Find where to buy products from Australian suppliers, including: distributors, industrial manufacturers, bulk supplies and wholesalers of raw ingredients & finished goods.
Search for products or services, then visit the suppliers website for prices, SDS or more information. You can also view suppliers in NZ, UK or the USA.
| Product | Description | |
|---|---|---|
| Easy Coat Sealer - Gloss Seal | EASY COAT SEALER is a ready-to-use clear and semi viscous acrylic polymer and solvent emulsion formulated to provide economical coverage whilst imparting a lasting protective seal to most hard and/or porous surfaces. NOTE: This product is highly flammable and should be used & stored away from ALL sources of flame or ignition. Typical coverage is between 12 to 20 m2 per litre. Prior to application of EASY COAT SEALER it is vital to thoroughly clean the surface using an approved Able Westchem detergent and allow overnight to dry. Also if previous coatings have been applied these must be removed using the appropriate Able Westchem stripper (AC800). EASY COAT SEALER should only be applied to clean dry surface. For most applications two coats is normally sufficient leaving at least an hour between coats, however, some surfaces may require further coats to provide an impervious coating. EASY COAT SEALER should normally be applied using a lambs wool applicator or roller, or good quality paintbrush. Spray applications are not recommended because of fire risk however this product is compatible with this method of application otherwise. EASY COAT SEALER is NOT suitable for use on vinyl, cork, linoleum or timber surfaces. EASY COAT SEALER should only be applied to surfaces with temperatures between 10-30 degrees Celsius with moisture content between 5 -15%. A moisture meter is recommended to indicate curing conditions. Airflow is required to aid the drying process however too much air flow can cause the coating to dry too quickly. Pack Sizes: 5 Litre, 20 Litres, 205 Litre Drums. Product ID: WC1053. Chemicals By Industry, Universal Products. |  Australia Wide |
| Gloss Seal | GLOSS SEAL is an all weather high solids acrylic polymer and solvent emulsion formulated to provide a long lasting and UV stabilised protective seals on most concrete, marine and sports court surfaces such as indoor basketball and netball courts. NOTE: This product is highly flammable and should be used & stored away from ALL sources of flame or ignition. Typical Concrete & Marine coverage is 5 m2 per litre per coat which translates to 1 x 20 litre bucket for every 50m2. Prior to application of GLOSS SEAL it is recommended to thoroughly clean the surface using an approved Able Westchem detergent and allow overnight to dry. GLOSS SEAL should only be applied to clean dry surface. For most applications two coats is normally sufficient leaving at least an hour between coats, however, some surfaces may require further coats to provide a higher gloss coating. GLOSS SEAL should normally be applied using a lambs wool applicator or roller, or good quality paintbrush. Spray applications are not recommended (unless used by a Professional) because of fire risk however this product is perfectly compatible with the spay method of application otherwise. GLOSS SEAL should be stirred or shaken well before use and only be applied to surfaces with temperatures between 10 _ 30 degrees Celsius with moisture content between 0 -15%. Pack Sizes: 5 Litre, 20 Litres, 200 Litre. Product ID: WC1052. Chemicals By Industry, Universal Products. | Australia Wide |
| Sanvert - Rust Converter & Passivator | SANVERT is clear mobile liquid which when applied to rust or bore stains removes the rust and leaves a protective coating when rinsed off with fresh water (inhibited). SANVERT can be used for the removal of rust stains on fishing boats, ships, platforms, trailers, marine equipment, blending and mixing tanks, metal tools etc. SANVERT can also be used as a porcelain and tile cleaner to remove hard water scales. Spray neat directly onto affected areas. Apply with brush to more severely affected areas. Leave it on for 10 to 15 minutes. Wash off with pressure hose. SANVERT will quickly remove surface rust stains and convert the residual rust into a protective phosphate coating. Once the surface is dry, a primer and/or overcoat/s can be applied if required. Pack Sizes: 5 Litre, 20 Litres, 205 Litre Drums. Product ID: SC830. Chemicals By Industry, Marine, Chemicals By Industry, Workshop. | Australia Wide |
| Able Spatter-Guard | ABLE SPATTER GUARD is a highly effective water-based product used to help prevent MIG or STICK welding spatter from sticking to metal, welding tips, nozzles & metal equipment after being sprayed with this product. ABLE SPATTER GUARD is non-toxic and silicone free blue liquid. This product also contains an inbuilt corrosion inhibitor to help prevent flash rusting and keep your metal rust free for longer when storing. Use product as received. Apply to metal surface via a trigger spray ensuring a thin and uniform coat and weld as normal. There is no need to allow the surface to dry before starting to weld. This product can also be used to treat tips and welding nozzles to help stop welding spatter from adhering and also to protect nuts, bolts and mild steel from corrosion when in storage. Pack Sizes: 5 Litre, 20 Litres. Product ID: WC1082. Chemicals By Industry, Building & Construction, Chemicals By Industry, Mining, Chemicals By Industry, Workshop. | Australia Wide |
| CB-3046 FLUID | Acts as an anti-frizz agent. It is an optimized blend of silicones, suitable for water based and anhydrous formulations. It provides long-lasting frizz control, ability to maintain style, shine and curl definition. Moreover, it offers heat protection, enhanced hair alignment, natural look and feel and clear formulations. It is cold processed and is suitable for different hair-types. Dow Corning CB-3046 Fluid finds application in formulating leave-in hair products including creams, lotions, cuticle coats, pomades and non-aerosol sprays. Uses: Hair care (Shampoos, Conditioners, Styling). Group: Raw Materials; Silicones. Alternative Name: Dimethicone, Phenyl Trimethicone, Trimethylsiloxysilicate and Dimethiconol. Grade: Cosmetic Ingredients. CAS Number: 9006-65-9 2116-84-9, 56275-01-5, 70131-67-8. Pack Sizes: 250g, 500 grams, 1kg, 5 kgs, 10kg, 20kg. |  Australia & Worldwide |
| Conseal - Natural Look Sealer | CONSEAL is a water based sealant that is used to impart water resistance & surface protection properties to most porous building materials to maintain, enhance or preserve the materials original appearance & integrity. CONSEAL may be used with confidence on most types of concrete, liquid limestone, clay bricks, reconstituted limestone, mortar, render, & grout. CONSEAL may also be used to build hydrophobic qualities into render, shotcrete, concrete blocks, artificial stones or other building components during manufacture at level of 0.6 to 6%. Note: CONSEAL is not suitable for sealing dense stone such as marble. Use as received. Apply to clean surface by spraying, rolling or painting. Allow to dry and 24 hours to react invisibly with surface. One coat is usually sufficient for most surfaces. COVERAGE: 1 litre treats between 30 to 50m2 of surface depending on application method and porosity of surface treated. CONSEAL when admixed during manufacture of concrete or render should be used at level of 0.6% to 6% to impart water proofing to the concrete. Pack Sizes: 5 Litre, 20 Litres. Product ID: WC1051. Chemicals By Industry, Universal Products. | Australia Wide |
| LANOLUBE | LANOLUBE DESCRIPTION: Lanolube is a premium multifunctional lubricant and water proofing product that prevents corrosion and is non conductive. USE. Simply spray on to a clean dry surface and wait for solvent to evaporate before use. Can be used as a weld ant splatter, general lubrication all metal surfaces including wire rope, corrosion protection, coating for wood surfaces and canvas, thread anti-seize and battery terminal protection. SAFETY. Not classified as hazardous. Avoid inhalation of spray mist during use. Read Safety Data Sheet before use. Uses: Cleaning & Maintenance. Product ID: 502. Categories: Cleaning & Maintenance. |  Western Australia |
Our database is helping our users find suppliers everyday.
