Mineral Oil Suppliers Australia
Find where to buy products from Australian suppliers, including: distributors, industrial manufacturers, bulk supplies and wholesalers of raw ingredients & finished goods.
Search for products or services, then visit the suppliers website for prices, SDS or more information. You can also view suppliers in NZ, UK or the USA.
Product | Description | |
---|---|---|
Mineral Oil Based Defoamer Quick enquiry Where to buy Suppliers range | FOAM XTract Mineral Oil Based Foam Control Additive. Tri-Tech Chemical Company Supplying Creative Chemical Solutions. | Sunshine West |
Light Mineral Oil Quick enquiry Where to buy Suppliers range | Light Mineral Oil suppliers. MINIMUM QUANTITY 25 KGS. Australian suppliers of specialist chemical products. Categories: Personal Care | NSW, QLD, SA, WA, VIC, TAS |
PU OIL Protech Powertrans Gear Oil Mono 30W TO-4 Mineral Quick enquiry Where to buy Suppliers range | PU OIL Protech Powertrans Gear Oil Mono 30W TO-4 Mineral. Uses: Performance Oils. Product ID: 323. Categories: Performance Oils. | Western Australia |
PU OIL Protech Powertrans Gear Oil Mono 50W TO-4- Mineral Quick enquiry Where to buy Suppliers range | Syntech FS POWERTRANS 50. FULLY SYNTHETIC. SYNTECH FS POWERTRANS 50 is a full synthetic, high performance, multifunctional transmission fluid. blended from premium synthetic Group IV PAO base oils and selected additives designed to meet the. requirements of Caterpillar and Komatsu final drives, powershift transmissions, torque converters. hydraulic systems, off-highway equipment and any other system calling for TO-4 specification. Applications. Superior frictional characteristics for optimum clutch life. Enhanced wear protection leading to longer life, reduced oxidation and higher film. strength. Wide application range. Minimises degradation of equipment. Approvals / Recommendations. SYNTECH FS GEAR POWERTRANS 50 meets or exceeds the following Industry Specifications. GL-3. CATERPILLAR TO-4. ROAD RANGER 50 TRANSMISSIONS. KOMATSU. ROCKWELL 0-81. VOLVO. ZF TE-ML01. Typical Main Characteristics. Typical Data FS Powertrans 50. Specific gravity at 15°C 0.8605. Kinematic viscosity at 40°C, mm2/s (cSt) 150. Kinematic viscosity at 100°C, mm2/s (cSt) 19.2. Viscosity index 145. Flash Point °C 229. Uses: Performance Oils. Product ID: 324. Categories: Performance Oils. | Western Australia |
A200V is a vegetable derived rheology modifier, water repellency agent and gloss enhancer for formulation with low-polarity organic liquids for cosmetic and personal care applications. Pack Sizes: 100g, 250g, 500 grams, 1kg, 5 kgs, 10kg. Similar to: A2614V (Croda, Inc.). Quick enquiry Where to buy Suppliers range | Uses: Can be used to make solid gels of non-polar organic liquids such as mineral oils, esters or castor oil for lipstick, lip balms and mascara applications. Structurant for antiperspirant and deodorant sticks. Can be used to form stable, aesthetically pleasing, water-in-gelled oil or silicone-in-gelled oil emulsions. Excellent water and sweat repellant in sunscreens, lotions and balms. Group: Personal Care; Cosmetic Raw Materials; Thickeners. Alternative Name: Ethylenediamine/Hydrogenated Dimer Dilinoleate Copolymer Bis-Di-C14-18 Alkyl Amide. Grade: Cosmetic Ingredients. | Australia & Worldwide |
Aqua Guard Radiator Inhibitor Quick enquiry Where to buy Suppliers range | AQUA GUARD RADIATOR INHIBITOR is a green coloured corrosion inhibitor concentrate designed to produce an economical corrosion inhibited coolant when added to soft or demineralised water. Use to provide adequate protection for cast iron engines whose fluids dropped and replaced annually. This product meets the requirements of AS2108.1:2004 Type B and when mixed according to directions will provide adequate protection for 12 months or 50,000 km under standard Australian road going conditions. Please note that this product should not be mixed with AS2108.1:2004 Type A coolants and this product has no effect on freezing or boiling point of a cooling system (ie not AF or AB) and for this reason this product is not recommended for freezing conditions or high performance applications. Pack Sizes: 5 Litre, 20 Litres, 1000 Litres, 1000 Litres RTU. Product ID: AC399. Chemicals By Industry, Automotive. | Australia Wide |
Bathroom / Toilet Cleaner Quick enquiry Where to buy Suppliers range | Safely cleans and deodorises all toilet bowls, bidets or urinals including porcelain and stainless steel, glass, showers, baths, hot tubs. The enzymes in our Toilet / Bathroom cleaner break down bowl grime into its basic elements. Carbon, hydrogen and other elements readily integrate with the environment instead of polluting it. Even mineral buildups like calcium and lime simply fall apart when our enzymes break down the organic glue that holds it in place. Plus, our enzymes completely remove odours, leaving the room smelling fresh and truly clean without strong fragrances.. Enzyme Wizard is committed to environmentally responsible cleaning products. | Victoria, Australia |
CELLIGENT® Quick enquiry Where to buy Suppliers range | Acts as an anti-aging, antioxidant and protective active. The active ingredient complex has been especially developed for treating UV-stressed skin. It is free from preservatives, GMOs, BSE, CMR, pesticides, mineral oils and heavy metals. The composition of carnosolic acid and ethyl ferulate neutralizes the free radicals which damage skin cells thus effectively preventing the occurrence of UV damage. The uridine monophosphate component, one of the pre-cursors to DNA synthesis, also supports the cells in repairing their DNA. It is suitable for after sun rescue treatment. Used in anti-age products, skin care products for sun protection, after-sun products. Suitable for o/w and w/o emulsions and gels. Uses: Sun care (Sun protection, After-sun, Self-tanning); Creams, Lotions, Gels, Anti-Ageing preparations; Skin care (Facial care, Facial cleansing, Body care, Baby care). Group: Raw Materials; Protective Agents; Regenerating; Revitalizing Agents; Anti-Aging Agents; Antioxidants. Alternative Name: Helianthus Annuus Seed Oil, Ethyl Ferulate, Rosmarinus Officinalis Leaf Extract, Tocopherol. Grade: Cosmetics. CAS Number: 8001-21-6, 4046-02-0, 84604-14-8, 54-28-4. Pack Sizes: 50g, 100g, 250g, 500 grams, 1kg. | Australia & Worldwide |
Comet - Foaming Cleaner Sanitiser Quick enquiry Where to buy Suppliers range | COMET is an AQIS compliant chlorine-based liquid detergent/sanitiser formulated for use in food and beverage processing areas, live stock abattoirs, refrigeration containers and rooms, kitchens, toilets, shower recesses and laundries. REFRIGERATION CONTAINERS: Use from 1 part product to 20 parts water or as required dilution rates to remove different types of mineral and animal based soils. KITCHENS: For tables, cutting boards, bench-tops, tiled and stone floors, wash with COMET at 1:50 dilution. Leave for 5 - 10 minutes then rinse. BATHROOMS: COMET may be used to clean mould, soap scum, etc. from shower recesses and surrounding areas. Apply at 1:20 dilutions to the surface, leave for 5 minutes then rinse clean, using a brush if necessary. Ensure adequate ventilation in confined areas. ALGAE AND SLIME REMOVAL: For removing algae and mould from concrete, mortar and roof tiles, use 1 part COMET per 20 parts of water. Apply liberally to the surface and leave for at least 30 minutes. Brush off dead algae and hose with water. LAUNDRY: For bleaching, white clothes, immerse in a 1:500 solution of COMET (2ml per litre). Soak for 2 - 3 hours or overnight, then rinse then wash. For baby nappies, remove soils matter and soak for 2 hours in COMET at 1:100 dilutions. Rinse, then wash. Pack Sizes: 5 Litre, 20 Litres, 205 Litre Drums, 1000 Litres. Product ID: WC420. Chemicals By Industry, Abattoir, Chemicals By Industry, Food & Beverage Processing, Chemicals By Industry, Janitorial & Maintenance, Chemicals By Industry, Kitchen, Chemicals By Industry, Pools & Recreation. | Australia Wide |
Comet Green Quick enquiry Where to buy Suppliers range | COMET GREEN is an AQIS compliant chlorine-based liquid detergent/sanitiser formulated for use in food and beverage processing areas, live stock abattoirs, refrigeration containers and rooms, fruit & vegetable processing, toilets, shower recesses and laundries. FRUIT & VEGETABLE PROCESSING: For manual cleaning use COMET GREEN at between 2 and 5% with cold water. That is 2 mls / litre of water or 50:1 or 50mls / litre or 20:1. Agitate surfaces and allow up to 3 minutes contact time and rinse with potable water. If the use of a quaternary ammonium compound is required thorough rinsing of all surfaces is critical between the two applications. REFRIGERATION ROOMS & VEHICLES: Use from 1 part product to 20 parts water or as required dilution rates to remove different types of mineral and animal based soils. FOOD PREPARATION / SHIP GALLIES: For tables, cutting boards, bench-tops, tiled and stone floors, wash with COMET GREEN at 1:50 dilution. Leave for 5 - 10 minutes then rinse. BATHROOMS & SHOWERS: COMET GREEN may be used to clean mould, soap scum, etc. from shower recesses and surrounding areas. Apply at 1:20 dilutions to the surface, leave for 5 minutes then rinse clean, using a brush if necessary. Ensure adequate ventilation in confined areas. ALGAE, FUNGI AND MOULD: For removing algae and mould from concrete, mortar and roof tiles, use 1 part COMET GREEN per 20 parts of water. Apply liberally to the surface and leave for at least 30 minutes. Brush off dead algae and hose with water. LAUNDRIES: For bleaching, white clothes, immerse in a 1:500 solution of COMET GREEN (2ml per litre). Soak for 2 - 3 hours or overnight, then rinse then wash. For baby nappies, remove soils matter and soak. Pack Sizes: 5 Litre, 20 Litres, 205 Litre Drums, 1000 Litres. Product ID: WC421. Chemicals By Industry, Food & Beverage Processing. | Australia Wide |
COOL PLUS MAX Quick enquiry Where to buy Suppliers range | COOL PLUS MAX DESCRIPTION. COOL PLUS MAX is a superior water based corrosion inhibitor based on Organic Additive Technology (OAT), which is a selectively balanced mixture of organic additives. OAT formulations are longer life products than those based on conventional formulations, making OATs the products of choice for general aftermarket servicing. 1:20 Mixing ratio. COOLPLUS MAX is a phosphate ,amine, nitirite and silicate-free formulation containing a pH-buffered blend of additives known to reduce the corrosion of steel, cast iron, aluminium alloy, brass, copper and solder. It will not reverse pre-existing corrosion problems. COOL PLUS MAX is not an anti-freeze/anti-boil type coolant and should not be used in conflict with engine manufacturers' recommendations. Replace at 36 months / 100,000 km intervals. To avoid possible incompatibility problems, do not mix with any other inhibitors or coolants. COOL PLUS MAX provides long life protection against scale, rust and residue build up. It allows maximum fuel economy by performing at the desired engine operation temperature. Contains 400g per litre of ethylene glycol as well as a bittering agent at 10ppm. Available in red or green. USE. Add 50ml of COOL PLUS MAX to every 1L of demineralised water or 1L of Cool Plus Max treats 20L of demineralised water. Dilute product before adding to the cooling system. To avoid possible incompatibility problems, do not mix with any other inhibitors or coolants. SAFETY. COOL PLUS MAX contains ethylene glycol and is poisonous if swallowed. Read Material Safety Data Sheet before use. Avoid contact with the skin and eyes. Keep out of reach of children. COOL PLUS MAX. Exceeds the performance requirements of the following standards. ASTM D1384 Corrosion Test for Engine Coolants in Glassware. ASTM D4340 Corrosion of Cast Aluminium Alloys in Engine Coolants under Heat Rejecting Conditions. Australian/New Zealand Standard 2108.1:2004 "Engine Coolants Type A and Type B for Engine Cooling Systems" using 40 ml per litre hard water. Heat-stressed Alloy Corrosion: ASTM D4340. Heat Transfer Corrosion Rate: 0.3 mg/cm2/week. Max allowable corrosion: 1.0 mg/cm2/week. Crevice/pitting Attack: None. Uses: Cooling Systems. Product ID: 447. Categories: Cooling Systems. | Western Australia |
CORROSOAK Quick enquiry Where to buy Suppliers range | Rust and Scale Remover. Description. CorroSoak is designed for the safe removal of rust, scale and tarnish from most metal objects. It has numerous applications in the automotive, marine, construction, mining, and food processing industries, as well as many areas around the home. CorroSoak is biodegradable, water-based and contains no solvents, phosphates, mineral acids or caustic ingredients. Approved by the Dept. of Primary Industry and Energy for use in export registered meat establishments. Use. CorroSoak can be used as a radiator flushing compound to remove rust and scale buildup from the cooling system. Drain old coolant from the cooling system (including heater) and refill with water. Add 500 mls CorroSoak to the radiator and run the engine for 15 to 20 minutes. Drain and thoroughly flush the system with water before filling with coolant such as Cool Max or Cool Plus coolants. To conserve product, any loose rust or scale deposits should first be removed using a wire brush. All traces of oil and grease should be cleaned off with detergent. CorroSoak is simply diluted in hot or cold water at the rate of 1 litre concentrate to 5 litres water, and the metal object immersed for between 3 - 24 hours. Hot water works much more quickly than cold water. The object is then removed, rinsed well and dried. The diluted CorroSoak may be re-used many times. Not suitable for zinc galvanized surfaces. Use with caution on magnesium alloys, or where solder is present. Safety. CorroSoak is not classified as hazardous. Read Material Safety Data Sheet before use. Avoid contact with skin and eyes and avoid breathing vapours. The wearing of rubber gloves is recommended when handling this product. Uses: Industrial Products. Product ID: 543. Categories: Industrial Products. | Western Australia |
Davidsons Plum Powder - Australian Native Extract (Bulk) Quick enquiry Where to buy Suppliers range | Davidson's Plum is a rainforest tree found in Queensland and Northern NSW that bears dark purple fruit with vibrant red flesh. This fruit is high in the anthocyanin group of anti-oxidants and polysaccharides which provide anti-ageing benefits and significant hydration for the skin. The phytochemicals in this extract are freeze dried after harvesting to maintain their efficacy and freshness. Botanical Name: Davidsona pruriens. Common Name: Davidson's Plum. Traditional Name: Ooray (Yirrganydji people of Northern Queensland who speak Djabugay language). Powdered Extract Strength: 10:1. Appearance: this is a dark purple powdered extract that has a high but incomplete solubility in water. This means that it is best to hydrate and filter this before adding it to your cosmetic product. Applications: Use as an active ingredient in skincare products. Particularly well suited for anti-ageing products. Usage Instructions: The powder is 10 times stronger than the fresh fruit so to make a re-constituted fruit juice you would need a mix of 10% powder into 90% demineralised water + preservative (for maintaining the freshness). The powder is highly water soluble but it is always a good idea to filter any extracts before using them in a finished product to remove any solids or un-dissolved powder. Group: Extracts. Alternative Names: Davidsonia Jerseyana Fruit Extract. EINECS: 920-206-2 [ECHA]. CAS No. 1174401-42-3. Pack Sizes: 15G; 100G; 500G; 1KG; 5KG and above upon request. Product ID: EXANDAVIPLUM. If you do make a reconstituted liquid as per above, we recommend using this in your product at anything from 1-50% of your formula.If you want to go ahead and add the powder directly to your formula you could use it at between 0.1-5% but do remember that it required moisture to rehydrate and so will not mix into an oil based product. It can be added dry to powdered clay masks or colour cosmetics if you wish. | Worldwide |
Electrical Safety Solvent Quick enquiry Where to buy Suppliers range | ELECTRICAL SAFETY SOLVENT is a concentrated solvent cleaner for degreasing electrical equipment, metal parts and pipework. This product is compatible with most plastics and elastomers and is formulated to clean and leave no residue which may cause electrical conductivity. This specialty cleaning product is a NON-CORROSIVE and NON-CONDUCTIVE and does not contain hydrofluorocarbon (HFCs). This product can be used to remove oils, grease, resins, cutting oils, gear oils, vacuum oils, waxes, mineral oils and a variety of other soils from most surfaces. Ideal for precision and specialty cleaning jobs like cleaning high value equipment, electrical components and circuit boards. Use as you would use a solvent cleaner. Apply to electrically isolated equipment that is at room temperature. Apply via spray pack, immersion/dipping tank or any other safe method and allow. The soil should dissolve into solution and be rinsed away by product. After cleaning allow components to air dry for maximum non - conductivity. Pack Sizes: 5 Litre, 20 Litres. Product ID: AC801. Chemicals By Industry, Workshop. | Australia Wide |
EMULSIPHOS 677660 Quick enquiry Where to buy Suppliers range | Acts as an O/W emulsifier. It is a non-ethoxylated phosphate emulsifier based on vegetable and mineral raw materials. Allows the preparation of homogeneous, stable, light skin care and sun care emulsions. It is an analogue of the natural phospholipids in the skin (e.g. lecithin) and provides a smooth and soft skin feel. Possesses good solubility and emulsifying ability with both polar and non-polar oils. Can be used over a wide pH range (4-9), but preferably at the acidic pH level of the skin and easily be added either to the oil phase or the aqueous phase of the emulsion. Works well for formulations containing water soluble sun screen filters and micronized pigments. Provides excellent stability and skin feel even for sun care emulsions with very high sun protection factors (50+). Ethylene oxide- & cetyl chloride-free. Recommended for manufacturing emulsions with a high oil content. Uses: Skin care (Facial care, Facial cleansing, Body care, Baby care) Sun care (Sun protection, After-sun, Self-tanning). Group: Personal Care; Cosmetic Raw Materials; Emollients. Alternative Name: Potassium Cetyl Phosphate, Hydrogenated Palm Glycerides. Grade: Cosmetic Ingredients. CAS Number: 84861-79-0, 91744-66-0. Pack Sizes: 250g, 500 grams, 1kg, 5 kgs, 10kg, 20kg. | Australia & Worldwide |
Eucalyptus Peppermint Aromatique Hand Wash Quick enquiry Where to buy Suppliers range | Experience true nature in your bathroom, kitchen or laundry with the relaxing scents of this Eucalyptus and Peppermint liquid hand soap. Pure & gentle and suitable for sensitive skin types, leaving your hands feeling moisturised. This liquid soap is PALM FREE. Contains No surfactants or additives. Free of: Parabens, Sulfates, Mineral Oil, Phthalates, Formaldehyde, PEGs and also Gluten Free, Non-GMO, Cruelty Free ~ NOT TESTED ON ANIMALS & Suitable for Vegans. Ingredients: Purified water (Aqua), 100%, Pure Wattle Grove Eucalyptus Oil, Certified Organic Peppermint Oil, Potassium Oleate (soap from Sunflower Oil), Potassium Cocoate (soap from coconut), Glycerine (from Coconut), Potassium Citrate, and Citric Acid. 500ml lotion pump with twist lock PET plastic amber bottle. Group: Liquids. Product ID: WGEPHW500AMB. Eucalyptus Peppermint Aromatique Hand Wash, Hand Wash, Hand Soap. Wattle Grove Eucalyptus Oil. Wattle Grove Eucalyptus Oil. | South Australia |
Eucalyptus Rosemary Hand Cream Quick enquiry Where to buy Suppliers range | A non greasy formulation of certified organic plant based ingredients with our 100% Wattle Grove Eucalyptus Oil. Naturally soothing, softening and deeply hydrating for the hands and cuticles while leaving them softly scented. Use: Apply to clean skin, gently massaging until active ingredients are absorbed. Ingredients: Aloe Barbadensis Leaf Juice , Cetearyl Olivate, Butyrospermum Parkii Butter , Glycerin, Sorbitan Olivate, Simmondsia Chinensis Seed Oil , Theobroma Cacao Seed Butter , Beeswax , Cetearyl Alcohol, Water, Wattle Grove Eucalyptus Oil, Rosmarinus Officinalis Leaf Oil, Rosa Eglentaria Seed Oil , Oenothera Biennis Oil , Tocopherol - Natural, Citrus Paradisi Peel Oil, Potassium Sorbate, Litsea Cubeba Fruit Oil , Lactic Acid, Glycine Soja Oil, Backhousia Citriodora Oil Denotes Certified Organic Contains No: Sulfate, Paraben, Lanolin, Mineral oil, Artificial colour, Artificial fragrance , SLS or Petrochemical. 100ml black tube. (These tubes are 100% recyclable). Group: Creams. Product ID: WGHC100BK. Eucalyptus Rosemary Hand Cream, Hand Cream, Cream, Wattle Grove Cream. Wattle Grove Eucalyptus Oil. Wattle Grove Eucalyptus Oil. | South Australia |
Eyewash Preservative Concentrate Quick enquiry Where to buy Suppliers range | EYEWASH PRESERVATIVE CONCENTRATE is an antibacterial concentrate with humectant for preserving and treating portable eyewash water reservoirs for up to 6 months. Use concentrate with either Potable / Mains Water. 250ml of concentrate treats 35 litres of Potable Water - Demineralised Water (Order Code: AC305DM) only. In warmer environments we recommend changing eyewash solutions every 4 months and in colder climates every 6 months. Eyewash preservative concentrate is best used before 3 years of purchase or 12 months from opening. Do not use product if the protective foil seal or tamper evident cap seal is broken upon receipt. For testing active in residual product use the TEST KIT. Pack Sizes: 500M Litre, 5 Litre, Test Strips. Product ID: WC0446. Chemicals By Industry, Laboratory, Chemicals By Industry, Mining. | Australia Wide |
Fluorseal Quick enquiry Where to buy Suppliers range | Fluorseal: ANTI-STAIN SEALER FOR MASONRY This unique water-based product provides a durable transparent protective barrier against oil and water on concrete and other porous masonry or mineral surfaces. Categories: Industrial, Cleaning, Agricultural, SEALER FOR MASONRY | Western Australia |
Foam Chlor - Chlorine Sanitiser Quick enquiry Where to buy Suppliers range | FOAM CHLOR is chlorine-based liquid detergent/sanitiser formulated. REFRIGERATION CONTAINERS: Use from 1 part product to 20 parts water or as required dilution rates to remove different types of mineral and animal based soils. KITCHENS: For tables, cutting boards, bench-tops, tiled and stone floors, wash with FOAM CHLOR at 1:50 dilution. Leave for 5 - 10 minutes then rinse. BATHROOMS: FOAM CHLOR may be used to clean mould, soap scum, etc. from shower recesses and surrounding areas. Apply at 1:20 dilutions to the surface, leave for 5 minutes then rinse clean, using a brush if necessary. Ensure adequate ventilation in confined areas. ALGAE AND SLIME REMOVAL: For removing algae and mould from concrete, mortar and roof tiles, use 1 part FOAM CHLOR per 20 parts of water. Apply liberally to the surface and leave for at least 30 minutes. Brush off dead algae and hose with water. LAUNDRY: For bleaching, white clothes, immerse in a 1:500 solution of FOAM CHLOR (2ml per litre). Soak for 2 - 3 hours or overnight, then rinse then wash. For baby nappies, remove soils matter and soak for 2 hours in FOAM CHLOR at 1:100 dilutions. Pack Sizes: 5 Litre, 20 Litres, 205 Litre Drums. Product ID: AC410. Chemicals By Industry, Food & Beverage Processing. | Australia Wide |
Ghassoul Clay (Bulk) Quick enquiry Where to buy Suppliers range | Name/s: Ghassoul, Rhassoul, Moroccan Red Clay. Appearance: Fine, silky, pale grey powder with a hint of pink-brown. Odour: Earthy with a hint of fresh wood. Solubility: Not soluble - use in suspension. Description: A delightfully unique and luxuriant superfine clay powder which is nutrient dense and rich in minerals such as Silica, Magnesium, Calcium, etc. It is highly esteemed around the world in exclusive professional spas for the cleansing, nourishing, exfoliating and rejuvenating properties. Ghassoul comes from the Arabic word "ghassala", meaning "to wash". When moistened with water, or floral water, the feel on the skin is smooth and almost lubricating whilst also exfoliating and drawing. It feels almost as if soap has been applied, but without foaming - the perfect way to cleanse the face, body, or even hair, without soap or chemical surfactants. Benefits: High mineral content - especially silica which is known to help tone the skin and improve resilience. High absorption ratio - superior detoxifying and drawing. Excellent Ion Exchange Ratio - to further facilitate cleansing and deodorizing action. Gentle and softening to the skin, including sensitive. Highly efficient at absorbing excess oils from the skin and scalp. Group: Clay. Alternative Names: Moroccan Lava Clay. EINECS: Not allocated. CAS No. 12199-37-0 [AICIS]. Pack Sizes: 100G; 500G; 1KG; 5KG; 25KG and above upon request. Product ID: CLAYGHAS. Possible Uses:General Properties: Abrasive [superfine]; Absorbent; Anticaking Agent; Bulking Agent; Opacifying Agent.Colour Cosmetics Additive: Blushers [all types]; Eyeliners; Eyebrow pencils; Face powders; Lipsticks; Rouges; Powders [Dusting and Talcum, excluding aftershave talcs]; Foundations; Makeup bases; Makeup fixatives; Mascara.Skin and Hair Care Preparations: Paste masks [Mud packs]; Hair powder [Dry shampoo]; Shampoos [Non-colouring]; and other Hair grooming aids; Bath preparations; Body and Hand preparations [Excluding shaving preparations]; Hair preparations [non-colouring]; Hair conditioners; Cleansing products [Cold creams, cleansing lotions]; Manicuring preparations; Men's Talcum. | Worldwide |
Green French Clay (Bulk) Quick enquiry Where to buy Suppliers range | A conditioning and nourishing clay for all skin types. Green French Clay is especially useful in formulas for sebum control. Great for face and body masks. Green French Clay has a mixed mineral origin: Kaolinite or kaolin clays can be coloured if the surrounding soil is rich in minerals. Some of these minerals have beneficial properties for the skin while others don't so much. All Kaolinites are reasonably good drawing agents as they pull toxins from the skin. Kaolin is often used as a base for clay masks due to it being well tolerated by most people. Illite is a mica type mineral occurring in argillaceous sediments with Illite being a general term for the clay minerals from this type of sediment. Argillaceous minerals appear silver-like due to their fine grain structure and trace metal constituent. Montmorillonite is a very soft phyllosilicate (silicate minerals making up 90% of the crust of the earth based on silicone and oxygen) that forms in microscopic crystals. The name Montmorillonite is a French name as it is named after a place where the clay was made famous. It is a smectite clay - smectite refers to the way the crystal sheets of the clay hold together. These clays are cationic and have a cationic exchange capacity due to the Magnesium and Aluminium in the structure. These clays swell in water and can be used to thicken and stabilise emulsions. This clay will swell a little in water. 100% natural mineral which is allowed to be used in COSMOS formulas. Appearance: Light green fine powder. Manufacturing Process: The clay undergoes a mechanical treatment, without any chemical process. It is crushed and dried. Formulation Tips: 5 - 40% in masks. Blends well with other clays. For best results, wet into the water phase prior to the addition of thickeners or oil phase. Can be added to a finished emulsion with good homogenisation. Homogenisation is recommended. Group: Clay. Alternative Names: Illite, Kaolin, Montmorillonite, Aqua. EINECS: 601-803-4, , 310-194-1, 215-288-5, 231-791-2. CAS No. 12173-60-3 [PCPC; CosIng], 68476-25-5 [AICIS], 1332-58-7, 1318-93-0, 7732-18-5. Pack Sizes: 100G; 500G; 1KG; 5KG; 20KG and above upon request. Product ID: CLAYFRGRN. Incompatibilities: Dissolves in highly acidic and highly alkaline solutions.Note: Green French Clay does | Worldwide |
Hemp Oil Quick enquiry Where to buy Suppliers range | Cold Pressed Hemp oil has gained popularity as a potent ingredient in the cosmetics industry due to its exceptional skincare benefits and natural properties. Extracted from the seeds of the hemp plant, hemp oil is rich in essential fatty acids, antioxidants, vitamins, and minerals that make it a valuable addition to various cosmetic products. Uses: Moisturizing Properties: Hemp oil is a natural emollient, meaning it has excellent moisturizing properties. When applied to the skin, it forms a protective barrier that locks in moisture, preventing dehydration and promoting soft, supple skin. This makes it particularly useful for dry, sensitive, or mature skin. Group: oils. Pack Sizes: 1L, 5 Litres. | |
HEPTYL UNDECYLENATE Quick enquiry Where to buy Suppliers range | It acts as an emollient. It is a natural alternative to synthetic fluids such as cyclomethicone and mineral oils. It can be combined with natural oils to reduce the greasiness of such materials. This extremely light and dry emollient is 100% natural, eco-certified and is derived from castor oil. It can be used in sunscreens, moisturizers, lotions, make-up and antiperspirants. Uses: Creams, Lotions, Gels; Decorative cosmetics/Make-up; Skin care (Facial care, Facial cleansing, Body care, Baby care) - (Moisturizing Creams; Lotions); Sun care (Sun protection, After-sun, Self-tanning); Toiletries (Shower, Bath, Oral care) - (Antiperspirants, Deodorants). Group: Raw Materials; Emollients; Moisturizing Agents. Alternative Name: Heptyl Undecylenate. Grade: Cosmetics. CAS Number: 68141-27-5. Pack Sizes: 250g, 500 grams, 1kg, 5 kgs, 10kg, 20kg. Similar to: LexFeel Natural (Inolex Inc.;, Cosphaderm Touch (Cosphatec GMBH). | Australia & Worldwide |
Hydrochloric Acid 32% - AC591 Quick enquiry Where to buy Suppliers range | HYDROCHLORIC ACID 32% (HCL) is an industrial strength acid commonly used for the removal of scale, lime, calcium, oxides, efflorescence, bore stains, concrete dust and hard water deposits. NOTE: this is a higher grade hydrochloric acid than the "spent / recovered" type normally found at your local pool shop or hardware store. This product is generally used at concentration from 1:5 to 1:10 parts water depending on application. The product can be used via immersion, swab or recirculation techniques. The time taken to descale most items is approximately 5 to 10 minutes. Such a wide time span is given because results vary depending primarily on scale type and build up, dilution ratio and temperature. Once a surface has been cleaned always flush with copious amounts of water to removal all acid residues. TIPS: Before using the product ensure the surface has been pre-cleaned with appropriate cleaner to remove unwanted oil, grease and film. If the surface is porous (ie bore stain on brick wall) then the surface should be well wetted to avoid acid being wicked into the surface and creating a white haze in the days following, as minerals are leached to the surface. Once a surface has been cleaned the acid should be washed off as soon as possible with copious amounts of water. Repeated acid washing may damage some surfaces. This product may etch, lighten or alter the color of tile, grout, stone and metal surfaces. Allow all new grout, concrete, cement or masonry to cure per manufacturers specification before using. Pack Sizes: 5 Litre, 20 Litres, 200 Litre, 1000 Litres. Product ID: AC591. Chemicals By Industry, Brick & Concrete Cleaning, Chemicals By Industry, Building & Construction, Chemicals By Industry, Marine, Chemicals By Industry, Pools & Recreation. | Australia Wide |
Inhibited HCL Descaler - Industrial Acid Cleaner Quick enquiry Where to buy Suppliers range | strong>INHIBITED HCL DESCALER is a industrial acid cleaner that consists of penetrants, metal protectors and corrosion inhibitors along with ~32% Hydrochloric Acid. This product is used industrially to remove scale, lime, calcium, oxides, efflorescence, uric acid, bore stains, concrete dust and hard water deposits from a variety of surfaces. It is also Ideal for cleaning heat exchangers, removing rust and concrete from ship holds, descaling boilers and lines, bore stain removal, concrete clean-up, and as a heavy duty machinery cleaner for concrete trucks and alike. This product is generally used at concentration from 1:5 to 1:20 parts water depending on application and it is highly recommended that the user application trial/s in an inconspicuous area prior to tacking the larger job at hand. The product can be used via immersion, swab or re circulation techniques. The time taken to descale most items is approximately 10-60 minutes. Such a wide time span is given because results vary depending primarily on scale type and build up, dilution ratio and temperature. Once a surface has been cleaned always flush with copious amounts of water to removal all acid residues. TIPS: Before using the product ensure the surface has been pre cleaned with appropriate cleaner to remove unwanted oil, grease and film as. If the surface is porous (i.e. bore stain on brick wall) then the surface should be well wetted to avoid acid being wicked into the surface and creating a white haze in the days to following as minerals are leached to the surface. Repeated acid washing may damage some surfaces. This product may etch, lighten or alter the color of tile, grout, stone and metal surfaces. Allow all new grout, concrete, cement or masonry to cure per manufacturers specification before using. GUIDELINE DILUTIONS. Coloured Bricks: 1 part HCL Descaler to 20 parts water i.e dark bricks. Non Coloured Bricks: 1 part HCL Descaler to 10 parts water (lightly coloured bricks). Heat Exchangers & Boilers: As required. Ship Hold: 1 part HCL Descaler to 30 parts water. Pack Sizes: 5 Litre, 20 Litres, 200 Litre, 1000 Litres. Product ID: AC5915. Chemicals By Industry, Brick & Concrete Cleaning, Chemicals By Industry, Building & Construction, Chemicals By Industry, Marine, Chemicals By Industry, Mining. | Australia Wide |
MIGLYOL COCO 810 (COCO-CAPRYLATE/CAPRATE) Quick enquiry Where to buy Suppliers range | Act as an emollient and refatting agent. It is 100% natural ingredient and has non-polar character. It can be considered a true vegetable alternative for light petrochemical based emollients like IPM, mineral oils or silicones (e.g. D5). Due to its extremely light skin feel and fast spreading, it provides dry, non-oily skin feel and low-medium pigment dispersion. It is non-oxidisable and odorless. It creates an elegant, silky smoothing film on the skin that will not dominate over the medium spreading oils in the formulation. It decreases heavy and greasy skin feel of slow spreading oils and will benefit the formulation with a long-lasting care effect. Used in face care, baby care, massage oil, hand cream, lip products and natural cosmetics. ECOCERT and RSPO MB certified. Uses: Skin care (Facial care, Facial cleansing, Body care, Baby care); Hand creams, Lotions, Massage Products, Body Oils. Group: Raw Materials; Emollients. Alternative Name: Coco-Caprylate/Caprate. Grade: Cosmetics. CAS Number: 95912-86-0. Pack Sizes: 500 grams, 1kg, 5 kgs, 10kg, 20kg. Similar to: Cetiol C 5C (BASF Corporation). | Australia & Worldwide |
Organic Fulvic Humic Acid Liquid Concentrate Natural Mineral Nutrient Supplement Quick enquiry Where to buy Suppliers range | Our Fulvic Humic Concentrate is a natural and powerful organic concentrate, sourced from New Mexico, amongst the world best quality, highest in mineral content and potency. Its high pH level means it is more bioavailable to the body. Fulvic Humic is known for its many health properties, and can be used as a complimentary food supplement. Information on our Fulvic Humic Concentrate (FHC). The Humates we supply are among the worlds best quality coming from New Mexico and are especially selected on site. Our Leonardite is of superior quality, is free of heavy metals loaded with Humic acids (min. 70%-80%max). Humates also supply trace elements, amino acids and plant derived nutrients that are often deficient in the soil, from modern farming practices. Humic substances are broken down into humic acid, and fulvic acids. The Fulvic fraction/component in our Organic Leonardite is approx 30%, perhaps the highest available in the world. Research into humic and fulvic acids have found them to be very beneficial, if not vital for human health, animal health and the health of the soils that grow the pastures for animals and or horticultural/agricultural crops hence the food we eat. This product is originally sourced from an organic certified supplier. Pack Sizes: 25ml, 30ml, 100ml, 500ml, 1L. Product ID: FULVIC_HUMIC_CONCENTRATE_1ML. | |
OZOKERITE WAX PASTILLES Quick enquiry Where to buy Suppliers range | Thickener used in emulsions. Ozokerite Waxes is predominantly complex hydrocarbons formulated into specialty waxes, custom blended to the customer's needs. They are consistent and reproducible from batch to batch, with specific properties critical to the formulator, including melt point, hardness, viscosity, penetration, gel strength and color. Ozokerite Waxes are compatible with most animal, vegetable and mineral waxes, as well as mineral oils and petrolatums. Uses: Toiletries (Shower, Bath, Oral care) Decorative cosmetics/Make-up Hair care (Shampoos, Conditioners, Styling) Skin care (Facial care, Facial cleansing, Body care, Baby care) Sun care (Sun protection, After-sun & Self-tanning). Group: Raw Materials; Thickeners; Waxes. Alternative Name: Ozokerite. Grade: Cosmetic Ingredients. CAS Number: 12198-93-5. Pack Sizes: 500 grams, 1kg, 5 kgs, 10kg, 20kg. | Australia & Worldwide |
PU OIL Protech ATF Universal Quick enquiry Where to buy Suppliers range | ATF UNIVERSAL is the latest generation in automatic transmission fluid technology, and has been developed to cover a wide range of specific vehicle applications. ATF UNIVERSAL utilizes premium highly stable mineral base oil and new generation automatic transmission fluid additive technology to improve transmission durability, shift performance and minimize transmission shudder. It provides excellent oxidization and thermal stability resulting in superior wear protection. Features and Benefits. Anti shudder durability for smooth shifting performance. Enhanced wear protection. Semi Synthetic base oil for added performance and extended service life. . Approvals / Recommendations. HONDA Z1. ALLISON C-4. ZF TE-ML-14A. VOLVO 97341. BTR 5M-52 (FORD 95LE). VOITH H55.6335.XX. MAN 339 TYPE V-1, Z-1. MITSUBISHI SP-II AND SP-III. MB, VW AND BMW 4 AND 5 SPEED AUTOMATICS. JASO 1-A. TOYOTA T-III, T-IV. FORD MERCON V. NISSAN MATIC D & J. CATERPILLAR TO-2. Many other common ATFs. Typical Inspection. CHARACTERISTICS. UNIVERSAL. Specific gravity at 15 C. 0.8673. Kinematic viscosity at 40 C, mm2/s (cSt). 41.30. Kinematic viscosity at 100 C, mm2/s (cSt). 8.0. Viscosity index. 170.0. Colour. RED. Uses: Performance Oils. Product ID: 316. Categories: Performance Oils. | Western Australia |
PU OIL Protech Auto Trans Fluid 95LE Quick enquiry Where to buy Suppliers range | Protech TRANS FLUID 95LE. Features and Benefits ATF 95LE is a special purpose automatic transmission fluid for late model Ford automatic transmissions. KM175 and KM 177 automatic transmissions fitted to Mitsubishi Magnas from January 1998, and all Hyundai. automatic transmissions. Ensures full transmission functionality, offering excellent gear durability, good shift feel on cold start and at. operating temperature, giving excellent thermal and chemical stability. Compatible with all gaskets and seals. Miscible with all mineral oil and synthetic oil, thus requires no flushing. Applications. For BTR M95LE four speed automatic transmissions as fitted to the 8 and 6 cylinder Ford Falcon EB, Fairlane. NC and LTD DC and subsequent models and BTR M85LE four speed automatic transmissions fitted to Series. Two 6 cylinder Ford Falcon EA, Fairlane NA and LTD DA model passenger cars and for KM175 and KM177. automatic transmissions fitted to Mitsubishi Magnas including TR, TS, TE and TF Magna, KR, KS, KE and KF. Verada, HJ Galant, UF Nimbus and CE Lancer. As well as all Hyundai automatic transmissions. Approvals / Recommendations. BTR 5M-52 85LE & 95LE. MMAL ES-X64022SP2. Hyundai Part number 05243-33000. Uses: Performance Oils. Product ID: 325. Categories: Performance Oils. | Western Australia |
PU OIL Protech Gear Oil 75W 90 GL5 Quick enquiry Where to buy Suppliers range | Protech GEAR OIL 75W/90. GEAR OIL 75W/90 Semi Synthetic, multigrid, multipurpose, automotive gear oil with outstanding high. temperature, high shear stability and performance, plus excellent low temperature fluidity. Features and Benefits. Particularly suited to modern, manual gear boxes as used in late model vehicles. Can be used whenever SAE 75W, 80W, 85W, 90W and 80W/90 viscosity grades are specified. Protects gears against wear and scuffing. Easy cold-start gear changes. Light and easy gear shifting and noise control. Improved fuel economy. High resistance to oxidation, corrosion and foaming. Mixes with mineral gear oils. Improved protection in high-load, high shear stress and high-temperature applications. Applications. GEAR OIL 75W/90 Recommended for front wheel drive transaxle gear boxes and other manual transmissions. For modern car, SUV and light commercial manual transmissions where manufacturers call for a GL-4 or GL-5. SAE 75W-90 viscosity gear lubricant. Approvals / Recommendations. API GL5. MIL-L-2105 C. GENERAL MOTORS HN 2013, 1820, 1046,1070. FORD ESW M2C-83A/B/C. BTR 5M-42(80). MACK GO-G. Uses: Performance Oils. Product ID: 313. Categories: Performance Oils. | Western Australia |
PU OIL Protech Hydraulic 46 Quick enquiry Where to buy Suppliers range | Protech HYDRAULIC OIL 46. Protech Hydraulic Oils are mineral oil based and are manufactured in a range of viscosity grades to meet the. requirements of manufacturers for rust and oxidation - inhibited and anti -wear mineral-oil Hydraulic fluids. They. are compatible with the seal materials commonly used in Hydraulic Oil systems. These Oils are primarily for use. in Hydraulic Oils equipment, but are suitable for other duties in which lubricants with good oxidation stability and. lubrication performance are required. Features and Benefits. Outstanding thermal and oxidation stability and good service life. Good anti-wear properties and rust inhibitor. Superior hydrolytic stability and excellent demulsibility. Compatible with the seals commonly used in Hydraulic Oils systems. Approvals / Recommendations. Meets the specification requirements of. DIN 5152 Part 2, ISO Type HM. Sperry Vickers 35VQ25. Cincinnati Milacron P-68. P-69, P-70 Denison HF) and HF2. Uses: Performance Oils. Product ID: 335. Categories: Performance Oils. | Western Australia |
PU OIL Protech Hydraulic Oil 32 Quick enquiry Where to buy Suppliers range | Protech HYDRAULIC OIL 32. Protech Hydraulic Oils are mineral oil based and are manufactured in a range of viscosity grades to meet the. requirements of manufacturers for rust and oxidation - inhibited and anti -wear mineral-oil Hydraulic fluids. They. are compatible with the seal materials commonly used in Hydraulic Oil systems. These Oils are primarily for use. in Hydraulic Oils equipment, but are suitable for other duties in which lubricants with good oxidation stability and. lubrication performance are required. Features and Benefits. Outstanding thermal and oxidation stability and good service life. Good anti-wear properties and rust inhibitor. Superior hydrolytic stability and excellent demulsibility. Compatible with the seals commonly used in Hydraulic Oils systems. Approvals / Recommendations. Meets the specification requirements of. DIN 5152 Part 2, ISO Type HM. Sperry Vickers 35VQ25. Cincinnati Milacron P-68. P-69, P-70 Denison HF) and HF2. Uses: Performance Oils. Product ID: 333. Categories: Performance Oils. | Western Australia |
PU OIL Protech Hydraulic Oil 68 Quick enquiry Where to buy Suppliers range | Protech HYDRAULIC OIL 68. Protech Hydraulic Oils are mineral oil based and are manufactured in a range of viscosity grades to meet the. requirements of manufacturers for rust and oxidation - inhibited and anti -wear mineral-oil Hydraulic fluids. They. are compatible with the seal materials commonly used in Hydraulic Oil systems. These Oils are primarily for use. in Hydraulic Oils equipment, but are suitable for other duties in which lubricants with good oxidation stability and. lubrication performance are required. Features and Benefits. Outstanding thermal and oxidation stability and good service life. Good anti-wear properties and rust inhibitor. Superior hydrolytic stability and excellent demulsibility. Compatible with the seals commonly used in Hydraulic Oils systems. Approvals / Recommendations. Meets the specification requirements of. DIN 5152 Part 2, ISO Type HM. Sperry Vickers 35VQ25. Cincinnati Milacron P-68. P-69, P-70 Denison HF) and HF2. Uses: Performance Oils. Product ID: 336. Categories: Performance Oils. | Western Australia |
Red Brazilian Clay (Bulk) Quick enquiry Where to buy Suppliers range | Use Level : 0-30. Medium Particle Diameter : 15 microns. Properties : Its polysilicate structure allows it to absorb and adsorb water and oil based substances. It has a cationic exchange capacity which helps in the removal of dirt from the skin. Natural source of magnesium, copper, zinc and selenium. Water Absorbtion : 70%. Oil Absorbtion : 88%. Benefits : Detox capacity, hair cuticle benefits, stabilizing of emulsions, improve feel of emulsions, reduces oiliness, natural pigment. Origin : Brazil. Cleanliness : Non-irradiated clay, purified by grinding and ozone treatment to reduce bio-count to a maximum of 100 CFU/g. Asbestos tree and crystaline silica-free. Application : Natural Colourant for all cosmetic types, haircare, cleansing, oil removing. What makes Brazilian Clay different?. Clay is the bi-product of the weathering of rocks or soil over time. During the time it takes for rocks to break down the clay can also take up organic matter from plants and animals that share its environment. This combination produces clays that can have a myriad of properties and chemistries, clays that can go on to fulfil a huge range of functions in our skin care. Brazilian clays are said to have the highest mineral potential in the world thanks to the rich environmental conditions they have been form in, namely a mixture of ancient mountainous ranges and deep sedimentary basins. The largest basin, accounting for 40% of the whole South American continent, is drained by the Amazon and its tributaries with the Parana system, covering 14.5% of Brazil being another basin of significance. It is from within these basins that our Brazilian clay is harvested. Brazil's rich soil diversity shows traces of volcanic ash and minerals dating back thousands of years and enriching the clay with minerals such as iron oxides, magnesium salts and calcium among others. These minerals are just part of what makes Brazilian clay so fantastic for a range of skincare applications. Group: Clay. Alternative Names: Kaolin, CI 77491, Humus. EINECS: 310-194-1, 215-168-2, Not allocated. CAS No. 1332-58-7, 1309-37-1, Not allocated. Pack Sizes: 100G; 500G; 1KG; 5KG; 20KG and above upon request. Product ID: CLAYBRARED. Functionality:Re mineralising the skin.Oil Control.Natural Colourant.Face and Body Masks. | Worldwide |
SILFAX T1: Sulphosuccinates Quick enquiry Where to buy Suppliers range | SILFAX T1: Active Matter: 45. Water %Content: 27. Ester %Alcohol Base: Pentanol. Co-Solvent: Ethanol. The flexible functionality of the sulphosuccinate chemistry results in a wide range of applications: Mining: Mineral flotation / Slurry filtration / de-watering; Textile: Wetting agent; Leather: Wetting agent; Emulsion: SBR latex manufacture; Polymerisation: Acrylic resins manufacture; Agrochemicals: Dispersing & Wetting Concentrates; Personal Care: Wetting & Foam booster; Paints, Lacquers: Wetting Agents & Emulsifier; Inks: Dispersing agent, rheology modifier; Textiles: Wetting, Emulsifying, Antistatic; Petroleum: Emulsifier; Metal Treatment: De-watering of mineral oils; Photographic Chemicals: Emulsifying & Wetting; Environmental Cleaning: Dispersant for oil spills.. Categories: Sulfosuccinates, Surfactants | Victoria |
SILFAX T2: Sulphosuccinates Quick enquiry Where to buy Suppliers range | SILFAX T2: Active Matter: 60. Water %Content: 29. Ester %Alcohol Base: 2-Ethyl hexanol. Co-Solvent: Ethanol. The flexible functionality of the sulphosuccinate chemistry results in a wide range of applications: Mining: Mineral flotation / Slurry filtration / de-watering; Textile: Wetting agent; Leather: Wetting agent; Emulsion: SBR latex manufacture; Polymerisation: Acrylic resins manufacture; Agrochemicals: Dispersing & Wetting Concentrates; Personal Care: Wetting & Foam booster; Paints, Lacquers: Wetting & Emulsifier; Inks: Dispersing agents, rheology modifiers; Textiles: Wetting, Emulsifying, Antistatic; Petroleum: Emulsifier; Metal Treatment: De-watering of mineral oils; Photographic Chemicals: Emulsifying & Wetting; Environmental Cleaning: Dispersant for oil spills.. Categories: Sulfosuccinates, Surfactants | Victoria |
SILFAX T3: Sulphosuccinates Quick enquiry Where to buy Suppliers range | SILFAX T3: Active Matter: 70. Water %Content: 21. Ester %Alcohol Base: 2-Ethyl hexanol. Co-Solvent: Ethanol. The flexible functionality of the sulphosuccinate chemistry results in a wide range of applications: Mining: Mineral flotation / Slurry filtration / de-watering; Textile: Wetting agent; Leather: Wetting agents; Emulsion: SBR latex manufacture; Polymerisation: Acrylic resins manufacture; Agrochemicals: Dispersing & Wetting Concentrates; Personal Care: Wetting & Foam booster; Paints, Lacquers: Wetting & Emulsifiers; Inks: Dispersing agents, rheology modifier; Textiles: Wetting, Emulsifying, Antistatic; Petroleum: Emulsifier; Metal Treatment: De-watering of mineral oils; Photographic Chemicals: Emulsifying & Wetting; Environmental Cleaning: Dispersant for oil spills.. Categories: Sulfosuccinates, Surfactants | Victoria |
SILFAX T4: Sulphosuccinates Quick enquiry Where to buy Suppliers range | SILFAX T4: Active Matter: 73. Water %Content: 14. Ester %Alcohol Base: 2-Ethyl hexanol. Co-Solvent: Ethanol. The flexible functionality of the sulphosuccinate chemistry results in a wide range of applications: Mining: Mineral flotation / Slurry filtration / de-watering; Textile: Wetting agent; Leather: Wetting agent; Emulsion: SBR latex manufacture; Polymerisation: Acrylic resins manufacture; Agrochemicals: Dispersing & Wetting Concentrates; Personal Care: Wetting & Foam booster; Paints, Lacquers: Wetting & Emulsifier; Inks: Dispersing agent, rheology modifier; Textiles: Wetting, Emulsifying, Antistatic; Petroleum: Emulsifier; Metal Treatment: De-watering of mineral oils; Photographic Chemicals: Emulsifying & Wetting; Environmental Cleaning: Dispersant for oil spills.. Categories: Sulfosuccinates, Surfactants | Victoria |
SILFAX T5: Sulphosuccinates Quick enquiry Where to buy Suppliers range | SILFAX T5: Active Matter: 65. Water %Content: 26. Ester %Alcohol Base: 2-Ethyl hexanol. Co-Solvent: IPA/DEG. The flexible functionality of the sulphosuccinate chemistry results in a wide range of applications: Mining: Mineral flotation / Slurry filtration / de-watering; Textile: Wetting agent; Leather: Wetting agent; Emulsion: SBR latex manufacture; Polymerisation: Acrylic resins manufacture; Agrochemicals: Dispersing & Wetting Concentrates; Personal Care: Wetting & Foam booster; Paints, Lacquers: Wetting & Emulsifier; Inks: Dispersing agent, rheology modifier; Textiles: Wetting, Emulsifying, Antistatic; Petroleum: Emulsifier; Metal Treatment: De-watering of mineral oils; Photographic Chemicals: Emulsifying & Wetting; Environmental Cleaning: Dispersant for oil spills.. Categories: Sulfosuccinates, Surfactants | Victoria |
SILFAX TEH: Sulphosuccinates Quick enquiry Where to buy Suppliers range | SILFAX TEH: Active Matter: 44. Water %Content: 49. Ester %Alcohol Base: 2-Ethyl hexanol. Co-Solvent: 2-Ethyl hexanol. The flexible functionality of the sulphosuccinate chemistry results in a wide range of applications: Mining: Mineral flotation / Slurry filtration / de-watering; Textile: Wetting agent; Leather: Wetting agent; Emulsion: SBR latex manufacture; Polymerisation: Acrylic resins manufacture; Agrochemicals: Dispersing & Wetting Concentrates; Personal Care: Wetting & Foam booster; Paints, Lacquers: Wetting & Emulsifier; Inks: Dispersing agent, rheology modifier; Textiles: Wetting, Emulsifying, Antistatic; Petroleum: Emulsifier; Metal Treatment: De-watering of mineral oils; Photographic Chemicals: Emulsifying & Wetting; Environmental Cleaning: Dispersant for oil spills.. Categories: Sulfosuccinates, Surfactants | Victoria |
SILFAX TP: Sulphosuccinates Quick enquiry Where to buy Suppliers range | SILFAX TP: Active Matter: 70. Water %Content: 25. Ester %Alcohol Base: 2-Ethyl hexanol. Co-Solvent: Di-Ethylene Glycol. The flexible functionality of the sulphosuccinate chemistry results in a wide range of applications: Mining: Mineral flotation / Slurry filtration / de-watering; Textile: Wetting agent; Leather: Wetting agents; Emulsion: SBR latex manufacture; Polymerisation: Acrylic resins manufacture; Agrochemicals: Dispersing & Wetting Concentrates; Personal Care: Wetting & Foam booster; Paints, Lacquers: Wetting & Emulsifier; Inks: Dispersing agent, rheology modifier; Textiles: Wetting, Emulsifying, Antistatic; Petroleum: Emulsifier; Metal Treatment: De-watering of mineral oils; Photographic Chemicals: Emulsifying & Wetting; Environmental Cleaning: Dispersant for oil spills.. Categories: Sulfosuccinates, Surfactants | Victoria |
SILFAX TS (Hemisulfosuccinate) SILFAX-TR SERIES: Sulphosuccinates Quick enquiry Where to buy Suppliers range | SILFAX TS (Hemisulfosuccinate) SILFAX-TR SERIES: Active Matter: 33. Water %Content: 62. Ester %Alcohol Base: Ethoxylated (3E0) lauric alcohol, Variety of Alkyl Alcohols. The flexible functionality of the sulphosuccinate chemistry results in a wide range of applications: Mining: Mineral flotation / Slurry filtration / de-watering; Textile: Wetting agents; Leather: Wetting agent; Emulsion: SBR latex manufacture; Polymerisation: Acrylic resins manufacture; Agrochemicals: Dispersing & Wetting Concentrates; Personal Care: Wetting & Foam boosters; Paints, Lacquers: Wetting & Emulsifier; Inks: Dispersing agent, rheology modifiers; Textiles: Wetting, Emulsifying, Antistatic; Petroleum: Emulsifier; Metal Treatment: De-watering of mineral oils; Photographic Chemicals: Emulsifying & Wetting; Environmental Cleaning: Dispersant for oil spills.. Categories: Sulfosuccinates, Surfactants | Victoria |
Sulphuric Acid Where to buy Suppliers range | Strength: 10%, 34%, With More Than 51%, 98%. Uses: Sulfuric Acid is most commonly used in fertilizer manufacture, but is also important in mineral processing, oil refining and wastewater processing. It has a wide range of end applications including in domestic acidic drain cleaners and in the pickling process for jewellery making. Group: Type: Corrosive. Pack Sizes: Pack Sizes: 20, 200, 1000 litres. | Balcatta WA |
Sunflower Virgin Certified Organic Vegetable Oil - ACO 10282P Quick enquiry Where to buy Suppliers range | Botanical Name: Helianthus annuus. Extraction Method: Cold pressed. Description: Sunflower Oil has high Amounts of Vitamins A, B, D and E, minerals, lecithin, insulin, unsaturated fatty acids, and by all accounts, it is a good product for the skin. Color: Clear to cloudy. Common Uses: Sunflower is a versatile oil that can be used in massage, manufacturing, and in aromatherapy. Consistency: Typical and Characteristic of Carrier Oils. Absorption: Sunflower is easily absorbed and leaves very little oily residue. Certification: Australian Certified Organic. Group: Certified organic vegetable oils. Alternative Names: Helianthus Annuus Seed Oil *. EINECS: 232-273-9. CAS No. 8001-21-6. Pack Sizes: 17ml; 30ml; 100ml; 500ml; 1LT; 5Lt; 20Lt and above upon request. Product ID: OCOVSUNF. | Worldwide |
Supa Drill Foam Quick enquiry Where to buy Suppliers range | Supa Drill Foam: A concentrated biodegradable liquid formulated for use in all air drilling operations using either tri-core or hammer bits, in mineral exploration, oil, gas and groundwater industries. Including mist, foam, slug & stable (thick) foam drilling. Categories: Mining, Industrial, Foaming Agents & Drill Foams | Western Australia |
Synthetic anhydride Quick enquiry Where to buy Suppliers range | Synthetic Anhydrite MIC is an odorless, white to grey crystalline solid composed of anhydrous calcium sulfate. This product is manufactured from anhydrite, a naturally occurring mineral. It provides greater fluidity, stability, mechanical resistance, thermal conductivity and reduced dry times to cement binders such as mortars and self-levelling screeds. This product is highly hygroscopic and readily transforms to gypsum with the addition of water. Uses: Synthetic Anhydrite MIC can be used in a variety of applications in the construction industry such as drywall, cements, plasters and paint fillers. It can be used in fertilizer, paper production and as a drying agent. It is used in self-levelling soils and as a binder and stabilizer for sub-base gravel in foundations. Group: Calcium Sulfate (Plaster/ gypsum/ anhydrite). CAS No. 7778-18-9. Pack Sizes: 25 kg bags and bulk bags. Trading Locations; Sydney, Houston, Dubai, Jakarta, Ho Chi Minh City, Bangkok, Kuala Lumpur and Singapore. Categories: Anhydride synthesis. | |
Tall Oil Fatty Acid (TOFA) Quick enquiry Where to buy Suppliers range | TOFA is used in several applications and industries including, metalworking lubricants, Oil Drilling fluids - Upstream and Downstream, Foundry chemicals, paper-making industry, Mining & Mineral Chemicals and Construction chemicals. Acid Value mgKOH/kg : 180 -190. Rosin Acid: 25 - 30% | MPL Products |
Triple 2 - AQIS Degreaser Quick enquiry Where to buy Suppliers range | TRIPLE 2 is a NON-HAZARDOUS food area safe, general purpose medium duty, water based alkaline cleaner that contains high levels of detergent and solvency in one product. This product is effective on most mineral soils and deposits and is ideal for for cleaning and degreasing sensitive equipment, floor, walls, pans, vessels, decks, oil rigs, vehicles, containers and engines. TRIPLE 2 is available in large commercial bulk quantities. Use discount code GREASY15% at checkout. Valid until 30/11/2022. TRIPLE 2 is safe on aluminium, steel, acrylic paint, magnesium and most plastics. Containers dilute 1:20 Spray & Wipe Light Cleaning dilute 1:100. Upholstery dilute 1:20 Vehicles dilute 1:10. Vessels dilute 1:10 Vinyl cleaning dilute 20:1. Floor cleaning dilute 1:10 Motor Degreasing dilute 1:1. Rigs dilute 1:10 High pressure washing dilute 1.10. Prepare a diluted solution according to the extent of the contamination. Where possible use warm water as this works best. Apply by foaming unit, ventures, positive displacement pump, high pressure cleaners, mop & bucket, or sprayed directly onto surfaces using trigger sprays. Once applied allow time to dwell before agitating and then rinse off. Pack Sizes: 5 Litre, 20 Litres, 205 Litre Drums, 1000 Litres. Product ID: AC222. Chemicals By Industry, Automotive, Chemicals By Industry, Mining, Chemicals By Industry, Workshop. | Australia Wide |
VIRGIN DEODORIZED MURU-MURU BUTTER 1KG Quick enquiry Where to buy Suppliers range | Murumuru butter is white and aromatic and has the advantage of not becoming rancid easily. The quality of Murumuru butter is similar to the seed fat of the Tucuma palm and coconut palm, but it has the advantage of providing greater consistency because of its me lting point (33 C), which is superior to that of the Tucuma palm (30 QC) and coconut palm (22.7 QC). Due to its high lauric acid concentration murumuru butter can replace perfectly mineral silicon in formulations for skin products and lipsticks. It prevents against external oxidative factors forming a protective film like silicone, without harming the lipid exchange and without clogging the pores. Along with its antim icrobia l and anti-inflammatory properties, murumuru butter has a very wide range of applicabilities on skin care formulations, acting very wellon dry and even on oily skin. Recommended for moisturizing facia l creams, anti aging cream and depilatory cream. It forms easily curly hair, while nourishing and strengthening hair roots. Useful for kinky, curly or highly textured hair because of its softening ability, making the hair more supple and manageable. Highly recommended for Afro-ethnic hair care. Uses: Moisturizing Facial Creams, Anti Aging Cream, Depilatory Cream; Afro-Ethnic Hair Care. Group: Raw Materials; Butters. Alternative Name: Astrocaryum Murumuru Seed Butter. Grade: Cosmetics. CAS Number: 356065-49-1. Pack Sizes: 1KG. | Australia & Worldwide |
VIRGIN MURU-MURU BUTTER 1KG Quick enquiry Where to buy Suppliers range | Due to its high lauric acid concentration murumuru butter can replace perfectly mineral silicon in formulations for skin products and lipsticks. It prevents against external oxidative factors forming a protective film like silicone, without harming the lipid exchange and without clogging the pores. Along with its anti-microbial and anti-inflammatory properties, murumuru butter has a very wide range of applicability on skin care formulations, acting very well on dry and even on oily skin. Recommended for moisturizing facia l creams, anti-aging cream and depilatory cream. It forms easily curly hair, while nourishing and strengthening hair roots. Useful for kinky, curly or highly textured hair because of its softening ability, making the hair more supple and manageable. Highly recommended for Afro-ethnic hair care. Uses: Skin care (Anti aging cream, Depilatory cream); Hair care. Group: Raw Materials; Butters; Film Former; Anti-Microbial Agents; Anti-Inflammatory Agents; Moisturizing Agents; Hair Conditioning Agents. Alternative Name: Astrocaryum Murumuru Seed Butter. Grade: Cosmetics. CAS Number: 356065-49-1. Pack Sizes: 1KG. | Australia & Worldwide |
White French Clay (Bulk) Quick enquiry Where to buy Suppliers range | White French Clay is a great multi-purpose clay, especially useful in formulas for sensitive and dry skin types. Great for face and body masks. Kaolinite or kaolin clays are reasonably good drawing agents as they pull toxins from the skin. Kaolin is often used as a base for clay masks due to it being well tolerated by most people. 100% Natural mineral which is allowed to be used in COSMOS formulas. Appearance: White fine powder. Origin: Mineral. Particle Size: <40 micron. Manufacturing Process: The clay undergoes a mechanical treatment, without any chemical process. It is crushed and dried. Formulation Tips: 5 - 40% in masks. Blends well with other clays. For best results, wet into the water phase prior to the addition of thickeners or oil phase. Can be added to a finished emulsion with good homogenisation. Homogenisation is recommended. Group: Clay. Alternative Names: Kaolin. EINECS: 310-194-1. CAS No. 1332-58-7. Pack Sizes: 100G; 500G; 1KG; 5KG; 20KG and above upon request. Product ID: CLAYFRWHT. Incompatibilities: Dissolves in highly acidic and highly alkaline solutions.Note: White French Clay does not undergo any irradiation treatment during its manufacturing process. Therefore, this product may have a high microbial burden; preservation is recommended in water-based products.Non-GMO, Non-Nanomaterial, Palm Free, Petrochemical Free, Preservative Free, Non-Radiated, Vegan Friendly. | Worldwide |
White Oil - Food Grade Lubricant Quick enquiry Where to buy Suppliers range | WHITE OIL is a highly refined, light mineral oil product that meets the US Food Codex specifications and complies with US FDA regulations for indirect food additives (21CRF178.3620). Use neat or as required as a lubricant on machinery and lines. Suitable for machinery in direct food contact. Also used as a "natural" insecticide for controlling aphids on roses and plants when sprayed directly on insects (suffocates insects). Pack Sizes: 5 Litre, 20 Litres. Product ID: WC637. Chemicals By Industry, Abattoir, Chemicals By Industry, Food & Beverage Processing. | Australia Wide |
XANTHAN GUM Quick enquiry Where to buy Suppliers range | Widely used rheology control agent for aqueous systems. Increases viscosity, helps stabilize emulsions, and prevents settling of solids. Suspending agent. Emulsion stabilizer. Uses: Toiletries (Shower, Bath, Oral care) Hair care (Shampoos, Conditioners, Styling). Group: Raw Materials; Thickeners. Alternative Name: Xanthan Gum. Grade: Cosmetic Ingredients. CAS Number: 11138-66-2. Pack Sizes: 250g, 500 grams, 1kg, 5 kgs, 10kg, 20kg. Similar to: Vanzan NF (Vanderbilt Minerals, LLC), Keltrol CG T (CP Kelco). | Australia & Worldwide |
Zinc sulfate Quick enquiry Where to buy Suppliers range | Zinc sulphate monohydrate is a white free-flowing powder that is soluble in water and alcohol. Zinc Sulphate Heptahydrate is a white crystalline solid that is readily water soluble. Zinc deficiencies can occur on a wide variety of soil types and zinc availability is highly pH dependent. Bisley supplies 21% and 22% zinc grades. Uses: Zinc Sulphate Heptahydrate is used as a fertilizer to supplement zinc in plants that is suitable for foliar application, fertigation and hydroponics. It can also be used as a depressant of zinc and pyrite minerals in mineral flotation. It can be used in textiles, paint and tanning industries. Group: Agriculture. CAS No. 7446-20-0. Pack Sizes: 25 kg. Trading Locations; Sydney, Houston, Dubai, Jakarta, Ho Chi Minh City, Bangkok, Kuala Lumpur and Singapore. |