Protective Coating Suppliers Australia
Find where to buy products from Australian suppliers, including: distributors, industrial manufacturers, bulk supplies and wholesalers of raw ingredients & finished goods.
Search for products or services, then visit the suppliers website for prices, SDS or more information. You can also view suppliers in NZ, UK or the USA.
Product | Description | |
---|---|---|
Easy Coat Sealer - Gloss Seal Quick enquiry Where to buy Suppliers range | EASY COAT SEALER is a ready-to-use clear and semi viscous acrylic polymer and solvent emulsion formulated to provide economical coverage whilst imparting a lasting protective seal to most hard and/or porous surfaces. NOTE: This product is highly flammable and should be used & stored away from ALL sources of flame or ignition. Typical coverage is between 12 to 20 m2 per litre. Prior to application of EASY COAT SEALER it is vital to thoroughly clean the surface using an approved Able Westchem detergent and allow overnight to dry. Also if previous coatings have been applied these must be removed using the appropriate Able Westchem stripper (AC800). EASY COAT SEALER should only be applied to clean dry surface. For most applications two coats is normally sufficient leaving at least an hour between coats, however, some surfaces may require further coats to provide an impervious coating. EASY COAT SEALER should normally be applied using a lambs wool applicator or roller, or good quality paintbrush. Spray applications are not recommended because of fire risk however this product is compatible with this method of application otherwise. EASY COAT SEALER is NOT suitable for use on vinyl, cork, linoleum or timber surfaces. EASY COAT SEALER should only be applied to surfaces with temperatures between 10-30 degrees Celsius with moisture content between 5 -15%. A moisture meter is recommended to indicate curing conditions. Airflow is required to aid the drying process however too much air flow can cause the coating to dry too quickly. Pack Sizes: 5 Litre, 20 Litres, 205 Litre Drums. Product ID: WC1053. Chemicals By Industry, Universal Products. | Australia Wide |
Gloss Seal Quick enquiry Where to buy Suppliers range | GLOSS SEAL is an all weather high solids acrylic polymer and solvent emulsion formulated to provide a long lasting and UV stabilised protective seals on most concrete, marine and sports court surfaces such as indoor basketball and netball courts. NOTE: This product is highly flammable and should be used & stored away from ALL sources of flame or ignition. Typical Concrete & Marine coverage is 5 m2 per litre per coat which translates to 1 x 20 litre bucket for every 50m2. Prior to application of GLOSS SEAL it is recommended to thoroughly clean the surface using an approved Able Westchem detergent and allow overnight to dry. GLOSS SEAL should only be applied to clean dry surface. For most applications two coats is normally sufficient leaving at least an hour between coats, however, some surfaces may require further coats to provide a higher gloss coating. GLOSS SEAL should normally be applied using a lambs wool applicator or roller, or good quality paintbrush. Spray applications are not recommended (unless used by a Professional) because of fire risk however this product is perfectly compatible with the spay method of application otherwise. GLOSS SEAL should be stirred or shaken well before use and only be applied to surfaces with temperatures between 10 _ 30 degrees Celsius with moisture content between 0 -15%. Pack Sizes: 5 Litre, 20 Litres, 200 Litre. Product ID: WC1052. Chemicals By Industry, Universal Products. | Australia Wide |
GMS-AF01 - 40% Quick enquiry Where to buy Suppliers range | A food additive (40% GMS) used as a thickening, emulsifying, anticaking, and preservative agent; an emulsifying agent for oils, waxes, and solvents; a protective coating for hygroscopic powders; a solidifier and control release agent in pharmaceuticals; a Main Uses: Emulsifier. Other Names: Glycerol Monostearate. Cas No. 31566-31-1. Product Category: Emulsifiers. PACK SIZES AVAILABLE: 25kg Bags | Australia Wide, offices in Sydney & Melbourne |
GMS-CF01 - 95% Quick enquiry Where to buy Suppliers range | A food additive (95% GMS) used as a thickening, emulsifying, anticaking, and preservative agent; an emulsifying agent for oils, waxes, and solvents; a protective coating for hygroscopic powders; a solidifier and control release agent in pharmaceuticals; a Main Uses: Emulsifier. Other Names: Glycerol Monostearate. Cas No. 31566-31-1. Product Category: Emulsifiers. PACK SIZES AVAILABLE: 25kg Bags | Australia Wide, offices in Sydney & Melbourne |
GMS-TF01 - 60% Quick enquiry Where to buy Suppliers range | A food additive (60% GMS) used as a thickening, emulsifying, anticaking, and preservative agent; an emulsifying agent for oils, waxes, and solvents; a protective coating for hygroscopic powders; a solidifier and control release agent in pharmaceuticals; a Main Uses: Emulsifier. Other Names: Glycerol Monostearate. Cas No. 31566-31-1. Product Category: Emulsifiers. PACK SIZES AVAILABLE: 25kg Bags | Australia Wide, offices in Sydney & Melbourne |
Rust Evaporator Quick enquiry Where to buy Suppliers range | RUST EVAPORATOR is a NON HAZARDOUS rust removing and preventing concentrate used for descaling and oxide & rust removal from most ferrous and steel items. For use in a soak bath situation. Use with confidence as a non hazardous and effective treatment to descale boilers, heat exchanges and to clean and rusty but valuable items such as car parts, tools and equipment. The non dangerous liquid is not normally subject to any special disposal considerations and is generally safe on surfaces include aluminum, iron, steel, brass, copper, plastic, rubber, chrome, or oxide free paint. Use this product via Soak Method to remove rust from items. Simply prepare a solution of the product with water and immerse or fill item with liquid until the item is free of rust and debris. Once the item is clean allow it to air dry to form a protective coating that greatly reduces oxidization. This product is generally safe for use on most parts and equipment that are not harmed by water alone. Generally safe surfaces include aluminum, iron, steel, brass, copper, plastic, rubber, chrome, or oxide free paint. Soak Bath Solutions - 1 part product to 7 parts water. Radiator & Exchange Flush 1 part to 7 parts water. Tips. Tip: 1 - This product can be reused; when the soak bath solutions activity reduces simply add more concentrate. Tip: 2 - Warm water produces faster results than cold water; very cold will stop the product from working entirely. Pack Sizes: 5 Litre, 20 Litres, 205 Litre Drums, 1000 Litres. Product ID: WC1003. Chemicals By Industry, Workshop. | Australia Wide |
Sanvert - Rust Converter & Passivator Quick enquiry Where to buy Suppliers range | SANVERT is clear mobile liquid which when applied to rust or bore stains removes the rust and leaves a protective coating when rinsed off with fresh water (inhibited). SANVERT can be used for the removal of rust stains on fishing boats, ships, platforms, trailers, marine equipment, blending and mixing tanks, metal tools etc. SANVERT can also be used as a porcelain and tile cleaner to remove hard water scales. Spray neat directly onto affected areas. Apply with brush to more severely affected areas. Leave it on for 10 to 15 minutes. Wash off with pressure hose. SANVERT will quickly remove surface rust stains and convert the residual rust into a protective phosphate coating. Once the surface is dry, a primer and/or overcoat/s can be applied if required. Pack Sizes: 5 Litre, 20 Litres, 205 Litre Drums. Product ID: SC830. Chemicals By Industry, Marine, Chemicals By Industry, Workshop. | Australia Wide |