems. Product ID: 235. Categories: Cooling Systems. | Western Australia |
| COOLTECH | LONG LIFE ANTIFREEZE ANTIBOIL. DESCRIPTION. COOLTECH was designed to generally exceed the broad range of national, international and OEM standards so workshops can SAVE MONEY by having one coolant to do a wide range of vehicles. (Ref Standards list) Cooltech is recommended for all general aftermarket servicing of the trucking, mining, transport and general automotive industries. Mixing ratio 2:1. COOLTECH has a maximum service life of 4 years, 1,000,000km, 12000 hours or whichever comes first in a well maintained engine cooling circuit at 50% v/v. Chemsol advises against indiscriminate mixing of different coolant formulations. Mixing different coolants may cause precipitation of inhibitor components and potentially result in overheating and reduced corrosion protection. COOLTECH provides maximum antifreeze / anitboil protection and provides peak reliability and operation life of the water pump because it is silicate free. It also provides premium cavitation and liner pitting protection maximising protection of all metals commonly found in the engine cooling system. It contains 1010g/L of Mono ethylene Glycol. COOLTECH is a superior general-purpose coolant based on Organic Additive Technology (OAT), which is a selectively balanced mixture of organic additives. ... It is a formulation based on monoethylene glycol and is free of nitrite, phosphate and amine inhibitors. COOLTECH is produced as a green liquid. Bittering agents are deliberately added, to reduce the risk of accidental poisoning by ingestion. COOLTECH provides long life protection against scale, rust and residue build up. It allows maximum fuel economy by performing at the desired engine operation temperature. USE. COOLTECH should be used in conjunction with the recommendation by the vehicle manufacturer. In the absence of such guidance, it should be diluted with good quality water to give solutions in the concentrati | Western Australia |
| CORROSOAK | Rust and Scale Remover. Description. CorroSoak is designed for the safe removal of rust, scale and tarnish from most metal objects. It has numerous applications in the automotive, marine, construction, mining, and food processing industries, as well as many areas around the home. CorroSoak is biodegradable, water-based and contains no solvents, phosphates, mineral acids or caustic ingredients. Approved by the Dept. of Primary Industry and Energy for use in export registered meat establishments. Use. CorroSoak can be used as a radiator flushing compound to remove rust and scale buildup from the cooling system. Drain old coolant from the cooling system (including heater) and refill with water. Add 500 mls CorroSoak to the radiator and run the engine for 15 to 20 minutes. Drain and thoroughly flush the system with water before filling with coolant such as Cool Max or Cool Plus coolants. To conserve product, any loose rust or scale deposits should first be removed using a wire brush. All traces of oil and grease should be cleaned off with detergent. CorroSoak is simply diluted in hot or cold water at the rate of 1 litre concentrate to 5 litres water, and the metal object immersed for between 3 - 24 hours. Hot water works much more quickly than cold water. The object is then removed, rinsed well and dried. The diluted CorroSoak may be re-used many times. Not suitable for zinc galvanized surfaces. Use with caution on magnesium alloys, or where solder is present. Safety. CorroSoak is not classified as hazardous. Read Material Safety Data Sheet before use. Avoid contact with skin and eyes and avoid breathing vapours. The wearing of rubber gloves is recommended when handling this product. Uses: Industrial Products. Product ID: 543. Categories: Industrial Products. | Western Australia |
| DECK & CABIN WASH | Multi Purpose Marine Cleaner with Disinfectant. This is a premium quality industrial grade product unequalled in cleaning and sanitising efficiency. It emulsifies grease and oils spontaneously, even in very hard water or seawater, and disinfects while it cleans - it kills germs instantly and inhibits growth of algae. Cabin Wash has been specially formulated for the rigorous cleaning and degreasing requirements of marine vessels, industrial workshops and processing areas. It is recommended for cleaning and sanitising concrete floors, carpets, food processing equipment, fishing boat decks, bilges, weathered aluminium truck bodies, engine degreasing, etc. USE. Deck & Cabin Wash is suitable for use with all types of mechanical cleaning equipment. Generally, for cleaning manually or via pressure washers, steam cleaners, soak tank ultrasonics, or automatic scrubbers, dilute 1:10 to 1:40 in water, as required. For normal cleaning, 1 part to 20 parts water is recommended. For heavy soiling areas, it may be applied undiluted. When used in food areas, rinse away all residues with potable water. Deck & Cabin Wash may adversely affect paint finishes if left on too long or applied in direct sunlight. SAFETY. This product is strongly alkaline and proper precautions should be taken with its use. The wearing of protective gloves, goggles, etc is recommended. Avoid inhalation of spray if protective masks are not worn. DG Class 8, UN 1719, PG III. . Uses: Marine Products. Product ID: 554. Categories: Marine Products. | Western Australia |
| DIESEL INJECTOR CLEANER | PowerUp Diesel Injector Cleaner consists of a high strength blend of solvents, surface active agents and sludge dispersants for engine top-end cleaning and decarbonising by addition to the fuel tank helps cleans injectors, valves & combustion chambers restores power loss from fouled injectors & allows smoother engine running. reduces exhaust smoke. improves engine efficiency & fuel economy. helps to remove water from fuel and fuel lines. reduces the formation of wax and gum deposits. allows fuel to burn cleanly and efficiently. helps neutralize harmful acids. Uses: Fuel & Oil Treatments. Product ID: 80. Categories: Fuel & Oil Treatments. | Western Australia |
| DIESEL PARTICULATE FILTER CLEANER (DPF) | DIESEL PARTICULATE FILTER CLEANER DESCRIPTION: Diesel particulate filters are deigned to remove 85-100% of the soot particles created by incomplete combustion of the fuel/air mix in diesel engines. These particles accumulate in the DPF filter and this filter will need to be cleaned and regenerated from time to time to prevent the vehicle going in to limp mode. By using PowerUps DPF Cleaner which is a combustion catalyst, it will induce passive regeneration of the filter by enhancing the combustion process, increasing the temperature of the exhaust gasses and lowering the soot burn out temperature. This improved regeneration process reduces the need to remove the filter for cleaning because of high soot content. Also by improving the combustion process PowerUps DPF Cleaner ensures a more complete burn there for reducing the amount of diesel particle matter that will end up in the particulate filter. USE. By adding 300ml of PowerUps DPF Cleaner to approximately 30L of diesel fuel it will help burn off any built up soot, reducing back pressure of the filter and help remove any warning lights. As ongoing maintenance DPF Cleaner should be added at 300ml to approximately 60L of diesel fuel to prevent any buildup of soot in the filter. . Other Benefits. *Increase power. Improves throttle response and engine performance. Improves low temperature starting. Increase lubrication of the fuel. Cleans injectors and fuel lines. Can be used in diesel and all recognised bio-Diesels. Uses: Fuel & Oil Treatments. Product ID: 480. Categories: Fuel & Oil Treatments. | Western Australia |
| DTANE +8 | Cetane Booster. Your engine is only as good as the fuel you feed it. Cetane, which is also sometimes referred to as hexadecane or isocetane, is a colorless gas with the chemical formula C16H34. PowerUp Dtane +8 will improve the Cetane level in the diesel fuel up to 8 points depending on the quality of the fuel. How can a higher Cetane number be achieved?. There are two ways to gain a higher Cetane number. The first is to do it during the refining process. A low density fuel contains fewer BTUs and consequently provides less power to a diesel engine. Another way to gain a higher Cetane number . A higher Cetane number can also be derived through the addition of PowerUp Dtane +8 Cetane improver chemistry. When PowerUp Dtane +8 improver is added to a low Cetane diesel fuel, the result is a higher-Cetane-number fuel with more power and fuel efficiency. Dtane +8 is not only a Cetane improver but also a full fuel system maintenance additive that has many other benefits. Along with being able to absorb small amounts of water in the fuel system it will also increase the lubrication of the fuel up to 20%. Dtane Benefits. Quicker starting. Quieter operation with less diesel chatter. Improved fuel efficiency. A reduction of harmful emissions. Less wear and tear on the starter and batteries. Full system Cleaner. Improves lubrication and corrosion protection, reducing engine wear. Improves throttle response and engine performance. Improves low temperature starting. Safe with DPF filters. Suitable for common rail and direct injection diesel systems. Compatible with recognised biodiesels. Removes moisture from fuel. Use. Add 250- 300ml of PowerUp Dtane + 8 to 60 - 80L of diesel fuel. Add to fuel tank before filling with diesel to ensure proper mixing. Safety. Keep out of Reach of Children. Uses: Fuel & Oil Treatments. Product ID: 482. Categories: Fuel & Oil Treatments. | Western Australia |
| Ecosan - Cleaner & Degreaser | ECOSAN is a quick-breaking cleaner and degreasing disinfectant. It is an environmentally responsible option for degreasing, general cleaning, and disinfecting in the automotive, maritime, mining and resource industries. ECOSAN is safe on most surfaces not harmed by water alone; use ECOSAN with confidence on trucks, tankers, rigs, platforms, engines, plastics, steel, aluminium, painted surfaces, concrete and glass. Apply ECOSAN by hand, ventures, positive displacement pumps, high pressure cleaners, foaming units, mop and bucket, or spray directly onto surfaces using trigger sprays or pressure packs. DEGREASING: se as received or dilute 50/50 with warm water. Spray or brush onto contaminated surface. Allow two minutes soak time. Depending on soil contamination, some surfaces may require agitation prior to flushing or blasting off with water. For best results use hot or warm water to flush. ENERAL HARD SURFACE CLEANING: ECOSAN is versatile and may be used at dilutions ranging from 1:10 for extra heavy deposits and spot cleaning, to 1:100 for light duty cleaning applications. Use on cars, rigs, floor, benches etc. DISINFECTING & ODOUR: Use ECOSAN at a solution no weaker than 1:100 which is suitable for light duty disinfecting & cleaning of floors, wall, tiles etc. For extra heavy deposits and spot disinfecting use 1:10 with water. SOAK CLEANING: Use at rate of 1:20 with water. Immerse equipment in the solution, scrub with brush and rinse. Use a spray gun for spot cleaning or machine and or mop and bucket for floor cleaning. Always follow with a clean water rinse. Pack Sizes: 5 Litre, 20 Litres, 205 Litre Drums. Product ID: AC607. Chemicals By Industry, Marine, Chemicals By Industry, Mining. | Australia Wide |
| ENGINE AND BILGE CLEANER | WATER-BASED DEGREASER. This super strength water-based degreaser rapidly cleans oil, grease and grime from bilges, engines, bulkheads, compressors, floors and decks. It will help reduce fumes and fire danger. It is non-toxic, non-caustic, non-flammable, biodegradable and solvent-free. USE. Bilges: Add 1 - 5 L Engine and Bilge Cleaner per 25 L bilge water, depending on condition. Leave for up to 12 hours and then flush twice. Engines, Bulkheads, Machinery: Brush on Engine and Bilge Cleaner undiluted, or mix 1 part to 3 parts with water, depending on the degree of soiling. Then wash clean. General Cleaning: may be used as supplied for heavy soiling, and should be applied by brush in such instances. Allow to penetrate for 1 minute and then hose off with strong jet of water. It may also be diluted and used through pressure washers, steam cleaners and automatic scrubbers. For lighter soiling it may be diluted by up to 1:100 in hot or cold water. SAFETY. Engine and Bilge Cleaner is not classified as hazardous. Avoid contact with skin and eyes. Keep out of reach of children. Read the Material Safety Data Sheet before use. Uses: Marine Products. Product ID: 555. Categories: Marine Products. | Western Australia |
| Engine Stopleak | Engine Stopleak: Reduces oil leakage and seepage. Categories: Industrial, Mechanical, Agricultural, Engine Stop leaks | Western Australia |
| ENGINE STOP LEAK | ENGINE STOP LEAK DESCRIPTION: ENGINE StopLeak is a concentrated synthetic blend of penetrants, swelling agents and viscosity enhancers designed to help restore the sealing efficiency of leaky seals and gaskets. USE. Add about 60 ml of ENGINE StopLeak per litre of crankcase oil. Safety. ENGINE StopLeak contains hydrocarbon solvents and is classified as hazardous. Irritating to eyes and skin. Keep out of reach of children. Avoid contact with skin and eyes. Avoid breathing vapour. Read Material Safety data Sheet before use. Uses: Fuel & Oil Treatments. Product ID: 486. Categories: Fuel & Oil Treatments. | Western Australia |
| EXTOS® ET-8510 | EXTOS is a new type of CSM with improved dynamic and low temperature properties. ET-8510__Oil resistance, Similar to ET-8010 in all respects, with good resistance to oil. Key Application: Automotive parts: Synchronous timing belts, poly-V-belts, coverings for the weatherstrips, Train parts : Coupling coverings, Engineering and building articles: Building gaskets. Group: Specialty chemicals, polymers. Composition: Alkylated Polyethylene. Application: Rubber & Elastomers. Physical Form: Solid. Product Code: PIM000032223. | Australia |
| Fleet Clean Green - Degreaser | FLEET CLEAN GREEN Automotive Cleaner & Degreaser is a NON HAZADOUS, rust preventing, environmentally responsible concentrate. FLEET CLEAN GREEN can safely & efficiently remove road film, grease, oils, grime, wax, carbon deposits, ink dyes, gum, pencil, crayon marks, animal fats, vegetable soils and soap residues. FLEET CLEAN GREEN is suitable to use on most metal, glass, wood, vinyl, washable painted surfaces and plastics and is compatible with most carwash & foaming systems. General Cleaning: FLEET CLEAN GREEN can be foamed or brushed on at dilution ratios ranging from 1:10 to 1:100. For best results and improved economy use hot water with agitation. Degreasing: Apply neat with squirt bottle or paint brush. Allow 2 minutes to work then agitate and flush with water. For best results warm engine or object before degreasing. Pack Sizes: 5 Litre, 20 Litres, 205 Litre Drums, 1000 Litres. Product ID: WC480. Chemicals By Industry, Universal Products. | Australia Wide |
| Gear Oil Fortifier | Gear Oil Fortifier: This blend of synthetic additives is designed to enhance the performance of lubricants, particularly in old or worn engines and industrial gear boxes. Categories: Mining, Industrial, Mechanical, Agricultural, Marine, Lubricates & Oils | Western Australia |
| GP Degreaser | GP Degreaser: Super strength water-based degreaser. Rapidly cleans oil, grease and grime from bilges, engines, bulkheads, compressors, floors and decks. Helps reduce fumes and fire danger. Is non-toxic, non-caustic, non-flammable, biodegradable and solvent-free. Categories: Mining, Industrial, Cleaning, Agricultural, Marine, General Purpose Degreasers, Water Based Degreasers | Western Australia |
| GREASE LIFTER | Solvent Based Degreaser. Description. This is a powerful blend of solvents and emulsifying surfactants designed for cleaning, dispersing and degreasing operations by soak, spray or brush application. It has the following features: Low flammability (high flash point). Safe on all metals. Will not damage paintwork when used as directed. Rinses off easily in cold water (even seawater). Rapidly dissolves most oils, greases, lubricants etc. Low evaporation rate. Low electrical conductivity. Contains no chlorinated solvents. Grease Lifter is ideal for general clean-up operations on engines, heavy machinery, compressors and workshop equipment, floors and driveways. It is suitable for cleaning bilges and tanks, and for treating oil spills on decks and piers. Grease Lifter is recommended as a pre-cleaning detergent prior to alkaline cleansing or decarbonising operations. It can also be used for dewaxing vehicles and spot cleaning and degreasing of painted surfaces, providing there is an immediate cold water rinse afterward. Use. For heavy soiling, apply by brush allowing Grease Lifter to penetrate for 1-2 minutes, then hose off with a strong jet of water. Safety. Grease Lifter contains hydrocarbon solvents. Read Material Safety Data Sheet before use. Prolonged exposure to the skin may remove natural fats and cause irritation. Avoid contact with eyes, and inhalation of spray mist. Uses: Industrial Products. Product ID: 544. Categories: Industrial Products. | Western Australia |
| ITAMID FL520 | ITAMID FL520 is a low viscosity polyamidoamine adduct specifically designed for epoxy flooring and civil engineering applications in conditions of high humidity and/or wet substrates. ITAMID FL520 is the version with a longer pot life and lower reactivity compared to ITAMID FL520/S and ITAMID FL521/S. Group: Specialty chemicals, polymers, paints & coatings. Composition: Formulated Low Viscosity Polyamidoamine Adduct. Application: Adhesives & Sealants, Can, Coil and Industrial, Construction, Printing Inks, Thermosets & Composites. Function: Amino - Melamine - Urea Resins. Physical Form: Liquid. Product Code: PIM000003645. | Australia |
| ITAMID FL520/S | ITAMID FL520/S is a low viscosity polyamidoamine adduct specifically designed for epoxy flooring and civil engineering applications in conditions of high humidity and/or wet substrates. ITAMID FL520/S is the version with higher reactivity compared to ITAMID FL520. Group: Specialty chemicals, polymers, paints & coatings. Composition: Formulated Low Viscosity Polyamidoamine Adduct. Application: Adhesives & Sealants, Can, Coil and Industrial, Construction, Printing Inks, Thermosets & Composites. Function: Amino - Melamine - Urea Resins. Physical Form: Liquid. Product Code: PIM000003646. | Australia |
| KRONOS 2230 | KRONOS 2230 is a treated rutile for polycarbonate and other engineering plastics. Group: Specialty chemicals, polymers, paints & coatings. CAS No. 13463-67-7. Composition: TiO2 Rutile CP. Application: Architectural and Deco., Can, Coil and Industrial, Masterbatch & Compounders. Function: TiO2. Physical Form: Micronized Powder. Product Code: PIM000002082. | Australia |
| LAUNDRY LIQUID | LAUNDRY LIQUID & MULTIPURPOSE DETERGENT. DESCRIPTION. This is a premium quality product, specially formulated to be environmentally friendly whilst retaining optimum cleaning efficiency. Biodegradable. Contains no phosphates. Contains no synthetic dyes, fragrances or thickeners. Contains no caustic ingredients. Compatible with hard water. Free flowing for easier pouring. Suitable for hot or cold washing. Has many other uses (see below). USE. Laundry Washing . Light-Med Soiling Heavy Soiling. Large toploading automatics 50 ml 100 ml. Medium toploading automatics 40 ml 80 ml. Twin Tubs etc. 25 ml 50 ml. A little may be applied undiluted to stains immediately prior to the wash, or it may used for presoaking at up to 50-80 ml per 10 litres water. Suitable for all fabrics except wool or silk. Floor Mopping. Add 20-40 ml per 10 litre bucket of cold or warm water. Apply by mop or sponge. Suitable for all vinyl and tiled floors. Glass and Window Cleaning. Mix 5ml with 200ml methylated spirits and 300ml water. Spray on mirrors, windows or other glass surfaces; wipe off with lint-free cloth or paper towelling. Spray and Wipe Cleaning. Mix 25ml with 200ml methylated spirits and 300ml water. For effective cleaning and degreasing of kitchen and other hard surface areas, spray on and wipe off. Car Washing. Add 25-50ml per 10 litre bucket of cold water. Apply by chamois or soft sponge and hose off thoroughly. Avoid washing car in direct sunlight. Degreasing. Dilute 50:50 in kerosene and stir or shake well just prior to use. Suitable for cleaning and degreasing car engines, lawn mowers, machinery etc. Apply by (e.g.) paintbrush, allow several minutes to penetrate and hose clean. Safety. Keep out of reach from children. Uses: Cleaning & Maintenance. Product ID: 503. Categories: Cleaning & Maintenance. | Western Australia |
| MIRACLE LUBE | ANTI-CORROSION LUBRICANT: Available in liquid or aerosol form. DESCRIPTION. This unique multipurpose product is designed to displace moisture, penetrate rusted parts, lubricate, stop squeaks, clean surfaces, and protect them from corrosion. It has numerous uses in automotive and marine maintenance, transport, engineering, industrial and commercial equipment. Miracle Lube is pH neutral, electrically non-conductive, non-corrosive, non-toxic, non-staining and non-flammable. It does not dry out, become sticky, or wash off with water, and contains no silicones, kerosene or acid forming ingredients. USE. Miracle Lube will not harm metals (including stainless steel, aluminium, copper, brass and ferrous alloys), plastic, enamel, laminex, fibreglass, painted surfaces, neoprene seals, electrical insulators, vinyl, etc. For normal use, just spray or brush Miracle Lube onto area to be treated. Items such as rusted nuts and bolts may be soaked for as long as is required. Miracle Lube also works effectively as a chain lubricant and a cutting oil for lathe work, milling, grinding, or honing of all metals. It maintains machine-finished surfaces moisture and corrosion free for long periods. SAFETY. Miracle Lube is not classified as hazardous. Read Material Safety Data Sheet before use. Avoid inhalation of spray mist during use. Pack Sizes: 1 litre and 5 litres. Product ID: 847. | Western Australia |
| Multi-Safe | MULTI-SAFE is a powerful orange based environmentally responsible cleaner concentrate. MULTI-SAFE is an all in one product designed to be on the inventory of every establishment that requires a safe and efficient all-purpose cleaning solution. The product can remove grease, oils, grime, wax, carbon deposits, ink dyes, gum, pencil, crayon marks, animal fats, vegetable soils and soap residues. General Cleaning: MULTI-SAFE should be used at 30ml per litre of water. For heavy soils use 50/60ml per litre of water. For best results use hot water with agitation. Degreasing: Apply neat with squirt bottle or paint brush. Allow 2 minutes to work then agitate and flush with water. For best results warm engine or object before degreasing. Product is compatible with most interceptors (ie MULTI-SAFE will break). Pack Sizes: 5 Litre, 20 Litres, 205 Litre Drums. Product ID: AC606. Chemicals By Industry, Universal Products. | Australia Wide |
| Oil Fortifier | Oil Fortifier: This blend of synthetic additives enhances the performance of API, SAE and CCMC engine oils and lubricants, particularly in old or worn engines. Categories: Mining, Industrial, Mechanical, Agricultural, Marine, Oil Fortifiers & Additives | Western Australia |
| OIL FORTIFIER | OIL FORTIFIER DESCRIPTION: This blend of synthetic additives is designed to enhance the performance of API, SAE and CCMC engine oils and lubricants, particularly in old or worn engines. It provides the following benefits: * Boosts oil viscosity. Improves compression. Maintains oil pressure. Reduces oil consumption. Reduces wear. Reduces corrosion. Reduces exhaust smoke. Reduces engine noise. USE: When engine is at normal operating temperature, run at a fast idle and add 300ml Oil Fortifier per 5 litres crankcase oil. SAFETY: Oil Fortifier is not classified as hazardous. Read Material Safety Data Sheet before use. Spillages may be slippery. Uses: Fuel & Oil Treatments. Product ID: 487. Categories: Fuel & Oil Treatments. | Western Australia |
| PEPTIDE Q10 | PEPTIDE Q10 biofunctional by Ashland Specialty Chemical acts as an anti-aging, anti-wrinkle, antioxidant and skin energizing agent. It is a bioengineered peptide designed to help boost the endogenous synthesis of Coenzyme Q10 and enhance the skins natural antioxidant defence. It helps the skin protect against free radicals and boosts ATP synthesis. It helps diminish the appearance of wrinkles and fine lines. Group: Personal care ingredients, cosmetics & toiletries. CAS No. 504-63-2. Composition: Glycol. Application: Skin Care, Baby Care. Function: Antioxidant. Physical Form: Liquid. Recommended Dosage: 0.5-1%. INCI Name: Water (and) Propanediol (and) Pentapeptide-34 Trifluoroacetate. Claim: Anti-Wrinkle, Anti-Aging. Product Code: PIM000004935. | Australia |
| PETROL INJECTOR CLEANER | PowerUp Petrol Injector Cleaner consists of a high strength blend of solvents, surface active agents and sludge dispersants for engine top-end cleaning and decarbonising by addition to the fuel tank or by using automatic flushing equipment. Fuel injectors should be maintained in peak condition to ensure your engine is operating efficiently providing optimum power and minimum fuel use. City stop- start driving and low quality fuel causes unburnt fuel to form deposits on the fuel injector nozzles which in turn deforms the spray pattern to the cylinders and results in poor engine performance. The addition of PowerUp Injector Cleaner to the fuel tank on a regular basis ensures that the complete fuel system is maintained in good condition preventing carbon build up in the injectors and inlet valves and poor atomisation of the fuel. PowerUp Injector Cleaners provide the following benefits: * helps cleans injectors, valves & combustion chambers. restores power loss from fouled injectors & allows smoother engine running. reduces exhaust emissions. improves engine efficiency & fuel economy. Petrol Injector Cleaner is suitable for use in all petrol engines. Dissipates water in the fuel and helps prevent algae formation. Uses: Fuel & Oil Treatments. Product ID: 202. Categories: Fuel & Oil Treatments. | Western Australia |
| PHYTORNX BAOBAB | PHYTORNX BAOBAB biofunctional by Ashland Specialty Chemical acts as an anti-aging agent. It is based on the cellular nucleic acids of the baobab tree. Its extraction is done by a patent-pending extraction system engineered to increase the yield of small RNAs and the small ribonucleic acids. Group: Personal care ingredients, cosmetics & toiletries. Composition: Vegetal Extract. Application: Sun Care, Skin Care, Baby Care. Function: Antioxidant. Physical Form: Liquid. Recommended Dosage: 1 - 3%. INCI Name: Water (and) Glycerin (and) Hydrolyzed Adansonia Digitata Extract. Claim: Anti-Aging, Moisturizing. Product Code: PIM000004942. | Australia |
| Predator - Truckwash & Degreaser | PREDATOR is a heavy duty alkaline detergent formulated for quick and easy removal of road film, exhaust marks, brake dust, soils, dirt, grime, grease and oils from vehicles, heavy machinery, driveways, concrete, floors & walls in non food areas. PREDATOR is available in large commercial bulk quantities. Use discount code GREASY15% at checkout. Valid until 30/11/2022. Apply neat or diluted solution via a spray bottle, foam gun, pressure cleaner, cloth, sponge, brush, mop or soak method. Engine Degreasing 1:1 to 1:6. Foam Cleaning 1:20 to 1:80. Floor Cleaning 1:5 to 1:20. Spray & Wipe Cleaning 1:40 to 1:160. Vehicle Washing External & Internal 1:40 to 1:200. Pack Sizes: 5 Litre, 20 Litres, 205 Litre Drums, 1000 Litres. Product ID: WC6102. Chemicals By Industry, Automotive, Chemicals By Industry, Mining, Chemicals By Industry, Workshop. | Australia Wide |
| PROFLUSH | Pro Flush is a specially formulated blend of penetrants, lubricants and sludge dispersants designed for use in all petrol and diesel engines. It provides the following benefits: Cleans all engine parts. Removes harmful sludge and other contaminants. Cleans valves and hydraulic valve lifters. Frees piston rings. Reduces fuel consumption. Contains no harmful aromatic hydrocarbons. Fortified with Extreme Pressure additives to ensure engine protection. Uses: Fuel & Oil Treatments. Product ID: 203. Categories: Fuel & Oil Treatments. | Western Australia |
| PU OIL Protech Chain and Bar Oil 150 | PROTECH CHAIN & BAR OIL. PROTECH Chain & Bar Oil is for chain saw applications formulated to provide maximum protection of chains, bars and sprockets. It contains anti-wear and extreme pressure additives to reduce wear and ensure maximum life for chains, bars and sprockets. Features and Benefits. Has a high level of tackiness additive to ensure maximum cling thus reducing oil consumption due to fling off from moving chains and sprockets. Is compatible with all materials used in chain saws. Minimizes even in professionally used saws running at full power thus reducing maintenance and service costs. Experience has shown that the use of low quality chain oil leads to high chain link wear due to build-up of sawdust, sap and chain oil, reducing the linear flexibility of the chain. This ultimately causes the engine to stall, and in some cases the chain will need re-tensioning after only a few cuts. Field trials have shown that Protech Chain & Bar Oil effectively eliminates this problem. Uses: Performance Oils. Product ID: 301. Categories: Performance Oils. | Western Australia |
| PU OIL Protech TC 2 Stroke Oil | Protech 2 STROKE OIL. Features and Benefits. 2-STROKE TC is a low ash high performance two stroke engine oil, suitable for use in all two stroke Japanese. and European motorcycle engines, lawn mowers, brush cutters and chainsaws. 2-STROKE TC is specifically recommended for lubrication of two-stroke engines that require API TC and JASO. FC performance levels. Applications. 2-STROKE TC is not recommended for water-cooled two-stroke marine outboards. 2-STROKE TC should be used in conjunction with the engine manufacturers recommendation regarding fuel/oil. ratio, however, in the absence of such information a 50 to 1 fuel/oil ratio is advised. Approvals / Recommendations. JASO FC. API TC. ISO-L-EGC. TISI 1040-2534. BIS T-SL4. Uses: Performance Oils. Product ID: 304. Categories: Performance Oils. | Western Australia |
| PU OIL Protech TCW3 Outboard oil | Protech OUTBOARD OIL TCW 3. PROTECH OUTBOARD OIL TCW3 is a premium low smoke engine oil combined with an ashless additive system. designed for all water cooled two stroke outboard engines including oil injected and pre mix systems. PROTECH OUTBOARD OIL TCW3 meets and exceeds the following specifications. NMMA TCW 3. Applications. SUPER OUTBOARD OIL is self-mixing and suitable for oil injection systems often fitted to modern two stroke. outboards. SUPER OUTBOARD OIL should be mixed according to the ratio recommended by the manufacturer. It can be. used at fuel/oil ratios of up to 100/1 however, 50/1 ratio is advised in the absence of engine recommendations. Approvals / Applications. SUPER OUTBOARD OIL is exceeds the National Manufacturers Association (NMMA) specifications for service. TC-W3. SUPER OUTBOARD OIL assists in maintaining engine cleanliness in all water cooled two stroke outboard. engines or air cooled engines using both leaded and unleaded fuels. Suitable for use in E85 in competition. only. Uses: Performance Oils. Product ID: 305. Categories: Performance Oils. | Western Australia |
| PU OIL Syntech 10W30 SN/CF4 | SYNTECH 10W30 SN/CF. SEMI SYNTHETIC MADE FROM HYDROCRAKED BASE STOCKS. SYNTECH 10W30 SN/CF is a petrol oil designed for cars and light trucks, especially those with high revving. engines and meets the latest ILSAC GF-5 and SN/CF requirements. Highlights of this oil include the highest protection against sludge, deposits, valve train wear and catalytic. converter fouling due to phosphorous volatility. Features and Benefits. Outstanding control of cam wear. Better piston cleanliness and excellent engine sludge protection. Excellent control of oxidation and oil loss due to volatility. Better high temperature wear protection. Fully compatible with prior ILSAC and API categories. Approvals and Recommendations. SYNTECH 10W30 SN/CF meets a range of OEM/Industry specifications including. SAE 10W30. API SN/CF. ILSAC GF-5. Legacy GM Service Fill. Ford Service Fill. Chrysler Service Fill. Uses: Performance Oils. Product ID: 367. Categories: Performance Oils. | Western Australia |
| PU OIL Syntech 10W40 oil- SN/CF4 | SYNTECH 10W40 SN/CF. SEMI SYNTHETIC MADE FROM HYDROCRAKED BASE STOCKS. SYNTECH 10W40 SN/CF is a petrol oil designed for cars and light trucks, especially those with high revving. engines and meets the latest ILSAC GF-5 and SN/CF requirements. Highlights of this oil include the highest protection against sludge, deposits, valve train wear and catalytic. converter fouling due to phosphorous volatility. Features. Outstanding control of cam wear. Better piston cleanliness and excellent engine sludge protection. Excellent control of oxidation and oil loss due to volatility. Better high temperature wear protection. Fully compatible with prior ILSAC and API categories. Approvals and Recommendations. SYNTECH 10W40 SN/CF meets a range of OEM/Industry specifications including. SAE 10W40. API SN/CF. ILSAC GF-5. Legacy GM Service Fill. Ford Service Fill. Chrysler Service Fill. Uses: Performance Oils. Product ID: 369. Categories: Performance Oils. | Western Australia |
| PU OIL Syntech 15W40 CK4 Low SAPS OEM | SYNTECH 15W40 CK4/SN. SEMI SYNTHETIC OIL MADE FROM HYDROCRACKED BASE STOCKS. Features and Benefits. Syntech 15W40 CK4/SN is a Low SAPS, new generation, premium heavy duty diesel oil that has been. formulated specifically to meet the latest Euro VI requirements of Australian and imported designed low. emission engines. Designed and formulated to provide exceptional protection for highly rated diesel engines. running in severe service conditions. It affords increased fuel economy, long drain intervals and prolonged. engine life. OEM approved - Cummins, Detroit Diesel, Volvo, Mack, Renault. Specially formulated to protect after exhaust systems. Excellent soot dispersancy. Superior friction and wear control. Longer drain intervals. Approvals / Recommendations. 15W40 CK4/SN meets or exceeds the following specifications. API CK-4/CJ-4/CI-4+/CI-4. MAN 3275 & 3575. ACEA E7-12, E9-12. DQC III-10-LA. CATERPILLAR ECF-3. MTU 2.1. MB 228.31. FORD WSS-M2C171-E. FORD WSS-M2C171-F1. MACK EO-O PREMIUM PLUS. Volvo VDS-4- Approval Yes. Mack EO-S 4.5- Approval Yes. Renault VI RLD-3- Approval Yes. Cummins CES 20086- Approval Yes. Detroit Diesel DDC93k222- Approval Yes. Applications. Recommended for high speed, turbocharged diesel and petrol engines, in particular all emission design engines. Specially formulated to protect exhaust after treatment devices such as diesel particulate filters (DPFs). Uses: Performance Oils. Product ID: 375. Categories: Performance Oils. | Western Australia |
| PU OIL Syntech 15W40 oil CI4 | SYNTCH OIL 15W40 API CI4/SN. SEMI SYNTHETIC OIL MADE FROM HYDROCRACKED BASE STOCKS. SYNTECH 15W40 API SN/CI-4 is a premium quality engine oil for turbocharged diesel engines running. under severe conditions with extended drain intervals according to the manufacturers. recommendation. It is designed for highly rated diesel engines meeting Euro I, II, III, IV and Euro. V emission requirements. This oil provides effective control with respect to piston cleanliness and. bore polishing. It further provides excellent wear control, soot handling and lubricant stability. Approvals / Recommendations. SYNTECH 15W40 API SN/CI-4 meets or exceeds the following Industry Specifications. API CI-4/SL-licensed (SAE 15W-40). MB 228.83 (SAE 15W-40). Volvo VDS-3 (SAE 15W-40). Cummins CES 20078 (SAE 15W-40). MAN M3275 (SAE 15W-40). Mack EO-N (SAE 15W-40). MTU Category 2 (SAE 15W-40). Renault RLD-2 (SAE 15W-40). Deutz DQC III-10 (SAE 15W-40). JSC KAMAZ (SAE 15W-40). JSC Avtodiesel (YaMZ) 15W40. JSC TMZ (Tutaev) 15W-40. API CI-4/SL. ACEA E7-08, A3/B4-04. Cummins CES 20071/2/6/7 (SAE 15W-40). Mack E-OM Plus (SAE 15W-40). Global DHD-1(SAE 15W-40). DCAT ECF-1-a / ECF-2 (15W-40). Deutz DQC III-05 (SAE 15W-40). Uses: Performance Oils. Product ID: 373. Categories: Performance Oils. | Western Australia |
| PU OIL Syntech 15W40 oil CJ4- Low SAPS | SYNTECH 15W40 CJ4/SN. SEMI SYNTHETIC OIL MADE FROM HYDROCRACKED BASE STOCKS. Features and Benefits. Syntech 15W40 CJ4/SN is a heavy duty Low SAPS. premium diesel lubricant incorporating the most. advanced development in lubrication chemistry and. high viscosity index premium base oils resulting in a. high performance diesel engine oil. Syntech 15W40 CJ4/SN has been formulated. specifically to meet the requirements of Australian. and imported designed low emission engines. including those engines which incorporate exhaust. gas recycling (EGR) to provide fuel efficiency, high. wear protection and long drain capability. EGR can. add to deposits forming in the combustion chamber. and therefore the low sulphated ash content assists in. maintaining engine cleanliness. Approvals / Recommendations. 15W40 CJ4/SN meets or exceeds the following. specifications. API CJ-4, CI-4 PLUS, CH-4, CF API, SN, SL, SJ . ACEA E9. ACEA E7. Mack EO-O Premium Plus. John Deere -PierIV. Caterpillar ECF-3. Cummins CES 20081. JASO DH-2. MAN 3275 & 3575. Volvo VDS-4, VDS-3 extended drain. MB 228.31. MTU Type 2.1. Renault Truck RLD-3. Deitz DQC III-05. Detroit Diesel DDC 93K218. Applications. Recommended for high speed, turbocharged. diesel and petrol engines, in particular all. emission design engines. Specially formulated to protect exhaust after. treatment devices such as diesel particulate. filters (DPFs). Uses: Performance Oils. Product ID: 374. Categories: Performance Oils. | Western Australia |
| PU OIL Syntech 15W40 SN/CF4 | Syntech 15W40 SN/CF. SEMI SYNTHETIC MADE FROM HYDROCRAKED BASE STOCKS. SYNTECH 15W40 SN/CF is a multi grade engine oil that provides superior engine protection suitable for. todays multi-valve and conventional engines. Incorporating the latest additive technology, designed for todays. conditions, It provides optimum protection against sludge formation, higher temperatures and helps keep the. engine clean and free of deposits under high speed high stress motoring conditions. SYNTECH 15W40 SN provides good wear protection at low temperatures combining easy low temperature. engine startup and fast oil circulation at cold start up when the engine is at its most critical. Applications. SYNTECH 15W40 SN/CF is formulated for all types of passenger, 4WD, and light commercial vehicle engines. covering Petrol, Diesel and LPG naturally aspirated or turbo charged. SYNTECH 15W40 SN/CF meets or exceeds the requirements of an SN/CF engine oil. It has an highly effective. detergent and dispersant system to keep engine internals clean. It provides a high level of protection against wear and assists in energy conservation and fuel economy. Approvals / Recommendations. SYNTECH 15W40 SN/CF meets or exceeds the following specifications. API SN/CF. FORD ESE-M2C153E. ACEA A3/B4. VW 502.00/505.00. Legacy Service Fill. Ford Service Fill. Chrysler Service Fill. Typical Data. Typical Data Unit Results. Specific Gravity @ 15°C 0.878. Viscosity @ 40°C mm2/s (cSt) 103. Viscosity @ 100°C mm2/s (cSt) 14.5. Viscosity Index 14.5. Minor variations in product typical test data are to be expected in normal manufacturing. Uses: Performance Oils. Product ID: 372. Categories: Performance Oils. | Western Australia |
| PU OIL Syntech FS 5W30 Full syn- Low Ash SN/CF | SYNTECH FS 5W30. SYNTECH 5W30 is a full synthetic petrol/diesel motor oil formulated with advanced synthetic base stocks and a. premium additive. It has a broad viscosity range providing the highest level of protection in the most demanding. of conditions and allowing for maximum drain intervals. SYNTECH 5W30 is a low pour point motor oil ensuring. quick lubrication to all moving parts during cold weather starts. It also provides protection against wear and. corrosion, prevents oxidative thickening and inhibits promotion of engine acids, sludge and varnish deposits. Features and Benefits. SYNTECH 5W30 meets or exceeds the requirements of an SN/CF engine oil and is suitable for unleaded or. leaded fuelled engines, diesel powered cars, turbo charged and naturally aspirated engines and LPG engines. Specifications. API SN / CF / CF-2. ACEA A3/B4, A3/B3, A5/B5. BMW LL-O/M54. DAIMLER CHRYSLER MS 6395K. GM dexos 1. MB 229.1, 229.5. Typical Data. CHARACTERISTICS 5W30 SN/CF. Specific Gravity @ 15°C 0.854. Kinematic Viscosity @ 40°C, mm2/s (cSt) 67. Kinematic Viscosity @ 100°C, mm2/s (cSt) 11.2. Viscosity Index 161. MIL-L-2104B. MIL-L-46152. LAND ROVER. PSA B 71 2300. RENAULT 0700. VW 50200, 50300, 50500, 50600. Uses: Performance Oils. Product ID: 359. Categories: Performance Oils. | Western Australia |
| PU OIL Syntech FS C3 0W30 Full syn- Low Ash SN/CF | Syntech FS C3 0W30. FULLY SYNTHETIC, LOW SAPS, ULTRA HIGH PERFORMANCE LONG DRAIN. SYNTECH FS C3 0W30 is designed for European engines requiring SHPD (Super High Performance Diesel). level of performance and those which comply with Euro 1, Euro 2, Euro 3 and Euro 4 exhaust emission. legislation. SYNTECH FS C3 0W30 is a full synthetic PAO based formulation and is suitable for use where. particulate filters are used. SYNTECH FS C3 0W30 offers long drain intervals, sustains maximum performance. even under high stress and delivers unsurpassed levels of protection. Features and Benefits. SYNTECH FS C3 0W30 has outstanding low temperature viscometrics for reduced wear at start up and is a. dedicated European formulation with Low/ Mid SAPS (Sulfated Ash, Phosphorus and Sulfur). SYNTECH FS C3 0W30 has superior soot and sludge control resulting in cleaner engines and reduces fuel. consumption due to superior technology. Approvals and Recommendations. SYNTECH FS C3 0W30 meets or exceeds the following specifications. ACEA A3/B3-08, A3/B4-04. ACEA A1/B1-10, A5/B5-10. ACEA C2, C3. API SN/CF. VW 502 00/505 00/505 01. Uses: Performance Oils. Product ID: 361. Categories: Performance Oils. | Western Australia |
| PU OIL Syntech FS C3 5W30 Full Syn- Low Saps | SYNTECH FS SYNC C3 LONG DRAIN 5W30. FULLY SYNTHETIC, LOW SAPS, ULTRA HIGH PERFORMANCE OIL. SYNTECH FS LOW SAPS 5W30 is the most advanced development in lubrication chemistry and complies with. the demanding requirements or Euro 4 exhaust emission legislation. SYNTECH FS LOW SAPS 5W30 is ideally designed for European engines requiring SHPD level of performance. and those which comply with Euro 1, Euro 2, Euro 3 and Euro 4 exhaust emission legislation. Features and Benefits. Fully synthetic formulation and is suitable for use where particulate filters are used. Has excellent soot and sludge control resulting in cleaner engines and reduces fuel consumption due to. superior technology. Has outstanding low temperature viscometrics for reduced wear at start up and is a dedicated European. formulation with low/mid SAPS (Sulfated Ash, Phosphorus and Sulfur). Approvals and Recommendations. SYNTECH FS LOW SAPS 5W30 meets or exceeds the following Industry Specifications. ACEA C2-10 (2010). ACEA C3-10 (2010). ACEA A3/B4-04 (2004). ACEA A3/B3-08 (2008). ACEA A1/B1-10 (2010). ACEA A5/B5-10 (2010). API SN. API CF. MB 229.51/229.31. VW 50200 (2005). VW 50501 (2005). VW 50500 (2005). GM DEXOS 2. RENAULT RN 700/0710. BMW LL-04. . Uses: Performance Oils. Product ID: 362. Categories: Performance Oils. | Western Australia |
| PU OIL Syntech FS C3 5W40 Full Syn- Low Saps | SYNTECH FS C3 5W40 LONG DRAIN. FULLY SYNTHETIC, LOW SAPS, ULTRA HIGH PERFORMANCE OIL. SYNTECH FS C3 Low SAPS 5W40 LONGDRAIN OIL is the most advanced development in lubrication. chemistry and complies with the demanding requirements of Euro 4 exhaust emission legislation. SYNTECH FS. C3 Low Saps 5W40 is ideally designed for European engines requiring SHPD level of performance and those. which comply with Euro 1, Euro 2, Euro 3 and Euro 4 Exhaust emission legislation. Approvals and Recommendations. SYNTECH FS C3 0W30 meets or exceeds the following specifications. MB 229.51. ACEA C3-10 (2010). ACEA C2. API SN. AAPI CF. BMW LL- 04. VW 502.00 (2005). VW 505.00 (2005). VW 505.01 (2005). Porsche A40. GM Dexos 2. Features and Benefits. SYNTECH FS C3 Low Saps 5W40 is a full synthetic. formulation and is suitable for use where particulate. filters are used. SYNTECH FS C3 Low Saps 5W40 has excellent soot. and sludge control resulting in cleaner engines and. reduces fuel consumption due to superior technology. SYNTECH FS C3 Low Saps 5W40 has outstanding low. temperature viscometrics for reduced wear at start up. and is a dedicated European Formulation with Low/Mid. SAPS (Sulfated Ash, Phosphorus and Sulfur). Uses: Performance Oils. Product ID: 363. Categories: Performance Oils. | Western Australia |
| PU OIL Syntech FS C4 5W30 Full Syn- Low Saps | Syntech FS C4 5W30 LONG DRAIN. FULLY SYNTHETIC, LOW SAPS, ULTRA HIGH PERFORMANCE OIL. SYNERGY EURO Low SAPS 5W30 C4 is the most advanced development in lubrication chemistry and. complies with the demanding requirements of Euro IV and Euro V exhaust emission legislation. Ideally designed. for European engines (especially for late model Renault diesel passenger cars) requiring SHPD (Super High. Performance Diesel) level of performance and those which comply with Euro IV and Euro V exhaust emission. legislation. SYNTECH FS LOW SAPS 5W30 C4 is a full synthetic formulation and is suitable for use where diesel particulate. filters (DPF) are used. Low SAPS 5W30 C4 has excellent soot and sludge control resulting in cleaner engines. and reduces fuel consumption due to superior technology. has outstanding low temperature viscometrics for. reduced wear at start up and is a dedicated European formulation with Low SAPS (Sulfated Ash, Phosphorus. and Sulfur). Uses: Performance Oils. Product ID: 366. Categories: Performance Oils. | Western Australia |
| PU OIL Syntech PAO 5W30 Full Syn VW 504,507 | SYNTECH FS 5W30 VW 504-507. FULLY SYNTHETIC, LOW SAPS, ULTRA HIGH PERFORMANCE OIL. SYNTECH FS 5W30 VW 504 is a new Low SAPS generation oil especially developed for Volkswagen Group. engines. It is designed to be used in all Diesel and Petrol engines, especially those respecting the Euro 4. standards for the reduction of polluting omissions. SYNTECH FS 5W30 VW 504-507 is ideally designed for European engines requiring SHPD level of performance. and those which comply with Euro 1, Euro 2, Euro 3 and Euro 4 exhaust emission legislation. Features and Benefits. VW 504/507 has been developed with Clean performance technology reducing long term blocking of the. particulate filters thereby prolonging its life span and maintaining engine performance. VW 504/507 guarantees a rapid build-up of a stable oil film at cold start, that remains stable at high operating. temperatures, while friction is reduced in order to provide greater fuel economy. VW 504/507 incorporates the highest level of anti wear, anti corrosion and anti foam properties available and. allows extra long drain intervals (30,000 - 50,000 kms), thanks to an exceptional oxidation resistance. VW 504/507 ensures a greater respect for the environment through its reduced omissions. Approvals / Recommendations. SYNTECH FS 5W30 VW 504-507 meets or exceeds the following Industry Specifications. ACEA A3/B4-04 (2004) ACEA C3. Volkswagen VW 504.00. Volkswagen VW 507.00. BMW Longlife 04. MB 229. 31, 229.51. Uses: Performance Oils. Product ID: 364. Categories: Performance Oils. | Western Australia |
| Slip - Oil Antiwear Additive | Slip - Oil Antiwear Additive: Special blend of surface modifying lubricants and anti-corrosion agents designed specifically to reduce metal to metal friction between all moving parts in engines (inc 2-stroke ), gearboxes, differentials (except limited slip), bearings pumps etc. Categories: Industrial, Mechanical, Agricultural, Marine, Anti Wear Lubricants | Western Australia |
| SLIP OIL CONDITIONER | SLIP OIL ANTIWEAR ADDITIVE. DESCRIPTION. Slip Oil Antiwear Additive is a special blend of surface modifying lubricants and anticorrosion agents designed specifically to reduce metal to metal friction between all moving parts. It provides the following benefits: * Reduces friction. Reduces metal wear. Reduces oil temperature. Prolongs oil life. Reduces fuel consumption. Promotes smoother engine operation. Resists corrosion. Resists harmful crankcase gases. Reduces maintenance costs. Increases power output. Extends cutting tool life. DIRECTIONS. Slip is suitable for use in engines (including 2-stroke engines), gearboxes, differentials (except limited slip differentials), bearings, pumps, etc. Add 60 mls Slip Oil Antiwear Additive per litre of engine, gear or differential oil at each oil change. Use 40 mls per litre in bearing grease, pump oil, etc. Slip may be used undiluted with excellent results in machine shops, for general drilling, tapping, punching, threading and broaching, and for low or high sped lathe work. It is suitable for use on bits, blades, lathe tools and hole saws. By reducing friction Slip reduces cutting tool temperatures and extends tool life substantially. SAFETY. Slip is not classified as hazardous. Read Material Safety Data Sheet before use. Keep out of reach of children. Spillages may be slippery. PROPERTIES. Appearance: Oily amber liquid. pH: Neutral. Specific Gravity: Approx. 1.25. % Solids: > 98%. Boiling Point: > 200oC. Flash Point: > 200oC. Flammability: Non flammable. Corrosivity: Non corrosive. Toxicity: Non toxic. Application: 3-6% in engine & machinery lubricants. Neat for lathe work,tapping etc. Uses: Fuel & Oil Treatments. Product ID: 214. Categories: Fuel & Oil Treatments. | Western Australia |
| Solvent Decarboniser | SOLVENT DECARBONISER - AC635 is a yellow mobile liquid consisting of two phases with a thin top aqueous phase and a bottom solvent phase for soak bath cleaning. It is ideal for use to decarbonise carburettors, automotive engine parts, gears etc where they can be readily left immersed in a solvent bath. AC635 is tipped directly into a suitable metal container without any dilution to act as a bath. The size of the bath is dependent on the number and the size of the parts to be cleaned. Parts must be totally immersed in the AC635 bath. The bath should not be agitated and be positioned in a cool well ventilated area. It is recommended that the parts be pre-cleaned before introducing them into the bath. They should be left soaking until the soils become loosen. The parts are then removed and hosed down with water. The AC635 bath can be used repeatedly until it shows obvious signs of lack of stripping ability. Pack Sizes: 20 Litres. Product ID: AC635. Chemicals By Industry, Workshop. | Australia Wide |
| Tarzan - Plant Based Bitumen & Grease Remover | TARZAN is a NON-HAZARDOUS readily biodegradable, plant based emulsifying liquid cleaner used for the safe & efficient removal of tar, asphalt, bitumen, grease, engine oil, hydraulic fluid, silicones & hydrocarbon road grime from vehicles, as well as equipment or almost any hard surface not harmed by water alone. Ideal for use in all workshops as a spray cleaner for the toughest soils this product picks up where most water based degreasers fail - Finally there is a fully functional & non-hazardous replacement for conventional petrochemical solvent degreasers! TARZAN has a molecular structure that mimics both bitumen and grease except it can be rinsed with water. Once this product has been applied to bitumen, tar, asphalt or grease it will penetrate, bond and suspend the contamination into the product then the mixture can simply wiped clean or can be blasted off with high pressure water. Once in contact with water the emulsion will break upon standing and can be separated off using conventional separation methods. As a superior replacement for water based products and a direct replacement for often dangerous hydrocarbon solvents this product not only speeds up the whole cleaning action, but also it makes it easier and safer. Use as received. Spray or coat (do not atomize) onto contamination; allow product to work for 1 - 10 minutes then, wipe off or blast clean with copious amounts of high pressure water. Heavy asphalt build ups may require agitation or a repeat application/s. Pack Sizes: 5 Litre, 20 Litres. Product ID: AC1234. Chemicals By Industry, Automotive, Chemicals By Industry, Mining, Chemicals By Industry, Workshop. | Australia Wide |
| Triple 2 - AQIS Degreaser | TRIPLE 2 is a NON-HAZARDOUS food area safe, general purpose medium duty, water based alkaline cleaner that contains high levels of detergent and solvency in one product. This product is effective on most mineral soils and deposits and is ideal for for cleaning and degreasing sensitive equipment, floor, walls, pans, vessels, decks, oil rigs, vehicles, containers and engines. TRIPLE 2 is available in large commercial bulk quantities. Use discount code GREASY15% at checkout. Valid until 30/11/2022. TRIPLE 2 is safe on aluminium, steel, acrylic paint, magnesium and most plastics. Containers dilute 1:20 Spray & Wipe Light Cleaning dilute 1:100. Upholstery dilute 1:20 Vehicles dilute 1:10. Vessels dilute 1:10 Vinyl cleaning dilute 20:1. Floor cleaning dilute 1:10 Motor Degreasing dilute 1:1. Rigs dilute 1:10 High pressure washing dilute 1.10. Prepare a diluted solution according to the extent of the contamination. Where possible use warm water as this works best. Apply by foaming unit, ventures, positive displacement pump, high pressure cleaners, mop & bucket, or sprayed directly onto surfaces using trigger sprays. Once applied allow time to dwell before agitating and then rinse off. Pack Sizes: 5 Litre, 20 Litres, 205 Litre Drums, 1000 Litres. Product ID: AC222. Chemicals By Industry, Automotive, Chemicals By Industry, Mining, Chemicals By Industry, Workshop. | Australia Wide |
Our database is helping our users find suppliers everyday.
