Find where to buy products from Australian suppliers, including: distributors, industrial manufacturers, bulk supplies and wholesalers of raw ingredients & finished goods.
Search for products or services, then visit the suppliers website for prices, SDS or more information. You can also view suppliers in NZ, UK or the USA.
| Product | Description | |
|---|---|---|
| Blue Power | This is a high quality Urea solution especially developed for the automotive SCR catalytic converter and used for the reduction of emissions in Euro 4 and Euro 5 commercial diesel vehicles. By injecting Blue Power directly into the exhaust system to combine with exhaust gasses in the catalytic converter all harmful nitrogen oxides (NOx) are immediately reduced into harmless nitrogen and water. This results in increased power and torque along with an extended service lifetime for vehicles. Uses: Fuel & Oil Treatments. Product ID: 169. Categories: Fuel & Oil Treatments. |  Western Australia |
| Carbon Flush | A high strength blend of solvents, surface active agents and sludge dispersants. Cleans valves, injectors and combustion chambers restoring power and improving economy. Uses: Fuel & Oil Treatments. Product ID: 173. Categories: Fuel & Oil Treatments. | Western Australia |
| DIESEL INJECTOR CLEANER | PowerUp Diesel Injector Cleaner consists of a high strength blend of solvents, surface active agents and sludge dispersants for engine top-end cleaning and decarbonising by addition to the fuel tank helps cleans injectors, valves & combustion chambers restores power loss from fouled injectors & allows smoother engine running. reduces exhaust smoke. improves engine efficiency & fuel economy. helps to remove water from fuel and fuel lines. reduces the formation of wax and gum deposits. allows fuel to burn cleanly and efficiently. helps neutralize harmful acids. Uses: Fuel & Oil Treatments. Product ID: 80. Categories: Fuel & Oil Treatments. | Western Australia |
| DIESEL PARTICULATE FILTER CLEANER (DPF) | DIESEL PARTICULATE FILTER CLEANER DESCRIPTION: Diesel particulate filters are deigned to remove 85-100% of the soot particles created by incomplete combustion of the fuel/air mix in diesel engines. These particles accumulate in the DPF filter and this filter will need to be cleaned and regenerated from time to time to prevent the vehicle going in to limp mode. By using PowerUps DPF Cleaner which is a combustion catalyst, it will induce passive regeneration of the filter by enhancing the combustion process, increasing the temperature of the exhaust gasses and lowering the soot burn out temperature. This improved regeneration process reduces the need to remove the filter for cleaning because of high soot content. Also by improving the combustion process PowerUps DPF Cleaner ensures a more complete burn there for reducing the amount of diesel particle matter that will end up in the particulate filter. USE. By adding 300ml of PowerUps DPF Cleaner to approximately 30L of diesel fuel it will help burn off any built up soot, reducing back pressure of the filter and help remove any warning lights. As ongoing maintenance DPF Cleaner should be added at 300ml to approximately 60L of diesel fuel to prevent any buildup of soot in the filter. . Other Benefits. *Increase power. Improves throttle response and engine performance. Improves low temperature starting. Increase lubrication of the fuel. Cleans injectors and fuel lines. Can be used in diesel and all recognised bio-Diesels. Uses: Fuel & Oil Treatments. Product ID: 480. Categories: Fuel & Oil Treatments. | Western Australia |
| DTANE +8 | Cetane Booster. Your engine is only as good as the fuel you feed it. Cetane, which is also sometimes referred to as hexadecane or isocetane, is a colorless gas with the chemical formula C16H34. PowerUp Dtane +8 will improve the Cetane level in the diesel fuel up to 8 points depending on the quality of the fuel. How can a higher Cetane number be achieved?. There are two ways to gain a higher Cetane number. The first is to do it during the refining process. A low density fuel contains fewer BTUs and consequently provides less power to a diesel engine. Another way to gain a higher Cetane number . A higher Cetane number can also be derived through the addition of PowerUp Dtane +8 Cetane improver chemistry. When PowerUp Dtane +8 improver is added to a low Cetane diesel fuel, the result is a higher-Cetane-number fuel with more power and fuel efficiency. Dtane +8 is not only a Cetane improver but also a full fuel system maintenance additive that has many other benefits. Along with being able to absorb small amounts of water in the fuel system it will also increase the lubrication of the fuel up to 20%. Dtane Benefits. Quicker starting. Quieter operation with less diesel chatter. Improved fuel efficiency. A reduction of harmful emissions. Less wear and tear on the starter and batteries. Full system Cleaner. Improves lubrication and corrosion protection, reducing engine wear. Improves throttle response and engine performance. Improves low temperature starting. Safe with DPF filters. Suitable for common rail and direct injection diesel systems. Compatible with recognised biodiesels. Removes moisture from fuel. Use. Add 250- 300ml of PowerUp Dtane + 8 to 60 - 80L of diesel fuel. Add to fuel tank before filling with diesel to ensure proper mixing. Safety. Keep out of Reach of Children. Uses: Fuel & Oil Treatments. Product ID: 482. Categories: Fuel & Oil Treatments. | Western Australia |
| DynaFuel | DynaFuel: ALL FUEL TREATMENT REDUCES FUEL CONSUMPTION UP TO 10% Helps absorb and remove water from fuel and lines, neutralize acids, remove deposits and retard fungal growth. Suitable for petrol, diesel, small engines. Super concentrated and economical. Categories: Mining, Industrial, Mechanical, Agricultural, Marine, FUEL TREATMENTS & CLEANERS | Western Australia |
| ENGINE STOP LEAK | ENGINE STOP LEAK DESCRIPTION: ENGINE StopLeak is a concentrated synthetic blend of penetrants, swelling agents and viscosity enhancers designed to help restore the sealing efficiency of leaky seals and gaskets. USE. Add about 60 ml of ENGINE StopLeak per litre of crankcase oil. Safety. ENGINE StopLeak contains hydrocarbon solvents and is classified as hazardous. Irritating to eyes and skin. Keep out of reach of children. Avoid contact with skin and eyes. Avoid breathing vapour. Read Material Safety data Sheet before use. Uses: Fuel & Oil Treatments. Product ID: 486. Categories: Fuel & Oil Treatments. | Western Australia |
| FUEL POWER | "The best fuel treatment on the market". This product is for the removal of water, increasing the quality of fuel and is extremely concentrated for economical use. This product also neutralises acids, dissolves wax and gum, reduces emissions and increases lubricity of fuel by up to 22%. Uses: Fuel & Oil Treatments. Product ID: 187. Categories: Fuel & Oil Treatments. | Western Australia |
| Fueltreat Biocide | FUELTREAT BIOCIDE is a specially designed liquid biocide against micro-organisms contaminating fuel storage tanks and systems. FUELTREAT BIOCIDE is effective at low use levels, against microbial species commonly encountered in fuel systems, including bacteria, yeast, and mould. FUELTREAT BIOCIDE is designed to cause inhibition of microbial growth upon contact and quickly result in cell death. The exact time to kill all microbes in a fuel will vary but will typically be between 8 and 36 hours. FUELTREAT BIOCIDE is effective in systems containing both fuel and water. Unlike other fuel treatment biocides, the active ingredients in FUELTREAT BIOCIDE are not deactivated by water. Uses as required. Ensure correct PPE is worn. Pack Sizes: 20 Litres. Product ID: AC3091. Chemicals By Industry, Marine, Chemicals By Industry, Mining. |  Australia Wide |
| Fueltreat Biocide | Liquid biocide against micro-organisms contaminating fuel storage tanks and systems. Uses: Treatment against microbial species commonly encountered in fuel systems, including bacteria, yeast, and mould. Group: Biocide. Grades: Non DG. Pack Sizes: 20L. Product ID: AC3091. | Australia Wide |
| OCTANE BOOSTER +30 | This concentrated octane enhancer will increase octane number by up to 30 RON points at 1: 200, for general use. It is fortified with fuel system cleaners and top end lubricants and may be diluted to give an effective retail strength octane booster that is suitable for use in leaded, unleaded and high octane petrol. Uses: Fuel & Oil Treatments. Product ID: 201. Categories: Fuel & Oil Treatments. | Western Australia |
| OIL FORTIFIER | OIL FORTIFIER DESCRIPTION: This blend of synthetic additives is designed to enhance the performance of API, SAE and CCMC engine oils and lubricants, particularly in old or worn engines. It provides the following benefits: * Boosts oil viscosity. Improves compression. Maintains oil pressure. Reduces oil consumption. Reduces wear. Reduces corrosion. Reduces exhaust smoke. Reduces engine noise. USE: When engine is at normal operating temperature, run at a fast idle and add 300ml Oil Fortifier per 5 litres crankcase oil. SAFETY: Oil Fortifier is not classified as hazardous. Read Material Safety Data Sheet before use. Spillages may be slippery. Uses: Fuel & Oil Treatments. Product ID: 487. Categories: Fuel & Oil Treatments. | Western Australia |
| PETROL INJECTOR CLEANER | PowerUp Petrol Injector Cleaner consists of a high strength blend of solvents, surface active agents and sludge dispersants for engine top-end cleaning and decarbonising by addition to the fuel tank or by using automatic flushing equipment. Fuel injectors should be maintained in peak condition to ensure your engine is operating efficiently providing optimum power and minimum fuel use. City stop- start driving and low quality fuel causes unburnt fuel to form deposits on the fuel injector nozzles which in turn deforms the spray pattern to the cylinders and results in poor engine performance. The addition of PowerUp Injector Cleaner to the fuel tank on a regular basis ensures that the complete fuel system is maintained in good condition preventing carbon build up in the injectors and inlet valves and poor atomisation of the fuel. PowerUp Injector Cleaners provide the following benefits: * helps cleans injectors, valves & combustion chambers. restores power loss from fouled injectors & allows smoother engine running. reduces exhaust emissions. improves engine efficiency & fuel economy. Petrol Injector Cleaner is suitable for use in all petrol engines. Dissipates water in the fuel and helps prevent algae formation. Uses: Fuel & Oil Treatments. Product ID: 202. Categories: Fuel & Oil Treatments. | Western Australia |
| Petrol System Treatment | Petrol System Treatment: Maintains injectors, carburettor jets and fuel lines. Categories: Industrial, Mechanical, Agricultural, Fuel Treatments | Western Australia |
| Petrol System Treatment Plus Octane Booster | Petrol System Treatment Plus Octane Booster: This is a powerful fuel system cleaner and top-end lubricant, a clean efficient fuel system under normal driving conditions for leaded and unleaded petrol engines. Categories: Industrial, Mechanical, Agricultural, Fuel Treatments, Octane Boosters | Western Australia |
| PROFLUSH | Pro Flush is a specially formulated blend of penetrants, lubricants and sludge dispersants designed for use in all petrol and diesel engines. It provides the following benefits: Cleans all engine parts. Removes harmful sludge and other contaminants. Cleans valves and hydraulic valve lifters. Frees piston rings. Reduces fuel consumption. Contains no harmful aromatic hydrocarbons. Fortified with Extreme Pressure additives to ensure engine protection. Uses: Fuel & Oil Treatments. Product ID: 203. Categories: Fuel & Oil Treatments. | Western Australia |
| PU OIL Syntech 15W40 CK4 Low SAPS OEM | SYNTECH 15W40 CK4/SN. SEMI SYNTHETIC OIL MADE FROM HYDROCRACKED BASE STOCKS. Features and Benefits. Syntech 15W40 CK4/SN is a Low SAPS, new generation, premium heavy duty diesel oil that has been. formulated specifically to meet the latest Euro VI requirements of Australian and imported designed low. emission engines. Designed and formulated to provide exceptional protection for highly rated diesel engines. running in severe service conditions. It affords increased fuel economy, long drain intervals and prolonged. engine life. OEM approved - Cummins, Detroit Diesel, Volvo, Mack, Renault. Specially formulated to protect after exhaust systems. Excellent soot dispersancy. Superior friction and wear control. Longer drain intervals. Approvals / Recommendations. 15W40 CK4/SN meets or exceeds the following specifications. API CK-4/CJ-4/CI-4+/CI-4. MAN 3275 & 3575. ACEA E7-12, E9-12. DQC III-10-LA. CATERPILLAR ECF-3. MTU 2.1. MB 228.31. FORD WSS-M2C171-E. FORD WSS-M2C171-F1. MACK EO-O PREMIUM PLUS. Volvo VDS-4- Approval Yes. Mack EO-S 4.5- Approval Yes. Renault VI RLD-3- Approval Yes. Cummins CES 20086- Approval Yes. Detroit Diesel DDC93k222- Approval Yes. Applications. Recommended for high speed, turbocharged diesel and petrol engines, in particular all emission design engines. Specially formulated to protect exhaust after treatment devices such as diesel particulate filters (DPFs). Uses: Performance Oils. Product ID: 375. Categories: Performance Oils. | Western Australia |
| PU OIL Syntech 15W40 oil CJ4- Low SAPS | SYNTECH 15W40 CJ4/SN. SEMI SYNTHETIC OIL MADE FROM HYDROCRACKED BASE STOCKS. Features and Benefits. Syntech 15W40 CJ4/SN is a heavy duty Low SAPS. premium diesel lubricant incorporating the most. advanced development in lubrication chemistry and. high viscosity index premium base oils resulting in a. high performance diesel engine oil. Syntech 15W40 CJ4/SN has been formulated. specifically to meet the requirements of Australian. and imported designed low emission engines. including those engines which incorporate exhaust. gas recycling (EGR) to provide fuel efficiency, high. wear protection and long drain capability. EGR can. add to deposits forming in the combustion chamber. and therefore the low sulphated ash content assists in. maintaining engine cleanliness. Approvals / Recommendations. 15W40 CJ4/SN meets or exceeds the following. specifications. API CJ-4, CI-4 PLUS, CH-4, CF API, SN, SL, SJ . ACEA E9. ACEA E7. Mack EO-O Premium Plus. John Deere -PierIV. Caterpillar ECF-3. Cummins CES 20081. JASO DH-2. MAN 3275 & 3575. Volvo VDS-4, VDS-3 extended drain. MB 228.31. MTU Type 2.1. Renault Truck RLD-3. Deitz DQC III-05. Detroit Diesel DDC 93K218. Applications. Recommended for high speed, turbocharged. diesel and petrol engines, in particular all. emission design engines. Specially formulated to protect exhaust after. treatment devices such as diesel particulate. filters (DPFs). Uses: Performance Oils. Product ID: 374. Categories: Performance Oils. | Western Australia |
| SLIP OIL CONDITIONER | SLIP OIL ANTIWEAR ADDITIVE. DESCRIPTION. Slip Oil Antiwear Additive is a special blend of surface modifying lubricants and anticorrosion agents designed specifically to reduce metal to metal friction between all moving parts. It provides the following benefits: * Reduces friction. Reduces metal wear. Reduces oil temperature. Prolongs oil life. Reduces fuel consumption. Promotes smoother engine operation. Resists corrosion. Resists harmful crankcase gases. Reduces maintenance costs. Increases power output. Extends cutting tool life. DIRECTIONS. Slip is suitable for use in engines (including 2-stroke engines), gearboxes, differentials (except limited slip differentials), bearings, pumps, etc. Add 60 mls Slip Oil Antiwear Additive per litre of engine, gear or differential oil at each oil change. Use 40 mls per litre in bearing grease, pump oil, etc. Slip may be used undiluted with excellent results in machine shops, for general drilling, tapping, punching, threading and broaching, and for low or high sped lathe work. It is suitable for use on bits, blades, lathe tools and hole saws. By reducing friction Slip reduces cutting tool temperatures and extends tool life substantially. SAFETY. Slip is not classified as hazardous. Read Material Safety Data Sheet before use. Keep out of reach of children. Spillages may be slippery. PROPERTIES. Appearance: Oily amber liquid. pH: Neutral. Specific Gravity: Approx. 1.25. % Solids: > 98%. Boiling Point: > 200oC. Flash Point: > 200oC. Flammability: Non flammable. Corrosivity: Non corrosive. Toxicity: Non toxic. Application: 3-6% in engine & machinery lubricants. Neat for lathe work,tapping etc. Uses: Fuel & Oil Treatments. Product ID: 214. Categories: Fuel & Oil Treatments. | Western Australia |
| Surefire | Surefire is the ultimate fuel treatment assuring better performance, increased power and efficiency, resulting in improved economy. Uses: Fuel Injector Cleaner. Group: Workshop Supplies, Car & Truck Detailing, Mining and Industrial. Alternative Names: Fuel Injector Cleaner. Pack Sizes: 20L, 5L. |  |
| TRANSMISSION TREATMENT | TRANSMISSION TREATMENT DESCRIPTION: This blend of penetrants, inhibitors and lubricants provides the following benefits: * Conditions internal components. Extends transmission fluid life. Frees sticky parts. Allows smoother gear changes. Contains no harmful aromatic hydrocarbons. USE. Add about 300 ml Transmission Treatment through the transmission fill tube, but do not exceed about 5% by volume of total transmission fluid (refer to car manual). Safety. Transmission Treatment is not classified as hazardous. Keep out of reach of children. Avoid contact with skin and eyes. Uses: Fuel & Oil Treatments. Product ID: 489. Categories: Fuel & Oil Treatments. | Western Australia |
Our database is helping our users find suppliers everyday.
