Find where to buy products from Australian suppliers, including: distributors, industrial manufacturers, bulk supplies and wholesalers of raw ingredients & finished goods.
Search for products or services, then visit the suppliers website for prices, SDS or more information. You can also view suppliers in NZ, UK or the USA.
| Product | Description | |
|---|---|---|
| Aqua Guard Corrosion Inhibitor | AQUA GUARD CORROSION INHIBITOR is a water based immersion or contact inhibitor for the temporary corrosion inhibiting of both FERROUS & NON FERROUS metals. AQUA GUARD CORROSION INHIBITOR is a concentrate and should be diluted before use. This product is completely miscible with water and does not phase out with extreme fluctuations of temperature. The recommended dilution is 50mls of product made up to 950mls with clean soft water. In immersion tanks use above recommended dilution. Pack Sizes: 5 Litre, 20 Litres. Product ID: AC3991A. Chemicals By Industry, Workshop. |  Australia Wide |
| Beerline Cleaner & Cip | BEERLINE & CIP CLEANER is a red coloured CAUSTIC FREE heavy duty alkali solution containing low foaming surfactants & sequestering agents that efficiently cuts residue, fallout and build from beer-lines, tanks, vats and equipment into solution for efficient removal. BEERLINE CLEANING: Added to water at ~3-6mls per litre and draw into beer-lines before being allowed to soak for 5-10 minutes. Whilst soaking, agitation by gas injection will assist in loosening soil build-ups from line walls. Once soak time has occurred flush line thoroughly with water before reconnecting to the beer supply. This product is conveniently dyed RED so you can see the product in the lines or solution. Some stubborn lines may require chemical use at a higher concentration. TANK & VAT CIP CLEANING. Usage rates dependant on task. Kindly see your sales representative for application specific dilutions. Typical dilutions range from 0.2% to 4% w/w in warm water. Pack Sizes: 5 Litre, 20 Litres. Product ID: WC670. Chemicals By Industry, Brewing\, Distillery & Winery, Chemicals By Industry, Hospitality, Chemicals By Industry, Kitchen. | Australia Wide |
| Biocide BS | BIOCIDE BS is a broad spectrum biocide for the chemical control of a wide variety of algae, bacteria (including Sulphate reducing bacteria) and fungi commonly found in water process systems and storage tanks and systems. BIOCIDE BS is a high performance broad spectrum isothiazoline and is very effective at very low concentrations of 12 ppm active ingredient in the control of algae, bacteria and fungi. Recommendations are based with out knowledge of individual water contaminates. SLUG DOSING RECOMMENDATIONS: When the system is noticeably fouled: 20 to 70ppm for every 4000 Litres. Repeat until microbial control. INTERMITTENT MAINTENANCE DOSING RECOMMENDATIONS: After establishing microbial control: 13.5 to 80 ppm. Dose 2 to 3 times per week based on microbial control. Sulphate Reducing Bacteria control between 45 to 85 ppm. Pack Sizes: 5 Litre, 20 Litres, 205 Litre Drums. Product ID: AC309. Chemicals By Industry, Marine, Chemicals By Industry, Mining. | Australia Wide |
| Calcium Chloride 30% | CALCIUM CHLORIDE 30% is used as a pH adjustment and also in various industrial applications, such as paint production, waste water treatment and food production. Product is available in Bulk 20ft ISO Tanks. Use as per technical advice specific to industry only. Pack Sizes: 20 Litres, 1000 Litres, 22\,000KG ISO TANK. Product ID: AC386. Chemicals By Industry, Food & Beverage Processing, Chemicals By Industry, Mining, Chemicals By Industry, Universal Products, Chemicals By Industry, Workshop. | Australia Wide |
| Caustic Soda Prill - Sodium Hydroxide 99% | CAUSTIC SODA is white hygroscopic crystalline powder and readily absorbs water from the air, so it should be stored in an airtight container. It is very soluble in water with liberation of heat. Sodium hydroxide is frequently used as a cleaning agent where it is often called "caustic". It is added to water, heated, and then used to clean the process equipment, tanks, drains, etc. It can dissolve grease, oils, fats and protein based deposits. A sodium hydroxide solution will leave a yellow stain on fabric and paper. Concentration is varied according to water conditions, temperature and type of cleaning requirement with higher concentration used for better performance and hard stains. Pack Sizes: 5KG PAI Litre, 20KG PAI Litre, 25KG BAG. Product ID: AC291. Chemicals By Industry, Food & Beverage Processing. | Australia Wide |
| CIP Cleaner | CIP CLEANER is a red coloured CAUSTIC FREE heavy-duty alkali solution containing low foaming surfactants & sequestering agents that efficiently cuts residue, fallout and build from beer-lines, tanks, vats and equipment into solution for efficient removal. Being CAUSTIC FREE this product is safer on a wider array of surfaces and materials like seals and gaskets. PROCESS LINE CLEANING: Added to water at ~3-6mls per litre and draw into beer-lines before being allowed to soak for 5-10 minutes. Whilst soaking, agitation by gas injection will assist in loosening soil buildups from line walls. Once soak time has occurred flush line thoroughly with water before reconnecting to the supply. This product is conveniently dyed RED so you can see the product in the lines or solution. Some stubborn lines may require chemical use at a higher concentration. TANK & VAT CIP CLEANING: Usage rates dependant on task. Kindly see your sales representative for application specific dilutions. Typical dilutions range from 0.2% to 4% w/w in warm water. Pack Sizes: 20 Litres. Product ID: WC680. Chemicals By Industry, Brewing\, Distillery & Winery. | Australia Wide |
| CIP Cleaning Liquid Soln | CIP CLEANING LIQUID is a heavy-duty alkali solution efficiently cuts residue, fallout and build from process lines, tanks, vats and equipment into solution for efficient removal. This product is safer on a wider array of surfaces and materials. Usage rates and soak time is depending on area of application, type of material and condition. Kindly see your sales representative for application specific dilutions or trial before use. Typical dilutions range from 0.2% to 10% w/w in warm water. Pack Sizes: 20 Litres. Product ID: AC254. Chemicals By Industry, Brewing\, Distillery & Winery. | Australia Wide |
| Cleanoxide | Strength: 1 tablet treats up to 2000 Litres. Uses: Cleanoxide is your solution for treating rain water tanks, boat water tanks, food processing areas, agricultural applications across industries such as poultry, meat, fishing to name a few. Ideal for when you need to do a shock treatment. Cleanoxide, is always in stock, it is a Western Australian produced product. Group: Type: Biodegradable. Pack Sizes: Pack Sizes: 25 - 5 x 20g tablets. Category: Water treatment and Swimming Pool chemicals. |  Balcatta WA |
| Fire Fighting Foam | FIRE FIGHTING FOAM is an A-Class foam concentrate which is suitable for A-Class materials i.e. Bushfire/wildfire, paper, wood and structural fires. FIRE FIGHTING FOAM is economical and versatile foam concentrate. FIRE FIGHTING FOAM is made in Australia to A.S. 1792-1976 standard using completely bio degradable materials. Based on a combination of coconut surfactants this product exhibits fast foaming properties. This product is nontoxic and no subject to a special disposal consideration. FIRE FIGHTING FOAM is harmless to environment and free from fluorine and glycol when used as directed. Directions for use: FIRE FIGHTING FOAM concentrate can be added to full tanks of water or proportioned through foam making equipment. Recommended rates by volume are: MOPPING UP 0.25%. INITIAL 0.50%. BACK BURN 0.75%. PROTECTION 1.0%. FIRE FIGHTING FOAM is usable at Low, Medium and High Expansion across most types of situations involving Class A fires. FIRE FIGHTING FOAM can be used with tap water, sea water and brackish water at between 1% to 4%. Pack Sizes: 20 Litres, 205 Litre Drums, 1000 Litres. Product ID: WC475. Chemicals By Industry, Universal Products. | Australia Wide |
| Fueltreat Biocide | FUELTREAT BIOCIDE is a specially designed liquid biocide against micro-organisms contaminating fuel storage tanks and systems. FUELTREAT BIOCIDE is effective at low use levels, against microbial species commonly encountered in fuel systems, including bacteria, yeast, and mould. FUELTREAT BIOCIDE is designed to cause inhibition of microbial growth upon contact and quickly result in cell death. The exact time to kill all microbes in a fuel will vary but will typically be between 8 and 36 hours. FUELTREAT BIOCIDE is effective in systems containing both fuel and water. Unlike other fuel treatment biocides, the active ingredients in FUELTREAT BIOCIDE are not deactivated by water. Uses as required. Ensure correct PPE is worn. Pack Sizes: 20 Litres. Product ID: AC3091. Chemicals By Industry, Marine, Chemicals By Industry, Mining. | Australia Wide |
| GREASE LIFTER | Solvent Based Degreaser. Description. This is a powerful blend of solvents and emulsifying surfactants designed for cleaning, dispersing and degreasing operations by soak, spray or brush application. It has the following features: Low flammability (high flash point). Safe on all metals. Will not damage paintwork when used as directed. Rinses off easily in cold water (even seawater). Rapidly dissolves most oils, greases, lubricants etc. Low evaporation rate. Low electrical conductivity. Contains no chlorinated solvents. Grease Lifter is ideal for general clean-up operations on engines, heavy machinery, compressors and workshop equipment, floors and driveways. It is suitable for cleaning bilges and tanks, and for treating oil spills on decks and piers. Grease Lifter is recommended as a pre-cleaning detergent prior to alkaline cleansing or decarbonising operations. It can also be used for dewaxing vehicles and spot cleaning and degreasing of painted surfaces, providing there is an immediate cold water rinse afterward. Use. For heavy soiling, apply by brush allowing Grease Lifter to penetrate for 1-2 minutes, then hose off with a strong jet of water. Safety. Grease Lifter contains hydrocarbon solvents. Read Material Safety Data Sheet before use. Prolonged exposure to the skin may remove natural fats and cause irritation. Avoid contact with eyes, and inhalation of spray mist. Uses: Industrial Products. Product ID: 544. Categories: Industrial Products. |  Western Australia |
| Hook & CIP Cleaner | HOOK & CIP CLEANER is a high alkaline surfactant based concentrate used for the efficient stripping of fats, protein, carbon, and miscellaneous organic build-up from steel and plastic in food processing areas. SOAK OR DIP TANKS (Hooks & Gambrels). Dilute: At the ratio of 1 part product to 10 parts water in soak bath. Can be used in cold bath but overall performs will be better if the bath is heated to 70-80C. TIP: As the contamination within the bath increases extra product will need to be periodically added to offset fat build-up. Excessive contamination will require a complete change of dilution bath.Once surface is clean flush clean with copious amounts of potable water. SMOKE HOUSES. Spray, Foam, Circulate or Brush on with hot water at ratio of 2% to 8% v/v. Agitate and allow 5 to 10 minutes dwell time. Once surface is clean flush clean with copious amounts of potable water. Pack Sizes: 5 Litre, 20 Litres, 205 Litre Drums. Product ID: WC650. Chemicals By Industry, Abattoir, Chemicals By Industry, Food & Beverage Processing. | Australia Wide |
| Marazyme BTC - Enzyme Cleaner | MARAZYME BTC Enzyme Cleaner is a cleaning agent used in septic systems, Aaerated Wastewater Treatment Systems (AWTS ), biological toilet systems, absorption trenches, grease traps & drains etc. This product contains bio active ingredients that eats fats, oils, grease and stains and has natural apple scent. Septic Systems / AWTS / Absorption Trenches: Add an initial prime of 4lt of MARAZYME BTC per septic tank via TOILETS AND DRAINS leading into the system. For systems with multiple tanks or tanks larger than 6,000lt consult your Technical representative for application rates. Continue with a maintenance program of 150ml of MARAZYME BTC per day per week. A minimum period of 3-4 months is required to restore absorption trenches. Grease Traps:.... Toilet, Washroom & General cleaning: Use as received daily as any normal toilet/urinal cleaner. Dilute 100ml MARAZYME BTC per 1lt water (1:10) for general cleaning of hard surfaces including ablutions block applications like, showers, sinks, basins, benches, walls and floors. Rinsing is recommended. For high pressure cleaning dilutions can be up to 1:50. DO NOT USE IN FOOD PREP AREAS WITHOUT RINSING AFTERWARD WITH POTABLE WATER. Odour Control: .... conditioning of ponds in poor condition consult your Technical representative for application rates based on pond capacity and effluent flow. For maximum benefit MARAZYME BTC CONCENTRATED dilutions are required. A healthy and efficient pond requires 1lt of MARAZYME BTC per 20,000 lt of effluent flow. If pH fluctuates outside the range of pH 6.5 to pH 8.5 consult your Technical representative. Landfills: Spray landfill sites daily with 1lt of MARAZYME BTC per 1,000 M2. Pack Sizes: 5 Litre, 20 Litres, 205 Litre Drums. Product ID: AC9311. Chemicals By Industry, Abattoir, Chemicals By Industry, Food & Beverage Processing, Chemicals By Industry, Kitchen, Chemicals By Industry, Marine, Chemicals By Industry, Mining. | Australia Wide |
| Marazyme Shock Powder | MARAZYME SHOCK POWDER is designed to help initiate and maintain bacterial degradation and digestion of oil, grease and bottom sludge in water catchment and treatment areas. Ideal for use in treatment ponds, grease traps, pools, tanks, interceptors, sewage lift stations, sewer lines and POTW systems. This product not only helps aerobic digestion but also helps to reduce & eliminate odours such as Hydrogen Sulphide & Ammonia whilst helping to prevent corrosive acid attack on concrete piping and other pumping equipment. Broadcast a small amount of MARAZYME SHOCK POWDER on to the surface of the ponds or tanks to cover the surface area. Most users treat ponds or tanks daily at a rate sufficient to cover surface with light coating. The required dosage & frequency of application for an efficient treatment varies depending on volume, surface area, flow rate and temperature. Regular treating is better than infrequent treating for optimum performance. Consider also using slow release tablets for treating over weekends or holidays. For grease traps the tanks must be recently cleaned or serviced to achieve the best results. Broadcast powder into empty tanks then use as normal and dose weekly or as required. Use as per the technical advice specific to industry only. Pack Sizes: 10KG. Product ID: AC9315. Chemicals By Industry, Abattoir, Chemicals By Industry, Marine. | Australia Wide |
| Phosclean Descaler | PHOSCLEAN is an AQIS compliant CIP acid cleaner specifically designed for the removal of scale, rust & precipitates from lines and equipment & tanks in food, beverage & dairy industries. RUST CONVERSION (Metal Priming & Preparation). Remove oil, grease & loose scale with a free rinsing water based alkaline degreaser such as PREDATOR, TRIPLE 2 or ... STAIN REMOVING & GENERAL CLEANING. Dilute up to 1:10 with warm water, however a dilution of 1:4 is recommended for most applications. Apply diluted PHOSCLEAN & allow a few minutes to work & then wipe or hose off. Do not allow to dry. Deeply encrusted stains may need further applications & some slight agitation with a brush or light sourer to promote penetration. Remember to keep the surface wet with product & do not allow to dry as process will halt. TIP: Always pre test an inconspicuous test area before tackling your job. CIP CLEANING. Pre wash using AQIS Alkaline Detergent such as AC222 or Hercules then flush. Then use PHOSCLEAN at a dilution to suit your requiremts (from neat to 1:100). TIP: Always allow up to 5 minutes of contact time to dissolve scale & precipitates. Always rinse food contact surfaces with potable water after use. Always pH adjust waste water to pH 7 with sodium hydroxide before release/ disposal. SITUATIONS TO AVOID IN USE. Avoid contact with Sodium Hypochlorite solutions (bleach), colorbond, anti-fouling paint, marble, anodised or galvanised surfaces & aluminium. Always pre test an inconspicuous test area before tackling your job. Pack Sizes: 5 Litre, 20 Litres, 205 Litre Drums. Product ID: WC861. Chemicals By Industry, Building & Construction, Chemicals By Industry, Food & Beverage Processing, Chemicals By Industry, Hospitality, Chemicals By Industry, Janitorial & Maintenance, Chemicals By Industry, Kitchen, Chemicals By Industry, Marine, Chemicals By Industry, Mining, Chemicals By Industry, Workshop. | Australia Wide |
| Phosclean Detergent | PHOSCLEAN DETERGENT is a commercial use, heavy-duty solution of phosphoric acid plus low foaming surfactants. It is commonly used to cut residue, fallout and buildup from beer-lines, tanks, vats and equipment in to solution for efficient removal. Further, it is specially designed to remove rust stains from paint, fiberglass, metal and most plastics. PHOSCLEAN DETERGENT is very versatile & can be used in spray, circulation, soak, brush or hand wipe applications to remove hard water scales like calcium & carbonates if used on a regular basis. SITUATIONS TO AVOID IN USE. Avoid contact with Sodium Hypochlorite solutions (bleach), colorbond, anti-fouling paint, marble, anodised or galvanised surfaces & aluminium. Always pre test an inconspicuous test area before tackling your job. Pack Sizes: 5 Litre, 20 Litres, 205 Litre Drums. Product ID: WC864. Chemicals By Industry, Abattoir, Chemicals By Industry, Building & Construction, Chemicals By Industry, Food & Beverage Processing, Chemicals By Industry, Janitorial & Maintenance, Chemicals By Industry, Marine, Chemicals By Industry, Mining, Chemicals By Industry, Workshop. | Australia Wide |
| Portable Toilet Additive | PORTABLE TOILET ADDITIVE is a highly effective toilet liquid that is used for the control of odour, this product also stimulates the breakdown of waste matter and toilet paper in waste holding tanks of cassette and portable toilets used in recreational vehicles, aircraft, and transportable toilets. This product is pH neutral and contains corrosion inhibitors so it will not damage your system and it also contains enzymes and biodegradable surfactant. When used at the recommended dosage rates is safe to discharge into sewerage systems, septic tanks or biological systems such as those at camp sites. Simply add the required amount according to the size of your cassette or portable toilet holding and then add 1-2 litres of water to ensure the liquid is evenly dispersed. You can now use the toilet as normal. Be sure to empty your holding cassette or portable toilet every 6 to 7 days into a designated sewerage acceptance point and never release to storm water system. Once the cassette or portable toilet has been emptied rinse well with fresh water. This product when used at the recommended dosage rate is safe to empty into authorised sewerage dump points, septic tanks or small biological systems on camp sites. PORTABLE TOILET ADDITIVE should be used at rate of 5ml per litre of holding tank capacity. For ease of dosage the product containers come with a handy pour back cap that holds ~25mL when full to the brim. Pack Sizes: 5 Litre, 20 Litres. Product ID: WC1199. Chemicals By Industry, Universal Products. | Australia Wide |
| Sanvert - Rust Converter & Passivator | SANVERT is clear mobile liquid which when applied to rust or bore stains removes the rust and leaves a protective coating when rinsed off with fresh water (inhibited). SANVERT can be used for the removal of rust stains on fishing boats, ships, platforms, trailers, marine equipment, blending and mixing tanks, metal tools etc. SANVERT can also be used as a porcelain and tile cleaner to remove hard water scales. Spray neat directly onto affected areas. Apply with brush to more severely affected areas. Leave it on for 10 to 15 minutes. Wash off with pressure hose. SANVERT will quickly remove surface rust stains and convert the residual rust into a protective phosphate coating. Once the surface is dry, a primer and/or overcoat/s can be applied if required. Pack Sizes: 5 Litre, 20 Litres, 205 Litre Drums. Product ID: SC830. Chemicals By Industry, Marine, Chemicals By Industry, Workshop. | Australia Wide |
| Klorman Watertech 200gm Trichloroisocyanurate Tablet | Minimum available chlorine is 890gm/kg Contains Isocyanuric Acid (stabiliser) Contains Isocyanuric Acid (stabiliser) low pH long lasting. Uses: Septic Tanks, Industrial applications. Alternative Names: TCCA Trichlor. Pack Sizes: 25kg. |  |
Our database is helping our users find suppliers everyday.
