Find where to buy products from Australian suppliers, including: distributors, industrial manufacturers, bulk supplies and wholesalers of raw ingredients & finished goods.
Search for products or services, then visit the suppliers website for prices, SDS or more information. You can also view suppliers in NZ, UK or the USA.
| Product | Description | |
|---|---|---|
| Ethyl Silicate 11099-06-2 | Ethyl Silicate - Surface Coatings. SUPPLIERS TO BUSINESS CUSTOMERS ONLY. |  |
| AFAB 30 - Coolant Concentrate | AFAB 30 - COOLANT - Diesel Premix Coolant is a Green coloured ready-to-use anti-freeze anti-boil coolant that contains minimum of 30% ethylene glycol and incorporates virtually non-depleting organic acid corrosion inhibitors (organic additive technology - OAT). This product is silicate free and recommended as coolant for use in ferrous and aluminium alloy petrol powered automotive engines, heavy duty diesel and natural gas, mobile and stationary engines. AFAB 30 COOLANT is compatible with aluminium, copper and brass cooling systems. With the combination of organic carboxylate inhibitors this gives excellent protection against cast iron cylinder liner and block pitting, cavitation, corrosion or electrical erosion. AFAB 30 - COOLANT does not require a top-up charge of Supplemental Coolant Additive (SCA) when filling and is not expected until 72,000 hours of use when used as directed. For heavy duty diesel engine services AFAB 30 - COOLANT can be used, in light duty commercial vehicles for 3 years or 120,000kms, and heavy-duty engines for 600,000kms, 72000hrs or 3.5 years, whichever comes first. Pack Sizes: 20 Litres, 200 Litre, 1000 Litres. Product ID: AC397-30. Chemicals By Industry, Automotive, Chemicals By Industry, Workshop. |  Australia Wide |
| AFAB 50 - HD Coolant Diesel & Petrol | AFAB 50 is a green coloured, premium performance, low silicate, ethylene glycol based coolant, antifreeze and corrosion inhibitor for use in all automotive cooling systems such as those in passenger cars, trucks, busses and equipment. Use as received in clean and good condition cooling systems. Flush system as per manufactures instructions first. Pack Sizes: 5 Litre, 20 Litres. Product ID: AC398. Chemicals By Industry, Automotive, Chemicals By Industry, Marine, Chemicals By Industry, Mining, Chemicals By Industry, Workshop. | Australia Wide |
| AFAB - Coolant Concentrate | AFAB COOLANT CONCENTRATE is a universal hybrid organic acid & ethylene glycol-based coolant, designed for use as an antifreeze and anti-boil coolant concentrate (contains 1045 g/litre 93% ethylene glycol) which is used in radiators. This product incorporates an advanced formula technology with virtually non-depleting organic acid technology (OAT) corrosion inhibitors. AFAB COOLANT CONCENTRATE is compatible with aluminium, copper and brass cooling systems. With the combination of organic carboxylate inhibitors gives an excellent protection against cast iron cylinder liner and block pitting and cavitation, corrosion/erosion. It is silicate free and recommended as coolant for use in ferrous and aluminium alloy petrol powered automotive engines, light and heavy-duty diesel, natural gas, mobile and stationary engines. Recommended for light duty commercial vehicles for 5 years or 200,000Kms at 33% v/v, and heavy-duty engines for 1,000,000Kms, 12000hrs or 6 years at 50% v/v, whichever comes first when good quality water is used. Pack Sizes: 5 Litre, 20 Litres, 205 Litre Drums. Product ID: AC397. Chemicals By Industry, Automotive. | Australia Wide |
| AFAB - Long Life Red Coolant | AFAB LONG LIFE RED COOLANT CONCENTRATE is an extended life ethylene glycol based anti-freeze, anti-boil (AFAB) coolant concentrate with inorganic corrosion inhibitors (OAT). Light duty commercial vehicles for 5 Years or 200,000 at 33% v/v and heavy duty engines for 1,000,0000kms or 6 years at 50% v/v, whichever comes first. It is amine & silicate free and recommended for use in ferrous and aluminium alloy petrol, natural gas, heavy duty US, European and Japanese Diesel mobile and stationary engines. This product should be used as received but can be diluted as per technical advice only. Special additives have been included to provide protection from cylinder pitting from corrosion. Light duty commercial vehicles for 5 Years or 200,000 at 33% v/v and heavy duty engines for 1,000,0000kms or 6 years at 50% v/v, whichever comes first. Always dilute with distilled water according to engine manufacturers recommendations. OEM Service intervals should be maintained under warranty periods and topping up the cooling system should be done with AFAB LONG LIFE RED COOLANT. Meets or is suitable for the following: AS 2108.1:2004 Type A. ASTM D3306, D4656, D4985, D5345, D6210. SAE J1034. CATERPILLAR EC-1. CUMMINS 90 T8 4. DETROIT DIESEL. Ford WSS-M97B44-C. GM 1899M, 6277M. JASO M325 LLC. JIS K2234. Komatsu. Mack RVI. MAN 324. MB 325.3. Mitsubishi ES-X64216. MTU. Perkins. Renault. D & P Scania TI 02-98. Volvo Heavy Truck. Pack Sizes: 20 Litres, 205 Litre Drums, 1000 Litres. Product ID: AC394. Chemicals By Industry, Automotive, Chemicals By Industry, Marine, Chemicals By Industry, Mining, Chemicals By Industry, Workshop. | Australia Wide |
| CB-3046 FLUID | Acts as an anti-frizz agent. It is an optimized blend of silicones, suitable for water based and anhydrous formulations. It provides long-lasting frizz control, ability to maintain style, shine and curl definition. Moreover, it offers heat protection, enhanced hair alignment, natural look and feel and clear formulations. It is cold processed and is suitable for different hair-types. Dow Corning CB-3046 Fluid finds application in formulating leave-in hair products including creams, lotions, cuticle coats, pomades and non-aerosol sprays. Uses: Hair care (Shampoos, Conditioners, Styling). Group: Raw Materials; Silicones. Alternative Name: Dimethicone, Phenyl Trimethicone, Trimethylsiloxysilicate and Dimethiconol. Grade: Cosmetic Ingredients. CAS Number: 9006-65-9 2116-84-9, 56275-01-5, 70131-67-8. Pack Sizes: 250g, 500 grams, 1kg, 5 kgs, 10kg, 20kg. |  Australia & Worldwide |
| COOL PLUS MAX | COOL PLUS MAX DESCRIPTION. COOL PLUS MAX is a superior water based corrosion inhibitor based on Organic Additive Technology (OAT), which is a selectively balanced mixture of organic additives. OAT formulations are longer life products than those based on conventional formulations, making OATs the products of choice for general aftermarket servicing. 1:20 Mixing ratio. COOLPLUS MAX is a phosphate ,amine, nitirite and silicate-free formulation containing a pH-buffered blend of additives known to reduce the corrosion of steel, cast iron, aluminium alloy, brass, copper and solder .... Contains 400g per litre of ethylene glycol as well as a bittering agent at 10ppm. Available in red or green. USE. Add 50ml of COOL PLUS MAX to every 1L of demineralised water or 1L of Cool Plus Max treats 20L of demineralised water. Dilute product before adding to the cooling system. To avoid possible incompatibility problems, do not mix with any other inhibitors or coolants. SAFETY. COOL PLUS MAX contains ethylene glycol and is poisonous if swallowed. Read Material Safety Data Sheet before use. Avoid contact with the skin and eyes. Keep out of reach of children. COOL PLUS MAX. Exceeds the performance requirements of the following standards. ASTM D1384 Corrosion Test for Engine Coolants in Glassware. ASTM D4340 Corrosion of Cast Aluminium Alloys in Engine Coolants under Heat Rejecting Conditions. Australian/New Zealand Standard 2108.1:2004 "Engine Coolants Type A and Type B for Engine Cooling Systems" using 40 ml per litre hard water. Heat-stressed Alloy Corrosion: ASTM D4340. Heat Transfer Corrosion Rate: 0.3 mg/cm2/week. Max allowable corrosion: 1.0 mg/cm2/week. Crevice/pitting Attack: None. Uses: Cooling Systems. Product ID: 447. Categories: Cooling Systems. |  Western Australia |
| COOLTECH | LONG LIFE ANTIFREEZE ANTIBOIL. DESCRIPTION. COOLTECH was designed to generally exceed the broad range of national, international and OEM standards so workshops can SAVE MONEY by having one coolant to do a wide range of vehicles. (Ref Standards list) Cooltech is recommended for all general aftermarket servicing of the trucking, mining, transport and general automotive industries. Mixing ratio 2:1. COOLTECH has a maximum service life of 4 years, 1,000,000km, 12000 hours or whichever comes first in a well maintained engine cooling circuit at 50% v/v. Chemsol advises against indiscriminate mixing of different coolant formulations. Mixing different coolants may cause precipitation of inhibitor components and potentially result in overheating and reduced corrosion protection. COOLTECH provides maximum antifreeze / anitboil protection and provides peak reliability and operation life of the water pump because it is silicate free. It also provides premium cavitation and liner pitting protection maximising protection of all metals commonly found in the engine cooling system. It contains 1010g/L of Mono ethylene Glycol. COOLTECH is a superior general-purpose coolant based on Organic Additive Technology (OAT), which is a selectively balanced mixture of organic additives. ... It is a formulation based on monoethylene glycol and is free of nitrite, phosphate and amine inhibitors. COOLTECH is produced as a green liquid. Bittering agents are deliberately added, to reduce the risk of accidental poisoning by ingestion. COOLTECH provides long life protection against scale, rust and residue build up. It allows maximum fuel economy by performing at the desired engine operation temperature. USE. COOLTECH should be used in conjunction with the recommendation by the vehicle manufacturer. In the absence of such guidance, it should be diluted with good quality water to give solutions in the concentrati | Western Australia |
| INHIBITED PROPYLENE GLYCOL (IPG) | IPG is a hybrid organic acid / propylene glycol - based antifreeze concentrate for use in those cooling systems where the use of ethylene glycol is not desirable (eg food processing, etc.). IPG is an amine, nitrite, phosphate and silicate - free formulation which contains inhibitors to reduce the corrosion of steel, cast iron, aluminium alloy, brass, copper and solder. IPG should be blended with clean good quality water to suit the cooling system requirements, as outlined in the table below: IPG is not classified as hazardous and is biodegradable. IPG should be blended with clean good quality water to suit the cooling system requirements, as outlined in the table below: IPG concentration in the system may be monitored by measuring the refractive index of the coolant, and topped up as required. Suitable biocides may be added to preserve the coolant if needed. To avoid possible incompatibility problems, do not mix with other coolant formulations. Uses: Cooling Systems. Product ID: 192. Categories: Cooling Systems. | Western Australia |
| LUDOX® TMA | LUDOX® TMA is based on the colloidal silica used in the preparation of hydrid colloidal silica - ethyl silicate binders for precision investment casting. It may also be used in applications in which sodium or alkaline components are undesirable, such as catalysts or in formulations containing polar organic solvents. LUDOX® TMA displays a low sodium levels, board pH stability from about pH 4 to10 & slighty acid to neutral pH. LUDOX® TMA is recommeded to use in precision investment casting and ceramic materials used in refractory applications. Please see the specification sheet below and for further details contact our local sales representative today. Group: Specialty chemicals, electronic & specialties, paints & coatings. CAS No. 7631-86-9. Composition: Colloidal Silica. Application: Mining, Others, Ceramics. Function: BINDERS, Other. Physical Form: Liquid. Product Code: PIM000046532. |  Australia |
| ORGANOSILANE VMO | A vinyl-functional coupling agent that promotes adhesion between unsaturated, polyester-type resins or crosslinked polyethylene resins or elastomers and inorganic substrates including fibreglass, silica, silicates, and many metal oxides. Main Uses: Coupling agent. Other Names: Vinyltrimethoxysilane (99%). Cas No. 2768-02-7. Chemical Category: Organosilanes. PACK SIZES AVAILABLE: 190kg Drums |  Australia Wide, offices in Sydney & Melbourne |
| XIAMETER OFS-6697 SILANE | Tetraethyl orthosilicate (TEOS) for the consolidation of construction materials such as stones in buildings or monuments. Group: Specialty chemicals, paints & coatings. CAS No. 78-10-4. Composition: Tetraethyl orthosilicate (TEOS). Application: Construction. Function: Coupling Agents / Chain extenders. Physical Form: Liquid. Recommended Dosage: 70-100%. Certification: AICS. Product Code: PIM000031770. | Australia |
Our database is helping our users find suppliers everyday.
