Find where to buy products from Australian suppliers, including: distributors, industrial manufacturers, bulk supplies and wholesalers of raw ingredients & finished goods.
Search for products or services, then visit the suppliers website for prices, SDS or more information. You can also view suppliers in NZ, UK or the USA.
| Product | Description | |
|---|---|---|
| 3M W-210 CERAMIC MICROSPHERES | 3M W-210. CERAMIC MICROSPHERES are made of alkali alumino silicate ceramic and is one of our smallest high-strength ceramic particles with a typical d90 of 12 microns; it has a controlled particle size distribution. Formulating with these ceramic microspheres allows higher filler loadings while maintaining desired properties such as viscosity control. In addition, these engineered particles are added to many paints and industrial coatings to provide scrub and burnish resistance. Due to their smaller particle size, ceramic microspheres white grade W-210 are typically chosen over other ceramic microspheres for higher gloss formulations. Formulators may be able to extend resin in their formulation by adding 3M ceramic microspheres and potentially reduce cost. Group: Specialty chemicals, paints & coatings. Composition: Alkali Alumino Silicate Ceramic. Application: Architectural and Deco., Can, Coil and Industrial. Physical Form: Nano powder. Product Code: PIM000031764. |  Australia |
| ALBAGEL 4446 (BENTONITE) | Bentonites are used extensively in pharmaceutical products, personal care products and cosmetics. This grade of bentonite is typically water-washed to remove impurities and lower the grit content. High purity bentonites are used in cosmetic preparations as pigment binders and suspending agents. Uses: Thickeners in lotions Creams Liquid facial cleansers Anti dandruff shampoos Body powders Deodorant sprays Deodorant stick. Group: Personal Care; Cosmetic Raw Materials; Clays; Thickener; Absorbent; Filler; Texturizer; Binder. Alternative Name: Bentonite. Grade: Cosmetics. CAS Number: 1302-78-9. Pack Sizes: 250g, 500 grams, 1kg, 5 kgs, 10kg, 20kg. |  Australia & Worldwide |
| ALCOSPERSE 602N | ALCOSPERSE 602N is a liquid acrylate homopolymer with a clear and colourless to slightly amber liquid at 25 degrees with VOC-free and easy to handle. ALCOSPERSE 602N has the ability to provide an excellent dispersion of a wide range of pigments and fillers, deliver outstanding hydrolytic stability, and is compatible with most surfactants. ALCOSPERSE 602N can be used in an all-purpose cleaner, industrial cleaning, automatic dishwashing, car washing, construction, and metal cleaning. Group: Personal care ingredients, homecare & institutional cleaning. CAS No. 9003-4-7. Composition: Synthetic. Application: Dishwashing, Car Care, Institutional Cleaner. Function: Dispersing Agent. Physical Form: Liquid. Product Code: PIM000041080. | Australia |
| ALUMINUM HYDROXIDE AH-1 | Aluminium hydroxide finds use as a fire retardant filler for polymer applications. It is selected for these applications because it is colorless (like most polymers), inexpensive, and has good fire retardant properties. It decomposes at about 180 °C (356 °F), absorbing a considerable amount of heat in the process and giving off water vapour. In addition to behaving as a fire retardant, it is very effective as a smoke suppressant in a wide range of polymers, most especially in polyesters, acrylics, ethylene vinyl acetate, epoxies, PVC and rubber. Group: Specialty chemicals, polymers. CAS No. 21645-51-2. Composition: Alumina Trihydrate / ATH. Application: Masterbatch & Compounders. Function: ADDITIVESFlame retardants. Physical Form: Nano powder. Product Code: PIM000086960. | Australia |
| ATH | ATH is a fire retadant. It's white and innocuous. Uses: Fire retardant and white filler. Group: Chemicals. Alternative Names: ATH, aluminium hydroxide, aluminium trihydrate. CAS No. 21645-51-2. |  Australia and New Zealand |
| AVANSTEEL 80-90 | AVANSTEEL 80-90 is a filler that allows to increase the density of plastics. The density is around 7 g/l and its colour is grey. Valid for uses in FDA and EU-regulation (10/2011). Group: Specialty chemicals, polymers. Composition: Application: Masterbatch & Compounders. Function: Antistatic additives. Physical Form: Dispersion. Product Code: PIM000007249. | Australia |
| AXEL INT-35 UDH | A process aid additive with anti-static properties which is incorporated directly into the resin. Eliminates the need for an external mould release agents. Improves resin flow, improves dispersion of other resin additives (reinforcements, fillers, and pigm Main Uses: Process aid. Other Names: Proprietary synergistic blend of organic fatty amides and glycerides. Cas No. Proprietary. Chemical Category: Process Aids. PACK SIZES AVAILABLE: 25kg Box |  Australia Wide, offices in Sydney & Melbourne |
| AXEL INT-38 HM | A process aid additive with anti-static properties which is incorporated directly into the resin. Improves resin flow/fill, improves dispersion of other resin additives (reinforcements, fillers, and pigments), shortens cycle times, reduces temperatures an Main Uses: Process aid. Other Names: Proprietary synergistic blend of organic fatty acids, esters, and glycerides. Cas No. Proprietary. Chemical Category: Process Aids. PACK SIZES AVAILABLE: 25kg Cartons | Australia Wide, offices in Sydney & Melbourne |
| Calcium Carbonate | Calcium Carbonate. Group: Construction / concrete admixture / filler materials. Categories: aragonite; calcium carbonate. |  |
| CALCIUM CHLORIDE DIHYDRATE | CALCIUM CHLORIDE DIHYDRATE excipient relate to its dehydrating properties and it has been used as an antimicrobial preservative, as desiccant. It can be used to treat hypocalcemia. Group: Pharmaceutical ingredients, excipients. CAS No. 10035-04-8. Composition: > 60% Calcium Chloride Dihydrate. Application: Oral, Tablets, Pellets, Powder. Function: Filler. Physical Form: Powder. Certification: EP. Product Code: PIM000009490. | Australia |
| CALCIUM PHOSPHATE DIBASIC | CALCIUM PHOSPHATE DIBASIC Dihydrate (not anhydrous) : Used as an excipient as a source of calcium and phosphorous in nutritional/dietary supplements.It is used particularly in the nutrition/health food sectors(prepared breakfast,dog treats,enriched flour,etc). This item in used in toothpaste and dentifrice formulations for its abrasive properties. Group: Pharmaceutical ingredients, excipients. CAS No. 7789-77-7. Composition: Dibasic Calcium Phosphate. Application: Oral, Tablets, Pellets, Powder. Function: Filler. Physical Form: Powder. Certification: EP. Product Code: PIM000009493. | Australia |
| CALCIUM SULPHATE DIHYDRATE | CALCIUM SULPHATE DIHYDRATE is source of calcium in food supplements. Used as pH regulator, hardness regulator, yeast agent, nutritional supplement, texture and flavor enhancer in food production. Human studies indicate that the bioavailability of calcium from calcium sulphate in mineral waters is comparable to that from milk. Group: Pharmaceutical ingredients, nutraceuticals. CAS No. 10101-41-4. Composition: Calcium Sulphate Dihydrate. Application: Oral, Tablets, Pellets, Powder. Function: Filler. Physical Form: Powder. Product Code: PIM000009495. | Australia |
| Calcium Sulphate (Gypsum) | Calcium Sulphate, also known as Gypsum, has applications as a mineral filler, in agriculture, in food and many other industries. Grades: Britefil fine and Superfine. Pack Sizes: MOQ is 1 pallet/1mt - We don't supply in a small quantities. Norkem your first link in the chemical chain. |  Australia |
| Cenospheres | Cenospheres. Group: Construction / concrete admixture / filler materials. construction / dry-mix / filler materials. construction / gfrc (glass fiber reinforced concrete) / filler materials. oil & gas industry / additives for cementing. oil & gas industry / additives for drilling and fluid loss. | |
| CEOLUS KG-1000 | CEOLUS is a range of microscrystalline cellulose products used as compression excipients. Ceolus products facilitate powder or microgranule compression, even at low concentrations in excipients. They also prevent capping during the compression phase. It facilitates high-dose formulation, low compactibility drug tableting and reduced tablet size. Group: Pharmaceutical ingredients, excipients. CAS No. 9004- 34- 6. Composition: Microcrystalline Cellulose. Application: Tablets, Capsules, Granules, Pellets. Function: Filler, Disintegrant, Binder. Physical Form: Powder. Product Code: PIM000025403. | Australia |
| collagen powder bovine hydrolysate protein peptide all sizes | Orku Bovine Collagen Hydrolysate is a bioactive peptide protein that supports the body's own collagen found in bones, joints, skin, hair, and nails. Our collagen is composed of type I and type III collagen and is hydrolysed through an exclusive enzyme process, allowing quick absorption, within 30 minutes. Collagen is the most plentiful protein in the body, vital for tissue repair, reinforcing bones, enhancing healthy skin elasticity, and stimulating cell production. Plus, extra collagen has benefits beyond the skin that can benefit your joints, muscles, and nails. It contains more than 20 amino acids, mostly glycine, lysine, proline, and hydroxyproline, as well as 8 essential amino acids for the growth and repair of muscle tissue. Features include 100% Bovine Collagen Powder with no buffers or fillers, type I and III great for the health and repair of soft tissues within the body, great for the ligaments and tendons, molecular weight between 500-10,000 Da supporting rapid absorption and bioavailability, rich in hydroxyproline crucial for collagen synthesis and skin health, 94% protein content for assisting muscle growth, strengthening bones, and repairing tissues, low ash content and moisture content ensuring a high-purity product, dairy free and contains no fat, sugar or carbohydrates, pure and untouched with no fillers, preservatives or flavourings, gluten free, and sourced f |  |
| CYASORB® UV-3529 | CYASORB® UV-3529 is a polymer additive, that appears in a off white pastille. CYASORB® UV-3529 offers the benfits for oligomeric HALS for long term UV and thermal protection of polymers, lower inter-reactivity with fillers, pigments and other additives (3° amine), low color contribution and highly resistant to discoloration and gas fading & very low in volatility and compatible with most polymers. CYASORB® UV-3529 is suitable to use in Polyolefins, Polyamides, Styrenics, Polyesters, PVC, Acrylics & Polyurethanes applications. Please see the specification sheet below and for further details contact our local sales representative today. Group: Specialty chemicals, polymers. Composition: Hindered Amine Light Stabilizer. Application: Rubber & Elastomers, Thermoplastic Transformers. Function: UV Absorbers, POLYMERS, Polyolefins. Physical Form: Solid. Product Code: PIM000042659. | Australia |
| Dewaxed White Shellac | Natural shellac is bleached and the wax completely removed. Dewaxed white shellac is in powder form and can be used as a sanding sealer, wood grain filler, near clear french polish and food coating applications. Uses: Wood work, luthiers, food coating, sanding sealer. Pack Sizes: 25kgs, 1kg, 250gm. Categories: Shellac, Resin glaze and wood finishes. |  AUSTRALIA, NEW ZEALAND |
| DISODIUM PHOSPHATE ANHYDROUS | DISODIUM PHOSPHATE ANHYDROUS functions as an emulsifier, stabilizer and texturizer; it also is a buffering agent, and chelating agent especially for the calcium in milk products. As a food additive, dipotassium phosphate is used in imitation dairy creamers, dry powder beverages, mineral supplements, and starter cultures. Group: Pharmaceutical ingredients, nutraceuticals. CAS No. 7558-79-4. Composition: Disodium Phosphate Anhydrous. Application: Oral, Tablets, Pellets, Powder. Function: Filler. Physical Form: Powder. Product Code: PIM000009521. | Australia |
| DISODIUM PHOSPHATE DODECAHYDRATE | DISODIUM PHOSPHATE DODECAHYDRATE is a food and pharmaceutical additive. In food technology it is used as a complexing agent and acidity regulator. Group: Pharmaceutical ingredients, excipients. CAS No. 10039-32-4. Composition: Disodium phosphate dodecahydrate. Application: Oral, Tablets, Pellets, Powder. Function: Filler. Physical Form: Powder. Certification: USP/NF, EP. Product Code: PIM000009522. | Australia |
| Diutan gum | Diutan gum is an extraordinarily powerful low shear viscosity modifier. Uses: Diutan gum is used in water borne systems to stop the settling out of filler. Group: Chemicals. Molecular formula: Diutan gum is a superior low shear vicscosity modifier to xanthan, welan and guar. | Australia and New Zealand |
| DMSO Liquid Dimethyl Sulfoxide 99.9% Pure Pharmaceutical Grade Solvent Bulk Size | 99.9% Pure pharmaceutical Grade DMSO, also known as Dimethyl Sulfoxide. DMSO, or dimethyl sulfoxide, is derived from Pine trees as a by product of the paper manufacturing industry. It is also naturally found in garlic as one of the roots 70+ sulfur compounds. It has long been used as a chemical solvent and chemical intermediate for: Non-industrial use, including in pesticides and fungicides, veterinary medicines; and for cosmetic use. Domestic use, including in coatings, paints, lacquers and varnishes, paint and varnish removers; cleaning products; ink and toners; fillers, putties, plasters and modelling clay; and polishes and wax blends. Commercial use, including in: anti-freeze and de-icing products; adhesives and sealants; hydraulic fluids and construction material. Specifications. Pharmaceutical Grade. Appearance: Colourless, transparent liquid. Other Names: DMSO; Methane, Sulfinylbis. Crystalline Point: 18.3?C. Assay / Purity: 99.9 %. Chemical Formula: C2H6OS. DMSO is a very temperature sensitive product. Liquid DMSO can and will crystallise in a cold environment. If this occurs, place or keep the DMSO bottle in a warm location (15°C - 20°C), and within a few hours it should go back to liquid form. For faster results, place the bottle in a clean zip lock bag, seal it, and place it in warm water. Under any circumstances, do not microwave it! Pack Sizes: | |
| DOWSIL 902H ADDITIVE | DOWSIL 902H ADDITIVE is a 50% active non-ionic silicone resin emulsion that offer excellent water repellency. DOWSIL 902H ADDITIVE display the benefits in enhancing beading and hydrophobing effect, provides the a good binding properties for filler and pigments. DOWSIL 902H ADDITIVE is commonly used in architectural coating applications. Group: Specialty chemicals, paints & coatings. Composition: Mixture. Application: Architectural and Deco. Function: ADDITIVES, Other. Physical Form: Liquid. Product Code: PIM000043037. | Australia |
| DOWSIL GP SHP 60 PLUS | DOWSIL GP SHP 60 PLUS is a free-flowing powder designed to improve hydrophobic performance for cementitious dry-mix powder applications. DOWSIL GP SHP 60 PLUS display the features and benfits of aasy to disperse in water, easy to mix in powered composition, prevents efflorescence aesthetical problems by reducing the transport of water-soluble salts and makes cement-based materials more hydrophobic. DOWSIL GP SHP 60 PLUS is mostly commonly used in cement-based compositions and used to reduce the capillary movement of liquid water in grouts, joint fillers, mortar, EIFS, stucco, and facade-render. Group: Specialty chemicals, paints & coatings. Composition: Silane/resin based. Application: Construction. Function: Water Repellents. Physical Form: Liquid. Recommended Dosage: 0.1-0.5%. Product Code: PIM000004139. | Australia |
| Dry & Shine - Rinse Aid | DRY & SHINE Machine Rinse Aid is an environmentally responsible automatic machine dishwashing rinse aid that is readily bio-degradable with no fillers or phosphates. DRY & SHINE has a place beside every automatic dishwashing machine where hand drying dishes, crockery and cutlery is prohibitive. Automatically dispensed into the final rinse cycle to rapidly dry and leave no streaks. Saves time and labour and keeps the crew happy with a shiny plates and cutlery. NOTE: For machines that do not have hot water sanitising we recommend the use of SANI DRY as a substitute to DRY & SHINE because SANI DRY contains an added leave-on-sanitizer. NOTE: For glassware washing on dedicated glass washing machine use SPARKLE. Dilution Recommendations. Use as received through automatic dosing pump. Flow rate of the rinse cycle water should be check and dose rate set on the unit accordingly. This product may also be manually dispensed into domestic dishwashing rinse reservoirs at machine manufacturers dosage recommendations. Pack Sizes: 5 Litre, 20 Litres. Product ID: WC450. Chemicals By Industry, Hospitality, Chemicals By Industry, Kitchen. |  Australia Wide |
| E-Glass Fibers | E-Glass Fibers. Group: Construction / concrete admixture / fibers. construction / dry-mix / fibers. construction / gfrc (glass fiber reinforced concrete) / fibers. construction / gypsum-board, plasterboard and drywall / plaster compound additives. construction / sewer rehabilitation / fibers. construction / gypsum-board, plasterboard and drywall / filler materials. | |
| EPOXY RESIN YN-1828 | YN-1828 is a medium viscosity liquid epoxy resin (11-15 Pa.s) and It contains no diluents. YN1828 provides good pigment wetting and good resistance to filler settling and a high level of mechanical and chemical resistance properties in the cured state. However, as an unmodified pure bisphenol A resin, YN1828 is prone to crystallize on storage, particularly in cold conditions. Group: Specialty chemicals, paints & coatings, polymers. CAS No. 25068-38-6. Composition: 4'-Isopropylidenediphenol, oligomeric reaction products with 1-chloro-2, 3-epoxypropane. Application: Adhesives & Sealants, Architectural and Deco., Can, Coil and Industrial, Construction. Function: Epoxy Resins. Physical Form: Liquid. Product Code: PIM000023379. | Australia |
| Expanded Glass Spheres | Expanded glass spheres - Bisley Extrema-Spheres are small porous granules made of a white inorganic thermal insulating material which comes from recycled glass. They are fire-resistant/non-combustable, moisture resistant, durable, chemically and biologically stable and have a low-thermal conductivity coefficient. They allow for construction in difficult conditions (e.g. on weak soil and in extreme weather changes), construction for thin and non-standard structures, 30% lower heating costs, noise insulation and have no adverse health impacts. Uses: Extrema-spheres are widely used in many applications due to the extensive range of grain sizes. They are used in construction as a loose thermal insulating material, specifically for plasters and dry mixtures, lightweight concrete, lightweight panels, polymer concrete, can assist with achieving higher film builds and 3D printing. They are also used is applications with specific requirements, for example biological and chemical resistance, flammability, food safety and agriculture safety. Extrema-spheres are available in grades 0.1-0.3, 0.25-0.5, 0.5-1, 1-2, 2-4, 4-8 mm. Group: GFRC, functional fillers. Pack Sizes: 50 L small bags, 100 L small bags, 1.5 cubic metre big bags or in bulk on a 56 m3 silo truck. Trading Locations; Sydney, Houston, Dubai, Jakarta, Ho Chi Minh City, Bangkok, Kuala Lumpur and Singapore. |  |
| Expanded Glass Spheres | Expanded Glass Spheres. Group: Construction / gypsum-board, plasterboard and drywall / filler materials. construction / ready-mix / filler materials. | |
| FENTAMINE NMEA | FENTAMINE NMEA is a versatile and effective emulsifier that is designed for a wide range of industrial applications. It is a highly stable, anionic emulsifier that can be used in various types of formulation, it is known for its excellent stability and compatibility with various raw materials, making it an ideal choice for many different applications. The key benefit of FENTAMINE NMEA is its ability to produce stable emulsions with exceptional particle size control. This means that formulations made with this emulsifier will have consistent performance and appearance, even after long periods of storage. It also offers excellent wetting and dispersing properties, making it ideal for use in pigments, fillers, and other additives. Group: Personal care ingredients, homecare & institutional cleaning. CAS No. 109-83-1. Composition: Synthetic. Application: Fabric care. Function: Emulsifier. Physical Form: Liquid. INCI Name: 2-Methylaminoethanol. Product Code: PIM000058138. | Australia |
| FINNTALC M04SLC | FINNTALC M04SLC is a high-quality talc product that undergoes a rigorous purification process through multiple flotation cells, resulting in a precisely defined talc composition. This natural product closely resembles a synthetic chemical, guaranteeing excellent reproducibility in various formulations. It finds applications in plastics for antiblock, automotive cabin, foam, film, nucleation, packaging, sheets, and engineered plastics, as well as in paints and coatings for partial TiO2 replacement, thin layer architectural and industrial coatings, tinting pastes, and inks. Group: Specialty chemicals, paints & coatings. CAS No. 14807-96-6. Composition: Hydrated magnesium silicate. Application: Architectural and Deco. Function: PIGMENTSOpacifier - Filler. Physical Form: Micronized Powder. Product Code: PIM000077152. | Australia |
| Glass Fibres (Fiberglass Reinforcing Materials) | Glass Fibres are available as chopped fibres, woven fabrics, rovings and strand mats - Fibreglass is highly compatible with reinforced unsaturated polyester, vinyl ester resin, and polyurethane resin materials. It is a crucial component for spray-up applications and other processes in the fabication of fibeglass articles. Uses: swiming pools, trucks and caravan parts, shower booths, pultrusion processes, pipes, tanks, etc. Group: GFRC, functional fillers and IC&M Composites. | |
| gumby gumby powder gumbi aboriginal plant pittosporum angustifolum | Orku Gumby Gumby powder is made from hand-selected leaves and green twigs of only the youngest shoots of healthy Gumby Gumby trees. The leaves and twigs are washed, dried in a UV-protected cooling shed, and milled in a process that preserves the integrity of the powder to ensure it retains all 40 elements and maximum potency. Features include being made from the Pittosporum Angustifolium tree, selected from the healthiest Gumby Gumby trees, and consisting of 100% pure Gumby Gumby leaves and twigs with no fillers or bulking agents. The product is processed to preserve the beneficial elements and maximum potency of the plant, comes in a resealable bag for freshness, and can be added to recipes or packed in capsules for easy dosage. Pack Sizes: 100g, 400g, 1Kg, 2Kg, 5Kg, 10Kg, 20Kg. Product ID: 1G_GUMBY_POWDER. | |
| Hollow Borosilicate Glass (Microspheres) | Hollow Borosilicate Glass (Microspheres). Group: Construction / gypsum-board, plasterboard and drywall / filler materials. | |
| HYDRODIS® RB 4385 | HYDRODIS® RB 4385 is a polynaphthalene sulphonates salts are stabilizers for latex (from natural or synthetic rubber) and act as dispersants of pigments and fillers used in the curing processes. They permit the addition of electrolytes during polymerization process (essential to control the viscosity) without subsequent instability during the reaction. Group: Specialty chemicals, polymers. CAS No. 9084-6-4. Composition: Sodium naphthalene sulfonate condensate. Application: Polymer Producers, Rubber & Elastomers. Function: Dispersing Agents. Physical Form: Micronized Powder. Product Code: PIM000011629. | Australia |
| KH-69 LIQUID SILANE | A bi-functional polysulfidic organosilane for the rubber industry. Used to improve the reinforcing capability of fillers with a silanol group on their surface, and also as an integral part of curing systems to improve crosslinking network properties. The Main Uses: Coupling agent. Other Names: Bis (3-triethoxysilylpropyl) tetrasulfide. Cas No. 40372-72-3. Chemical Category: Organosilanes. PACK SIZES AVAILABLE: 25kg Pail | Australia Wide, offices in Sydney & Melbourne |
| KRONOS® 2044 | KRONOS® 2044 is a treated Rutile for systems with high filler load. Group: Specialty chemicals, paints & coatings. CAS No. 13463-67-7. Composition: TiO2 Rutile SP. Application: Printing Inks, Architectural and Deco., Fibers, Textiles & Films. Function: TiO2. Physical Form: Micronized Powder. Product Code: PIM000002071. | Australia |
| LUDOX® AS-40 | LUDOX AS-40 is a low density, colloidal silica used as a filler in coating applications. It is an aqueous colloidal dispersion containing 40% synthetic amorphous silica of nominal 22 nanometer particle size. It has negative surface charge and is stabilized with ammonium hydroxide. It has low sodium level, an overall negative particle charge, good binding strength and stability in most applications. Group: Specialty chemicals, paints & coatings. Composition: Alkaline 40%. Application: CanCoil and Industrial. Physical Form: Liquid. Product Code: PIM000032185. | Australia |
| LUNA-SIL SI69 | LUNA-SIL SI69 is a silane coupling agent that is most commonly used in the rubber industry as a coupling agent. Use of LUNA-SIL SI69 will increase the modulus and tensile strength of the rubber, as well as reducing viscosity, which saves on energy consumption. LUNA-SIL SI69 can be used to incorporate fillers such as silicas, silicates and clays into polymers ranging from NR, EPDM, BSR and NBR. Group: Specialty chemicals, polymers. CAS No. 40372-72-3. Application: Rubber & Elastomers. Function: POLYMERS, NBR. Physical Form: Liquid. Product Code: PIM000053741. | Australia |
| MAGNESIUM CARBONATE LIGHT | MAGNESIUM CARBONATE LIGHT BP can be used as a mineral supplement to prevent and treat low amounts of magnesium in the blood. High purity magnesium carbonate is used as antacid and laxative and as a binding agent and filler for tablet preparation and the production of pharmaceutical magnesium derivatives. It is extensively used for surgical glows, condoms and other Latex Rubber products. Mineral Magnesium Supplement in nutritional and energy drinks. Group: Pharmaceutical ingredients, nutraceuticals. CAS No. 39409-82-0. Composition: Magnesium Carbonate. Application: Oral, Tablets, Pellets, Powder. Function: Minerals and nutrients. Physical Form: Powder. Certification: EP. Product Code: PIM000009569. | Australia |
| Magnesium Oxide | Magnesium Oxide. Group: Oil & gas industry / additives for drilling and fluid loss. oil & gas industry / additives for cementing. construction / dry-mix / filler materials. construction / gunite and shotcrete / shotcrete additives. construction / gunite and shotcrete / gunite additives. Categories: oxomagnesium; magnesia. | |
| MAIZE STARCH POWDER | MAIZE STARCH POWDER BP is one of the most reliable excipients produced from white maize (corn). Excellent excipient as binder and filler for tablets and capsules. It participates in Maillards reaction in presence of proteins. Group: Pharmaceutical ingredients, excipients. CAS No. 9005-25-8. Composition: > = 88 % Starch. Application: Oral, Tablets, Pellets, Powder. Function: Binder, Filler. Physical Form: Powder. Product Code: PIM000009574. | Australia |
| MALDEX MALTODEXTRIN | MALDEX MALTODEXTRIN is generally used as a thickener or filler to increase the volume of a processed food. It's useful for thickening products such as instant pudding and gelatins, sauces, and salad dressings. Various grades available. Group: Food & beverage ingredients, confectionery & bakery, processed food & food service, food supplements & nutrition, beverage & dairy. Composition: Maltodextrin. Application: Sauces, Soup, Processed Food, Meat Products, Bread, Cakes & Pastries, Frozen Dough. Function: Stabilizer & Thickener. Physical Form: Powder. Certification: Halal, JAKIM, MUI, Kosher, FSSC. Product Code: PIM000012895. | Australia |
| MALTODEXTRIN DE 18-20 | MALTODEXTRIN DE 18-20 provides excipient benefits as a filler and filler/binder while also providing nutrient benefits as a carbohydrate source. This is a slightly hydroscopic, fine, white powder produced by spray drying partially hydrolised food grade maize starch. Maltodextrin is used in solid dosage forms, direct compression, wet and dry granulation, capsules and powders, Liquid dosage forms, syrups, solutions, suspensions, Medicated confectionery, hard boiled candies gums, chewing gum. Used in dry mix beverage powders, low calorie foods and beverages, spray dried flavors, spices, colors, fabricated foods and beverages. Group: Pharmaceutical ingredients, excipients. CAS No. 9050-36-6. Composition: >=96% Maltodextrin. Application: Oral, Tablets, Pellets, Powder. Function: Binder, Filler. Physical Form: Powder. Certification: USP/NF, EP. Product Code: PIM000009576. | Australia |
| MICROCRYSTALLINE CELLULOSE (MCC) 101 | Microcrystalline cellulose (MCC) 101 is fine standard MCC grade, especially suited for wet granulation, roller compaction and spheronization, very high compactability (Bulk density 0.26 - 0.33g/ml). Group: Pharmaceutical ingredients, excipients. CAS No. 9004-34-6. Composition: Microcrystalline Cellulose. Application: Oral, Tablets, Pellets, Powder. Function: Binder, Disintegrant, Filler. Physical Form: Powder. Certification: USP/NF, EP. Product Code: PIM000009583. | Australia |
| MICROCRYSTALLINE CELLULOSE (MCC) 102 | Microcrystalline cellulose (MCC) 102 grade, odorless, tasteless, white powder derived from highly purified wood pulp. With a wide range of chemical technical ansd economic benefit, MCC is one of the most widely used binder excipients for solid dosage forms. Flocel 102 is a medium size standard MCC grade, suited for the majority of directly compressible actives. It combines good flow and high compactability. It has the benefits of robust tablets with low friability, high production yields, practically inert, created from sustainable organic materials, contains no additives & impurities. Group: Pharmaceutical ingredients, excipients. CAS No. 9004-34-6. Composition: Microcrystalline Cellulose. Application: Oral, Tablets, Pellets, Powder. Function: Binder, Disintegrant, Filler. Physical Form: Powder. Certification: USP/NF, EP. Product Code: PIM000009584. | Australia |
| Microspheres | Microspheres. Group: Construction / concrete admixture / filler materials. construction / dry-mix / filler materials. construction / gfrc (glass fiber reinforced concrete) / filler materials. | |
| MONTANOV 202 | It acts as o/w emulsifier of natural origin, for lotion to thick textures with a light feel. As a liquid crystal promoter, it helps prolong the moisturizing effect. It has restructuring property. It is preservative-free and synthesis without solvent. It has excellent compatibility with the fillers and pigments used in make-up. It is used in all types of skincare, foundation, hair coloration, oily skin formulas for men. Uses: Decorative cosmetics/Make-up - (Foundations Foams; Sprays, Concealers creams; Fluids); Hair care (Shampoos, Conditioners, Styling) - (Bleaches, Dyes; Colors products; Skin care (Facial care, Facial cleansing, Body care, Baby care). Group: Raw Materials; Emulsifiers; Moisturizing Agents; Softner. Alternative Name: Arachidyl Alcohol, Behenyl Alcohol, Arachidyl Glucoside. Grade: Cosmetics. Pack Sizes: 250g, 500 grams, 1kg, 5 kgs, 10kg, 20kg. | Australia & Worldwide |
| Organic Potassium Bicarbonate Powder - Food Grade FCC for Brewing Baking Bulk | Potassium Bicarbonate has been used over the centuries for numerous household and health reasons. Some common uses include leavening in baking, for winemaking, in soda water, and as an effective fire retardant as well. Some have used Potassium Bicarbonate as a fungicide, vegetable wash, and is accepted for safe use in Organic Farming. This ingredient may be added to foods and beverages or smoothies and green drinks. It is a pure white granular powder and has no fillers or binders, additives or preservatives. This product is FCC grade as it meets the requirements of the Food Chemical Codex indicates and is suitable for all food, beverage and nutritional supplement applications. Suggested Uses of Potassium Bicarbonate. Organic Fungicide. Potassium Bicarbonate is used as an organic fungicide. It works as a contact fungicide inhibiting the fungus mycelium development and increasing the pH to control fungus in crops. It considered a safe and non toxic fungicide for use in organic crop production. Fire Extinguisher. Potassium Bicarbonate performs well as a fire extinguisher and is a common ingredient in powdered fire extinguishers. The slightly basic nature of potassium bicarbonate helps neutralise chemical fires and smothers the combusting material to put out the flames. Neutralise Acidic Soil. Potassium Bicarbonate is used widely in agriculture as a soil neutralise | |
| Orgasol® 2002 EXD NAT COS | Orgasol® 2002 EXD NAT COS is part of the Orgasol® 2002 SERIES. It contains polyamide round particles characterized by ultra precise size distribution and a native micro-porosity. Thanks to the unique patented technology, the particle size and the porosity are fine tuned to build a range of products that covers various formulation needs. Their lipophilic structure offers high compatibility. with the stratum corneum as well as long wear at the skin surface. Their polyamide lubricity produces a unique velvet feel. Group: Personal care ingredients, cosmetics & toiletries. Composition: Nylon 12. Application: Sun Care, Skin Care. Function: Filler, Skin Sensory Additive. Physical Form: Powder. Recommended Dosage: 1-20%. Certification: Halal. INCI Name: Nylon 12. Product Code: PIM000008990. | Australia |
| Orgasol® 4000 EXD NAT COS CARESSE | Orgasol® 4000 EXD NAT COS CARESSE is one of Arkema's patented round shape polyamide powders. These are characterized by ultra-precise particle size distribution and native micro-porosity. Their lipophilic structure offers high compatibility with the stratum corneum as well as long wear on the skin's surface. Their polyamide lubricity produces a unique velvet feel. Group: Personal care ingredients, cosmetics & toiletries. Composition: Nylon 6/12, Nylon 15. Application: Sun Care, Skin Care. Function: Filler, Skin Sensory Additive. Physical Form: Powder. Recommended Dosage: 1-20%. Certification: Halal. INCI Name: Nylon 6/12. Product Code: PIM000008992. | Australia |
| PP Fibers (Polypropylene Fibers) | PP Fibers (Polypropylene Fibers). Group: Construction / concrete admixture / fibers. construction / dry-mix / fibers. construction / gfrc (glass fiber reinforced concrete) / fibers. construction / gypsum-board, plasterboard and drywall / plaster compound additives. construction / gunite and shotcrete / gunite additives. construction / gunite and shotcrete / shotcrete additives. construction / ready-mix / filler materials. construction / sewer rehabilitation / fibers. | |
| PRECARB 100 | PRECARB 100 is a plastic & elastomers filler and extender additives. PRECARB 100 is capable for a high degree of chemical purity, high level of whiteness and opacity, exactly defined crystal structures & exceptional fineness, and close particle size distribution. PRECARB 100 is a great cost-effective, odorless, & good surface finish and gloss solution. PRECARB 100 is suitable for dispersion paints, printing inks, Rigid PVC/ window profiles, paper pulp, specialty papers, transportation industry, building industry/construction & sealants, and adhesives. Group: Specialty chemicals, paints & coatings. CAS No. 471-34-1. Composition: Carbonic Acid & Calcium Salt. Application: Printing Inks, Adhesives & Sealants. Function: ADDITIVES, Other. Physical Form: Nano powder. Product Code: PIM000034638. | Australia |
| PREGEL STARCH | PREGEL STARCH - Corn starch and Pregelatinized starch can be used in tablet and capsules to improve flowability, enhance disintegration and improve hardness. It can be as free flowing low dust excipient with disintegration and dissolution properties independent of medium pH, which helps promote deagreggatioon of the powder mass into primary drug particles and speeds up the dissolution rate of the drug substance, providing rapid disintegration across the pH range present in the human digestive track. Pregel starch acts as a compression aid, diluent and disintegrant, which allows for robust but simple capsule and directly compressible tablet formulations. Group: Pharmaceutical ingredients, excipients. CAS No. 9005-25-8. Composition: > = 88 % Starch. Application: Oral, Tablets, Pellets, Powder. Function: Binder, Filler. Physical Form: Powder. Product Code: PIM000009603. | Australia |
| PURITY 21C | Very white, unmodified corn starch. Has applications whenever a starch with high whiteness and free flowing properties are required. Used in talc replacement, loose and pressed powders, antiperspirants, deodorants, binder and filler for pharmaceutical tablets and preparations. Uses: Skin care (Facial care, Facial cleansing, Body care, Baby care) Toiletries (Shower, Bath, Oral care, Antiperspirants, deodorants). Group: Personal Care; Cosmetic Raw Materials;Cosmetic Raw Materials/Powders. Alternative Name: Zea Mays (Corn) Starch. Grade: Cosmetic Ingredients. CAS Number: 9005-25-8. Pack Sizes: 1kg, 5 kgs, 10kg, 20kg. | Australia & Worldwide |
| Redispersable Polymers (RDP) | Redispersible polymers (RDP) are powders manufactured from the spray drying of emulsion polymers based on ethylene (E), vinyl acetate (AC), acrylic (Ac) and/or Veova monomers. Bisley Redispersible Polymers powders act as organic binders and are commonly used in combination with cement, calcium sulfate, and calcium hydroxide. This range is based upon select standard and premium emulsions. In drymix cement based mortars, they imporve the adhesion strength, abrasion resistance, cohesive strength of the mortar, deformation/flexibility, flexural strength, and durability. They are commonly used in ceramic tile adhesives (CTA), tile grouts, self leveling compounds (SLC), renders, skim coats, gypsum plaster, repair mortars, RDP Based WPM, gypsum joint fillers, gypsum blocks, ETICS/EIFS, and others. Trading Locations; Sydney, Houston, Dubai, Jakarta, Ho Chi Minh City, Bangkok, Kuala Lumpur and Singapore. | |
| Silaplane FM-0411P | Silaplane FM-04 series, including Silaplane FM-0411P with a Molecular Weight (Mn) of 1000, can react with urethane resins and polyesters to impart the excellent properties of silicone to various organic resins. As a result, Silaplane can be used as a raw material for polymers, filler dispersants, and surface treatment agents. Group: Specialty chemicals, electronic & specialties, paints & coatings, polymers. CAS No. 207308-30-3, 191920-47-5. Composition: Reactive silicone. Application: Adhesives & Sealants, Architectural and Deco., Automotive Paints, Construction, Electronic Chemicals, Fibers, Textiles & Films, Lamination and Converting, Masterbatch & Compounders, Polymer Producers, Powder Coating, Printing Inks, Rubber & Elastomers, Thermosets & Composites, Thermoplastic Transformers. Function: Adhesion Promoters, Anti-Graffiti, Antiscratch, Coupling Agents / Chain extenders, Dispersing Agents, Intermediates & Accelerators, Optical Materials, Other, Reagents, Rheology Modifiers, Semiconductor Materials, Surface Modifiers - Defoamers, Water Repellents, Acrylic Dispersions, Acrylic Emulsions, Acrylic Resins, Amino - Melamine - Urea Resins, Epoxy Resins, Phenolic Resins, Polyamide, Polyisocyanates, Polyurethane / Polyaspartics, Polyurethane Dispersions, Redispersable Powder, SBR Emulsions, Silane Terminated Polyethers, Silicone Resins, Styrene-Acrylic Dispersions, UV Binders and Oligomers, Vinyl Resins, Complex Inorganic Pigments, Functional Dyes, Iron Oxide, TiO2 (Titanium Dioxide), POLYMERS, Polymer Producers/Rheology modifier, SBR, Silicone Rubber, TPU, Raw Material for Electronics. Physical Form: Liquid. Recommended Dosage: 0.1-10% (Often in the range of 0.5-3%.). Certification: NDSL, ENCS. Product Code: PIM000088302. | Australia |
| Silaplane FM-0421 | Silaplane FM-04 series, including Silaplane FM-0421 with a Molecular Weight (Mn) of 5000, can react with urethane resins and polyesters to impart the excellent properties of silicone to various organic resins. As a result, Silaplane can be used as a raw material for polymers, filler dispersants, and surface treatment agents. Group: Specialty chemicals, electronic & specialties, paints & coatings, polymers. CAS No. 207308-30-3, 191920-47-5. Composition: Reactive silicone. Application: Adhesives & Sealants, Architectural and Deco., Automotive Paints, Construction, Electronic Chemicals, Fibers, Textiles & Films, Lamination and Converting, Masterbatch & Compounders, Polymer Producers, Powder Coating, Printing Inks, Rubber & Elastomers, Thermosets & Composites, Thermoplastic Transformers. Function: Adhesion Promoters, Anti-Graffiti, Antiscratch, Coupling Agents / Chain extenders, Dispersing Agents, Intermediates & Accelerators, Optical Materials, Other, Reagents, Rheology Modifiers, Semiconductor Materials, Surface Modifiers - Defoamers, Water Repellents, Acrylic Dispersions, Acrylic Emulsions, Acrylic Resins, Amino - Melamine - Urea Resins, Epoxy Resins, Phenolic Resins, Polyamide, Polyisocyanates, Polyurethane / Polyaspartics, Polyurethane Dispersions, Redispersable Powder, SBR Emulsions, Silane Terminated Polyethers, Silicone Resins, Styrene-Acrylic Dispersions, UV Binders and Oligomers, Vinyl Resins, Complex Inorganic Pigments, Functional Dyes, Iron Oxide, TiO3 (Titanium Dioxide), POLYMERS, Polymer Producers/Rheology modifier, SBR, Silicone Rubber, TPU, Raw Material for Electronics. Physical Form: Liquid. Recommended Dosage: 0.1-10% (Often in the range of 0.5-3%.). Certification: NDSL, ENCS. Product Code: PIM000088303. | Australia |
| Silaplane FM-0425 | Silaplane FM-04 series, including Silaplane FM-0425 with a Molecular Weight (Mn) of 10000, can react with urethane resins and polyesters to impart the excellent properties of silicone to various organic resins. As a result, Silaplane can be used as a raw material for polymers, filler dispersants, and surface treatment agents. Group: Specialty chemicals, electronic & specialties, paints & coatings, polymers. CAS No. 207308-30-3, 191920-47-5. Composition: Reactive silicone. Application: Adhesives & Sealants, Architectural and Deco., Automotive Paints, Construction, Electronic Chemicals, Fibers, Textiles & Films, Lamination and Converting, Masterbatch & Compounders, Polymer Producers, Powder Coating, Printing Inks, Rubber & Elastomers, Thermosets & Composites, Thermoplastic Transformers. Function: Adhesion Promoters, Anti-Graffiti, Antiscratch, Coupling Agents / Chain extenders, Dispersing Agents, Intermediates & Accelerators, Optical Materials, Other, Reagents, Rheology Modifiers, Semiconductor Materials, Surface Modifiers - Defoamers, Water Repellents, Acrylic Dispersions, Acrylic Emulsions, Acrylic Resins, Amino - Melamine - Urea Resins, Epoxy Resins, Phenolic Resins, Polyamide, Polyisocyanates, Polyurethane / Polyaspartics, Polyurethane Dispersions, Redispersable Powder, SBR Emulsions, Silane Terminated Polyethers, Silicone Resins, Styrene-Acrylic Dispersions, UV Binders and Oligomers, Vinyl Resins, Complex Inorganic Pigments, Functional Dyes, Iron Oxide, TiO4 (Titanium Dioxide), POLYMERS, Polymer Producers/Rheology modifier, SBR, Silicone Rubber, TPU, Raw Material for Electronics. Physical Form: Liquid. Recommended Dosage: 0.1-10% (Often in the range of 0.5-3%.). Certification: NDSL, ENCS. Product Code: PIM000088304. | Australia |
| Silaplane FM-DA11 | Silaplane FM-DA series, including Silaplane FM-DA11 with a Molecular Weight (Mn) of 1000, can react with urethane resins and polyesters to impart the excellent properties of silicone to various organic resins. As a result, Silaplane can be used as a raw material for polymers, filler dispersants, and surface treatment agents. Group: Specialty chemicals, electronic & specialties, paints & coatings, polymers. CAS No. 218131-11-4, 222416-18-4. Composition: Reactive silicone. Application: Adhesives & Sealants, Architectural and Deco., Automotive Paints, Construction, Electronic Chemicals, Fibers, Textiles & Films, Lamination and Converting, Masterbatch & Compounders, Polymer Producers, Powder Coating, Printing Inks, Rubber & Elastomers, Thermosets & Composites, Thermoplastic Transformers. Function: Adhesion Promoters, Anti-Graffiti, Antiscratch, Coupling Agents / Chain extenders, Dispersing Agents, Intermediates & Accelerators, Optical Materials, Other, Reagents, Rheology Modifiers, Semiconductor Materials, Surface Modifiers - Defoamers, Water Repellents, Acrylic Dispersions, Acrylic Emulsions, Acrylic Resins, Amino - Melamine - Urea Resins, Epoxy Resins, Phenolic Resins, Polyamide, Polyisocyanates, Polyurethane / Polyaspartics, Polyurethane Dispersions, Redispersable Powder, SBR Emulsions, Silane Terminated Polyethers, Silicone Resins, Styrene-Acrylic Dispersions, UV Binders and Oligomers, Vinyl Resins, Complex Inorganic Pigments, Functional Dyes, Iron Oxide, TiO8 (Titanium Dioxide), POLYMERS, Polymer Producers/Rheology modifier, SBR, Silicone Rubber, TPU, Raw Material for Electronics. Physical Form: Liquid. Recommended Dosage: 0.1-10% (Often in the range of 0.5-3%.). Product Code: PIM000088306. | Australia |
| Silaplane FM-DA21 | Silaplane FM-DA series, including Silaplane FM-DA21 with a Molecular Weight (Mn) of 5000, can react with urethane resins and polyesters to impart the excellent properties of silicone to various organic resins. As a result, Silaplane can be used as a raw material for polymers, filler dispersants, and surface treatment agents. Group: Specialty chemicals, electronic & specialties, paints & coatings, polymers. CAS No. 218131-11-4, 222416-18-4. Composition: Reactive silicone. Application: Adhesives & Sealants, Architectural and Deco., Automotive Paints, Construction, Electronic Chemicals, Fibers, Textiles & Films, Lamination and Converting, Masterbatch & Compounders, Polymer Producers, Powder Coating, Printing Inks, Rubber & Elastomers, Thermosets & Composites, Thermoplastic Transformers. Function: Adhesion Promoters, Anti-Graffiti, Antiscratch, Coupling Agents / Chain extenders, Dispersing Agents, Intermediates & Accelerators, Optical Materials, Other, Reagents, Rheology Modifiers, Semiconductor Materials, Surface Modifiers - Defoamers, Water Repellents, Acrylic Dispersions, Acrylic Emulsions, Acrylic Resins, Amino - Melamine - Urea Resins, Epoxy Resins, Phenolic Resins, Polyamide, Polyisocyanates, Polyurethane / Polyaspartics, Polyurethane Dispersions, Redispersable Powder, SBR Emulsions, Silane Terminated Polyethers, Silicone Resins, Styrene-Acrylic Dispersions, UV Binders and Oligomers, Vinyl Resins, Complex Inorganic Pigments, Functional Dyes, Iron Oxide, TiO9 (Titanium Dioxide), POLYMERS, Polymer Producers/Rheology modifier, SBR, Silicone Rubber, TPU, Raw Material for Electronics. Physical Form: Liquid. Recommended Dosage: 0.1-10% (Often in the range of 0.5-3%.). Certification: ENCS. Product Code: PIM000088308. | Australia |
| Silaplane FM-DA26 | Silaplane FM-DA series, including Silaplane FM-DA26 with a Molecular Weight (Mn) of 15000, can react with urethane resins and polyesters to impart the excellent properties of silicone to various organic resins. As a result, Silaplane can be used as a raw material for polymers, filler dispersants, and surface treatment agents. Group: Specialty chemicals, electronic & specialties, paints & coatings, polymers. CAS No. 218131-11-4. Composition: Reactive silicone. Application: Adhesives & Sealants, Architectural and Deco., Automotive Paints, Construction, Electronic Chemicals, Fibers, Textiles & Films, Lamination and Converting, Masterbatch & Compounders, Polymer Producers, Powder Coating, Printing Inks, Rubber & Elastomers, Thermosets & Composites, Thermoplastic Transformers. Function: Adhesion Promoters, Anti-Graffiti, Antiscratch, Coupling Agents / Chain extenders, Dispersing Agents, Intermediates & Accelerators, Optical Materials, Other, Reagents, Rheology Modifiers, Semiconductor Materials, Surface Modifiers - Defoamers, Water Repellents, Acrylic Dispersions, Acrylic Emulsions, Acrylic Resins, Amino - Melamine - Urea Resins, Epoxy Resins, Phenolic Resins, Polyamide, Polyisocyanates, Polyurethane / Polyaspartics, Polyurethane Dispersions, Redispersable Powder, SBR Emulsions, Silane Terminated Polyethers, Silicone Resins, Styrene-Acrylic Dispersions, UV Binders and Oligomers, Vinyl Resins, Complex Inorganic Pigments, Functional Dyes, Iron Oxide, TiO10 (Titanium Dioxide), POLYMERS, Polymer Producers/Rheology modifier, SBR, Silicone Rubber, TPU, Raw Material for Electronics. Physical Form: Liquid. Recommended Dosage: 0.1-10% (Often in the range of 0.5-3%.). Certification: ENCS. Product Code: PIM000088309. | Australia |
| Silica Fume | Silica Fume. Group: Construction / dry-mix / filler materials. construction / gfrc (glass fiber reinforced concrete) / filler materials. construction / gunite and shotcrete / gunite additives. construction / gunite and shotcrete / shotcrete additives. construction / gypsum-board, plasterboard and drywall / filler materials. construction / gypsum-board, plasterboard and drywall / fire retardant additives. construction / ready-mix filler materials. industrial materials and chemicals / fire protection / flame retardant additives. oil & gas industry / additives for cementing. | |
| SKYPRENE® Y30 SLICED | SKYPRENE® Y30 SLICED is a general purpose, mercaptan-modified chloroprene rubber (CR) with a small chip size. Exhibits good crystallization- & heat resistance, tack retention time, high viscosity and good crystallization rate. Offers tear strength, tensile strength with high mooney viscosity which reduces production cost and makes it possible to use a large amount of filler. SKYPRENE® Y-30 can be used to blend with other grades to improve processability. SKYPRENE® Y30 SLICED is recommeded to use in automotive rubber parts, industrial rubber parts, belts, hoses, rolls, anti-vibration parts, electrical wire & cables and adhesive applications. Please see the brochure below and for further details contact our local sales representative today. Group: Specialty chemicals, electronic & specialties, paints & coatings, polymers. Composition: Butadiene Rubber. Application: Thermosets & Composites, Rubber & Elastomers. Function: POLYMERS, Butyl Rubber. Physical Form: Solid. Product Code: PIM000046539. | Australia |
| SORBITOL POWDER DC200 | SORBITOL POWDER DC 200 mesh is a direct compressible sorbitol powder and is a sugar alcohol (polyol) which provides properties as a filler, filler/binder and as a bulk sweetener. It is used in wet granulation and direct compression also used in the pharmaceutical, cosmetic and food industry as a sweetener or humectant for protection against loss of moisture content. It is found commonly in "sugar-free" chewing gum, and may be used to sweeten pharmaceutical dosage forms such as syrups or chewable tablets. Sorbitol is about two-thirds as sweet as glucose. It has a lower calorie content than glucose and may be used in diabetic foods. Group: Pharmaceutical ingredients, excipients. CAS No. 50-70-4. Composition: D-Sorbitol > = 99 %. Application: Oral, Tablets, Pellets, Powder. Function: Sweetener. Physical Form: Powder. Certification: EP. Product Code: PIM000009621. | Australia |
| Spotless - Laundry Powder | SPOTLESS is manufactured especially for users who require an effective laundry powder at a moderate price. This product has excellent cleaning performance, contains no insert fillers, has controlled foam and may be used in front loading and top loading machines. Use half to one cup (50 to 100 grams) per average domestic top-loading machine. Front loading machines require half a cup per load. Ensure that SPOTLESS powder is fully dissolved. Be careful not to overload the machines as this results in poor washing. SPOTLESS works in both cold and hot water but best results are obtained if warm water is used. Wool garments should not be washed in SPOTLESS. Pack Sizes: 5KG, 25KG. Product ID: WC180. Chemicals By Industry, Laundry & Dry Cleaning. | Australia Wide |
| Syloid® XDP 3150 | SYLOID® XDP 3150 (Silicon di oxide) has a superior adsorptive capacity as carrier for liquids and liquid pharmaceutical actives. Group: Pharmaceutical ingredients, excipients. CAS No. 7631-86-9. Composition: Silicon Dioxide. Application: Sweetener, Tablets, Capsules, Granules, Pellets. Function: Filler. Physical Form: Powder. Product Code: PIM000009035. | Australia |
| Synthetic anhydride | Synthetic Anhydrite is an odourless, white to grey crystalline solid composed of anhydrous calcium sulfate. This product is manufactured from anhydrite, a naturally occurring mineral. It provides greater fluidity, stability, mechanical resistance, thermal conductivity and reduced dry times to cement binders such as mortars and self-levelling screeds. This product is highly hygroscopic and readily transforms to gypsum with the addition of water. Uses: Synthetic Anhydrite can be used in a variety of applications in the construction industry such as drywall, cements, plasters and paint fillers. It can be used in fertilizer, paper production and as a drying agent. It is used in self-levelling soils and as a binder and stabilizer for sub-base gravel in foundations. Group: Calcium Sulfate (Plaster/ gypsum/ anhydrite). CAS No. 7778-18-9. Pack Sizes: 25 kg bags and bulk bags. Trading Locations; Sydney, Houston, Dubai, Jakarta, Ho Chi Minh City, Bangkok, Kuala Lumpur and Singapore. Categories: Anhydride synthesis. | |
| XIAMETER OFS-6020 SILANE | XIAMETER OFS-6020 Silane is made from Diaminofunctional silane, and functions as a coupling agent. XIAMETER OFS-6020 Silane possesses both organic and inorganic reactivity. XIAMETER OFS-6020 Silane can react with organic polymers and glass or other inorganic mineral surfaces. XIAMETER OFS-6020 Silane offers the benefits to improve adhesion and increase wet and dry tensile strength, flexural strength & compressive strength and Improved compatibility between inorganic filler and organic polymer. XIAMETER OFS-6020 Silane is recommended to use in clay-reinforced elastomers such as natural and nitrile rubber, mineral-reinforced nylon 6, nylon 6/6 and polybutylene terephthalate, fibreglass finish or as resinous additive and thermoset resins. Please see the specification sheet below and for further details contact our local sales representative today. Group: Specialty chemicals, paints & coatings, polymers. Composition: Diaminofunctional silane. Application: Printing Inks, Can, Coil and Industrial, Architectural and Deco., Automotive Paints, Adhesives & Sealants, Rubber & Elastomers. Function: Adhesion Promoters, ADDITIVES, Coupling Agents / Chain Extenders. Physical Form: Liquid. Recommended Dosage: 1% on resin solid. Product Code: PIM000004159. | Australia |
| XIAMETER OFS-6076 SILANE | XIAMETER OFS-6076 Silane is an ambifunctional compound containing chloroalkyl functionality and three hydrolyzable alkoxysilyl groups. Possessing both organic and inorganic reactivity, the product has a dual nature and can react with organic polymers and also with glass, metal and other inorganic materials. As a coupling agent, it can be used either as an additive to the polymer or as a pre-treatment on inorganic surfaces. Many chemical reactions are possible, providing significant improvements in polymer/filler or polymer/substrate interaction. Group: Specialty chemicals, paints & coatings, polymers. Composition: 3-chloropropyltrimethoxysilane s. Application: Construction, Architectural and Deco. Function: POLYMERS, Butyl Rubber, Silicone Rubber. Physical Form: Liquid. Product Code: PIM000031769. | Australia |
Our database is helping our users find suppliers everyday.
